The article is devoted to the issues of residential buildings`s reliability and durability. The paper deals with the challenges in the estimation of a technical condition of frame filling bearing walls, presents the comprehensive survey methodology for buildings. The article announces the questions on physical and moral wear of frame filling bearing walls.

The main purpose of the new test materials: tests, test items is an objective assessment of the level of mastery of knowledge , skills and abilities , relevant state general education standards in mathematics and the ability to apply them in real life ( in extracurricular life situations ). The article deals with technology making control gauges in mathematics at the secondary school, is an example of the development of such a meter

The implementation of international educational standards as the main goal of Nazarbayev university and the perspectives to incubate reforms in post soviet times are concidered in this article.

The article is devoted to existing issues in the field of taxation, which contribute to the trends of social exclusion in the society. The indicators that characterize social inclusion have been summarized. It is proved that using a particular tax policy social and economic processes can be adjusted, such as production level, employment, investment, science and technology, structural changes, prices, foreign economic relations, social standard of living, the level of certain products consumption. Under the conditions of various forms of ownership establishment in the formation of human capital, an important role is played by employers that provide aspects of social inclusion or prevent social exclusion.

In this article it is considered different definitions to “maternity” concept as well as moral and psychological aspects of students training for maternity which mean human perception of the whole set of requirements, duties, social standards of behavior. This training is oriented to increasing of responsibility of students before family life, social prestige of maternity, psychological readiness of students for maternity, obtaining succinct knowledge. The level of psychological readiness for maternity is determined by the combined effect of positive and negative factors influence by the moment when a woman becomes a mother.

The article describes multilinguistic education issues in the framework of global experience. It reveals what is meant by multilinguism in European countries as well as measures taken for multilinguism to become standard. The article also presents a possible approach to carry out a monitoring research on multilinguistic education efficiency estimation in the Republic of Kazakhstan.

This article discusses the theoretical aspects of management foundations of marketing system of industrial enterprises of the Republic of Kazakhstan. As marketing planning is very important for industrial companies. Industrial and consumer market generally, supply exceeds demand, and therefore there is a struggle for every specific customer. With the growth in sales volumes, number of customers and markets from sellers there is a need to study their customers - who they are, their needs, buying behavior, motivation. Each seller tries by examining the consumer, to create a standard model (the rules of conduct of the seller), contributing to the sales.

This article describes the radical changes that occur in the training of educators and future path of modernization in accordance with the prospects of development of the entire education system of Kazakhstan for the long term.

In this article the process of socialization of the young generation is examined in the new system of market relations, taking into account his adaptation in a sociocultural environment. Development of social motivation based on the increasing of pursuance of receiving higher education taking into account new market tendencies in social and educational sphere has special relevance. Increasing of interest in the problems of students leads to accumulation of empiric and theoretical material about learning activity motivation, motivational preferences and system of values of the students, social status of the students of higher educational institutions, about attitude to higher education system and quality of teaching in higher educational institutions.

New approaches in the system of monitoring of educational achievement standardized assessment results are needed. To organise educational process effectively, to plan work of ensuring high quality educational services and inform public about the state of educational system. The article books into the system of assessment at the modern stage of higher education, new approaches in the system of monitoring of educational achievements, peculiarities of test technologies. The article also compares the current system of assessment and the assessment system within renovation in educational system, pays attention to the monitoring system of students’ achievement.

The article is devoted to the quality of the educational process, when medical colleges get more additional responsibility for the results of their educational activities, the attention of preparing nurses is able to increase the efficiency of the health system in the Republic of Kazakhstan. These are nurses of new pharmacy in accordance with the contemporary challenges of society and the international standards. This area is considered as part of the educational program of applied bachelor degree nursing in Pavlodar medical college.

Education is one of the priority directions in the development of our state. It is impossible to talk about modernization of education without monitoring its quality. The article considers a differentiated approach to learning, the conditions under which this approach can be applied. Two main criteria of the differentiated approach are singled out: level of training and learning ability. The article gives recommendations on the phased implementation of differentiation. Positive and negative parties of different types of control of education quality are also presented. Most objective is the differentiated test control. The article reveals its characteristics, the possibilities of using it in lessons in primary school.

In this article, quality of life as priority and one of directions of social-and-economic development of the state are considered. The quality of life of rural population and his social security, state of economy of agroindustrial complex and development of rural territories are distinguished in article. The issues of rural territories are considered, as exemplified by rural district. In the Republic of Kazakhstan there are all terms that is needed for development of agriculture. For the height of quality of life of rural population are needed substantial adjustments of public agrarian policy and also increase of social responsibility of the state and business.

The article presents new tools for managing labour safety to conduct behavioral safety audits, transforming meetings and labor protection councils into cascade committees, to implement technical and safety standards, and to use new assessment and motivation system and methods of internal incidents investigation.

The main provisions of the road quality management concept are outlined, as well as the tasks are defined that need to be solved in order to ensure the management of the system at three levels: strategic, tactical and operational.

The article is devoted to the current problem of quality control and safety of dairy products. The article provides a generalized description of the system models, discusses the main problems and advantages in implementing the quality control system in small and medium-sized dairy enterprises.

The study of the structure of matter is one of the main tasks of chemistry. The problem can be solved with the help of graph theory, which allowed us to find an unexpected way to solve our logical problem. Thus, the aim of our article was to master the theory of graphs for constructing the structural formulas of organic compounds. Prediction of chemical reactions, the possibility of systematization and study of the essence of basic chemical concepts, such as structure, configuration of atoms and molecules, confirmation, isomerism, and, undoubtedly, the quantum-mechanical basis of the interaction of molecules, all this is possible using chemical graphs. Graph theory allows a non-standard way to approach the problem of constructing the structural formulas of molecules of organic compounds.

Non-governmental organizations cover a large part of the educational services market. Great demand for the educational services improvement and meeting the target groups’ special needs is calling for the regulating documents for NGOs to be developed. Regulating documents are to serve for the establishment of the consistent approach to the papers content and design, and to manage the independent education services quality evaluation routine.

Currently, the system of secondary education is moving to the updated content of education, accompanied by a change of the state educational standards, standard curricula, educational and methodical complex. The article notes the special importance of the course of Informatics in the system of secondary education in modern conditions, an attempt is made to analyze the developed electronic applications in Informatics for students of 3, 6, 8 classes

The article discusses the mechanisms of state regulation of the development of the private segment of the market for preschool educational services and their content. The analysis of development trends and instruments of state regulation of the sphere of preschool services, the main problems of the development of the private segment of the market of preschool educational services and ways to solve them are carried out.

The article describes the results of a study of the effectiveness of the standards being implemented in railway transport. A general view of efficiency and standardization was analyzed. It was studied which document regulates the application of standardization in the Republic of Kazakhstan. Further, the international railway standard IRIS «International Railway Industry Standard» was taken as a basis, which, in turn, is based on the international standard ISO 9001. A study of the methods and types of effectiveness of standards was carried out, as well as an analysis of the applied international standard in the field of railway transport IRIS. The purpose of this standard is to create a business management system that allows for continual improvement, with an emphasis on preventing and reducing delivery defects. It is important to note that the effectiveness of standardization is evidenced by examples showing that ignoring standards turns out to be huge losses for a company for a number of reasons, for example, because its products have not been certified for compliance with a specific standard; due to the additional costs of the company for reworking products that are not manufactured in accordance with the requirements of the standards in the country of export. An analysis of the effectiveness of standardization work in the railway industry can be expressed in relative terms of the effects obtained as a result of the application of the standard: for example, in an increase in the level of safety or in economic growth. The basis for determining the actual effect is the actual level of production that existed at the given enterprise before the introduction of the standard. The measures that can be applied in order to increase the efficiency of solving the problems of developing standardization in the field of railway transport have been studied. Such standardization as one of the elements of technical regulation can provide a contribution to economic growth in excess of the corresponding indicators from the introduction of patents and licenses.

Main problem: The article examines the issues concerning teaching reading skills to the middle school students according to the updated program. Purpose: The article analyses the course book “Excel” for 7 th grade students on teaching reading skills. Methods: The criteria of analyzing the course book contain the forms of text presentation, types and situations modeled by the text, compliance with the level of English proficiency, age of students, information content, and accessibility. It also includes assessment ofcourse book texts for the development of reading for general understanding of information (skimming), for identifying details (scanning) and reading with full comprehension, as well as for the different types of tasks for reading. Results and their significance: The texts in the course book correspond to the age characteristics of adolescents, the level of English language proficiency (A2) and are developed according to the standard curriculum.The most popular forms of text presentation are popular science texts and information about public events. The situations in the texts are dominated by educational, most of all the mixed type of text prevailed. There is a balance for the types of tasks developing reading for general understanding and reading for identifying details which leads to the development of functional reading literacy. The types of reading tasks used are quite diverse and contribute the development of communicative skills (pair work, group work, etc.). The misbalance of tasks on developing low order and high order thinking skills can be solved through adding some tasks developing HOTS.

The article describes modern pedagogical technologies of teaching a foreign language in primary school and examines their impact on the development of various competencies of primary school students. The authors emphasize that information and communication pedagogical technologies help to implement a student-centered approach to learning, provide individualization and differentiation of learning, taking into account the abilities of younger students, their level of education. And also modern pedagogical technologies as a systemic holistic means of restructuring activities make it possible to improve the quality of the educational process, to solve the problems of personality development. Purpose – analysis of modern educational technologies used in English lessons. The current system of training primary school teachers requires a revision of its structure, organization, relationship with school practice and innovative processes in the education system. Therefore, the article proves that an important part of the educational process should be the use of new pedagogical technologies in improving the quality of training of specialists at the university, providing the possibility of self-development of the teacher's personality, increasing his creative abilities and improving the educational process. The study used a descriptive method, analysis and synthesis methods. The authors of the article call the development of the student's personality (moral and cognitive) and the complex of abilities for successful interaction with the polycultural and multilingual world around him as the goal of foreign language education in primary grades. Therefore, it is important that the future primary school teacher, in accordance with the requirements of the state educational standard, has formed the knowledge, skills and abilities necessary for the application of modern pedagogical technologies. At the present time, when a new education system was created, focused on the world educational space, changes in the educational process changed the paradigm of education, updated the content of education, formed a new approach, new relationships. Keywords: technologies, competencies, multicultural, multilingual, English, modern education.

The data of calculating the actual cost of production are widely used in production management at industrial enterprises, to monitor compliance with the standard cost of production adopted by the enterprise, to identify ways to optimize labor costs and material resources. The level of cost depends on the activity of an industrial enterprise in a market economy: the amount of profitability, the economic efficiency of its activities. The choice of the method of cost accounting and calculating the cost of production depends on the specifics of the technology and organization of production, as well as the requirements of the efficiency of enterprise management. Studying the formation of accounting information when calculating the cost of production by type of product, comparing the level of costs with the revenue received makes it possible to determine the economic efficiency of production. The purpose of this study is to identify the problems of forming accounting information when calculating the cost of production for making decisions to reduce costs. The implementation of the research goal is facilitated by the use of methods of comparative analysis, synthesis, and graphical method for visualizing the results obtained. When considering the cost calculation, attention is paid to the fact that in market conditions there is a need for detailed cost accounting and calculation of the cost of production. If we take into account that in market conditions, prices for products are formed as demand increases, and demand is influenced by external factors, then we can only influence the costs based on the cost calculation. The basis for making effective management decisions will depend on how reliable and to what extent the accounting information is formed. Costs are the main constraint on the profit of industrial enterprises, since the main strategic goal of any enterprise is the mechanism for increasing profits. The ability to achieve this goal is limited by the following internal factors: the complexity of the cost grouping, technological processes, and the impact on product quality. It is necessary to improve the information system, which is based on the data of primary documents, document flow and the order of cost grouping. The proposed measures will contribute to strengthening the control function of the management and, as a result, effective cost management.

The article presents the results of implementing a quality management system at the enterprise. The study and analysis of the international standard ISO 9001:2015, as well as sanitary and epidemiological requirements for production control were carried out. The main requirements and rules for the implementation of input, operational and output control of products at enterprises at all stages of the product life cycle were identified and presented. In addition, it was determined what requirements must be met by enterprises to implement a quality management system. It is important to note that this work is necessary at the enterprise, as it has the following advantages: by improving product quality, product sales increase, the level of management of the enterprise and personnel increases, and cost savings are realized at the stages of development, production and operation. It follows that to implement a quality management system, it is necessary to set the following tasks: describe the company's processes, develop performance criteria and evaluate processes, develop the necessary documented information, implement documentation in all departments, familiarize them with the quality policy and goals, conduct timely internal audits for further SWOT analysis, and conduct an assessment by an external auditor in order to obtain a certificate of compliance. An important step in quality management is that the organization should not eliminate nonconforming results of processes, but should identify potential nonconformities, assess the risk with the preparation of a Protocol, plan and implement actions to reduce risks. Difficulties may arise: lack of understanding by the staff of the need to implement a quality management system, lack of a clear vision, mission, lack of complete information on processes, lack of quantitative and qualitative evaluation criteria, quality is defined as the quality of products, not as the quality of processes, resources, lack of monitoring of customer satisfaction. It is possible to overcome these difficulties only with the implementation of the quality management system according to ISO 9001, since the requirements prescribed in the international standard are a real tool for improving the efficiency of the enterprise, which will help bring the organization to a higher level of development.

The Kazakhstani manufacturer has repeatedly faced situations when pseudo-enterprises, disguising themselves as domestic producers of goods, works and services, received preferences and used government support measures, won government and other purchases, while not having enough equipment for production. The article is devoted to current problems and prospects for the application of the Industrial Certificate in the Republic of Kazakhstan. The dynamics of the development of the sphere of public procurement of the Republic of Kazakhstan is considered, depending on the specific requirements for certain areas of production of goods, works and services. The material in this article is important from the point of view of ensuring fair competition between competing enterprises in the same industry. The complex of transformations in the system of standardization, certification and quality management has been carried out since the first years of independence of the Republic of Kazakhstan. These transformations have been observed over the years, vivid examples of which are: the application of the European model of technical regulation to the modern realities of the economic situation in the Republic of Kazakhstan, accession to the Customs Union, the adoption of unified technical regulations of the Customs Union, the introduction of new regulations and legal acts defining the share of local content in products and services, as well as the potential of domestic industries. The results of these transformations have proved that the system of technical regulation of the Republic of Kazakhstan is an effective tool for the development of the economy. The development of new Kazakhstani normative legal acts and normative documents introduced to support the domestic producer of goods and services will contribute to the transformation of the old system and the creation of a new one that is fundamentally different from the previous one. The article discusses problematic issues in the field of industrial certification, namely: a lack of qualified personnel; unregulated pricing system for work carried out in this area; the complexity of the industrial certification procedure; a lack of automation of processes of the industrial certification mechanism. Analyzing the practice of industrial certification, this article offers recommendations for solving the above problematic issues. New edition of amendments and additions to the «Rules for the formation and maintenance of the register of domestic manufacturers of goods, works and services, as well as the issuance of an Industrial certificate» approved by the decision of the Presidium of the National Chamber of Entrepreneurs of the Republic of Kazakhstan «Atameken» dated 28.12.2018. No. 28 is designed to reconstruct the process of obtaining the Industrial Certificate. The process should become more transparent, understandable and highly efficient. Also, with the introduction of changes, the problems that hindered the receipt of the Industrial certificate by individual enterprises should be resolved.

Currently, close attention is paid to industrial safety at hazardous production facilities. Compliance with industrial safety requirements is directly related to the risks of accidents that can lead to man-made disasters, negatively affect the health and life of the population. As in any other industry, there are problems in ensuring industrial safety. There are several reasons for this: the backlog of standards from scientific and technological progress, the exclusive competence of state authorized bodies, and the lack of a risk-based approach. After the collapse of the USSR, the requirements of industrial safety in the Republic of Kazakhstan have practically not changed: laws and statutory instruments (hereinafter-the LSI) are approved and put into effect, after which they are constantly changed and supplemented; the presence of national and international standards, which, in fact, are revised on the basis of the USSR standards, taking into account the influence of the realities of the time. It can be concluded that the current standards are not focused on the future, scientific and technological progress, innovation, so they are constantly undergoing changes, thereby adapting to the necessary requirements that dictate modernity. State regulation does not contribute to the effective development of industrial safety. This is due to the fact that the state performs exclusively supervisory functions (thus it is exclusively educational in nature), and there is no dialogue between authorized state bodies, expert organizations, scientific organizations, and testing laboratories. If we consider the experience of the Russian Federation in the field of industrial safety, then it makes no sense to accept even some experience, since: similar to the Kazakhstan’ LSI and regulatory and technical documentation (and their constant dynamics), the development of cooperation with the Russian Federation within the framework of the Eurasian Economic Union. Accordingly, it is advisable to consider the experience in the field of industrial safety in Europe and the United States of America because of the effectiveness of regulation and supervision than in the Republic of Kazakhstan and the Russian Federation. This article provides information about international experience in the field of industrial safety in the United States and the European Union. The tasks of state regulation in the field of industrial safety in the Republic of Kazakhstan, the Russian Federation, the United States, and the European Union are described in detail. The analysis of normative-legal acts and normative-technical documentation is carried out. Based on the analysis of international experience, solutions to problems in the field of industrial safety for the Republic of Kazakhstan are essentially presented. The purpose of this article is to reveal the problem in the field of industrial safety in the Republic of Kazakhstan and international experience that the Republic of Kazakhstan can borrow in order to effectively ensure industrial safety. Study of international experience (USA, EU countries, Russia) in the field of industrial safety in terms of: analysis of standards; regulation (control and supervisory functions) to ensure safety. The results of this article will reflect the problems that hinder the effective provision of industrial safety in the Republic of Kazakhstan and essentially suggest ways to solve them.

In the conditions of market uncertainty, the coronavirus pandemic, the absence of an officially articulated national idea, national interests and ideology in Kazakhstan, the problem of the lack of logically justified and coordinated coordinates of systemic thinking, an unambiguous paradigm of humanitarian thinking (analytical, pedagogical, managerial, economic, etc.) is becoming more and more clearly realized as the most important conditions for personal, civil and professional self-determination. The purpose is to substantiate the general logical coordinates and methods of reformatting the ambiguous humanitarian paradigm used in the activity. The study used various methods: the ontological principle of genetically meaningful logic, the method of transformation of concrete images of objects based on their abstract essence, the method of ascent from the abstract to the concrete, the speculative language of schematic images of thought and the language of methodological theory of activity. Logically justified universal abstract-concrete coordinates of universal motion are given. In relation to life and the world of activity, they can be concretized by coordinates: "standard of living – efficiency of activity", or "efficiency of activity – time", or "results – costs", or "quality – quantity", etc. The use of motion vectors in the logic of descent from the concrete to the abstract (NCA), ascent from the abstract to the concrete (AAC), as well as in their combination – logic CAC gives certainty to thinking. As an example, the scheme of the qualitative difference between educational (pre-professional) activities from professional ones using these methods and paired dialectical categories is given. The scheme and description of the functional model of the system object, considered as a rubicon of the transformation of educational activity into professional activity, are given. To reformat the indefinite, ambiguous paradigms of the humanities used in the activity into functional-logical, visible, constructive and unambiguous, it is recommended to use abstract-concrete coordinates, the methods given, the language of schematic images and the paradigm of the methodological theory of activity. As an example, the concept of a typical unit of activity development is given. A visible unambiguous paradigm is a necessary, but not sufficient prerequisite for adequate personal, civil and professional self-determination of a person in situations of high uncertainty. A sufficient prerequisite is the acquisition by subjects of appropriate reflexive-thinking abilities for self-determination, self-organization, self-regulation, etc.

Main problem: The article analyzes water quality assurance as the main goal of preserving human health. The study of chemical and microbiological parameters of wastewater and drinking water was carried out using generally accepted standards. The number of deaths associated with the use of contaminated drinking water, according to WHO, tripled in 2021 and reached almost 19 thousand against 6 thousand in 2020. In addition, the number of neoplasms, diseases of the genitourinary system, digestive organs and skin increased by 2 %, to 1.486 million. The reasons for the increase in the level of harmful chemicals and microbiological pollutants in the water are outdated sewage treatment plants, old pipes and disinfection with chlorine. Purpose: Study of the quality of wastewater and drinking water in Pavlodar, study of the quality of wastewater and drinking water in Pavlodar. Methods: Sampling of wastewater, chemical and bacteriological analysis of wastewater and drinking water, statistical method, correlation analysis of experimentally obtained results and calculated characteristics, etc. Results and their significance: In the field of public health risk, pollution of reservoirs that are sources of household drinking water supply and recreational water use, the continuing necessary high deterioration of water supply networks, their accident rate, as a result of low level of operation, failures in the operation of treatment facilities. Hygienic assessment of reservoirs according to complex indicators indicates the continuing high degree of water pollution in places of water use. The water quality indicators of the surface reservoirs of the region remain low in terms of sanitary and chemical (primarily organoleptic and general sanitary), as well as microbiological indicators. According to toxicological indicators, the level of water pollution in places of water use is estimated as moderate. The main pollutants of the Irtysh River in Pavlodar are industrial enterprises and housing and communal facilities that discharge untreated or insufficiently treated wastewater into reservoirs. A complex of causes of drinking water pollution has been identified: high deterioration of water supply networks, their accident rate, because of a low level of operation, failures in the operation of treatment facilities, unfair treatment of industrial wastewater by industrial enterprises of Pavlodar, etc. Priority preventive directions for improving the quality of water as a source of life are the implementation of long-term targeted planning of measures for the modernization of water supply and sewerage networks and facilities in Pavlodar. The state of water supply necessary and measures to improve it should be constantly monitored and considered at meetings of sanitary and anti-epidemic commissions.

The article presents a method of teaching object-oriented programming to students of the educational program «Computer Engineering and software» using the project method. The problem of the insufficient level of organization of the educational process in colleges, aimed at studying any kind of object programming, is investigated. In this regard, the important aspects that must be taken into account when constructing a methodology for teaching object-oriented programming, aimed at enhancing the cognitive independence of students, are described in detail. It is shown that the solution to this problem largely depends on the degree of achievement of the learning goals of students specified in GOSTiPO, as well as on the methodological guide to object-oriented programming, developed in accordance with the requirements of modern education. An analysis was made of the State Compulsory Standard for Technical and Vocational Education of the Republic of Kazakhstan, the Model Curriculum and the Working Curriculum in the discipline "Fundamentals of Object-Oriented Programming" for students of the educational program "Computer Engineering and Software" and the teaching methodology developed on their basis. The purpose is to substantiate the methodology for teaching students object-oriented programming, which activates cognitive activity through the use of the project method and its practical application in the educational process. Methods: The methods of analysis, synthesis and deduction were used in the article. Results and their significance: The practical result of the analysis was the method of teaching college students object-oriented programming, using the project method, which is necessary for a more intensive development of cognitive independence. The practical significance of the results is to increase the efficiency of studying the discipline by taking into account the individual characteristics of students.

The banking system is one of the most important components of the economy of any state, ensuring the functioning of the economy. The researchers study the functioning of individual banks and the banking system as a whole, because it is the banking system being an intermediary in the market system of relationships that allows financing of all spheres and branches of the national economy and the organization of their interaction. In modern conditions of aggravation of the economic crisis, pandemic, the role and importance of second-tier banks is changing. Banks, being one of the most dynamic and «flexible» spheres of economic activity, not only organize the functioning of economic entities, but also face a number of «newly created» problems that were not discussed until recently: cybercrime, data leakage, various modified fraudulent schemes and much more. An important distinguishing feature of the banking system is its dynamism, the ability to quickly respond to changes in the economy, the challenges of globalization. The domestic banking system copes quite well with the challenges of globalization, which is highlighted in this study. The purpose of the article is to consider the changes taking place in the banking system of Kazakhstan in modern conditions. When writing the article, methods of comparison, analysis, synthesis, aggregation, etc. were used. The result is the identification of the main problems related to the current state of the banking system, as well as their impact on the future configuration, improvement of the banking system, can be useful to bank employees dealing with the management of the banking system.

The production of vaccine preparations before release requires standardization of their immunobiological parameters, especially safety and immunogenic efficacy. An indicator of the immunogenic effectiveness of the lumpy skin disease vaccine is the resistance of vaccinated cattle against the virulent virus. However, according to preliminary studies, the virulent control virus did not always cause clinical disease with characteristic symptoms when infected subcutaneously. The purpose is to develop a biological model in the form of a complex consisting of a pathogenic virus, a method of infection and a susceptible animal to assess the immunogenicity of a lumpy skin disease vaccine. Local cattle, intact from lumpy dermatitis, were used to reproduce lumpy dermatitis and develop the causative agent of the disease. As the initial infectious virus, we used a 20 % tissue suspension of nodules (skin nodules) obtained from cattle that fell ill with lumpy dermatitis in the field in the Atyrau region in 2016. As a viral mass to control immunogenicity, a 20 % suspension of skin nodules and edematous skin tissue at the site of the pathogen injection, obtained after the “refreshment” of the virus in animals, were used. The disease was reproduced by infection with the test suspension of the virus intradermally, subcutaneously, intravenously at a dose of 0.5 cm3 and titration on the skin of the animal. The effectiveness of the biological model was assessed by morbidity, severity of the course and severity of the manifestation of the disease. During primary intradermal infection with a field isolate of the virus, the disease manifested itself in one of three animals in the form of hyperthermia, depression, lacrimation, and the appearance of several nodular nodules in the skin of animals. The refreshed tissue virus caused clinical disease both in subcutaneous, intradermal and intravenous infection. But the clinical signs of the disease were more pronounced with intradermal inoculation of the virus, and with intravenous inoculation, it manifested itself in a more severe form with a fatal outcome. Inoculation of the virus intradermally into different areas of the skin led to the development of an independent skin lesion in each infected point in the form of painful edema, followed by necrosis, the size and intensity of which depended on the dose of the injected virus. This development of skin pathology made it possible to work out a method for determining the virus titer in vivo. The tissue virus obtained from the edematous tissue at the site of the pathogen injection was guaranteed to cause clinical disease in cattle during intradermal inoculation and made it possible to evaluate the immunogenic efficacy of the produced batches of vaccine against lumpy dermatitis.

Main problem: in Kazakhstan, it is urgent to develop measures aimed at introduction and promotion of Corporate Social Responsibility (CSR) at all levels of Kazakh society, in order to strengthen sustainability of socio-economic development, active participation of business in social modernization and human capital development. In this regard, there is problem of forming effective mechanism of social responsibility, as well as the implementation of principles of corporate social responsibility in management practice of domestic companies. Purpose: this study aims to determine the main stages of the development of CSR in business in Kazakhstan in the specific context the domestic business sector. Methods: methods of systematic, comparative and statistical analysis and of expert assessments were used. Expert survey, document analysis, secondary analysis of sociological research, case study method were used as empirical research methods. The analysis of documents was performed to study the legislative and regulatory frameworks that determine practices of implementing interaction between business and government in modern states. To identify and characterize models of CSR implementation, method of secondary data from a number of foreign comparative studies was applied. Case study method allowed identifying empirical cases of effective implementation of mechanisms of social public-private partnership in field of social investments by domestic business structures. Results and their significance: in the article, based on study of domestic and foreign experience, mechanism of interaction between business and government in solving problems of regional economic systems was considered. Main stages of evolution of CSR practices in Kazakhstan were identified and characterized, structural (subjects, institutions) and regulatory (legislation, strategies, programs, standards) components of interaction between business and government in solving problems of region in modern conditions are established. In addition, main differences between domestic CSR system and European model are considered, general characteristics of which are given in article.

Main problem: processes of economic modernization in practical solution should reveal common understanding between institutional, legislative and industrial relations, essence of organizational transformations, formulation of basic provisions for instrumental support of independent transition of technological processes to new round of socio‑economic relations. Processes should be based on new characteristics of standardization, methodology of system functioning, technical conditions, norms, rules, instructions and regulations, which provides for institutional changes. Purpose: to explore new trends in digital transformation of the world economy, as well as to show that tasks and settings of vector of technological processes of digital economy go far beyond known principles of economic development, joining the mainstream of global trends. Methods: theoretical and methodological basis was concepts, hypotheses and theories presented in works of domestic and foreign researchers. The methodology is based on systematic approach, in which methods of comparative, factorial, subject-object, structural-functional, statistical, correlation analysis and extrapolation were applied. Results and their significance: analytical review of theoretical approaches of foreign economists on this problem was carried out, which allowed author to identify theoretical, methodological and applied foundations for determining directions within framework of state strategy for planning socio-economic development. Scientific discussion on conditions for changing model of economic development, modernization of economy with transition to first and second generation platforms, hereinafter referred to as ecosystems, is evaluated. The fundamental differences between theoretical argumentation of proponents of promoted digital technologies and their opponents are determined. Positions of argumentation of impact on change of driving factors are analyzed in order to adjust methods of state policy and choice of vector of technological processes. The question of correlation of macroeconomic theory in evolutionary sense, which goes beyond known principles of economic thought of digital transformation, is considered.

Main problem: achievement of socio-economic sustainability in each locality depends on coordinated actions of executive and representative authorities, which should be focused on creating appropriate conditions for ensuring social standards and improving quality of life of rural population, as well as the development of main economic basis – agricultural production. In this context, in today’s reality, the urgent problem of sustainable development of rural settlements is provision of appropriate industrial and social infrastructure, because systemic development of rural regions depends on this rural infrastructure, which acts as an element of territorial socio-economic subsystem. Purpose: identification and studying of key factors that determines and contributes to balanced development of industrial and social infrastructure of rural regions of country in context of sustainable development goals and objectives. According to the results of the study, the main distinctive features of sustainable development of rural areas are determined due to the provision of industrial and social infrastructure of rural regions, which has a correlation with the level and quality of life of the rural population, as well as the final results of agricultural production. Methods: general methodological principles, systematic approach and empirical methods of economic cognition act as methodological basis for implementation of this study: economic and statistical models, forecasting and modeling, methods of induction and deduction, synthesis, and also logical methods. Results and their significance: results of research can be used as a practical basis in activity of local executive bodies and local self-government bodies. Their use is possible for scientific substantiation of development and implementation of comprehensive plans for development of industrial and social infrastructure of rural areas of region within framework of Regional Development Plan, focused on qualitative improvement of economic basis of villages and the well-being of all segments of rural population.

The sphere of taxation, ensuring the implementation by the state of the first stage of public financial activity is the mobilization of public funds, is the subject of close attention of scientists and increased public interest. The processes of tax reform taking place in the Republic of Kazakhstan show the dynamics of tax and legal regulation, implement a number of international standards in the field of tax relations, which cause an urgent need for theoretical understanding and thorough generalization, analysis and evaluation of new or significantly changed institutions of tax law. Tax administration has a procedural nature, which reflects the dynamics and statics of tax legal relations. From the standpoint of statics, tax administration is a set of all tax procedures provided for by tax legislation aimed at ensuring the receipt of tax payments to the relevant budgets. The purpose of the study is to determine the legal regulation of the procedures for fulfilling the obligation to pay taxes and fees by individuals and legal entities in the Republic of Kazakhstan by clarifying their legal nature, and bringing to administrative responsibility for non-fulfillment of this obligation. The methodological basis of the research is based on modern methods of cognition: dialectical, formal-logical, historical, comparative-legal, analytical-synthetic, system-structural, logical-legal. The article describes the legal regulation of the fulfillment of the obligation to pay taxes and fees in the Republic of Kazakhstan from the standpoint of statics (as a set of all tax procedures provided for by tax legislation, aimed at ensuring the receipt of tax payments to the relevant budgets) and dynamics (as the activities of relevant entities for the implementation of tax procedures). A distinction has been made between tax administration in a broad and narrow sense as: tax administration, which includes the whole set of procedures, including bringing to administrative responsibility for non–payment of taxes, as well as procedures for resolving tax conflicts in the mode of administrative coordination and in court; administration of tax payment - procedures for the payment of taxes and fees, the result of the implementation of which is aimed at all tax activities of the state, which ensures the actual receipt of funds to the budgets. The article also discusses a number of features of bringing legal entities to administrative responsibility for non-payment of taxes, within the framework of administrative proceedings.

Main problem: the article substantiates the relevance of the development and production of specialized food products for athletes and the population involved in sports, fitness as part of a healthy lifestyle. Purpose: development of specialized food products with a general health-improving character, intended for the population involved in sports, fitness and experiencing increased physical exertion. Methods: the obtained results were statistically processed using the methods of correlation and regression analysis and standard software packages "Statistica 6.0". Measurements of chemical, microbiological, organoleptic parameters were carried out using standard methods and modern instruments: an analyzer, an analytical analyzer electrophoresis cell, a high-performance liquid chromatograph, and others. Results and their significance: a scientific concept for the creation of fermented specialized milk-based food products for sports nutrition was formulated; biotechnologies for specialized food products for athletes were developed. For the practical implementation of the results of analytical and experimental studies, packages of regulatory and technical documentation for the production of new products have been developed, which have been tested in the production conditions of existing enterprises in the dairy industry.

The article contains the results of a research work devoted to an important problem - the development, production and delivery to the consumer of fermented dairy products of a healthy diet fortified (enriched) with milk protein, a vitamin-mineral complex, and probiotics and prebiotics. Purpose is based on mathematical modeling of experimental data, to determine an effective fermented food system for use as the basis of a fortified (enriched) curd product for a healthy specialized diet; to develop a recipe and technology for its production; to study the nutritional, biological and energy value of a new product. Modern technologies and equipment were used in experimental studies: ultrafiltration, fortification, etc. The studies were carried out by standard physicochemical, microbiological methods in three to five repetitions. Mathematical and statistical processing of experimental data was carried out using the program "Statistica-6.0". A recipe and technology for the production of a curd product for a healthy specialized diet has been developed. Its nutritional, biological and energy value has been studied. The developed recipe and biotechnological parameters for the production of the curd product were tested in the industrial conditions of the leading enterprise JSC "Lyubinskiy MKK". The quality and safety of the curd product was studied in the laboratory of techno-chemical control of FGANU "VNIMI" (Moscow).

The main problem: In the conditions of market uncertainty, the coronavirus pandemic, the absence of an officially articulated national idea, national interests and ideology in Kazakhstan, the problem of the lack of logically justified and coordinated coordinates of systemic thinking, an unambiguous paradigm of humanitarian thinking (analytical, pedagogical, managerial, economic, etc.) is becoming more and more clearly realized. as the most important conditions for personal, civil and professional self-determination. Purpose: to substantiate the general logical coordinates and methods of reformatting the ambiguous humanitarian paradigm used in the activity. Methods: the ontological principle of genetically meaningful logic, the method of transformation of concrete images of objects based on their abstract essence, the method of ascent from the abstract to the concrete, the speculative language of schematic images of thought and the language of methodological theory of activity. The results and their significance: logically justified universal abstract-concrete coordinates of universal motion are given. In relation to life and the world of activity, they can be concretized by coordinates: "standard of living – efficiency of activity", or "efficiency of activity – time", or "results – costs", or "quality – quantity", etc. The use of motion vectors in the logic of descent from the concrete to the abstract (NCA), ascent from the abstract to the concrete (AAC), as well as in their combination – logic CAC gives certainty to thinking. As an example, the scheme of the qualitative difference between educational (pre-professional) activities from professional ones using these methods and paired dialectical categories is given. The scheme and description of the functional model of the system object, considered as a rubicon of the transformation of educational activity into professional activity, are given. To reformat the indefinite, ambiguous paradigms of the humanities used in the activity into functional-logical, visible, constructive and unambiguous, it is recommended to use abstract-concrete coordinates, the methods given, the language of schematic images and the paradigm of the methodological theory of activity. As an example, the concept of a typical unit of activity development is given. A visible unambiguous paradigm is a necessary, but not sufficient prerequisite for adequate personal, civil and professional self-determination of a person in situations of high uncertainty. A sufficient prerequisite is the acquisition by subjects of appropriate reflexive-thinking abilities for self-determination, self-organization, self-regulation, etc.

Main problem: The article highlights the problem of tests as methods of psychology, the influence of validity and reliability on the results of psychological research. Purpose: Uncovering the significance of validity and reliability on psychological research results. Results and their significance: Testing is an important method in psychology, allowing measuring various aspects of the psyche and behavior of a person. The history of the development of tests in psychology goes back more than a century and began with the work of Francis Galton and Alfred Binet. Over time, the tests have become widely used in various fields such as education, personnel selection, clinical diagnosis and research. Basic requirements for tests include reliability (repeatability of results), validity (measurement accuracy), standardization (same test conditions) and objectivity (lack of subjectivity in assessment). Tests must be designed using psychometric principles to ensure accuracy and validity of results. Modern tests include a variety of measurement techniques, such as tests of personality, intelligence, aptitude, and professional skills. The use of tests in psychology requires professional training to correctly interpret the results and make valid conclusions. Testing as a method of psychology continues to evolve, and its role remains key in the study of the human psyche and behavior. Testing in psychology has a wide range of applications, including assessing personality traits, identifying psychological disorders, and predicting behavior and success in various areas of life. The development of computer-based tests and online platforms makes testing more efficient and convenient for researchers and participants. Modern tests increasingly take into account cultural differences and the diversity of individual characteristics, which contributes to more accurate and tailored assessments. It is important to remember that the use of tests requires ethics, confidentiality and compliance to ensure the reliability and validity of the data obtained.

The main problem: the article examines the development of cognitive abilities of high school students by conducting a theoretical analysis of philosophical, pedagogical, psychological, scientific and methodological works and current directions of its development. Improving the educational process in secondary educational institutions and developing the cognitive abilities of high school students is an urgent problem. Therefore, the task arises of developing the thinking and activity of high school students while studying in secondary educational institutions, teaching them to use their knowledge and skills in new life situations. The implementation of these tasks makes it urgent to search for ways and forms of organizing the educational process, which will contribute to the formation of the skills to plan and organize the cognitive activity of high school students. Purpose: to substantiate the general logical coordinates and methods of reformatting various humanitarian paradigms used in action. Methods: ontological principle of logic with genetic content, method of transforming specific images of objects based on their abstract meaning, method of transition from abstract to concrete language, language of thinking of schematic images of thought and language of methodological theory. activities. Currently, such an update represents a transition to the methods and tools of active learning technology as a means of continuous development of science and school practice, the use of which in most cases helps to increase the interest and activity of adolescents. The results and their significance: logically substantiated universal abstract-concrete coordinates of the universal movement are presented. In relation to life and the world of activity, they can be defined by the coordinates: “standard of living - activity efficiency”, or “action efficiency - time”, or “result - costs”, or “quality - quantity” etc. Clarity of thinking is ensured by the logic of movement vectors descending from the real to the abstract, ascending from the abstract to the real, as well as their combination. The constant need for cognitive activity creates in students a feeling of cognitive satisfaction, seeing the result of curiosity, its planning and organization. This result teaches the teenager to actively seek new cognitive activities and gain experience in mastering the subject.

The main problem: In modern conditions, the healthcare system of Kazakhstan is going through changes aimed at providing a high level of medical care and maintaining the health of the population. In the face of modern challenges such as technological innovations, demographic changes and global pandemics, it becomes critically important to analyze and adapt to new requirements. Understanding and adapting to these trends are critical steps for the successful development of the healthcare system in the future. This article examines the main trends in the development of the healthcare system in Kazakhstan and their impact on the provision of medical services and the level of public health. The article focuses on the essence of the main problem facing the healthcare system of the Republic of Kazakhstan at the present time. The relevance of the topic is manifested in the context of a dynamically changing socio-economic environment, which puts pressure on the existing health care system. Demographic changes, the growth of chronic diseases and the need to introduce modern technologies create challenges that require a comprehensive analysis and effective strategies for the development of the system. Purpose of the article: The purpose of the article is to analyze and systematize the main trends in the development of the healthcare system in Kazakhstan, taking into account current challenges and changes in the global healthcare paradigm. The authors seek to identify key areas of development, as well as provide practical recommendations for improving the system. Methods: The study is based on a comprehensive methodological approach, including analysis of health statistics, economic analysis of expenditures and financing, as well as a review of modern scientific publications. Additionally, methods of comparative analysis with international health standards are used. Results and their significance: The article identifies not only the main problems in the healthcare system of Kazakhstan, but also provides analytical results expressed in the form of identified development trends. The work is important for developing strategies to improve the quality and accessibility of medical services in the country. The recommendations proposed by the authors can serve as a basis for making effective decisions in the field of healthcare in modern conditions.