In the article presents the results of studies on the effect of temperature and pressure on the chloride sublimation of zinc and lead from converter dusts of steel production. Currently, an objective necessity is the development of dust utilization technologies for converter steel production, with its further use in production and production of by-products. The use of dust allows not only to save natural raw materials, but also increases production efficiency and improves the environmental situation. The content of non-ferrous metals in dusts makes it difficult to process and use them in agglomeration or in blast furnace production, while the iron content in converter dusts (sludges) makes it possible to use them as promising metallurgical raw materials. Therefore, for a more complete processing of dusts, extraction of non-ferrous metals from them is proposed. The purpose of this work was to determine the possibility of extracting zinc and lead from sludges of the converter production by the method of chloride sublimation. We used dust containing: 86,3 % Fe2O3, 3,5 % FeO, 0,9 % Al2O3, 1,6 % CaO, 0,9 % MgO, 1,1 % MnO, 0,8 % SiO2, 4,4 % ZnO, 0,5 % PbO. The study was conducted in the temperature range 200-1600 degrees C and pressures of 0,01; 0,1 and 1 bar based on a complete thermodynamic analysis using the HSC – 5.1 software package. Finnish metallurgical company Outokumpu, based on the principle of minimum Gibbs energy. According to the results of the studies, it was found that, at normal pressure, lead chloride sublimationbegins at a temperature of 600 degrees С, and zinc - at 900 degrees С: a decrease in pressure to 0,01 bar reduces the temperature to 500 degrees С and 700 degrees С, respectively; lead chloride sublimation under equal conditions is more complete than zinc; To achieve zinc chloride distillation at the level of 90-96 %, the process must be carried out at 1145-1200 degrees С and pressure from logP = -2 to 1,2 bar, while the degree of lead chloride distillation is 99,8-100 %.

In Kazakhstan, within the framework of the Program «Development of domestic value and export-oriented industries», new modern dairy enterprises are being actively modernized and new modern dairy enterprises are being created, where membrane processes are being introduced to concentrate the components of milk. This is necessary for the rational and integrated use of raw materials, including through the processing of secondary resources, the main of which is whey. Improving the production processes of traditional food products and developing innovative ones is possible only with the use of the latest technologies and technological equipment. Membrane processes are widely used for the use of fractionation and concentration of liquid dairy products, which allows for a new solution to the processing of raw materials and opens up opportunities in the development of new types of food products. The article is devoted to the issue of production and processing of whey in Kazakhstan. The main types of membrane technologies and the advantages of their use in the dairy industry in the Republic of Kazakhstan are considered. The role of membrane technologies in the processing of whey is substantiated, various methods of introducing membrane processing methods to ensure the demineralization of whey, obtaining products with high biological value and consumer properties, reducing the cost of energy carriers, reducing the volume of raw materials in order to save transport costs, non-waste processing of milk solids, recycling water are described. This article analyzes the problems of using resource-saving membrane technologies in the production of dairy products in the Republic of Kazakhstan, ways to solve existing problems associated with increasing the economic efficiency of enterprises. The favorable impact of the use of membrane technologies on the social and environmental aspects of whey processing in the country is substantiated.