The development of the oil refinery is directly related to the peculiarities of the socioeconomic environment, which is determined largely by the favorable conditions of activity of all branches of economy of the Republic of Kazakhstan, a stable regulatory processes of all normative -legal framework of implementation of market reforms and efficiency of making management and innovative solutions in the oil refining industry of the Republic of Kazakhstan. Currently, a lot of efforts are being made to scale modernization of all production processes, as well as modernization of equipment of the oil refining complex of the country

The article presents information on the distribution of some species of ferns at the territory of the Nakhchivan Autonomous Republic. The authors note that 10 species of plants are summed in 4 families and 7 genera which belong to ferns. In Aspleniaceae Newm. family it can be found 4 species in two genera in Pteridaceae Reichenb. There are two species in one genus. Data about the area of distribution of these species and their significance are provided in the article.

The article presents the results of a study of personnel management system, conducted in a large coal mining company, which had revealed certain weaknesses in the organization of the management of personnel along with the lack of strategic quality planning. Additionally, there are recommendations made for the improvement of methods aimed at assessment of competitiveness of personnel.

The article is devoted to the changes in the normative legal base to optimize benefit system. On the basis of social assistance system research there revealed the reduction of recipients and children contingent growth in getting governmental social selective assistance, resulted from the growth of population income level and accumulation of deviation between the real subsistence level and statistically calculated for SASA payments.

The results of analysis of catches with stationary nets made from 2010 to 2012 in the North Absheron Gulf of the Caspian Sea have been presented. 26 species of fish belonging to 8 families (16 marine species, 10 migratory and semi-migratory species ) is registered in the catches. There are data distribution and abundance of each species for all of the families are summarized. The tendency of expansion of areals of marine species (Alosa braschnikowi kisselewitschi, A.b.sarensis) to the north is registered.

Relevance of the topic article is largely due to the role and value of the investment policy, which is a set of targeted activities conducted by the State to create favorable conditions for all facilities management for the purpose of recovery in investment. In this article the essence of investment policy, regional aspects of realization of investment policy and the main directions of its improvement is considered.

The article is devoted to modern technologies of organization the process of psychological and pedagogical support of upbringing children-orphans and children left without parental care, foster families. Particularly, basic approaches, criteria and stage-by-stage maintenance of organization of this process are exposed in the article. Analysis of the types of psycho-pedagogical support of orphans are given in this article: guardianship (trusteeship), foster family; also there are the main directions of psycho- educational support of children-orphans in the family. The stages of prevention and rehabilitation work on socio-pedagogical and psychological support are considered by authors. The basic conditions of organization of the socio-pedagogical support of children-orphans and children left without parental care in foster families are also defined in this article.

This article presents an analysis of psychological and educational literature on the adaptation of adolescents in general education schools for children with low social status. The author attached special importance to the work of school staff members, on the part of the state and private foundations, which help children and families with a low social status in Kazakhstan.

This article contains material about the features of working with pre-school children with attention deficit and hyperactivity disorder. Psycho-corrective effects will be effective if the psychologist cooperates closely with parents and teachers. The choice of methods for correcting ADHD should be individual in nature, taking into account the degree of manifestation of the main manifestations of the syndrome and the presence of concomitant violations. ADHD correction is possible with a variety of therapies, such as art therapy, neuropsychology, game therapy, music therapy, bibliotherapy, sand therapy. The syndrome of hyperactivity influences, first of all, on the development of the emotional sphere of the child of preschool age, which is expressed in an increased sense of anxiety, the occurrence of a large number of fears and other types of emotional disorders.

The purpose of the work is the creation of an information system that allows to carry out activity on accounting and keeping statistics on the means of measurement used in production. An analysis of the use of such a system at a number of large industrial enterprises is performed. The database and the program working with a database of means of measurement on required technological positions and maintenance are developed. The program provides graphs on the accumulated statistical data.

The article deals with the issues of social protection of the population in the Republic of Kazakhstan at the present stage, the appointment of special state benefits to the population, including state social assistance to families with children. In addition, a comparative analysis of the distribution of benefits by type and size of benefits to families with many children in the Republic of Kazakhstan and abroad.

The article deals with the issues of social protection of the population in the Republic of Kazakhstan at the present stage, the appointment of special state benefits to the population, including state social assistance to families with children. In addition, a comparative analysis of the distribution of benefits by type and size of benefits to families with many children in the Republic of Kazakhstan and abroad. Studying the current legislation

Non-governmental organizations cover a large part of the educational services market. Great demand for the educational services improvement and meeting the target groups’ special needs is calling for the regulating documents for NGOs to be developed. Regulating documents are to serve for the establishment of the consistent approach to the papers content and design, and to manage the independent education services quality evaluation routine.

This article describes the main directions of socio-economic development of Pavlodar region, provides characteristics and dynamics of the main areas and sectors of the region, including the state of industrial production, agriculture, development of small and medium-sized businesses, the labor market, trade, electricity, heat and water supply, construction. The region is characterized by a progressive and diversified economic structure. In the structure of industry of Pavlodar region the largest share is occupied by the manufacturing industry. The priority direction of development of the regional economy in the context of ensuring its socio-economic development is the development of small and medium-sized businesses

The article considers the concept of «learned helplessness» in relation to people with disabilities. One of the obstacles to the spread and coverage of a large number of people by inclusion is the inertia of people with disabilities themselves. Psychological living of constant helplessness, a sense of their otherness leads to changes in personal characteristics and the formation of a depressive state. In turn, this state affects all activities and all relationships. The article studies the features of helplessness, its structure and contains recommendations for overcoming the learned helplessness

On the basis of research on bacteriological indicators of the water supply system in the Ekibastuz region for the period 2016-2018 the 310 cases of detection of pathogenic microflora were identified. The chemical indicators are given the results of research to determine the content of toxic elements and heavy metals in the source and purified water, as well as in the distribution network of Ekibastuz. The largest number of pathogenic microflora cases and a high concentration of chemical elements are noted during the flood season. Sporadic pathogenic microflora and chemical elements are also recorded in the winter and summer periods.

This paper presents the results of the influence of ultrasonic treatment in the cofermentation of the cattle manure mixture (cattle) with the leaven from the rumen of ruminants on the process of biogas production. Anaerobic digestion was carried out in matinence periodic operation at the mesophilic temperature of 38 C ̊. As a substrate, a mixture with a content of 70 % cattle manure and 10 % leaven from rumen of ruminants was used. Treatment with ultrasound of the mixture was carried out at an intensity of 10 W/cm2 and an amount of input energy of 9350 kJ/kg of dry matter (DM), which completely eliminated the processes of stratification and sedimentation. Decomposition of organic matter (OM) in the periodic regime with the enzyme and ultrasound treatment occurred within 8 days, the usual substrate during this time OM decomposed 3.0 times less (only 14 %). The process of fermentation of methane in continuous and periodic modes treated with ultrasound, as at other temperatures, was stable, as can be judged by the values of volatile fatty acids (VFA) Volatile fatty acids (VFAs), alkalinity, pH, and biogas. The energetical efficiency of methane fermentation is estimated by comparing the volume of fuel (biogas) and heat consumption for technological needs. As shown by the comparison of efficiency of different regime, the largest amount of commercial energy in the form of biogas was obtained in the mode of joint fermentation of a mixture of cattle manure (cattle) with a ferment from the rumen of ruminants treated with ultrasound – 3 times more than without treatment (space).

Environmental protection measures are based, among other things, on the rationalization of the organization of the production waste management process. Population growth and the race to industrialize pose a serious threat to the ecosystem. Currently, the average global waste generation per capita is 494 kg / year. A large number of industrial enterprises operate on the territory of Kazakhstan. The range of manufactured products is very wide: household items, transport, building materials, equipment and much more. Each type of production is inevitably a source of a large amount of industrial waste, annually at the enterprises of Kazakhstan up to 600 million tons of waste are generated, three percent of which are recycled. On the territory of Pavlodar region there are enterprises in the field of metallurgy, mechanical engineering, chemical industry, construction industry enterprises, light industry, about a hundred in total. In this connection, the problem of treatment and disposal of industrial waste in Pavlodar region is very relevant. The article discusses the system of waste management in order to reduce their impact on the environment, activities for the disposal, transportation, disposal of waste, as well as their disposal at the industrial waste landfill in Pavlodar. The landfill in question is intended for the reception, temporary storage and disposal of non-hazardous solid industrial waste of the «green» level: waste and scrap of chromium, cadmium, aluminum, copper, lead, zinc, manganese, plastic waste, polyethylene, abrasive, rubber waste, ash and ash and slag waste; and also «amber»: waste containing mercury, arsenic, lead, waste batteries, phosphoric slags, waste oils, oil sludge. The scheme of organizing waste storage works is considered. The volume of accepted and recycled waste, as well as those placed at the landfill and used for their own needs, was analyzed, including construction waste, waste sleepers, ash and slag and abrasive scrap. The solution to the problem of industrial waste disposal is associated with the need for innovation and the introduction of new technologies and equipment.

Main problem: The genus Morbillivirus of the family Paramyxoviridae includes agents of morbilli, plague of cattle, carnivores and small ruminants. Plague agent of carnivores causes a dangerous disease of fur animals and dogs, which in many cases ends in death. The disease is widespread everywhere, including Kazakhstan. In our country, the mixed form of the disease is most common, and the least common is the skin and nervous forms. The chronic course of plague is observed to a greater extent with the nervous form, subacute - with mixed and intestinal, acute - with cutaneous and pulmonary forms of the disease. Goal: Veterinarians have significant difficulties in diagnosing carnivorous plague. Despite the fact that serological methods for diagnosing this infection have been developed and applied for research purposes, the lack of commercial diagnostic preparations on sale significantly restrains their use by practical veterinary workers. Therefore, the diagnosis of plague of carnivores is mainly established on the basis of the symptom complex of the disease and the data of epizootic and pathological anatomical studies, the results of which are largely similar to those in some other diseases of carnivores. Scientific research in the field of means and methods of laboratory diagnostics of carnivore plague, applicable in practical veterinary medicine, is in great demand. Methods: Considering the fact that the carnivores plague and cattle plague are antigenically closely related, studies were carried out to determine the possibility of using means and methods for diagnosing cattle plague for serological diagnosis of carnivores plague. Results and their significance: It has been established that the use of means and methods for diagnosing cattle plague makes it possible to diagnose carnivore plague at all stages of the course of the disease, their use makes it possible to reliably establish a diagnosis of the disease in fur-bearing animals and dogs in a short time after the receipt of samples of material for research, even in cases of mixed viral and bacterial infections; and also to differentiate the plague of carnivores from diseases similar to it - parvovirus enteritis, infectious hepatitis and a number of others.

Annotation Main problem:The main idea of this study is the development of proposals for improving the legislation of the Republic of Kazakhstan, as well as the regulatory framework of the Eurasian Economic Union, taking into account the experience of the EuropeanUnion countries (as the largest integration association), towards the further development of the legal framework for cooperation in the social-labor sphere, as well as improving the integration and migration policy of the Eurasian Economic Union countries in general, and the Republic of Kazakhstan, in particular. In addition, this study intends to develop practical recommendations aimed at improving the activities of the law enforcement agencies of the Republic of Kazakhstan, as well as the EAEU countries, in the field of combating illegal migration and forced labor on the territory of this integration association. Moreover, this project suggests the legal promotion of the results obtained, both on the territory of the EAEU and beyond. Purpose: The aim of the study. To develop proposals for improving the legislation of the Republic of Kazakhstan and the EAEU countries in the field of legal regulation of labour migration and counteracting its negative consequences such as illegal migration, forced labour in the territory of this integration association. Methods: The methodological basis of the study is made up of traditional general scientific and special legal methods used in comparative jurisprudence: system-structural, historical-legal, social-legal and comparative-legal. Results and their significance:All of the above testifies to the relevance and necessity of research in the framework of this study, since its implementation, taking into account the expected results, will further improve the regulatory framework in the field of combating illegal migration, human trafficking and other illegal manifestations resulting from insufficient regulation of the labour migration sphere.

Main problem: Small and medium-sized businesses, as an important component of modern production, largely contributes to maintaining a competitive tone in the economy, creates a natural social support for a social structure organized on the principles of the market, and also forms a new social stratum of entrepreneurs. Since the establishment of independent Kazakhstan, the sphere of entrepreneurship has always been in the center of attention of the state, and the Strategy "Kazakhstan - 2050": the new political course of the established state, comprehensive support of entrepreneurship as the leading force of the national economy has been identified among its priority tasks. At the present stage of development, the system of state support for small and medium- sized businesses in the Republic of Kazakhstan includes a number of institutions and state programs designed to provide comprehensive support to this sector of the economy. Despite the measures taken by the state to support small and medium-sized enterprises (SMEs), the development of this area in the regions and the Republic of Kazakhstan, in general, faces a number of serious problems, including those of a systemic nature, which involves researching the state, identifying problems and determining prospects for the development of small and medium- sized businesses. Purpose: to study the state, trends and prospects of development of SMEs in Pavlodar region, to identify and describe the problems of organizing the activities of entrepreneurs in the region. Methods: the state of entrepreneurial activity in the region is analyzed in the context of the main socially significant indicators of its development, the main trends and patterns of development of the SME sphere are identified and the reasons that form them are substantiated. As one of the tools for identifying and substantiating the reasons hindering the development of entrepreneurial activity, the study conducted a survey of entrepreneurs to identify the problems of SMEs in the region. Results and their significance: Based on the results of the study, a range of priority problems of SMEs in the region was determined, an assessment of their correlation with similar problems of the SME sector of the Republic of Kazakhstan was given, and a range of basic expectations of entrepreneurs in the context of government measures to support their development was outlined.

Main problem: Technogenic "metamorphosis" of vegetation near such large industrial facilities as Pavlodar is considered to be the result of various active chemical and mechanical factors provoked by economic activities associated with the influence of emissions from industrial companies. The effect of anthropogenic impacts on vegetation in all regions of Kazakhstan varies and is largely dependent on the economic development of the territory, but in any case, the end result of this impact is the change in the vegetation, causing violations of with structure, reduced vodorazdelnaya flora and productivity of communities. This, in turn, can cause infection of herbaceous plants with pathogenic fungi, which then carry with them: a decrease in the intensity of plant growth, a deterioration in their decorative qualities, a decrease in the survival of the biological species. Purpose: to study the types of fungi-pathogens of phytopathogenic diseases and to determine the degree of modification of the plant component, which is under intense negative technogenic influence from the Aksu Ferroalloy Plant (AFР). Мethods: For the experimental study, species of plants such as: Artemisia dracunculus L; Artemesia vulgaris L; Atriplex fera L; Atriplex patula L; Artemisia annua L were selected for the content of fungipathogens of phytopathogenic diseases. Results and their significance: This experimental study was aimed at the presence of fungi-pathogens of herbaceous plants as a result of human impact, occurring near the industrial zone "AFР". The composition of fungi-pathogens of herbaceous plants collected in this industrial zone was considered and studied. According to the results of an experimental laboratory study, phytopathogenic fungi of herbaceous plants belonging to 1 ordo, 1 familia, and 4 species were found.

Today, there is a full development of the food industry. It is characterized by the widest mechanization and automation of production and transport processes, the use of artificial cold and vacuum technology, the latest physical methods, chemical and biological preparations to accelerate technological processes. There are a huge variety of new products. New ways of long-term preservation of products in hermetic airtight packaging are promising. Now it is possible to deliver products from almost any industry to anywhere in the world. But the main problem for the modern consumer is that today's food industry is moving by leaps and bounds in the application and addition of chemical food additives: preservatives, flavors, dyes, stabilizers, antioxidants and substitutes for raw materials. To correctly answer the question of how to treat the use of food with food additives, it is necessary to understand and weigh the main disadvantages and advantages of using them. Advantages are that the product is better preserved, has an attractive appearance. Disadvantages are that the human body wears out, processing various chemicals, it is harmful to health. And with certain doses of use it becomes dangerous. Everyone has their own attitude to their health and their own priorities in life. Many people have come to terms with the daily use of products with additives, but others consciously refuse almost everything in the store. But the fact that no one wants to be poisoned from an overdose of various chemicals or starve to death. Therefore, the main advice is to carefully study the composition indicated on the label of food products and know the measure of their consumption. It is also impossible to believe blindly that the label was written with the truth. Manufacturers often use additives literally visually, which can lead to the production of a product with a dangerously higher concentration. It also happens that the manufacturer intentionally exceeds the norm in order to hide the shortcomings of the product (stale, poor quality of raw materials) and increase the yield of the finished product. The food additives added to many foods (usually designated by the code E) are predominantly harmful to the body. With moderate consumption, the use of products with E-supplements is not too harmful to the body (for example, several times a month). The situation is dangerous when a person consumes products with a large number of food additives daily or even several times a day when using various products. Nowadays, there are several hundred food additives with the code E (from E100 to E1521).

The article reveals the dynamics of grain production in the Republic of Kazakhstan, grain exports by countries. The author analyzes the grain market (sown area, yield, gross harvest). Kazakhstan has a significant potential for grain exports. Grain exports are important for the country's economy. The country is one of the six largest grain exporters in the world. This is due to the high milling properties of Kazakh grain, the quality indicators of Kazakh flour are highly valued in many countries of the world, which allows Kazakh wheat to be competitive in the world market and provide markets in various countries of the world. The main export destinations are Uzbekistan, Afghanistan and Tajikistan. The article analyzes the main trends in the development of the grain market and gives an assessment of the state.

Main problem: It is well known that the development of language in society, the development of speech, the formation of personality largely depends on the interaction of people. Therefore, they develop depending on the specifics of each nation and are one of the values that people have accumulated over the centuries. Comparison of human behavior with nature in English and Kazakh languages describes the spiritual life of each nation. It defines the national feelings, national behavior, national customs and traditions. Purpose: Comparative analysis of the values of the Kazakh and English peoples occupies a special place in the culture and language, the essence and content of which are indelible. This is a fount of cultural and historical life of the people, the spiritual value of the nation, such qualities as prudence and kindness. Methods: This article describes the ethnolinguistic foundations for comparing human character and nature in English and Kazakh. In cultural linguistics and cognitive linguistics, the concept of behavior is studied as an image of the world formed in the consciousness of an ethnic group. Based on the definition of the concept of behavior, the authors describe the manifestations of behavior in the national consciousness, the system of national thinking, beliefs, attitudes. It is noted that the formation of the behavior of unrelated Kazakhs and Englishmen depends on their geographic environment, nomadic lifestyle and behavior. Results and their significance: The phraseological units of the two languages used in this study clearly to show the characteristics of each nation. It is shown that forecasting natural phenomena for both peoples is closely related to their life, economy, occupation and plays an important role in people's lives.

The sharp deterioration of the environmental situation in the Republic of Kazakhstan, associated with human activity and the impact of harmful factors on the environment, affected the quality of food consumed by insufficient consumption of domestic fruit and vegetable products containing vitamins, minerals of an alkaline nature, carbohydrates, vegetable proteins, pectin substances and active fiber. The problem of improving the quality of growing and processing fruits and vegetables is one of the main tasks of the food independence of the Republic of Kazakhstan. Currently, the share of large vegetable farms in the Republic of Kazakhstan is only 10%. The volume of industrial processing of fruit and vegetable crops in Kazakhstan is insignificant. The demand for domestic fruit and vegetable products in the country is met only by 35-40%, most of it is imported from countries such as Russia, Kyrgyzstan, Uzbekistan and China. There is a need for the development of organic vegetable growing in Kazakhstan and the creation of new types of domestic fruit and vegetable products containing a sufficient amount of useful and active substances that can bind and remove toxic substances and radioactive elements from the human body. The purpose of the work is to improve the technology of fruit and vegetable semi-finished products with natural spicy and aromatic additives, to develop a multi-component recipe for vegetable mixtures and a method for producing quick-frozen vegetable mixtures with high quality indicators. These studies were aimed at studying the chemical composition and functional and technological properties of vegetables and spicy - aromatic plants for the content of biogenic compounds: carbohydrates, proteins, vitamins, essential oils, minerals and other substances. The structure of plant tissues was studied and the mass fraction of moisture, dry matter, fiber, mono - and disaccharides, pectin substances, vitamin C was determined, the formulation and production technology of Assorted vegetable mixtures were developed, and quality indicators were determined.

Currently, the problems of environmental safety are facing society. The industry develops every year. In this critical economic situation, the oil industry is a stimulant for the economic sector in Azerbaijan. The level of development of this industry is also relevant due to other reasons: sociological, technological and features of the economy of Azerbaijan. The production activity of oil processing, concentrating harmful substances and energy, is a source of man-made danger and pollution of the natural environment. The risk management process mainly consists of three stages - risk safety analysis, risk assessment, which is carried out in comparison of calculated and actual risk levels, the so-called acceptable risk levels and the adoption of appropriate regulations and management decisions. One of the factors that should be taken into account when assessing risk and safety is to determine the necessary costs. Since these costs are paid directly to the company, they try to minimize them as much as possible, which reduce the accuracy of risk assessment. One of the objectives of the study is to determine the optimal value of the necessary costs. It is established that the less reliable the method, the lower is the cost of its implementation. The methodological basis of the work was scientific works on these problems of scientists-economists, mathematicians on safety and risk assessment at industrial enterprises. When developing the presented methodology, computational algorithms developed by Dow Chemical were used. This company has collected a large volume of material on accident statistics, taking into account damages. Based on the obtained and experimentally verified data, a system of indices has been developed, an assessment of various indicators for qualitative and quantitative risk assessment of oil refineries. The analysis of the technogenic danger of oil refineries makes it possible to determine ecological and economic losses and choose rational possibilities of acceptable risk. The required costs, depending on the level of risk, are determined based on an increase in the accuracy of calculating the probability of occurrence of the cause of risks. The article examines the relationship between the expected level of risk and economic losses during oil refining in separate technological units, which allow determining the required level of risk and the expected economic damage.

Singularly perturbed partial differential equations with small parameters with higher derivatives deserve special attention, which often arise in a variety of applied problems and are used in describing mathematical models of diffusion processes, absorption taking into account small diffusion, filtration of liquids in porous media, chemical kinetics, chromatography, heat and mass transfer, hydrodynamics and many other fields. It is necessary to consider the creation of an asymptotic classification of solutions of singularly perturbed equations using a well-known approach to solving the boundary value problem. In this case, the singular problem is understood as the problem of constructing the asymptotics of the solution of the Cauchy problem for a system of ordinary differential equations with a small parameter with a large derivative. The asymptotics of the solution in all cases is based on the last time interval or the construction of a boundary value problem for a system with a weak clot in an asymptotically large time interval. Purpose - to construct and substantiate the asymptotics of solving a singular initial problem for a system of two nonlinear ordinary differential equations with a small parameter; To date, a number of methods have been developed for constructing asymptotic expansions of solutions to various problems. This is the method of boundary functions developed in the works of A.B. Vasilyeva, M.I. Vishik, L.A. Lusternik, V.F. Butuzov; the regularization method of S. A. Lomov, methods of averaging, VKB, splicing of asymptotic decompositions of A.M. Ilyin and others. All the above methods allow us to obtain asymptotic expansions of solutions for wide classes of equations. At the same time, such singularly perturbed problems often arise, to which ready-made methods are not applicable or do not allow to obtain an effective result. Therefore, the development of methods for solving equations remains a very urgent problem. As a result of the study, an algorithm for constructing an asymptotic classification of the initial solution of the problem with a singular perturbation is given, and approaches to estimating the residual term are also shown.

The article is devoted to the development of a technology for obtaining organic fertilizers from poultry waste based on biocatalytic processes. Currently, many poultry farms have become sources of environmental pollution, thereby causing serious environmental problems and economic and social damage. The problem of reliable protection of the natural environment from pollution by bird droppings is currently relevant. In the area of operation of large poultry farms, air pollution by microorganisms, dust, foul-smelling organic compounds, which are decomposition products of organic waste, as well as nitrogen, sulfur, and carbon oxides, is possible. Bird droppings contain acids, nitrogen, phosphorus and potassium, heavy metals. The content of nitrogen, phosphorus and potassium changes dramatically depending on the quantity and quality of the feed. Humic substances isolated from brown coal have a sufficiently high sorption activity and are used as cheap sorbents for solving a number of environmental problems in industry. These studies are aimed at minimizing the main disadvantage of the anaerobic digestion process, the low reaction rate, which leads to the need to create large-volume bioreactors. On the basis of the research carried out, a technology has been developed for obtaining organic fertilizers from poultry waste by the method of anaerobic fermentation of chicken manure with humidity at a temperature of 27 °C - 50 °C with the addition of sodium humate. The resulting fertilizer is intended for use in agricultural production, horticulture, floriculture, forestry, municipalities, in household plots in order to increase the yield and quality of crop production. For the developed technology, an application has been submitted for obtaining a Patent for the invention of the Republic of Kazakhstan «Method for producing organic fertilizers» (priority No. 2021-22818, dated July 13, 2021). The invention allows to significantly reduce the time of fermentation, to enrich the product with organic and mineral products contained in sodium humate, to convert the salts of heavy metals into an insoluble state, to improve the environmental friendliness of the method.

The development of extraction techniques of medical plants aims to maximize the bioactive compounds production. Тechnologies in this area of industry have not high enough еfficiency factor. In some cases, it reaches only 40-50 %. Therefore, development of new methods to effectively extract different compounds from plant material and their input into large-scale industry is of great importance. The goal is to determine an effective and suitable technology for extracting bioactive compounds from medical plant. This is a narrative review paper which focuses on different extraction methods of medical plant. To find relevant articles for this narrative review, 73 articles were reviewed. Of these, 14 irrelevant documents were discarded. This review analyses various extraction processes to guide the selection of suitable methods for various types of medical plants and applications. This is done by outlining traditional and modern methods of extraction techniques, exploring the importance of solvents for extraction, and comparing novel and alternative methods of extraction. In conclusion, based on the current knowledge, solvent extraction is the most common method for medical plants extraction. Enzymatic hydrolysis and supercritical extraction are advanced techniques with high yield of compounds. However, more research is needed for some modern extraction methods.

The article examines in detail the role of the concept of al-muhalafa in making judgments from religious texts and other legal grounds. In addition, a comparative analysis of the legal and linguistic principles and features of the Hanafi and Mutakallim schools of Islamic law, as well as issues of disagreement between the two movements, will be considered. There is much debate among scholars as to whether Mafhum al-Muqhalafa is accepted as evidence. Even Abdul Aziz Bukhari said: "This issue occupies a large place in the science of jurisprudence," he said. That is, below we answer the question of how much influence the evidence from this principle has on the verdict and whether these sentences are legitimate. The principle of Mafhum al-Mukhalafa is not accepted as evidence in the Hanafi Madhhab, and the ruling resulting from it is invalid. This is because the concept of al-muhalaf is to render a verdict that contradicts the verdict in the text (Amidi), confirming a verdict that is not in the text, that is, according to Abu Hanifa, the verdict in the text and the verdict that does not appear in the text are not equal. However, in schools other than Hanafi schools, this principle fully applies. The authors used the method of comparative analysis of the Quran and the Sunnah of the Prophet, which are the basis of Islam, to prove your point Some scholars of the Hanafi Madhhab do not completely refute this principle. It is unacceptable to judge by this principle only by Sharia texts, but in everyday life, in communication with people, the concept of al-muhalaf is accepted as proof. Ibn al-Humam reports that the Hanafis do not recognize the concept of al-muhalyaf as proof only in Sharia texts. Therefore, scientists are divided into two main groups regarding the application of this principle as evidence, and each group has its own strong arguments, which are discussed in detail in the second part of the article.

Main problem: One of the most complicated types of marketing is marketing of medical services or organizations. This can be attributed to many reasons. First of all, person’s life and health is the most important value. One more reason is that budget funds are limited, this forces us to look for extra-budgetary financing sources. At the same time, it follows that the population of the Republic of Kazakhstan, receiving free assistance for a long time, refuse paid medicine, the solvency of a large percentage of the population. Thus, marketing research of the services market is designed to identify the real market share of trade and paid medicine, to fill the need of the qualified medical care, to identify the particularity of demand in various segments and the demographic and psychographic characteristics of the population groups. Purpose: to identify current trends and develop marketing strategies in the regional market of medical services, allowing to identify and strengthen the economic foundations of the functioning of non-profit organizations in the national market. Methods: The research was conducted using traditional methods of marketing research: qualitative: in-depth interview, focus groups; quantitative: survey, as well as methods of economic analysis: comparative, graphical and scenario planning. Results and their significance: the essence of marketing in healthcare is considered, the features of marketing research are taken into account; the medical services market of Pavlodar region is analyzed and evaluated and ways of its improvement are proposed. The results of the study may be useful for the development of measures to further improve the activities of medical organizations in the Republic of Kazakhstan.

Main problem: Today electronic information is one of the important resources in the management system. Electronic information resources are not only means, but also control flows. For example, any instruction or instruction in the management system is actually a guide to action. At the same time, for example, data on the movement of an object (employees, goods, money, etc.) are information resources, the storage and accounting of which is the basis of the organizational process. Large flows of information require their structuring, and operations on them become time-consuming. One of the ways to solve this problem is the development and implementation of an information system. Purpose: To analyze and design an information system using specialized tools designed to optimize the implementation of the above stages of software system development, using the example of a real business process. Methods: The article discusses the methodologies of CASE tools designed to automate software development processes, namely, the first two stages of the life cycle: analysis and design of a software product. The analysis and design of the business process functionality is carried out using the IDEF0 functional modeling methodology. The design of the database structure of the information system was carried out using the methodology of semantic (information) modeling IDEF1X. Description of the scenario of the designed software for a real business process is carried out using the dynamic modeling methodology IDEF3. Results and their significance: The article substantiates the relevance of the use of modern CASE-technologies in the process of analyzing and designing a future information system, as well as for the purpose of possible optimization on the example of a real business process "Inventory accounting". As a result, a comprehensive business process model was built using tools based on CASE-methodologies. The resulting model, as well as the description of its construction, is a clear example of the use of CASE technologies for software developers, as well as system analysts and IT specialists.

The article presents a method of teaching object-oriented programming to students of the educational program «Computer Engineering and software» using the project method. The problem of the insufficient level of organization of the educational process in colleges, aimed at studying any kind of object programming, is investigated. In this regard, the important aspects that must be taken into account when constructing a methodology for teaching object-oriented programming, aimed at enhancing the cognitive independence of students, are described in detail. It is shown that the solution to this problem largely depends on the degree of achievement of the learning goals of students specified in GOSTiPO, as well as on the methodological guide to object-oriented programming, developed in accordance with the requirements of modern education. An analysis was made of the State Compulsory Standard for Technical and Vocational Education of the Republic of Kazakhstan, the Model Curriculum and the Working Curriculum in the discipline "Fundamentals of Object-Oriented Programming" for students of the educational program "Computer Engineering and Software" and the teaching methodology developed on their basis. The purpose is to substantiate the methodology for teaching students object-oriented programming, which activates cognitive activity through the use of the project method and its practical application in the educational process. Methods: The methods of analysis, synthesis and deduction were used in the article. Results and their significance: The practical result of the analysis was the method of teaching college students object-oriented programming, using the project method, which is necessary for a more intensive development of cognitive independence. The practical significance of the results is to increase the efficiency of studying the discipline by taking into account the individual characteristics of students.

Main problem: In modern science, there are a large number of techniques focused on the assessment of competitiveness through the analysis of certain resources in the region. However, accounting of human resources in such assessments is not used as a prior factor in identifying regional competitive advantages. Competitive advantages affect not only the efficiency of individual sectors of the economy but also the overall social and economic development of the country. Evaluation of the competitiveness of the region should include one of the main parameters of the human resource and economic development level. Therefore, the forecast for the competitiveness of the region should take into account the pace of human resources development. Purpose of the research is evaluation of regions’ competitiveness as the main parameter of economic development in current conditions. Methods: The methods used in Kazakhstan for assessing the competitiveness of a region considers only the assessment of human resources in its structure but do not take into account the level of their development over time, as well as the multi-factorial nature of their components. Results and their value: The work explains and analyzes rating model for assessing of the competitiveness of the regions of Kazakhstan (the National Chamber of Entrepreneurs of the Republic of Kazakhstan). The authors proposed a methodology for ranking the regions of Kazakhstan based on an assessment of the development of their human resources that affect the competitiveness of the region. It includes an analysis of demographic, labor and social and economic indicators reflecting the state of human resources.

Main problem: It is very important for each company to obtain an industrial certificate, which makes it possible to get into the Register of Domestic Manufacturers, as they expect to receive large orders. With the receipt of an industrial certificate, their prospects for participation in various tenders and purchases will significantly increase, where they can show their abilities, compete with domestic producers, and also have an advantage over importers. Since July 1, 2019, the industrial certificate has become mandatory for participation in public procurement. Corresponding changes to the rules for public procurement were made by the Ministry of Finance of the Republic of Kazakhstan. Taking into account the experience of the «Rules for determining the country of origin of goods, issuing a certificate of origin of goods and canceling its validity», approved by Order of the Acting Minister for Investment and Development of the Republic of Kazakhstan dated February 24, 2015. No. 155», it becomes clear that the document does not take into account a number of «narrow» specifics of individual industries. Purpose: development of amendments and additions to the «Rules for the formation and maintenance of the register of domestic producers of goods, works and services, as well as the issuance of an Industrial Certificate» for the subsequent possibility of obtaining an Industrial Certificate by a chemical industry enterprise for the production of mineral fertilizers. Methods: study and analysis of literary sources, statistics and modeling of the procedure for issuing an Industrial Certificate. Results and their significance: the problems of application were studied, ways to solve these problems were found, and amendments and additions to the “Rules for the formation and maintenance of the register of domestic producers of goods, works and services, as well as the issuance of an industrial certificate” were developed. At the moment, the Rules need to be carefully finalized. It is necessary to consider this issue together with authorized state bodies, associations and business representatives, since obtaining an Industrial Certificate will directly affect participation in public procurement, and, accordingly, the economy of the Republic of Kazakhstan.

The concept of resilience, the ability to withstand crises and adversities and recover from them, has valuable potential for research, intervention and preventive approaches aimed at strengthening the family. There are many paths to relationship resilience, varying depending on different forms of family, psychosocial problems, resources and constraints. Shared beliefs that promote alignment and cooperation are vital to overcoming adversity. Measures to increase the resilience of families are of timely importance to overcome the rapid social changes and uncertainties that families face today. According to research by sociologists and family consultants, each family goes through several stages of development, and the transition from one to another is usually accompanied by a crisis. It is generally believed that domestic difficulties lead to complications in family life, first of all. The purpose is to identify the types of problems and causes leading to crisis situations in marriage. In this regard, the methods such as analysis of literary sources on this topic, generalization, synthesis, psychological experiment, diagnosis of the psychology of family crisis by H.I. Olioirovia, T.A. Zinkevii-Kuzemkin, T.F. Velenta were used. The authors of the article come to the conclusion that stress is a part of life, and the slings and arrows of misfortune hit all families throughout their lives. The concept of family resilience confirms the reparative potential of all families and offers a valuable basis for research and clinical practice. Just as families face a variety of challenges, there are many ways to increase family resilience. By understanding key processes, clinicians can mobilize untapped resources, allowing families in distress to cope with difficulties more effectively and recover through their mutual support and cooperation. Therefore, it is necessary to understand the patterns of crisis situations and the socio-psychological causes of their occurrence.

In modern science, there are a large number of techniques focused on the assessment of competitiveness through the analysis of certain resources in the region. However, accounting of human resources in such assessments is not used as a prior factor in identifying regional competitive advantages. Competitive advantages affect not only the efficiency of individual sectors of the economy but also the overall social and economic development of the country. Evaluation of the competitiveness of the region should include one of the main parameters of the human resource and economic development level. Therefore, the forecast for the competitiveness of the region should take into account the pace of human resources development. The purpose of the research is evaluation of regions’ competitiveness as the main parameter of economic development in current conditions. The methods used in Kazakhstan for assessing the competitiveness of a region considers only the assessment of human resources in its structure but do not take into account the level of their development over time, as well as the multi-factorial nature of their components. The work explains and analyzes rating model for assessing of the competitiveness of the regions of Kazakhstan (the National Chamber of Entrepreneurs of the Republic of Kazakhstan). The authors propose a methodology for ranking the regions of Kazakhstan based on an assessment of the development of their human resources that affect the competitiveness of the region. It includes an analysis of demographic, labor and social and economic indicators reflecting the state of human resources.

Main problem: for the 2019-2021 years of the implementation of the state program, the indicator for the number of incoming visitors in the tourism sector of the region was achieved in 2019. In 2020-2021, the indicator was not reached due to the global pandemic associated with the spread of coronavirus infection by Covid-19, and therefore the attractiveness and profitability of tourism in Kazakhstan decreased. Tourism and the increasing demand for tourism services every year are becoming a source of large incomes and profits in many countries. According to the World Travel and Tourism Council (WTTC), travel and tourism is currently the largest industry in the world, taking into account the contribution to global GDP and employment. [1] The conclusions made in this paper and practical recommendations can contribute to the development of measures to improve the process of effective management and reform of the tourism industry. The purpose: to study the theoretical and practical aspects of the development of the tourism industry in the Pavlodar region. Methods: in the course of the research, the following methods were used: theoretical analysis of literature, methods of ranking, analysis, grouping and systematization of data, statistical methods. Results and their value: currently, the tourism industry of both Kazakhstan and its regions is gradually beginning to develop. The article presents the result of assessing the attractiveness of the tourism market and shows ways to expand the industry, as well as reveals the specifics of management in the tourism sector. The formulated conclusions and practical recommendations can contribute to the development of measures to improve the process of effective management and reform of the tourism industry of Pavlodar region, as well as the development of a mechanism for using tourism potential in the socio-economic development of Kazakhstan. This study is relevant, since the main task for today is the need to study the problems and challenges in the field of tourism development, which will contribute to the development of other related industries in the Republic of Kazakhstan. The development and solution of the problems of the tourism industry itself will undoubtedly lead to an increase in the opportunities of this market and the demand for services and, as a result, will affect the development of economic indicators of both regions and the whole of Kazakhstan.

Main problem: recently, much attention has been paid to energy saving in production, especially when it comes to industrial units that burn fuel. There are several ways to maximize the use of the heat released during the combustion process, for example, to reduce the temperature of the flue gases at the outlet of the unit, by maximizing its use, both in the technological process itself and by installing additional heat-receiving units, for example, air heaters or other heaters. Another way to save money is to reduce heat losses through the lining of these high-temperature units. Metallurgical units that consume a large amount of energy and fuel require an analysis of their consumption, and ways to save their consumption based on the results of the analysis. Purpose: this article considers the possibility of replacing the existing inner insulation layer of the second and third sections of a high-temperature unit - a metallurgical furnace, with a new one with better technical and economic indicators. Methods: the possibility of replacing the existing inner insulation layer of the second and third sections of the high-temperature unit with a new one, with the best technical and economic indicators, was considered. The calculation of heat losses by thermal conductivity through the side surfaces and the roof with new insulation was performed, and the economic efficiency of the proposed solution was proved. Results and their significance: replacing the existing inner layer of insulation - refractory concrete PHLOCAST M30 (thermal conductivity coefficient from 1,4 to 1,45) with the proposed CERALIT GUN HK 70070 (thermal conductivity coefficient from 1,03 to 1,12) will reduce heat loss to the environment, and thus to reduce fuel consumption for the furnace.

In this article, comprehensive studies have been conducted on the effective use of natural pastures in conditions of vertical zonality in the project territory of Batyr Korday district (Zhambyl region). The data presented shows how important it is to comply with the norms and loads of pastures for further preservation of pasture yields and prevention of degradation. Consequently, there is a need to develop effective and scientifically-based systems of pasture turnover and the introduction of measures to restore pasture lands in the Zhambyl region, taking into account the peculiarities of the climate and geo-botanical indicators. Pasture lands make up about seventy percent of the entire territory of the Republic of Kazakhstan. The potential productivity of these lands reaches twenty-five and more million tons of fodder units. Pasture is the main renewable forage plant resource. It should be emphasized that haphazard use has led to the fact that land degradation processes occur on 27.5 million hectares of pastures, feed capacity decreases, biological diversity decreases, erosion processes manifest themselves, etc. All this requires the development of science-based approaches to the exploitation of pasture resources, compliance with the basic elements of rational grazing. The current situation may have a twofold path of development. The first way is the absence of strategic initiatives for the effective use of pastures for small producers will lead to a final reduction in the feed capacity of the pastures used. And the second way is small and large-scale use of the huge forage potential of the restored pastures.

The present stage of development of power systems is characterized by the need to increase their intelligence, that is, the formation of an environment capable of solving the problems of effective management of all components included in the power system. One of the features of modern energy systems is an active consumer, that is, a consumer who has the opportunity to optimize the schedule of loading their capacities, planning energy consumption, intellectualization of energy consumption. In addition to the fact that there are digital systems for collecting, processing and presenting information, as well as transmitting this information via the Internet, to solve the most difficult task of managing power systems, it is necessary to develop a large number of models adequate to real processes that can describe the processes taking place in the power system under consideration. The purpose is to develop models capable of adequately describing the interrelated processes occurring in the considered elements of the power system, as well as in the aggregate of related elements; development of methods that allow solving problems of effective control of elements of energy systems on the basis of the proposed intelligent models. To solve the problem of increasing the intelligence of the power system, nonlinear adaptive models of electrical complexes of an energy-intensive enterprise included in the power system were developed on the basis of balance equations and artificial intelligence methods. The production of alumina with the properties of inertia, nonlinearity and closure is chosen as the production under consideration. This type of production was chosen as the most difficult to predict due to the unpredictability of changes in energy consumption during the transition to other modes of its operation, associated, for example, with the receipt of raw materials with a different chemical composition for processing. Static and dynamic models of energy consumption of electrotechnical complexes with continuous inertial nonlinear closed production based on artificial intelligence methods have been developed, which makes it possible to eliminate the need to use long time series of retrospective data. For the considered type of continuous energy-intensive production, dynamic characteristics of energy consumption and technological processes are obtained from the main controlled parameters, which make it possible to predict emergency situations and partly man-made disasters. On the basis of a genetic algorithm, a multiparametric optimization problem of energy management of continuous production has been solved, taking into account technological parameters and cost factors.

Increasing the yield of sunflower is inextricably linked with the evaluation of newly created interline hybrids and their components (parental forms) using various methods for assessing their combination ability (CА). Breeding research in this direction includes large material and practical costs when using the developed methods for assessing combination ability (CА) due to its small analytical capabilities. New approaches to the analysis of the productivity of hybrids in practical studies can significantly increase the volume of the analyzed material and evaluate not only for a short period of testing, but also for a long period of time over the years. Purpose is determination of the combination ability of parental forms of sunflower interlinear hybrids to optimize the breeding process. When analyzing the determination of the combination ability of the parental components of sunflower interlinear hybrids, the method of evaluating the CА according to a special scale developed at VNIIMK (Krasnodar, Russia) was used. This method makes it possible to analyze a large number of hybrid combinations and their parental forms and draw appropriate conclusions for further use in the breeding process. The analysis of the obtained results makes it possible to fully evaluate the obtained interline hybrid combinations by years of testing. We analyzed 1736 hybrid combinations involving 212 maternal forms and 1472 combinations involving 209 paternal pollen fertility restorer lines. 75 maternal lines with a high total combination ability (GCА) and 97 paternal forms with this trait were identified. Maternal lines with high combinational ability VKU 110 A, VKU 140 A and SV 55 A are of interest for use in practical breeding. Among the paternal forms are SV 123 V, VKU 400 V and VKU 401 V. The components of hybrid combinations with high specific combination ability (SCА) have been determined. These are lines VKU 414 A, VKU 413 A, SV 31 Rf, SP 1459. Hybrids with high adaptive properties have been identified when growing conditions change, which will make it possible to purposefully conduct practical breeding to maintain high productivity of sunflower hybrids

Market transformations in the Republic of Kazakhstan and in the regions have entered a phase of intensification: management systems and resource allocation have been fully improved, the institution of public-private property has been formed, the main market mechanisms of economic regulation have been put into effect. The mechanism of self-development of the market as a whole is gradually being launched, small business is becoming crucial. It is free entrepreneurship that is designed to intensify the further economic recovery in the regions of the Republic of Kazakhstan. Balanced and progressive development of small business involves the development of infrastructure that stimulates the activity of its development and requires the transformation of the mechanisms and format of integration of the sphere of small and large business, as one of the fundamental factors of balanced development of small business in the leading sectors of the economy. In the Republic of Kazakhstan, the support of the small business sector is one of the strategic priorities of its development. However, despite the measures taken by the state to provide support to small businesses, the dynamics of needs and industry-specific features of the development of the market of goods and services make their own adjustments to regional trends in the development of small business, forming an industry and structural imbalance in the development of small business, which requires consideration and clarification of their content. Purpose is to study the state and trends of small business development as a factor affecting the efficiency of the economy and social stability of the population. The analysis of small business development in the article is implemented on the basis of the information and statistical base of the Republic of Kazakhstan in the context of identifying trends and patterns of its development; identification, generalization and justification of the reasons for their formative and institutional approaches to their regulation. In particular, the analysis in the study is based on the materials of statistical reviews and their analysis using methods of grouping, generalization, logical analysis, system description and interpretation. The range of main directions and trends in the development of small entrepreneurship in the Republic of Kazakhstan has been studied and determined, their effectiveness has been assessed and tools to support the balanced development of small business have been proposed.

Main problem: the globalization of the information sphere has led to a significant increase in the volume of stored and processed information. To increase the processing speed and provide information to the recipient, it is logical to increase the power of the equipment on which the information is processed. But such a path also leads to an increase in financial costs for continuous modernization or complete updating of computer equipment and application software. Purpose: an alternative solution to increasing the capacity of hardware and software may be to optimize the process of organizing data storage, and already at the stage of information analysis. At the initial stages of the task, a huge amount of information is collected and processed, which needs to be classified, to identify essential and non-essential information flows for the information system being developed, etc. The quality of functioning of the developed information system as a whole and its individual modules in particular will depend on how correctly and fully the structuring and systematization of data will be carried out. Methods: modern methodologies of conceptual design of information systems shift the emphasis from software implementation to analysis and modeling of the production environment. The tools used in the process of conceptual modeling allow you to automate the main part of the processes, including the development of program code in the format of templates (patterns), including the preparation of documentation for the software product being developed. Since modern methodologies and tools are based on the use of powerful graphical tools, this significantly increases the visibility and simplifies the process of making adjustments to the information system project, actually using the "Drag-and-Drop" technology. This allows you to redistribute the time spent on the implementation of the first stages of information system development, allocating more time to the analysis and design of the software environment at an abstract, conceptual level. Results and their significance: the stages of analysis and design do not require large financial costs and are more variable. Information at these stages is easier to adjust and change than, for example, at the stage of writing program code. In addition, it is at these stages that the most active interaction between the developer and the customer is carried out, where maximum visibility and variability of the project of the future information system is required. And the use of modern software design methodologies significantly increases the efficiency of the first stages of information system design.

Main problem: Monitoring the reliability of the foundation of roads, buildings and engineering structures is an important aspect of geophysical research. Modeling of geological heterogeneities is relevant. Moreover, the use of computer modeling in this problem is associated with computational costs. Purpose: Analysis of the vertical electrical sounding (VES) method for modeling the physical properties of soil and their changes when exposed to elastic vibrations. Methods: To achieve the goal, the vertical electrical sounding (VES) method was used, using a one-dimensional model of the geological environment. The direct VES problem was solved by calculating the Hankel integral. Results and their significance: The study made it possible to model a large number of soil layers using the VES method. The results obtained make it possible to determine the parameters of detected objects and changes in the characteristics of the controlled environment when exposed to elastic vibrations. The significance of the results lies in the possibility of improving the method for modeling the physical properties of soil and taking into account their changes under the influence of elastic vibrations, which helps to increase the efficiency and accuracy of monitoring the reliability of the foundation.

The article is devoted to the development of technology for meat products of the "Halal" category. The authors consider the main problems of the meat industry in the field of the development of meat products of the "Halal" category in accordance with the National Program "Development of meat farming for 2018-2027", as well as the peculiarities of the production of meat products of the "Halal" category in Kazakhstan. A technology for the production of sausages for frying of the "Halal" category based on minced turkey and beef meat for functional nutrition has been developed, organoleptic, physico-chemical parameters of the new product have been studied. The mass fraction of protein is 8 %, the mass fraction of fat is 7 %. The authors of the article have developed a technological scheme for the production of a new product of the "Halal" category, which includes: acceptance of raw materials, cutting, deboning, veining, grinding to 2-3 mm of meat raw materials. At the next stage, meat is cooked at t 2-4 0C for 12 hours, minced meat is prepared (adding jerusalem artichoke 3 %, adding vitamin premix "Rovifarin" in an amount of 1.0 %, as well as spices and garlic according to the developed recipe). At the next stage, the minced meat is stuffed into natural shells with a diameter of (32-44) mm, cooled at t (4 + 2) 0C, stored at t (4 + 2) 0C for 36 hours. During the microstructural study of a sample of boiled and smoked sausage produced using traditional technology, it was found that the mass of the sample was formed from large fragments of muscle, fat and connective tissue (0.7-1.4) microns. The layout of the structural elements of the minced meat is dense, vacuoles and microcapillaries are rounded in shape, sometimes without clear boundaries, merged, with a size of (60-300) microns.

The development, grovth and productivity of livestock depend primarily on providing it with a variety of nutritious feeds. Daily feeds should consist of microbiologically synthesized protein, as well as a variety of seeds, mineral and vitamin supplements of animal and vegetable origin. Indeed, the maximum disclosure of the genetic potential of livestock largely depends on both the quantity and quality of feed. One of the stages of feed quality assessment is the measurement of their chemical composition. The chemical composition is not always constant and depends on many factors, including the species composition of plants, fertilizer application rates, climatic conditions and storage methods. The least accumulation of moisture in the soil was observed in areas where pasture grasses were regularly treated with wormwood. Pacture productivity was also the lowest in the control plots, where the average phyto-chemical composition over three years showed that the dynamics of protein content was the same in all pastures – the protein content reached a maximum at the beginning of the growing sea son and decreased from spring to autumn, while the lowest content of crude protein during harvesting in summer was in control plants of varieties

Main problem: At the present stage of life, Innovations in the financial sector contribute to the optimization of financial intermediation and, in turn, stimulate economic growth. Financial innovations increase the efficiency of the allocation of savings capital to investment capital, as well as increase liquidity in the markets. As the digital economy has developed, the functionality of traditional large financial institutions has been partially replaced by financial technologies (FinTech). FinTech involves the convergence of traditional financial services with mobile services, social media services, big data aggregation and processing, and cloud technologies. Purpose of this article is to identify the main directions of the electronic financial services market in the Republic of Kazakhstan, identify the main problems and prospects for the development of the financial sector of the economy. Methods: The work used general scientific methods of comparative system, vertical and horizontal analysis, structural and functional method, analytical techniques, economic and statistical research methods. The results and their significance: the authors identified the main directions of digitalization of the financial sector of the modern economy, noted the role of FinTech companies and services in both theoretical and practical terms, and provided relevant approaches to the definition of this concept in the economic literature. The main reasons and factors for the development of this direction of digitalization of the financial sector are substantiated, including the concept of financial accessibility, the advantages and disadvantages of FinTech, various approaches to their classification, country and regional characteristics, and an analysis of development trends. The crowdfunding direction of FinTech is noted, approaches to its definition and classification are given, the advantages of the crowdfunding mechanism are revealed, and its role in the modern economy is analyzed. The trend of algorithmic trading development as the most important direction of digitalization of the financial sector is investigated. A detailed analysis of mobile financial services as one of the fastest-growing areas of FinTech is carried out, approaches to their classification are given, factors stimulating the growth of mobile payments, country and regional characteristics are substantiated. The main directions of digitalization of the insurance sector are analyzed, reasonable conclusions about the advantages of InsurTech are made.