The article describes in detail the civil proceedings, the General characteristics of the participants of the process, the classification of persons involved in the case, the order of their participation in the proceedings, as well as their rights and obligations. Civil procedure is a system of legal norms regulating civil procedural actions and legal relations formed between the court and other participants of the process in the administration of justice in civil cases. The main purpose of this production is restoration of the violated right and protection o f interests protected by the law. Procedural actions shall be carried out in accordance with the procedure and strict procedure established by law. On the basis of the procedure established by law at all stages of the process, civil procedural relations arise, develop and cease.

The development of the oil refinery is directly related to the peculiarities of the socioeconomic environment, which is determined largely by the favorable conditions of activity of all branches of economy of the Republic of Kazakhstan, a stable regulatory processes of all normative -legal framework of implementation of market reforms and efficiency of making management and innovative solutions in the oil refining industry of the Republic of Kazakhstan. Currently, a lot of efforts are being made to scale modernization of all production processes, as well as modernization of equipment of the oil refining complex of the country

he article presents the scientific rationale for a promising trend - a product with a high protein content, enriched with functional ingredients for specialized (herodietic) nutrition. Based on the results of our own research, we determined the component composition of the fermented product and the main dairy raw material - buttermilk, characterized by high biological value. The new product contains an antioxidant complex and a herbal ingredient that expands the product range.

In the article the results of an analytical assessment of economic capacity of Pavlodar city are considered. Determination of internal reserves of socio-economic development of the region currently becomes an important task solution of which requires development of new approaches to definition of essence, structures, methods of an assessment of social and economic potential. The size of social and economic capacity of the region characterizes a level of development of productive forces, defines competitiveness and extent of capitalization of the enterprises.

The article consideres foreign experience of the state support of agricultural production. The authors analysed innovative processes (use of bioresources), occurring in the agrarian and industrial complex and defined the main directions of financial support in agriculture area.

The article presents the results of analysis of the model quality «career development» and its impact on the quality of products in terms of production pipe rolling PB LLP «KSP Steel».There are defined the main factors affecting the quality of career development of the employee. A new model improving the «quality of life» is suggested.

The article describes intensification methods of the anaerobic digestion process, contributed to the enhancement of biogas installations productivity. Microbiological and constructive-technological methods of anaerobic digestion process intensification are analyzed, their advantages and disadvantages are pointed out.

The paper analyzes innovation processes in Agro-Industrial Complex of Kazakhstan and gives the main directions of further development of agribusiness. The widespread use of innovation is the most efficient and effective means of solving the socio-economic tasks of Agro-Industrial Complex to provide food, increase the efficiency of agricultural production and protect the environment.

The article deals with the participation of the public sector of the economy of Kazakhstan in the formation of income and expenditure of households. The authors use the methodology of national accounts - 93 and its use to assess the dynamics and structure of the revenue figures of the households.

In this article the author defines identification of social and economic groups of society by an assessment not only the income, but also consumption by households of goods and services.

Productive functioning of market mechanisms needs in creation of according needed conditions by government for provision of own’s rights, contract’s observance, improvement of legal base in the sphere of innovations, provision of favourable financial-economic conditions, attraction of investments for innovative infastructure’s development. Thus significant meaning plays rational combination of government regulatio and market mechnisms activity, and also direct and nondirect methods of inovative activity maintenance.

This article describes the issue of improving the quality of the products as a way to improve the competitiveness of enterprises.

This article contains analysis of the current situation in the development of entrepreneurship, defined its main problems, as well as ways to solve these problems.

The purpose of this work is disclosure of theoretical bases of formation and functioning of the integrated economic structures. Various approaches for the description of forms of manifestation of integration processes between subjects of managing are considered. The tendency of the strengthened diversification vertically - the integrated economic structures by strengthening of a technological chain from raw materials production before release of end products is described.

The methodological approach based on comparison of these statistical regions of Republic of Kazakhstan is considered in this article. The comparative analysis of basic indexes of socio-economic development of the Pavlodar area is Given.

Problems of ensuring food security in modern conditions of economic management are considered in the article. To ensure food security in the region the strategy of state interests protection is necessary such as social stability, food needs satisfaction, independence from import, own food products production development, creation of reserve stocks to stabilize food supply.

The results of social and Pavlodar economic capacity analytical assessment are considered in the article. The social sphere and its development is a main direction of economy state regulation. Its state is mainly determined by processes of labor resources, their quantity and quality, level of productive power scientific and technical development, cultural and spiritual life of society.

The universal model of product and wealth of the region reproduction is presented in the article where matrices of goods and services production and distribution (with the separation of product flows produced in the region and imported) and matrices of fixed and financial assets are given that are used in production and other economics areas.

In article problems of development of the agrarian market of Kazakhstan in the conditions of the Customs Union are considered. The main conditions of achievement of a sustainable development of production of agricultural production are: internal support of agrarian production, strengthening of the international integration in the agrarian and industrial complex sphere, innovative development, development of information infrastructure, diversification of sales markets, creation of optimum transport routes.

This article discusses the possibility and practice of Kazakhstani enterprises producing chemical products and raw materials, which are oriented to export regulations REACH, adopted by the European Union that will greatly increase the safety and competitiveness of domestic production.

This article discusses some of the problems of chemical safety, such as the recycling of waste production, chemical accidents and disasters, environmental pollution and the negative effect of the chemical industry on human health, as well as methods for safer handling of chemical products.

This article presents the results of research of technology of curd product that is accessible to any enterprise and not requiring from the producer of additional expenses on his mastering are expounded in this article, and also possessing a biological and food value due to the use of vitamins, macro and microelements, bioactive and pectin substances.

In this article describes a new kind of technology development sausage using natural supplements.

The paper dwells on the technology of gallium production and the impact of settling on the physical and chemical properties of rich liquor to be fed to the cementation stage.

In the paper it is presented methodical approaches of working out the mechanism of national innovative system’s formation and development: regional aspects. World economic processes of integration and globalization are oriented to modern competitive knowledge, science, technologies and production. The regions are being involving not only on the level of one country, they also are being influencing of global economic events.

The article is devoted to existing issues in the field of taxation, which contribute to the trends of social exclusion in the society. The indicators that characterize social inclusion have been summarized. It is proved that using a particular tax policy social and economic processes can be adjusted, such as production level, employment, investment, science and technology, structural changes, prices, foreign economic relations, social standard of living, the level of certain products consumption. Under the conditions of various forms of ownership establishment in the formation of human capital, an important role is played by employers that provide aspects of social inclusion or prevent social exclusion.

In this article issues of efficient use of ferroalloys production waste to save costs are considered; energy efficiency of agglomerate production is calculated; sintering heat balance data are presented by a case study of Aksu Ferrolloy Plant. According to the annual economic benefits calculation the folowing results are obtained: due to аglogases recirculation, fuel saving is 1334.5 t.o.e.; due to reheating it is 1491 t.o.e.; due to installation of thyristor converters to the unit the annual energy saving is 1714000 kWh. Thus, it is identified that besides energy-efficiency measures during recycling of solid and gaseous wastes, the use of agglomerate increases IPF electric furnaces performance as well, decreases specific energy and reducing agent consumption which means the prime cost of finished products will be reduced.

This article is written in line with the important questions on antimicrobial effects of natural honey against gram-positive bacteria to reveal the therapeutic properties. These circumstances demonstrate the medical and social significance of solving the science-oriented task of developing high-quality pharmaceutical product on the basis of honey as well as its application not only as a preventive and medicinal agent to treat many illnesses but also as in beauty treatment.

This article discusses the benefits of cluster development, problematic aspects hindering the development of clusters in the Republic of Kazakhstan. According to statistics, in Kazakhstan so far failed to dramatically increase the innovative activity and effectiveness of the companies to create a competitive environment that encourages the use of innovation. Among the main problems should be attributed lack of qualified personnel, insufficient quality and availability of transport and engineering infrastructure, low level of institutional development of the cluster, limited access to foreign markets. Therefore, it is important to correlate the level of development of cooperation ties and incentive mechanisms, the level of technological equipment and organization of production, the level of competitiveness of suppliers, including the quality and technological level of the supplied products and services.

The article describes the results of an analytical assessment of innovative potential of Pavlodar region. Now in terms of the investment attractiveness of the country, it becomes an important task of forming a competitive domestic reserves of socio-economic development of the region, the solution of which requires the development of innovative management solutions. Innovations embodied in the new scientific knowledge, products, technologies, services, equipment, training of personnel, organization of production, is a major competitive factor in all economically developed countries. In the face of fierce competition inherent in a market economy, the innovative development of enterprises has become a key tool for ensuring sustainable long-term development

In the given article there presented the ranking score of the regions of the republic based on the main socio-economic indicators. Besides, there made a ranking on a ratio basis of the regions in the gross regional product of the country. The comparative analysis of the rating positions let us determine the causes reducing the growth of competitiveness of the region.

According to the “Productivity 2020” Program passed in the Republic of Kazakhstan, the target indicator till 2020 is doubling the labour productivity at the manufacturing plants. Onу of the intensive factors of the labour productivity development is effective motivation of the labour activity. In the article there are described the principles of formation of the labour activity motivation at the industrial enterprises which are reflected in various concepts of motivation and stimulation of human resources.

In the article the main issues and trends of agricultural biotechnology development in Kazakhstan, prospects of biotechnology application in the production of agro-industrial complex of the country have been considered. Data has been presented on: what researches are being carried out by scientific organizations in the field of agricultural biotechnology with attraction of leading foreign scientists and scientific organizations; what recommendations for technologies have been developed and what new biotechnological products have been created in all branches. Promising technologies in the field of biotechnologies in AIC for Kazakhstan as well as keys to the success in the development of science and technologies in AIC have been indicated.

This article views the research methods allowing by the organoleptic and physical and chemical indicators to estimate the honey naturality and approximately determine its origin due to the results of the analyses. The factors influencing the quality of the produced honey have been considered and the chemical Вестник Инновационного Евразийского университета. 2015. №3 ISSN 1729-536X 167 composition of the useful components of honey has been studied. It is shown that Kazakhstani honey can be rather competitive at the world market and the main task is the increase the honey production without changing its quality.

The issues of formation of scientific and methodological bases for improving healthcare organizations activity are considered, healthcare system in current market conditions are studied in this article. Such issues as competition between healthcare institutions providing medical services are also studied in this work. Main, crucial functions of control over management and marketing in healthcare institution are considered. Basic tools for improving efficiency of production capacity and financial resources of healthcare institution are suggested.

The study of the dynamics of productivity of middle school students in the general education school during the school week was conducted. It has been revealed that when the class schedule is created, the norms of the organization of the school day are sometimes not observed, which is reflected in the dynamics of the mental working ability of students in the educational process.

This paper presents a biotechnological approach of making a meat product in order to create a new domestic product. As the result of the study, prescription composition of the meat product with a cereal component was developed. Components comprise raw materials of domestic production, which allows to increase the level of nutritional balance of the product. The prescription composition includes secondary raw materials, and that allows manufacturers of processing industries to use non-waste production. This characteristic has been achieved due to the know-how. Secondary raw materials have nutritional value, but because of its features (coarse fibers) they are poorly digest by the body. The developed know-how ensures that these fibers are transformed into easily digestible form, giving the product special characteristics, which are described based on the results of nutritional value of the newly developed type of product. The developed new product allows to expand the range of meat products on the market.

The article focuses on the key issues of the socio-economic development and formulates the problems hindering its development on the base of materials of Bayanaul region.

The article deals with the development of technologies for the preparation of fermented dairy products, which makes it possible to consider the scientific task of creating yoghurt products with the use of starter cultures as an actual one.

This article analyzes the essence of the concept of "packaging", made the systematization of approaches and the role of packaging in the course of treatment. According to research results, based on a critical analysis of the existing provisions of the creation of the package proposed by its own methodological tools, which brings together the work of the producers (designers, graphic designers) and marketers.

The presented article examines the demographic processes taking place in the Republic of Kazakhstan, which characterize the demographic situation in Kazakhstan. And also the objectives and tasks of the state, the main of which is the management of demographic processes and development of the effective type of population reproduction are considered. The population policy covers a wide range of problems of reproductivity, the creation of the composition and structure of labor resources and their effective application. In a narrow sense, the demographic policy should be understood as the impact on the reproductivity by means of socio-economic activities that affect the demographic processes. The dramatically limited resources make it impossible to solve the government control problems of socio-demographic processes, employment, and unemployment in the required degree.

To improve soil water regime and moisture supply of plants, moisture-swelling polymeric materials are used in the form of hydrogels, which, upon contact with water, rapidly absorb and retain it for a long time in its volume. However, widespread of such hydrogels used in plant growing is currently limited by its high cost. In this connection, from the economic point of view, the use of composite materials as soil conditioners is of great importance, including inexpensive natural raw materials in its composition while maintaining high rates of moisture sorption and water retention. The task is to improve the mixture to maintain the soil balance of various agricultural crops by changing the quantitative ratio of components, significantly cheaper the composition, improving its quality indicators. The purpose of the scientific article is the mixture for maintaining the soil balance of various agricultural crops, which contains an active product based on a granulated hydrogel and a targeted additive.

In the article existed in foreign practice models of dual education and the experience of their application in the education system of the Republic of Kazakhstan and Pavlodar region are considered.

In this article questions of development of remote bank service which rates of development allow to predict with confidence intensive development of the bank sphere and replacement in the near future of ordinary channels of bank sales by remote are considered. Authors have given definition of remote bank service, its main types depending on distribution channels are pointed. An assessment of the modern market remote bank service in foreign countries is given, at the same time the main tendencies characterizing features and problems of its development have been allocated.

This article is devoted to the consideration of methods for receiving copper powder. The main methods of obtaining copper based on them are analyzed, the possibility of complex extraction of the investigated metal from spent solutions (wastes) of electrolytic production of copper.

The article considers ways of solving the problem of increasing the efficiency of agriculture in the North of Kazakhstan and preventing the deteriorating basis for the development of this important branch of the country. It is proposed to change the concept of agro-industrial complex management in the region as a whole.

The article describes a new method of using enzymatic rice in confectionery production. The article points to the actual continuity of expanding the assortment in the confectionery industry with the use of enzymatic rice.

Gellants are food additives used to increase the dencity and create a certain structure of the food product. In the dairy industry, there is an active work at developing new technologies for fermented milk products, which allows improving organoleptic quality indicators with the use of gellants. In this article, an analysis of the assortment of gellants used in the dairy industry was analyzed.

The article emphasizes the importance of carrying out breeding work with Kazakh horses of the zhabe type, which are of great importance for the productive horse breeding industry. The results of selection experiments on improving breeding and productive qualities are presented on the example of the Kazakh zhabe horses of Seletiinsky factory type at a stud farm "Altai Karpik Saydaly-Sartoka" of the Irtysh district of the Pavlodar region.

The analysis of the current management system of labor protection at «Aluminum of Kazakhstan» JSC is provided. Services and departments providing production activities are presented. The basic principles of the management system of labor protectionare considered. The organization of work on labor protection and development of corrective and preventive actions are presented.

The purpose of the work is the creation of an information system that allows to carry out activity on accounting and keeping statistics on the means of measurement used in production. An analysis of the use of such a system at a number of large industrial enterprises is performed. The database and the program working with a database of means of measurement on required technological positions and maintenance are developed. The program provides graphs on the accumulated statistical data.

Introduction of the quality management system is an important step for any production. Not only has the competitiveness of enterprise but also further successful development depends on the result of introduction of the quality management system and its proper functioning. Due to a quality management it is possible to obtain not only the improvement of structure of organization but also processes and their results quality. The aim of the article is to study the role of the quality management system in steady development of enterprise and problem of introduction of the quality management system in our country.

In this article, the physical and biological characteristics of raw animal and plant material for protein-inoil emulsion and the technology of the meat molecular product «Pressed horse meat in the form» were considered.

Consumer demand for functional foods in connection with the dynamic development of the trend of a healthy lifestyle increases from year to year. That is why the development of fundamentally new products with high nutritional and biological value, which heal and normalize the intestinal microflora, have a high antagonistic activity against a wide range of pathogenic microorganisms is relevant now.

This article discusses the innovative direction of production technology of the national cooked and smoked meat product.

The article is devoted to the current problem of quality control and safety of dairy products. The article provides a generalized description of the system models, discusses the main problems and advantages in implementing the quality control system in small and medium-sized dairy enterprises.

The article is devoted to risk analysis, methods of ensuring dairy products safety. Furthermore, the author dwells on such tool of quality control as a decision tree. The article presents the plan of HACCP for a diary enterprise on an example of the production a sour cream with 15-20 % of fat content.

The aim of the article is to analyze the study of cultured mushroom «Oyster mushroom». On the basis of laboratory experiments on the grown mushroom recipes of meat semi-finished products with its use are developed. After passing laboratory tests, meat products were recommended for population nutrition. The healing properties and ease of growing a cultivated mushroom are noted.

The article is devoted to the question of how to protect organisms with meat products as the main sources of protein nutrition. The purpose of this article is to study the technology of production of meat products and the identification of unresolved problems in connection with the direction of products. Developed proposals for the use of experimental data to improve the production technology of meat products using radioprotective properties.

Evaluation of the output of lime is made for three options for the use of Ferroalloy gas: when you use the physical heat of the gas; when using the chemical energy of the gas and the location of the reactor after scrubbing; when sharing of sensible heat and chemical energy of the gas. As a result of the calculation of the expected yield of lime, it was found that the use of Ferroalloy gas for the production of lime can fully provide or at least compensate for the deficit of lime in the production of steel. The technology of calcination of limestone with Ferroalloy gas is presented in the form of a cycle synchronized with the smelting of steel, including, in accordance with the gas outlet from the layer and their alternation with pauses of inter-blowing periods. The preliminary technological characteristics of firing obtained as a result of theoretical analysis are used for further experimental and theoretical studies.

The article presents the characteristics of the main types of delicious-spicy plants and organoleptic properties of spices, which are of great importance in the modern world. The mechanisms of influence of tastyspicy plants on the body with therapeutic and preventive purposes, proven in the research work of foreign and domestic scientists, increase the effectiveness of their use in various fields of production, especially as food additives.

This article discusses the use of probiotic Clostat method of adding a dry mixture in the combined feed in its production. This probiotic has a high resistance to enzymes of the gastrointestinal tract of animals, antagonistic activity to pathogenic and opportunistic microorganisms. This probiotic normalizes the intestinal microflora, increases the resistance of farm animals. Probiotic Clostet improves the digestion process, which affects positively the transition of weaned piglets on self-catering.

This article describes the factors that adversely affect the development of the body of young animals and contribute to reduce their productivity. One of the ways to solve this problem is the use of probiotic preparations, in this case Vetom 1.1. Research methods are presented, an analysis of the data obtained is made, according to which a conclusion is drawn about the high effectiveness of the use of probiotic Vetom 1.1 in swine production

Аt present, dairy enterprises use a system for analyzing and monitoring critical control points, as well as a quality management system, to produce high-quality and safe products. These systems take into account factors that may affect the production process and other components by identifying hazards from the procurement of raw materials to the consumption of products for food. The purpose of the article is to study the role and necessity of applying quality and safety management systems at dairy enterprises and reducing the risk at all levels of production

The article identifies and studies various fillers for fermented milk products with increased nutritional and biological value, presents methods of production of serum necessary for the development of a new therapeutic and prophylactic food product. The technical result is to improve the taste, increase the nutritional properties of the product, the introduction of the resulting whey drink fruit and berry additives in the form of syrup

This article describes the history of Bauyrsak, their varieties and new types of national products, made on the basis of plant extracts, characteristic of the Kazakh and Turkic people, as well as the organoleptic properties of the product. The plant extract, which is added to baursaks, gives color, enriches with vitamins, increases the nutritional value of the product

In the work measures on preparation of production personnel for actions in the conditions of emergency situations are considered on the example of Neftekhim LTD LLP. The structure of the control system and its main components were studied, the regulatory legal framework used in industrial safety was described. The possible risks and dangers, as well as harmful substances used in the production of plant products and their effect on the body were studied; the current state of the control system in the field of emergency prevention was evaluated

Nanotechnology is a field of fundamental and applied science and technology dealing with a combination of theoretical substantiation, practical methods of research, analysis and synthesis, as well as methods for the production and application of products with a given atomic structure through controlled manipulation of individual atoms and molecules. In the Address of the President of the Republic of Kazakhstan to the people of Kazakhstan Strategy "Kazakhstan-2050" New political course of the state, the leader of the nation, N.A. Nazarbayev, defines 10 tasks that Kazakhstan faces, one of which is the transition of Kazakhstan to the third industrial revolution. Nanotechnology is one of the branches of the industrial revolution. In the modern world, over the past few years, there has been a rapid development of nanotechnology. The peculiarity of nanotechnology lies in the possibility of their application in an unlimited sphere; therefore they are the basis for a completely new technological order of the economy. Сonsequently, its development in the country is regarded as a particularly important sphere of science. Usage of nanotechnology products will save on raw materials and energy consumption, reduce emissions to the atmosphere and, as a result, will contribute to sustainable economic development.

At the present stage of scientific and technological progress and rapid development of industrial production, the problem of environmental protection is becoming a problem. Air pollution has a serious impact on human health, global and regional climatic conditions. The main types of pollutants are gaseous substances. When fuel burns, carbon monoxide is released during traffic. This is a very toxic gas. Blood easily interacts with hemoglobin and continues to function; therefore, it is important to reduce emissions of toxic substances by vehicles and industrial facilities.

This article describes the main directions of socio-economic development of Pavlodar region, provides characteristics and dynamics of the main areas and sectors of the region, including the state of industrial production, agriculture, development of small and medium-sized businesses, the labor market, trade, electricity, heat and water supply, construction. The region is characterized by a progressive and diversified economic structure. In the structure of industry of Pavlodar region the largest share is occupied by the manufacturing industry. The priority direction of development of the regional economy in the context of ensuring its socio-economic development is the development of small and medium-sized businesses

This article discusses the innovative direction of molecular food technology. The processes of gelation and spherification of substances for the formation of hemispheres of gel-like meat product were studied.

The article is devoted to solving the optimization problem of finding an energy-efficient mode operation of one of the types of energy-intensive industries with the properties nonlinearity, inertia, and isolation. An optimization model based on a genetic algorithm is considered as a solution method. Moreover, the calculation of the fitness function for the selection of chromosomes is proposed to be calculated on the basis of fuzzy logic

The present article analyzes the problematic issues of digitalization of the automotive industry, motor transport and logistics in the Republic of Kazakh stan. The main emphasis is made on the consideration of positive results for the economy and society, which is the digitalization of the automotive industry, transport and logistics, the analysis of the tasks and content of digitalization in these sectors, the analytical study of the prospects of legal regulation of the automotive industry, motor transport and road logistics in the form of domestic legislative and international legal means to improve digitalization in these areas. The names and substantiation of 7 draft laws of Kazakhstan, which could be adopted in the near future by the Kazakh legislator, Вестник Инновационного Евразийского университета. 2019. № 2 ISSN 1729-536X 35 are proposed. The most important and priority bills include: «On state management of digital (creative) economy», «On the development of intelligent transport system in production and operation», «On the introduction of digitalization in the activities of companies, enterprises and institutions », «On the improvement of logistics based on digital technology along all the Kazakhstan roads».

The article presents the rationale for the use of fermented milk products containing probiotics and prebiotics for the prevention of diseases of the gastrointestinal tract. A method for preparing a functional fermented milk drink with prebiotics that helps normalize the intestinal microflora is also presented. The urgency is due to the wide spread gastrointestinal diseases among the population of the Republic of Kazakhstan, due to lack of nutrients essential for development of normal intestinal flora, and also with the instability of some types of probiotics, which reduces the efficiency of their use.

This article discusses both the main and additional costs associated with the movement of goods from the manufacturer to the consumer. The tasks for achieving optimal efficiency in the activity of a commercial enterprise in modern economic conditions are defined. The analysis of the dynamics of the sales market of the studied enterprise is carried out. Both positive and negative aspects of the trading enterprise are revealed.

This paper analyzes the state support for the development of small and medium-sized businesses in the Uspensky district at the present stage. The volume of lending to small and medium-sized businesses in the region in the framework of state programs for the development of productive employment and mass entrepreneurship in rural areas is considered

This paper analyzes the development of small and medium-sized businesses in Ekibastuz district at the present stage. The volume of lending to small and medium-sized businesses in the district within the framework of state programs BRM 2020, as well as grant funding for the development of productive employment and mass entrepreneurship in rural areas of the study area. The mechanism of service support for SMEs to provide non financial support is given

This article discusses the idea of developing a functional product that exhibits biologically active, bifidogenic properties and a strong antioxidant effect. The authors propose the formulation of sea buckthorn marmalade with the addition of immobilized probiotics. The jelly-fruit marmalade formulation is used as a control sample; apple puree is replaced with sea buckthorn concentrate, sugar and molasses with fructose. In experimental samples, various methods of introducing probiotics are used and their viability in the finished product is further evaluated. According to the organoleptic characteristics, the samples have a pleasant taste, smell, original color, gelatinous consistency. The best viability was shown by microorgan isms immobilized by incorporation into the gel.

The article is devoted to the current problem of differential diagnosis of diseases of viral etiology in small domestic animals. Viral diseases of dogs and cats are widespread among both high-breed and outbred animals. The spread of diseases is facilitated by an increase in the number of small domestic animals, the popularization of pet keeping, and cross-border operations related to the movement of animals. The possibility of using means and methods of diagnosing adenovirus infection in cattle, tentative diagnosis and differentiation of infectious hepatitis in dogs from plague of carnivores and parvovirus enteritis is being considered. Reducing the timing of diagnosis helps to increase the effectiveness of ongoing therapeutic and antiepizootic measures. The analysis of the place of carnivorous infectious hepatitis in the structure of the incidence of dogs is given. The article describes the research in the field of the possibility of using the established antigenic relationship of representatives of the adenovirus family for the in vivo and posthumous diagnosis of infectious diseases of small pets. The authors proposed a method for performing the production of serological reactions for the diagnosis of infectious hepatitis in dogs using diagnostic tools for adenovirus infection in cattle.

The article presents the results of the study of adaptive and productive qualities of the mountain-Altai breed of goats and their crossbreeding in the specific natural-climatic conditions of the region. The possibility of importing the mountain-Altai breed of goats and further breeding it in the conditions of northeast Kazakhstan has been determined

In the article presents the results of studies on the effect of temperature and pressure on the chloride sublimation of zinc and lead from converter dusts of steel production. Currently, an objective necessity is the development of dust utilization technologies for converter steel production, with its further use in production and production of by-products. The use of dust allows not only to save natural raw materials, but also increases production efficiency and improves the environmental situation. The content of non-ferrous metals in dusts makes it difficult to process and use them in agglomeration or in blast furnace production, while the iron content in converter dusts (sludges) makes it possible to use them as promising metallurgical raw materials. Therefore, for a more complete processing of dusts, extraction of non-ferrous metals from them is proposed. The purpose of this work was to determine the possibility of extracting zinc and lead from sludges of the converter production by the method of chloride sublimation. We used dust containing: 86,3 % Fe2O3, 3,5 % FeO, 0,9 % Al2O3, 1,6 % CaO, 0,9 % MgO, 1,1 % MnO, 0,8 % SiO2, 4,4 % ZnO, 0,5 % PbO. The study was conducted in the temperature range 200-1600 degrees C and pressures of 0,01; 0,1 and 1 bar based on a complete thermodynamic analysis using the HSC – 5.1 software package. Finnish metallurgical company Outokumpu, based on the principle of minimum Gibbs energy. According to the results of the studies, it was found that, at normal pressure, lead chloride sublimationbegins at a temperature of 600 degrees С, and zinc - at 900 degrees С: a decrease in pressure to 0,01 bar reduces the temperature to 500 degrees С and 700 degrees С, respectively; lead chloride sublimation under equal conditions is more complete than zinc; To achieve zinc chloride distillation at the level of 90-96 %, the process must be carried out at 1145-1200 degrees С and pressure from logP = -2 to 1,2 bar, while the degree of lead chloride distillation is 99,8-100 %.

This paper presents the results of the influence of ultrasonic treatment in the cofermentation of the cattle manure mixture (cattle) with the leaven from the rumen of ruminants on the process of biogas production. Anaerobic digestion was carried out in matinence periodic operation at the mesophilic temperature of 38 C ̊. As a substrate, a mixture with a content of 70 % cattle manure and 10 % leaven from rumen of ruminants was used. Treatment with ultrasound of the mixture was carried out at an intensity of 10 W/cm2 and an amount of input energy of 9350 kJ/kg of dry matter (DM), which completely eliminated the processes of stratification and sedimentation. Decomposition of organic matter (OM) in the periodic regime with the enzyme and ultrasound treatment occurred within 8 days, the usual substrate during this time OM decomposed 3.0 times less (only 14 %). The process of fermentation of methane in continuous and periodic modes treated with ultrasound, as at other temperatures, was stable, as can be judged by the values of volatile fatty acids (VFA) Volatile fatty acids (VFAs), alkalinity, pH, and biogas. The energetical efficiency of methane fermentation is estimated by comparing the volume of fuel (biogas) and heat consumption for technological needs. As shown by the comparison of efficiency of different regime, the largest amount of commercial energy in the form of biogas was obtained in the mode of joint fermentation of a mixture of cattle manure (cattle) with a ferment from the rumen of ruminants treated with ultrasound – 3 times more than without treatment (space).

Among many environmental conditions that affect a person, the most important factor is nutrition. Today, there is no doubt that there is a direct link between nutrition, health and disease. Proper nutrition ensures normal growth and development of a person, contributes to the prevention of diseases, has a positive impact on life expectancy and creates conditions for adaptation to the environment. A very actual topic for public catering in the Republic of Kazakhstan, namely for fast food companies, is the development of new recipes and culinary products from relatively inexpensive vegetable raw materials, as well as qualitatively new food products with a purposefully changed chemical composition. One of the main ways of solving problems of expanding the production of products for quick service, as well as products for dietary and therapeutic and preventive nutrition is the use of sprouted grains and beans. In this article, poly-grain mixtures of sprouted wheat and extruded soy beans in different ratios are studied and considered. Poly-grain mixtures developed by us are balanced in nutrients, vitamins and amino acids. The research was carried out on the basis of the accredited testing laboratory of RUBICOM enterprise LLP and the scientific laboratory of the Innovative Eurasian University. The purpose of this work is to study a promising method for increasing the nutritional value of grain mixtures by extruding them at different temperature conditions. To achieve this goal, the following tasks were planned: – to study the grain of soy beans and sprouted wheat on the organolepti c characteristics and chemical composition of the poly-grain mixture; – examine the chemical composition of the poly-grain mixture before extrusion; – choose the optimal mode of the extrusion process; – study and analyze the chemical composition of poly-grain extruded mixture; It should be noted that we have developed for the first time the optimal technological mode of extrusion of poly-grain mixture from sprouted wheat and soy beans, and the physical and chemical composition of the poly-grain mixture was studied. The results of the research presented in this paper are the basis for the development of recipes and technologies for fast food products. The reliability and validity of scientific statements is confirmed by the choice of modern methods of chemical composition analysis.

The article is devoted to the current problem of differential diagnosis of diseases of viral etiology in farm animals. Viral diseases are currently widespread, occupy a leading role in the infectious pathology of farm animals, causing enormous economic damage. Given the magnitude of animal vaccine prophylaxis, in order to increase the effectiveness of antiepizootic measures, the urgent issue i s the development of methods for the rapid and effective detection and differentiation of field and vaccine strains of the infectious rhinotracheitis virus in cattle. The possibility of using a polymerase chain reaction to identify and differentiate a vacc ine strain from epizootic strains and isolators of the cattle infectious rhinotracheitis virus is considered. In the process of research, a PCR-RFLP analysis method was developed to detect the IRT virus in the test material. The PCRRFLP analysis method was used to identify and differentiate the vaccine strain TK-A form epizootic strains and isolators of the cattle IRT virus. The principle of PCR, based on repeated repetition of DNA cycles, annealing and synthesis, which leads to an increase in the number of specific DNA fragments of the pathogen, allows you to take into account the results of PCR in an agarose gel. Analysis time is about 30 hours. The sensitivity of detecting viral DNA is 1-10 picograms (102 TCD). Due to characteristics such as relative simplicity and reaction rate, high sensitivity, specificity and reproducibility, PCR has recently become widespread in basic and applied research in various fields of biological science, including veterinary virology. The results obtained during the studies show that the use of PCR-RFLP allows to differentiate field and vaccine strains and isolates of the IRT virus with a high degree of reliability. The use of PCR -RFLP analysis increases the efficiency and informativeness of studies in the molecular epizootol ogy of cattle RTI, as it allows not only to identify the DNA of different virus strains regardless of their nature, but also to differentiate between them, including differentiating the strain TK-A used for the production of attenuated vaccines against epizootic strains and isolates of the virus.

In this article, the author examines the problems of legal regulation of public procurement in a state of emergency and quarantine measures. The purpose of this article is to study the changes that have appeared in the legislation of the Republic of Kazakhstan in connection with the introduction of the state of emergency and quarantine in the country. The author provides a legal assessment and analyzes the new norms of Kazakhstani legislation regulating public relations in the field of organizing public procurement. The closure of state borders, the violation of the usual, accumulated over the years, economic ties led to disruptions in the economic activities of state bodies. With all the disadvantages that took place, the positive factor was that the demand for the goods of Kazakhstani producers on the market increased. The introduced new method of public procurement using framework agreements made it possible, in turn, to ensure the guaranteed sale of products of Kazakhstani commodity producers, and also made it possible to apply import substitution of frequently purchased goods. In this article, the author, on the basis of a study of the current practice in this area, demonstrates the features of legal regulation of the sphere of public procurement in completely social new conditions with the help of novelties in legislation, and also reveals the features of the operation of legal norms regulating the sphere of public procurement of goods, works and services in conditions of a state of emergency and quarantine measures. The adoption of special measures by the Government of the Republic of Kazakhstan made it possible to transfer financial and economic relations in the state to a new format – "customer-supplier". The measures taken by the government have now been extended until the end of 2020. These measures on the part of the Government of the Republic of Kazakhstan made it possible to introduce a sparing legal regime for regulating this area for representatives of medium and small businesses, in order to minimize the losses of the latter arising against the background of the introduction of a state of emergency and quarantine measures. Taking into account the analysis of judicial practice in the consideration of cases on public procurement, the author emphasizes that in conditions of quarantine measures in Kazakhstan, as a rule, there are violations of the same type, both on the part of customers and on the part of suppliers.

The article analyzes the state and problems of cluster development in the real sector of the region based on the materials of the Pavlodar region. The main problem of innovative development of the Pavlodar region, as well as in all regions of Kazakhstan, in general, is the lack of innovative activity of enterprises, which is reflected in the volume, frequency and efficiency of their innovations. At the same time, most of the enterprises belonging to the real sector of the economy have sufficient resources for the development of innovative activity. However, the prospects for their interaction with enterprises in other sectors and sectors of the economy for the purpose of technology transfer are insignificant, which, in general, doesn’t meet the principles of balanced spatial development of the territory formulated by the program for the development of territories of the Republic of Kazakhstan until 2020. One of the ways to solve this problem is formation and development of a cluster approach and interaction of business entities. The article assesses the efficiency of the cluster’s functioning as an institution of regional development. On the example of the metallurgical cluster of Pavlodar region, the main ways and methods of forming cluster initiatives in the regional economy are considered, a SWOT analysis of the development of the metallurgical cluster of the region is given, and its main problems are identified; identifies priority directions of clusters’ development (metallurgical cluster, including the production of final products, the cluster of railway engineering, agri-food cluster), the realization of which in the region could create the conditions for the emergence and full development of a number of new highly specialized sectors such as cluster chemistry, cluster of road and construction machinery, transport logistics cluster, cluster of modern production technologies and engineering, cluster of manufacturing components for machinery and equipment and cluster of industrial electrical engineering and equipment for power engineering. The authors also noted that the realization of regional development strategies of cluster initiatives can potentially lay the foundations for clusters “future days”, such as: cluster of resource efficiency and environmentally processing, the cluster of new energy, the cluster of innovative medicine, tourism and recreational cluster.

When managing a filling station chain, it is necessary to solve the following tasks in dynamics: determining the volume of purchases by types of oil products sold and redistributing the available volume of various types of oil products to filling station chain. The peculiarity of this control task is that the replenishment of the storage of oil products is carried out centrally, and the sale of each type of fuel is carried out at separate filling stations of the network, that is, in many points. At the same time, the volume of each type of fuel sold by each station of the network should be taken into account separately, taking into account the seasonal demand for a specific oil product. In addition to modeling demand, information is needed on the volume of petroleum products that can be purchased from suppliers with the possibility of increasing or decreasing the volume of purchases due to demand. To solve this problem, a list of suppliers of a specific type of oil product with a possible range of supply volumes must be determined. In the proposed model, an attempt is made to solve the above problems. To solve them, a management model was developed, which was implemented using the Visual Studio C # programming environment and MS SQLServer DBMS. When developing the structure of the database tables, the task of managing a network of filling stations based on the Petri net was taken into account: that is, the database tables provided for storing information on the volumes of supplies of petroleum products, the volume of sales of each type of petroleum product, as well as the time of deliveries and sales. To solve the problem of centralized procurement for all types of fuel, the database provided tables with information about suppliers and possible volumes of supplies by them of various types of petroleum products. To solve the problems of forecasting demand, the model includes algorithms for predicting the volume of sales of petroleum products based on the accumulated time series of data for each type of fuel separately. The forecasting was carried out in order to assess the required volumes of purchases of oil products for the coming period. The prediction algorithms are implemented using two methods: linear approximation and exponential smoothing. Both algorithms take into account the seasonality of demand.

The article describes the results of a study of the effectiveness of the standards being implemented in railway transport. A general view of efficiency and standardization was analyzed. It was studied which document regulates the application of standardization in the Republic of Kazakhstan. Further, the international railway standard IRIS «International Railway Industry Standard» was taken as a basis, which, in turn, is based on the international standard ISO 9001. A study of the methods and types of effectiveness of standards was carried out, as well as an analysis of the applied international standard in the field of railway transport IRIS. The purpose of this standard is to create a business management system that allows for continual improvement, with an emphasis on preventing and reducing delivery defects. It is important to note that the effectiveness of standardization is evidenced by examples showing that ignoring standards turns out to be huge losses for a company for a number of reasons, for example, because its products have not been certified for compliance with a specific standard; due to the additional costs of the company for reworking products that are not manufactured in accordance with the requirements of the standards in the country of export. An analysis of the effectiveness of standardization work in the railway industry can be expressed in relative terms of the effects obtained as a result of the application of the standard: for example, in an increase in the level of safety or in economic growth. The basis for determining the actual effect is the actual level of production that existed at the given enterprise before the introduction of the standard. The measures that can be applied in order to increase the efficiency of solving the problems of developing standardization in the field of railway transport have been studied. Such standardization as one of the elements of technical regulation can provide a contribution to economic growth in excess of the corresponding indicators from the introduction of patents and licenses.

The article is devoted to the mathematical modulation of a complex of experimental data obtained in the process of experimental studies of processed cheese products, processed by mathematical methods. The purpose of this study is to establish the type and amount of the melting salt that promotes the formation of the plastic structure of the processed cheese product. The analysis of scientific research in the field of food technologies showed that mathematical modeling is used in the following areas: clarification of the modes of technological processes, design of recipes and assessment of the quality of finished products, as well as forecasting the shelf life of new products when they are put into production. The most relevant in describing the processes of food production are models of multivariate variance-regression analysis using methods of mathematical planning of the experiment. The authors carried out mathematical modeling and established graphical dependencies characterizing the degree of influence of the regulated factors X1 and X2 on the controlled ones that determine the quality and safety of processed cheese products. It is important that the mathematical analysis of the graphical dependences of the rheological parameters on the adjustable factors indicates the reliability of the data obtained. It is concluded that an increase in the melting salt dose leads to an increase in the – limit shear stress, which reflects the nature and state of the consistency of the processed cheese product. The process of normalization of the controlled factors by the maximum value was carried out. Graphical dependencies were built and regression analysis was performed, the results of which allow an objective assessment of the degree of influence of the type and dose of the melting salt on the chemical and organoleptic characteristics of the test products. The authors have proven that the optimal efficiency of transforming the structure of the constituent components of the recipe into a plastic structure of a processed cheese product that is stable during storage is provided by a combination of adjustable factors X1 (Solva 85) and X2 (Solva 120) taken in a ratio of 1: 1, with a total amount of 1,2 mas.%. At the same time, the quality indicators of the experimental products are characterized by the following values of the controlled factors: У1 – 1280 Pa; У2 – 9 points, У3 – 9,301 (2,0-2,2109 colony forming units /g).

Environmental protection measures are based, among other things, on the rationalization of the organization of the production waste management process. Population growth and the race to industrialize pose a serious threat to the ecosystem. Currently, the average global waste generation per capita is 494 kg / year. A large number of industrial enterprises operate on the territory of Kazakhstan. The range of manufactured products is very wide: household items, transport, building materials, equipment and much more. Each type of production is inevitably a source of a large amount of industrial waste, annually at the enterprises of Kazakhstan up to 600 million tons of waste are generated, three percent of which are recycled. On the territory of Pavlodar region there are enterprises in the field of metallurgy, mechanical engineering, chemical industry, construction industry enterprises, light industry, about a hundred in total. In this connection, the problem of treatment and disposal of industrial waste in Pavlodar region is very relevant. The article discusses the system of waste management in order to reduce their impact on the environment, activities for the disposal, transportation, disposal of waste, as well as their disposal at the industrial waste landfill in Pavlodar. The landfill in question is intended for the reception, temporary storage and disposal of non-hazardous solid industrial waste of the «green» level: waste and scrap of chromium, cadmium, aluminum, copper, lead, zinc, manganese, plastic waste, polyethylene, abrasive, rubber waste, ash and ash and slag waste; and also «amber»: waste containing mercury, arsenic, lead, waste batteries, phosphoric slags, waste oils, oil sludge. The scheme of organizing waste storage works is considered. The volume of accepted and recycled waste, as well as those placed at the landfill and used for their own needs, was analyzed, including construction waste, waste sleepers, ash and slag and abrasive scrap. The solution to the problem of industrial waste disposal is associated with the need for innovation and the introduction of new technologies and equipment.

The work is intended to determine the etiopathogenetic principles of animal prevention in gynecological pathology and issue a theoretical justification. At the same time, improving preventive measures aimed at preserving their health, increasing the productivity of animals in modern conditions of animal husbandry and ensuring high productivity of cows. In this regard, the main task is to develop ways to increase insemination of cows with the use of complex and homeopathic treatment. For the first time in the East Kazakhstan region, new scientific data on the main etiological factors leading to gynecological pathology and infertility of cows were obtained. Work has been carried out to improve measures aimed at preventing infertility of cows in the conditions of dairy farming in this region and stimulating increased insemination. New schemes for stimulating increased insemination using hormonal, homeopathic and other drugs have been tested. As a result, an increase in the productivity of cows was revealed, and stimulation schemes were introduced. For the first time in the farm" kamyshinskoye" an economic assessment of the damage from infertility of cows is given. Research work is done between 2016 and 2019 years by the Department of veterinary medicine of the State University named after Shakarim, in the laboratory "Agrotechnopark" of the State University named after Shakarim and national University of veterinary medicine and biotechnology named after Lviv and in the farm "kamyshinskoye" of the Shemonaikha district of East Kazakhstan region. To enhance the insemination of cows 3 groups of animals was obtained: animals of group I were not subjected to insemination; animals of group II for 1-3 hours before insemination grafted surfagon 3 ml (15 mg), 15 ml of Catosal, 15 ml habilita-Se, 10 ml uteroton; 8 days prior to insemination progesterone 2,5% 2 ml, Catosal 15 ml, habilita-Se 15 ml; cows of group III for 30-60 minutes before insemination were given Ovariovitis, and after fertilization Ovariovitis for 25-30 days and liarcine 5 ml. According to the results of drawings based on complex and homeopathic preparations, low costs were shown.

The article is devoted to comprehensive research and development of the technology of cream supplements for the enrichment of processed cheese products. This article discusses the steady trend towards the use of dairy products with probiotic properties in the diet of modern people. The authors justify the requirements for the chemical composition and properties of a new type of processed cheese product: the mass fraction of dry processed cheese product must be at least 45 wt.%, the amount of probiotic microflora at least 107 CFU/g, to adjust the fatty acid composition of the product, the use of milk fat substitutes. As a result of the research, the composition and technological parameters of the production of a cream Supplement intended for enriching a new processed cheese product were determined. Skimmed milk powder concentrate with a mass fraction of dry substances (48.0±0.5) %was selected to increase protein (nitrogenous substances) in the nutrient medium for microorganisms. To activate the growth of bifidobacteria, the prebiotic No. 1 – lactulose was studied. The main content of the study is the analysis of the effect of increasing the amount of SOM concentrate on the chemical composition of the compositions of experimental products. The bacterial concentrates Bifilact-B and Bifilact-u were selected as the source of probiotic cultures. In fermented products, microbiological indicators were determined: the total number of lactic acid cultures and bifidobacteria. The article analyzes the dynamics of acidity of experimental products fermented with bifilact-B bacterial concentrate and bifilact-u bacterial concentrate. It was found that in experimental products with a high level of acid formation, the growth of bifidobacteria decreases, this is due to the fact that at low pH values, the growth of bifidobacteria slows down, and at a pH below 4.5 – stops. There was a significant increase in the number of bifidobacteria in the presence of a prebiotic – lactulose concentrate. The authors proved that the fermentation process with the formation of a clot in experimental products with bifilact-B bacterial concentrate is completed within 9-10 hours, taking into account the time of compaction of the consistency. In experimental products fermented with bifilact-U bacterial concentrate, the fermentation process ends within 7-8 hours, that is, by (2.0±0.5) hours faster.

The study of the linguistic landscape of cities is currently one of the actively developing areas of modern linguistics. The linguistic landscape is considered in the article as an object of sociolinguistic research; the subject of these studies is the language of the city, its representation in the public communicative environment in the form of signs, inscriptions, advertising billboards and other visual forms of written language demonstration. The main methods of studying the language of the city are observation and analysis; the purpose of the study is to identify the means and ways of personal expression, and as a result, their recording in the linguistic space of the city. Self-expression of a person in the communicative environment of the city happens with the use of more and more non-trivial ways and linguistic and extralinguistic means in order to attract the attention of a certain target audience, a potential consumer of a product or service. The study of the linguistic landscapes of the city pursues the goal of understanding public multilingualism from the standpoint of the choice of a language, languages hierarchy, the phenomenon of language contacts, and the regulation of the written recording of languages. The linguistic landscape is, therefore, a kind of indicator of the language policy of society in relation to the languages of the peoples living in a given territory. The authors conclude that it is the linguistic landscape that is the most expressive and convincing indicator of linguistic diversity in a particular area. It is symbolic and can serve as a certain indicator of the mood of certain groups in society and regions. The degree and density of the presence of the particular language in the linguistic landscape is always an indicator of the significance, strength, and relevance of a language in society.

ing the image of a dog. The purpose of this study is to consider the national and cultural specifics, reflected in the stable expressions of the English and Kazakh languages with the "dog" component. The article provides a brief overview of works related to the issues of phraseology in English and Kazakh. The work was based on general scientific methods: induction and deduction, analysis and synthesis. The work with the collected card index of stable expressions was carried out by the method of continuous sampling, using the descriptive-analytical method. An important place in the work with the material was given to the Вестник Инновационного Евразийского университета. 2020. № 4 ISSN 1729-536X 17 methods of definitional, contextual and typological analysis. Using the comparative-comparative method, national-specific and universal features of zoonyms in English and Kazakh languages were determined. The material of the research was a card index of phraseological units of the English and Kazakh languages (more than 160 units) which were selected using the method of continuous sampling from phraseological dictionaries of the English and Kazakh languages. When analyzing the authors of the article relied on materials from phraseological dictionaries in English and Kazakh languages. In the course of the analysis, groups of phraseological units were identified and their differences and similarities in the compared languages were identified, as well as their national and cultural specificity, based on the action of universal cultural codes; the national and cultural specificity of zoonyms is determined by a number of extralinguistic factors: the location of the country, the living conditions of the people, their customs and traditions, history, religion and socio-political structure. All this secures national-specific connotation to zoonyms and determines their productivity. The results of the study showed that through the prism of axiology, an analysis of English and Kazakh stable combinations with the "dog" component, reflecting the paradigm of values (general cultural and national-cultural) and anti-values of the corresponding ethnic communities, was presented, as well as universal values representing at the intercultural level. The results of the study showed that through the prism of axiology, the analysis reflects the paradigm of values (general cultural and national-cultural) and anti-values of the corresponding ethnic communities. The research results have both theoretical and practical significance; it will be additional material for elective courses on the subject of "Lexicology" taught at the faculties of philology and foreign languages in higher educational institutions.

Basic problem: the Republic of Kazakhstan is a platform for implementing innovative projects in all spheres of the economy, providing the younger generation with resource centers, technological parks, agricultural equipment, industrial technologies and scientific and educational complexes. The main goal of such actions is to activate scientific research, increase the technological potential of the industrial sectors of the national economy, and stimulate the development of innovative activities in the field of research and development. The problems of developing an entrepreneurial culture are a cornerstone issue that combines a combination of motivational principles for generating and promoting ideas, activating youth entrepreneurship as the flagship of the future economy, and a complex epidemiological situation in the world that hinders not only the development of entrepreneurship, but also the course of all socio-economic processes in society. Purpose: The purpose of this study is to identify the problems of youth entrepreneurship and find ways to solve them in accordance with the principles and methods of implementation, including the unit economics. Methods: the research Area focuses on economic modeling techniques that are successfully used in international practice to determine the profitability of business models, taking into account the effect of the production of a unit of goods / services or a single client / customer. The implementation of this approach is facilitated by the use of traditional methods of scientific research, such as analysis, comparison, and a graphical method for visualizing the results obtained; quantification method and parametric method as an evaluation tool that allows formalizing the procedure for evaluating the performance of unit economics models. Results and their significance: when considering business models in relation to youth entrepreneurship, attention is paid to the skills and competencies that students who study the disciplines of the entrepreneurial block in higher education receive. The proposed methods of unit economics are actively used in the development and promotion of startups, as an integral part of business plans. It is concluded that youth business has started to play a crucial role in solving socio-economic problems, such as creating new jobs and reducing the unemployment rate, and training qualified personnel. The set of proposed measures provides additional opportunities and increases the influence of youth entrepreneurship, which becomes the basis for unlocking its potential.

Main problem: Small and medium-sized businesses, as an important component of modern production, largely contributes to maintaining a competitive tone in the economy, creates a natural social support for a social structure organized on the principles of the market, and also forms a new social stratum of entrepreneurs. Since the establishment of independent Kazakhstan, the sphere of entrepreneurship has always been in the center of attention of the state, and the Strategy "Kazakhstan - 2050": the new political course of the established state, comprehensive support of entrepreneurship as the leading force of the national economy has been identified among its priority tasks. At the present stage of development, the system of state support for small and medium- sized businesses in the Republic of Kazakhstan includes a number of institutions and state programs designed to provide comprehensive support to this sector of the economy. Despite the measures taken by the state to support small and medium-sized enterprises (SMEs), the development of this area in the regions and the Republic of Kazakhstan, in general, faces a number of serious problems, including those of a systemic nature, which involves researching the state, identifying problems and determining prospects for the development of small and medium- sized businesses. Purpose: to study the state, trends and prospects of development of SMEs in Pavlodar region, to identify and describe the problems of organizing the activities of entrepreneurs in the region. Methods: the state of entrepreneurial activity in the region is analyzed in the context of the main socially significant indicators of its development, the main trends and patterns of development of the SME sphere are identified and the reasons that form them are substantiated. As one of the tools for identifying and substantiating the reasons hindering the development of entrepreneurial activity, the study conducted a survey of entrepreneurs to identify the problems of SMEs in the region. Results and their significance: Based on the results of the study, a range of priority problems of SMEs in the region was determined, an assessment of their correlation with similar problems of the SME sector of the Republic of Kazakhstan was given, and a range of basic expectations of entrepreneurs in the context of government measures to support their development was outlined.

Main problem: Presence of acidic chemicals such as carbon dioxide and hydrogen sulphide, composition of production fluids triggers corrosion. Corrosion in oil and gas industry leads to deterioration of equipment since most of equipment is made of metal alloys. Application of inhibitors is one of the corrosion mitigation methods that needs to be controlled because it is important to identify optimal concentration of the chemicals in production fluids.Residual chemical analysis plays an important rolein identifying the appropriate dosage of corrosion inhibitors and its correction. It is imperative to find the most optimal concentration of amines due to the fact that both overdose and underdose could lead to equipment deterioration. The chemical analysis is hindered by complexity of mixtures that are applied in petroleum industry. Purpose: The main purpose of this article is to find out the most effective method of residual chemical analysis for inhibitors used against sweet and sour corrosion by studying and analyzing corresponding literature review. The analysis should be carried out with robust, sensitive, and accurate instrumentation. Methods :Theoretical study of composition and mechanism of amines used in oil and gas industry as corrosion inhibitors and selection of appropriate instrumental analytical techniques for the residual analysis. Results and their importance: After careful studying and consideration of modern instrumental analytical techniques the most optimal and efficient method in terms of robustness, time saving and cost was selected. Ion chromatography is an adequate method to carry out residual chemical analysis for amines that are used as inhibitors in oil and gas industry to prevent sweet and sour corrosion.

Complex research is carried out on the rational use of natural pastures with seasonal use in a specific area. The research was conducted in 2015-2017 on the lands of “Batyr” farm in Korday district of Zhambyl region. The pasture lands of the farm consists of 5 independent sites and are located in 3 geographical areas: foothill-steppe (950 hа), foothill-dry steppe (1370 hа) and foothill-semi-desert (1880 hа). The total area of distant pastures is 4.200 hectares. As a result of conducting of geobotanical researches, the farm territory of peasant farm "Batyr" in Korday district of Zhambyl region was divided into seasons (spring-summer-autumn) of their use, the yield of natural herbage and live weight gain of animals was determined. Results of accounting of productivity of natural herbages on zones, seasons of year are given in article and the gain of livemass of animals for the pasturable period is defined. When determining efficiency of sheep it is revealed that higher additional weight of a liveweight is received in experimental group of animal. The seasonal pasture on average in three years of researches at the end of the pasturable period provided an increase of a live weight of rams on 3.370 kg/head at ewes on 8.020 kg/head and lambs of birth year on 8.640 kg/head is more in comparison with control groups of animals. It should be noted that for the pasturable period the increase of alive mass of animals in experimental group in 2017 is higher than a research in comparison with previous years. In 2017 at a pasture of animals on seasonal sites it was applied intra seasonal pasture turnover at which unproductive driving of animals in search of a forage on the grazing square is practically reduced three times, besides degradation of the pasturable territory is completely excluded. It was found that the use of seasonal use of pastures provides more weight gain studied animals compared to animals that graze in one place with an unsystematic manner of grazing. The implementation of the results created the conditions for the restoration of degraded pastures with an increase in the growth and development of vegetation cover up to 15-18 % and an increase in livestock production through rational grazing up to 12 %.

Main problem: The article examines promising directions in the production of fortified food products in Kazakhstan and Russia. The authors carried out an analytical review of the current state of production of fortified bakery products on the territory of the Russian Federation and the Republic of Kazakhstan. Anemia has been described as one of the most common consequences of micronutrient deficiencies. The problems associated with anemia lead to serious complications for the health and well-being of people. Lack of folic acid and vitamins in the diet is the cause of cardiovascular disease, maternal and child mortality. Purpose: The article considers the problem of significant deviations in nutrition of almost all groups of the population of Russia and Kazakhstan, regardless of lifestyle, habits or income level, which have an extremely negative effect on the health of the nation: the average life expectancy decreases, the productivity of the working-age population and resistance to diseases decrease. Methods: Based on the studied domestic and foreign technical literature, patent information, an analytical review of the current state and prospects of the production of fortified food products in the Russian Federation and the Republic of Kazakhstan was carried out. Results and their significance: The authors have shown that food fortification is the practice of purposefully increasing the content of vitamins and microelements in food to improve the nutritional quality of food and have a positive effect on human health. The authors considered the question of how the problem of micronutrient deficiency, including iron, is currently being effectively solved in many countries by enriching food products of mass consumption with vitamins and minerals.

Main problem: This study is devoted to the study of the problems of using special expertise in the investigation of crimes related to human trafficking. The use of specialized expertise is an integral element in the system of investigative actions carried out in cases of human trafficking. In this study, the authors consider the features of the production of forensic examinations in the investigation of crimes related to human trafficking in the Republic of Kazakhstan. In the study, the authors consider the most typical types of forensic examinations that are conducted in criminal cases of human trafficking. Based on the analysis of scientific literature, as well as the survey of practitioners engaged in the fight against human trafficking and the analysis of criminal cases of human trafficking, practical recommendations for criminal prosecution authorities on the most effective conduct of forensic examinations in criminal cases of this category are proposed. The purpose of this study: to study the tactical features of the production of forensic examinations in the investigation of human trafficking, as well as the features of the use of special expertise. Methods: The methodological basis of this study is the dialectical method of cognition of social and legal phenomena, as well as system-structural, comparative-legal, logical-theoretical and private scientific methods of study. To achieve the objectivity of the research results, these methods were applied comprehensively. Results and their significance: The use of forensic expertise in the investigation of human trafficking is essential for the detection and investigation of these crimes. The study notes that the following types of forensic examinations are among the most common in the investigation of this category of criminal cases: medical examination, biological examination, handwriting examination, phonoscopic examination and odorological examination. The subject of the investigation must carefully understand the tactical features of the production of certain forensic examinations. The practical recommendations proposed by the authors of the study on the appointment and production of forensic examinations considered in the study are important for the successful investigation of the facts of human trafficking, but at the same time they have a recommendatory value and can be modified taking into account the specifics of a particular criminal case.

The COVID-19 coronavirus pandemic has brought about a new economic reality, to which every economic entity must adapt, regardless of the scale: within a region, a country, or the whole world. The article examines the regional economic mechanism in the context of the pandemic in the context of the interaction of the market mechanism of self-development and the control influence of the regional authorities. The destabilization of the economic situation in the regions as a result of the pandemic and related restrictions poses the problem of revising the main directions of regional policy To achieve the set goals and objectives, the general methods of empirical and theoretical research were used: analysis, synthesis, induction, deduction, generalization, description. Three spheres play a key role in the economy of Pavlodar region: industry, trade and transport. Just how to remain positive dynamics in terms of industrial production and maintained the services will depend on the development of the region, the main indicators which are discussed in this article through the prism of the events in the context of the pandemic. The necessary health measures taken in response to the pandemic have led to a severe reduction in mobility and are accompanied by high economic costs. The quarantine measures have had a direct impact on businesses, especially microbusinesses. To support this sector, tax incentives were provided, lending was expanded, and measures were taken to further facilitate the business environment. The article reflects only a small list of issues that required changes in the economic mechanism in the context of the pandemic and the introduction of restrictive measures, as well as the strengthening of the influence of external control on the economy. At the same time, the state as whole and individual regions, taking into account their potential and the actual situation in the economy, need to find an optimal balance between the prohibitions and restrictions imposed to ensure the safety of human health and the preservation of the economy in a functional mode, work and income of employees. This problem of finding a balance between prohibitive and permissive measures requires further analysis. At the same time, the state needs to develop and apply tools of a systematic nature, focused on the long term.

The data of calculating the actual cost of production are widely used in production management at industrial enterprises, to monitor compliance with the standard cost of production adopted by the enterprise, to identify ways to optimize labor costs and material resources. The level of cost depends on the activity of an industrial enterprise in a market economy: the amount of profitability, the economic efficiency of its activities. The choice of the method of cost accounting and calculating the cost of production depends on the specifics of the technology and organization of production, as well as the requirements of the efficiency of enterprise management. Studying the formation of accounting information when calculating the cost of production by type of product, comparing the level of costs with the revenue received makes it possible to determine the economic efficiency of production. The purpose of this study is to identify the problems of forming accounting information when calculating the cost of production for making decisions to reduce costs. The implementation of the research goal is facilitated by the use of methods of comparative analysis, synthesis, and graphical method for visualizing the results obtained. When considering the cost calculation, attention is paid to the fact that in market conditions there is a need for detailed cost accounting and calculation of the cost of production. If we take into account that in market conditions, prices for products are formed as demand increases, and demand is influenced by external factors, then we can only influence the costs based on the cost calculation. The basis for making effective management decisions will depend on how reliable and to what extent the accounting information is formed. Costs are the main constraint on the profit of industrial enterprises, since the main strategic goal of any enterprise is the mechanism for increasing profits. The ability to achieve this goal is limited by the following internal factors: the complexity of the cost grouping, technological processes, and the impact on product quality. It is necessary to improve the information system, which is based on the data of primary documents, document flow and the order of cost grouping. The proposed measures will contribute to strengthening the control function of the management and, as a result, effective cost management.

One of the agent modern tasks is to ensure the cleanliness of the air basin. To ensure this, it is necessary to clean the combustion products of the fuel removed from the boilers after their cooling into the atmosphere from harmful substances, including nitrogen oxide.

Main problem: Technogenic "metamorphosis" of vegetation near such large industrial facilities as Pavlodar is considered to be the result of various active chemical and mechanical factors provoked by economic activities associated with the influence of emissions from industrial companies. The effect of anthropogenic impacts on vegetation in all regions of Kazakhstan varies and is largely dependent on the economic development of the territory, but in any case, the end result of this impact is the change in the vegetation, causing violations of with structure, reduced vodorazdelnaya flora and productivity of communities. This, in turn, can cause infection of herbaceous plants with pathogenic fungi, which then carry with them: a decrease in the intensity of plant growth, a deterioration in their decorative qualities, a decrease in the survival of the biological species. Purpose: to study the types of fungi-pathogens of phytopathogenic diseases and to determine the degree of modification of the plant component, which is under intense negative technogenic influence from the Aksu Ferroalloy Plant (AFР). Мethods: For the experimental study, species of plants such as: Artemisia dracunculus L; Artemesia vulgaris L; Atriplex fera L; Atriplex patula L; Artemisia annua L were selected for the content of fungipathogens of phytopathogenic diseases. Results and their significance: This experimental study was aimed at the presence of fungi-pathogens of herbaceous plants as a result of human impact, occurring near the industrial zone "AFР". The composition of fungi-pathogens of herbaceous plants collected in this industrial zone was considered and studied. According to the results of an experimental laboratory study, phytopathogenic fungi of herbaceous plants belonging to 1 ordo, 1 familia, and 4 species were found.

Today, there is a full development of the food industry. It is characterized by the widest mechanization and automation of production and transport processes, the use of artificial cold and vacuum technology, the latest physical methods, chemical and biological preparations to accelerate technological processes. There are a huge variety of new products. New ways of long-term preservation of products in hermetic airtight packaging are promising. Now it is possible to deliver products from almost any industry to anywhere in the world. But the main problem for the modern consumer is that today's food industry is moving by leaps and bounds in the application and addition of chemical food additives: preservatives, flavors, dyes, stabilizers, antioxidants and substitutes for raw materials. To correctly answer the question of how to treat the use of food with food additives, it is necessary to understand and weigh the main disadvantages and advantages of using them. Advantages are that the product is better preserved, has an attractive appearance. Disadvantages are that the human body wears out, processing various chemicals, it is harmful to health. And with certain doses of use it becomes dangerous. Everyone has their own attitude to their health and their own priorities in life. Many people have come to terms with the daily use of products with additives, but others consciously refuse almost everything in the store. But the fact that no one wants to be poisoned from an overdose of various chemicals or starve to death. Therefore, the main advice is to carefully study the composition indicated on the label of food products and know the measure of their consumption. It is also impossible to believe blindly that the label was written with the truth. Manufacturers often use additives literally visually, which can lead to the production of a product with a dangerously higher concentration. It also happens that the manufacturer intentionally exceeds the norm in order to hide the shortcomings of the product (stale, poor quality of raw materials) and increase the yield of the finished product. The food additives added to many foods (usually designated by the code E) are predominantly harmful to the body. With moderate consumption, the use of products with E-supplements is not too harmful to the body (for example, several times a month). The situation is dangerous when a person consumes products with a large number of food additives daily or even several times a day when using various products. Nowadays, there are several hundred food additives with the code E (from E100 to E1521).

In this regard, there is a need to search for new ways and scientific and methodological developments to rationalize methods of teaching game techniques and the development of physical qualities, such as coordination abilities, which are well developed at the initial stage of training in rhythmic gymnastics. The aim of the study was to determine the influence of rhythmic gymnastics on the development of coordination abilities in young football players aged 7-10. The main method of obtaining results in the study of motor qualities was testing. It allowed us to determine the level of functional state of the cardiovascular system, as well as the level of development of coordination abilities, namely, rhythm, plasticity, accuracy, balance and orientation in space. As a result of the experiment, the effectiveness of the developed program was revealed. The results of the study showed that the use of elements of rhythmic gymnastics bring a variety of tools to the lesson and allow the coach to fully meet the physiological requirements of this age. The rhythmic gymnastics program can be widely used in children's football institutions, as the level of coordination abilities of athletes increases in the course of training, and better conditions are provided for the formation of skills to manage their movements, that is, to act purposefully, productively, and economically.

In modern conditions, many companies highlight such a problematic aspect in the management of the talent pool as the formation of leadership potential among employees, which undoubtedly affects the achievement of strategic goals and the efficiency of the enterprise as a whole. In modern economic conditions, the role of a leader in implementing the company's development strategy is very important. The important competencies of a leader today include responsibility, the ability to be responsible for one's obligations, initiative and creativity, a proactive approach to life, sociability and purposefulness. When a leader is a leader, he or she is assessed according to such criteria as personal qualities, values, personal effectiveness, creative thinking, and professional skills. These core competencies need to be developed internally. Moreover, if a company is determined to nurture its leaders, it must clearly build a policy of forming a personnel reserve, a pool of future leaders. This is a key aspect in the activities of leading companies. Purpose is defining the role of leadership potential to create a strong corporate culture and form effective teamwork. The formation of a talent pool is associated with the presence of a strong leader, and with the fact that the company's management maintains established traditions, and shows constant concern for customers, employees and other business participants. The corporate culture must correspond to the development strategy, and the success of the strategy implementation depends on how effective the manager will be, leading the strategy implementation, what are his leadership qualities. It is important to show how high and important is the role of the leader, his or her active participation in the formation of the personnel reserve. The method of analogies and such management approaches as personal, behavioral, process and situational were used in the work. Understanding and supporting the work to build a strong talent pool can help businesses become more resilient in the marketplace, improve production and management performance, and see themselves in the long term.

The article reveals the dynamics of grain production in the Republic of Kazakhstan, grain exports by countries. The author analyzes the grain market (sown area, yield, gross harvest). Kazakhstan has a significant potential for grain exports. Grain exports are important for the country's economy. The country is one of the six largest grain exporters in the world. This is due to the high milling properties of Kazakh grain, the quality indicators of Kazakh flour are highly valued in many countries of the world, which allows Kazakh wheat to be competitive in the world market and provide markets in various countries of the world. The main export destinations are Uzbekistan, Afghanistan and Tajikistan. The article analyzes the main trends in the development of the grain market and gives an assessment of the state.

This article discusses the shortcomings in the management system that hinder the sustainable development of rural areas. The main problems of rural development are identified. The directions of development of the Aksu district are determined on the basis of ensuring sustainable growth of the district's economy, as well as diversification, modernization of economic sectors and creating conditions for the production of competitive products. Promising directions of social and economic development of the Aksu district, which will allow the most dynamic development in the current conditions, are proposed.

The article presents the results of implementing a quality management system at the enterprise. The study and analysis of the international standard ISO 9001:2015, as well as sanitary and epidemiological requirements for production control were carried out. The main requirements and rules for the implementation of input, operational and output control of products at enterprises at all stages of the product life cycle were identified and presented. In addition, it was determined what requirements must be met by enterprises to implement a quality management system. It is important to note that this work is necessary at the enterprise, as it has the following advantages: by improving product quality, product sales increase, the level of management of the enterprise and personnel increases, and cost savings are realized at the stages of development, production and operation. It follows that to implement a quality management system, it is necessary to set the following tasks: describe the company's processes, develop performance criteria and evaluate processes, develop the necessary documented information, implement documentation in all departments, familiarize them with the quality policy and goals, conduct timely internal audits for further SWOT analysis, and conduct an assessment by an external auditor in order to obtain a certificate of compliance. An important step in quality management is that the organization should not eliminate nonconforming results of processes, but should identify potential nonconformities, assess the risk with the preparation of a Protocol, plan and implement actions to reduce risks. Difficulties may arise: lack of understanding by the staff of the need to implement a quality management system, lack of a clear vision, mission, lack of complete information on processes, lack of quantitative and qualitative evaluation criteria, quality is defined as the quality of products, not as the quality of processes, resources, lack of monitoring of customer satisfaction. It is possible to overcome these difficulties only with the implementation of the quality management system according to ISO 9001, since the requirements prescribed in the international standard are a real tool for improving the efficiency of the enterprise, which will help bring the organization to a higher level of development.

Main problem: In the 18th century, when industrial production began, the use of steam and mechanized production caused major changes in the economy. As a result, production costs decreased along with an increase in the quantity and quality of products. During this period, production underwent a revolutionary transition from manual labor to mechanization. The potential impact of Industry 4.0 on labor markets remains an under-explored scientific field. It is estimated that Industry 4.0 will lead to unemployment by changing the employment structure and will bring new structural problems in terms of unemployment and labor relations. Purpose: The purpose of the study was to establish the impact of Industry 4.0 on the labor market and identify the consequences of the impact. Methods: studied, the evolution of production development, when mass production with electricity led to the Age of Industry 2.0, and then the emergence of the digital revolution, the use of electronics and information technology in production processes, marked the beginning of the Age of Industry 3.0. It is expected, according to international experts, scientists, that automation and robotic production will have a serious impact on the unskilled workforce and cause a critical reduction in the labor force of vulnerable sectors of society, that is, women, migrants, youth and the elderly. Results and their significance: This study assessed the possible impact of the fourth industrial revolution on labor markets. Through a literature review and analysis of emerging trends in Industry 4.0, the risks, opportunities and challenges of the process are explored in a comparative perspective. It has been established that countries must correctly perceive the transformation of labor markets and take appropriate measures. Otherwise, the applied labor-based low-cost industrialization model will lose its comparative advantage

The Kazakhstani manufacturer has repeatedly faced situations when pseudo-enterprises, disguising themselves as domestic producers of goods, works and services, received preferences and used government support measures, won government and other purchases, while not having enough equipment for production. The article is devoted to current problems and prospects for the application of the Industrial Certificate in the Republic of Kazakhstan. The dynamics of the development of the sphere of public procurement of the Republic of Kazakhstan is considered, depending on the specific requirements for certain areas of production of goods, works and services. The material in this article is important from the point of view of ensuring fair competition between competing enterprises in the same industry. The complex of transformations in the system of standardization, certification and quality management has been carried out since the first years of independence of the Republic of Kazakhstan. These transformations have been observed over the years, vivid examples of which are: the application of the European model of technical regulation to the modern realities of the economic situation in the Republic of Kazakhstan, accession to the Customs Union, the adoption of unified technical regulations of the Customs Union, the introduction of new regulations and legal acts defining the share of local content in products and services, as well as the potential of domestic industries. The results of these transformations have proved that the system of technical regulation of the Republic of Kazakhstan is an effective tool for the development of the economy. The development of new Kazakhstani normative legal acts and normative documents introduced to support the domestic producer of goods and services will contribute to the transformation of the old system and the creation of a new one that is fundamentally different from the previous one. The article discusses problematic issues in the field of industrial certification, namely: a lack of qualified personnel; unregulated pricing system for work carried out in this area; the complexity of the industrial certification procedure; a lack of automation of processes of the industrial certification mechanism. Analyzing the practice of industrial certification, this article offers recommendations for solving the above problematic issues. New edition of amendments and additions to the «Rules for the formation and maintenance of the register of domestic manufacturers of goods, works and services, as well as the issuance of an Industrial certificate» approved by the decision of the Presidium of the National Chamber of Entrepreneurs of the Republic of Kazakhstan «Atameken» dated 28.12.2018. No. 28 is designed to reconstruct the process of obtaining the Industrial Certificate. The process should become more transparent, understandable and highly efficient. Also, with the introduction of changes, the problems that hindered the receipt of the Industrial certificate by individual enterprises should be resolved.

The sharp deterioration of the environmental situation in the Republic of Kazakhstan, associated with human activity and the impact of harmful factors on the environment, affected the quality of food consumed by insufficient consumption of domestic fruit and vegetable products containing vitamins, minerals of an alkaline nature, carbohydrates, vegetable proteins, pectin substances and active fiber. The problem of improving the quality of growing and processing fruits and vegetables is one of the main tasks of the food independence of the Republic of Kazakhstan. Currently, the share of large vegetable farms in the Republic of Kazakhstan is only 10%. The volume of industrial processing of fruit and vegetable crops in Kazakhstan is insignificant. The demand for domestic fruit and vegetable products in the country is met only by 35-40%, most of it is imported from countries such as Russia, Kyrgyzstan, Uzbekistan and China. There is a need for the development of organic vegetable growing in Kazakhstan and the creation of new types of domestic fruit and vegetable products containing a sufficient amount of useful and active substances that can bind and remove toxic substances and radioactive elements from the human body. The purpose of the work is to improve the technology of fruit and vegetable semi-finished products with natural spicy and aromatic additives, to develop a multi-component recipe for vegetable mixtures and a method for producing quick-frozen vegetable mixtures with high quality indicators. These studies were aimed at studying the chemical composition and functional and technological properties of vegetables and spicy - aromatic plants for the content of biogenic compounds: carbohydrates, proteins, vitamins, essential oils, minerals and other substances. The structure of plant tissues was studied and the mass fraction of moisture, dry matter, fiber, mono - and disaccharides, pectin substances, vitamin C was determined, the formulation and production technology of Assorted vegetable mixtures were developed, and quality indicators were determined.

Fruits and vegetables are most often consumed without being thoroughly processed before consumption. Some plant foods are vacuum-packed to ensure long shelf life as well as preserving the quality and safety of the product. Fruits and vegetables carry naturally occurring non-pathogenic epiphytic microflora on their surfaces. During growth, harvesting, transport and further handling they can be repeatedly contaminated by pathogens from human or animal sources. Fresh fruit crops have been implicated in a number of documented foodborne disease outbreaks. Outbreaks of diseases caused by bacteria, viruses and parasites have been epidemiologically linked to the consumption of a wide range of fruits and vegetables. The aim of our study is to assess the risk of contamination in fruit and berry crops and how to address this long-standing problem, namely, contamination of fruit and vegetables with unnatural pathogenic microflora. The following fruit and berry crops common in Turkestan region were chosen for the experiment: Apple variety Suislepskoe (stolovka) , peach variety Nectarine and grape variety Kishmish. Bacteriological inoculation was carried out by membrane filtration of used sterile water to obtain flushes from the surface of fruit crops. All work was carried out under full aseptic conditions. The utensils, water and other equipment used in the work were sterilised in advance. The data obtained during the experiment shows that there is a potential for widespread contamination of uncharacteristic microflora of plant products. Based on the results of the study it can be concluded that there are yeasts and acetic acid bacteria on the surface of all three samples of fruit and berry crops, which can be universally contaminated food and are not the natural microflora for the above mentioned crops. Specifically, fruits and vegetables can be contaminated with various bacterial pathogens, including Salmonella, Shigella, E. Coli O157:H7, Listeria monocytogenes and Campylobacter.

Main problem: Microbial-plant relationships, including epiphytic microflora, are the subject of attention of many scientists. Numerous works confirm the high interest of researchers and the relevance of studying this topic. Despite many years of research, some questions concerning the characteristics of the epiphytic microflora still remain open. It is already a well-known fact that the epiphytic microflora is directly related to the physiological development of the plant, including yield. This is due to the close interaction of the plant with the microorganisms living on its surface throughout the entire growing season. It is also proved that epiphytic microflora has the ability to change characteristics under the influence of environmental factors (temperature, humidity, soil contamination, sunlight, etc.). In this regard, the study of this topic is one of the important areas of biological and agricultural sciences and is of high importance. It should be noted that a significant role in the development of agriculture in the Republic of Kazakhstan and the Pavlodar region is played by representatives of vegetable crops, including tomatoes and potatoes belonging to the Solanaceae family, which indicates the high importance of the plants selected for the study. The combination of the above arguments determines the need to study the epiphytic microflora of plants and establish the regularities of its influence on the adaptive properties of the studied plants of the Solanaceae family, as well as on their productivity. In turn, the study of epiphytic microflora can also contribute to the search for new ways to increase the yield of plants and their resistance to various diseases. Purpose: The article is devoted to the study of the properties and characteristics of the epiphytic microflora of the surface of various organs of plants of the Solanaceae family (on the example of tomato and potato). The variability of the composition and number of epiphytic microorganisms in seasonal dynamics is shown. Methods: bacterioscopic method, fingerprint method, flushing method, Gram staining method. Results and their significance: The characteristics and properties of representatives of epiphytic microorganisms of aboveground (leaf, fruit, flower) and underground (potato fruit) plant organs were studied. The role of the influence of environmental factors on the variability of epiphytic microflora is determined on the example of plants Lycopersicon esculentum Mill. (common tomato) and Solanum tuberosum L. (tuberous nightshade). The differences in the microflora of different plant organs in different periods of vegetation are shown.

Main problem: Computer systems and technologies are changing our society significantly. These changes are interconnected with both social and production spheres. Innovative digital technologies have a huge impact on the labor market and professional activity, contributing to their transfer to the electronic environment. Using digital technologies, modern people set new goals and solve problems with an increasing speed of problem solving, capitalizing on the possibilities of collaborative distributed actions within networks. In this regard, new competencies of specialists are in demand. Purpose: The purpose of this study was to establish the impact of the fourth industrial revolution on the education system and the development of skills and thinking for learning. Methods: When conducting scientific research, economic and statistical methods were used. These methods were also used in comparative analysis, as well as in assessing data and indicators of the higher education system, taking into account the impact of the fourth industrial revolution. The analytical method was used to consider the characteristics and factors influencing the development of skills and thinking for learning in modern conditions. The abstract-logical method is used to identify problems affecting the development of the labor market under the influence of digital technologies. Results and their value: The result of the study is that conclusions are drawn about the upcoming changes. Automation and digitalization are likely to lead to significant unemployment in most countries, so adaptation innovation policies are needed to help offset unemployment due to digitalization. Governments need to invest heavily in higher education as an economic development tool for their citizens. Lifelong learning should be identified as a critical element of success in the era of the fourth industrial revolution. Curricula should develop digital skills and address workforce disruptions due to automation.

The main problem is that money plays a huge role in a market economy. The market is impossible without the movement of money that carries out the turnover of goods and services. The movement of money serves the sale of goods, as well as the movement of the financial market. The cash resources of an industrial enterprise are an integral part of current assets. The money is needed for settlements with suppliers and contractors, for making payments to the budget, for issuing salaries, bonuses to employees, and for making other types of payments. The meaning of the organization of funds is to effectively manage the cash flows of an economic entity on the basis of data obtained from the results of the analysis of cash flows for a certain period of time and accounting data. Information support is a system of information and methods of its processing that allow us to assess the real state of an industrial enterprise and identify factors that contribute to improving the effectiveness of management decisions. In these conditions, it becomes inevitable to improve the information support for accounting and auditing of funds. The purpose of this study is to identify the problems of accounting and auditing of funds at industrial enterprises by improving information support. The implementation of the research goal is facilitated by the use of methods of comparative analysis, synthesis, graphical method for visualizing the results obtained. For any enterprise, it is necessary that there is enough money at the beginning of the production cycle, and at the end their growth is ensured. With such business management, a constant turnover of funds will be ensured, which will provide the enterprise with an influx of funds, and will make it possible to carry out activities in other areas (investment or financial) at the expense of the money generated by the main activity. In a market economy, it is necessary to proceed from the principle that the skillful use of funds brings additional income to the enterprise, and, therefore, the enterprise should constantly think about the rational investment of temporarily free funds to make a profit. The authors analyzed the cash flow by type of activity on the basis of financial statements, and developed recommendations for solving the problems of accounting and auditing of funds, which are aimed at improving cash flow management, which will allow an industrial enterprise to achieve its goals and plans as much as possible.

The main problem: This article is devoted to the key problems of the fuel and energy complex of the Republic of Kazakhstan: 1) lack of production capacity to meet the growing demand for energy and fuel from the economy and the population. Increased demand for electricity and heat, which will require the commissioning of new generating capacities.There is already a shortage in the fuel markets. Modernization and bringing the existing oil refineries (hereinafter referred to as refineries) to full capacity will not allow providing the domestic market until 2030; 2) the export orientation of raw materials, the dependence of the economy on the export of energy resources. In order to attract technology and investment in the oil and gas and nuclear industries, agreements on the extraction of energy resources were concluded with international export companies. In the medium term, Kazakhstan may face a shortage of oil for domestic refineries, if measures are not taken to stimulate its refining within the country. The uranium mined is fully exported; 3) high energy intensity of the economy, low level of energy efficiency. There is a high potential for increasing the efficiency of energy use both in the electric power industry and fuel production, and at the level of final consumption – in industry and housing and communal services; 4) decrease in the replenishment and quality of the resource base in the oil and gas, coal and nuclear industries; 5) low environmental friendliness of technologies used in the fuel and energy complex. Purpose: The purpose of the article is to reveal the problem in the field of ensuring the fulfillment of international obligations between different countries and their own energy sufficiency by gradually changing the structure of energy production. Methods: Studying the experience of increasing the efficiency of the use of energy resources and energy saving as a priority of the state policy of the country. Analysis of production capacity with a constantly forecasted shortage of primary energy resources and insufficient growth of capacity for the production of electricity and heat. Consideration of the possibility of compensating for the shortage by saving energy resources, increasing tariffs for energy carriers, as a stimulating factor for their effective use. Results and their significance: The results of this article will reflect the problems of energy, as the most important driving force of global economic progress. The well-being of the people depends on the state of the country's energy sector, therefore there is an urgent need to solve the emerging problems. The global energy problem is, first of all, the issue of stable and efficient supply of fuel and energy to mankind. Today, the energy sector of Kazakhstan is focused on fuel resources, since the country is provided with hydrocarbons and other energy resources. About 72 % of electricity in Kazakhstan is generated from coal, 12,3 % from hydro resources, 10,6 % from gas and 4,9 % from oil. Thus, the four main types of power plants generate 99,8 % of electricity, while alternative sources account for less than 0,2 %.

Currently, close attention is paid to industrial safety at hazardous production facilities. Compliance with industrial safety requirements is directly related to the risks of accidents that can lead to man-made disasters, negatively affect the health and life of the population. As in any other industry, there are problems in ensuring industrial safety. There are several reasons for this: the backlog of standards from scientific and technological progress, the exclusive competence of state authorized bodies, and the lack of a risk-based approach. After the collapse of the USSR, the requirements of industrial safety in the Republic of Kazakhstan have practically not changed: laws and statutory instruments (hereinafter-the LSI) are approved and put into effect, after which they are constantly changed and supplemented; the presence of national and international standards, which, in fact, are revised on the basis of the USSR standards, taking into account the influence of the realities of the time. It can be concluded that the current standards are not focused on the future, scientific and technological progress, innovation, so they are constantly undergoing changes, thereby adapting to the necessary requirements that dictate modernity. State regulation does not contribute to the effective development of industrial safety. This is due to the fact that the state performs exclusively supervisory functions (thus it is exclusively educational in nature), and there is no dialogue between authorized state bodies, expert organizations, scientific organizations, and testing laboratories. If we consider the experience of the Russian Federation in the field of industrial safety, then it makes no sense to accept even some experience, since: similar to the Kazakhstan’ LSI and regulatory and technical documentation (and their constant dynamics), the development of cooperation with the Russian Federation within the framework of the Eurasian Economic Union. Accordingly, it is advisable to consider the experience in the field of industrial safety in Europe and the United States of America because of the effectiveness of regulation and supervision than in the Republic of Kazakhstan and the Russian Federation. This article provides information about international experience in the field of industrial safety in the United States and the European Union. The tasks of state regulation in the field of industrial safety in the Republic of Kazakhstan, the Russian Federation, the United States, and the European Union are described in detail. The analysis of normative-legal acts and normative-technical documentation is carried out. Based on the analysis of international experience, solutions to problems in the field of industrial safety for the Republic of Kazakhstan are essentially presented. The purpose of this article is to reveal the problem in the field of industrial safety in the Republic of Kazakhstan and international experience that the Republic of Kazakhstan can borrow in order to effectively ensure industrial safety. Study of international experience (USA, EU countries, Russia) in the field of industrial safety in terms of: analysis of standards; regulation (control and supervisory functions) to ensure safety. The results of this article will reflect the problems that hinder the effective provision of industrial safety in the Republic of Kazakhstan and essentially suggest ways to solve them.

This article discusses the current data on the biochemical properties of bacteria of the genus Lactobacillus and their use in industry, particularly in dairy production and biotechnology. Microorganisms of the genus Lactobacillus have antagonistic activity against pathogenic microorganisms and perform an immunomodulatory function. The positive effect of lactobacilli on human health explains their active use in probiotics. The positive effects of normal intestinal microflora and probiotics are mainly due to bifidobacteria and lactobacilli. In probiotic therapy, various types of bacteria of the genus Lactobacillus are used, such as: L. acidophilus, L. rhamnosus, L. plantarum, L. fermentum, L. delbrueckii subsp. bulgaricus, L. casei, L. paracasei. In recent years, the biotechnology of probiotics has been intensively developing - drugs used for the correction and prevention of microecological disorders in the gastrointestinal tract of humans and animals. An urgent issue is obtaining new data on the biological properties of lactobacilli, creating new probiotic preparations based on them using modified approaches to cultivation. The results of determining the species L. acidophilus L. casei, L. rhamnosus, L. paracasei, obtained by the classical biochemical identification method based on saccharolytic activity, complicating species identification, are comparable to the molecular genetic method. In the case of L. casei, L. rhamnosus, L. paracasei, it is necessary to carry out modern identification methods based on the polymerase chain reaction, since their biochemical properties are similar, which makes it difficult to carry out species identification. The molecular genetic method is a valuable addition to the intergeneric and species identification of lactobacilli, given the variability of the classical biochemical method.

Currently, the problems of environmental safety are facing society. The industry develops every year. In this critical economic situation, the oil industry is a stimulant for the economic sector in Azerbaijan. The level of development of this industry is also relevant due to other reasons: sociological, technological and features of the economy of Azerbaijan. The production activity of oil processing, concentrating harmful substances and energy, is a source of man-made danger and pollution of the natural environment. The risk management process mainly consists of three stages - risk safety analysis, risk assessment, which is carried out in comparison of calculated and actual risk levels, the so-called acceptable risk levels and the adoption of appropriate regulations and management decisions. One of the factors that should be taken into account when assessing risk and safety is to determine the necessary costs. Since these costs are paid directly to the company, they try to minimize them as much as possible, which reduce the accuracy of risk assessment. One of the objectives of the study is to determine the optimal value of the necessary costs. It is established that the less reliable the method, the lower is the cost of its implementation. The methodological basis of the work was scientific works on these problems of scientists-economists, mathematicians on safety and risk assessment at industrial enterprises. When developing the presented methodology, computational algorithms developed by Dow Chemical were used. This company has collected a large volume of material on accident statistics, taking into account damages. Based on the obtained and experimentally verified data, a system of indices has been developed, an assessment of various indicators for qualitative and quantitative risk assessment of oil refineries. The analysis of the technogenic danger of oil refineries makes it possible to determine ecological and economic losses and choose rational possibilities of acceptable risk. The required costs, depending on the level of risk, are determined based on an increase in the accuracy of calculating the probability of occurrence of the cause of risks. The article examines the relationship between the expected level of risk and economic losses during oil refining in separate technological units, which allow determining the required level of risk and the expected economic damage.

The article is devoted to the development of a technology for obtaining organic fertilizers from poultry waste based on biocatalytic processes. Currently, many poultry farms have become sources of environmental pollution, thereby causing serious environmental problems and economic and social damage. The problem of reliable protection of the natural environment from pollution by bird droppings is currently relevant. In the area of operation of large poultry farms, air pollution by microorganisms, dust, foul-smelling organic compounds, which are decomposition products of organic waste, as well as nitrogen, sulfur, and carbon oxides, is possible. Bird droppings contain acids, nitrogen, phosphorus and potassium, heavy metals. The content of nitrogen, phosphorus and potassium changes dramatically depending on the quantity and quality of the feed. Humic substances isolated from brown coal have a sufficiently high sorption activity and are used as cheap sorbents for solving a number of environmental problems in industry. These studies are aimed at minimizing the main disadvantage of the anaerobic digestion process, the low reaction rate, which leads to the need to create large-volume bioreactors. On the basis of the research carried out, a technology has been developed for obtaining organic fertilizers from poultry waste by the method of anaerobic fermentation of chicken manure with humidity at a temperature of 27 °C - 50 °C with the addition of sodium humate. The resulting fertilizer is intended for use in agricultural production, horticulture, floriculture, forestry, municipalities, in household plots in order to increase the yield and quality of crop production. For the developed technology, an application has been submitted for obtaining a Patent for the invention of the Republic of Kazakhstan «Method for producing organic fertilizers» (priority No. 2021-22818, dated July 13, 2021). The invention allows to significantly reduce the time of fermentation, to enrich the product with organic and mineral products contained in sodium humate, to convert the salts of heavy metals into an insoluble state, to improve the environmental friendliness of the method.

Main problem: The development of the genetic potential of poultry, as well as the receipt of high-quality eggs for collection or further incubation, are possible only if rational and correct feeding of the broodstock and, more importantly, the young during its rearing period is observed. During this period, high-quality protein nutrition occupies an important place, which determines the level of productivity, stable growth, reproductive ability of the bird, as well as the state of health during the feeding period. Protein deficiency always remains an urgent problem for agricultural land, whose main activity is aimed at breeding dairy and meat animals. In this regard, research in the field of finding the use of non-traditional protein feed is of great need. If we summarize the modern achievements in the field of protein and aminoacid nutrition of poultry, we can find the most profitable way to obtain feed additives in industrial production. The studies, the results of which will be described in this article, are aimed at studying the possibility, experimental substantiation of the optimal dosage and the effectiveness of using the feed additive from crustaceans Artemia salina in the diets of chickens of the egg-meat direction of productivity [1]. Purpose: To study the possibility, experimental substantiation of the optimal dosage and the effectiveness of the use of the feed additive from crustaceans Artemia salina in the diet of chickens of the egg-meat direction of productivity. Methods: Analysis and generalization of theoretical information Results and their significance: This article presents the results of the analysis and generalization of theoretical material. The theoretical significance is determined by the fact that it is invested in scientific and practical problems related directly to solving urgent problems, increasing the efficiency, competitiveness and quality of domestic poultry products.

The development of extraction techniques of medical plants aims to maximize the bioactive compounds production. Тechnologies in this area of industry have not high enough еfficiency factor. In some cases, it reaches only 40-50 %. Therefore, development of new methods to effectively extract different compounds from plant material and their input into large-scale industry is of great importance. The goal is to determine an effective and suitable technology for extracting bioactive compounds from medical plant. This is a narrative review paper which focuses on different extraction methods of medical plant. To find relevant articles for this narrative review, 73 articles were reviewed. Of these, 14 irrelevant documents were discarded. This review analyses various extraction processes to guide the selection of suitable methods for various types of medical plants and applications. This is done by outlining traditional and modern methods of extraction techniques, exploring the importance of solvents for extraction, and comparing novel and alternative methods of extraction. In conclusion, based on the current knowledge, solvent extraction is the most common method for medical plants extraction. Enzymatic hydrolysis and supercritical extraction are advanced techniques with high yield of compounds. However, more research is needed for some modern extraction methods.

The article discusses ways to improve the oral and speech skills of primary school students, where the primary role is given to interactive strategies aimed at organizing the optimal interaction of students with other subjects of the educational process in a communicative educational environment. Currently, the main criteria and indicators of the methodology for the development of foreign language communicative competence of schoolchildren have changed, the basic basis of the system of techniques and methods of teaching English to primary schoolchildren based on the use of interactive cognitive strategies. The authors call a complex of exercises of a receptive, productive and productive-creative nature, which is consistently implemented at all stages of the corresponding technology: motivational-stimulating, informational, analytical, actualization, productive, creative, analytical and evaluative. The article describes their influence on the development of language competencies and creative abilities of primary schoolchildren. The authors note that the motivational-stimulating, informational, analytical stages, the stage of actualization, as well as the productive, creative, analytical-evaluative stages, provide for the involvement of students in joint activities to master the content of cognitive problems in English, it presupposes the interiorization of communicative skills by younger students in accordance with with the accepted norms of interaction, the organization of the development of oral speech in English lessons in the lower grades based on the use of interactive cognitive strategies in accordance with the level of their linguistic and sociocultural knowledge, skills and abilities. To study various approaches in the development of oral and speech skills in lower grades based on interactive cognitive strategies, analysis of a set of tasks and exercises at different stages of the formation of oral and speech competence in lower grades using interactive cognitive strategies, goals and objectives of the practical application of interactive cognitive strategies when teaching foreign language communication, the contradictions between social expectations and the objective need for educational practice in the creation and implementation of a special methodology for the development of oral speech in primary grades based on the use of interactive cognitive strategies. Methods: during the study, a descriptive method, methods of systematization, analysis, interpretation were used. The authors of the article note that the integration of communicative activity in a foreign language with project, research, musical, visual, subject, literary and creative is of great importance for the comprehensive development of the skills and abilities of oral speech of primary school students when using interactive cognitive strategies. The developed training model for the development of oral and speech skills in the lower grades on the basis of interactive cognitive strategies (goal, objectives, approaches, principles, content, technology, means, performance criteria, conditions for implementation) contributes to the development of communication skills and linguistic competencies in the process of mastering foreign language students of elementary grades.

The specifics of the management of healthcare institutions are due to the fact that healthcare is a special field of activity that differs significantly from other types of activities. One of the most important management tasks in the field of public health protection is the achievement of targets: improving the quality and accessibility of medical care through the effective use of limited financial, material, labor and other health resources in conditions of rapidly growing competition in the medical services market. The purpose - is to review and summarize the domestic and foreign experience of management in health care. The article emphasizes that the serious institutional transformations taking place in the domestic healthcare system in recent years are aimed at improving the quality of medical services in the implementation of the state guarantees program, at switching to a single-channel model of financing medical care, at introducing the principles of result-oriented budgeting into the activities of socially oriented organizations providing socially significant services. The practical implementation of the above innovations requires a revision of the concept of management in the field of healthcare, the priority areas of which correspond to the best world practice. The preservation of the health of the nation is a strategic guideline of state regulation in the field of healthcare, which determines the targets of state policy. When writing the article, traditional methods (comparison, description, measurement), general logical methods and research techniques (analysis, generalization, etc.) were used. The article discusses the main theoretical foundations and organizational and economic mechanisms of the healthcare management system in market conditions. The author notes that effective healthcare is a significant factor stabilizing the socio-political situation at all the above-mentioned early stages of the reform. Therefore, studies of economic relations in healthcare in the transition period, the role of innovation policy in the management of healthcare institutions are becoming relevant. At the same time, issues of the effectiveness of the functioning of healthcare institutions are of particular importance, which are ultimately determined by the creation of socio-economic, scientific, technical, organizational and economic prerequisites for the progressive development of productive forces using the achievements of scientific and technological progress, the latest medical technologies.

One of the management concerns of the progressive development of a modern organization is the efficiency of its HR potential. This concern is often resolved to quality issues of training graduates, inefficient labor market regulation, both at public level and regional one. These factors, external to the organization, positively impact the effectiveness of its activities, but today the government and business environment have already formed the tools to address this problem. However, there are also a number of inner concerns in HR management based on non-exact coordination and balanced HR Strategy, its orientation, goals and objectives and the company’s strategy. But only in this situation, both HR Strategy and HR Policy, more specifically, can become an effective tool for HR management as part of the company’s strategic development objectives. The purpose is to study and make a comparative analysis for supporting HR Policy of a number of major Kazakhstan companies, to analyze the relationship and coordination of companies’ HR Policy with their general strategy. We used classic methods, such as analysis, comparison, description, generalization, justification, etc., while preparing the paper and rationalizing the problem studied in it. As to this paper, based on materials of major companies of the Republic of Kazakhstan, the authors study and identify the content of HR Strategy and HR Policy as the main factors of domestic employers’ approach to HR management issues. The analysis proves the multi-vector approaches of Kazakhstan organizations to the formation and HR development. It seems also obvious that HR Policy of Kazakhstan companies has been and remains highly situational manner providing rationale to solve some or other HR problems related to dynamics of market situations and dynamics of goals and objectives for their development. The authors emphasize that the effectiveness of HR management and the HR Policy one of the organization requires a clear comprehension of the position and relevance of HR in organization. Honestly, this comprehension will be mainly governed by such factors as ownership, industry aspects, productivity levels, buoyancy rate of technologies used and the market of products or services sold by the organization. It is highly important that this comprehension is embodied properly in HR Strategy and HR Policy of the organization and is balanced with its market development strategy.

Main problem: The unfavorable conditions in which a significant part of the population of our country lives (living in conditions of harmful, stressful, physical, chemical and radiation effects), an imbalance in nutrition dictate the need to create a variety of functional products enriched with pro– and prebiotic factors. In the science of nutrition, a functional direction has been developed - this is nutrition, which provides for the consumption of such products of natural origin, which, when used daily, have a regulating effect on the body as a whole, its certain systems, organs, providing a drug-free positive correction of their function. Compared with traditional types of dairy products with high organoleptic and commodity characteristics, produced on the basis of classical technological techniques, dairy products of the new generation should have increased nutritional and biological value. The article is devoted to the research and development of the technology of a new cottage cheese product - cottage cheese paste produced with the addition of lactulose concentrate and fruit and berry fillers. This article discusses the steady trend towards the use of fermented milk products with functional properties in the diet of modern humans. Purpose: Study and development of technology of thermized cottage cheese paste enriched with prebiotic lactulose and fruit and berry fillers. Methods: Analysis and generalization of theoretical information, organoleptic evaluation, physicochemical methods of analysis, microbiological methods of evaluation of cottage cheese paste, quality control of the finished product. Results and their significance: The positive role of prebiotic substances in the vital activity of the macroorganism was studied. It is not for nothing that academician Andrei Georgievich Khramtsov once called lactulose "a miracle made of milk." Lactulose, being a strong bifidogenic factor, allows stabilizing the microflora of the stomach. Lactulose activates the growth of bifidobacteria, which take root well in the intestine and ferment lactulose to form lactic acid. Lactic acid suppresses the development of pathogenic and putrefactive bacteria. As a result of the conducted studies, it was determined that the cottage cheese paste enriched with lactulose had high quality indicators and retained its consumer properties during the entire storage period. The introduction of lactulose into the recipe of cottage cheese paste does not reduce the nutritional advantages of the finished product.

The variety of species and forms of parasites of agricultural animals and the features of their life cycles are the basic foundation for the production of different types and medical forms of antiparasite medicine. In the treatment of the parasitic diseases of agricultural animals, one of the main factors is that the veterinary doctors have the knowledge on the mechanics, efficiency and the safety for humans and environment of the medicine being used. Taking into account high pathogenicity and resistance of parasitic organisms and their ability to adapt to effect of medicine, it is crucial to permanently monitor the efficiency of the applied anthelmintic drugs, including the new drugs offered by veterinary services. This article will describe the results of the research on pharmacodynamic and pharmacokinetic parameters of «Ivermectinum», «Ivermec», «Aversect-1», «Аvrsect-2», «Аivin» drugs and their methods of application with the consideration of terms of maintenance and immune status of cattle herds in Mayconyr village (Irtysh district, Pavlodar region). A comparative analysis of efficiency of the above mentioned drugs in dehelmintization and treatment of cattle was conducted with the results provided. The recommendations and the restrictions on use of the drugs were determined considering the farm condition. The experimental research of the aforementioned broad-spectrum drugs was conducted strictly following the rules of asepsis and instructions on application. The total number of replacement heifers subjected to the dehelmintization under the method of analogues is 150 units. Anthelmintic treatment was conducted two times a year - in springtime (March-April) before pasturage, and fall time (September-October) before confining the cattle in the stable. Coprological study on intestinal helminthes of the examined cattle was conducted in Irtysh RVL of the Pavlodar regional branch of RVE RVL VCaSC MA RK by ovoscopical, flotation and larvoscopical methods. There is a comparative analysis on the efficiency of avermectin group antiparasitic drugs applied twice a year for cattle dehelmintization. The recommendations on the use of the aforementioned drugs for dehelmentization and prevention of parasitic diseases are provided and the requirements for the use were determined.

Main problem: The key task of the development of the regions of the Republic of Kazakhstan is to ensure their sustainable socio-economic development by increasing its competitiveness and innovation activity. To develop a successful strategy, as well as for its subsequent successful implementation, it is necessary to have a clear vision and idea of what the region will be like in the near future. This vision should be clearly formulated and understood by all interested parties in order to properly coordinate efforts in achieving the set goals. In turn, based on the vision, various initiatives and activities are being formed, the implementation of which is aimed at implementing the main directions of sustainable development of the region. Purpose: to consider the main directions of the implementation of the strategy of competitive, sustainable and safe development of the region. Methods: The theoretical and methodological basis was the concepts, hypotheses and theories presented in the works of domestic and foreign researchers. The methodology is based on a systematic approach, within which methods of comparative, factorial, subject-object; structural-functional, statistical analysis and extrapolation have been applied. Results and their significance: In order to ensure the sustainable development of the Pavlodar region in the future, there is a need to form the basis for the creation of new sectors, as well as to consider opportunities to diversify the regional economy. Currently, there is a structural change in jobs, which leads to an increased role of professional services industries in the field of information technology, engineering. It should be noted that the level of development of small, medium-sized businesses and entrepreneurship in the region is at a low level, due to the predominance of resource sectors in the economy. These sectors, due to the peculiarities of the technological process, do not form a system of suppliers around themselves. However, in order to ensure the progressive development of the industrial complex in the region, it is important to create conditions for the development of SMEs in the region and, accordingly, a system of suppliers around leading manufacturing enterprises. The high competitiveness of the Pavlodar region in the future until 2030 will be ensured through the development of priority clusters, as well as through the emergence of new industrial sectors of the economy. Thus, the priority clusters of «today» include: metallurgical cluster, including the production of end products; cluster of railway engineering; agro-food cluster.

The sustainable socio-economic development of the regions is determined by a number of factors, including the implementation of an effective budget policy, which plays a special role for the performance of social functions, regulating Inter-level organizational relations, strengthening the economic and financial independence of the regions.Effective management of budget policy makes it possible to purposefully use the mechanisms of budget regulation at all levels of management. At the same time, it involves the implementation of a number of functions, of which the control function is the most important. In the system of economic relations, it is assigned to a specialized financial body – the Treasury. Topical tasks are: regulation of budget flows in the region, strengthening control over the receipt and targeted use of budget funds; improving inter-budgetary relations; increase the revenue base of budgets by increasing their collection; etc. In the process of solving these tasks, a number of managerial, organizational and methodological problems arise, the solution of which contributes to improving the effectiveness of the budget policy of the region and, as a result, its economic development. Objective - to study the regional specifics of the implementation of budget policy in terms of the formation and execution of local budgets on the example of the Pavlodar budget, identify the existing problems in the region and determine the directions for improving the budget process. The methodological basis of the study is formed by general scientific and special methods of cognition: analysis and synthesis, deduction and induction, historical, logical, structural-functional and comparative analysis, as well as individual scientific methods: statistical-economic and computational-analytical. The formation of the local budget is carried out through the application of a single methodology, a single budget legislation and orientation to the Strategic Development Plan of the Republic of Kazakhstan until 2025, developed for the implementation of the main document of the state planning system for the medium – term period-the long-term development strategy of Kazakhstan until 2050. The implementation of all the tasks set out in the strategic development plans of the Republic will begin at the level of local budgets. The solution of State tasks is guaranteed, first of all, to meet the needs of the population at the local level. The role of regions in the entire process of reproduction cannot be overestimated, so the independence, flexibility and high degree of efficiency of using budget funds at the local level is the key to the successful development of society, production and business in any territory.

It is known that an increase in the volume of production in any sphere of production as a consequence increases the intensity of anthropogenic impact on the environment, including the atmosphere. This problem is especially typical for oil refineries. On the one hand, this is due to the complexity of oil refining processes and the release of various hydrocarbon compounds into the atmosphere during processing. Therefore, when implementing sustainable ecological and economic development in the Azerbaijani regions that are associated with oil refining, an increase in the volume of products should not create an increase in environmental impact. This problem is considered one of the factors directly affecting the economic situation of the enterprise, as well as creating certain environmental, social and economic problems for society as a whole. The purpose is to study the possibility of using the correlation-regression method in solving the problem of determining the presence of the decapling effect. The relationship between the volume of petroleum products produced and the amount of pollutants released into the atmosphere is random and is characterized by stochastic and statistical dependence. At the same time, on the basis of a mutual comparison of the methods of correlation and regression analysis and the method of production function, the effectiveness of correlation and regression analysis is determined. The methodological basis of the work was the scientific works of scientists-economists, mathematicians providing the definition of the decoupling effect at industrial enterprises. In the presented methodology, the obtained estimates of the performed in real time vary depending on the values of the set parameter. When developing the presented methodology, the STATISTIKA software package was used. This program was developed by StatSoft. Based on the obtained and experimentally verified data, the equation of linear regression dependence is determined. During the research, it was found that in some cases it is not possible to evaluate the statistical characteristics of a random variable or it is accompanied by serious errors. Therefore, when processing data, instead of mathematical expectations and variances, we used selective mathematical expectations and variances. The analysis of the ecological and economic situation of oil refineries based on correlation and regression analysis allows us to determine the presence of the decapling effect. The obtained correlation coefficient between the volume of production oil products and the volume of emissions into the atmosphere shows that there is no statistically significant relationship between these parameters. Thus, there is an achievement of the decoupling effect between the production of petroleum products and the volume of emissions of pollutants into the atmosphere.

Main problem: Today electronic information is one of the important resources in the management system. Electronic information resources are not only means, but also control flows. For example, any instruction or instruction in the management system is actually a guide to action. At the same time, for example, data on the movement of an object (employees, goods, money, etc.) are information resources, the storage and accounting of which is the basis of the organizational process. Large flows of information require their structuring, and operations on them become time-consuming. One of the ways to solve this problem is the development and implementation of an information system. Purpose: To analyze and design an information system using specialized tools designed to optimize the implementation of the above stages of software system development, using the example of a real business process. Methods: The article discusses the methodologies of CASE tools designed to automate software development processes, namely, the first two stages of the life cycle: analysis and design of a software product. The analysis and design of the business process functionality is carried out using the IDEF0 functional modeling methodology. The design of the database structure of the information system was carried out using the methodology of semantic (information) modeling IDEF1X. Description of the scenario of the designed software for a real business process is carried out using the dynamic modeling methodology IDEF3. Results and their significance: The article substantiates the relevance of the use of modern CASE-technologies in the process of analyzing and designing a future information system, as well as for the purpose of possible optimization on the example of a real business process "Inventory accounting". As a result, a comprehensive business process model was built using tools based on CASE-methodologies. The resulting model, as well as the description of its construction, is a clear example of the use of CASE technologies for software developers, as well as system analysts and IT specialists.

Main problem: The use of waste heat is most often solved by installing heat exchangers, but this is not effective when the temperature of this heat does not exceed 10-15 0 C, in which case this heat can be used using a heat pump. Where can I get this heat? Almost any enterprise needs cooling of any equipment elements or substances – working fluids; the heat received from them can be sent to a heat pump and used here at the enterprise. Purpose: Consideration of the possibility of using the heat of cooling water from the pump CNS 60-165 and the proposal of a new scheme with the installation of a heat pump that uses this heat. Methods: This is achieved due to the fact that it is proposed not to discard the heat, but after its use in the heat pump evaporator, transfer it to the heated medium - water, which is then sent to the shower cabins of the enterprise. Since the showers are located in the same room, the cost of transporting heat and losses will be minimal. Methods: In the course of the research, the possibility of using the waste heat of an industrial enterprise for using it here at the enterprise for the purposes of hot water supply was considered. For these purposes, it is proposed to install a heat pump, thanks to which the thermal potential increases, which makes it possible to fully use the received heat. Results and their significance: As the experience of foreign countries has shown, heat pumps can be widely used in many industrial enterprises, and in conditions of increased competitiveness, in order to reduce energy costs and the cost of manufactured products, install heat pumps to utilize excess heat, for example, process water, which is available in many production allows you to have a significant economic effect.

The main problem: Modern research in the development of fermented milk products is focused on increasing the bioavailability of milk components, as well as the use of bacterial components of sourdough, which increase health properties. The use of the fermentation process of skimmed milk with a combined starter consisting of traditional for cottage cheese and starter cultures of probiotic cultures immobilized in a gel of biopolymers is very important. Purpose: The purpose of this study is to determine the optimal amount of starter, consisting of an association of probiotic cultures immobilized in a gel of biopolymers (membranes) to be added to fermented skimmed milk in order to enrich it with functional ingredients. Methods: A one-factor experiment was used. The culture association Propionibacterium freudenreichii subsp. was used as a regulatory factor. Shermanii, Bifidobacterium lactis and Streptococcus thermophilus, immobilized in a biopolymer gel, added to skimmed milk in the form of membranes (determined as a percentage of the mass of fermented milk). Controlled factors are the main indicators characterizing the efficiency of the skim milk fermentation process; these are active acidity, the logarithm of the number of viable cells of bifidobacteria, the logarithm of the number of viable cells of propionic acid bacteria, and organoleptic evaluation. Results and their significance: Based on the results of a mathematical analysis of the totality of values of controlled factors depending on the amount of starter cultures of probiotic cultures, mathematical models were built to determine the degree of influence of the starter on the quality indicators of the product, using the Table Curve 3D-v4 mathematical computer program.

Main problem: It is very important for each company to obtain an industrial certificate, which makes it possible to get into the Register of Domestic Manufacturers, as they expect to receive large orders. With the receipt of an industrial certificate, their prospects for participation in various tenders and purchases will significantly increase, where they can show their abilities, compete with domestic producers, and also have an advantage over importers. Since July 1, 2019, the industrial certificate has become mandatory for participation in public procurement. Corresponding changes to the rules for public procurement were made by the Ministry of Finance of the Republic of Kazakhstan. Taking into account the experience of the «Rules for determining the country of origin of goods, issuing a certificate of origin of goods and canceling its validity», approved by Order of the Acting Minister for Investment and Development of the Republic of Kazakhstan dated February 24, 2015. No. 155», it becomes clear that the document does not take into account a number of «narrow» specifics of individual industries. Purpose: development of amendments and additions to the «Rules for the formation and maintenance of the register of domestic producers of goods, works and services, as well as the issuance of an Industrial Certificate» for the subsequent possibility of obtaining an Industrial Certificate by a chemical industry enterprise for the production of mineral fertilizers. Methods: study and analysis of literary sources, statistics and modeling of the procedure for issuing an Industrial Certificate. Results and their significance: the problems of application were studied, ways to solve these problems were found, and amendments and additions to the “Rules for the formation and maintenance of the register of domestic producers of goods, works and services, as well as the issuance of an industrial certificate” were developed. At the moment, the Rules need to be carefully finalized. It is necessary to consider this issue together with authorized state bodies, associations and business representatives, since obtaining an Industrial Certificate will directly affect participation in public procurement, and, accordingly, the economy of the Republic of Kazakhstan.

In modern conditions, the problem of the incidence of cows with high productivity in the postpartum period is relevant. It is these animals that are more susceptible to various diseases, primarily due to violations of the technology of keeping and feeding, weak body resistance, heavy loads during fruiting and milk production. It is known that as a result of various metabolic disorders, calving of cows in farms proceeds with various deviations. The lack of calcium in the blood due to hormonal disorders leads to hypocalcemia and paresis after calving, which is often the cause of death of animals. Therefore, the improvement of prevention schemes and treatment of puerperal paresis in cows is very relevant. Purpose of the article – Improvement of preventive and therapeutic measures for postpartum paresis in cows on the basis of the Tassu farm in Akmola district. The work was carried out under production conditions on a livestock farm in the Akmola region, in the farm "Tassu" in the spring and summer. The object of the study were black-motley cows with a pregnancy period of 250-260 days. 22 animals were selected in the experimental group, 12 animals in the control group. The average weight of animals is 567 ± 34.5 kg, age 5-6 years. The cows of the experimental group received injections of the drug Karsulen, which included: 2 % Cardus marianus D3, 1 % Sulfur D6 and 1 % Arsenycum album D6. Karsulen was administered to cows intramuscularly or subcutaneously at the rate of 1 ml per 100 kg of animal weight, the dose volume should not be less than 5 ml per animal. In the postpartum period, in the complex therapy of postpartum paresis in cows, Karsulen is used intramuscularly or subcutaneously 1-2 times a day. The use of the drug Karsulen with the composition: 1 % Cardus marianus D3, 1 % Sulfur D6 and 1 % Arsenycum album D6 has a regulatory effect on protein, carbohydrate, fat metabolism, restores impaired function of the gastrointestinal tract, liver and kidneys.

Main problem: recently, much attention has been paid to energy saving in production, especially when it comes to industrial units that burn fuel. There are several ways to maximize the use of the heat released during the combustion process, for example, to reduce the temperature of the flue gases at the outlet of the unit, by maximizing its use, both in the technological process itself and by installing additional heat-receiving units, for example, air heaters or other heaters. Another way to save money is to reduce heat losses through the lining of these high-temperature units. Metallurgical units that consume a large amount of energy and fuel require an analysis of their consumption, and ways to save their consumption based on the results of the analysis. Purpose: this article considers the possibility of replacing the existing inner insulation layer of the second and third sections of a high-temperature unit - a metallurgical furnace, with a new one with better technical and economic indicators. Methods: the possibility of replacing the existing inner insulation layer of the second and third sections of the high-temperature unit with a new one, with the best technical and economic indicators, was considered. The calculation of heat losses by thermal conductivity through the side surfaces and the roof with new insulation was performed, and the economic efficiency of the proposed solution was proved. Results and their significance: replacing the existing inner layer of insulation - refractory concrete PHLOCAST M30 (thermal conductivity coefficient from 1,4 to 1,45) with the proposed CERALIT GUN HK 70070 (thermal conductivity coefficient from 1,03 to 1,12) will reduce heat loss to the environment, and thus to reduce fuel consumption for the furnace.

As part of solving the priority tasks set in the Address of the President of the Republic of Kazakhstan Kassym-Jomart Tokayev, a significant role is given to the development of the food industry, including dairy products. Big tasks are to be solved by branch science in the field of processing raw materials of plant and animal origin using the achievements of bio- and nanotechnologies to improve the quality, biological, nutritional value and food safety. New approaches are needed to organize the complex processing of plant and animal raw materials in order to improve the economic, social and environmental aspects of the production itself, as well as the life of the population of the Republic of Kazakhstan. Despite the extensive range of processed cheeses, it is constantly updated. This is due to the need to meet the requirements of nutritional science, changing consumer demand, as well as the availability of raw materials and considerations of the profitability of a particular type of cheese. The working hypothesis of the research was the assumption that for the melting of raw materials it is possible to use reagents that affect the active acidity of the medium, stabilize the structure, bind moisture and improve the consistency and organoleptic characteristics of the finished product. The article is devoted to the issue of the process of melting rennet cheeses. The purpose of the article is to show that the melting process is closely related to different forms of raw material protein micelles. In this article, the influence of the type and amount of melting salt on the formation of the structure of processed cheese is considered, the rheological indicators of experimental products are determined in accordance with the scoring of processed cheeses. The indicator of water activity (аw) was established, the microbiological parameters of the experimental products were determined.

In Kazakhstan, within the framework of the Program «Development of domestic value and export-oriented industries», new modern dairy enterprises are being actively modernized and new modern dairy enterprises are being created, where membrane processes are being introduced to concentrate the components of milk. This is necessary for the rational and integrated use of raw materials, including through the processing of secondary resources, the main of which is whey. Improving the production processes of traditional food products and developing innovative ones is possible only with the use of the latest technologies and technological equipment. Membrane processes are widely used for the use of fractionation and concentration of liquid dairy products, which allows for a new solution to the processing of raw materials and opens up opportunities in the development of new types of food products. The article is devoted to the issue of production and processing of whey in Kazakhstan. The main types of membrane technologies and the advantages of their use in the dairy industry in the Republic of Kazakhstan are considered. The role of membrane technologies in the processing of whey is substantiated, various methods of introducing membrane processing methods to ensure the demineralization of whey, obtaining products with high biological value and consumer properties, reducing the cost of energy carriers, reducing the volume of raw materials in order to save transport costs, non-waste processing of milk solids, recycling water are described. This article analyzes the problems of using resource-saving membrane technologies in the production of dairy products in the Republic of Kazakhstan, ways to solve existing problems associated with increasing the economic efficiency of enterprises. The favorable impact of the use of membrane technologies on the social and environmental aspects of whey processing in the country is substantiated.

In this article, comprehensive studies have been conducted on the effective use of natural pastures in conditions of vertical zonality in the project territory of Batyr Korday district (Zhambyl region). The data presented shows how important it is to comply with the norms and loads of pastures for further preservation of pasture yields and prevention of degradation. Consequently, there is a need to develop effective and scientifically-based systems of pasture turnover and the introduction of measures to restore pasture lands in the Zhambyl region, taking into account the peculiarities of the climate and geo-botanical indicators. Pasture lands make up about seventy percent of the entire territory of the Republic of Kazakhstan. The potential productivity of these lands reaches twenty-five and more million tons of fodder units. Pasture is the main renewable forage plant resource. It should be emphasized that haphazard use has led to the fact that land degradation processes occur on 27.5 million hectares of pastures, feed capacity decreases, biological diversity decreases, erosion processes manifest themselves, etc. All this requires the development of science-based approaches to the exploitation of pasture resources, compliance with the basic elements of rational grazing. The current situation may have a twofold path of development. The first way is the absence of strategic initiatives for the effective use of pastures for small producers will lead to a final reduction in the feed capacity of the pastures used. And the second way is small and large-scale use of the huge forage potential of the restored pastures.

The production of vaccine preparations before release requires standardization of their immunobiological parameters, especially safety and immunogenic efficacy. An indicator of the immunogenic effectiveness of the lumpy skin disease vaccine is the resistance of vaccinated cattle against the virulent virus. However, according to preliminary studies, the virulent control virus did not always cause clinical disease with characteristic symptoms when infected subcutaneously. The purpose is to develop a biological model in the form of a complex consisting of a pathogenic virus, a method of infection and a susceptible animal to assess the immunogenicity of a lumpy skin disease vaccine. Local cattle, intact from lumpy dermatitis, were used to reproduce lumpy dermatitis and develop the causative agent of the disease. As the initial infectious virus, we used a 20 % tissue suspension of nodules (skin nodules) obtained from cattle that fell ill with lumpy dermatitis in the field in the Atyrau region in 2016. As a viral mass to control immunogenicity, a 20 % suspension of skin nodules and edematous skin tissue at the site of the pathogen injection, obtained after the “refreshment” of the virus in animals, were used. The disease was reproduced by infection with the test suspension of the virus intradermally, subcutaneously, intravenously at a dose of 0.5 cm3 and titration on the skin of the animal. The effectiveness of the biological model was assessed by morbidity, severity of the course and severity of the manifestation of the disease. During primary intradermal infection with a field isolate of the virus, the disease manifested itself in one of three animals in the form of hyperthermia, depression, lacrimation, and the appearance of several nodular nodules in the skin of animals. The refreshed tissue virus caused clinical disease both in subcutaneous, intradermal and intravenous infection. But the clinical signs of the disease were more pronounced with intradermal inoculation of the virus, and with intravenous inoculation, it manifested itself in a more severe form with a fatal outcome. Inoculation of the virus intradermally into different areas of the skin led to the development of an independent skin lesion in each infected point in the form of painful edema, followed by necrosis, the size and intensity of which depended on the dose of the injected virus. This development of skin pathology made it possible to work out a method for determining the virus titer in vivo. The tissue virus obtained from the edematous tissue at the site of the pathogen injection was guaranteed to cause clinical disease in cattle during intradermal inoculation and made it possible to evaluate the immunogenic efficacy of the produced batches of vaccine against lumpy dermatitis.

Main problem: in conditions of increasing competition, when characterizing commercial structures, a fundamental role is given to innovations, which occupy important place in economic life of the organization. Accordingly, the study of their essence and content is of particular importance for growth of competitiveness of organizations, which determines the relevance of study. Purpose: to investigate essence of innovation and innovation process in retrospect and in modern conditions as main prerequisite for improving competitiveness of commercial organizations. Achieving this purpose required solving following research tasks: to reveal the content of theoretical approaches to the study of the main aspects of interaction between business and government in modern science; the differences between the concepts of “novelty”, “know-how”, “innovation” are investigated; the relationship of the triad of concepts “novelty”, “know-how”, “innovation” is determined; concept of “innovation” has been studied in retrospect; concept of “innovation” in market economy is studied (foreign experience); approaches to definition of concept of "innovation" in international innovation theory and practice are defined; content of innovation process is presented, as well as author’s alternative scheme of innovation process; authorэs view on interpretation of concepts of “innovation”, “innovation process” in modern conditions is presented. Methods: theoretical and methodological basis was concepts, hypotheses and theories presented in works of domestic and foreign researchers. The methodology is based on systematic approach, within which methods of comparative, factorial, subject-object, structural-functional, statistical analysis and extrapolation have been applied. Results and their significance: article examines concepts of “innovation”, “innovation process” in retrospect and in modern aspect. Approaches to concept of "innovation" are systematized, an alternative scheme of innovation process is proposed. It is proved that in modern conditions innovation should be considered as process system reflecting all aspects of innovation process, main purpose of which is to achieve efficiency

The process of creating new forms is the key to choosing the combination of different textures for a unique aesthetic effect. Currently, various elements of the interior, including furniture and other decorative additions, are the basis for obtaining emotional balance, which is achieved between the functional purpose of the interior and its artistic and figurative concept. The main task in creating such objects is to create the most comfortable and harmonious atmosphere in the interior, regulating the mental processes of a person, which would cause exceptionally positive emotions and stimulate the creative development of users. The purpose is to consider the features of the use of epoxy resin in the design of interior objects and to study the importance of synthetic resins as a modern material for new ways of shaping in interior design and decoration. The methods used are: the use of formaldehyde resins as a modern, affordable, multifunctional material, the combination of resin with coloring and the use of various textures. Expansion of the range of interior elements in the manufacture of which epoxy resin is used. In this regard, it should be noted that the use of various resin compositions when creating design objects meets consumer requirements and complies with modern and latest trends. In this article, a brief study of such a polymeric material as epoxy resin was carried out. The properties of epoxy resin and how they affect the compositional solution, methods of its modification, and functional aspects of design from the point of view of manufacturing interior elements are described. The technologies for manufacturing modern products for decorative and applied purposes coated with epoxy resin are considered. In the process of researching technologies, a series of experiments are carried out to determine the structure of possible sequential actions, within which a technology will be studied and designed to ensure the safety of a new design product made of synthetic materials, then a constructive logic will be provided in which not only the functional properties of the object will not suffer, but also acquire valuable innovative value

Main problem: the article is devoted to the issue of designing basic recipes for dairy products using mathematical modeling methods. The author analyzed the problems in the field of food technology and concluded that mathematical modeling is used in the following areas: clarification of technological process modes, designing recipes and assessing the quality of finished products, as well as predicting the shelf life of new products when they are put into production. The use of dihydroquercetin as a drug that prevents the oxidation of milk fat in the design of dairy products is substantiated. Mathematical modeling was carried out on the basis of experimental and analytical material obtained in laboratory and production conditions. Based on the maximum value of the objective functions, the optimal normalized mixtures and the maximum allowable concentration of dihydroquercetin were selected. The analysis of the received mathematical dependences and models is carried out, the system of linear equations is made. Purpose: to study the effect of natural bioflavonoid antioxidant on the oxidative processes of milk fat and the viability of lactic acid cultures and their associations by mathematical modeling in order to use it in the technology of a new product; conduct an analysis of mathematical dependencies and models, compose a system of linear equations. Methods: the article uses the method of mathematical analysis and the matrix method. Results and their significance: a mathematical model was developed for the dependence of the viability of probiotic cultures on the mass fraction of dihydroquercetin when designing recipes for a creamy-protein curd product, a matrix of the chemical composition of dairy ingredients was presented, and a system of linear equations for basic recipes was compiled. In the course of the study, the spatial configurations of dihydroquercetin, as well as its effect on the oxidative processes of milk fat, were studied. Mathematical modeling of experimental data on the study of the effect of dihydroquercetin on the viability of microorganisms with probiotic properties was carried out. The normalization of the complex of obtained results on the study of the influence of the mass fraction of dihydroquercetin on the fermentation process was studied. Controlled factors characterizing the process of fermentation of model media with dihydroquercetin have been determined. A rationing of the dihydroquercetin complex of more than 0.50% was established; the target function decreases to its minimum value of 0.53 with a mass fraction of dihydroquercetin of 1.00%.

In the dairy market of Kazakhstan, the demand for mass-produced dairy products is decreasing and expanding to innovative fermented milk products for functional nutrition. The main feature of the new technology is multicomponent formulations, which include the main raw materials and biocorrectors, ensuring their high biological and nutritional value. New dessert products are prepared on a dairy or protein basis using vegetable ingredients, fermented with strains of dry starter cultures of direct application or immobilized starter culture Bifimm probio. The purpose is to apply immobilized living cells of pure cultures of lacto- and bifidobacteria as a biocatalyst for the fermentation of dairy-vegetable media. During the study, the method of immobilization of microbial cells in biopolymer gels was used. The most effective method is the inclusion of cells in an aqueous solution of biopolymers with a concentration of 25 %. For immobilization, pure cultures of lactic acid and bifidobacteria were selected in the gel as part of the concentrates "BK-Altai-LS Bifi", "Poleznaya Partiya", "Genesis", "Narine", "Bio-yogurt Vivo", and the main prescription ingredients were selected: milk with a mass fraction of fat of 1 %, 2.5 %, 3.2 %, natural grain additives, jams, juices, nuts. Formulations, technological schemes and production methods, prototypes were developed, quality and safety indicators were determined. Studies have shown the effectiveness of immobilized starter cultures in the formation of fermented dessert products. Out of 20 prototypes with the best indicators, 5 samples were selected, in which the optimal ratio of milk, probio Bifimm starter cultures and biocorrectors averaged 70:20:10. The quality and safety analysis showed that new fermented milk products using immobilized starter cultures have a positive effect of more than -70 % compared to direct-use starter cultures, have functional properties and can be used for healthy nutrition in Kazakhstan.

It is known that the nutritional value of proteins is primarily characterized by the composition of essential amino acids and is determined by their accessibility. Not just proteins are necessary for the good functioning of the human body, but a certain amount of essential amino acids. Since the lack or absence of any of them causes serious health problems. The problem of protein malnutrition is global for many reasons and to solve it, it’s necessary to study the prospects for the possible use of non-traditional sources of dietary protein, namely vegetable protein. Considering this, the article presents the results of studies conducted over several years, the objects of which were dairy and vegetable products and protein hydrolyzate from chickpea flour. At the same time, the possibility of its use as a filler of plant origin to improve the physicochemical and structural-mechanical properties of a new type of finished product was determined. The purpose of these studies is to develop a recipe and determine the technological stages of production of a new type of product of dairy and vegetable origin, which has a functional focus, in which vegetable products are used together with dairy components. It should be noted that when selecting components, preference is given to raw materials grown in the local region. When developing the recipe, the optimal amount of chickpea protein hydrolyzate to be added was determined, which makes it possible to give the finished product not only attractive commercial characteristics, which the modern consumer primarily pays attention to, but also to obtain such product properties that will help strengthen the immune system and the resistance of the human body to adverse conditions environment, what is especially important for the younger generation. When developing the technology of a new dairy-vegetable curd mass, the optimal modes of each technological operation and the stage at which it is most expedient to apply a vegetable component are determined. Launching the developed product into production, the manufacturer will not face the problem of the lack of the necessary equipment and its expensive acquisition, since the production organized according to the proposed technology is maximally adapted to the equipment available at enterprises engaged in the production of cottage cheese and curd products.

Main problem: the development of a new direction in the food industry – the so-called functional nutrition, which means the use of such products of natural origin, which, when systematically used, have a regulatory effect on the body as a whole or on its specific systems and organs, has been widely recognized all over the world: immunostimulants, biocorrectors for blood pressure, cholesterol levels, etc. When creating functional dairy products, ingredients of plant origin are increasingly included in recipes, which are sources of dietary fiber, vitamins and microelements, organic acids and other biologically active compounds, which can also serve as flavor fillers. Purpose: to develop a technology for the preparation of a fermented milk product with the addition of an extract from gourds. To do this, it was necessary: to select the amount (dose) of the yoghurt starter introduced into the prepared milk, and also to investigate the effect of temperature on the fermentation process of the drink; to investigate the amount (dose) of the vegetable filler introduced into the mixture and its effect on the organoleptic characteristics of the drink; to investigate the organoleptic properties of the drink with the melon culture extract added to it before fermentation and after fermentation; to investigate the effect of vegetable filler on the fermentation process; to investigate the effect of the dose of vegetable filler on the process of acid formation; conduct microbiological studies of milk and vegetable yogurt; to investigate the change in the acidity of milk and vegetable yogurt during storage; to investigate the effect of the freezing process on the chemical composition and biological value of the extract. Methods: when performing the practical part of the work, physicochemical, organoleptic and microbiological studies were used. Results and their significance: in the course of the study, it was concluded that by adding an extract of gourds to the technology for the preparation of fermented milk products, a new fermented milk product can be obtained that meets all physicochemical, organoleptic and microbiological requirements. As a result, an original method for the production of a fermented milk drink containing an extract from a melon culture was developed.

Main problem: achievement of socio-economic sustainability in each locality depends on coordinated actions of executive and representative authorities, which should be focused on creating appropriate conditions for ensuring social standards and improving quality of life of rural population, as well as the development of main economic basis – agricultural production. In this context, in today’s reality, the urgent problem of sustainable development of rural settlements is provision of appropriate industrial and social infrastructure, because systemic development of rural regions depends on this rural infrastructure, which acts as an element of territorial socio-economic subsystem. Purpose: identification and studying of key factors that determines and contributes to balanced development of industrial and social infrastructure of rural regions of country in context of sustainable development goals and objectives. According to the results of the study, the main distinctive features of sustainable development of rural areas are determined due to the provision of industrial and social infrastructure of rural regions, which has a correlation with the level and quality of life of the rural population, as well as the final results of agricultural production. Methods: general methodological principles, systematic approach and empirical methods of economic cognition act as methodological basis for implementation of this study: economic and statistical models, forecasting and modeling, methods of induction and deduction, synthesis, and also logical methods. Results and their significance: results of research can be used as a practical basis in activity of local executive bodies and local self-government bodies. Their use is possible for scientific substantiation of development and implementation of comprehensive plans for development of industrial and social infrastructure of rural areas of region within framework of Regional Development Plan, focused on qualitative improvement of economic basis of villages and the well-being of all segments of rural population.

The present stage of development of power systems is characterized by the need to increase their intelligence, that is, the formation of an environment capable of solving the problems of effective management of all components included in the power system. One of the features of modern energy systems is an active consumer, that is, a consumer who has the opportunity to optimize the schedule of loading their capacities, planning energy consumption, intellectualization of energy consumption. In addition to the fact that there are digital systems for collecting, processing and presenting information, as well as transmitting this information via the Internet, to solve the most difficult task of managing power systems, it is necessary to develop a large number of models adequate to real processes that can describe the processes taking place in the power system under consideration. The purpose is to develop models capable of adequately describing the interrelated processes occurring in the considered elements of the power system, as well as in the aggregate of related elements; development of methods that allow solving problems of effective control of elements of energy systems on the basis of the proposed intelligent models. To solve the problem of increasing the intelligence of the power system, nonlinear adaptive models of electrical complexes of an energy-intensive enterprise included in the power system were developed on the basis of balance equations and artificial intelligence methods. The production of alumina with the properties of inertia, nonlinearity and closure is chosen as the production under consideration. This type of production was chosen as the most difficult to predict due to the unpredictability of changes in energy consumption during the transition to other modes of its operation, associated, for example, with the receipt of raw materials with a different chemical composition for processing. Static and dynamic models of energy consumption of electrotechnical complexes with continuous inertial nonlinear closed production based on artificial intelligence methods have been developed, which makes it possible to eliminate the need to use long time series of retrospective data. For the considered type of continuous energy-intensive production, dynamic characteristics of energy consumption and technological processes are obtained from the main controlled parameters, which make it possible to predict emergency situations and partly man-made disasters. On the basis of a genetic algorithm, a multiparametric optimization problem of energy management of continuous production has been solved, taking into account technological parameters and cost factors.

The article is devoted to the study of the main types of retort packaging, as well as polymer and combined materials used for its manufacture. The authors have compiled a classification of retort packaging presented on the modern market, investigated the technological properties of packaging materials, and also determined the requirements for modern retort packaging: resistance to sterilization at a temperature of at least 120°C, steam and moisture resistance, chemical inertia to canned products, tightness, low gas permeability. It has been established that in order to give the retort packaging the required properties, it is made of multilayer polymer or combined materials, each of the layers of which performs certain functions. It is determined that due to the barrier properties of polymer and combined materials with respect to oxygen, retort packaging provides shelf life of canned products up to 5 years, which allows the use of retort packaging made of polymer and combined materials as an alternative to glass and metal packaging. In experimental studies, the composition of the outer layers of modern retort packaging was analyzed and it was concluded that polypropylene or polyethylene terephthalate are most often used, since these polymer materials are thermally and chemically resistant, vapor- and moisture-proof. It is established that materials that are barriers to gases are used as the middle layer – aluminum foil, metallized films, ethylene vinyl alcohol, polyamide. It is proved that polymer co-extrusion, multilayer injection molding or lamination is used for the manufacture of such materials and packaging. The data obtained indicate the high barrier properties of combined packaging materials, therefore, the thermal and chemical stability of the polymer and combined materials used makes it possible to use retort packaging for packing almost all groups of canned products.

Main problem: the article substantiates the relevance of the development and production of specialized food products for athletes and the population involved in sports, fitness as part of a healthy lifestyle. Purpose: development of specialized food products with a general health-improving character, intended for the population involved in sports, fitness and experiencing increased physical exertion. Methods: the obtained results were statistically processed using the methods of correlation and regression analysis and standard software packages "Statistica 6.0". Measurements of chemical, microbiological, organoleptic parameters were carried out using standard methods and modern instruments: an analyzer, an analytical analyzer electrophoresis cell, a high-performance liquid chromatograph, and others. Results and their significance: a scientific concept for the creation of fermented specialized milk-based food products for sports nutrition was formulated; biotechnologies for specialized food products for athletes were developed. For the practical implementation of the results of analytical and experimental studies, packages of regulatory and technical documentation for the production of new products have been developed, which have been tested in the production conditions of existing enterprises in the dairy industry.

The article contains the results of a research work devoted to an important problem - the development, production and delivery to the consumer of fermented dairy products of a healthy diet fortified (enriched) with milk protein, a vitamin-mineral complex, and probiotics and prebiotics. Purpose is based on mathematical modeling of experimental data, to determine an effective fermented food system for use as the basis of a fortified (enriched) curd product for a healthy specialized diet; to develop a recipe and technology for its production; to study the nutritional, biological and energy value of a new product. Modern technologies and equipment were used in experimental studies: ultrafiltration, fortification, etc. The studies were carried out by standard physicochemical, microbiological methods in three to five repetitions. Mathematical and statistical processing of experimental data was carried out using the program "Statistica-6.0". A recipe and technology for the production of a curd product for a healthy specialized diet has been developed. Its nutritional, biological and energy value has been studied. The developed recipe and biotechnological parameters for the production of the curd product were tested in the industrial conditions of the leading enterprise JSC "Lyubinskiy MKK". The quality and safety of the curd product was studied in the laboratory of techno-chemical control of FGANU "VNIMI" (Moscow).

In this article, comprehensive studies have been conducted on the rational use of natural pastures, taking into account the seasons and typology, which allows increasing the grazing capacity of forage lands, as well as obtaining high-grade valuable and cheap livestock products. Rational maintenance of livestock on pastures not only reduces fuel costs by 6-7 times, equipment, labor and total feed costs by 2-3 times compared to the content of grazed animals, but also improves metabolic processes and reproductive functions of animals. This determines the great advantage of pasture feeding in the production of important livestock products. In the conditions of vertical zonality of the Zhambyl region, a significant reserve for increasing the production of mutton is their grazing on pasture with the use of pasture turnover; which allows the most efficient use of natural forage lands, increase the live weight and fatness of animals.

Increasing the yield of sunflower is inextricably linked with the evaluation of newly created interline hybrids and their components (parental forms) using various methods for assessing their combination ability (CА). Breeding research in this direction includes large material and practical costs when using the developed methods for assessing combination ability (CА) due to its small analytical capabilities. New approaches to the analysis of the productivity of hybrids in practical studies can significantly increase the volume of the analyzed material and evaluate not only for a short period of testing, but also for a long period of time over the years. Purpose is determination of the combination ability of parental forms of sunflower interlinear hybrids to optimize the breeding process. When analyzing the determination of the combination ability of the parental components of sunflower interlinear hybrids, the method of evaluating the CА according to a special scale developed at VNIIMK (Krasnodar, Russia) was used. This method makes it possible to analyze a large number of hybrid combinations and their parental forms and draw appropriate conclusions for further use in the breeding process. The analysis of the obtained results makes it possible to fully evaluate the obtained interline hybrid combinations by years of testing. We analyzed 1736 hybrid combinations involving 212 maternal forms and 1472 combinations involving 209 paternal pollen fertility restorer lines. 75 maternal lines with a high total combination ability (GCА) and 97 paternal forms with this trait were identified. Maternal lines with high combinational ability VKU 110 A, VKU 140 A and SV 55 A are of interest for use in practical breeding. Among the paternal forms are SV 123 V, VKU 400 V and VKU 401 V. The components of hybrid combinations with high specific combination ability (SCА) have been determined. These are lines VKU 414 A, VKU 413 A, SV 31 Rf, SP 1459. Hybrids with high adaptive properties have been identified when growing conditions change, which will make it possible to purposefully conduct practical breeding to maintain high productivity of sunflower hybrids

The article highlights the problem of coping behavior of students in stressful situations of the educational process. Purpose of the article - determination of the dominant productive and non-productive strategies of coping behavior among undergraduate students. While doing research the following methods were used: Coping with Stress Questionnaire (COPE) by K. Carver, M. Scheier and J. Weintraub, adapted by E.I. Rasskazova, T.O. Gordeeva and E.N. Aspen. Fourth-year students show significant variability in the choice of methods of coping behavior. This means they have a wider range of coping strategies. At the same time, first-year students do not have a diverse enough range of coping strategies. This may be due to their less experience and unfamiliarity with various coping techniques. Significant differences were found in the activity of using the effective strategy “Finding a solution to a problem” among students at different stages of training. This suggests that fourth-year students are more prone to problem-oriented coping, while first-year students prefer emotionally oriented coping with exam stress. As a result of the study, it was determined that the most common methods of coping behavior among students are the strategies “Accepting responsibility” and “Planning a solution to the problem.” This means that most students prefer active and mindful approaches to coping with difficulties. It has been proven that the relationship between methods of coping behavior and anxiety of students is different in all courses of study. This may be due to varying levels of experience, degree of curriculum difficulty, and other factors that influence perception and coping with stressful situations. These results highlight the importance of developing a variety of coping strategies in first-year students, as well as the need to support and train fourth-year students in using effective coping strategies.

Discovering the intellectual and professional abilities of special children, first of all, depends on the language environment created by teachers. In this regard, the task is to create an effective pedagogical paradigm of thinking and activity (concepts, categories, concepts), ensuring its constant updating. Purpose of the research is revealing the intellectual and professional abilities of special children. The main research methods are ascending from the abstract to the concrete, descending from the concrete to the abstract, from the concrete to the abstract and again to the concrete, from the abstract to the concrete and again to the abstract and method of working with text. Between 80 and 85 % of incoming information is perceived by the human visual organs, and our brain performs several functions. The main function is speculation, i.e. in understanding the essence, knowledge embedded in information. For example, a person can observe a rainbow, without understanding or knowing its nature. Only speculatively can he cognize the essence, i.e. a certain law, a scheme for the origin of this unusual phenomenon. Thus, knowledge is a product of a person’s own thinking, extracted from information.

The article is devoted to the development of technological parameters for the production of gluten-free pasta, as well as to the study of the influence of physico-chemical factors on the formation of the structure and organoleptic parameters of gluten-free pasta. The authors studied modern approaches to the production of gluten-free food in Kazakhstan. During the study, the main types of raw materials used in the production of gluten-free pasta of functional orientation were identified. For the production of a new product, a reasonable choice of raw materials and functional ingredients was carried out, the formulation and production technology were developed, all temperature and time modes were described, physico-chemical, organoleptic parameters of the new product were studied, a production flowchart was developed. The purpose of the article is to develop the technology of gluten-free pasta enriched on the basis of corn, rice flour and meeting the requirements for specialized food products, with the addition of functional and flavoring ingredients to expand the range of gluten-free products in the Republic of Kazakhstan. In experimental studies, the formula of a new gluten-free paste based on rice and corn flour with the addition of flaxseed flour, soy protein isolate «EdimCo», xanthan gum, dietary fiber (psyllium), Supermak booster was developed. The complex results of organoleptic and physico-chemical parameters of whole-grain flour for the production of new gluten-free pasta are presented. The results of organoleptic and physico-chemical indicators, as well as safety indicators of finished gluten-free pasta are presented. The article presents the technological parameters and time modes of the production process of fresh pasta, including the following basic operations: preparation of raw materials at t = 10 0C, kneading pasta dough at t = 40-45 0C, vacuuming at 40-10 kPa, pressing (extrusion) at 7 min, 10-12 MPa, drying and stabilization at 10-12 MPa, cooling of dried products t = 20-25 0C 4 hours, packaging of finished products at t = 35 0C and relative humidity 70 %.

Development of regulatory and technical documentation for the examination of equipment operating under pressure

Main problem: the globalization of the information sphere has led to a significant increase in the volume of stored and processed information. To increase the processing speed and provide information to the recipient, it is logical to increase the power of the equipment on which the information is processed. But such a path also leads to an increase in financial costs for continuous modernization or complete updating of computer equipment and application software. Purpose: an alternative solution to increasing the capacity of hardware and software may be to optimize the process of organizing data storage, and already at the stage of information analysis. At the initial stages of the task, a huge amount of information is collected and processed, which needs to be classified, to identify essential and non-essential information flows for the information system being developed, etc. The quality of functioning of the developed information system as a whole and its individual modules in particular will depend on how correctly and fully the structuring and systematization of data will be carried out. Methods: modern methodologies of conceptual design of information systems shift the emphasis from software implementation to analysis and modeling of the production environment. The tools used in the process of conceptual modeling allow you to automate the main part of the processes, including the development of program code in the format of templates (patterns), including the preparation of documentation for the software product being developed. Since modern methodologies and tools are based on the use of powerful graphical tools, this significantly increases the visibility and simplifies the process of making adjustments to the information system project, actually using the "Drag-and-Drop" technology. This allows you to redistribute the time spent on the implementation of the first stages of information system development, allocating more time to the analysis and design of the software environment at an abstract, conceptual level. Results and their significance: the stages of analysis and design do not require large financial costs and are more variable. Information at these stages is easier to adjust and change than, for example, at the stage of writing program code. In addition, it is at these stages that the most active interaction between the developer and the customer is carried out, where maximum visibility and variability of the project of the future information system is required. And the use of modern software design methodologies significantly increases the efficiency of the first stages of information system design.

The article is devoted to the development of technology for meat products of the "Halal" category. The authors consider the main problems of the meat industry in the field of the development of meat products of the "Halal" category in accordance with the National Program "Development of meat farming for 2018-2027", as well as the peculiarities of the production of meat products of the "Halal" category in Kazakhstan. A technology for the production of sausages for frying of the "Halal" category based on minced turkey and beef meat for functional nutrition has been developed, organoleptic, physico-chemical parameters of the new product have been studied. The mass fraction of protein is 8 %, the mass fraction of fat is 7 %. The authors of the article have developed a technological scheme for the production of a new product of the "Halal" category, which includes: acceptance of raw materials, cutting, deboning, veining, grinding to 2-3 mm of meat raw materials. At the next stage, meat is cooked at t 2-4 0C for 12 hours, minced meat is prepared (adding jerusalem artichoke 3 %, adding vitamin premix "Rovifarin" in an amount of 1.0 %, as well as spices and garlic according to the developed recipe). At the next stage, the minced meat is stuffed into natural shells with a diameter of (32-44) mm, cooled at t (4 + 2) 0C, stored at t (4 + 2) 0C for 36 hours. During the microstructural study of a sample of boiled and smoked sausage produced using traditional technology, it was found that the mass of the sample was formed from large fragments of muscle, fat and connective tissue (0.7-1.4) microns. The layout of the structural elements of the minced meat is dense, vacuoles and microcapillaries are rounded in shape, sometimes without clear boundaries, merged, with a size of (60-300) microns.

The development, grovth and productivity of livestock depend primarily on providing it with a variety of nutritious feeds. Daily feeds should consist of microbiologically synthesized protein, as well as a variety of seeds, mineral and vitamin supplements of animal and vegetable origin. Indeed, the maximum disclosure of the genetic potential of livestock largely depends on both the quantity and quality of feed. One of the stages of feed quality assessment is the measurement of their chemical composition. The chemical composition is not always constant and depends on many factors, including the species composition of plants, fertilizer application rates, climatic conditions and storage methods. The least accumulation of moisture in the soil was observed in areas where pasture grasses were regularly treated with wormwood. Pacture productivity was also the lowest in the control plots, where the average phyto-chemical composition over three years showed that the dynamics of protein content was the same in all pastures – the protein content reached a maximum at the beginning of the growing sea son and decreased from spring to autumn, while the lowest content of crude protein during harvesting in summer was in control plants of varieties

Main problem: In recent years, the world has seen the widespread impact and implementation of digitalization in all areas of activity. The financial sector is increasingly feeling the impact of this trend. Today, banks are the leaders in this sector in the use of digital innovations. In connection with current events in the world, banks needed to resort to transformation of their products. Products and services such as Internet banking, chat bots, contactless payment systems, biometric identification technologies, etc. appear and are constantly updated. The article discusses the main trends in the development of digital banking products and their impact on the performance of banks. Purpose: is to study and evaluate new digital banking products and their impact on the key performance indicators of the banking sector. Results and their significance: The directions and trends in the development of new digital banking products were studied and the performance indicators of the banking sector of the Republic of Kazakhstan were compared.

Main problem: At the present stage of life, workforce plays a special and very important role in the activities and development of any organization. Human resources need to be managed. Management itself is a process of streamlining, regulating a particular activity. Managing an organization means defining the main directions of its development, setting goals for it and contributing to their achievement. Human resources are the face of a company, a component derivative, without which its existence is impossible. Any promising and self-respecting company assigns the formation of its staff to one of the leading directions of its own policy. Currently, in the context of social and economic transformations, the management of the activities of healthcare organizations is changing significantly, and therefore it is necessary to improve personnel management approaches that contribute to improving the quality of services provided and labor productivity. Taking into account the peculiarities of personnel management of a medical institution at the present time, the issue of reforming the personnel policy of healthcare, improving the image of institutions, forming a corporate culture, developing and implementing criteria for the motivational process is acute. Solving these tasks will help managers in the personnel management process. Purpose of this article is to assess the state of human resources of organizations of the sanitary and epidemiological service in the Republic of Kazakhstan and identify the main problems in the personnel management system of the organization using the example of the activities of the State Institution “Committee for Sanitary and Epidemiological Control of the Ministry of Health of the Republic of Kazakhstan”. Methods: The work used general scientific methods of comparative systemic, vertical and horizontal analysis, structural and functional the method, analytical techniques, economic and statistical research methods. Results and their significance: the authors have defined the human resource management system of a healthcare institution, analyzed the current personnel management system using the example of the State Institution “Committee for Sanitary and Epidemiological Control of the Ministry of Health of the Republic of Kazakhstan”. The assessment of the state and movement of labor resources of the Sanitary and Epidemiological Control Committee was carried out. Based on the conducted research, the authors identified the main problems of human resource management of a healthcare institution and developed proposals that can be used as recommendations for further reform and development of the personnel management system in the healthcare sector.

Main problem: One of the priority directions for improving the management system at the enterprise is the organization of effective interaction between strategic and operational management through the formation of a mechanism for their interaction, orienting operational management to achieve strategic goals and objectives. In market conditions, issues of interaction between strategic and operational production management are particularly relevant, allowing solving complex economic problems of the enterprise related to the rational use of resources involved in production, reducing production costs, improving the quality of products, optimizing production potential in order to increase the efficiency of the entire enterprise as a whole and its structural divisions. The role of the mechanism of interaction between strategic and operational production management also lies in the possibility of coordinating those final strategic goals that the enterprise strives for with the actual internal production capabilities. The purpose of this article is to study the issues of interaction between operational and strategic management of an enterprise in a market environment. The theory and modern practice of production management in a competitive environment show that the implementation of operational production management is a natural stage in the implementation of strategic management, therefore, there is a close relationship between them, which manifests itself in their interaction. Methods: The methods of analysis and generalization, the method of systematic and comparative analysis, structural and functional method, economic and mathematical methods, graphical and tabular method were used in the work. Results and their significance: the authors consider the theoretical aspects of the relationship between strategic and operational production management at an enterprise in a competitive environment. There is a low level of compliance of operational tasks of production with the strategic goals of development of domestic enterprises and the special role of information systems designed to link operational and strategic management tasks together. Accordingly, the key aspects of information technology implementation are investigated, including the need for employee training, strategic communications planning, information flow management and the use of data analytics. Examples of successful application of information technologies in various industries and organizations are given.