The article describes in detail the civil proceedings, the General characteristics of the participants of the process, the classification of persons involved in the case, the order of their participation in the proceedings, as well as their rights and obligations. Civil procedure is a system of legal norms regulating civil procedural actions and legal relations formed between the court and other participants of the process in the administration of justice in civil cases. The main purpose of this production is restoration of the violated right and protection o f interests protected by the law. Procedural actions shall be carried out in accordance with the procedure and strict procedure established by law. On the basis of the procedure established by law at all stages of the process, civil procedural relations arise, develop and cease.

The article consideres features of civil disputes with the banks about foreclose on hypothecary real estate. judicial practice on this category of cases.

In article it is shown that in a control system of efficiency of the company accurate focus on result and the coordinated movement of all organizational elements to the uniform purpose is. It is reached by creation of a tree of the purposes and definition of the most critical areas for control and control indicators of efficiency a consequence of that is the increase in cost of the company.

This article analyzes the essence of the concept of "packaging", made the systematization of approaches and the role of packaging in the course of treatment. According to research results, based on a critical analysis of the existing provisions of the creation of the package proposed by its own methodological tools, which brings together the work of the producers (designers, graphic designers) and marketers.

Аt present, dairy enterprises use a system for analyzing and monitoring critical control points, as well as a quality management system, to produce high-quality and safe products. These systems take into account factors that may affect the production process and other components by identifying hazards from the procurement of raw materials to the consumption of products for food. The purpose of the article is to study the role and necessity of applying quality and safety management systems at dairy enterprises and reducing the risk at all levels of production

The article analyzes not only the critical foundations of economic interests of the state, but also authorizes the economic security of the state and examines the most important areas of practical activity of the law enforcement agencies of the Republic of Kazakhstan, which provide legal protection of economic interests. The article deals with the issues related to the establishment of the status of law enforcement agencies that carry out the legal protection of the economic interests of the Republic of Kazakhstan. Some existing scientific research does not cover all issues related to the economic security of the Republic of Kazakhstan. The topic that is being explored here is often characterized by novelty, which is definitely actual.

The authors, based on analysis of the philosophy of the Eastern peripatetics, have shown that in the philosophical worldview of the middle ages Arabic magazynowanie there are aspects, which indicate that more needs to trace the Genesis of the problem of reason in Arabic philosophy of the middle ages. The article notes that the world of the XXI century is the world of post-industrial, information society, which constantly raises logical and epistemological problems in the field of science and philosophy. Therefore, there is a need for a critical study of the history of this problem, its Genesis and development to identify positive potential and progressive ideas. In this context, the analysis and study of the problem of reason and logic, the epistemological ideas of al-Kindi, al-Farabi, Ibn Sina, Ibn Rushd of the Arabic-speaking middle ages is not only of historical and philosophical interest, but also of actual significance. In this article, the authors consider the problem of reason in the worldview of representatives of Eastern peripatetism of the medieval Arabic-language philosophy of al-Kindi, al-Farabi, Ibn Sina, Ibn Rushd, based on the ideas of Aristotle. The paper presents the historical and philosophical aspect of the problem of reason inherent in the Arabic-speaking middle ages. The cognitive interest of representatives of Eastern peripatetism is connected with philosophy, questions of logic, and the doctrine of reason. Arabic-speaking philosophers in the middle ages were engaged in understanding the epistemological abilities of man, al-Kindi, being the founder of Arabic-speaking philosophy, put forward the idea of types of mind and stages of knowledge. Al-Kindi's positive philosophical ideas were further developed in al-Farabi's worldview. The thinker considered the priority of rational knowledge to be indisputable, in addition, al-Farabi showed an interest in logic, the theory of knowledge and human cognitive abilities. Al-Farabi's philosophy had a significant influence on Ibn Sina's philosophical views. The rationalism of Ibn Sina was also manifested in a very high assessment of logic, the thinker considered logic an introduction to philosophical knowledge. Ibn Rushd in his work developed along the same peripatetic path as his predecessors al-Kindi, al-Farabi, and Ibn Sina. The authors attempt to show that the problem of reason in philosophy and science has its Genesis, associated with the teachings of Eastern peripatetics of the Arabic-speaking middle ages. The teaching of the Arabic-speaking philosophers of the middle ages about the cognitive power of reason, despite the theological context and logical-epistemological limitations, had a progressive role in the history of philosophyd

There are many examples of crises and catastrophes in the history of mankind. Almost the entire spectrum of natural disasters is possible in Kazakhstan. In particular, earthquakes, floods, fires in forests and steppes, snowstorms, and others. In all mountain and foothill zones, there is a danger of landslides, the threat of snow drift. In addition, there are situations that have arisen for man-made reasons. These catastrophes are the result of human activity. Such extreme situations require the concentration of all physical and psychological capabilities of a person. This is especially important for military personnel who often operate in extreme or critical conditions. Psychological readiness to solve such situations gives the individual confidence in the correctness of their own actions and, in the end, leads to a successful result. The purpose of this article is to present the results of research in the framework of a master's thesis. The main focus is on the analysis of the features of psychological training of military personnel to act in an extreme situation. The studied problem is revealed by the authors from the point of view of modern approaches to the psychological training of military personnel in a critical situation. The research methods used (analysis, generalization, experiment) allowed us to reveal the depth of the problem relevant to military psychology. The research is based on the results of modern research by Kazakh and foreign scientists. Approaches to the interpretation of the essence of the content of the concept "extreme situation" are considered, and the factors that determine the specifics of psychological training of military personnel to act in a crisis are highlighted. The concept of "psychological readiness of military personnel to work in critical (extreme) situations" is defined. Statistical results of the experiment are presented. The experimental activity carried out in the course of experimental work has a high practical significance, since it was successfully tested through the implementation of the work of the military unit 3176 "K" in Pavlodar and can be used in the psychological training of military personnel. The article is devoted to the actual problem of psychology. The results presented in the article may be useful for military psychologists.

Main problem: In the 18th century, when industrial production began, the use of steam and mechanized production caused major changes in the economy. As a result, production costs decreased along with an increase in the quantity and quality of products. During this period, production underwent a revolutionary transition from manual labor to mechanization. The potential impact of Industry 4.0 on labor markets remains an under-explored scientific field. It is estimated that Industry 4.0 will lead to unemployment by changing the employment structure and will bring new structural problems in terms of unemployment and labor relations. Purpose: The purpose of the study was to establish the impact of Industry 4.0 on the labor market and identify the consequences of the impact. Methods: studied, the evolution of production development, when mass production with electricity led to the Age of Industry 2.0, and then the emergence of the digital revolution, the use of electronics and information technology in production processes, marked the beginning of the Age of Industry 3.0. It is expected, according to international experts, scientists, that automation and robotic production will have a serious impact on the unskilled workforce and cause a critical reduction in the labor force of vulnerable sectors of society, that is, women, migrants, youth and the elderly. Results and their significance: This study assessed the possible impact of the fourth industrial revolution on labor markets. Through a literature review and analysis of emerging trends in Industry 4.0, the risks, opportunities and challenges of the process are explored in a comparative perspective. It has been established that countries must correctly perceive the transformation of labor markets and take appropriate measures. Otherwise, the applied labor-based low-cost industrialization model will lose its comparative advantage

Main problem: Computer systems and technologies are changing our society significantly. These changes are interconnected with both social and production spheres. Innovative digital technologies have a huge impact on the labor market and professional activity, contributing to their transfer to the electronic environment. Using digital technologies, modern people set new goals and solve problems with an increasing speed of problem solving, capitalizing on the possibilities of collaborative distributed actions within networks. In this regard, new competencies of specialists are in demand. Purpose: The purpose of this study was to establish the impact of the fourth industrial revolution on the education system and the development of skills and thinking for learning. Methods: When conducting scientific research, economic and statistical methods were used. These methods were also used in comparative analysis, as well as in assessing data and indicators of the higher education system, taking into account the impact of the fourth industrial revolution. The analytical method was used to consider the characteristics and factors influencing the development of skills and thinking for learning in modern conditions. The abstract-logical method is used to identify problems affecting the development of the labor market under the influence of digital technologies. Results and their value: The result of the study is that conclusions are drawn about the upcoming changes. Automation and digitalization are likely to lead to significant unemployment in most countries, so adaptation innovation policies are needed to help offset unemployment due to digitalization. Governments need to invest heavily in higher education as an economic development tool for their citizens. Lifelong learning should be identified as a critical element of success in the era of the fourth industrial revolution. Curricula should develop digital skills and address workforce disruptions due to automation.

Currently, the problems of environmental safety are facing society. The industry develops every year. In this critical economic situation, the oil industry is a stimulant for the economic sector in Azerbaijan. The level of development of this industry is also relevant due to other reasons: sociological, technological and features of the economy of Azerbaijan. The production activity of oil processing, concentrating harmful substances and energy, is a source of man-made danger and pollution of the natural environment. The risk management process mainly consists of three stages - risk safety analysis, risk assessment, which is carried out in comparison of calculated and actual risk levels, the so-called acceptable risk levels and the adoption of appropriate regulations and management decisions. One of the factors that should be taken into account when assessing risk and safety is to determine the necessary costs. Since these costs are paid directly to the company, they try to minimize them as much as possible, which reduce the accuracy of risk assessment. One of the objectives of the study is to determine the optimal value of the necessary costs. It is established that the less reliable the method, the lower is the cost of its implementation. The methodological basis of the work was scientific works on these problems of scientists-economists, mathematicians on safety and risk assessment at industrial enterprises. When developing the presented methodology, computational algorithms developed by Dow Chemical were used. This company has collected a large volume of material on accident statistics, taking into account damages. Based on the obtained and experimentally verified data, a system of indices has been developed, an assessment of various indicators for qualitative and quantitative risk assessment of oil refineries. The analysis of the technogenic danger of oil refineries makes it possible to determine ecological and economic losses and choose rational possibilities of acceptable risk. The required costs, depending on the level of risk, are determined based on an increase in the accuracy of calculating the probability of occurrence of the cause of risks. The article examines the relationship between the expected level of risk and economic losses during oil refining in separate technological units, which allow determining the required level of risk and the expected economic damage.

Singularly perturbed partial differential equations with small parameters with higher derivatives deserve special attention, which often arise in a variety of applied problems and are used in describing mathematical models of diffusion processes, absorption taking into account small diffusion, filtration of liquids in porous media, chemical kinetics, chromatography, heat and mass transfer, hydrodynamics and many other fields. It is necessary to consider the creation of an asymptotic classification of solutions of singularly perturbed equations using a well-known approach to solving the boundary value problem. In this case, the singular problem is understood as the problem of constructing the asymptotics of the solution of the Cauchy problem for a system of ordinary differential equations with a small parameter with a large derivative. The asymptotics of the solution in all cases is based on the last time interval or the construction of a boundary value problem for a system with a weak clot in an asymptotically large time interval. Purpose - to construct and substantiate the asymptotics of solving a singular initial problem for a system of two nonlinear ordinary differential equations with a small parameter; To date, a number of methods have been developed for constructing asymptotic expansions of solutions to various problems. This is the method of boundary functions developed in the works of A.B. Vasilyeva, M.I. Vishik, L.A. Lusternik, V.F. Butuzov; the regularization method of S. A. Lomov, methods of averaging, VKB, splicing of asymptotic decompositions of A.M. Ilyin and others. All the above methods allow us to obtain asymptotic expansions of solutions for wide classes of equations. At the same time, such singularly perturbed problems often arise, to which ready-made methods are not applicable or do not allow to obtain an effective result. Therefore, the development of methods for solving equations remains a very urgent problem. As a result of the study, an algorithm for constructing an asymptotic classification of the initial solution of the problem with a singular perturbation is given, and approaches to estimating the residual term are also shown.

The development of extraction techniques of medical plants aims to maximize the bioactive compounds production. Тechnologies in this area of industry have not high enough еfficiency factor. In some cases, it reaches only 40-50 %. Therefore, development of new methods to effectively extract different compounds from plant material and their input into large-scale industry is of great importance. The goal is to determine an effective and suitable technology for extracting bioactive compounds from medical plant. This is a narrative review paper which focuses on different extraction methods of medical plant. To find relevant articles for this narrative review, 73 articles were reviewed. Of these, 14 irrelevant documents were discarded. This review analyses various extraction processes to guide the selection of suitable methods for various types of medical plants and applications. This is done by outlining traditional and modern methods of extraction techniques, exploring the importance of solvents for extraction, and comparing novel and alternative methods of extraction. In conclusion, based on the current knowledge, solvent extraction is the most common method for medical plants extraction. Enzymatic hydrolysis and supercritical extraction are advanced techniques with high yield of compounds. However, more research is needed for some modern extraction methods.

Globalization is an integral part of our life. Therefore, today the relevance of learning foreign languages, in particular English, is beyond doubt, as interest in foreign culture, education, travel, life and work abroad increases. It is known that English is the most widespread international means of communication (including information technology and web space), for most of the population it is the native or state language. This is due to historical, political and geographical prerequisites, as well as socio-economic and cultural development. Proficiency in English opens up great prospects for those who know, but not every person chooses a linguistic direction of study when entering a higher educational institution. Mastering English is a laborious process. In universities of non-linguistic areas, one of the main problems for students is the so-called language anxiety and psychological barriers, especially for those students for whom English is not a core subject or direction of future activity. Overcoming language anxiety and psychological barriers continues to be an urgent issue in pedagogical psychology and the educational process of higher educational institutions. Therefore, the task of the teacher is to create such conditions in his classes so that the student has a desire to learn, develop himself and improve himself. It is necessary to form motivation for conversational skills through psychologically thought-out techniques and methods. The task of the teacher is to direct the student from a conniving and indifferent attitude to study to a conscious and positive attitude. To implement the above, the teacher needs to form the old motives and stimulate new, positive ones. The encouragement of positive manifestations of emotions should be supported, stimulated and helped to realize these emotions by the teacher in the educational process. For example, simple tasks, but at the same time fascinating, the manifestation of sincere emotions in the classroom by the teacher himself and his personal examples inspire students to pronounce their state of mind and experiences. Encouraging and highlighting the activity of students also helps to increase the motivation of learning, especially if they have creative ideas that differ from other fellow students. The purpose of the article is to describe the methods of teaching conversational skills, their advantages and disadvantages and to consider in detail the overcoming of language barriers when learning a foreign language. The methodological basis of the research was the works of such authors as: H.F. Makaev, O.S. Zorkina, V.P. Ipatova, L.V. Barinkova, E.V. Zarubina, E.I. Kaputskaya, E.I. Passov, E.G. Asimov, A.N. Shchukin and others. Critical analysis of scientific and methodological literature on the problem, study and generalization of positive experience of teachers; collection of empirical information, experiment, quantitative and qualitative data analysis. The results of the study can be used in the process of developing practical recommendations for psychological work with students in order to increase their motivation to learn a foreign language. In addition, these results can be used by teachers to correct and improve the effectiveness of the educational process.

The paper considers two data-driven methods for anaphora resolution of Kazakh texts. These methods are based on machine learning with annotated corpora and using no additional information except linguistic features. The first method uses Support Vector Machine as learning and classifying algorithms, the second method uses Decision Tree inducer. We evaluate the performance of the methods with several feature sets and corpora. Feature sets included morphological, syntactic, and semantic features. In this paper We also evaluate how semantic features, namely semantic roles, impact the performance of anaphora resolution in Kazakh language. Experiments showed that precision of SVM is higher on experimental data for almost all cases. It was shown that semantic features enhance the performance of the methods for anaphora resolution of Kazakh texts. We have also calculated the optimal distance between the anaphor and the hypothetic antecedent and used it in our methods.

Injuries among domestic animals account for 50-70 % of all non-communicable diseases. Fractures of bones, mainly limbs, occur in 44.5 % of cases. The main goal of fracture treatment is to restore normal function and movement of the limb, and the ways in which this is done are varied. Preference is given to methods that do not constrain the movement of the limb, allowing the animal to use it during the treatment period. Purpose: This article discusses the method of bone osteosynthesis, which has proven itself in the treatment of bone fractures, and is relevant today in veterinary medicine. The main study was conducted on the basis of the veterinary clinic "Shans" in Pavlodar. For osteosynthesis, plates for osteosynthesis and screws made of titanium alloy were used. This is due to the fact that when in contact with each other, the metal that fixes bone fragments can oxidize. Animals come to the clinic as a result of injuries that lead to fractures. The most common causes include falls from a height, motor vehicles, careless or rough handling of animals, and contact with other animals. When a fracture is established by obvious signs or if a fracture is suspected, such patients are preliminarily sent for x-rays. Upon receipt of an X-ray image and with the consent of the owner of the animal, osteosynthesis is performed. When accessing bone fragments, the incision was made along the muscle fibers. Osteosynthesis was performed according to the method described by V.M. Shapovalov (2009). The general condition of the animals after osteosynthesis was restored after 3-5 days. All animals, after bone osteosynthesis, completely relied on the limb. Contractures of adjacent joints and muscle atrophy were not determined. Plain osteosynthesis of the femur, in the presence of the necessary instrument and consumables, is not very difficult to perform. Performing bone osteosynthesis in the early stages makes it possible to include the limb in the locomotory act, as a result of which the animal actively uses the limb during the rehabilitation period.

Main problem: humane pedagogical thinking seeks to embrace the immensity, and this is the strength of educational systems and processes born in its bowels. To actualize the value of self-disclosure of students’ innovative abilities with the accompanying, providing role of a teacher, it is necessary to recognize a one’s intellectual reflective mechanism as the main subject of education. Developed reflexive abilities are a logical condition for a person to independently overcome all sorts of difficulties in life and activity. Purpose: understanding and formalization of the “golden principles” of socio-natural thinking and activity of a human as a biological organism. Methods: the method of ascending from the abstract to the concrete, the method of transforming specific images of objects based on their abstract essence, the speculative language of schematic representation of a thought. Results and their significance: considering a high dynamics of technological changes in the world of activity, we accept the reflective ability for self-education as the main means to independently discover certain professional abilities necessary in life. This means that, first of all, students must learn how to learn, i.e. learn to think independently, critically perceive and transform the received information into knowledge, pose their own questions, offer a range of answers, logically formulate and coordinate different points of view, build knowledge together with others. Innovative methods and models of pedagogical activity encourage students’ innovative abilities which cause innovative and technological development of a country.

The relevance of this article is that the impact of human economic activity on the natural environment is becoming comparable in scale to geological factors. In this regard, the importance of protecting the biosphere has increased immeasurably. The earth is the only common home of all earthlings. Society, including us, cannot help but worry that the planet has approached a critical ecological threshold. The main goal of the research that we set for ourselves in this article is to create a predictive model for overcoming the environmental crisis in the following areas: environmental education, greening technologies, administrative and legal direction, international cooperation. To achieve the result, we tried to process as much information as possible, analyze the situation, draw appropriate conclusions and propose our own model for overcoming the environmental crisis. The hypothesis is that environmental pollution, improper disposal of household and industrial waste, and poor environmental culture have a detrimental effect on the ecology of the city, poisoning the environment and public health. The main research methods used were methods of empirical knowledge - these are observations, survey methods, questionnaires, as well as theoretical methods. The results of these studies can be used to inform the population about the impact of waste on human health, as well as the importance of storing, recycling and obtaining secondary raw materials, in order to reduce the amount of garbage on city streets. And also about the existence of unauthorized waste collection sites and administrative responsibility for the creation of such landfills in the city and in the surrounding area, this is an educational activity in all areas of education, starting from preschool institutions, the media, advertising agencies, NGOs, environmental authorities and also, using international experience, in the construction of a solid waste processing plant in his hometown.

The main problem: In modern conditions, the healthcare system of Kazakhstan is going through changes aimed at providing a high level of medical care and maintaining the health of the population. In the face of modern challenges such as technological innovations, demographic changes and global pandemics, it becomes critically important to analyze and adapt to new requirements. Understanding and adapting to these trends are critical steps for the successful development of the healthcare system in the future. This article examines the main trends in the development of the healthcare system in Kazakhstan and their impact on the provision of medical services and the level of public health. The article focuses on the essence of the main problem facing the healthcare system of the Republic of Kazakhstan at the present time. The relevance of the topic is manifested in the context of a dynamically changing socio-economic environment, which puts pressure on the existing health care system. Demographic changes, the growth of chronic diseases and the need to introduce modern technologies create challenges that require a comprehensive analysis and effective strategies for the development of the system. Purpose of the article: The purpose of the article is to analyze and systematize the main trends in the development of the healthcare system in Kazakhstan, taking into account current challenges and changes in the global healthcare paradigm. The authors seek to identify key areas of development, as well as provide practical recommendations for improving the system. Methods: The study is based on a comprehensive methodological approach, including analysis of health statistics, economic analysis of expenditures and financing, as well as a review of modern scientific publications. Additionally, methods of comparative analysis with international health standards are used. Results and their significance: The article identifies not only the main problems in the healthcare system of Kazakhstan, but also provides analytical results expressed in the form of identified development trends. The work is important for developing strategies to improve the quality and accessibility of medical services in the country. The recommendations proposed by the authors can serve as a basis for making effective decisions in the field of healthcare in modern conditions.