The article discusses a way to increase the efficiency of automobile operation by improving methods for ensuring the operability of electrical equipment based on the diagnosis of generators by output voltage. As a diagnosis, it is proposed to perform a spectral analysis of the generated voltage in idle mode and to determine the state of various generator elements from the results. The effectiveness of the proposed solutions is determined by the non-separable diagnostics of the generator, which, based on a thorough examination, can determine the state of various elements of the generator. This method does not require taking the generator out of operation, does not depend on its design and can be used in difficult operating conditions to obtain preliminary information about the state of the generator at the initial stage of maintenance.

In the article the authors examine the main features, types, especially operating systems, their main objectives, main functions, rules and content requirements, aesthetic requirements, the main characteristic of components and elements are considered.

In article it is shown that in a control system of efficiency of the company accurate focus on result and the coordinated movement of all organizational elements to the uniform purpose is. It is reached by creation of a tree of the purposes and definition of the most critical areas for control and control indicators of efficiency a consequence of that is the increase in cost of the company.

In article it is spoken about need increase of a role of the state in regulation of an ecological factor, elements of system of regulation of the ecological account are considered. The ecological policy is developed and recommendations for the successful solution of problems of protection of environment are made.

This article is devoted to frame performance of the traditional ceremony – courtship of Ingush wedding. National specific of the structure this ceremony passing and elements which are typical for Ingush nation are presented.

This article presents the results of research of technology of curd product that is accessible to any enterprise and not requiring from the producer of additional expenses on his mastering are expounded in this article, and also possessing a biological and food value due to the use of vitamins, macro and microelements, bioactive and pectin substances.

In the article the traditional social and cultural values under urbanization are discussed, the trends in the development of ethno-cultural processes are characterized. On the basis of the sociological study the conservation of traditional rituals is especially analyzed, ethno cultural orientation and knowledge level of certain elements of national culture is identified. In our view, it is interesting to consider the transition of anthroponomy and other proper names in the category of urbanoniums. It is the process of the reflecting the historical, social, political and cultural transformation. It describes a certain historical period and helps to follow up the history of the city. Also urbanonims base the main source of linguistic and regional geographic research. So, some examples of urbanonims in Kazakh, Russian and English languages are given.

In the article the traditional socio-cultural values in terms of urbanization are discussed, the trends in the development of ethno-cultural processes are characterized. On the basis of the sociological study the conservation of traditionalrituals is especially analyzed, ethno cultural orientation and level of knowledge of certain elements of national culture is identified.In our view, it’s interesting to consider the transition of anthroponomy and other proper names in the category of urbanoniums. It is the process of the reflecting the historical, social, political and cultural transformation. It describes a certain historical period and helps with it to follow up the history of the city. Alsourbanonims base the main source of linguistic and regional geographic research. So, there are some examples of rise of urbanonims in Kazakh, Russian and English languages are given.

In this article, the main directions and measures of the state support of monotowns in Kazakhstan aimed at providing their sustainable development are considered. The urgency of the topic is substantiated by the fact that there is intensification of negative socioeconomic tendencies in the majority of monotowns. Authors have specified concept of the monotown, their classification and typological characteristics are considered. Consider the statement by the Government of the Republic of Kazakhstan single-industry towns development program, its basic concepts and elements. Also consider tools monocities diversification of the economy, the use of them in order to create conditions for the achievement of a stable socio-economic situation.

The main provisions of the road quality management concept are outlined, as well as the tasks are defined that need to be solved in order to ensure the management of the system at three levels: strategic, tactical and operational.

Changes in the education system have influenced the content of education in primary school. Working with younger students requires teachers to use modern methods. Determining the leading principles of teaching, the priority strategies of learning and the organization of an English lesson is what contributes to the 36 Вестник Инновационного Евразийского университета. 2018. № 1 ISSN 1729-536X effectiveness of teaching. The article is devoted to the analysis of the characteristics of teaching English in elementary school in the context of updated educational content. The authors reviewed the elements of the lesson, methods and techniques of organizing the educational process in primary school, described the factors affecting the effectiveness of training. The authors also tried to uncover a number of problems and give recommendations that arise in connection with the tendency to learn English in primary school.

This article discusses the theoretical aspects of professional staff communication as one of the elements of the development of personnel

Annotation. In this article the analysis of genesis of views of education as system of communications of elements, functions and the purposes is considered. The essence of the modern national doctrine of formation of the Republic of Kazakhstan as sovereign, independent state is also stated.

The article describes the relationship of man as a species with nature. It is shown that this relationship is determined by the conditions of existence, the quality of air and water, the necessary elements of nutrition. It is also pointed to the role of environmental conditions-optimal for the body, determining human health and life expectancy

The article is devoted to the actual problem of tooth loss and solving the problem through the development of tissue engineering. Tissue engineering is a set of methods and procedures aimed at the regeneration of biological tissues. It includes a triad of basic elements: stem cells, extracellular matrix or scaffold, growth factors and signaling pathways. An important role in solving the existing problems is associated with stem cells. Dental stem cells are capable of self-renewal and differentiation. Based on the analysis, it was found that each type of dental stem cells has its own characteristics and applications not only in dentistry, but also in other areas of medicine.

On the basis of research on bacteriological indicators of the water supply system in the Ekibastuz region for the period 2016-2018 the 310 cases of detection of pathogenic microflora were identified. The chemical indicators are given the results of research to determine the content of toxic elements and heavy metals in the source and purified water, as well as in the distribution network of Ekibastuz. The largest number of pathogenic microflora cases and a high concentration of chemical elements are noted during the flood season. Sporadic pathogenic microflora and chemical elements are also recorded in the winter and summer periods.

The research explores the scientific approach to the concept and essence of the forensic characteristics of crimes, the concept’s formation history, and also draws attention to the role and place of this scientific category in the theory of modern forensic science. The article emphasizes that the forensic characteristic, which is an independent element of a private forensic methodology for investigating crimes, is one of the basic concepts of forensic theory and practice. The author notes that the phrase “forensic characteristics of crimes” should be understood as an ordinary data system on the elements of certain types of crimes and their mechanisms. Concerning specific crimes, it is necessary to consider the issue of the forensic information system for a specific offence, which is reduced to the subject of the investigation. The article emphasizes the importance of the category of “forensic characteristics of a crime” for countering novel criminal offences, among which the author highlights cybercrime. There is no doubt that this concept of the forensic characteristics of crimes is capable of investigating the main practical goals, including new elements of criminal offences, along with the solution of scientific tasks for the disclosure, investigation and prevention of crimes. As a result, the author concludes that it is precisely the concept of the forensic characteristics of crimes formulated in the article that, along with the solution of scientific tasks for the disclosure, investigation and prevention of crimes, is capable of Вестник Инновационного Евразийского университета. 2020. № 2 ISSN 1729-536X 67 implementing tasks related to the main practical goals of the investigation, including new elements of criminal offences.

The article presents studies on the morphological picture of the blood of fish in a comparative aspect, depending on age and species. In recent years, the influence of anthropogenic factors on the ecosystem of water bodies has intensified. In this regard, the main direction of solving the problems of ichthy -epizootological situations is new areas in veterinary medicine, in particular, hematological recognition of shaped elements in the blood of fish. To identify and understand the state of the fish organism, which they reflect, the researcher must first of all correctly determine these forms of cells in the blood, especially this applies to white blood cells. Our review is brief and does not pretend to be completely complete literature data on this issue. All this together gives a complex morphological picture of the blood of fish, which is difficult to typify. Unlike higher vertebrates, fish lack bone marrow and lymph nodes, hematopoiesis occurs both in organs, which include reticular syncytium (gill apparatus, kidneys, lymphoid organ), and vascular endothelium of the gill apparatus and heart and spleen and, in some cases, intestinal mucosa. In bone fish, the anterior part of the kidneys is the main organ of hematopoiesis; hematopoiesis also occurs in the lymphoid organs and in the spleen. The purpose of this research is to study the morphological picture of the blood of fish in a comparative aspect, depending on age and species. 3-7 animals from each age group of fish were examined on average. To study the morphological composition of blood from fish, blood was taken from gill vessels and from the heart cavity. In the process of research, it was found that the peculiarity of fish is the presence in the blood of both mature and young red blood cells, red blood cells have nuclei. Bony fish have four types of myeloid cells at all stages of development, known in the hematology of higher vertebrates and humans. A distinctive feature of fish granulocytes is the ability to observe leukocytes in all successive stages of filling the cytoplasm with granules, and the nucleus of th ese cells is very rarely lobed. Unlike fish, in mammals it is very difficult to distinguish between the stages of development of basophils and eosinophils (myelocytes, juvenile, stab and segmented), since the segmentation of the nucleus is weakly expressed , and the number of granules does not increase as the cells mature. It can be noted that the studies initiated can contribute to determining the choice of hematological studies. Given the above factors, a detailed epidemiological classification of hematolo gical studies will be obtained. The research results make certain additions to the procedures of veterinary-hematological studies in the field of ichthyopathology. In the future, research will continue in the direction of hematological diagnosis of fish di seases and prerequisites will be created for a detailed epidemiological classification of hematological studies.

The article describes the results of a study of the effectiveness of the standards being implemented in railway transport. A general view of efficiency and standardization was analyzed. It was studied which document regulates the application of standardization in the Republic of Kazakhstan. Further, the international railway standard IRIS «International Railway Industry Standard» was taken as a basis, which, in turn, is based on the international standard ISO 9001. A study of the methods and types of effectiveness of standards was carried out, as well as an analysis of the applied international standard in the field of railway transport IRIS. The purpose of this standard is to create a business management system that allows for continual improvement, with an emphasis on preventing and reducing delivery defects. It is important to note that the effectiveness of standardization is evidenced by examples showing that ignoring standards turns out to be huge losses for a company for a number of reasons, for example, because its products have not been certified for compliance with a specific standard; due to the additional costs of the company for reworking products that are not manufactured in accordance with the requirements of the standards in the country of export. An analysis of the effectiveness of standardization work in the railway industry can be expressed in relative terms of the effects obtained as a result of the application of the standard: for example, in an increase in the level of safety or in economic growth. The basis for determining the actual effect is the actual level of production that existed at the given enterprise before the introduction of the standard. The measures that can be applied in order to increase the efficiency of solving the problems of developing standardization in the field of railway transport have been studied. Such standardization as one of the elements of technical regulation can provide a contribution to economic growth in excess of the corresponding indicators from the introduction of patents and licenses.

The article discusses methods for creating smart things, using the example of the use of innovative technologies in the field of materials for clothing and footwear. The factors of form formation are substantiated by the example of the preferences of an individual customer who forms its image through accessories and shoes. The author considers the factors of shaping, based on the special functional features of shoes in connection with ergonomic factors. The designer is able to foresee the factor of transformability in modern footwear, changes in functional qualities, appearance, and design features of new footwear. As a result, on the basis of these transformations, to get a new emotional image and a new form. The shape of the shoe becomes a factor for transformations at the request of the customer. The article discusses the functional tasks of this shoe, plastic characteristics, technical and design tasks. As research methods, the article proposes variants of experimental models with possible stages of transformation, presents preliminary technical data, conducts a comparative analysis with innovative footwear samples of famous world designers, and makes assumptions about the development of this model in the future. An experimental method was used during the study. A shoe shape was developed, which took into account the preferences of the age group of 12-16 years old, relying on this category of consumers, we were able to go beyond the rational understanding of shoes as a functional form and gave it the meaning of a fantastic image, which allowed us to consider the form in the semantic and artistic context dictated by this age group of consumers. In addition, investing in this model the concept of "smart shoes", we considered not only the ability of modification and transformation by rearranging replaceable parts, the possibility of designing and reincarnating from one form to another, combining the constituent elements of the shoe into one whole, but also the development of the creative potential of the consumer, who at its own discretion can rebuild the structure and, in fact, as a designer itself, form a new model. The article makes assumptions about its further development in various fields of activity. For example, medicine, sports, art, etc. Considering the introduction of new materials, we relied on discoveries in the field of nanotechnology and considered among the possible features of this model the change in color on the basis, the reaction of materials to light, temperature, etc. The project is aimed at creating such shoes that will be developed for a wide range of consumers thanks to the wide range of possibilities contained in the design of the form and the features of modern materials.

Main problem: The article examines promising directions in the production of fortified food products in Kazakhstan and Russia. The authors carried out an analytical review of the current state of production of fortified bakery products on the territory of the Russian Federation and the Republic of Kazakhstan. Anemia has been described as one of the most common consequences of micronutrient deficiencies. The problems associated with anemia lead to serious complications for the health and well-being of people. Lack of folic acid and vitamins in the diet is the cause of cardiovascular disease, maternal and child mortality. Purpose: The article considers the problem of significant deviations in nutrition of almost all groups of the population of Russia and Kazakhstan, regardless of lifestyle, habits or income level, which have an extremely negative effect on the health of the nation: the average life expectancy decreases, the productivity of the working-age population and resistance to diseases decrease. Methods: Based on the studied domestic and foreign technical literature, patent information, an analytical review of the current state and prospects of the production of fortified food products in the Russian Federation and the Republic of Kazakhstan was carried out. Results and their significance: The authors have shown that food fortification is the practice of purposefully increasing the content of vitamins and microelements in food to improve the nutritional quality of food and have a positive effect on human health. The authors considered the question of how the problem of micronutrient deficiency, including iron, is currently being effectively solved in many countries by enriching food products of mass consumption with vitamins and minerals.

Main problem: Technogenic "metamorphosis" of vegetation near such large industrial facilities as Pavlodar is considered to be the result of various active chemical and mechanical factors provoked by economic activities associated with the influence of emissions from industrial companies. The effect of anthropogenic impacts on vegetation in all regions of Kazakhstan varies and is largely dependent on the economic development of the territory, but in any case, the end result of this impact is the change in the vegetation, causing violations of with structure, reduced vodorazdelnaya flora and productivity of communities. This, in turn, can cause infection of herbaceous plants with pathogenic fungi, which then carry with them: a decrease in the intensity of plant growth, a deterioration in their decorative qualities, a decrease in the survival of the biological species. Purpose: to study the types of fungi-pathogens of phytopathogenic diseases and to determine the degree of modification of the plant component, which is under intense negative technogenic influence from the Aksu Ferroalloy Plant (AFР). Мethods: For the experimental study, species of plants such as: Artemisia dracunculus L; Artemesia vulgaris L; Atriplex fera L; Atriplex patula L; Artemisia annua L were selected for the content of fungipathogens of phytopathogenic diseases. Results and their significance: This experimental study was aimed at the presence of fungi-pathogens of herbaceous plants as a result of human impact, occurring near the industrial zone "AFР". The composition of fungi-pathogens of herbaceous plants collected in this industrial zone was considered and studied. According to the results of an experimental laboratory study, phytopathogenic fungi of herbaceous plants belonging to 1 ordo, 1 familia, and 4 species were found.

The main problem of the article discusses the methods of developing a collection of casual clothing with elements of ethnic style, using the example of innovative technologies in the field of creating ornaments for clothing. Factors of formation of ornaments based on the structure of the human body are justified. The author considers the factors of shaping, based on special visual features of clothing in connection with ergonomic factors. Study of the specifics of ornamental motifs to transform them into a component of modern youth clothing. The authors of the article monitored the environmental approach, that is, the acquisition of knowledge about cultural values based on the selection of all the best that was created by the people, introduction to cultural folk traditions, dialogue between man and culture. When writing the article, we used author's and experimental research methods, fixing information in tables and author's sketches. The study of categories and definitions was carried out by the method of selecting and classifying information, as well as its analysis. Comparative analysis of forms of traditional and modern culture, study of bibliographies on architecture, art, philosophy, psychology; analysis of materials of scientific monographs, abstracts and dissertations, articles, creative essays of masters of architecture and art, from the point of view of the concepts, principles, conceptual and terminological formulations contained in them. In addition, private scientific methods are used: analysis of literary sources to identify current trends in the formation of art. Аs the results of the research, a collection has been developed that considers various types of clothing decoration, uses methods for including ornaments in the structural structure of the costume and provides models, calculations and drawings. The author's collection justifies the use of ornaments in connection with the selected artistic and figurative task of the collection, as well as in connection with its functional purpose. All these factors are formative. And the practical experience of this research shows the relevance of this topic in connection with the need not only to promote the historical achievements of Kazakhstan's culture to the masses and popularize them, but also as a method that helps to understand the possibilities of its translation into modern design objects. Keywords: ornament, youth, model, collection, Kazakhstan.

The article is devoted to one of the unproved questions of the syntax of the Russian language – the functioning of egocentric elements in the monuments of ancient Russian writing of the XI-XIV centuries, in the chronicle genre in particular. It is the diachronic research that will help shed light on the nature, functional and semantic features of egocentric units in modern Russia. The article considers the main features of metatextual units, which, in the author's opinion, clarify the «semantic pattern» of the main text, connect, strengthen and fasten its various elements, and also manifests their role as a kind of explicators of the speaker's position in Old Russian chronicle texts. The presence of metatextual units in the chronicle text confirms the scientific position about the presence of the author's beginning in the works of Old Russian literature, which allows us to identify the author's attitude to the language code of his utterance (speech work). In general, metatextual interpretation is aimed at simplifying the understanding of an object and finding a new element base for its description.

In this regard, there is a need to search for new ways and scientific and methodological developments to rationalize methods of teaching game techniques and the development of physical qualities, such as coordination abilities, which are well developed at the initial stage of training in rhythmic gymnastics. The aim of the study was to determine the influence of rhythmic gymnastics on the development of coordination abilities in young football players aged 7-10. The main method of obtaining results in the study of motor qualities was testing. It allowed us to determine the level of functional state of the cardiovascular system, as well as the level of development of coordination abilities, namely, rhythm, plasticity, accuracy, balance and orientation in space. As a result of the experiment, the effectiveness of the developed program was revealed. The results of the study showed that the use of elements of rhythmic gymnastics bring a variety of tools to the lesson and allow the coach to fully meet the physiological requirements of this age. The rhythmic gymnastics program can be widely used in children's football institutions, as the level of coordination abilities of athletes increases in the course of training, and better conditions are provided for the formation of skills to manage their movements, that is, to act purposefully, productively, and economically.

The article examines modern technologies that contribute to the implementation of creative design ideas, based on the analysis of modern lighting technology and energy saving factors. It is hypothesized that the goal of modern design in this article is defined as the creation of new space and values, through the renewal of the human environment. The basis for confirming this hypothesis should be the justification for the use of lighting technology and electronicsin solving conceptual and artistic design problems. The scientific research is based on the methodology for making design decisions and ways to open new ways for the implementation of creative imagination and new conceptual solutions of the designer, on the example of designing the interior of a cafe. The author considers and substantiates such terms as intelligent space, interior as a process, integrated lighting systems, informatization of interior space, new methods of decoration, etc. Examples of analysis of design situations from are given the point of view of functional tasks, classification of requirements when making design decisions is substantiated. Lighting technologies in the interior are viewed as a tool that solves a whole range of tasks that combine aesthetic and technological principles of interior shaping. Modern technology is seen as a designer's tool that should be used to understand the role of design as a conduit of scientific advances and innovative technologies to the consumer environment.

The sharp deterioration of the environmental situation in the Republic of Kazakhstan, associated with human activity and the impact of harmful factors on the environment, affected the quality of food consumed by insufficient consumption of domestic fruit and vegetable products containing vitamins, minerals of an alkaline nature, carbohydrates, vegetable proteins, pectin substances and active fiber. The problem of improving the quality of growing and processing fruits and vegetables is one of the main tasks of the food independence of the Republic of Kazakhstan. Currently, the share of large vegetable farms in the Republic of Kazakhstan is only 10%. The volume of industrial processing of fruit and vegetable crops in Kazakhstan is insignificant. The demand for domestic fruit and vegetable products in the country is met only by 35-40%, most of it is imported from countries such as Russia, Kyrgyzstan, Uzbekistan and China. There is a need for the development of organic vegetable growing in Kazakhstan and the creation of new types of domestic fruit and vegetable products containing a sufficient amount of useful and active substances that can bind and remove toxic substances and radioactive elements from the human body. The purpose of the work is to improve the technology of fruit and vegetable semi-finished products with natural spicy and aromatic additives, to develop a multi-component recipe for vegetable mixtures and a method for producing quick-frozen vegetable mixtures with high quality indicators. These studies were aimed at studying the chemical composition and functional and technological properties of vegetables and spicy - aromatic plants for the content of biogenic compounds: carbohydrates, proteins, vitamins, essential oils, minerals and other substances. The structure of plant tissues was studied and the mass fraction of moisture, dry matter, fiber, mono - and disaccharides, pectin substances, vitamin C was determined, the formulation and production technology of Assorted vegetable mixtures were developed, and quality indicators were determined.

The article discusses ways to improve the oral and speech skills of primary school students, where the primary role is given to interactive strategies aimed at organizing the optimal interaction of students with other subjects of the educational process in a communicative educational environment. Currently, the main criteria and indicators of the methodology for the development of foreign language communicative competence of schoolchildren have changed, the basic basis of the system of techniques and methods of teaching English to primary schoolchildren based on the use of interactive cognitive strategies. The authors call a complex of exercises of a receptive, productive and productive-creative nature, which is consistently implemented at all stages of the corresponding technology: motivational-stimulating, informational, analytical, actualization, productive, creative, analytical and evaluative. The article describes their influence on the development of language competencies and creative abilities of primary schoolchildren. The authors note that the motivational-stimulating, informational, analytical stages, the stage of actualization, as well as the productive, creative, analytical-evaluative stages, provide for the involvement of students in joint activities to master the content of cognitive problems in English, it presupposes the interiorization of communicative skills by younger students in accordance with with the accepted norms of interaction, the organization of the development of oral speech in English lessons in the lower grades based on the use of interactive cognitive strategies in accordance with the level of their linguistic and sociocultural knowledge, skills and abilities. To study various approaches in the development of oral and speech skills in lower grades based on interactive cognitive strategies, analysis of a set of tasks and exercises at different stages of the formation of oral and speech competence in lower grades using interactive cognitive strategies, goals and objectives of the practical application of interactive cognitive strategies when teaching foreign language communication, the contradictions between social expectations and the objective need for educational practice in the creation and implementation of a special methodology for the development of oral speech in primary grades based on the use of interactive cognitive strategies. Methods: during the study, a descriptive method, methods of systematization, analysis, interpretation were used. The authors of the article note that the integration of communicative activity in a foreign language with project, research, musical, visual, subject, literary and creative is of great importance for the comprehensive development of the skills and abilities of oral speech of primary school students when using interactive cognitive strategies. The developed training model for the development of oral and speech skills in the lower grades on the basis of interactive cognitive strategies (goal, objectives, approaches, principles, content, technology, means, performance criteria, conditions for implementation) contributes to the development of communication skills and linguistic competencies in the process of mastering foreign language students of elementary grades.

Main problem: The use of waste heat is most often solved by installing heat exchangers, but this is not effective when the temperature of this heat does not exceed 10-15 0 C, in which case this heat can be used using a heat pump. Where can I get this heat? Almost any enterprise needs cooling of any equipment elements or substances – working fluids; the heat received from them can be sent to a heat pump and used here at the enterprise. Purpose: Consideration of the possibility of using the heat of cooling water from the pump CNS 60-165 and the proposal of a new scheme with the installation of a heat pump that uses this heat. Methods: This is achieved due to the fact that it is proposed not to discard the heat, but after its use in the heat pump evaporator, transfer it to the heated medium - water, which is then sent to the shower cabins of the enterprise. Since the showers are located in the same room, the cost of transporting heat and losses will be minimal. Methods: In the course of the research, the possibility of using the waste heat of an industrial enterprise for using it here at the enterprise for the purposes of hot water supply was considered. For these purposes, it is proposed to install a heat pump, thanks to which the thermal potential increases, which makes it possible to fully use the received heat. Results and their significance: As the experience of foreign countries has shown, heat pumps can be widely used in many industrial enterprises, and in conditions of increased competitiveness, in order to reduce energy costs and the cost of manufactured products, install heat pumps to utilize excess heat, for example, process water, which is available in many production allows you to have a significant economic effect.

Main problem: At present, service, decorative and hunting dog breeding is intensively developing in Russia and in the Tula region. So, in 2020, 119 high-breed puppies were registered in the Book of Pedigree Breeding, and in 2021 already 164 puppies, mostly decorative and service breeds. Thus, the number of pedigreed dogs susceptible to various infectious diseases is increasing annually. Canine distemper is one of the most widespread viral diseases of dogs all over the world, including in Russia. Analyzing the "Patient Admission Logs" of veterinary clinics in the city of Tula, it was found that 44 % of dogs that fell ill with diseases of infectious etiology were diagnosed with canine distemper. Purpose: The aim of our research was to study the epizootological features of the course of canine distemper among dogs in the Tula region of Russia. To achieve the intended goal, it was necessary to solve the following problem: to analyze the breed and age factors for the incidence of canine distemper. Methods: Analysis of data from private veterinary clinics reporting on the incidence of small domestic animals was used. Results and their significance: As a result of studying the epizootic situation of canine distemper among dogs, the following data were obtained: The disease is observed throughout the year and has the character of undamped fluctuations subject to sharp seasonal changes. The maximum number of diseased dogs in all years of observation is recorded in March - 6.2 cases per 1000 individuals. It has been established that among the infectious diseases of dogs, distemper occupies the first place, and there is an annual increase in the number of dogs with distemper.

In this article, comprehensive studies have been conducted on the effective use of natural pastures in conditions of vertical zonality in the project territory of Batyr Korday district (Zhambyl region). The data presented shows how important it is to comply with the norms and loads of pastures for further preservation of pasture yields and prevention of degradation. Consequently, there is a need to develop effective and scientifically-based systems of pasture turnover and the introduction of measures to restore pasture lands in the Zhambyl region, taking into account the peculiarities of the climate and geo-botanical indicators. Pasture lands make up about seventy percent of the entire territory of the Republic of Kazakhstan. The potential productivity of these lands reaches twenty-five and more million tons of fodder units. Pasture is the main renewable forage plant resource. It should be emphasized that haphazard use has led to the fact that land degradation processes occur on 27.5 million hectares of pastures, feed capacity decreases, biological diversity decreases, erosion processes manifest themselves, etc. All this requires the development of science-based approaches to the exploitation of pasture resources, compliance with the basic elements of rational grazing. The current situation may have a twofold path of development. The first way is the absence of strategic initiatives for the effective use of pastures for small producers will lead to a final reduction in the feed capacity of the pastures used. And the second way is small and large-scale use of the huge forage potential of the restored pastures.

The process of creating new forms is the key to choosing the combination of different textures for a unique aesthetic effect. Currently, various elements of the interior, including furniture and other decorative additions, are the basis for obtaining emotional balance, which is achieved between the functional purpose of the interior and its artistic and figurative concept. The main task in creating such objects is to create the most comfortable and harmonious atmosphere in the interior, regulating the mental processes of a person, which would cause exceptionally positive emotions and stimulate the creative development of users. The purpose is to consider the features of the use of epoxy resin in the design of interior objects and to study the importance of synthetic resins as a modern material for new ways of shaping in interior design and decoration. The methods used are: the use of formaldehyde resins as a modern, affordable, multifunctional material, the combination of resin with coloring and the use of various textures. Expansion of the range of interior elements in the manufacture of which epoxy resin is used. In this regard, it should be noted that the use of various resin compositions when creating design objects meets consumer requirements and complies with modern and latest trends. In this article, a brief study of such a polymeric material as epoxy resin was carried out. The properties of epoxy resin and how they affect the compositional solution, methods of its modification, and functional aspects of design from the point of view of manufacturing interior elements are described. The technologies for manufacturing modern products for decorative and applied purposes coated with epoxy resin are considered. In the process of researching technologies, a series of experiments are carried out to determine the structure of possible sequential actions, within which a technology will be studied and designed to ensure the safety of a new design product made of synthetic materials, then a constructive logic will be provided in which not only the functional properties of the object will not suffer, but also acquire valuable innovative value

Main problem: the development of a new direction in the food industry – the so-called functional nutrition, which means the use of such products of natural origin, which, when systematically used, have a regulatory effect on the body as a whole or on its specific systems and organs, has been widely recognized all over the world: immunostimulants, biocorrectors for blood pressure, cholesterol levels, etc. When creating functional dairy products, ingredients of plant origin are increasingly included in recipes, which are sources of dietary fiber, vitamins and microelements, organic acids and other biologically active compounds, which can also serve as flavor fillers. Purpose: to develop a technology for the preparation of a fermented milk product with the addition of an extract from gourds. To do this, it was necessary: to select the amount (dose) of the yoghurt starter introduced into the prepared milk, and also to investigate the effect of temperature on the fermentation process of the drink; to investigate the amount (dose) of the vegetable filler introduced into the mixture and its effect on the organoleptic characteristics of the drink; to investigate the organoleptic properties of the drink with the melon culture extract added to it before fermentation and after fermentation; to investigate the effect of vegetable filler on the fermentation process; to investigate the effect of the dose of vegetable filler on the process of acid formation; conduct microbiological studies of milk and vegetable yogurt; to investigate the change in the acidity of milk and vegetable yogurt during storage; to investigate the effect of the freezing process on the chemical composition and biological value of the extract. Methods: when performing the practical part of the work, physicochemical, organoleptic and microbiological studies were used. Results and their significance: in the course of the study, it was concluded that by adding an extract of gourds to the technology for the preparation of fermented milk products, a new fermented milk product can be obtained that meets all physicochemical, organoleptic and microbiological requirements. As a result, an original method for the production of a fermented milk drink containing an extract from a melon culture was developed.

The present stage of development of power systems is characterized by the need to increase their intelligence, that is, the formation of an environment capable of solving the problems of effective management of all components included in the power system. One of the features of modern energy systems is an active consumer, that is, a consumer who has the opportunity to optimize the schedule of loading their capacities, planning energy consumption, intellectualization of energy consumption. In addition to the fact that there are digital systems for collecting, processing and presenting information, as well as transmitting this information via the Internet, to solve the most difficult task of managing power systems, it is necessary to develop a large number of models adequate to real processes that can describe the processes taking place in the power system under consideration. The purpose is to develop models capable of adequately describing the interrelated processes occurring in the considered elements of the power system, as well as in the aggregate of related elements; development of methods that allow solving problems of effective control of elements of energy systems on the basis of the proposed intelligent models. To solve the problem of increasing the intelligence of the power system, nonlinear adaptive models of electrical complexes of an energy-intensive enterprise included in the power system were developed on the basis of balance equations and artificial intelligence methods. The production of alumina with the properties of inertia, nonlinearity and closure is chosen as the production under consideration. This type of production was chosen as the most difficult to predict due to the unpredictability of changes in energy consumption during the transition to other modes of its operation, associated, for example, with the receipt of raw materials with a different chemical composition for processing. Static and dynamic models of energy consumption of electrotechnical complexes with continuous inertial nonlinear closed production based on artificial intelligence methods have been developed, which makes it possible to eliminate the need to use long time series of retrospective data. For the considered type of continuous energy-intensive production, dynamic characteristics of energy consumption and technological processes are obtained from the main controlled parameters, which make it possible to predict emergency situations and partly man-made disasters. On the basis of a genetic algorithm, a multiparametric optimization problem of energy management of continuous production has been solved, taking into account technological parameters and cost factors.

The article is devoted to the development of technology for meat products of the "Halal" category. The authors consider the main problems of the meat industry in the field of the development of meat products of the "Halal" category in accordance with the National Program "Development of meat farming for 2018-2027", as well as the peculiarities of the production of meat products of the "Halal" category in Kazakhstan. A technology for the production of sausages for frying of the "Halal" category based on minced turkey and beef meat for functional nutrition has been developed, organoleptic, physico-chemical parameters of the new product have been studied. The mass fraction of protein is 8 %, the mass fraction of fat is 7 %. The authors of the article have developed a technological scheme for the production of a new product of the "Halal" category, which includes: acceptance of raw materials, cutting, deboning, veining, grinding to 2-3 mm of meat raw materials. At the next stage, meat is cooked at t 2-4 0C for 12 hours, minced meat is prepared (adding jerusalem artichoke 3 %, adding vitamin premix "Rovifarin" in an amount of 1.0 %, as well as spices and garlic according to the developed recipe). At the next stage, the minced meat is stuffed into natural shells with a diameter of (32-44) mm, cooled at t (4 + 2) 0C, stored at t (4 + 2) 0C for 36 hours. During the microstructural study of a sample of boiled and smoked sausage produced using traditional technology, it was found that the mass of the sample was formed from large fragments of muscle, fat and connective tissue (0.7-1.4) microns. The layout of the structural elements of the minced meat is dense, vacuoles and microcapillaries are rounded in shape, sometimes without clear boundaries, merged, with a size of (60-300) microns.

The article provides a comparative legal analysis of the constitutional statuses of the Presidents of the Republic of Kazakhstan (ROK) and the United States. The study was conducted according to the relevant provisions of the Constitution of the studied countries and according to the criteria: form of placement; form of government; presidential elections and powers; censorship established for presidential candidates, etc. The peculiarities of the legal status of the institution of the presidency of these countries were noted, including the following issues: participation in the formation of the upper house of the Parliament, ministries and other government bodies; interaction with the Parliament and judicial branches of the Government; powers in the field of defense and security; international relations; lawmaking, etc. Purpose: to reveal the content of the legal status of the President of the Republic of Kazakhstan, to reveal the doctrinal, specific, normative legal status of the head of state, to analyze the features of the President of the Republic of Kazakhstan, his normative and actual status. The article evaluates the constitutional and legal status of the President of Kazakhstan in relation to the administrative and legal status, analyzes the status positions of the ‘President’ as the head of the state and the highest official performing the functions of public administration in the context of constitutional foundations. Methodology: the methodological basis of the research as well as the work is based on a set of scientific methods of phenomena cognition: comparative Jurisprudence, the method of dogmatic analysis of legal acts, etc., which made it possible to identify the problems of the constitutional and legal status of the President of the Republic of Kazakhstan, to establish the fact of combining elements of the super-presidential form of the government. The results and their significance: therefore, based on the results of a comparison between the presidential institutions of the United States and Kazakhstan, the right to address the Parliament, the participation of the Senate in the appointment, approval, election of officials proposed by the President, the right of veto, the General Command of the Armed Forces, one person cannot be a president for more than two consecutive terms.