The development of the oil refinery is directly related to the peculiarities of the socioeconomic environment, which is determined largely by the favorable conditions of activity of all branches of economy of the Republic of Kazakhstan, a stable regulatory processes of all normative -legal framework of implementation of market reforms and efficiency of making management and innovative solutions in the oil refining industry of the Republic of Kazakhstan. Currently, a lot of efforts are being made to scale modernization of all production processes, as well as modernization of equipment of the oil refining complex of the country

This article describes the methods of your household waste disposal and obtaining of plastics based on styrofoam dissolved in gasoline.

The article describes intensification methods of the anaerobic digestion process, contributed to the enhancement of biogas installations productivity. Microbiological and constructive-technological methods of anaerobic digestion process intensification are analyzed, their advantages and disadvantages are pointed out.

The article provides the analysis of the existing heatinsulating materials and the experience of using modern heatinsulating materials for a thermal protection of power boilers.

Theoretical aspects of preschool children speech development by means of theatricalization are highlighted in the article which is understood by the authors as purposeful pedagogical activity providing effective learning of mother tongue vocabulary. A number of games classifications are analyzed that make up the theatrical activity. Emphasizing that the theatrical activities can be organized in different areas of work with children of preschool age the authors reveal issues of these areas.

This article discusses some of the problems of chemical safety, such as the recycling of waste production, chemical accidents and disasters, environmental pollution and the negative effect of the chemical industry on human health, as well as methods for safer handling of chemical products.

The article considers the methods of rationalizing the process of heating the refractory materials of aluminum electrolyzers up in relation to thermal stresses arising in the hearth lining. The functional goals of the refractory materials are listed. The operational characteristics of the refractory materials are presented. During thermal influence on a hearth lining, the physical effects called thermal expansion occur. The materials which save their properties under high temperature are known as refractory materials. The thermostability is described in more detail. The scientific test bench was used to investigate ultimate strength. The method of temperature and pressure measurement when conducting the experiments is cited. In order to choose the potlining it is necessary to know the peculiarities of refractory materials and actual industrial loadings as precisely as possible.

The results of the analysis of influence of some main process factors on heat conduction of heat-insulating materials are given in this article. As major factors were considered: density, temperature, humidity. Researchers are conducted on the basis of the theory of planning of experiment. The got dependences of heat conductivity on a closeness and temperature of material show approximately equal influence of these factors on the exit of experiment

In this article issues of efficient use of ferroalloys production waste to save costs are considered; energy efficiency of agglomerate production is calculated; sintering heat balance data are presented by a case study of Aksu Ferrolloy Plant. According to the annual economic benefits calculation the folowing results are obtained: due to аglogases recirculation, fuel saving is 1334.5 t.o.e.; due to reheating it is 1491 t.o.e.; due to installation of thyristor converters to the unit the annual energy saving is 1714000 kWh. Thus, it is identified that besides energy-efficiency measures during recycling of solid and gaseous wastes, the use of agglomerate increases IPF electric furnaces performance as well, decreases specific energy and reducing agent consumption which means the prime cost of finished products will be reduced.

One of the directions of energy saving is the application of heat pumps by means of which it is possible to use low-potential, usually waste heat. The question of the possibility of using heat pumps in thermal power plants is considered in the present article. Also a diagram of possible use in thermal power stations of low-grade waste heat with heat pump installation is presented in the article.

The method of integral transformations is used to study the process of bodies heating and cooling. As a result of theoretical calculations the regime of soil freezing depending on the ambient temperature was established. Laplace transformation is practically used to determing patterns temperature of constructed concrete dams, building grounds

This article discusses some of the practical application of cavitation technologies in autonomous heating systems, attached elementary economic calculation. The modern achievements and cavitation vortex heat generators, principle of operation and types of such equipment. Marked positive and negative aspects of installation and operation of heat generators. A comparative analysis of the economic calculation of seasonal operating costs of the vortex heater as auxiliary heating systems and district heating tariffs for Pavlodar.

This article discusses the use of ash and slag waste such as ash or slag boilers and thermal power plants of Pavlodar region. We describe the main source of energy today. Produced by laboratory analysis of the composition of the ash. A basic installation for the processing of the ash. It presents the possibility of using fly ash in building materials industry.

The paper presents the thermal design of the building heating system of a four educational building № 1 Eurasian innovative university.Data are presented for the period from 1 December to 28 February for three seasons: 2013–2014, 2014–2015, 2015–2016 years. On the basis of the actual thermal design graphics and design of heat were built in the period from 1.12. at 28.02 for three seasons (2013-2014,2014-2015, 2015-2016 years). In these graphs clearly visible difference between the two values. According to calculation, the average difference was 13.02 % of the actual heat consumption.

This article mainly deals with the role of healthy lifestyle in strengthening pupils` health. The relevance of the issue of healthy lifestyle modeling arises out of the fact that heath is one of the most significant life values of a person and a guarantee of his or her welfare longevity. Currently, due to the low life expectancy of people, it is crucial to foster the meaning of health as the main value in one`s life and importance and necessity of health preservation from the early childhood. Life preservation requires dedicated and persistent efforts from every person. Herewith, it is necessary to understand one fact: life preservation is a personal prerogative. If one is to always be healthy one must remember that it requires persistent, dedicated and considerable efforts. Therefore, it is crucial to have a long course of personal conduct that designates the general culture of our labour and rest management, rational combination of physical and mental workload, sensible nutrition, active leisure and good quality sleep, and, moreover, skills of safe conduct in different dangerous emergencies. All of it composes the system of healthy lifestyle.

This paper presents a biotechnological approach of making a meat product in order to create a new domestic product. As the result of the study, prescription composition of the meat product with a cereal component was developed. Components comprise raw materials of domestic production, which allows to increase the level of nutritional balance of the product. The prescription composition includes secondary raw materials, and that allows manufacturers of processing industries to use non-waste production. This characteristic has been achieved due to the know-how. Secondary raw materials have nutritional value, but because of its features (coarse fibers) they are poorly digest by the body. The developed know-how ensures that these fibers are transformed into easily digestible form, giving the product special characteristics, which are described based on the results of nutritional value of the newly developed type of product. The developed new product allows to expand the range of meat products on the market.

This article is devoted to the consideration of methods for receiving copper powder. The main methods of obtaining copper based on them are analyzed, the possibility of complex extraction of the investigated metal from spent solutions (wastes) of electrolytic production of copper.

The article describes visually detectable anomalies in the structure of the crucian carpet, which make it possible to consider them as a reliable tool for operative ecological monitoring of aquatic ecosystems under the conditions of the anthropic press. The results of the conducted studies were tested in the course of the research "The Post-Mercury Control of Mercury Pollution in the Territory of the Former PO" Khimprom", and also appear to be important in assessing the environmental risk from groundwater pollution and adjacent water bodies in the northern industrial zone of Pavlodar.

The variants of the use of carbon as a heat-generating material in the agro-industrial complex are highlighted. This will significantly save energy, improve the environment, reduce the cost of operation, repair and maintenance of buildings and structures.

The technogenic impact on the ecological environment led to a decrease in the amount of natural food consumed and a change in its qualitative composition. The article discusses the innovative direction – enrichment of food with micronutrients. New types of bread with functional properties for mass nutrition are developed.

Evaluation of the output of lime is made for three options for the use of Ferroalloy gas: when you use the physical heat of the gas; when using the chemical energy of the gas and the location of the reactor after scrubbing; when sharing of sensible heat and chemical energy of the gas. As a result of the calculation of the expected yield of lime, it was found that the use of Ferroalloy gas for the production of lime can fully provide or at least compensate for the deficit of lime in the production of steel. The technology of calcination of limestone with Ferroalloy gas is presented in the form of a cycle synchronized with the smelting of steel, including, in accordance with the gas outlet from the layer and their alternation with pauses of inter-blowing periods. The preliminary technological characteristics of firing obtained as a result of theoretical analysis are used for further experimental and theoretical studies.

This article describes the main directions of socio-economic development of Pavlodar region, provides characteristics and dynamics of the main areas and sectors of the region, including the state of industrial production, agriculture, development of small and medium-sized businesses, the labor market, trade, electricity, heat and water supply, construction. The region is characterized by a progressive and diversified economic structure. In the structure of industry of Pavlodar region the largest share is occupied by the manufacturing industry. The priority direction of development of the regional economy in the context of ensuring its socio-economic development is the development of small and medium-sized businesses

The object of the study was water and bottom sediments of the lake Balkyldak of Pavlodar region, contaminated by mercury wastes.The purpose of the work is the creation of innovative cost-effective technologies for deep cleaning of aqueous media from mercury to the level of 1-10 parts per trillion, which will be tested for the cleaning of the lake Bylkyldak facilities in Pavlodar region.

Different diagrams of thermal pumps operation at thermal power plants are considered in the article. Thus, installation diagrams are considered for thermal pump based on the use of low -grade heat of turbo-unit lubricating system oil and blow-down water of a steam generator.

This paper presents the results of the influence of ultrasonic treatment in the cofermentation of the cattle manure mixture (cattle) with the leaven from the rumen of ruminants on the process of biogas production. Anaerobic digestion was carried out in matinence periodic operation at the mesophilic temperature of 38 C ̊. As a substrate, a mixture with a content of 70 % cattle manure and 10 % leaven from rumen of ruminants was used. Treatment with ultrasound of the mixture was carried out at an intensity of 10 W/cm2 and an amount of input energy of 9350 kJ/kg of dry matter (DM), which completely eliminated the processes of stratification and sedimentation. Decomposition of organic matter (OM) in the periodic regime with the enzyme and ultrasound treatment occurred within 8 days, the usual substrate during this time OM decomposed 3.0 times less (only 14 %). The process of fermentation of methane in continuous and periodic modes treated with ultrasound, as at other temperatures, was stable, as can be judged by the values of volatile fatty acids (VFA) Volatile fatty acids (VFAs), alkalinity, pH, and biogas. The energetical efficiency of methane fermentation is estimated by comparing the volume of fuel (biogas) and heat consumption for technological needs. As shown by the comparison of efficiency of different regime, the largest amount of commercial energy in the form of biogas was obtained in the mode of joint fermentation of a mixture of cattle manure (cattle) with a ferment from the rumen of ruminants treated with ultrasound – 3 times more than without treatment (space).

Among many environmental conditions that affect a person, the most important factor is nutrition. Today, there is no doubt that there is a direct link between nutrition, health and disease. Proper nutrition ensures normal growth and development of a person, contributes to the prevention of diseases, has a positive impact on life expectancy and creates conditions for adaptation to the environment. A very actual topic for public catering in the Republic of Kazakhstan, namely for fast food companies, is the development of new recipes and culinary products from relatively inexpensive vegetable raw materials, as well as qualitatively new food products with a purposefully changed chemical composition. One of the main ways of solving problems of expanding the production of products for quick service, as well as products for dietary and therapeutic and preventive nutrition is the use of sprouted grains and beans. In this article, poly-grain mixtures of sprouted wheat and extruded soy beans in different ratios are studied and considered. Poly-grain mixtures developed by us are balanced in nutrients, vitamins and amino acids. The research was carried out on the basis of the accredited testing laboratory of RUBICOM enterprise LLP and the scientific laboratory of the Innovative Eurasian University. The purpose of this work is to study a promising method for increasing the nutritional value of grain mixtures by extruding them at different temperature conditions. To achieve this goal, the following tasks were planned: – to study the grain of soy beans and sprouted wheat on the organolepti c characteristics and chemical composition of the poly-grain mixture; – examine the chemical composition of the poly-grain mixture before extrusion; – choose the optimal mode of the extrusion process; – study and analyze the chemical composition of poly-grain extruded mixture; It should be noted that we have developed for the first time the optimal technological mode of extrusion of poly-grain mixture from sprouted wheat and soy beans, and the physical and chemical composition of the poly-grain mixture was studied. The results of the research presented in this paper are the basis for the development of recipes and technologies for fast food products. The reliability and validity of scientific statements is confirmed by the choice of modern methods of chemical composition analysis.

Environmental protection measures are based, among other things, on the rationalization of the organization of the production waste management process. Population growth and the race to industrialize pose a serious threat to the ecosystem. Currently, the average global waste generation per capita is 494 kg / year. A large number of industrial enterprises operate on the territory of Kazakhstan. The range of manufactured products is very wide: household items, transport, building materials, equipment and much more. Each type of production is inevitably a source of a large amount of industrial waste, annually at the enterprises of Kazakhstan up to 600 million tons of waste are generated, three percent of which are recycled. On the territory of Pavlodar region there are enterprises in the field of metallurgy, mechanical engineering, chemical industry, construction industry enterprises, light industry, about a hundred in total. In this connection, the problem of treatment and disposal of industrial waste in Pavlodar region is very relevant. The article discusses the system of waste management in order to reduce their impact on the environment, activities for the disposal, transportation, disposal of waste, as well as their disposal at the industrial waste landfill in Pavlodar. The landfill in question is intended for the reception, temporary storage and disposal of non-hazardous solid industrial waste of the «green» level: waste and scrap of chromium, cadmium, aluminum, copper, lead, zinc, manganese, plastic waste, polyethylene, abrasive, rubber waste, ash and ash and slag waste; and also «amber»: waste containing mercury, arsenic, lead, waste batteries, phosphoric slags, waste oils, oil sludge. The scheme of organizing waste storage works is considered. The volume of accepted and recycled waste, as well as those placed at the landfill and used for their own needs, was analyzed, including construction waste, waste sleepers, ash and slag and abrasive scrap. The solution to the problem of industrial waste disposal is associated with the need for innovation and the introduction of new technologies and equipment.

The article reveals the dynamics of grain production in the Republic of Kazakhstan, grain exports by countries. The author analyzes the grain market (sown area, yield, gross harvest). Kazakhstan has a significant potential for grain exports. Grain exports are important for the country's economy. The country is one of the six largest grain exporters in the world. This is due to the high milling properties of Kazakh grain, the quality indicators of Kazakh flour are highly valued in many countries of the world, which allows Kazakh wheat to be competitive in the world market and provide markets in various countries of the world. The main export destinations are Uzbekistan, Afghanistan and Tajikistan. The article analyzes the main trends in the development of the grain market and gives an assessment of the state.

The main problem: This article is devoted to the key problems of the fuel and energy complex of the Republic of Kazakhstan: 1) lack of production capacity to meet the growing demand for energy and fuel from the economy and the population. Increased demand for electricity and heat, which will require the commissioning of new generating capacities.There is already a shortage in the fuel markets. Modernization and bringing the existing oil refineries (hereinafter referred to as refineries) to full capacity will not allow providing the domestic market until 2030; 2) the export orientation of raw materials, the dependence of the economy on the export of energy resources. In order to attract technology and investment in the oil and gas and nuclear industries, agreements on the extraction of energy resources were concluded with international export companies. In the medium term, Kazakhstan may face a shortage of oil for domestic refineries, if measures are not taken to stimulate its refining within the country. The uranium mined is fully exported; 3) high energy intensity of the economy, low level of energy efficiency. There is a high potential for increasing the efficiency of energy use both in the electric power industry and fuel production, and at the level of final consumption – in industry and housing and communal services; 4) decrease in the replenishment and quality of the resource base in the oil and gas, coal and nuclear industries; 5) low environmental friendliness of technologies used in the fuel and energy complex. Purpose: The purpose of the article is to reveal the problem in the field of ensuring the fulfillment of international obligations between different countries and their own energy sufficiency by gradually changing the structure of energy production. Methods: Studying the experience of increasing the efficiency of the use of energy resources and energy saving as a priority of the state policy of the country. Analysis of production capacity with a constantly forecasted shortage of primary energy resources and insufficient growth of capacity for the production of electricity and heat. Consideration of the possibility of compensating for the shortage by saving energy resources, increasing tariffs for energy carriers, as a stimulating factor for their effective use. Results and their significance: The results of this article will reflect the problems of energy, as the most important driving force of global economic progress. The well-being of the people depends on the state of the country's energy sector, therefore there is an urgent need to solve the emerging problems. The global energy problem is, first of all, the issue of stable and efficient supply of fuel and energy to mankind. Today, the energy sector of Kazakhstan is focused on fuel resources, since the country is provided with hydrocarbons and other energy resources. About 72 % of electricity in Kazakhstan is generated from coal, 12,3 % from hydro resources, 10,6 % from gas and 4,9 % from oil. Thus, the four main types of power plants generate 99,8 % of electricity, while alternative sources account for less than 0,2 %.

Singularly perturbed partial differential equations with small parameters with higher derivatives deserve special attention, which often arise in a variety of applied problems and are used in describing mathematical models of diffusion processes, absorption taking into account small diffusion, filtration of liquids in porous media, chemical kinetics, chromatography, heat and mass transfer, hydrodynamics and many other fields. It is necessary to consider the creation of an asymptotic classification of solutions of singularly perturbed equations using a well-known approach to solving the boundary value problem. In this case, the singular problem is understood as the problem of constructing the asymptotics of the solution of the Cauchy problem for a system of ordinary differential equations with a small parameter with a large derivative. The asymptotics of the solution in all cases is based on the last time interval or the construction of a boundary value problem for a system with a weak clot in an asymptotically large time interval. Purpose - to construct and substantiate the asymptotics of solving a singular initial problem for a system of two nonlinear ordinary differential equations with a small parameter; To date, a number of methods have been developed for constructing asymptotic expansions of solutions to various problems. This is the method of boundary functions developed in the works of A.B. Vasilyeva, M.I. Vishik, L.A. Lusternik, V.F. Butuzov; the regularization method of S. A. Lomov, methods of averaging, VKB, splicing of asymptotic decompositions of A.M. Ilyin and others. All the above methods allow us to obtain asymptotic expansions of solutions for wide classes of equations. At the same time, such singularly perturbed problems often arise, to which ready-made methods are not applicable or do not allow to obtain an effective result. Therefore, the development of methods for solving equations remains a very urgent problem. As a result of the study, an algorithm for constructing an asymptotic classification of the initial solution of the problem with a singular perturbation is given, and approaches to estimating the residual term are also shown.

The article is devoted to the development of a technology for obtaining organic fertilizers from poultry waste based on biocatalytic processes. Currently, many poultry farms have become sources of environmental pollution, thereby causing serious environmental problems and economic and social damage. The problem of reliable protection of the natural environment from pollution by bird droppings is currently relevant. In the area of operation of large poultry farms, air pollution by microorganisms, dust, foul-smelling organic compounds, which are decomposition products of organic waste, as well as nitrogen, sulfur, and carbon oxides, is possible. Bird droppings contain acids, nitrogen, phosphorus and potassium, heavy metals. The content of nitrogen, phosphorus and potassium changes dramatically depending on the quantity and quality of the feed. Humic substances isolated from brown coal have a sufficiently high sorption activity and are used as cheap sorbents for solving a number of environmental problems in industry. These studies are aimed at minimizing the main disadvantage of the anaerobic digestion process, the low reaction rate, which leads to the need to create large-volume bioreactors. On the basis of the research carried out, a technology has been developed for obtaining organic fertilizers from poultry waste by the method of anaerobic fermentation of chicken manure with humidity at a temperature of 27 °C - 50 °C with the addition of sodium humate. The resulting fertilizer is intended for use in agricultural production, horticulture, floriculture, forestry, municipalities, in household plots in order to increase the yield and quality of crop production. For the developed technology, an application has been submitted for obtaining a Patent for the invention of the Republic of Kazakhstan «Method for producing organic fertilizers» (priority No. 2021-22818, dated July 13, 2021). The invention allows to significantly reduce the time of fermentation, to enrich the product with organic and mineral products contained in sodium humate, to convert the salts of heavy metals into an insoluble state, to improve the environmental friendliness of the method.

Main problem: The article analyzes water quality assurance as the main goal of preserving human health. The study of chemical and microbiological parameters of wastewater and drinking water was carried out using generally accepted standards. The number of deaths associated with the use of contaminated drinking water, according to WHO, tripled in 2021 and reached almost 19 thousand against 6 thousand in 2020. In addition, the number of neoplasms, diseases of the genitourinary system, digestive organs and skin increased by 2 %, to 1.486 million. The reasons for the increase in the level of harmful chemicals and microbiological pollutants in the water are outdated sewage treatment plants, old pipes and disinfection with chlorine. Purpose: Study of the quality of wastewater and drinking water in Pavlodar, study of the quality of wastewater and drinking water in Pavlodar. Methods: Sampling of wastewater, chemical and bacteriological analysis of wastewater and drinking water, statistical method, correlation analysis of experimentally obtained results and calculated characteristics, etc. Results and their significance: In the field of public health risk, pollution of reservoirs that are sources of household drinking water supply and recreational water use, the continuing necessary high deterioration of water supply networks, their accident rate, as a result of low level of operation, failures in the operation of treatment facilities. Hygienic assessment of reservoirs according to complex indicators indicates the continuing high degree of water pollution in places of water use. The water quality indicators of the surface reservoirs of the region remain low in terms of sanitary and chemical (primarily organoleptic and general sanitary), as well as microbiological indicators. According to toxicological indicators, the level of water pollution in places of water use is estimated as moderate. The main pollutants of the Irtysh River in Pavlodar are industrial enterprises and housing and communal facilities that discharge untreated or insufficiently treated wastewater into reservoirs. A complex of causes of drinking water pollution has been identified: high deterioration of water supply networks, their accident rate, because of a low level of operation, failures in the operation of treatment facilities, unfair treatment of industrial wastewater by industrial enterprises of Pavlodar, etc. Priority preventive directions for improving the quality of water as a source of life are the implementation of long-term targeted planning of measures for the modernization of water supply and sewerage networks and facilities in Pavlodar. The state of water supply necessary and measures to improve it should be constantly monitored and considered at meetings of sanitary and anti-epidemic commissions.

Combustion engines operate over a wide range of power and speed. To the greatest extent, this applies to automotive and tractor engines and diesel engines operating at fractional and idle loads for a significant part of the operating time. When designing engines, the choice of their main design and layout parameters is carried out in a comprehensive manner, taking into account the provision of the required power and efficiency in the modes of maximum torque and rated power. However, ensuring the economical operation of modern highly accelerated diesel engines at low loads and idling causes a whole range of problems related mainly to the organization of effective mixture formation and fuel burnout, as well as to ensuring stable fuel supply. Thus, the cycle dose of injected fuel in idle mode is 8–12 times less than the cycle dose in nominal mode, which determines increased requirements for fuel equipment and difficulties in ensuring high-quality mixture formation. At the same time, diesel engines operate in idle mode up to 50 % of the total operating time, consuming up to 15–20% of the fuel. For truck engines, the relative idle time is approximately 20–25 %. Thus, the development of measures to improve the efficiency of diesel engines at idle is relevant. The purpose is to perform a numerical analysis of the effect of switching off cycles in diesel engines for autotractor and diesel locomotive purposes on the working processes in the cylinder and the indicator parameters of the cycle in idle modes. When writing the article, traditional methods (comparison, description, and measurement), generallogical methods and research techniques (analysis, generalization, etc.) were used. A numerical analysis of the operating cycle of a diesel engine equipped with a cycle shutdown system was performed. The relationship between changes in fuel injection characteristics when cycles are turned off with indicator indicators of the engine operating cycle in idle load modes is disclosed. It has been established that the expediency of switching off cycles in a specific engine operation mode is determined primarily by the features of the injection, carburetion and fuel burnout processes.

An analysis of the mechanical, chemical and pyrogenic impact of the Baikonur Cosmodrome on the environment showed the presence of man-made impacts of the first stages (FS) used on the ecosystems of the impact zones (IZ). This article presents the concept of a controlled landing of spent launch vehicles with liquid rocket engines (LRE) in the expected zones of damage to the ecosystems of the area while maintaining the energy-optimal launch scenario of the launch vehicle. Purpose of the article - development of effective technologies for reducing the anthropogenic impact during launches of promising rockets from the Baikonur Cosmodrome based on theoretical and experimental studies of innovative technologies: reducing the area of impact of parts from launch vehicles; fire and explosion safety, no danger of rocket launchers; controlled descent of used first stages; To solve the problem, it is proposed to create an additional IASM, which will be included in the environmental management system of the Baikonur Cosmodrome. Possible design solutions are proposed based on the evaporation of untreated liquid waste from the tanks of separated parts, their fire and explosion safety, and the use of the obtained vapor-gas mixtures for controlled unloading of separated parts while moving along the landing trajectory to the optimal area. The authors of the article have developed evaluation criteria that characterize the main environmental indicators of the studied areas: fire hazard, soil cover and impact on vegetation are studied for inclusion in the IASM. There are objective requirements and basic rules for the creation of HIASM, which is an integral part of the environmental management system of the cosmodrome.

Main problem: The use of waste heat is most often solved by installing heat exchangers, but this is not effective when the temperature of this heat does not exceed 10-15 0 C, in which case this heat can be used using a heat pump. Where can I get this heat? Almost any enterprise needs cooling of any equipment elements or substances – working fluids; the heat received from them can be sent to a heat pump and used here at the enterprise. Purpose: Consideration of the possibility of using the heat of cooling water from the pump CNS 60-165 and the proposal of a new scheme with the installation of a heat pump that uses this heat. Methods: This is achieved due to the fact that it is proposed not to discard the heat, but after its use in the heat pump evaporator, transfer it to the heated medium - water, which is then sent to the shower cabins of the enterprise. Since the showers are located in the same room, the cost of transporting heat and losses will be minimal. Methods: In the course of the research, the possibility of using the waste heat of an industrial enterprise for using it here at the enterprise for the purposes of hot water supply was considered. For these purposes, it is proposed to install a heat pump, thanks to which the thermal potential increases, which makes it possible to fully use the received heat. Results and their significance: As the experience of foreign countries has shown, heat pumps can be widely used in many industrial enterprises, and in conditions of increased competitiveness, in order to reduce energy costs and the cost of manufactured products, install heat pumps to utilize excess heat, for example, process water, which is available in many production allows you to have a significant economic effect.

Main problem: Bird droppings and animal manure contain acids, nitrogen, phosphorus and potassium, heavy metals. The content of nitrogen, phosphorus and potassium changes dramatically depending on the quantity and quality of the feed. Purpose: To study the effectiveness of the use of organomineral fertilizer from poultry waste, obtained using biocatalytic processes on the growth and development of plants. Methods: An application for a Patent for the invention of the Republic of Kazakhstan "Method of obtaining organic fertilizer" has been submitted for the developed technology for obtaining organic-mineral fertilizer. In the soil intended for growing seedlings of tomatoes of the “Pepper-shaped Orange” variety and peppers of the “Bogatyr” variety, the resulting fertilizer was applied in the amount of 1 kg per 1 m2 of soil, which was dug to a depth of 8-10 cm and used to grow seedlings in closed ground and subsequent for planting it in open ground. Soil without fertilization was used as a control. The process of soil preparation for open ground, intended for planting seedlings, was carried out for the experimental field with the introduction and control without fertilization. Experimental and control studies were carried out under equivalent climatic conditions, the scheme and technology of watering plants. In total, 100 bushes of each plant species were used in the experiment. Results and their significance: The use of the obtained organomineral fertilizer allows to increase the yield of vegetable crops (tomatoes, peppers) by 20-25% compared to the control. In addition, in the experimental samples, an increase in the number of fruits on a bush was noted with an increase in their size, a decrease in the growing season and the number of damaged fruits.

Main problem: recently, much attention has been paid to energy saving in production, especially when it comes to industrial units that burn fuel. There are several ways to maximize the use of the heat released during the combustion process, for example, to reduce the temperature of the flue gases at the outlet of the unit, by maximizing its use, both in the technological process itself and by installing additional heat-receiving units, for example, air heaters or other heaters. Another way to save money is to reduce heat losses through the lining of these high-temperature units. Metallurgical units that consume a large amount of energy and fuel require an analysis of their consumption, and ways to save their consumption based on the results of the analysis. Purpose: this article considers the possibility of replacing the existing inner insulation layer of the second and third sections of a high-temperature unit - a metallurgical furnace, with a new one with better technical and economic indicators. Methods: the possibility of replacing the existing inner insulation layer of the second and third sections of the high-temperature unit with a new one, with the best technical and economic indicators, was considered. The calculation of heat losses by thermal conductivity through the side surfaces and the roof with new insulation was performed, and the economic efficiency of the proposed solution was proved. Results and their significance: replacing the existing inner layer of insulation - refractory concrete PHLOCAST M30 (thermal conductivity coefficient from 1,4 to 1,45) with the proposed CERALIT GUN HK 70070 (thermal conductivity coefficient from 1,03 to 1,12) will reduce heat loss to the environment, and thus to reduce fuel consumption for the furnace.

In Kazakhstan, within the framework of the Program «Development of domestic value and export-oriented industries», new modern dairy enterprises are being actively modernized and new modern dairy enterprises are being created, where membrane processes are being introduced to concentrate the components of milk. This is necessary for the rational and integrated use of raw materials, including through the processing of secondary resources, the main of which is whey. Improving the production processes of traditional food products and developing innovative ones is possible only with the use of the latest technologies and technological equipment. Membrane processes are widely used for the use of fractionation and concentration of liquid dairy products, which allows for a new solution to the processing of raw materials and opens up opportunities in the development of new types of food products. The article is devoted to the issue of production and processing of whey in Kazakhstan. The main types of membrane technologies and the advantages of their use in the dairy industry in the Republic of Kazakhstan are considered. The role of membrane technologies in the processing of whey is substantiated, various methods of introducing membrane processing methods to ensure the demineralization of whey, obtaining products with high biological value and consumer properties, reducing the cost of energy carriers, reducing the volume of raw materials in order to save transport costs, non-waste processing of milk solids, recycling water are described. This article analyzes the problems of using resource-saving membrane technologies in the production of dairy products in the Republic of Kazakhstan, ways to solve existing problems associated with increasing the economic efficiency of enterprises. The favorable impact of the use of membrane technologies on the social and environmental aspects of whey processing in the country is substantiated.

On the territory of the Northern industrial zone of Pavlodar in the area of the industrial wastewater reservoir «Bylkyldak» in some areas of the earth there is soil contamination with mercury, exceeding the MPC for mercury (2.1 mg/kg) by 500 times. The total mass of mercury dispersed in the surface layer of soils is 2.8 tons. The mass of contaminated soil is approximately 208,000 tons. Pollution of the territory is historical. The purpose of the article is to determine the efficiency of chemical binding (immobilization) of mercury in the soil with the Japanese drug Denite® in real field conditions of the territory of mercury contamination in the Northern industrial zone of Pavlodar using an experimental study; to determine the stability of insoluble mercury compounds formed by the preparation at extreme winter and summer temperatures and seasonal fluctuations in open ground. Soil samples were taken for the study at 11 points in the centers of mercury pollution. Laboratory studies were carried out in an accredited analytical laboratory of the Testing Center of JSC Caustic. Soil samples were treated with Denite®, the preparations obtained were stabilized, and water extracts were prepared. The content of mercury in soils, extracts from them, and plants was determined by the atomic absorption method on a RA-915+ spectrometer equipped with RP-91 and RP-91S attachments. As a result of research, the effectiveness of Denite® in the chemical binding of mercury in the soil has been proven and its optimal dosages have been determined. As a result of the positive tests of the technology of chemical immobilization of mercury, the prospect of a practical solution to the issue of demercurization of mercury-contaminated soil on the territory of the Northern industrial zone appeared.

The relevance of this article is that the impact of human economic activity on the natural environment is becoming comparable in scale to geological factors. In this regard, the importance of protecting the biosphere has increased immeasurably. The earth is the only common home of all earthlings. Society, including us, cannot help but worry that the planet has approached a critical ecological threshold. The main goal of the research that we set for ourselves in this article is to create a predictive model for overcoming the environmental crisis in the following areas: environmental education, greening technologies, administrative and legal direction, international cooperation. To achieve the result, we tried to process as much information as possible, analyze the situation, draw appropriate conclusions and propose our own model for overcoming the environmental crisis. The hypothesis is that environmental pollution, improper disposal of household and industrial waste, and poor environmental culture have a detrimental effect on the ecology of the city, poisoning the environment and public health. The main research methods used were methods of empirical knowledge - these are observations, survey methods, questionnaires, as well as theoretical methods. The results of these studies can be used to inform the population about the impact of waste on human health, as well as the importance of storing, recycling and obtaining secondary raw materials, in order to reduce the amount of garbage on city streets. And also about the existence of unauthorized waste collection sites and administrative responsibility for the creation of such landfills in the city and in the surrounding area, this is an educational activity in all areas of education, starting from preschool institutions, the media, advertising agencies, NGOs, environmental authorities and also, using international experience, in the construction of a solid waste processing plant in his hometown.