The purpose of this article is to review the main possible areas of international cooperation of the law enforcement agencies of the Commonwealth of Independent States in combating human trafficking. The authors, based on an analysis of the existing international instruments to combat trafficking in persons, reveal details of the main directions of the international cooperation of the CIS countries’ law enforcement bodies, implemented through: the partial transfer of competence, a joint investigation of criminal cases, as well as the extradition of a person for criminal prosecution.

The article describes in detail the civil proceedings, the General characteristics of the participants of the process, the classification of persons involved in the case, the order of their participation in the proceedings, as well as their rights and obligations. Civil procedure is a system of legal norms regulating civil procedural actions and legal relations formed between the court and other participants of the process in the administration of justice in civil cases. The main purpose of this production is restoration of the violated right and protection o f interests protected by the law. Procedural actions shall be carried out in accordance with the procedure and strict procedure established by law. On the basis of the procedure established by law at all stages of the process, civil procedural relations arise, develop and cease.

The development of the oil refinery is directly related to the peculiarities of the socioeconomic environment, which is determined largely by the favorable conditions of activity of all branches of economy of the Republic of Kazakhstan, a stable regulatory processes of all normative -legal framework of implementation of market reforms and efficiency of making management and innovative solutions in the oil refining industry of the Republic of Kazakhstan. Currently, a lot of efforts are being made to scale modernization of all production processes, as well as modernization of equipment of the oil refining complex of the country

The article describes the the legal, socio-psychological and psychological aspects of child neglect. The author described the complex of problems that contribute to the deformation of the young generation.

In work characteristics of the mixing device of new type and principles of its work are given. The geometry of liquid, stream has been ivestigated arising in a tank when operating. Offers of rationalization character were brought.

The article describes the history of the slogan, linguistic means inherent to slogan in the Russian, English and German languages are studied, as well as general characteristics and differences in the choice of linguistic units when creating slogans are identified.

The article discusses the key characteristics of the concept - the basic unit of the ethnic picture of the world. In this paper, an analytical description of the «content» of multidimentional lingvomentional formation which is marked by the cultural specificity.

The article provides the analysis of the existing heatinsulating materials and the experience of using modern heatinsulating materials for a thermal protection of power boilers.

In this article described the social policy, given its characteristics, the analysis of social support of the state, and presents the main problems and the ways of improvement of the social support of socially vulnerable layers of the population.

Theoretical aspects of preschool children speech development by means of theatricalization are highlighted in the article which is understood by the authors as purposeful pedagogical activity providing effective learning of mother tongue vocabulary. A number of games classifications are analyzed that make up the theatrical activity. Emphasizing that the theatrical activities can be organized in different areas of work with children of preschool age the authors reveal issues of these areas.

In this article the author examines the characteristics of nomadic Eurasian states. The authors believe that any dynasty in nomadic state has a beginning and an end elevation. The beginning of the end of the dynasty, is the eighth generation descendants.

The article considers the methods of rationalizing the process of heating the refractory materials of aluminum electrolyzers up in relation to thermal stresses arising in the hearth lining. The functional goals of the refractory materials are listed. The operational characteristics of the refractory materials are presented. During thermal influence on a hearth lining, the physical effects called thermal expansion occur. The materials which save their properties under high temperature are known as refractory materials. The thermostability is described in more detail. The scientific test bench was used to investigate ultimate strength. The method of temperature and pressure measurement when conducting the experiments is cited. In order to choose the potlining it is necessary to know the peculiarities of refractory materials and actual industrial loadings as precisely as possible.

The results of the analysis of influence of some main process factors on heat conduction of heat-insulating materials are given in this article. As major factors were considered: density, temperature, humidity. Researchers are conducted on the basis of the theory of planning of experiment. The got dependences of heat conductivity on a closeness and temperature of material show approximately equal influence of these factors on the exit of experiment

In this article issues of efficient use of ferroalloys production waste to save costs are considered; energy efficiency of agglomerate production is calculated; sintering heat balance data are presented by a case study of Aksu Ferrolloy Plant. According to the annual economic benefits calculation the folowing results are obtained: due to аglogases recirculation, fuel saving is 1334.5 t.o.e.; due to reheating it is 1491 t.o.e.; due to installation of thyristor converters to the unit the annual energy saving is 1714000 kWh. Thus, it is identified that besides energy-efficiency measures during recycling of solid and gaseous wastes, the use of agglomerate increases IPF electric furnaces performance as well, decreases specific energy and reducing agent consumption which means the prime cost of finished products will be reduced.

One of the directions of energy saving is the application of heat pumps by means of which it is possible to use low-potential, usually waste heat. The question of the possibility of using heat pumps in thermal power plants is considered in the present article. Also a diagram of possible use in thermal power stations of low-grade waste heat with heat pump installation is presented in the article.

The article describes that the effective management of the learning process new textbooks using need to create a model of teacher action. The created model explicitly takes into account the objectives, methods, learning outcomes. With its help solve the problem of the knowledge of the student. And the problem of managing the cognitive activity is settled.

The method of integral transformations is used to study the process of bodies heating and cooling. As a result of theoretical calculations the regime of soil freezing depending on the ambient temperature was established. Laplace transformation is practically used to determing patterns temperature of constructed concrete dams, building grounds

The article has an attempt of figuring out content and character of evaluative notion changes of growing up generation in a new Kazakh society including nowadays difficulties and contradictions. All changes, taking place in our society, first of all economic, sociopolitical, psychical spheres, has influence on evaluative bearings of growing up generation. The authors of the study made a survey among the Kazakh youth, the purpose of which was to identify the value orientations of growing up generation of 14-17 years old.

The article deals with peculiarities of military lexis, types of weapons and using of them in Kazakh eposes such as “Er Kokshe”, “Er Kosay”. It gives a detailed analysis of edgy weapons such as nayza, kylysh, sungi, zulpukar, semser and weapons for shooting – sadak, that exist in lyrics. Aims of comprehensive interpretation of Batyr’s character sketch are defined. It is analyzed some scientists works, who explored military lexis in Kazakh epos. In this scientific article etymology, lexis and morphological structures of types of weapons in eposes “Er Kokshe”, “Er kosay” are analyzed. It is specially noted to archaisms such as nayza, kylysh, sungi, zulpukar, semser which are exist in heroically eposes.

The scientific article gives definitions of such terms as “public service advertising”, “discourse of public service advertising”. It also includes their descriptions, peculiarities and the sphere of their application. The article defines the goals and objectives of public service advertising, analyzes the classification of social advertising. The scientific article analyzes some scientific works of scholars who studied social advertising as communicative phenomenon, as well as the characteristics of social advertising that reflects society’s culture and its life.

In this article the process of socialization of the young generation is examined in the new system of market relations, taking into account his adaptation in a sociocultural environment. Development of social motivation based on the increasing of pursuance of receiving higher education taking into account new market tendencies in social and educational sphere has special relevance. Increasing of interest in the problems of students leads to accumulation of empiric and theoretical material about learning activity motivation, motivational preferences and system of values of the students, social status of the students of higher educational institutions, about attitude to higher education system and quality of teaching in higher educational institutions.

In this article, the author considers the formation of value orientations of students in higher education institution. According to the author, the values of students are formed under the influence of the social environment. Identifying the relationship between value orientations of students, their individual psychological characteristics, individual creativity, and active engagement in the surrounding world is shown through experimentation. In fact, in the article based on methods M. Rokich "Value orientation", S.S. Bubnov "Diagnostics of real structure of value orientations" and R. Cattell "16 factors, exploring personality characteristics of the" analyzing the content of the process of professional adaptation of students identified significant value orientations.The article presents there sultsof research.

This article discusses some of the practical application of cavitation technologies in autonomous heating systems, attached elementary economic calculation. The modern achievements and cavitation vortex heat generators, principle of operation and types of such equipment. Marked positive and negative aspects of installation and operation of heat generators. A comparative analysis of the economic calculation of seasonal operating costs of the vortex heater as auxiliary heating systems and district heating tariffs for Pavlodar.

The paper presents the thermal design of the building heating system of a four educational building № 1 Eurasian innovative university.Data are presented for the period from 1 December to 28 February for three seasons: 2013–2014, 2014–2015, 2015–2016 years. On the basis of the actual thermal design graphics and design of heat were built in the period from 1.12. at 28.02 for three seasons (2013-2014,2014-2015, 2015-2016 years). In these graphs clearly visible difference between the two values. According to calculation, the average difference was 13.02 % of the actual heat consumption.

Education is one of the priority directions in the development of our state. It is impossible to talk about modernization of education without monitoring its quality. The article considers a differentiated approach to learning, the conditions under which this approach can be applied. Two main criteria of the differentiated approach are singled out: level of training and learning ability. The article gives recommendations on the phased implementation of differentiation. Positive and negative parties of different types of control of education quality are also presented. Most objective is the differentiated test control. The article reveals its characteristics, the possibilities of using it in lessons in primary school.

The renewal of the paradigm of 12-year education is associated with the formation of key competencies in students that help to learn, understand and develop the world around. The developed set of tasks is designed to develop the need to transform educational material with the aim of improving the quality of education. This material is compiled in accordance with the age characteristics of primary school students, is aimed at organizing the processes of mastering new ways of acting, which will contribute to the formation of educational and cognitive activities. The issues discussed in the article will allow us to implement a competence approach in the education of students. The tasks presented in the article are intended to activate the educational motivation, the organization of independent cognitive activity, contribute to the systematization and objectification of the processes of monitoring and evaluation of educational activities.

This article mainly deals with the role of healthy lifestyle in strengthening pupils` health. The relevance of the issue of healthy lifestyle modeling arises out of the fact that heath is one of the most significant life values of a person and a guarantee of his or her welfare longevity. Currently, due to the low life expectancy of people, it is crucial to foster the meaning of health as the main value in one`s life and importance and necessity of health preservation from the early childhood. Life preservation requires dedicated and persistent efforts from every person. Herewith, it is necessary to understand one fact: life preservation is a personal prerogative. If one is to always be healthy one must remember that it requires persistent, dedicated and considerable efforts. Therefore, it is crucial to have a long course of personal conduct that designates the general culture of our labour and rest management, rational combination of physical and mental workload, sensible nutrition, active leisure and good quality sleep, and, moreover, skills of safe conduct in different dangerous emergencies. All of it composes the system of healthy lifestyle.

In the article, the questions of functioning of "self-knowledge" discipline in the school curriculum, setting goals and tasks in the process of educating the younger generation are considered. Based on the ideas of the spiritual and moral education of students.

The study of the dynamics of productivity of middle school students in the general education school during the school week was conducted. It has been revealed that when the class schedule is created, the norms of the organization of the school day are sometimes not observed, which is reflected in the dynamics of the mental working ability of students in the educational process.

The article is devoted to investigation of the structure of teachers’ professional competence. Taking into a ccount that competence is based on the relation of interdependent motivations, values, theoretical knowledge, practical skills, the integral characteristics, capacity for reflection, professional and personal qualities, was suggested to identify motivational-evaluative cognitive-practical and self-cognitive-practical and self-reflective components in the structure of the professional competence of teachers of biology

This paper presents a biotechnological approach of making a meat product in order to create a new domestic product. As the result of the study, prescription composition of the meat product with a cereal component was developed. Components comprise raw materials of domestic production, which allows to increase the level of nutritional balance of the product. The prescription composition includes secondary raw materials, and that allows manufacturers of processing industries to use non-waste production. This characteristic has been achieved due to the know-how. Secondary raw materials have nutritional value, but because of its features (coarse fibers) they are poorly digest by the body. The developed know-how ensures that these fibers are transformed into easily digestible form, giving the product special characteristics, which are described based on the results of nutritional value of the newly developed type of product. The developed new product allows to expand the range of meat products on the market.

The approach which was proposed earlier for composite materials strength prediction using contact angle measurements was applied for graphite laminated materials. It was shown that the calculation of the work of adhesion to polar and non-polar model liquids can be applied to the choice of polymer binder.

The article deals with religion, including Islam, which does not impose restrictions on obtaining knowledge. A learned person must keep up the pace of life in the contemporary world. Therefore, it is necessary to be able to manage the time given in youth correctly; try to get an education, to find a way to the mastery of a profession. The younger generation should strive to introduce modern technology.

The article presents an analysis of an Advertising World Model through a description of spatio-temporal and subject-object characteristics of the World Model, formed by Commercial Television Advertising. For the description of an Advertising World Model, the authors have conducted a content analysis of commercials broadcasted at “Pervyy kanal “Eurasia.” According to the authors, by impressing specific values, the advertisement thereby promotes a certain way of life. The authors consider advertising as a means of manipulating the mass consciousness. The paper presents an analysis of manipulation of needs; “spiritual” manipulation – generation of certain ideals and values; intellectual manipulation; feeling manipulation, etc.

In this article, the main directions and measures of the state support of monotowns in Kazakhstan aimed at providing their sustainable development are considered. The urgency of the topic is substantiated by the fact that there is intensification of negative socioeconomic tendencies in the majority of monotowns. Authors have specified concept of the monotown, their classification and typological characteristics are considered. Consider the statement by the Government of the Republic of Kazakhstan single-industry towns development program, its basic concepts and elements. Also consider tools monocities diversification of the economy, the use of them in order to create conditions for the achievement of a stable socio-economic situation.

This article discusses theoretical and practical bases of formation of sociocultural competence in the process of learning English. The structure and content of sociocultural competence are revealed, as well as the criteria for the selection of educational material for its formation in schoolchildren . The article proposes an analysis of the types of educational texts which form social-and-cultural competence among students, discusses the types of communication and their characteristics. The components of the verbal forms of social competence by using comparative analysis of the approaches of learning. Article defines the levels of interpersonal communication and their characteristics.

In this article the features of formation of youth policy in Kazakhstan in modern conditions are considered. Priority directions of realization of youth policy, as well as an interrelation of young generation with modern Kazakhstan society are studied.

The article deals with the problems of psychological and pedagogical support of students, the stages, the reasons for the first course in the period of their adaptation to college education. In the article there are specified the notions of psychological and pedagogical support, basic conditions of using support for successful adaptation of freshmen, there are also given methods on research of problems of students’ adaptation. The article deals with capabilities of taking into account individual psychological characteristics of freshmen in adaption to conditions of higher the college education institution. In the work there are also shown the characteristics of key concepts of freshmen adaptation for receiving professional education from the position of psychological, pedagogical and social support. Thus, the following notions are referred to the social position in freshmen support: obtaining a different status – a student status, relative freedom in choosing training trajectory, extension of communication and group interaction, a neutral position of teachers with respect to students, the educational environment and the comfort of psychological atmosphere for successful adaptation.

In the article psychological features of protective behavior of preschool children are considered. Also, the theoretical basis for studying protective behavior as an intensive use of behavioral protective means for children is presented, which is part of the normative development process and is conditioned by a complex of socio-psychological, individual psychological characteristics of the child.

In the article proposed by the reader, questions of forming communicative competences of primary school students are considered. The factors that influence the success of their formation are singled out. The results of studying communicative actions of younger schoolchildren are described. The theoretical basis for studying communicative universal actions among younger schoolchildren is also presented, which is a part of the development process and is conditioned by a complex of socio-psychological and individual psychological characteristics of the child.

The article examines the effectiveness of psychological support for children with visual impairment at the lessons of therapeutic physical culture. A study was conducted and demonstrated that the use of certain psychological techniques helps children with visual impairment to perform physical activities in a sparing mode. Taking into account individual characteristics, age, gender and the diagnosis of the child, the authors consider not only physical, but also psychological support on the physical therapy lessons. Which contribute to the effective implementation of the child in the process of educational and recreational activities.

Тhe article deals with the functioning of the personality as a social unit in certain spheres of communication, corresponding to its age characteristics, natural needs, generally accepted norms, rules and social stereotypes of behavior.

The article deals with the problems of the formation and development of a multilingual education, the mechanism for the training of multilingual specialists in the educational system of Kazakhstan. The multilingual education as an effective tool for training the younger generation for life in an interconnected and interdependent world is considered.

Changes in the education system have influenced the content of education in primary school. Working with younger students requires teachers to use modern methods. Determining the leading principles of teaching, the priority strategies of learning and the organization of an English lesson is what contributes to the 36 Вестник Инновационного Евразийского университета. 2018. № 1 ISSN 1729-536X effectiveness of teaching. The article is devoted to the analysis of the characteristics of teaching English in elementary school in the context of updated educational content. The authors reviewed the elements of the lesson, methods and techniques of organizing the educational process in primary school, described the factors affecting the effectiveness of training. The authors also tried to uncover a number of problems and give recommendations that arise in connection with the tendency to learn English in primary school.

In this article, the physical and biological characteristics of raw animal and plant material for protein-inoil emulsion and the technology of the meat molecular product «Pressed horse meat in the form» were considered.

The variants of the use of carbon as a heat-generating material in the agro-industrial complex are highlighted. This will significantly save energy, improve the environment, reduce the cost of operation, repair and maintenance of buildings and structures.

The technogenic impact on the ecological environment led to a decrease in the amount of natural food consumed and a change in its qualitative composition. The article discusses the innovative direction – enrichment of food with micronutrients. New types of bread with functional properties for mass nutrition are developed.

At present, the role of trade organizers in the conditions of a rapidly changing economic situation, global financial crises, and the rapid development of market relations is very important and significant. First of all, in the support of entrepreneurship, the development of trade relations, the promotion of local goods inside the country and abroad, the creation of conditions for the organization and development of trade in general. In this publication, the author analyzes the trade turnover of the Soviet and current periods, as a result of which the 30 Вестник Инновационного Евразийского университета. 2018. № 2 ISSN 1729-536X conclusion follows that, in addition to the state, other subjects of commodity circulation are also needed to create conditions for the development of trade. They were the organizers of trade. However, in the publication a significant place is given to the legal personality of special subjects of trade, the characteristics of the main types and functions of each of them, tasks and goals, as well as the problems of organizers of trade.

Evaluation of the output of lime is made for three options for the use of Ferroalloy gas: when you use the physical heat of the gas; when using the chemical energy of the gas and the location of the reactor after scrubbing; when sharing of sensible heat and chemical energy of the gas. As a result of the calculation of the expected yield of lime, it was found that the use of Ferroalloy gas for the production of lime can fully provide or at least compensate for the deficit of lime in the production of steel. The technology of calcination of limestone with Ferroalloy gas is presented in the form of a cycle synchronized with the smelting of steel, including, in accordance with the gas outlet from the layer and their alternation with pauses of inter-blowing periods. The preliminary technological characteristics of firing obtained as a result of theoretical analysis are used for further experimental and theoretical studies.

The article presents the characteristics of the main types of delicious-spicy plants and organoleptic properties of spices, which are of great importance in the modern world. The mechanisms of influence of tastyspicy plants on the body with therapeutic and preventive purposes, proven in the research work of foreign and domestic scientists, increase the effectiveness of their use in various fields of production, especially as food additives.

Psychological profile of College graduates is a set of interrelated personal characteristics that contribute to professional and personal development and allow to predict the degree of adaptation of graduates to the conditions of professional activity. The problem of professional demand for College graduates necessitates the training of specialists showing social maturity, the ability to adapt to the labor market, readiness for professional development. The influence of the psychological profile of a College graduate on the goals of teaching depends on various factors not only of the education system, but also of society as a whole. In this process, the main role belongs to the educational environment of the College. Therefore, one of the main conditions for the successful professional and personal development of the student during the years of study is the creation of a favorable psychological environment in the College for the realization of their intellectual and personal potential.

This article describes the history of Bauyrsak, their varieties and new types of national products, made on the basis of plant extracts, characteristic of the Kazakh and Turkic people, as well as the organoleptic properties of the product. The plant extract, which is added to baursaks, gives color, enriches with vitamins, increases the nutritional value of the product

The article is devoted to the actual problem of tooth loss and solving the problem through the development of tissue engineering. Tissue engineering is a set of methods and procedures aimed at the regeneration of biological tissues. It includes a triad of basic elements: stem cells, extracellular matrix or scaffold, growth factors and signaling pathways. An important role in solving the existing problems is associated with stem cells. Dental stem cells are capable of self-renewal and differentiation. Based on the analysis, it was found that each type of dental stem cells has its own characteristics and applications not only in dentistry, but also in other areas of medicine.

This article describes the main directions of socio-economic development of Pavlodar region, provides characteristics and dynamics of the main areas and sectors of the region, including the state of industrial production, agriculture, development of small and medium-sized businesses, the labor market, trade, electricity, heat and water supply, construction. The region is characterized by a progressive and diversified economic structure. In the structure of industry of Pavlodar region the largest share is occupied by the manufacturing industry. The priority direction of development of the regional economy in the context of ensuring its socio-economic development is the development of small and medium-sized businesses

In accordance with the law on education, the Republic of Kazakhstan guarantees the equality of the rights of all to receive a quality education, taking into account the intellectual development, psychophysiological and individual characteristics of each. The article is devoted to the analysis of the development of inclusive education, the problems on the path of introducing inclusive education are considered, the analysis of the experience of conducting an IT school in the framework of inclusive education is given. An attempt was made to identify factors contributing to the successful implementation of inclusive education methods.

The article considers the concept of «learned helplessness» in relation to people with disabilities. One of the obstacles to the spread and coverage of a large number of people by inclusion is the inertia of people with disabilities themselves. Psychological living of constant helplessness, a sense of their otherness leads to changes in personal characteristics and the formation of a depressive state. In turn, this state affects all activities and all relationships. The article studies the features of helplessness, its structure and contains recommendations for overcoming the learned helplessness

Different diagrams of thermal pumps operation at thermal power plants are considered in the article. Thus, installation diagrams are considered for thermal pump based on the use of low -grade heat of turbo-unit lubricating system oil and blow-down water of a steam generator.

Protection of the rights and legitimate interests of the individual is one of the main activities of the state. And the protection of human rights begins with respect for the rights of the child, who, because of his physical and mental immaturity, needs special care from the state and society. The transition of the Republic of Kazakhstan in the 1990s to a market economy, accompanied by a deep economic crisis, had a negative impact on the traditional spheres of social structure: work, family, education. As a result, at that time Kazakhstan and a number of other CIS countries turned into exporting countries of children, supplying them to foreign countries for adoption by foreign citizens. Numerous facts of adoption of children-citizens of the CIS countries by foreign citizens, which are essentially the sale of minors, often indicate a criminal and mercenary nature on the part of officials of guardianship and other state bodies.

This article discusses the idea of developing a functional product that exhibits biologically active, bifidogenic properties and a strong antioxidant effect. The authors propose the formulation of sea buckthorn marmalade with the addition of immobilized probiotics. The jelly-fruit marmalade formulation is used as a control sample; apple puree is replaced with sea buckthorn concentrate, sugar and molasses with fructose. In experimental samples, various methods of introducing probiotics are used and their viability in the finished product is further evaluated. According to the organoleptic characteristics, the samples have a pleasant taste, smell, original color, gelatinous consistency. The best viability was shown by microorgan isms immobilized by incorporation into the gel.

he article presents the results of research on the idea of «conceptosphere» in modern science. The main emphasis is placed on the semantic spheres represented by the meanings of words in the language. The authors conclude how much is the culture of a nation, its folklore, literature, science, fine art, historical experience, and religion is rich, so the concept sphere of the people is richer. In addition, the concept sphere of a person is a field of knowledge made up of concepts as its units. There are reflected the sources of the conceptual unit of ideas from which the world view of the language speaker is formed. The article analyzes the main trends of concepts that form the concept sphere, which enter into correlating relationships, hierarchies with other concepts by their individual characteristics.The specific nature of the system relations of concepts requires research, but the General principle of systematicity undoubtedly applies to the national conceptual sphere, as thinking itself presupposes the categorization of thought objects, and categorization presupposes the ordering of its objects.The article summarizes the conceptual system, which should be considered in terms of mental representations, mental lexicon, and the language of thought that are part of it. The term «cognitive space» also defines an individual cognitive space – a structured set of knowledge and ideas that has any lingual person, every speaker. In their work, the authors highlight the collective cognitive space, represented by a structured set of knowledge and ideas that must be possessed by all individuals belonging to a particul ar society. Attention is paid to the distinction between the concept sphere and the semantic space of the language. According to the authors’opinions, the concept sphere presupposes the existence of a mental sphere. The mental sphere consists of concepts that exist in the form of concepts, diagrams, gestalts, mental pictures, frames, scenarios. The semantic space of a language is that part of the concept sphere that is expressed by means of language signs. The semantic space of language is the subject of co gnitive linguistics research due to the fact that most of the conceptosphere of the human ethnos is represented within the semantic space of language.

The research explores the scientific approach to the concept and essence of the forensic characteristics of crimes, the concept’s formation history, and also draws attention to the role and place of this scientific category in the theory of modern forensic science. The article emphasizes that the forensic characteristic, which is an independent element of a private forensic methodology for investigating crimes, is one of the basic concepts of forensic theory and practice. The author notes that the phrase “forensic characteristics of crimes” should be understood as an ordinary data system on the elements of certain types of crimes and their mechanisms. Concerning specific crimes, it is necessary to consider the issue of the forensic information system for a specific offence, which is reduced to the subject of the investigation. The article emphasizes the importance of the category of “forensic characteristics of a crime” for countering novel criminal offences, among which the author highlights cybercrime. There is no doubt that this concept of the forensic characteristics of crimes is capable of investigating the main practical goals, including new elements of criminal offences, along with the solution of scientific tasks for the disclosure, investigation and prevention of crimes. As a result, the author concludes that it is precisely the concept of the forensic characteristics of crimes formulated in the article that, along with the solution of scientific tasks for the disclosure, investigation and prevention of crimes, is capable of Вестник Инновационного Евразийского университета. 2020. № 2 ISSN 1729-536X 67 implementing tasks related to the main practical goals of the investigation, including new elements of criminal offences.

This paper presents the results of the influence of ultrasonic treatment in the cofermentation of the cattle manure mixture (cattle) with the leaven from the rumen of ruminants on the process of biogas production. Anaerobic digestion was carried out in matinence periodic operation at the mesophilic temperature of 38 C ̊. As a substrate, a mixture with a content of 70 % cattle manure and 10 % leaven from rumen of ruminants was used. Treatment with ultrasound of the mixture was carried out at an intensity of 10 W/cm2 and an amount of input energy of 9350 kJ/kg of dry matter (DM), which completely eliminated the processes of stratification and sedimentation. Decomposition of organic matter (OM) in the periodic regime with the enzyme and ultrasound treatment occurred within 8 days, the usual substrate during this time OM decomposed 3.0 times less (only 14 %). The process of fermentation of methane in continuous and periodic modes treated with ultrasound, as at other temperatures, was stable, as can be judged by the values of volatile fatty acids (VFA) Volatile fatty acids (VFAs), alkalinity, pH, and biogas. The energetical efficiency of methane fermentation is estimated by comparing the volume of fuel (biogas) and heat consumption for technological needs. As shown by the comparison of efficiency of different regime, the largest amount of commercial energy in the form of biogas was obtained in the mode of joint fermentation of a mixture of cattle manure (cattle) with a ferment from the rumen of ruminants treated with ultrasound – 3 times more than without treatment (space).

Among many environmental conditions that affect a person, the most important factor is nutrition. Today, there is no doubt that there is a direct link between nutrition, health and disease. Proper nutrition ensures normal growth and development of a person, contributes to the prevention of diseases, has a positive impact on life expectancy and creates conditions for adaptation to the environment. A very actual topic for public catering in the Republic of Kazakhstan, namely for fast food companies, is the development of new recipes and culinary products from relatively inexpensive vegetable raw materials, as well as qualitatively new food products with a purposefully changed chemical composition. One of the main ways of solving problems of expanding the production of products for quick service, as well as products for dietary and therapeutic and preventive nutrition is the use of sprouted grains and beans. In this article, poly-grain mixtures of sprouted wheat and extruded soy beans in different ratios are studied and considered. Poly-grain mixtures developed by us are balanced in nutrients, vitamins and amino acids. The research was carried out on the basis of the accredited testing laboratory of RUBICOM enterprise LLP and the scientific laboratory of the Innovative Eurasian University. The purpose of this work is to study a promising method for increasing the nutritional value of grain mixtures by extruding them at different temperature conditions. To achieve this goal, the following tasks were planned: – to study the grain of soy beans and sprouted wheat on the organolepti c characteristics and chemical composition of the poly-grain mixture; – examine the chemical composition of the poly-grain mixture before extrusion; – choose the optimal mode of the extrusion process; – study and analyze the chemical composition of poly-grain extruded mixture; It should be noted that we have developed for the first time the optimal technological mode of extrusion of poly-grain mixture from sprouted wheat and soy beans, and the physical and chemical composition of the poly-grain mixture was studied. The results of the research presented in this paper are the basis for the development of recipes and technologies for fast food products. The reliability and validity of scientific statements is confirmed by the choice of modern methods of chemical composition analysis.

The article is devoted to the current problem of differential diagnosis of diseases of viral etiology in farm animals. Viral diseases are currently widespread, occupy a leading role in the infectious pathology of farm animals, causing enormous economic damage. Given the magnitude of animal vaccine prophylaxis, in order to increase the effectiveness of antiepizootic measures, the urgent issue i s the development of methods for the rapid and effective detection and differentiation of field and vaccine strains of the infectious rhinotracheitis virus in cattle. The possibility of using a polymerase chain reaction to identify and differentiate a vacc ine strain from epizootic strains and isolators of the cattle infectious rhinotracheitis virus is considered. In the process of research, a PCR-RFLP analysis method was developed to detect the IRT virus in the test material. The PCRRFLP analysis method was used to identify and differentiate the vaccine strain TK-A form epizootic strains and isolators of the cattle IRT virus. The principle of PCR, based on repeated repetition of DNA cycles, annealing and synthesis, which leads to an increase in the number of specific DNA fragments of the pathogen, allows you to take into account the results of PCR in an agarose gel. Analysis time is about 30 hours. The sensitivity of detecting viral DNA is 1-10 picograms (102 TCD). Due to characteristics such as relative simplicity and reaction rate, high sensitivity, specificity and reproducibility, PCR has recently become widespread in basic and applied research in various fields of biological science, including veterinary virology. The results obtained during the studies show that the use of PCR-RFLP allows to differentiate field and vaccine strains and isolates of the IRT virus with a high degree of reliability. The use of PCR -RFLP analysis increases the efficiency and informativeness of studies in the molecular epizootol ogy of cattle RTI, as it allows not only to identify the DNA of different virus strains regardless of their nature, but also to differentiate between them, including differentiating the strain TK-A used for the production of attenuated vaccines against epizootic strains and isolates of the virus.

The article is devoted to the mathematical modulation of a complex of experimental data obtained in the process of experimental studies of processed cheese products, processed by mathematical methods. The purpose of this study is to establish the type and amount of the melting salt that promotes the formation of the plastic structure of the processed cheese product. The analysis of scientific research in the field of food technologies showed that mathematical modeling is used in the following areas: clarification of the modes of technological processes, design of recipes and assessment of the quality of finished products, as well as forecasting the shelf life of new products when they are put into production. The most relevant in describing the processes of food production are models of multivariate variance-regression analysis using methods of mathematical planning of the experiment. The authors carried out mathematical modeling and established graphical dependencies characterizing the degree of influence of the regulated factors X1 and X2 on the controlled ones that determine the quality and safety of processed cheese products. It is important that the mathematical analysis of the graphical dependences of the rheological parameters on the adjustable factors indicates the reliability of the data obtained. It is concluded that an increase in the melting salt dose leads to an increase in the – limit shear stress, which reflects the nature and state of the consistency of the processed cheese product. The process of normalization of the controlled factors by the maximum value was carried out. Graphical dependencies were built and regression analysis was performed, the results of which allow an objective assessment of the degree of influence of the type and dose of the melting salt on the chemical and organoleptic characteristics of the test products. The authors have proven that the optimal efficiency of transforming the structure of the constituent components of the recipe into a plastic structure of a processed cheese product that is stable during storage is provided by a combination of adjustable factors X1 (Solva 85) and X2 (Solva 120) taken in a ratio of 1: 1, with a total amount of 1,2 mas.%. At the same time, the quality indicators of the experimental products are characterized by the following values of the controlled factors: У1 – 1280 Pa; У2 – 9 points, У3 – 9,301 (2,0-2,2109 colony forming units /g).

Environmental protection measures are based, among other things, on the rationalization of the organization of the production waste management process. Population growth and the race to industrialize pose a serious threat to the ecosystem. Currently, the average global waste generation per capita is 494 kg / year. A large number of industrial enterprises operate on the territory of Kazakhstan. The range of manufactured products is very wide: household items, transport, building materials, equipment and much more. Each type of production is inevitably a source of a large amount of industrial waste, annually at the enterprises of Kazakhstan up to 600 million tons of waste are generated, three percent of which are recycled. On the territory of Pavlodar region there are enterprises in the field of metallurgy, mechanical engineering, chemical industry, construction industry enterprises, light industry, about a hundred in total. In this connection, the problem of treatment and disposal of industrial waste in Pavlodar region is very relevant. The article discusses the system of waste management in order to reduce their impact on the environment, activities for the disposal, transportation, disposal of waste, as well as their disposal at the industrial waste landfill in Pavlodar. The landfill in question is intended for the reception, temporary storage and disposal of non-hazardous solid industrial waste of the «green» level: waste and scrap of chromium, cadmium, aluminum, copper, lead, zinc, manganese, plastic waste, polyethylene, abrasive, rubber waste, ash and ash and slag waste; and also «amber»: waste containing mercury, arsenic, lead, waste batteries, phosphoric slags, waste oils, oil sludge. The scheme of organizing waste storage works is considered. The volume of accepted and recycled waste, as well as those placed at the landfill and used for their own needs, was analyzed, including construction waste, waste sleepers, ash and slag and abrasive scrap. The solution to the problem of industrial waste disposal is associated with the need for innovation and the introduction of new technologies and equipment.

The pandemic has given a new impetus to the digitalization of society. Digitalization is one of the most significant trends in our real life, which is actively implemented in the field of education and is rapidly gaining ground in Kyrgyzstan. This article examines the positive and negative aspects of the modern educational environment focused on the systematic use of digital learning technologies. Modern technologies are developing at a great speed. The authors are sure that the process of transition of modern education and in particular the school curriculum to an electronic format is inevitable. This determines the relevance of the topic under consideration. The author determined that when the idea of digitalization comes to life, not only the education system will change, but also its meaning and purpose. A new one has already grown digital generation; new digital technologies have emerged, digital technology has been born economy, educational technologies have changed – digitalization has begun education. How not to confuse digitization and digitalization? What legislation what is the basis for digitalization of education supported by? What are the pros and cons of the digitalization of education? The prospects, pros and cons of digitalization of education are presented in this article. The article discusses the main advantages and disadvantages of digital education. It is concluded that the digitalization of education is a necessary and inevitable step that characterizes the modern social reality, so it is necessary to carefully study all the pros and cons in order to avoid serious problems in the future. Digitalization implies independent study of the material. It will be possible to evaluate all the pros and cons of such a system and its consequences decades later. When the time comes, the entire structure of education will change.

Main problem: The article examines the issues concerning teaching reading skills to the middle school students according to the updated program. Purpose: The article analyses the course book “Excel” for 7 th grade students on teaching reading skills. Methods: The criteria of analyzing the course book contain the forms of text presentation, types and situations modeled by the text, compliance with the level of English proficiency, age of students, information content, and accessibility. It also includes assessment ofcourse book texts for the development of reading for general understanding of information (skimming), for identifying details (scanning) and reading with full comprehension, as well as for the different types of tasks for reading. Results and their significance: The texts in the course book correspond to the age characteristics of adolescents, the level of English language proficiency (A2) and are developed according to the standard curriculum.The most popular forms of text presentation are popular science texts and information about public events. The situations in the texts are dominated by educational, most of all the mixed type of text prevailed. There is a balance for the types of tasks developing reading for general understanding and reading for identifying details which leads to the development of functional reading literacy. The types of reading tasks used are quite diverse and contribute the development of communicative skills (pair work, group work, etc.). The misbalance of tasks on developing low order and high order thinking skills can be solved through adding some tasks developing HOTS.

In this article, the author examines the features of the pre-trial stage of the investigation in the investigation of kidnapping. The initial stage of the investigation consists of: starting a pre-trial investigation, conducting urgent investigative and procedural actions and attracting a person as a suspect. The initial stage of the investigation of a crime, including kidnapping, is crucial for the implementation of further qualitative and offensive investigation of criminal acts. The purpose of this article is to study the natureand features of the beginning of the pre-trial investigation of kidnapping. In the course of the study, the author used such methods of scientific research as: dialectical, system, method of qualitative and quantitative analysis, generalization and study of literary sources, comparative legal, historical-legal, system-structural and formal-logical methods, as well as the method of system analysis. Activities to identify signs of a crime must be considered through the prism of the beginning of a pretrial investigation. Currently, the beginning of a pre-trial investigation, from the point of view of criminology, refers to very specific types of organizational activities at the initial stage of the investigation of a kidnapping. The detection and investigation of kidnappings is highly complex, requiring law enforcement officials to maintain strict secrecy. If there is a reason provided for by the criminal procedure law to start a pre-trial investigation, the investigator or an employee of the body of inquiry is obliged to establish the presence of sufficient data indicating signs of kidnapping. To do this, it is necessary to carefully study the content of the application, compare the available factual data. The beginning of a pre-trial investigation should not be an end in itself of the activities of the pre-trial investigation bodies. At the same time, their offensive and proactive work on all received facts, information and operational materials is extremely important, because it is the embodiment of the active position of the law enforcement system inthe direction of preventing and suppressing possible illegal encroachments on personal freedom, including the suppression of those criminal actions that are in the stages of their preparation or beginning.

Main problem: The literature on regional entrepreneurship tends to neglect interregional human capital flows, and yet spatial mobility provides emerging entrepreneurs with knowledge and networks in different locations to exploit entrepreneurial opportunities. Purpose: The purpose of this study was to establish the relationship between mobility and entrepreneurship. Methods: Examined how multidisciplinary experience and non-local knowledge provide migrants with the desire for opportunity-based entrepreneurship. The connection between the regional environment and entrepreneurial motives based on opportunities for people with and without spatial mobility is shown. The analysis of data from a survey of labor force dynamics is presented, which compares the characteristics and driving forces of entrepreneurial motives of migrants and local residents. A survey has been conducted that indicates a higher prevalence of opportunity-based entrepreneurship among migrant entrepreneurs compared to their local counterparts. Official Kazakh statistics do not take into account the impact of internal migrants on the development of the economy and welfare of the region to which they moved. Results and their relevance: Based on the analysis and survey, it was found that the experience of spatial mobility significantly increases the likelihood of entering an opportunity-based business. The regional environment influences the entrepreneurial motives of migrants and non-migrants, but in different ways. Local entrepreneurs are more affected by the endogenous nature of the firm, while migrant entrepreneurs start businesses based on both local needs and external linkages with wider market areas. The regional environment influences the entrepreneurial motives of migrants and non-migrants, but the experience of spatial mobility significantly increases the likelihood of starting a business based on the opportunities of migrants.

Basic problem: the Republic of Kazakhstan is a platform for implementing innovative projects in all spheres of the economy, providing the younger generation with resource centers, technological parks, agricultural equipment, industrial technologies and scientific and educational complexes. The main goal of such actions is to activate scientific research, increase the technological potential of the industrial sectors of the national economy, and stimulate the development of innovative activities in the field of research and development. The problems of developing an entrepreneurial culture are a cornerstone issue that combines a combination of motivational principles for generating and promoting ideas, activating youth entrepreneurship as the flagship of the future economy, and a complex epidemiological situation in the world that hinders not only the development of entrepreneurship, but also the course of all socio-economic processes in society. Purpose: The purpose of this study is to identify the problems of youth entrepreneurship and find ways to solve them in accordance with the principles and methods of implementation, including the unit economics. Methods: the research Area focuses on economic modeling techniques that are successfully used in international practice to determine the profitability of business models, taking into account the effect of the production of a unit of goods / services or a single client / customer. The implementation of this approach is facilitated by the use of traditional methods of scientific research, such as analysis, comparison, and a graphical method for visualizing the results obtained; quantification method and parametric method as an evaluation tool that allows formalizing the procedure for evaluating the performance of unit economics models. Results and their significance: when considering business models in relation to youth entrepreneurship, attention is paid to the skills and competencies that students who study the disciplines of the entrepreneurial block in higher education receive. The proposed methods of unit economics are actively used in the development and promotion of startups, as an integral part of business plans. It is concluded that youth business has started to play a crucial role in solving socio-economic problems, such as creating new jobs and reducing the unemployment rate, and training qualified personnel. The set of proposed measures provides additional opportunities and increases the influence of youth entrepreneurship, which becomes the basis for unlocking its potential.

The article discusses methods for creating smart things, using the example of the use of innovative technologies in the field of materials for clothing and footwear. The factors of form formation are substantiated by the example of the preferences of an individual customer who forms its image through accessories and shoes. The author considers the factors of shaping, based on the special functional features of shoes in connection with ergonomic factors. The designer is able to foresee the factor of transformability in modern footwear, changes in functional qualities, appearance, and design features of new footwear. As a result, on the basis of these transformations, to get a new emotional image and a new form. The shape of the shoe becomes a factor for transformations at the request of the customer. The article discusses the functional tasks of this shoe, plastic characteristics, technical and design tasks. As research methods, the article proposes variants of experimental models with possible stages of transformation, presents preliminary technical data, conducts a comparative analysis with innovative footwear samples of famous world designers, and makes assumptions about the development of this model in the future. An experimental method was used during the study. A shoe shape was developed, which took into account the preferences of the age group of 12-16 years old, relying on this category of consumers, we were able to go beyond the rational understanding of shoes as a functional form and gave it the meaning of a fantastic image, which allowed us to consider the form in the semantic and artistic context dictated by this age group of consumers. In addition, investing in this model the concept of "smart shoes", we considered not only the ability of modification and transformation by rearranging replaceable parts, the possibility of designing and reincarnating from one form to another, combining the constituent elements of the shoe into one whole, but also the development of the creative potential of the consumer, who at its own discretion can rebuild the structure and, in fact, as a designer itself, form a new model. The article makes assumptions about its further development in various fields of activity. For example, medicine, sports, art, etc. Considering the introduction of new materials, we relied on discoveries in the field of nanotechnology and considered among the possible features of this model the change in color on the basis, the reaction of materials to light, temperature, etc. The project is aimed at creating such shoes that will be developed for a wide range of consumers thanks to the wide range of possibilities contained in the design of the form and the features of modern materials.

In the last decades of the twentieth century, in the national economy of many countries, organochlorine pesticides were most widely used, characterized by stability in the external environment, the ability to cumulate in various tissues of organisms. Lindane (the gamma isomer of hexachlorocyclohexane) is listed as a restricted persistent organic pollutant and is an ecotoxic substance with severe and chronic effects on the human body. The study of the effect of lindane on carbohydrate metabolism at the present stage is still insufficient. This fact led to the study of the effect of γ-HCH on the insulinogenic function of the pancreas in in vivo and in vitro experiments. In experiments in vivo, the animals of the experimental groups were once orally administered γ-HCH at a dose equal to 1/5 DL50. Isolated pancreatic islets, precipitated in vitro and fixed on mica plates, were exposed to γ-HCH in amounts equivalent to 1/5 to 1/4 DL50. Paraffin sections of pancreatic tissue from experimental and control animals were stained with aldehyde fuchsin according to Gomori, and tissue preparations were also examined by a highly specific method for detecting insulin in β-cells using diethylpseudoisocyanin staining, followed by examination of the preparations in the ultraviolet light of a luminescent microscope.The same methods were used to study preparations of isolated pancreatic islet tissue on the 4th day of cultivation. The influence of orally administered γ-HCH on the level of immunoreactive insulin in the blood of experimental animals was also studied. The insulin level was determined by the enzymatic-immunological method. The concentration of IRI was established before the start of the experiment and 4-4.5 hours after acute inoculation. Results and their significance. In the study of stained preparations of the pancreas of experimental animals, numerous islets of ordinary sizes were revealed, the cytoplasm of which was filled with aldehyde-fuccin granularity in quantities indistinguishable from those observed by microscopy of preparations of control animals. The value of the fluorescence coefficient in the histofluorimetric study of the control and experimental preparations did not differ significantly. However, the content of IRI in the blood serum showed a distinct decrease in the first hours after priming. In experiments in vitro, when studying the effect of γ-HCH on cultured tissue, introduced into the nutrient medium on the second day, in the field of view of the microscope, single, small pancreatic islets were revealed. Their number on a constant area of the plates was significantly lower than the value of the same indicator in the study of control preparations. Thus it has been shown that γ-HCH does not affect the histostructure of the endocrine pancreas, but causes a significant decrease in IRI in the blood serum, as well as a change in the histochemical characteristics of cultured β-cells.

The main task of microbiological study of pulmonary patients is to identify the etiology of acute and exacerbation of chronic disease in order to determine therapy and control its effectiveness. Classical methods of microbiological research consist in isolating a pure culture of the causative agent of the disease with its identification by biochemical, antigenic and other characteristics. Such studies are multistage; they impose rather strict requirements on the quality of the source material, the timing and conditions of its transportation, laboratory equipment and the precise execution of the research methodology for at least 3-5 days. Isolation of the culture of a number of pathogens (atypical intracellular microflora, anaerobic bacteria, mycobacterium tuberculosis) requires even more lengthy studies using special media and equipment. This article presents the results of a bacteriological study of pathogenic microflora in diseases of the respiratory system of the population of the Shcherbakty district of Pavlodar region for 2017-2019, including the following sequence: microscopy of native and Gram stained smears; inoculation of biological material on nutrient media for isolation and identification of the pathogen; determination of the sensitivity of the isolated microorganism to antibiotics; immunological (serological) research methods aimed at determining antigens of microbiological origin, as well as antibodies to them in the patient's body. It has been shown that conducting bacteriological studies in accordance with the requirements of regulatory documents allows obtaining reliable and comparable results necessary both for the optimal treatment of patients and for collecting and analyzing data on monitoring the emergence and spread of diseases of the respiratory system caused by pathogenic microflora.

The article reveals the dynamics of grain production in the Republic of Kazakhstan, grain exports by countries. The author analyzes the grain market (sown area, yield, gross harvest). Kazakhstan has a significant potential for grain exports. Grain exports are important for the country's economy. The country is one of the six largest grain exporters in the world. This is due to the high milling properties of Kazakh grain, the quality indicators of Kazakh flour are highly valued in many countries of the world, which allows Kazakh wheat to be competitive in the world market and provide markets in various countries of the world. The main export destinations are Uzbekistan, Afghanistan and Tajikistan. The article analyzes the main trends in the development of the grain market and gives an assessment of the state.

Main problem: It is well known that the development of language in society, the development of speech, the formation of personality largely depends on the interaction of people. Therefore, they develop depending on the specifics of each nation and are one of the values that people have accumulated over the centuries. Comparison of human behavior with nature in English and Kazakh languages describes the spiritual life of each nation. It defines the national feelings, national behavior, national customs and traditions. Purpose: Comparative analysis of the values of the Kazakh and English peoples occupies a special place in the culture and language, the essence and content of which are indelible. This is a fount of cultural and historical life of the people, the spiritual value of the nation, such qualities as prudence and kindness. Methods: This article describes the ethnolinguistic foundations for comparing human character and nature in English and Kazakh. In cultural linguistics and cognitive linguistics, the concept of behavior is studied as an image of the world formed in the consciousness of an ethnic group. Based on the definition of the concept of behavior, the authors describe the manifestations of behavior in the national consciousness, the system of national thinking, beliefs, attitudes. It is noted that the formation of the behavior of unrelated Kazakhs and Englishmen depends on their geographic environment, nomadic lifestyle and behavior. Results and their significance: The phraseological units of the two languages used in this study clearly to show the characteristics of each nation. It is shown that forecasting natural phenomena for both peoples is closely related to their life, economy, occupation and plays an important role in people's lives.

The preservation and enhancement of national values – this is the main goal of the work on the implementation of the program"Rukhanizhangyru". Program "Rukhanizhangyru" is a new stage in thehistorical development of modern Kazakhstan. Modernization of the public consciousness of each individual involves the revision of young people's attitude to themselves in order to achieve success in professional activities and consolidate their competitiveness. At the same time, it is important to preserve all the positive experience that has accumulated over the centuries, the characteristics of the people and the country, and education plays a system-forming role in this process. Today, in Kazakhstan and Russia, there is an acute issue of promoting values in the student environment, developing a sense of belonging to the present and past of the Motherland, responsibility for its future, but the potential of the educational space in the implementation of this process is not fully revealed. In the conditions of the changed educational space of these States, the process of forming a new generation of socially active, responsible for the development and preservation of spiritual values of young citizens who have all the values put forward by the States is relevant. The Purpose of this article is to study, analyze and generalize domestic and foreign experiences in the issues of introducing students to the system of national values, revealing the potential of the educational environment in promoting values in the youth environment and strengthening its competitiveness. Methods: methods such as analysis, generalization,and comparison are used, they allowed to reveal the depth and relevance of the problem within the educational space. Results and their significance: domestic and foreign experience in introducing students to the system of national values is Studied and generalized. Educational resources are considered as a guarantee of formation of values of youth, self-determination of each citizen in the conditions of modernization of consciousness.

Main problem: Microbial-plant relationships, including epiphytic microflora, are the subject of attention of many scientists. Numerous works confirm the high interest of researchers and the relevance of studying this topic. Despite many years of research, some questions concerning the characteristics of the epiphytic microflora still remain open. It is already a well-known fact that the epiphytic microflora is directly related to the physiological development of the plant, including yield. This is due to the close interaction of the plant with the microorganisms living on its surface throughout the entire growing season. It is also proved that epiphytic microflora has the ability to change characteristics under the influence of environmental factors (temperature, humidity, soil contamination, sunlight, etc.). In this regard, the study of this topic is one of the important areas of biological and agricultural sciences and is of high importance. It should be noted that a significant role in the development of agriculture in the Republic of Kazakhstan and the Pavlodar region is played by representatives of vegetable crops, including tomatoes and potatoes belonging to the Solanaceae family, which indicates the high importance of the plants selected for the study. The combination of the above arguments determines the need to study the epiphytic microflora of plants and establish the regularities of its influence on the adaptive properties of the studied plants of the Solanaceae family, as well as on their productivity. In turn, the study of epiphytic microflora can also contribute to the search for new ways to increase the yield of plants and their resistance to various diseases. Purpose: The article is devoted to the study of the properties and characteristics of the epiphytic microflora of the surface of various organs of plants of the Solanaceae family (on the example of tomato and potato). The variability of the composition and number of epiphytic microorganisms in seasonal dynamics is shown. Methods: bacterioscopic method, fingerprint method, flushing method, Gram staining method. Results and their significance: The characteristics and properties of representatives of epiphytic microorganisms of aboveground (leaf, fruit, flower) and underground (potato fruit) plant organs were studied. The role of the influence of environmental factors on the variability of epiphytic microflora is determined on the example of plants Lycopersicon esculentum Mill. (common tomato) and Solanum tuberosum L. (tuberous nightshade). The differences in the microflora of different plant organs in different periods of vegetation are shown.

Main problem: Computer systems and technologies are changing our society significantly. These changes are interconnected with both social and production spheres. Innovative digital technologies have a huge impact on the labor market and professional activity, contributing to their transfer to the electronic environment. Using digital technologies, modern people set new goals and solve problems with an increasing speed of problem solving, capitalizing on the possibilities of collaborative distributed actions within networks. In this regard, new competencies of specialists are in demand. Purpose: The purpose of this study was to establish the impact of the fourth industrial revolution on the education system and the development of skills and thinking for learning. Methods: When conducting scientific research, economic and statistical methods were used. These methods were also used in comparative analysis, as well as in assessing data and indicators of the higher education system, taking into account the impact of the fourth industrial revolution. The analytical method was used to consider the characteristics and factors influencing the development of skills and thinking for learning in modern conditions. The abstract-logical method is used to identify problems affecting the development of the labor market under the influence of digital technologies. Results and their value: The result of the study is that conclusions are drawn about the upcoming changes. Automation and digitalization are likely to lead to significant unemployment in most countries, so adaptation innovation policies are needed to help offset unemployment due to digitalization. Governments need to invest heavily in higher education as an economic development tool for their citizens. Lifelong learning should be identified as a critical element of success in the era of the fourth industrial revolution. Curricula should develop digital skills and address workforce disruptions due to automation.

This scientific and practical article is devoted to the analysis of the results of an experiment aimed at psychological and pedagogical support of the process of building a project for the development of the inner world of a player of a children's and youth football team of the professional football club "Lviv" from the Ukrainian city of Lviv. A special feature of the psychological and pedagogical support for designing the development of the student's psyche is the use of the paradigm of the language of the theory of activity in the version of the Moscow methodological and pedagogical circle (MMPC), using the language of schematic images and the pyramid of subjectivity, explaining the path of formation of human mental mechanisms in the unity of cognitive, emotive and conative processes, starting from the vital level of their development to the level of spirituality. Another feature of the article is that the presentation of methods and techniques does not occur in a separate part of it, but in the process of describing the steps of designing a development plan that is formed for absolutely all professional athletes who have the acmeological potential of professionalization in football. It is presented in the form of 11 steps to create an individual trajectory of the player's development. In each of these steps, it is important that the coaches and the player participate with their parents, representatives of the club, which has its own component in terms of the volume and quality of the efforts required on their part. The article reveals the first of the 4 steps of creating a reasonable player development plan. For example, we consider working with one of the players. The content of this particular illustration is a very illustrative and demonstrative example. It is assumed that a series of articles in this publication will reveal the topic of student development management, which will include both scientific and theoretical and review types of works. The next article will be a continuation of this one in terms of demonstrating the success of implementing this particular development plan by the example of several players from a team consisting of 22 players who have been trained in a similar way, i.e. using methodological criteria for the organization of psychological and pedagogical support for the development of thinking, sensory-motivational and volitional characteristics of players by football club coaches.

The main problem: This article is devoted to the key problems of the fuel and energy complex of the Republic of Kazakhstan: 1) lack of production capacity to meet the growing demand for energy and fuel from the economy and the population. Increased demand for electricity and heat, which will require the commissioning of new generating capacities.There is already a shortage in the fuel markets. Modernization and bringing the existing oil refineries (hereinafter referred to as refineries) to full capacity will not allow providing the domestic market until 2030; 2) the export orientation of raw materials, the dependence of the economy on the export of energy resources. In order to attract technology and investment in the oil and gas and nuclear industries, agreements on the extraction of energy resources were concluded with international export companies. In the medium term, Kazakhstan may face a shortage of oil for domestic refineries, if measures are not taken to stimulate its refining within the country. The uranium mined is fully exported; 3) high energy intensity of the economy, low level of energy efficiency. There is a high potential for increasing the efficiency of energy use both in the electric power industry and fuel production, and at the level of final consumption – in industry and housing and communal services; 4) decrease in the replenishment and quality of the resource base in the oil and gas, coal and nuclear industries; 5) low environmental friendliness of technologies used in the fuel and energy complex. Purpose: The purpose of the article is to reveal the problem in the field of ensuring the fulfillment of international obligations between different countries and their own energy sufficiency by gradually changing the structure of energy production. Methods: Studying the experience of increasing the efficiency of the use of energy resources and energy saving as a priority of the state policy of the country. Analysis of production capacity with a constantly forecasted shortage of primary energy resources and insufficient growth of capacity for the production of electricity and heat. Consideration of the possibility of compensating for the shortage by saving energy resources, increasing tariffs for energy carriers, as a stimulating factor for their effective use. Results and their significance: The results of this article will reflect the problems of energy, as the most important driving force of global economic progress. The well-being of the people depends on the state of the country's energy sector, therefore there is an urgent need to solve the emerging problems. The global energy problem is, first of all, the issue of stable and efficient supply of fuel and energy to mankind. Today, the energy sector of Kazakhstan is focused on fuel resources, since the country is provided with hydrocarbons and other energy resources. About 72 % of electricity in Kazakhstan is generated from coal, 12,3 % from hydro resources, 10,6 % from gas and 4,9 % from oil. Thus, the four main types of power plants generate 99,8 % of electricity, while alternative sources account for less than 0,2 %.

The main problem: The rheological properties of calcium salts are of theoretical and practical interest for a modern researcher. The theoretical interest is primarily related to the search for general patterns and manifestations of the rheological properties of solutions of calcium salts. The practical component is based on the search for patterns and dependencies of the properties of solutions on the structure and composition of the object of study. Such chemicals as calcium salts are of particular practical interest, they are widely used in various fields, such as the food, chemical and pharmacological industries. Hydrophilic high-molecular solutions of alginates, namely calcium alginate, are actively used in the preparation of soft dosage forms, the manufacture of jelly masses in confectionery, act as thickeners in the food industry. They are characterized by a fairly high percentage of viscosity at low concentrations, bioavailability, prolonging effect, absence of irritating properties, biocompatibility with many polymers, which is especially important in the pharmaceutical industry and medicine. The use of calcium salts for these purposes is currently very promising, since these organic salts have a number of unique properties associated with gelation. Purpose: This paper contains the results of studying the features of the rheology of calcium alginate solutions. A concentration range of 0.1-0.7 % was chosen for the studies, which is sufficient to avoid gelation at room temperature. The dependence of viscosity on concentration, temperature (in the range of 25-45 °C) and shear rate were studied. Methods: Analysis of theoretical sources, observation, comparison of results. The rheological characteristics of the obtained substances were studied using a capillary viscometer. The measurements were carried out in the temperature range of 25-45°C. Results and their significance: it was found that there is a significant dependence of viscosity on concentration and temperature. For concentrations of 0.3 – 0.7 %, a similar type of dependence is observed, in contrast to solutions with a concentration of 0.1 % . Explanations of these dependencies were proposed.

Singularly perturbed partial differential equations with small parameters with higher derivatives deserve special attention, which often arise in a variety of applied problems and are used in describing mathematical models of diffusion processes, absorption taking into account small diffusion, filtration of liquids in porous media, chemical kinetics, chromatography, heat and mass transfer, hydrodynamics and many other fields. It is necessary to consider the creation of an asymptotic classification of solutions of singularly perturbed equations using a well-known approach to solving the boundary value problem. In this case, the singular problem is understood as the problem of constructing the asymptotics of the solution of the Cauchy problem for a system of ordinary differential equations with a small parameter with a large derivative. The asymptotics of the solution in all cases is based on the last time interval or the construction of a boundary value problem for a system with a weak clot in an asymptotically large time interval. Purpose - to construct and substantiate the asymptotics of solving a singular initial problem for a system of two nonlinear ordinary differential equations with a small parameter; To date, a number of methods have been developed for constructing asymptotic expansions of solutions to various problems. This is the method of boundary functions developed in the works of A.B. Vasilyeva, M.I. Vishik, L.A. Lusternik, V.F. Butuzov; the regularization method of S. A. Lomov, methods of averaging, VKB, splicing of asymptotic decompositions of A.M. Ilyin and others. All the above methods allow us to obtain asymptotic expansions of solutions for wide classes of equations. At the same time, such singularly perturbed problems often arise, to which ready-made methods are not applicable or do not allow to obtain an effective result. Therefore, the development of methods for solving equations remains a very urgent problem. As a result of the study, an algorithm for constructing an asymptotic classification of the initial solution of the problem with a singular perturbation is given, and approaches to estimating the residual term are also shown.

The article compares modern and traditional pedagogical methods used in the process of teaching a foreign language in primary school, differentiates both the advantages and disadvantages of each of them, and indicates ways to supplement the shortcomings of traditional methods with new methods. Currently, the main methods used in teaching a foreign language are being considered. Among the new innovative methods that have recently appeared in the sphere of teaching foreign languages there are community language learning / counseling learning, the sugestopedic method, total physical response, the method of language teaching using information and communication technologies, consciousness-raising approach, task based learning, neuro- linguistic programming, guided discovery, the test-teach-test method. Their influence on the development of language competencies and creative abilities of primary school students are considered. The authors note that the main and most important condition of modern methodology in the process of teaching foreign languages is the creation of an artificial foreign language environment, i.e. the creation of a natural linguistic environment. The authors comment on the concept of "electronic linguistic environment" based on recent research. They show that "digital" children are completely immersed in the computer world, i.e. they live in an electronic linguistic environment and this allows them to solve the tasks of teaching a foreign language. The purpose of the article is to analyze traditional and modern educational methods used in modern English lessons. Activation of the student as the main figure of the educational process, the ability to work in close contact with other students, giving the student the opportunity to work independently, depending on their physiological, intellectual, psychological characteristics, is carried out using individual, paired, group, classroom and other forms of work. Both traditional methods and the latest modern methods are listed among the named teaching methods. Each method has its own characteristics. Therefore, it is very important to consider them in a comparative plan. Each old and new method has its advantages and disadvantages. Therefore, the methodology of teaching English always requires additions and improvements. They are of great importance for expanding the horizons of students, increasing cognitive activity, improving knowledge, skills and language competencies. The authors used the following methods: the descriptive methods, methods of systematization, analysis, interpretation were used in the course of the study. Тhe authors of the article note that methods of teaching a foreign language are of great importance for the comprehensive development of primary school students, obtaining high-quality education, good command of English, achieving good vital indicators, conclude that every teacher should be able to use best practices, developing their creative research and effectively teaching modern English. The results of learning through new methods, such as differentiated learning, project-based learning, communicative learning, information and communication training, etc., providing the formation of personality, its language competencies, will undoubtedly contribute to the independent development of the child, the formation of his language competence, the development of cognitive, creative abilities of students.

Main problem: One of the most complicated types of marketing is marketing of medical services or organizations. This can be attributed to many reasons. First of all, person’s life and health is the most important value. One more reason is that budget funds are limited, this forces us to look for extra-budgetary financing sources. At the same time, it follows that the population of the Republic of Kazakhstan, receiving free assistance for a long time, refuse paid medicine, the solvency of a large percentage of the population. Thus, marketing research of the services market is designed to identify the real market share of trade and paid medicine, to fill the need of the qualified medical care, to identify the particularity of demand in various segments and the demographic and psychographic characteristics of the population groups. Purpose: to identify current trends and develop marketing strategies in the regional market of medical services, allowing to identify and strengthen the economic foundations of the functioning of non-profit organizations in the national market. Methods: The research was conducted using traditional methods of marketing research: qualitative: in-depth interview, focus groups; quantitative: survey, as well as methods of economic analysis: comparative, graphical and scenario planning. Results and their significance: the essence of marketing in healthcare is considered, the features of marketing research are taken into account; the medical services market of Pavlodar region is analyzed and evaluated and ways of its improvement are proposed. The results of the study may be useful for the development of measures to further improve the activities of medical organizations in the Republic of Kazakhstan.

Main problem: The article analyzes water quality assurance as the main goal of preserving human health. The study of chemical and microbiological parameters of wastewater and drinking water was carried out using generally accepted standards. The number of deaths associated with the use of contaminated drinking water, according to WHO, tripled in 2021 and reached almost 19 thousand against 6 thousand in 2020. In addition, the number of neoplasms, diseases of the genitourinary system, digestive organs and skin increased by 2 %, to 1.486 million. The reasons for the increase in the level of harmful chemicals and microbiological pollutants in the water are outdated sewage treatment plants, old pipes and disinfection with chlorine. Purpose: Study of the quality of wastewater and drinking water in Pavlodar, study of the quality of wastewater and drinking water in Pavlodar. Methods: Sampling of wastewater, chemical and bacteriological analysis of wastewater and drinking water, statistical method, correlation analysis of experimentally obtained results and calculated characteristics, etc. Results and their significance: In the field of public health risk, pollution of reservoirs that are sources of household drinking water supply and recreational water use, the continuing necessary high deterioration of water supply networks, their accident rate, as a result of low level of operation, failures in the operation of treatment facilities. Hygienic assessment of reservoirs according to complex indicators indicates the continuing high degree of water pollution in places of water use. The water quality indicators of the surface reservoirs of the region remain low in terms of sanitary and chemical (primarily organoleptic and general sanitary), as well as microbiological indicators. According to toxicological indicators, the level of water pollution in places of water use is estimated as moderate. The main pollutants of the Irtysh River in Pavlodar are industrial enterprises and housing and communal facilities that discharge untreated or insufficiently treated wastewater into reservoirs. A complex of causes of drinking water pollution has been identified: high deterioration of water supply networks, their accident rate, because of a low level of operation, failures in the operation of treatment facilities, unfair treatment of industrial wastewater by industrial enterprises of Pavlodar, etc. Priority preventive directions for improving the quality of water as a source of life are the implementation of long-term targeted planning of measures for the modernization of water supply and sewerage networks and facilities in Pavlodar. The state of water supply necessary and measures to improve it should be constantly monitored and considered at meetings of sanitary and anti-epidemic commissions.

Combustion engines operate over a wide range of power and speed. To the greatest extent, this applies to automotive and tractor engines and diesel engines operating at fractional and idle loads for a significant part of the operating time. When designing engines, the choice of their main design and layout parameters is carried out in a comprehensive manner, taking into account the provision of the required power and efficiency in the modes of maximum torque and rated power. However, ensuring the economical operation of modern highly accelerated diesel engines at low loads and idling causes a whole range of problems related mainly to the organization of effective mixture formation and fuel burnout, as well as to ensuring stable fuel supply. Thus, the cycle dose of injected fuel in idle mode is 8–12 times less than the cycle dose in nominal mode, which determines increased requirements for fuel equipment and difficulties in ensuring high-quality mixture formation. At the same time, diesel engines operate in idle mode up to 50 % of the total operating time, consuming up to 15–20% of the fuel. For truck engines, the relative idle time is approximately 20–25 %. Thus, the development of measures to improve the efficiency of diesel engines at idle is relevant. The purpose is to perform a numerical analysis of the effect of switching off cycles in diesel engines for autotractor and diesel locomotive purposes on the working processes in the cylinder and the indicator parameters of the cycle in idle modes. When writing the article, traditional methods (comparison, description, and measurement), generallogical methods and research techniques (analysis, generalization, etc.) were used. A numerical analysis of the operating cycle of a diesel engine equipped with a cycle shutdown system was performed. The relationship between changes in fuel injection characteristics when cycles are turned off with indicator indicators of the engine operating cycle in idle load modes is disclosed. It has been established that the expediency of switching off cycles in a specific engine operation mode is determined primarily by the features of the injection, carburetion and fuel burnout processes.

Main problem: The unfavorable conditions in which a significant part of the population of our country lives (living in conditions of harmful, stressful, physical, chemical and radiation effects), an imbalance in nutrition dictate the need to create a variety of functional products enriched with pro– and prebiotic factors. In the science of nutrition, a functional direction has been developed - this is nutrition, which provides for the consumption of such products of natural origin, which, when used daily, have a regulating effect on the body as a whole, its certain systems, organs, providing a drug-free positive correction of their function. Compared with traditional types of dairy products with high organoleptic and commodity characteristics, produced on the basis of classical technological techniques, dairy products of the new generation should have increased nutritional and biological value. The article is devoted to the research and development of the technology of a new cottage cheese product - cottage cheese paste produced with the addition of lactulose concentrate and fruit and berry fillers. This article discusses the steady trend towards the use of fermented milk products with functional properties in the diet of modern humans. Purpose: Study and development of technology of thermized cottage cheese paste enriched with prebiotic lactulose and fruit and berry fillers. Methods: Analysis and generalization of theoretical information, organoleptic evaluation, physicochemical methods of analysis, microbiological methods of evaluation of cottage cheese paste, quality control of the finished product. Results and their significance: The positive role of prebiotic substances in the vital activity of the macroorganism was studied. It is not for nothing that academician Andrei Georgievich Khramtsov once called lactulose "a miracle made of milk." Lactulose, being a strong bifidogenic factor, allows stabilizing the microflora of the stomach. Lactulose activates the growth of bifidobacteria, which take root well in the intestine and ferment lactulose to form lactic acid. Lactic acid suppresses the development of pathogenic and putrefactive bacteria. As a result of the conducted studies, it was determined that the cottage cheese paste enriched with lactulose had high quality indicators and retained its consumer properties during the entire storage period. The introduction of lactulose into the recipe of cottage cheese paste does not reduce the nutritional advantages of the finished product.

There have been different approaches to the phenomenon of ellipsis in both world and modern Azerbaijani linguistics. Although ellipsis is widely studied between the sides of compound sentences, but we believe that taking the wider and more diverse evolutionary processes in composite sentences, especially in complex sentences into consideration the fact of ellipsis in these constructions needs to be studied more deeply. The article provides detailed information on the characteristics of the formation of elliptical shapes of subordinate compound sentences. As you know, a subordinate compound sentence consists of two components: a main and a subordinate sentence. The ellipsis observed in a subordinate compound sentence does not manifest itself in the form of omission of any part of a sentence as in a simple sentence, but in the context of omission of the whole mai or subordinate sentence. Although the phenomenon of ellipsis can manifest itself in both components, the article deals with the ellipse observed in the main sentence. The article also notes that the phenomenon of ellipsis is naturally more characteristic of dialogic speech. Because this event occurs not as a deliberate, pre-planned form, but as a result of the natural regularity of language. It is clear that the basis of dialogic speech is question and answer sentences. Some of the question and answer sentences, in turn, form the components of a subordinate compound sentence, forming a dialogue unit. In some dialogues with such a construction, the phenomenon of elliptism manifests itself in the question sentence and in others in the answer sentence. It also provides detailed information on the role of many factors in the emergence of this language fact, in particular, the tendency of the language to save. The article also reflects and compares the views of world linguists on the phenomenon of ellipsis. The fact of the language which is dealt with is substantiated by concrete examples.

It is known that an increase in the volume of production in any sphere of production as a consequence increases the intensity of anthropogenic impact on the environment, including the atmosphere. This problem is especially typical for oil refineries. On the one hand, this is due to the complexity of oil refining processes and the release of various hydrocarbon compounds into the atmosphere during processing. Therefore, when implementing sustainable ecological and economic development in the Azerbaijani regions that are associated with oil refining, an increase in the volume of products should not create an increase in environmental impact. This problem is considered one of the factors directly affecting the economic situation of the enterprise, as well as creating certain environmental, social and economic problems for society as a whole. The purpose is to study the possibility of using the correlation-regression method in solving the problem of determining the presence of the decapling effect. The relationship between the volume of petroleum products produced and the amount of pollutants released into the atmosphere is random and is characterized by stochastic and statistical dependence. At the same time, on the basis of a mutual comparison of the methods of correlation and regression analysis and the method of production function, the effectiveness of correlation and regression analysis is determined. The methodological basis of the work was the scientific works of scientists-economists, mathematicians providing the definition of the decoupling effect at industrial enterprises. In the presented methodology, the obtained estimates of the performed in real time vary depending on the values of the set parameter. When developing the presented methodology, the STATISTIKA software package was used. This program was developed by StatSoft. Based on the obtained and experimentally verified data, the equation of linear regression dependence is determined. During the research, it was found that in some cases it is not possible to evaluate the statistical characteristics of a random variable or it is accompanied by serious errors. Therefore, when processing data, instead of mathematical expectations and variances, we used selective mathematical expectations and variances. The analysis of the ecological and economic situation of oil refineries based on correlation and regression analysis allows us to determine the presence of the decapling effect. The obtained correlation coefficient between the volume of production oil products and the volume of emissions into the atmosphere shows that there is no statistically significant relationship between these parameters. Thus, there is an achievement of the decoupling effect between the production of petroleum products and the volume of emissions of pollutants into the atmosphere.

Main problem: The use of waste heat is most often solved by installing heat exchangers, but this is not effective when the temperature of this heat does not exceed 10-15 0 C, in which case this heat can be used using a heat pump. Where can I get this heat? Almost any enterprise needs cooling of any equipment elements or substances – working fluids; the heat received from them can be sent to a heat pump and used here at the enterprise. Purpose: Consideration of the possibility of using the heat of cooling water from the pump CNS 60-165 and the proposal of a new scheme with the installation of a heat pump that uses this heat. Methods: This is achieved due to the fact that it is proposed not to discard the heat, but after its use in the heat pump evaporator, transfer it to the heated medium - water, which is then sent to the shower cabins of the enterprise. Since the showers are located in the same room, the cost of transporting heat and losses will be minimal. Methods: In the course of the research, the possibility of using the waste heat of an industrial enterprise for using it here at the enterprise for the purposes of hot water supply was considered. For these purposes, it is proposed to install a heat pump, thanks to which the thermal potential increases, which makes it possible to fully use the received heat. Results and their significance: As the experience of foreign countries has shown, heat pumps can be widely used in many industrial enterprises, and in conditions of increased competitiveness, in order to reduce energy costs and the cost of manufactured products, install heat pumps to utilize excess heat, for example, process water, which is available in many production allows you to have a significant economic effect.

The article presents a method of teaching object-oriented programming to students of the educational program «Computer Engineering and software» using the project method. The problem of the insufficient level of organization of the educational process in colleges, aimed at studying any kind of object programming, is investigated. In this regard, the important aspects that must be taken into account when constructing a methodology for teaching object-oriented programming, aimed at enhancing the cognitive independence of students, are described in detail. It is shown that the solution to this problem largely depends on the degree of achievement of the learning goals of students specified in GOSTiPO, as well as on the methodological guide to object-oriented programming, developed in accordance with the requirements of modern education. An analysis was made of the State Compulsory Standard for Technical and Vocational Education of the Republic of Kazakhstan, the Model Curriculum and the Working Curriculum in the discipline "Fundamentals of Object-Oriented Programming" for students of the educational program "Computer Engineering and Software" and the teaching methodology developed on their basis. The purpose is to substantiate the methodology for teaching students object-oriented programming, which activates cognitive activity through the use of the project method and its practical application in the educational process. Methods: The methods of analysis, synthesis and deduction were used in the article. Results and their significance: The practical result of the analysis was the method of teaching college students object-oriented programming, using the project method, which is necessary for a more intensive development of cognitive independence. The practical significance of the results is to increase the efficiency of studying the discipline by taking into account the individual characteristics of students.

Main problem: recently, much attention has been paid to energy saving in production, especially when it comes to industrial units that burn fuel. There are several ways to maximize the use of the heat released during the combustion process, for example, to reduce the temperature of the flue gases at the outlet of the unit, by maximizing its use, both in the technological process itself and by installing additional heat-receiving units, for example, air heaters or other heaters. Another way to save money is to reduce heat losses through the lining of these high-temperature units. Metallurgical units that consume a large amount of energy and fuel require an analysis of their consumption, and ways to save their consumption based on the results of the analysis. Purpose: this article considers the possibility of replacing the existing inner insulation layer of the second and third sections of a high-temperature unit - a metallurgical furnace, with a new one with better technical and economic indicators. Methods: the possibility of replacing the existing inner insulation layer of the second and third sections of the high-temperature unit with a new one, with the best technical and economic indicators, was considered. The calculation of heat losses by thermal conductivity through the side surfaces and the roof with new insulation was performed, and the economic efficiency of the proposed solution was proved. Results and their significance: replacing the existing inner layer of insulation - refractory concrete PHLOCAST M30 (thermal conductivity coefficient from 1,4 to 1,45) with the proposed CERALIT GUN HK 70070 (thermal conductivity coefficient from 1,03 to 1,12) will reduce heat loss to the environment, and thus to reduce fuel consumption for the furnace.

As part of solving the priority tasks set in the Address of the President of the Republic of Kazakhstan Kassym-Jomart Tokayev, a significant role is given to the development of the food industry, including dairy products. Big tasks are to be solved by branch science in the field of processing raw materials of plant and animal origin using the achievements of bio- and nanotechnologies to improve the quality, biological, nutritional value and food safety. New approaches are needed to organize the complex processing of plant and animal raw materials in order to improve the economic, social and environmental aspects of the production itself, as well as the life of the population of the Republic of Kazakhstan. Despite the extensive range of processed cheeses, it is constantly updated. This is due to the need to meet the requirements of nutritional science, changing consumer demand, as well as the availability of raw materials and considerations of the profitability of a particular type of cheese. The working hypothesis of the research was the assumption that for the melting of raw materials it is possible to use reagents that affect the active acidity of the medium, stabilize the structure, bind moisture and improve the consistency and organoleptic characteristics of the finished product. The article is devoted to the issue of the process of melting rennet cheeses. The purpose of the article is to show that the melting process is closely related to different forms of raw material protein micelles. In this article, the influence of the type and amount of melting salt on the formation of the structure of processed cheese is considered, the rheological indicators of experimental products are determined in accordance with the scoring of processed cheeses. The indicator of water activity (аw) was established, the microbiological parameters of the experimental products were determined.

Main problem: in Kazakhstan, it is urgent to develop measures aimed at introduction and promotion of Corporate Social Responsibility (CSR) at all levels of Kazakh society, in order to strengthen sustainability of socio-economic development, active participation of business in social modernization and human capital development. In this regard, there is problem of forming effective mechanism of social responsibility, as well as the implementation of principles of corporate social responsibility in management practice of domestic companies. Purpose: this study aims to determine the main stages of the development of CSR in business in Kazakhstan in the specific context the domestic business sector. Methods: methods of systematic, comparative and statistical analysis and of expert assessments were used. Expert survey, document analysis, secondary analysis of sociological research, case study method were used as empirical research methods. The analysis of documents was performed to study the legislative and regulatory frameworks that determine practices of implementing interaction between business and government in modern states. To identify and characterize models of CSR implementation, method of secondary data from a number of foreign comparative studies was applied. Case study method allowed identifying empirical cases of effective implementation of mechanisms of social public-private partnership in field of social investments by domestic business structures. Results and their significance: in the article, based on study of domestic and foreign experience, mechanism of interaction between business and government in solving problems of regional economic systems was considered. Main stages of evolution of CSR practices in Kazakhstan were identified and characterized, structural (subjects, institutions) and regulatory (legislation, strategies, programs, standards) components of interaction between business and government in solving problems of region in modern conditions are established. In addition, main differences between domestic CSR system and European model are considered, general characteristics of which are given in article.

Language is the main vector of communication, in turn, communication develops languages throughout the history of mankind. The natural need of people is communication in their native language, the most convenient means of self-expression and understanding of others. However, modernity has changed the global paradigm of communication, indicating a reassessment of the role of languages by both official and informal communities, including native speakers of various languages. Moreover, the choice of a common communication language is influenced not only by the context, but also by the social, cultural, and economic characteristics of the communicants. In an intercultural context, there is a problem of adaptation of communication participants, closely related to the mastery of the language of the receiving party, ignorance of which is a barrier to successful communication. To develop the skills of tolerant communicative behavior, it is necessary to create special programs equipped with the necessary teaching materials available in international communication languages. Some of these workshops are offered in the presented article. Purpose of the article is to determine the influence of language on the development of economic processes that unite people of different linguistic and socio-cultural backgrounds, as well as to describe the influence of interacting languages on various aspects of professional activity and the role of education in introducing new generations into an intercultural context. To achieve the purpose, the following tasks were put forward: presentation of the main provisions of the economic theory of language; highlighting the controversial role of translators when working with companies in an intercultural environment; identification of problems and the role of teaching foreign languages to students for their successful adaptation in an intercultural professional context. The theoretical and methodological basis was the concepts, hypotheses and theories presented in the works of domestic and foreign researchers. The methodology is based on a systematic approach, in which methods of comparative, structural-functional, and statistical analysis were applied. To obtain empirical data, the methods of questioning and interviewing respondents included in the system of intercultural communication were used. Based on the results obtained, it can be said that, as a rule, in most cases, preference is given to the common language of communication, which is either one of the international languages or the language of the titular nation. Ethnic ties, trust and tolerance are often associated with the possession of a common language of communication.

It is known that the nutritional value of proteins is primarily characterized by the composition of essential amino acids and is determined by their accessibility. Not just proteins are necessary for the good functioning of the human body, but a certain amount of essential amino acids. Since the lack or absence of any of them causes serious health problems. The problem of protein malnutrition is global for many reasons and to solve it, it’s necessary to study the prospects for the possible use of non-traditional sources of dietary protein, namely vegetable protein. Considering this, the article presents the results of studies conducted over several years, the objects of which were dairy and vegetable products and protein hydrolyzate from chickpea flour. At the same time, the possibility of its use as a filler of plant origin to improve the physicochemical and structural-mechanical properties of a new type of finished product was determined. The purpose of these studies is to develop a recipe and determine the technological stages of production of a new type of product of dairy and vegetable origin, which has a functional focus, in which vegetable products are used together with dairy components. It should be noted that when selecting components, preference is given to raw materials grown in the local region. When developing the recipe, the optimal amount of chickpea protein hydrolyzate to be added was determined, which makes it possible to give the finished product not only attractive commercial characteristics, which the modern consumer primarily pays attention to, but also to obtain such product properties that will help strengthen the immune system and the resistance of the human body to adverse conditions environment, what is especially important for the younger generation. When developing the technology of a new dairy-vegetable curd mass, the optimal modes of each technological operation and the stage at which it is most expedient to apply a vegetable component are determined. Launching the developed product into production, the manufacturer will not face the problem of the lack of the necessary equipment and its expensive acquisition, since the production organized according to the proposed technology is maximally adapted to the equipment available at enterprises engaged in the production of cottage cheese and curd products.

Main problem: the development of a new direction in the food industry – the so-called functional nutrition, which means the use of such products of natural origin, which, when systematically used, have a regulatory effect on the body as a whole or on its specific systems and organs, has been widely recognized all over the world: immunostimulants, biocorrectors for blood pressure, cholesterol levels, etc. When creating functional dairy products, ingredients of plant origin are increasingly included in recipes, which are sources of dietary fiber, vitamins and microelements, organic acids and other biologically active compounds, which can also serve as flavor fillers. Purpose: to develop a technology for the preparation of a fermented milk product with the addition of an extract from gourds. To do this, it was necessary: to select the amount (dose) of the yoghurt starter introduced into the prepared milk, and also to investigate the effect of temperature on the fermentation process of the drink; to investigate the amount (dose) of the vegetable filler introduced into the mixture and its effect on the organoleptic characteristics of the drink; to investigate the organoleptic properties of the drink with the melon culture extract added to it before fermentation and after fermentation; to investigate the effect of vegetable filler on the fermentation process; to investigate the effect of the dose of vegetable filler on the process of acid formation; conduct microbiological studies of milk and vegetable yogurt; to investigate the change in the acidity of milk and vegetable yogurt during storage; to investigate the effect of the freezing process on the chemical composition and biological value of the extract. Methods: when performing the practical part of the work, physicochemical, organoleptic and microbiological studies were used. Results and their significance: in the course of the study, it was concluded that by adding an extract of gourds to the technology for the preparation of fermented milk products, a new fermented milk product can be obtained that meets all physicochemical, organoleptic and microbiological requirements. As a result, an original method for the production of a fermented milk drink containing an extract from a melon culture was developed.

Main problem: processes of economic modernization in practical solution should reveal common understanding between institutional, legislative and industrial relations, essence of organizational transformations, formulation of basic provisions for instrumental support of independent transition of technological processes to new round of socio‑economic relations. Processes should be based on new characteristics of standardization, methodology of system functioning, technical conditions, norms, rules, instructions and regulations, which provides for institutional changes. Purpose: to explore new trends in digital transformation of the world economy, as well as to show that tasks and settings of vector of technological processes of digital economy go far beyond known principles of economic development, joining the mainstream of global trends. Methods: theoretical and methodological basis was concepts, hypotheses and theories presented in works of domestic and foreign researchers. The methodology is based on systematic approach, in which methods of comparative, factorial, subject-object, structural-functional, statistical, correlation analysis and extrapolation were applied. Results and their significance: analytical review of theoretical approaches of foreign economists on this problem was carried out, which allowed author to identify theoretical, methodological and applied foundations for determining directions within framework of state strategy for planning socio-economic development. Scientific discussion on conditions for changing model of economic development, modernization of economy with transition to first and second generation platforms, hereinafter referred to as ecosystems, is evaluated. The fundamental differences between theoretical argumentation of proponents of promoted digital technologies and their opponents are determined. Positions of argumentation of impact on change of driving factors are analyzed in order to adjust methods of state policy and choice of vector of technological processes. The question of correlation of macroeconomic theory in evolutionary sense, which goes beyond known principles of economic thought of digital transformation, is considered.

The ideas of accelerated disclosure of the spiritual, intellectual and professional potential of a person have always been occupied by scientists and teachers (Ya.A. Komensky, K.D. Ushinsky, V.A. Sukhomlinsky, Ya. Korchak, A.S. Makarenko, A. Kunanbayev, Y. Altynsarin and others). Modern innovative teachers are guided by a personality-oriented approach, the ideas of subject-subject relations, and generational cooperation. Georgian teacher Sh. A. Amonashvili wrote: «humanitarian pedagogy perceives the child by his nature. He sees the infinity of the child, understands his cosmic quality and prepares him for the service of humanity throughout his life. It establishes the personality of the child through the determination of his will and builds pedagogical systems, the procedural of which predetermines love, optimism and high spiritual morality. Humanitarian pedagogical thinking seeks to take on something enormous, and this is the power of educational systems and processes that have arisen in its bowels». In order to realize the value of self-disclosure of innovative abilities of students, ensuring the role of a teacher, it is necessary to recognize the intellectual reflexive mechanism of a person as the main subject of Education. The purpose of the article is to identify innovative methods and models of pedagogical activity for the cultivation of innovative abilities of students, which determine the development of the country. The study used methods such as analysis, generalization, synthesis, modeling of scientific sources.

The present stage of development of power systems is characterized by the need to increase their intelligence, that is, the formation of an environment capable of solving the problems of effective management of all components included in the power system. One of the features of modern energy systems is an active consumer, that is, a consumer who has the opportunity to optimize the schedule of loading their capacities, planning energy consumption, intellectualization of energy consumption. In addition to the fact that there are digital systems for collecting, processing and presenting information, as well as transmitting this information via the Internet, to solve the most difficult task of managing power systems, it is necessary to develop a large number of models adequate to real processes that can describe the processes taking place in the power system under consideration. The purpose is to develop models capable of adequately describing the interrelated processes occurring in the considered elements of the power system, as well as in the aggregate of related elements; development of methods that allow solving problems of effective control of elements of energy systems on the basis of the proposed intelligent models. To solve the problem of increasing the intelligence of the power system, nonlinear adaptive models of electrical complexes of an energy-intensive enterprise included in the power system were developed on the basis of balance equations and artificial intelligence methods. The production of alumina with the properties of inertia, nonlinearity and closure is chosen as the production under consideration. This type of production was chosen as the most difficult to predict due to the unpredictability of changes in energy consumption during the transition to other modes of its operation, associated, for example, with the receipt of raw materials with a different chemical composition for processing. Static and dynamic models of energy consumption of electrotechnical complexes with continuous inertial nonlinear closed production based on artificial intelligence methods have been developed, which makes it possible to eliminate the need to use long time series of retrospective data. For the considered type of continuous energy-intensive production, dynamic characteristics of energy consumption and technological processes are obtained from the main controlled parameters, which make it possible to predict emergency situations and partly man-made disasters. On the basis of a genetic algorithm, a multiparametric optimization problem of energy management of continuous production has been solved, taking into account technological parameters and cost factors.

Main problem: the globalization of the information sphere has led to a significant increase in the volume of stored and processed information. To increase the processing speed and provide information to the recipient, it is logical to increase the power of the equipment on which the information is processed. But such a path also leads to an increase in financial costs for continuous modernization or complete updating of computer equipment and application software. Purpose: an alternative solution to increasing the capacity of hardware and software may be to optimize the process of organizing data storage, and already at the stage of information analysis. At the initial stages of the task, a huge amount of information is collected and processed, which needs to be classified, to identify essential and non-essential information flows for the information system being developed, etc. The quality of functioning of the developed information system as a whole and its individual modules in particular will depend on how correctly and fully the structuring and systematization of data will be carried out. Methods: modern methodologies of conceptual design of information systems shift the emphasis from software implementation to analysis and modeling of the production environment. The tools used in the process of conceptual modeling allow you to automate the main part of the processes, including the development of program code in the format of templates (patterns), including the preparation of documentation for the software product being developed. Since modern methodologies and tools are based on the use of powerful graphical tools, this significantly increases the visibility and simplifies the process of making adjustments to the information system project, actually using the "Drag-and-Drop" technology. This allows you to redistribute the time spent on the implementation of the first stages of information system development, allocating more time to the analysis and design of the software environment at an abstract, conceptual level. Results and their significance: the stages of analysis and design do not require large financial costs and are more variable. Information at these stages is easier to adjust and change than, for example, at the stage of writing program code. In addition, it is at these stages that the most active interaction between the developer and the customer is carried out, where maximum visibility and variability of the project of the future information system is required. And the use of modern software design methodologies significantly increases the efficiency of the first stages of information system design.

Main problem: Monitoring the reliability of the foundation of roads, buildings and engineering structures is an important aspect of geophysical research. Modeling of geological heterogeneities is relevant. Moreover, the use of computer modeling in this problem is associated with computational costs. Purpose: Analysis of the vertical electrical sounding (VES) method for modeling the physical properties of soil and their changes when exposed to elastic vibrations. Methods: To achieve the goal, the vertical electrical sounding (VES) method was used, using a one-dimensional model of the geological environment. The direct VES problem was solved by calculating the Hankel integral. Results and their significance: The study made it possible to model a large number of soil layers using the VES method. The results obtained make it possible to determine the parameters of detected objects and changes in the characteristics of the controlled environment when exposed to elastic vibrations. The significance of the results lies in the possibility of improving the method for modeling the physical properties of soil and taking into account their changes under the influence of elastic vibrations, which helps to increase the efficiency and accuracy of monitoring the reliability of the foundation.

Main problem: The article highlights the problem of tests as methods of psychology, the influence of validity and reliability on the results of psychological research. Purpose: Uncovering the significance of validity and reliability on psychological research results. Results and their significance: Testing is an important method in psychology, allowing measuring various aspects of the psyche and behavior of a person. The history of the development of tests in psychology goes back more than a century and began with the work of Francis Galton and Alfred Binet. Over time, the tests have become widely used in various fields such as education, personnel selection, clinical diagnosis and research. Basic requirements for tests include reliability (repeatability of results), validity (measurement accuracy), standardization (same test conditions) and objectivity (lack of subjectivity in assessment). Tests must be designed using psychometric principles to ensure accuracy and validity of results. Modern tests include a variety of measurement techniques, such as tests of personality, intelligence, aptitude, and professional skills. The use of tests in psychology requires professional training to correctly interpret the results and make valid conclusions. Testing as a method of psychology continues to evolve, and its role remains key in the study of the human psyche and behavior. Testing in psychology has a wide range of applications, including assessing personality traits, identifying psychological disorders, and predicting behavior and success in various areas of life. The development of computer-based tests and online platforms makes testing more efficient and convenient for researchers and participants. Modern tests increasingly take into account cultural differences and the diversity of individual characteristics, which contributes to more accurate and tailored assessments. It is important to remember that the use of tests requires ethics, confidentiality and compliance to ensure the reliability and validity of the data obtained.

The main problem: Today, the introduction of inclusive education is becoming one of the priorities of the state policy of the Republic of Kazakhstan in the system of modern education. In accordance with the law on Education, equal access to quality education for citizens is guaranteed, taking into account their intellectual development, psychophysiological and individual characteristics. The article is devoted to the analysis of the development of inclusive education. The author considers the problems on the way to the introduction of inclusive education, provides an analysis of the experience of conducting an IT school within the framework of inclusive education. An attempt has been made to identify the factors contributing to the successful implementation of inclusive education methods in the modern educational space. Objective: To consider the issues of the development of inclusive education in the Republic of Kazakhstan. To present the methodology of teaching children with special educational needs, to suggest possible ways to solve problems on the way of introducing inclusive education into the domestic education system. Methods: The methods of analysis, synthesis and deduction were used in the article. Results and their significance: Based on the results of the work carried out aimed at identifying the main problems hindering the process of implementing inclusive education, as well as based on the results of the analysis and the identified main aspects in the cognitive activity of children with hearing and speech disorders, the author of the article proposes a methodology for teaching children multimedia technologies. In addition, the author clearly substantiates the need to prepare a teacher for the use of inclusive education methods, due to the lack of willingness of some teachers to teach in a class (group) in which people with disabilities study, fearing to get into a situation of psychological and professional discomfort.

Main problem: At the present stage of life, Innovations in the financial sector contribute to the optimization of financial intermediation and, in turn, stimulate economic growth. Financial innovations increase the efficiency of the allocation of savings capital to investment capital, as well as increase liquidity in the markets. As the digital economy has developed, the functionality of traditional large financial institutions has been partially replaced by financial technologies (FinTech). FinTech involves the convergence of traditional financial services with mobile services, social media services, big data aggregation and processing, and cloud technologies. Purpose of this article is to identify the main directions of the electronic financial services market in the Republic of Kazakhstan, identify the main problems and prospects for the development of the financial sector of the economy. Methods: The work used general scientific methods of comparative system, vertical and horizontal analysis, structural and functional method, analytical techniques, economic and statistical research methods. The results and their significance: the authors identified the main directions of digitalization of the financial sector of the modern economy, noted the role of FinTech companies and services in both theoretical and practical terms, and provided relevant approaches to the definition of this concept in the economic literature. The main reasons and factors for the development of this direction of digitalization of the financial sector are substantiated, including the concept of financial accessibility, the advantages and disadvantages of FinTech, various approaches to their classification, country and regional characteristics, and an analysis of development trends. The crowdfunding direction of FinTech is noted, approaches to its definition and classification are given, the advantages of the crowdfunding mechanism are revealed, and its role in the modern economy is analyzed. The trend of algorithmic trading development as the most important direction of digitalization of the financial sector is investigated. A detailed analysis of mobile financial services as one of the fastest-growing areas of FinTech is carried out, approaches to their classification are given, factors stimulating the growth of mobile payments, country and regional characteristics are substantiated. The main directions of digitalization of the insurance sector are analyzed, reasonable conclusions about the advantages of InsurTech are made.

The main problem is the relevance of the research topic. The history of the development of civilization shows that law and morality as components of the spiritual culture of society are organically linked to each other. The legal system of any state enshrines the moral requirements and moral principles that are vital for the whole society. When creating norms or improving them, the legislator must take into account the state of the public moral culture of the population so that the laws being developed are fair and perceived by members of society. Purpose: The purpose of the study is the further theoretical development of a set of criminal law issues related to determining the place of morality in the system of objects of criminal law protection, their role in the system of measures to combat crime, as well as the development on this basis of proposals and recommendations for improving criminal legislation regulating liability for attacks on public morality. Methods: Methodology and methodology of the study. The methodological basis of the study was made up of: generally recognized methods of scientific research of the phenomena of reality in their interrelation and interdependence both at the theoretical level (systemic, comparative legal, formal legal, historical methods of analysis, etc.) and at the empirical level (statistical analysis, questionnaires, research of documents, printed publications); the main provisions of the theory of criminal law, ethics, philosophy, psychology; rules of formal logic. The results and their significance: The stated circumstances, as well as the lack of elaboration and discussion of most of the provisions related to the modern legal regulation of crimes against public morality and their qualifications, determined the choice of the research topic. Crimes against morality are mostly committed intentionally. For example, involvement in prostitution, the organization of brothels for prostitution or maintenance, as well as other types of criminal acts directed against humanity (morality), are committed with direct intent. A person who organizes and maintains brothels for prostitution is aware that he is doing this for profit. Among the crimes committed against humanity (morality), animal abuse is committed mainly out of hooligan motives.