The article deals with the participation of the public sector of the economy of Kazakhstan in the formation of income and expenditure of households. The authors use the methodology of national accounts - 93 and its use to assess the dynamics and structure of the revenue figures of the households.

On the territory of the State Reserve Zagatala marked about 900 species of plants. These plants are distributed according to a vertical zonation. Of the 11 species of plants (1.2%) of the algae, 45 species (5.0%) - mushrooms, 58 species (6.4%) - lichens, 49 species (5.4%) - mosses, 23 species (2.5%) - the highest spore, 5 species (0.5%) - gymnosperms, 130 species (14%) - monocots, 677 species (65.0%) - dicotyledons.

In this article the population growth analysis of Pavlodar region between 2004-2013 is presented. Studying the demography development trend in the country the author tried to determine changes in the natural population movement. Statistical analysis of population is relevant in the field of social and political programs development in the country. A dynamic population growth rate of Pavlodar region and its trend model are presented in the article

In this article issues of efficient use of ferroalloys production waste to save costs are considered; energy efficiency of agglomerate production is calculated; sintering heat balance data are presented by a case study of Aksu Ferrolloy Plant. According to the annual economic benefits calculation the folowing results are obtained: due to аglogases recirculation, fuel saving is 1334.5 t.o.e.; due to reheating it is 1491 t.o.e.; due to installation of thyristor converters to the unit the annual energy saving is 1714000 kWh. Thus, it is identified that besides energy-efficiency measures during recycling of solid and gaseous wastes, the use of agglomerate increases IPF electric furnaces performance as well, decreases specific energy and reducing agent consumption which means the prime cost of finished products will be reduced.

In this paper the correlation and regression factor analysis of population growth of Pavlodar region between 2009-2013years. In this article the correlation and regression analysis of fertility by region of Pavlodar region in the period 2009-2013. This analysis relevant in determining the level natural movement of the population according to social factors. In the form factor variable data used general divorce rate in the region and the average housing supply, sq. m. of total area 1 person. According to the results identified a close relationship between the factor and effective sign.

This article describes the theoretical and practical aspects of peculiarities of development of creative abilities of pupils in primary and secondary schools of the state institution "School-Lyceum №8 for talented children" of Pavlodar". The article proves the need and possibility of use in extracurricular activities of the course "Art therapy" to enhance the level of development of creative abilities of pupils. During the experiment it was proved that not only creative abilities, but emotsionalno-volitional sphere develops in the process of studying the material in this course. The findings suggest that creative abilities of pupils of elementary and secondary fcoli develop in activities.

This article views the research methods allowing by the organoleptic and physical and chemical indicators to estimate the honey naturality and approximately determine its origin due to the results of the analyses. The factors influencing the quality of the produced honey have been considered and the chemical Вестник Инновационного Евразийского университета. 2015. №3 ISSN 1729-536X 167 composition of the useful components of honey has been studied. It is shown that Kazakhstani honey can be rather competitive at the world market and the main task is the increase the honey production without changing its quality.

The paper presents the thermal design of the building heating system of a four educational building № 1 Eurasian innovative university.Data are presented for the period from 1 December to 28 February for three seasons: 2013–2014, 2014–2015, 2015–2016 years. On the basis of the actual thermal design graphics and design of heat were built in the period from 1.12. at 28.02 for three seasons (2013-2014,2014-2015, 2015-2016 years). In these graphs clearly visible difference between the two values. According to calculation, the average difference was 13.02 % of the actual heat consumption.

The article presents a study of the effect of a resistor in a network neutral point from 6 to 35 kV on the conductive electromagnetic interference with the ground-fault current. A mathematical model is proposed.

The article considers various methods of suppressing electromagnetic disturbances encountered in the electric power system. Detailed descriptions of methods of suppression, as well as classification of electromagnetic interference on the basis of the source of their occurrence are given. Illustrative diagrams of the 106 Вестник Инновационного Евразийского университета. 2017. № 1 ISSN 1729-536X three methods are shown. Based on the analysis, recommendations were made on improving the noise-proof feature of power equipment.

The article considers methods and techniques of speech development in preschool children by means of fiction.

This article contains material about the features of working with pre-school children with attention deficit and hyperactivity disorder. Psycho-corrective effects will be effective if the psychologist cooperates closely with parents and teachers. The choice of methods for correcting ADHD should be individual in nature, taking into account the degree of manifestation of the main manifestations of the syndrome and the presence of concomitant violations. ADHD correction is possible with a variety of therapies, such as art therapy, neuropsychology, game therapy, music therapy, bibliotherapy, sand therapy. The syndrome of hyperactivity influences, first of all, on the development of the emotional sphere of the child of preschool age, which is expressed in an increased sense of anxiety, the occurrence of a large number of fears and other types of emotional disorders.

The article presents the results of the analysis of situational, personal, competitive anxiety and characterological features of 4 gymnasts of the main and 6 girls of the Pavlodar youth team in rhythmic gymnastics.

The article deals with the problems of the formation and development of a multilingual education, the mechanism for the training of multilingual specialists in the educational system of Kazakhstan. The multilingual education as an effective tool for training the younger generation for life in an interconnected and interdependent world is considered.

The article presents the results of researching a problem of the organisation in educational institution of the complex socially-psychological family help. On the basis of the analysis of the empirical data the attempt to reveal mechanisms of development of family ability to normal functioning is undertaken, the article defines the maintenance and an activity orientation of school socially-psychological service of psychological support and a psychological family support service of each schoolboy.

Changes in the education system have influenced the content of education in primary school. Working with younger students requires teachers to use modern methods. Determining the leading principles of teaching, the priority strategies of learning and the organization of an English lesson is what contributes to the 36 Вестник Инновационного Евразийского университета. 2018. № 1 ISSN 1729-536X effectiveness of teaching. The article is devoted to the analysis of the characteristics of teaching English in elementary school in the context of updated educational content. The authors reviewed the elements of the lesson, methods and techniques of organizing the educational process in primary school, described the factors affecting the effectiveness of training. The authors also tried to uncover a number of problems and give recommendations that arise in connection with the tendency to learn English in primary school.

The article presents the results of studies conducted at the veterinary clinic «Jean» in the city of Pavlodar. It is noted, that for the period 2013-2017. 348 cases of disease in dogs were registered by pyroplasmosis – a protozoal disease caused by parasitic organs of the genus Piroplasma. The authors described the clinical symptoms of disease in animals, as well as the nature of the flow of infectious diseases.

At present, the role of trade organizers in the conditions of a rapidly changing economic situation, global financial crises, and the rapid development of market relations is very important and significant. First of all, in the support of entrepreneurship, the development of trade relations, the promotion of local goods inside the country and abroad, the creation of conditions for the organization and development of trade in general. In this publication, the author analyzes the trade turnover of the Soviet and current periods, as a result of which the 30 Вестник Инновационного Евразийского университета. 2018. № 2 ISSN 1729-536X conclusion follows that, in addition to the state, other subjects of commodity circulation are also needed to create conditions for the development of trade. They were the organizers of trade. However, in the publication a significant place is given to the legal personality of special subjects of trade, the characteristics of the main types and functions of each of them, tasks and goals, as well as the problems of organizers of trade.

This article deals with the problems of organizing psychological and pedagogical support of children with disabilities in a rehabilitation center. Currently, an extensive system of institutions of the Ministry of Вестник Инновационного Евразийского университета. 2018. № 2 ISSN 1729-536X 91 Education, Health, Labor and Social Protection has been established in our country, in which medical, social, psychological and pedagogical support is provided for the development of children with disorders of the musculoskeletal system. The main task of maintenance is the creation of psychological and pedagogical conditions for the full development and development of a socially successful person, the protection of the rights of the child to receive education and development in accordance with their potential in the real conditions of their existence. The leading principles of support for the development of the child in an educational institution are: the advisory nature of the accompaniment; priority of the interests of the child; an individual approach accompanied by the development of the child; maintenance continuity; integrated (multidisciplinary) approach, accompanied by development.

This article discusses the evaluation of the effectiveness of disinfectants «Dezosteril» and its derivatives and analogues in the fight against tuberculosis. The emergence of tuberculosis and its pathogens. Namely, «to Dezosteril» and its derivatives produced on the territory of «BO-NA» of Pavlodar city. The main attention is paid to the types and methods of disinfection. Resistance of microorganisms to chemical disinfectants based on peracetic acid (NUK) and hydrogen peroxide.

Currently, the system of secondary education is moving to the updated content of education, accompanied by a change of the state educational standards, standard curricula, educational and methodical complex. The article notes the special importance of the course of Informatics in the system of secondary education in modern conditions, an attempt is made to analyze the developed electronic applications in Informatics for students of 3, 6, 8 classes

The present article analyzes the problematic issues of digitalization of the automotive industry, motor transport and logistics in the Republic of Kazakh stan. The main emphasis is made on the consideration of positive results for the economy and society, which is the digitalization of the automotive industry, transport and logistics, the analysis of the tasks and content of digitalization in these sectors, the analytical study of the prospects of legal regulation of the automotive industry, motor transport and road logistics in the form of domestic legislative and international legal means to improve digitalization in these areas. The names and substantiation of 7 draft laws of Kazakhstan, which could be adopted in the near future by the Kazakh legislator, Вестник Инновационного Евразийского университета. 2019. № 2 ISSN 1729-536X 35 are proposed. The most important and priority bills include: «On state management of digital (creative) economy», «On the development of intelligent transport system in production and operation», «On the introduction of digitalization in the activities of companies, enterprises and institutions », «On the improvement of logistics based on digital technology along all the Kazakhstan roads».

On the basis of research on bacteriological indicators of the water supply system in the Ekibastuz region for the period 2016-2018 the 310 cases of detection of pathogenic microflora were identified. The chemical indicators are given the results of research to determine the content of toxic elements and heavy metals in the source and purified water, as well as in the distribution network of Ekibastuz. The largest number of pathogenic microflora cases and a high concentration of chemical elements are noted during the flood season. Sporadic pathogenic microflora and chemical elements are also recorded in the winter and summer periods.

The research explores the scientific approach to the concept and essence of the forensic characteristics of crimes, the concept’s formation history, and also draws attention to the role and place of this scientific category in the theory of modern forensic science. The article emphasizes that the forensic characteristic, which is an independent element of a private forensic methodology for investigating crimes, is one of the basic concepts of forensic theory and practice. The author notes that the phrase “forensic characteristics of crimes” should be understood as an ordinary data system on the elements of certain types of crimes and their mechanisms. Concerning specific crimes, it is necessary to consider the issue of the forensic information system for a specific offence, which is reduced to the subject of the investigation. The article emphasizes the importance of the category of “forensic characteristics of a crime” for countering novel criminal offences, among which the author highlights cybercrime. There is no doubt that this concept of the forensic characteristics of crimes is capable of investigating the main practical goals, including new elements of criminal offences, along with the solution of scientific tasks for the disclosure, investigation and prevention of crimes. As a result, the author concludes that it is precisely the concept of the forensic characteristics of crimes formulated in the article that, along with the solution of scientific tasks for the disclosure, investigation and prevention of crimes, is capable of Вестник Инновационного Евразийского университета. 2020. № 2 ISSN 1729-536X 67 implementing tasks related to the main practical goals of the investigation, including new elements of criminal offences.

Rapidly changing trends in development of the countries’ economies require rational approach to regulation of innovative activity and investments directed to organization of real economy sector. At the same time, for analysis of current state policy in innovative development system fully it takes to assess effectiveness of regulation innovative activity mechanisms in the economy of Kazakhstan. In this article an assessment of mechanisms of innovative activity regulation in Kazakhstan in global system of competitiveness is carried out. For this purpose, an expert assessment system is used, which is realized as method of Global Competitiveness Index of World Economic Forum (WEF). The authors investigate ranking of WEF in Kazakhstan economy, in particular, assessment of carrying out of country’s innovative activity. Thus, purpose of research is to assess mechanisms of innovative activity regulation in Kazakhstan in a global system of competitiveness. Methodology – synthesis, content-analyze, accommodation, monographic method, factor analysis, economic-statistical research method. Carried out assessment of mechanisms of innovative activity regulation in Kazakhstan in global system of competitiveness allowed fully assess effectiveness of regulation innovative activity mechanisms in economy. Researching subindices of International rating of World Economic Forum for 2017-2018 in relation to 2013-2014 authors noted that in Kazakhstan today there is decrease in all subindices of rating and factors (“Basic requirements”, “Business sophistication”), except for “Innovation” subindex. This subindex was significantly decreased due to sharp deterioration in macroeconomic environment, which is directly related, in opinion of authors, to significant losses in revenues from oil export. This in turn affected deterioration of budget’s indicators. There is special attention to place and role of innovative activity regulation in country’s socio-economic policy. Organizational-methodological problems during realization of innovative policy in Kazakhstan are also in details investigated, which makes it necessary to solve them in order to achieve innovative policy’s efficiency at regional and national levels.

In the article presents the results of studies on the effect of temperature and pressure on the chloride sublimation of zinc and lead from converter dusts of steel production. Currently, an objective necessity is the development of dust utilization technologies for converter steel production, with its further use in production and production of by-products. The use of dust allows not only to save natural raw materials, but also increases production efficiency and improves the environmental situation. The content of non-ferrous metals in dusts makes it difficult to process and use them in agglomeration or in blast furnace production, while the iron content in converter dusts (sludges) makes it possible to use them as promising metallurgical raw materials. Therefore, for a more complete processing of dusts, extraction of non-ferrous metals from them is proposed. The purpose of this work was to determine the possibility of extracting zinc and lead from sludges of the converter production by the method of chloride sublimation. We used dust containing: 86,3 % Fe2O3, 3,5 % FeO, 0,9 % Al2O3, 1,6 % CaO, 0,9 % MgO, 1,1 % MnO, 0,8 % SiO2, 4,4 % ZnO, 0,5 % PbO. The study was conducted in the temperature range 200-1600 degrees C and pressures of 0,01; 0,1 and 1 bar based on a complete thermodynamic analysis using the HSC – 5.1 software package. Finnish metallurgical company Outokumpu, based on the principle of minimum Gibbs energy. According to the results of the studies, it was found that, at normal pressure, lead chloride sublimationbegins at a temperature of 600 degrees С, and zinc - at 900 degrees С: a decrease in pressure to 0,01 bar reduces the temperature to 500 degrees С and 700 degrees С, respectively; lead chloride sublimation under equal conditions is more complete than zinc; To achieve zinc chloride distillation at the level of 90-96 %, the process must be carried out at 1145-1200 degrees С and pressure from logP = -2 to 1,2 bar, while the degree of lead chloride distillation is 99,8-100 %.

This paper presents the results of the influence of ultrasonic treatment in the cofermentation of the cattle manure mixture (cattle) with the leaven from the rumen of ruminants on the process of biogas production. Anaerobic digestion was carried out in matinence periodic operation at the mesophilic temperature of 38 C ̊. As a substrate, a mixture with a content of 70 % cattle manure and 10 % leaven from rumen of ruminants was used. Treatment with ultrasound of the mixture was carried out at an intensity of 10 W/cm2 and an amount of input energy of 9350 kJ/kg of dry matter (DM), which completely eliminated the processes of stratification and sedimentation. Decomposition of organic matter (OM) in the periodic regime with the enzyme and ultrasound treatment occurred within 8 days, the usual substrate during this time OM decomposed 3.0 times less (only 14 %). The process of fermentation of methane in continuous and periodic modes treated with ultrasound, as at other temperatures, was stable, as can be judged by the values of volatile fatty acids (VFA) Volatile fatty acids (VFAs), alkalinity, pH, and biogas. The energetical efficiency of methane fermentation is estimated by comparing the volume of fuel (biogas) and heat consumption for technological needs. As shown by the comparison of efficiency of different regime, the largest amount of commercial energy in the form of biogas was obtained in the mode of joint fermentation of a mixture of cattle manure (cattle) with a ferment from the rumen of ruminants treated with ultrasound – 3 times more than without treatment (space).

The article presents studies on the morphological picture of the blood of fish in a comparative aspect, depending on age and species. In recent years, the influence of anthropogenic factors on the ecosystem of water bodies has intensified. In this regard, the main direction of solving the problems of ichthy -epizootological situations is new areas in veterinary medicine, in particular, hematological recognition of shaped elements in the blood of fish. To identify and understand the state of the fish organism, which they reflect, the researcher must first of all correctly determine these forms of cells in the blood, especially this applies to white blood cells. Our review is brief and does not pretend to be completely complete literature data on this issue. All this together gives a complex morphological picture of the blood of fish, which is difficult to typify. Unlike higher vertebrates, fish lack bone marrow and lymph nodes, hematopoiesis occurs both in organs, which include reticular syncytium (gill apparatus, kidneys, lymphoid organ), and vascular endothelium of the gill apparatus and heart and spleen and, in some cases, intestinal mucosa. In bone fish, the anterior part of the kidneys is the main organ of hematopoiesis; hematopoiesis also occurs in the lymphoid organs and in the spleen. The purpose of this research is to study the morphological picture of the blood of fish in a comparative aspect, depending on age and species. 3-7 animals from each age group of fish were examined on average. To study the morphological composition of blood from fish, blood was taken from gill vessels and from the heart cavity. In the process of research, it was found that the peculiarity of fish is the presence in the blood of both mature and young red blood cells, red blood cells have nuclei. Bony fish have four types of myeloid cells at all stages of development, known in the hematology of higher vertebrates and humans. A distinctive feature of fish granulocytes is the ability to observe leukocytes in all successive stages of filling the cytoplasm with granules, and the nucleus of th ese cells is very rarely lobed. Unlike fish, in mammals it is very difficult to distinguish between the stages of development of basophils and eosinophils (myelocytes, juvenile, stab and segmented), since the segmentation of the nucleus is weakly expressed , and the number of granules does not increase as the cells mature. It can be noted that the studies initiated can contribute to determining the choice of hematological studies. Given the above factors, a detailed epidemiological classification of hematolo gical studies will be obtained. The research results make certain additions to the procedures of veterinary-hematological studies in the field of ichthyopathology. In the future, research will continue in the direction of hematological diagnosis of fish di seases and prerequisites will be created for a detailed epidemiological classification of hematological studies.

The article is devoted to the current problem of differential diagnosis of diseases of viral etiology in farm animals. Viral diseases are currently widespread, occupy a leading role in the infectious pathology of farm animals, causing enormous economic damage. Given the magnitude of animal vaccine prophylaxis, in order to increase the effectiveness of antiepizootic measures, the urgent issue i s the development of methods for the rapid and effective detection and differentiation of field and vaccine strains of the infectious rhinotracheitis virus in cattle. The possibility of using a polymerase chain reaction to identify and differentiate a vacc ine strain from epizootic strains and isolators of the cattle infectious rhinotracheitis virus is considered. In the process of research, a PCR-RFLP analysis method was developed to detect the IRT virus in the test material. The PCRRFLP analysis method was used to identify and differentiate the vaccine strain TK-A form epizootic strains and isolators of the cattle IRT virus. The principle of PCR, based on repeated repetition of DNA cycles, annealing and synthesis, which leads to an increase in the number of specific DNA fragments of the pathogen, allows you to take into account the results of PCR in an agarose gel. Analysis time is about 30 hours. The sensitivity of detecting viral DNA is 1-10 picograms (102 TCD). Due to characteristics such as relative simplicity and reaction rate, high sensitivity, specificity and reproducibility, PCR has recently become widespread in basic and applied research in various fields of biological science, including veterinary virology. The results obtained during the studies show that the use of PCR-RFLP allows to differentiate field and vaccine strains and isolates of the IRT virus with a high degree of reliability. The use of PCR -RFLP analysis increases the efficiency and informativeness of studies in the molecular epizootol ogy of cattle RTI, as it allows not only to identify the DNA of different virus strains regardless of their nature, but also to differentiate between them, including differentiating the strain TK-A used for the production of attenuated vaccines against epizootic strains and isolates of the virus.

Gennady Beshkarevis a poet, novelist, publicist, memoirist who lived in Pavlodar for some time in the 30s of the last century. Among other things, in his creative heritage there are memoirs of artistic and historical interest "Pavlodarskiyebyli". In this work, in an artistic and journalistic form, social and everyday pictures are vividly conveyed, which significantly enrich our knowledge about pre-war Pavlodar. "Pavlodarskiyebyli" is especially valuable because earlier the 30s of the 20th century were considered as a kind of "white spot" in the Russian literature of the region. On charges of anti-Soviet activities, G. A. Beshkarev was sentenced to serve a five-year term in Siberian camps, and his work, which remained unpublished for a long time, only finds its readers in our time. The works of G.A. Beshkarev are included in the "Pavlodar literary"anthology on the study of Russian writers in Kazakhstan. In this regard, it is important to restore the portrait of the author's personality, and today the memories of his contemporaries, their written and oral evidencecan only help. This article is an attempt to systematize and analyze the data obtained as a result of the interview and can serve as a material for creating a biography of the writer. Conversations with the author's relatives, conducted in the fall of 2017 in Almaty by the author of the article, reveal the writer's personality traits, his attitude to various aspects of life: to the era, people, and creativity. In the memoirs of family members, Beshkarev appears as a person of rare directness and steadfastness, irreconcilable with the injustices of his time, as a person physically resistant, endowed with endurance. In the memory of friends, he is captured as a talented speaker, sometimes angry with the language, as clockwork, indefatigable, deeply artistic person of rare charm, who was able to impress colleagues, women, and students, as well as a teacher who is ready to selflessly and enthusiastically help students overcome difficulties.

The article is devoted to the mathematical modulation of a complex of experimental data obtained in the process of experimental studies of processed cheese products, processed by mathematical methods. The purpose of this study is to establish the type and amount of the melting salt that promotes the formation of the plastic structure of the processed cheese product. The analysis of scientific research in the field of food technologies showed that mathematical modeling is used in the following areas: clarification of the modes of technological processes, design of recipes and assessment of the quality of finished products, as well as forecasting the shelf life of new products when they are put into production. The most relevant in describing the processes of food production are models of multivariate variance-regression analysis using methods of mathematical planning of the experiment. The authors carried out mathematical modeling and established graphical dependencies characterizing the degree of influence of the regulated factors X1 and X2 on the controlled ones that determine the quality and safety of processed cheese products. It is important that the mathematical analysis of the graphical dependences of the rheological parameters on the adjustable factors indicates the reliability of the data obtained. It is concluded that an increase in the melting salt dose leads to an increase in the – limit shear stress, which reflects the nature and state of the consistency of the processed cheese product. The process of normalization of the controlled factors by the maximum value was carried out. Graphical dependencies were built and regression analysis was performed, the results of which allow an objective assessment of the degree of influence of the type and dose of the melting salt on the chemical and organoleptic characteristics of the test products. The authors have proven that the optimal efficiency of transforming the structure of the constituent components of the recipe into a plastic structure of a processed cheese product that is stable during storage is provided by a combination of adjustable factors X1 (Solva 85) and X2 (Solva 120) taken in a ratio of 1: 1, with a total amount of 1,2 mas.%. At the same time, the quality indicators of the experimental products are characterized by the following values of the controlled factors: У1 – 1280 Pa; У2 – 9 points, У3 – 9,301 (2,0-2,2109 colony forming units /g).

The work is intended to determine the etiopathogenetic principles of animal prevention in gynecological pathology and issue a theoretical justification. At the same time, improving preventive measures aimed at preserving their health, increasing the productivity of animals in modern conditions of animal husbandry and ensuring high productivity of cows. In this regard, the main task is to develop ways to increase insemination of cows with the use of complex and homeopathic treatment. For the first time in the East Kazakhstan region, new scientific data on the main etiological factors leading to gynecological pathology and infertility of cows were obtained. Work has been carried out to improve measures aimed at preventing infertility of cows in the conditions of dairy farming in this region and stimulating increased insemination. New schemes for stimulating increased insemination using hormonal, homeopathic and other drugs have been tested. As a result, an increase in the productivity of cows was revealed, and stimulation schemes were introduced. For the first time in the farm" kamyshinskoye" an economic assessment of the damage from infertility of cows is given. Research work is done between 2016 and 2019 years by the Department of veterinary medicine of the State University named after Shakarim, in the laboratory "Agrotechnopark" of the State University named after Shakarim and national University of veterinary medicine and biotechnology named after Lviv and in the farm "kamyshinskoye" of the Shemonaikha district of East Kazakhstan region. To enhance the insemination of cows 3 groups of animals was obtained: animals of group I were not subjected to insemination; animals of group II for 1-3 hours before insemination grafted surfagon 3 ml (15 mg), 15 ml of Catosal, 15 ml habilita-Se, 10 ml uteroton; 8 days prior to insemination progesterone 2,5% 2 ml, Catosal 15 ml, habilita-Se 15 ml; cows of group III for 30-60 minutes before insemination were given Ovariovitis, and after fertilization Ovariovitis for 25-30 days and liarcine 5 ml. According to the results of drawings based on complex and homeopathic preparations, low costs were shown.

ing the image of a dog. The purpose of this study is to consider the national and cultural specifics, reflected in the stable expressions of the English and Kazakh languages with the "dog" component. The article provides a brief overview of works related to the issues of phraseology in English and Kazakh. The work was based on general scientific methods: induction and deduction, analysis and synthesis. The work with the collected card index of stable expressions was carried out by the method of continuous sampling, using the descriptive-analytical method. An important place in the work with the material was given to the Вестник Инновационного Евразийского университета. 2020. № 4 ISSN 1729-536X 17 methods of definitional, contextual and typological analysis. Using the comparative-comparative method, national-specific and universal features of zoonyms in English and Kazakh languages were determined. The material of the research was a card index of phraseological units of the English and Kazakh languages (more than 160 units) which were selected using the method of continuous sampling from phraseological dictionaries of the English and Kazakh languages. When analyzing the authors of the article relied on materials from phraseological dictionaries in English and Kazakh languages. In the course of the analysis, groups of phraseological units were identified and their differences and similarities in the compared languages were identified, as well as their national and cultural specificity, based on the action of universal cultural codes; the national and cultural specificity of zoonyms is determined by a number of extralinguistic factors: the location of the country, the living conditions of the people, their customs and traditions, history, religion and socio-political structure. All this secures national-specific connotation to zoonyms and determines their productivity. The results of the study showed that through the prism of axiology, an analysis of English and Kazakh stable combinations with the "dog" component, reflecting the paradigm of values (general cultural and national-cultural) and anti-values of the corresponding ethnic communities, was presented, as well as universal values representing at the intercultural level. The results of the study showed that through the prism of axiology, the analysis reflects the paradigm of values (general cultural and national-cultural) and anti-values of the corresponding ethnic communities. The research results have both theoretical and practical significance; it will be additional material for elective courses on the subject of "Lexicology" taught at the faculties of philology and foreign languages in higher educational institutions.

Complex research is carried out on the rational use of natural pastures with seasonal use in a specific area. The research was conducted in 2015-2017 on the lands of “Batyr” farm in Korday district of Zhambyl region. The pasture lands of the farm consists of 5 independent sites and are located in 3 geographical areas: foothill-steppe (950 hа), foothill-dry steppe (1370 hа) and foothill-semi-desert (1880 hа). The total area of distant pastures is 4.200 hectares. As a result of conducting of geobotanical researches, the farm territory of peasant farm "Batyr" in Korday district of Zhambyl region was divided into seasons (spring-summer-autumn) of their use, the yield of natural herbage and live weight gain of animals was determined. Results of accounting of productivity of natural herbages on zones, seasons of year are given in article and the gain of livemass of animals for the pasturable period is defined. When determining efficiency of sheep it is revealed that higher additional weight of a liveweight is received in experimental group of animal. The seasonal pasture on average in three years of researches at the end of the pasturable period provided an increase of a live weight of rams on 3.370 kg/head at ewes on 8.020 kg/head and lambs of birth year on 8.640 kg/head is more in comparison with control groups of animals. It should be noted that for the pasturable period the increase of alive mass of animals in experimental group in 2017 is higher than a research in comparison with previous years. In 2017 at a pasture of animals on seasonal sites it was applied intra seasonal pasture turnover at which unproductive driving of animals in search of a forage on the grazing square is practically reduced three times, besides degradation of the pasturable territory is completely excluded. It was found that the use of seasonal use of pastures provides more weight gain studied animals compared to animals that graze in one place with an unsystematic manner of grazing. The implementation of the results created the conditions for the restoration of degraded pastures with an increase in the growth and development of vegetation cover up to 15-18 % and an increase in livestock production through rational grazing up to 12 %.

The main task of microbiological study of pulmonary patients is to identify the etiology of acute and exacerbation of chronic disease in order to determine therapy and control its effectiveness. Classical methods of microbiological research consist in isolating a pure culture of the causative agent of the disease with its identification by biochemical, antigenic and other characteristics. Such studies are multistage; they impose rather strict requirements on the quality of the source material, the timing and conditions of its transportation, laboratory equipment and the precise execution of the research methodology for at least 3-5 days. Isolation of the culture of a number of pathogens (atypical intracellular microflora, anaerobic bacteria, mycobacterium tuberculosis) requires even more lengthy studies using special media and equipment. This article presents the results of a bacteriological study of pathogenic microflora in diseases of the respiratory system of the population of the Shcherbakty district of Pavlodar region for 2017-2019, including the following sequence: microscopy of native and Gram stained smears; inoculation of biological material on nutrient media for isolation and identification of the pathogen; determination of the sensitivity of the isolated microorganism to antibiotics; immunological (serological) research methods aimed at determining antigens of microbiological origin, as well as antibodies to them in the patient's body. It has been shown that conducting bacteriological studies in accordance with the requirements of regulatory documents allows obtaining reliable and comparable results necessary both for the optimal treatment of patients and for collecting and analyzing data on monitoring the emergence and spread of diseases of the respiratory system caused by pathogenic microflora.

There are many examples of crises and catastrophes in the history of mankind. Almost the entire spectrum of natural disasters is possible in Kazakhstan. In particular, earthquakes, floods, fires in forests and steppes, snowstorms, and others. In all mountain and foothill zones, there is a danger of landslides, the threat of snow drift. In addition, there are situations that have arisen for man-made reasons. These catastrophes are the result of human activity. Such extreme situations require the concentration of all physical and psychological capabilities of a person. This is especially important for military personnel who often operate in extreme or critical conditions. Psychological readiness to solve such situations gives the individual confidence in the correctness of their own actions and, in the end, leads to a successful result. The purpose of this article is to present the results of research in the framework of a master's thesis. The main focus is on the analysis of the features of psychological training of military personnel to act in an extreme situation. The studied problem is revealed by the authors from the point of view of modern approaches to the psychological training of military personnel in a critical situation. The research methods used (analysis, generalization, experiment) allowed us to reveal the depth of the problem relevant to military psychology. The research is based on the results of modern research by Kazakh and foreign scientists. Approaches to the interpretation of the essence of the content of the concept "extreme situation" are considered, and the factors that determine the specifics of psychological training of military personnel to act in a crisis are highlighted. The concept of "psychological readiness of military personnel to work in critical (extreme) situations" is defined. Statistical results of the experiment are presented. The experimental activity carried out in the course of experimental work has a high practical significance, since it was successfully tested through the implementation of the work of the military unit 3176 "K" in Pavlodar and can be used in the psychological training of military personnel. The article is devoted to the actual problem of psychology. The results presented in the article may be useful for military psychologists.

Main problem: In the 18th century, when industrial production began, the use of steam and mechanized production caused major changes in the economy. As a result, production costs decreased along with an increase in the quantity and quality of products. During this period, production underwent a revolutionary transition from manual labor to mechanization. The potential impact of Industry 4.0 on labor markets remains an under-explored scientific field. It is estimated that Industry 4.0 will lead to unemployment by changing the employment structure and will bring new structural problems in terms of unemployment and labor relations. Purpose: The purpose of the study was to establish the impact of Industry 4.0 on the labor market and identify the consequences of the impact. Methods: studied, the evolution of production development, when mass production with electricity led to the Age of Industry 2.0, and then the emergence of the digital revolution, the use of electronics and information technology in production processes, marked the beginning of the Age of Industry 3.0. It is expected, according to international experts, scientists, that automation and robotic production will have a serious impact on the unskilled workforce and cause a critical reduction in the labor force of vulnerable sectors of society, that is, women, migrants, youth and the elderly. Results and their significance: This study assessed the possible impact of the fourth industrial revolution on labor markets. Through a literature review and analysis of emerging trends in Industry 4.0, the risks, opportunities and challenges of the process are explored in a comparative perspective. It has been established that countries must correctly perceive the transformation of labor markets and take appropriate measures. Otherwise, the applied labor-based low-cost industrialization model will lose its comparative advantage

The sharp deterioration of the environmental situation in the Republic of Kazakhstan, associated with human activity and the impact of harmful factors on the environment, affected the quality of food consumed by insufficient consumption of domestic fruit and vegetable products containing vitamins, minerals of an alkaline nature, carbohydrates, vegetable proteins, pectin substances and active fiber. The problem of improving the quality of growing and processing fruits and vegetables is one of the main tasks of the food independence of the Republic of Kazakhstan. Currently, the share of large vegetable farms in the Republic of Kazakhstan is only 10%. The volume of industrial processing of fruit and vegetable crops in Kazakhstan is insignificant. The demand for domestic fruit and vegetable products in the country is met only by 35-40%, most of it is imported from countries such as Russia, Kyrgyzstan, Uzbekistan and China. There is a need for the development of organic vegetable growing in Kazakhstan and the creation of new types of domestic fruit and vegetable products containing a sufficient amount of useful and active substances that can bind and remove toxic substances and radioactive elements from the human body. The purpose of the work is to improve the technology of fruit and vegetable semi-finished products with natural spicy and aromatic additives, to develop a multi-component recipe for vegetable mixtures and a method for producing quick-frozen vegetable mixtures with high quality indicators. These studies were aimed at studying the chemical composition and functional and technological properties of vegetables and spicy - aromatic plants for the content of biogenic compounds: carbohydrates, proteins, vitamins, essential oils, minerals and other substances. The structure of plant tissues was studied and the mass fraction of moisture, dry matter, fiber, mono - and disaccharides, pectin substances, vitamin C was determined, the formulation and production technology of Assorted vegetable mixtures were developed, and quality indicators were determined.

The main problem: This article is devoted to the key problems of the fuel and energy complex of the Republic of Kazakhstan: 1) lack of production capacity to meet the growing demand for energy and fuel from the economy and the population. Increased demand for electricity and heat, which will require the commissioning of new generating capacities.There is already a shortage in the fuel markets. Modernization and bringing the existing oil refineries (hereinafter referred to as refineries) to full capacity will not allow providing the domestic market until 2030; 2) the export orientation of raw materials, the dependence of the economy on the export of energy resources. In order to attract technology and investment in the oil and gas and nuclear industries, agreements on the extraction of energy resources were concluded with international export companies. In the medium term, Kazakhstan may face a shortage of oil for domestic refineries, if measures are not taken to stimulate its refining within the country. The uranium mined is fully exported; 3) high energy intensity of the economy, low level of energy efficiency. There is a high potential for increasing the efficiency of energy use both in the electric power industry and fuel production, and at the level of final consumption – in industry and housing and communal services; 4) decrease in the replenishment and quality of the resource base in the oil and gas, coal and nuclear industries; 5) low environmental friendliness of technologies used in the fuel and energy complex. Purpose: The purpose of the article is to reveal the problem in the field of ensuring the fulfillment of international obligations between different countries and their own energy sufficiency by gradually changing the structure of energy production. Methods: Studying the experience of increasing the efficiency of the use of energy resources and energy saving as a priority of the state policy of the country. Analysis of production capacity with a constantly forecasted shortage of primary energy resources and insufficient growth of capacity for the production of electricity and heat. Consideration of the possibility of compensating for the shortage by saving energy resources, increasing tariffs for energy carriers, as a stimulating factor for their effective use. Results and their significance: The results of this article will reflect the problems of energy, as the most important driving force of global economic progress. The well-being of the people depends on the state of the country's energy sector, therefore there is an urgent need to solve the emerging problems. The global energy problem is, first of all, the issue of stable and efficient supply of fuel and energy to mankind. Today, the energy sector of Kazakhstan is focused on fuel resources, since the country is provided with hydrocarbons and other energy resources. About 72 % of electricity in Kazakhstan is generated from coal, 12,3 % from hydro resources, 10,6 % from gas and 4,9 % from oil. Thus, the four main types of power plants generate 99,8 % of electricity, while alternative sources account for less than 0,2 %.

The main problem: The article deals with the issues of hiding text information in a graphic file. A formula for hiding text information in image pixels is proposed. A steganography scheme for embedding secret text in random image pixels has been developed. Random bytes are pre-embedded in each row of pixels in the source image. As a result of the operations performed, a key image is obtained. The text codes are embedded in random bytes of pixels of a given RGB channel. To form a secret message, the characters of the ASCII code table are used. Demo encryption and decryption programs have been developed in the Python 3.5.2 programming language. A graphic file is used as the decryption key. Purpose: To develop an algorithm for embedding text information in random pixels of an image. Methods: Among the methods of hiding information in graphic images, the LSB method of hiding information is widely used, in which the lower bits in the image bytes responsible for color encoding are replaced by the bits of the secret message. Analysis of methods of hiding information in graphic files and modeling of algorithms showed an increase in the level of protection of hidden information from detection. Results and their significance: Using the proposed steganography scheme and the algorithm for embedding bytes of a secret message in a graphic file, protection against detection of hidden information is significantly increased. The advantage of this steganography scheme is that for decryption, a key image is used, in which random bytes are pre-embedded. In addition, the entire pixel bits of the container image are used to display the color shades. It can also be noted that the developed steganography scheme allows not only to transmit secret information, but also to add digital fingerprints or hidden tags to the image.

The main problem: The rheological properties of calcium salts are of theoretical and practical interest for a modern researcher. The theoretical interest is primarily related to the search for general patterns and manifestations of the rheological properties of solutions of calcium salts. The practical component is based on the search for patterns and dependencies of the properties of solutions on the structure and composition of the object of study. Such chemicals as calcium salts are of particular practical interest, they are widely used in various fields, such as the food, chemical and pharmacological industries. Hydrophilic high-molecular solutions of alginates, namely calcium alginate, are actively used in the preparation of soft dosage forms, the manufacture of jelly masses in confectionery, act as thickeners in the food industry. They are characterized by a fairly high percentage of viscosity at low concentrations, bioavailability, prolonging effect, absence of irritating properties, biocompatibility with many polymers, which is especially important in the pharmaceutical industry and medicine. The use of calcium salts for these purposes is currently very promising, since these organic salts have a number of unique properties associated with gelation. Purpose: This paper contains the results of studying the features of the rheology of calcium alginate solutions. A concentration range of 0.1-0.7 % was chosen for the studies, which is sufficient to avoid gelation at room temperature. The dependence of viscosity on concentration, temperature (in the range of 25-45 °C) and shear rate were studied. Methods: Analysis of theoretical sources, observation, comparison of results. The rheological characteristics of the obtained substances were studied using a capillary viscometer. The measurements were carried out in the temperature range of 25-45°C. Results and their significance: it was found that there is a significant dependence of viscosity on concentration and temperature. For concentrations of 0.3 – 0.7 %, a similar type of dependence is observed, in contrast to solutions with a concentration of 0.1 % . Explanations of these dependencies were proposed.

The article is devoted to the development of a technology for obtaining organic fertilizers from poultry waste based on biocatalytic processes. Currently, many poultry farms have become sources of environmental pollution, thereby causing serious environmental problems and economic and social damage. The problem of reliable protection of the natural environment from pollution by bird droppings is currently relevant. In the area of operation of large poultry farms, air pollution by microorganisms, dust, foul-smelling organic compounds, which are decomposition products of organic waste, as well as nitrogen, sulfur, and carbon oxides, is possible. Bird droppings contain acids, nitrogen, phosphorus and potassium, heavy metals. The content of nitrogen, phosphorus and potassium changes dramatically depending on the quantity and quality of the feed. Humic substances isolated from brown coal have a sufficiently high sorption activity and are used as cheap sorbents for solving a number of environmental problems in industry. These studies are aimed at minimizing the main disadvantage of the anaerobic digestion process, the low reaction rate, which leads to the need to create large-volume bioreactors. On the basis of the research carried out, a technology has been developed for obtaining organic fertilizers from poultry waste by the method of anaerobic fermentation of chicken manure with humidity at a temperature of 27 °C - 50 °C with the addition of sodium humate. The resulting fertilizer is intended for use in agricultural production, horticulture, floriculture, forestry, municipalities, in household plots in order to increase the yield and quality of crop production. For the developed technology, an application has been submitted for obtaining a Patent for the invention of the Republic of Kazakhstan «Method for producing organic fertilizers» (priority No. 2021-22818, dated July 13, 2021). The invention allows to significantly reduce the time of fermentation, to enrich the product with organic and mineral products contained in sodium humate, to convert the salts of heavy metals into an insoluble state, to improve the environmental friendliness of the method.

The development of extraction techniques of medical plants aims to maximize the bioactive compounds production. Тechnologies in this area of industry have not high enough еfficiency factor. In some cases, it reaches only 40-50 %. Therefore, development of new methods to effectively extract different compounds from plant material and their input into large-scale industry is of great importance. The goal is to determine an effective and suitable technology for extracting bioactive compounds from medical plant. This is a narrative review paper which focuses on different extraction methods of medical plant. To find relevant articles for this narrative review, 73 articles were reviewed. Of these, 14 irrelevant documents were discarded. This review analyses various extraction processes to guide the selection of suitable methods for various types of medical plants and applications. This is done by outlining traditional and modern methods of extraction techniques, exploring the importance of solvents for extraction, and comparing novel and alternative methods of extraction. In conclusion, based on the current knowledge, solvent extraction is the most common method for medical plants extraction. Enzymatic hydrolysis and supercritical extraction are advanced techniques with high yield of compounds. However, more research is needed for some modern extraction methods.

Main problem: The key task of the development of the regions of the Republic of Kazakhstan is to ensure their sustainable socio-economic development by increasing its competitiveness and innovation activity. To develop a successful strategy, as well as for its subsequent successful implementation, it is necessary to have a clear vision and idea of what the region will be like in the near future. This vision should be clearly formulated and understood by all interested parties in order to properly coordinate efforts in achieving the set goals. In turn, based on the vision, various initiatives and activities are being formed, the implementation of which is aimed at implementing the main directions of sustainable development of the region. Purpose: to consider the main directions of the implementation of the strategy of competitive, sustainable and safe development of the region. Methods: The theoretical and methodological basis was the concepts, hypotheses and theories presented in the works of domestic and foreign researchers. The methodology is based on a systematic approach, within which methods of comparative, factorial, subject-object; structural-functional, statistical analysis and extrapolation have been applied. Results and their significance: In order to ensure the sustainable development of the Pavlodar region in the future, there is a need to form the basis for the creation of new sectors, as well as to consider opportunities to diversify the regional economy. Currently, there is a structural change in jobs, which leads to an increased role of professional services industries in the field of information technology, engineering. It should be noted that the level of development of small, medium-sized businesses and entrepreneurship in the region is at a low level, due to the predominance of resource sectors in the economy. These sectors, due to the peculiarities of the technological process, do not form a system of suppliers around themselves. However, in order to ensure the progressive development of the industrial complex in the region, it is important to create conditions for the development of SMEs in the region and, accordingly, a system of suppliers around leading manufacturing enterprises. The high competitiveness of the Pavlodar region in the future until 2030 will be ensured through the development of priority clusters, as well as through the emergence of new industrial sectors of the economy. Thus, the priority clusters of «today» include: metallurgical cluster, including the production of end products; cluster of railway engineering; agro-food cluster.

Main problem: Today electronic information is one of the important resources in the management system. Electronic information resources are not only means, but also control flows. For example, any instruction or instruction in the management system is actually a guide to action. At the same time, for example, data on the movement of an object (employees, goods, money, etc.) are information resources, the storage and accounting of which is the basis of the organizational process. Large flows of information require their structuring, and operations on them become time-consuming. One of the ways to solve this problem is the development and implementation of an information system. Purpose: To analyze and design an information system using specialized tools designed to optimize the implementation of the above stages of software system development, using the example of a real business process. Methods: The article discusses the methodologies of CASE tools designed to automate software development processes, namely, the first two stages of the life cycle: analysis and design of a software product. The analysis and design of the business process functionality is carried out using the IDEF0 functional modeling methodology. The design of the database structure of the information system was carried out using the methodology of semantic (information) modeling IDEF1X. Description of the scenario of the designed software for a real business process is carried out using the dynamic modeling methodology IDEF3. Results and their significance: The article substantiates the relevance of the use of modern CASE-technologies in the process of analyzing and designing a future information system, as well as for the purpose of possible optimization on the example of a real business process "Inventory accounting". As a result, a comprehensive business process model was built using tools based on CASE-methodologies. The resulting model, as well as the description of its construction, is a clear example of the use of CASE technologies for software developers, as well as system analysts and IT specialists.

Main problem: Bird droppings and animal manure contain acids, nitrogen, phosphorus and potassium, heavy metals. The content of nitrogen, phosphorus and potassium changes dramatically depending on the quantity and quality of the feed. Purpose: To study the effectiveness of the use of organomineral fertilizer from poultry waste, obtained using biocatalytic processes on the growth and development of plants. Methods: An application for a Patent for the invention of the Republic of Kazakhstan "Method of obtaining organic fertilizer" has been submitted for the developed technology for obtaining organic-mineral fertilizer. In the soil intended for growing seedlings of tomatoes of the “Pepper-shaped Orange” variety and peppers of the “Bogatyr” variety, the resulting fertilizer was applied in the amount of 1 kg per 1 m2 of soil, which was dug to a depth of 8-10 cm and used to grow seedlings in closed ground and subsequent for planting it in open ground. Soil without fertilization was used as a control. The process of soil preparation for open ground, intended for planting seedlings, was carried out for the experimental field with the introduction and control without fertilization. Experimental and control studies were carried out under equivalent climatic conditions, the scheme and technology of watering plants. In total, 100 bushes of each plant species were used in the experiment. Results and their significance: The use of the obtained organomineral fertilizer allows to increase the yield of vegetable crops (tomatoes, peppers) by 20-25% compared to the control. In addition, in the experimental samples, an increase in the number of fruits on a bush was noted with an increase in their size, a decrease in the growing season and the number of damaged fruits.

The main problem: Modern research in the development of fermented milk products is focused on increasing the bioavailability of milk components, as well as the use of bacterial components of sourdough, which increase health properties. The use of the fermentation process of skimmed milk with a combined starter consisting of traditional for cottage cheese and starter cultures of probiotic cultures immobilized in a gel of biopolymers is very important. Purpose: The purpose of this study is to determine the optimal amount of starter, consisting of an association of probiotic cultures immobilized in a gel of biopolymers (membranes) to be added to fermented skimmed milk in order to enrich it with functional ingredients. Methods: A one-factor experiment was used. The culture association Propionibacterium freudenreichii subsp. was used as a regulatory factor. Shermanii, Bifidobacterium lactis and Streptococcus thermophilus, immobilized in a biopolymer gel, added to skimmed milk in the form of membranes (determined as a percentage of the mass of fermented milk). Controlled factors are the main indicators characterizing the efficiency of the skim milk fermentation process; these are active acidity, the logarithm of the number of viable cells of bifidobacteria, the logarithm of the number of viable cells of propionic acid bacteria, and organoleptic evaluation. Results and their significance: Based on the results of a mathematical analysis of the totality of values of controlled factors depending on the amount of starter cultures of probiotic cultures, mathematical models were built to determine the degree of influence of the starter on the quality indicators of the product, using the Table Curve 3D-v4 mathematical computer program.

In modern conditions, the problem of the incidence of cows with high productivity in the postpartum period is relevant. It is these animals that are more susceptible to various diseases, primarily due to violations of the technology of keeping and feeding, weak body resistance, heavy loads during fruiting and milk production. It is known that as a result of various metabolic disorders, calving of cows in farms proceeds with various deviations. The lack of calcium in the blood due to hormonal disorders leads to hypocalcemia and paresis after calving, which is often the cause of death of animals. Therefore, the improvement of prevention schemes and treatment of puerperal paresis in cows is very relevant. Purpose of the article – Improvement of preventive and therapeutic measures for postpartum paresis in cows on the basis of the Tassu farm in Akmola district. The work was carried out under production conditions on a livestock farm in the Akmola region, in the farm "Tassu" in the spring and summer. The object of the study were black-motley cows with a pregnancy period of 250-260 days. 22 animals were selected in the experimental group, 12 animals in the control group. The average weight of animals is 567 ± 34.5 kg, age 5-6 years. The cows of the experimental group received injections of the drug Karsulen, which included: 2 % Cardus marianus D3, 1 % Sulfur D6 and 1 % Arsenycum album D6. Karsulen was administered to cows intramuscularly or subcutaneously at the rate of 1 ml per 100 kg of animal weight, the dose volume should not be less than 5 ml per animal. In the postpartum period, in the complex therapy of postpartum paresis in cows, Karsulen is used intramuscularly or subcutaneously 1-2 times a day. The use of the drug Karsulen with the composition: 1 % Cardus marianus D3, 1 % Sulfur D6 and 1 % Arsenycum album D6 has a regulatory effect on protein, carbohydrate, fat metabolism, restores impaired function of the gastrointestinal tract, liver and kidneys.

Injuries among domestic animals account for 50-70 % of all non-communicable diseases. Fractures of bones, mainly limbs, occur in 44.5 % of cases. The main goal of fracture treatment is to restore normal function and movement of the limb, and the ways in which this is done are varied. Preference is given to methods that do not constrain the movement of the limb, allowing the animal to use it during the treatment period. Purpose: This article discusses the method of bone osteosynthesis, which has proven itself in the treatment of bone fractures, and is relevant today in veterinary medicine. The main study was conducted on the basis of the veterinary clinic "Shans" in Pavlodar. For osteosynthesis, plates for osteosynthesis and screws made of titanium alloy were used. This is due to the fact that when in contact with each other, the metal that fixes bone fragments can oxidize. Animals come to the clinic as a result of injuries that lead to fractures. The most common causes include falls from a height, motor vehicles, careless or rough handling of animals, and contact with other animals. When a fracture is established by obvious signs or if a fracture is suspected, such patients are preliminarily sent for x-rays. Upon receipt of an X-ray image and with the consent of the owner of the animal, osteosynthesis is performed. When accessing bone fragments, the incision was made along the muscle fibers. Osteosynthesis was performed according to the method described by V.M. Shapovalov (2009). The general condition of the animals after osteosynthesis was restored after 3-5 days. All animals, after bone osteosynthesis, completely relied on the limb. Contractures of adjacent joints and muscle atrophy were not determined. Plain osteosynthesis of the femur, in the presence of the necessary instrument and consumables, is not very difficult to perform. Performing bone osteosynthesis in the early stages makes it possible to include the limb in the locomotory act, as a result of which the animal actively uses the limb during the rehabilitation period.

Main problem: recently, much attention has been paid to energy saving in production, especially when it comes to industrial units that burn fuel. There are several ways to maximize the use of the heat released during the combustion process, for example, to reduce the temperature of the flue gases at the outlet of the unit, by maximizing its use, both in the technological process itself and by installing additional heat-receiving units, for example, air heaters or other heaters. Another way to save money is to reduce heat losses through the lining of these high-temperature units. Metallurgical units that consume a large amount of energy and fuel require an analysis of their consumption, and ways to save their consumption based on the results of the analysis. Purpose: this article considers the possibility of replacing the existing inner insulation layer of the second and third sections of a high-temperature unit - a metallurgical furnace, with a new one with better technical and economic indicators. Methods: the possibility of replacing the existing inner insulation layer of the second and third sections of the high-temperature unit with a new one, with the best technical and economic indicators, was considered. The calculation of heat losses by thermal conductivity through the side surfaces and the roof with new insulation was performed, and the economic efficiency of the proposed solution was proved. Results and their significance: replacing the existing inner layer of insulation - refractory concrete PHLOCAST M30 (thermal conductivity coefficient from 1,4 to 1,45) with the proposed CERALIT GUN HK 70070 (thermal conductivity coefficient from 1,03 to 1,12) will reduce heat loss to the environment, and thus to reduce fuel consumption for the furnace.

The production of vaccine preparations before release requires standardization of their immunobiological parameters, especially safety and immunogenic efficacy. An indicator of the immunogenic effectiveness of the lumpy skin disease vaccine is the resistance of vaccinated cattle against the virulent virus. However, according to preliminary studies, the virulent control virus did not always cause clinical disease with characteristic symptoms when infected subcutaneously. The purpose is to develop a biological model in the form of a complex consisting of a pathogenic virus, a method of infection and a susceptible animal to assess the immunogenicity of a lumpy skin disease vaccine. Local cattle, intact from lumpy dermatitis, were used to reproduce lumpy dermatitis and develop the causative agent of the disease. As the initial infectious virus, we used a 20 % tissue suspension of nodules (skin nodules) obtained from cattle that fell ill with lumpy dermatitis in the field in the Atyrau region in 2016. As a viral mass to control immunogenicity, a 20 % suspension of skin nodules and edematous skin tissue at the site of the pathogen injection, obtained after the “refreshment” of the virus in animals, were used. The disease was reproduced by infection with the test suspension of the virus intradermally, subcutaneously, intravenously at a dose of 0.5 cm3 and titration on the skin of the animal. The effectiveness of the biological model was assessed by morbidity, severity of the course and severity of the manifestation of the disease. During primary intradermal infection with a field isolate of the virus, the disease manifested itself in one of three animals in the form of hyperthermia, depression, lacrimation, and the appearance of several nodular nodules in the skin of animals. The refreshed tissue virus caused clinical disease both in subcutaneous, intradermal and intravenous infection. But the clinical signs of the disease were more pronounced with intradermal inoculation of the virus, and with intravenous inoculation, it manifested itself in a more severe form with a fatal outcome. Inoculation of the virus intradermally into different areas of the skin led to the development of an independent skin lesion in each infected point in the form of painful edema, followed by necrosis, the size and intensity of which depended on the dose of the injected virus. This development of skin pathology made it possible to work out a method for determining the virus titer in vivo. The tissue virus obtained from the edematous tissue at the site of the pathogen injection was guaranteed to cause clinical disease in cattle during intradermal inoculation and made it possible to evaluate the immunogenic efficacy of the produced batches of vaccine against lumpy dermatitis.

The degree of dаmаge to deer by the lаrvаe of Oedemаgenа tаrаndi of the Hypodermаtidаe fаmily depends on the number of femаles of the subcutаneous gаdfly in the summer. For the development of meаsures to combаt deer gаdflies, vаrious methods hаve been tested over the yeаrs, аmong them methods of wаtering аnd externаl locаl аpplicаtion. For this purpose, mаny reseаrchers tested dipterex (80 %), crystаlline chlorophos (97 %) in the form of аn 8 % solution, tiguvon, ricifon, dioxаfos, sulfidophos-20 аnd ectopor (2 % cypermethrin) аnd other drugs. Vаrbeks 35 %, Bаytex-50, Fenthion-50, Nаtаsol аnd Etаcid, etc. were tested intrаmusculаrly in vаrious doses on deer. The purpose is to study the prevаlence аnd effectiveness of the treаtment of edemаgenosis in sikа deer in the Ussuriysk urbаn district. The reseаrch wаs cаrried out аt the deer fаrm "Borisovskаyа". For the experiment, three groups of deer were formed with 6 heаds eаch. In order to study the therаpeutic аnd prophylаctic efficаcy of the two groups of drugs Аversect-2 аnd Dectomаx, the аnimаls of the first experimentаl group were injected with the drug Аversect-2 subcutаneously аt the rаte of 1 ml per 50 kg of аnimаl weight, deer of the second experimentаl group were injected subcutаneously with Dectomаx аt а dose of 0.2 mg per 1 kg of mаss, which corresponds to 1 ml of solution per 50 kg of mаss. The prepаrаtions were аdministered immediаtely аfter the end of the summer of gаdflies (end of July-beginning of Аugust). The third group of deer did not receive drugs, аnd it remаined the control group. The incidence of sikа deer entomosis in the Ussuriysk urbаn district for three yeаrs wаs quite high аnd remаined аt the sаme level for аlmost the entire period (43.21-48.8), with а slight decreаse in 2021 to 37.4 %, which wаs most likely due to the climаtic conditions of this period. Of the two selected drugs with seemingly the sаme spectrum of аction, the best results were obtаined on the deer of the second experimentаl group, where the drug "Dektomаx" wаs used, while the EI wаs significаntly (two times) lower thаn in the first experimentаl group аnd аmounted to 16.7 % versus 33. 3 %, аnd АI - 0.03, аgаinst 0.83.

In order to successfully conduct agricultural work and obtain a competitive harvest, it is mandatory to carry out spraying operations of crops that require highly qualified personnel, expensive equipment and suitable weather conditions. The use of tractors for spraying fields is the most common solution available at the moment, has disadvantages: high cost, risk of damage to the crop by "hitting", "hooking" or otherwise; environmental damage; due to exhaust gases, the demolition of the solution increases with increasing speed. Using a device designed specifically for spraying equipment is an ideal solution. The purpose of the article is to develop a working model of an automated sprayer for processing agricultural crops. The methods used are: technical justification of a controlled device for processing agricultural crops. Calculation of functional capabilities, algorithms of operation of the proposed automated device: selection of the type of sprayer, engine, chassis, controller, battery, as well as justification of the possibilities of using alternative energy sources (wind energy, solar energy); development of a 3D model of an automation device for anti-weed processing of agricultural crops, printing of parts, assembly of mechanical and electronic parts. Making a prototype using 3D printing; development of the wiring diagram of electronics, software (firmware of the microcontroller; application that controls the settings), testing of the prototype, assembly of the current model; rationale for the optimal use of Arduino and Raspberry Pi boards in this device in a pair: Raspberry Pi will allow you to control processes on the Arduino and easily interact with the Internet when the Arduino itself will perform simple operations such as interacting with electronics and reading sensor readings. The manufactured operating model showed compliance with the goals, a high degree of controllability, environmental friendliness, reduction of energy consumed, labor resources and can be used to scale this device. The developed model of the automation device for anti-weed treatment of agricultural crops can be used not only in agricultural pollination, but also as a mechanism for studying soil parameters: humidity, mineralogical composition and chemical content in the ground, using electronic sensors, as well as an automated mobile platform for any purpose requiring accurate navigation through the territory.

Main problem: the article is devoted to the issue of designing basic recipes for dairy products using mathematical modeling methods. The author analyzed the problems in the field of food technology and concluded that mathematical modeling is used in the following areas: clarification of technological process modes, designing recipes and assessing the quality of finished products, as well as predicting the shelf life of new products when they are put into production. The use of dihydroquercetin as a drug that prevents the oxidation of milk fat in the design of dairy products is substantiated. Mathematical modeling was carried out on the basis of experimental and analytical material obtained in laboratory and production conditions. Based on the maximum value of the objective functions, the optimal normalized mixtures and the maximum allowable concentration of dihydroquercetin were selected. The analysis of the received mathematical dependences and models is carried out, the system of linear equations is made. Purpose: to study the effect of natural bioflavonoid antioxidant on the oxidative processes of milk fat and the viability of lactic acid cultures and their associations by mathematical modeling in order to use it in the technology of a new product; conduct an analysis of mathematical dependencies and models, compose a system of linear equations. Methods: the article uses the method of mathematical analysis and the matrix method. Results and their significance: a mathematical model was developed for the dependence of the viability of probiotic cultures on the mass fraction of dihydroquercetin when designing recipes for a creamy-protein curd product, a matrix of the chemical composition of dairy ingredients was presented, and a system of linear equations for basic recipes was compiled. In the course of the study, the spatial configurations of dihydroquercetin, as well as its effect on the oxidative processes of milk fat, were studied. Mathematical modeling of experimental data on the study of the effect of dihydroquercetin on the viability of microorganisms with probiotic properties was carried out. The normalization of the complex of obtained results on the study of the influence of the mass fraction of dihydroquercetin on the fermentation process was studied. Controlled factors characterizing the process of fermentation of model media with dihydroquercetin have been determined. A rationing of the dihydroquercetin complex of more than 0.50% was established; the target function decreases to its minimum value of 0.53 with a mass fraction of dihydroquercetin of 1.00%.

In the dairy market of Kazakhstan, the demand for mass-produced dairy products is decreasing and expanding to innovative fermented milk products for functional nutrition. The main feature of the new technology is multicomponent formulations, which include the main raw materials and biocorrectors, ensuring their high biological and nutritional value. New dessert products are prepared on a dairy or protein basis using vegetable ingredients, fermented with strains of dry starter cultures of direct application or immobilized starter culture Bifimm probio. The purpose is to apply immobilized living cells of pure cultures of lacto- and bifidobacteria as a biocatalyst for the fermentation of dairy-vegetable media. During the study, the method of immobilization of microbial cells in biopolymer gels was used. The most effective method is the inclusion of cells in an aqueous solution of biopolymers with a concentration of 25 %. For immobilization, pure cultures of lactic acid and bifidobacteria were selected in the gel as part of the concentrates "BK-Altai-LS Bifi", "Poleznaya Partiya", "Genesis", "Narine", "Bio-yogurt Vivo", and the main prescription ingredients were selected: milk with a mass fraction of fat of 1 %, 2.5 %, 3.2 %, natural grain additives, jams, juices, nuts. Formulations, technological schemes and production methods, prototypes were developed, quality and safety indicators were determined. Studies have shown the effectiveness of immobilized starter cultures in the formation of fermented dessert products. Out of 20 prototypes with the best indicators, 5 samples were selected, in which the optimal ratio of milk, probio Bifimm starter cultures and biocorrectors averaged 70:20:10. The quality and safety analysis showed that new fermented milk products using immobilized starter cultures have a positive effect of more than -70 % compared to direct-use starter cultures, have functional properties and can be used for healthy nutrition in Kazakhstan.

The article discusses the experience of developing a computer video game by a team of students of the Department of Information Technology of the Innovative University of Eurasia within the 48-hour competition «48h Game Making Challenge» for creating video games, held in Pavlodar on October 27-29, 2022 in the IT-Hub building of the College of Information Technologies (93 Lermontov St.). Basic information about the event and a link to the registration form were published on the Instagram @digital_drive14 social network page and on the website https://digitaldrive.kz /. 8 teams from different educational institutions of Pavlodar participated in the competition. The purpose of the article is to comprehend the practical experience of developing a computer game. The team chose the Unity game engine as the environment and the main tool for developing a computer game. The Unity program is a popular development environment for interactive 2D and 3D content. The engine is completely free for the average user. The Unity engine was also chosen because it is multifunctional and uses a component-oriented approach, in which the developer creates objects and adds various components to them. The advantage of the engine was also the presence of a huge library of assets and plugins, with which you can significantly speed up the game development process. The graphics of the game were made in Photoshop. The music and sounds were taken from free sources. InEU team developed a computer game «Conqueror of the Moon» and became the winner of the contest «48 Hour Game Making Challenge Pavlodar 2022». During the development of the game, the team first chose the engine, developed the plot and concept of the game, created an image for the level and menu. Then the programmer developed the mechanics of the game, wrote code for control, time, dialogues, messages. The designers drew the environment, background, characters, created all the animations for the game and found music for the background of the menu and the game itself.

In this article, comprehensive studies have been conducted on the rational use of natural pastures, taking into account the seasons and typology, which allows increasing the grazing capacity of forage lands, as well as obtaining high-grade valuable and cheap livestock products. Rational maintenance of livestock on pastures not only reduces fuel costs by 6-7 times, equipment, labor and total feed costs by 2-3 times compared to the content of grazed animals, but also improves metabolic processes and reproductive functions of animals. This determines the great advantage of pasture feeding in the production of important livestock products. In the conditions of vertical zonality of the Zhambyl region, a significant reserve for increasing the production of mutton is their grazing on pasture with the use of pasture turnover; which allows the most efficient use of natural forage lands, increase the live weight and fatness of animals.

Increasing the yield of sunflower is inextricably linked with the evaluation of newly created interline hybrids and their components (parental forms) using various methods for assessing their combination ability (CА). Breeding research in this direction includes large material and practical costs when using the developed methods for assessing combination ability (CА) due to its small analytical capabilities. New approaches to the analysis of the productivity of hybrids in practical studies can significantly increase the volume of the analyzed material and evaluate not only for a short period of testing, but also for a long period of time over the years. Purpose is determination of the combination ability of parental forms of sunflower interlinear hybrids to optimize the breeding process. When analyzing the determination of the combination ability of the parental components of sunflower interlinear hybrids, the method of evaluating the CА according to a special scale developed at VNIIMK (Krasnodar, Russia) was used. This method makes it possible to analyze a large number of hybrid combinations and their parental forms and draw appropriate conclusions for further use in the breeding process. The analysis of the obtained results makes it possible to fully evaluate the obtained interline hybrid combinations by years of testing. We analyzed 1736 hybrid combinations involving 212 maternal forms and 1472 combinations involving 209 paternal pollen fertility restorer lines. 75 maternal lines with a high total combination ability (GCА) and 97 paternal forms with this trait were identified. Maternal lines with high combinational ability VKU 110 A, VKU 140 A and SV 55 A are of interest for use in practical breeding. Among the paternal forms are SV 123 V, VKU 400 V and VKU 401 V. The components of hybrid combinations with high specific combination ability (SCА) have been determined. These are lines VKU 414 A, VKU 413 A, SV 31 Rf, SP 1459. Hybrids with high adaptive properties have been identified when growing conditions change, which will make it possible to purposefully conduct practical breeding to maintain high productivity of sunflower hybrids

The article is devoted to the development of technological parameters for the production of gluten-free pasta, as well as to the study of the influence of physico-chemical factors on the formation of the structure and organoleptic parameters of gluten-free pasta. The authors studied modern approaches to the production of gluten-free food in Kazakhstan. During the study, the main types of raw materials used in the production of gluten-free pasta of functional orientation were identified. For the production of a new product, a reasonable choice of raw materials and functional ingredients was carried out, the formulation and production technology were developed, all temperature and time modes were described, physico-chemical, organoleptic parameters of the new product were studied, a production flowchart was developed. The purpose of the article is to develop the technology of gluten-free pasta enriched on the basis of corn, rice flour and meeting the requirements for specialized food products, with the addition of functional and flavoring ingredients to expand the range of gluten-free products in the Republic of Kazakhstan. In experimental studies, the formula of a new gluten-free paste based on rice and corn flour with the addition of flaxseed flour, soy protein isolate «EdimCo», xanthan gum, dietary fiber (psyllium), Supermak booster was developed. The complex results of organoleptic and physico-chemical parameters of whole-grain flour for the production of new gluten-free pasta are presented. The results of organoleptic and physico-chemical indicators, as well as safety indicators of finished gluten-free pasta are presented. The article presents the technological parameters and time modes of the production process of fresh pasta, including the following basic operations: preparation of raw materials at t = 10 0C, kneading pasta dough at t = 40-45 0C, vacuuming at 40-10 kPa, pressing (extrusion) at 7 min, 10-12 MPa, drying and stabilization at 10-12 MPa, cooling of dried products t = 20-25 0C 4 hours, packaging of finished products at t = 35 0C and relative humidity 70 %.

The article is devoted to the study of the reaction of hydromentoxycarbonylation of isobutylene in the presence of palladium phosphine complexes in order to optimize the method of obtaining menthyl ether of isovaleric acid, which is the main component of the drug «Validol». The purpose of the article is to improve the methods of obtaining menthyl ether of isovaleric acid (the main active component of the drug "Validol") and to study the reaction of hudromentoxycarbonylation with l-menthol and carbon monoxide of isobutylene in the presence of homogeneous catalytic systems based on palladium phosphine complexes. The article presents studies on the content of validol from various types of raw materials by the method of GC analysis. In the commercial samples of validol obtained from natural l-menthol and industrial isovaleric acid (obtained as a result of the oxidation of "fermentation isoamyl alcohol"), there are 2 components (l-menthyl ether of l-menthol and isovaleric acid), additionally 2 % menthene hydrocarbon and 23 % L-menthyl ether of methyl ethylacetic acid. A probabilistic mechanism of the reaction of the hydromentoxycarbonylation of isobutylene with l-menthol and with carbon monoxide and in the presence of catalytic systems based on the studied palladium phosphine complexes is proposed.

Phytopathological Assessment of Sunflower Genetic Resources in Relation to Vegetative Conditions in the East Kazakhstan Region during 2021-2023

Main problem: digital transformation of Kazakhstan’s society leads to emergence of new communication business models, including the so-called proactive data-based service, which implies expansion of communication contact between the state, business and society. Digital transformation of economic sectors and the service sector has objectively caused discussion of issues related to various aspects of its implementation. These include digitalization of society spheres within framework of public administration [1], problems of interaction between business and government [2], mechanisms of interaction between subjects in the private-public partnership model of government and business [3], description of communication models of business types, government and public sector [4], history of emergence of electronic trade, its forms and types of goods delivery to a consumer [5], organizational and managerial relations and processes arising in enterprises, working in field of online marketing and e-commerce [6]. In Kazakhstan, digitalization of spheres and the economy sectors is one of strategic priorities of its development. Use of information and communication technologies in the service sector creates additional impulses to its dynamics, therefore, has impact on improving population’s life quality. In this regard, it is necessary to identify trends and patterns of communication interaction between the state, business and society, to consider and clarify their content. The purpose: the research of state and trends in the development of Kazakhstan service sector under the influence of digital solutions and expansion of communicative contact between the state, business and society. Methods: the performed analysis in the research is based on the materials of the statistical reviews and their analysis using the methods of grouping, generalization, logical analysis, system description and interpretation. Results and their value: a range of the key problems of communication interaction between the state, business and society is investigated and determined. Recommendations are proposed to accelerate the development of e-commerce in Kazakhstan as a tool for communication interaction between business and society and improving population’s life quality.

The article is devoted to the development of technology for meat products of the "Halal" category. The authors consider the main problems of the meat industry in the field of the development of meat products of the "Halal" category in accordance with the National Program "Development of meat farming for 2018-2027", as well as the peculiarities of the production of meat products of the "Halal" category in Kazakhstan. A technology for the production of sausages for frying of the "Halal" category based on minced turkey and beef meat for functional nutrition has been developed, organoleptic, physico-chemical parameters of the new product have been studied. The mass fraction of protein is 8 %, the mass fraction of fat is 7 %. The authors of the article have developed a technological scheme for the production of a new product of the "Halal" category, which includes: acceptance of raw materials, cutting, deboning, veining, grinding to 2-3 mm of meat raw materials. At the next stage, meat is cooked at t 2-4 0C for 12 hours, minced meat is prepared (adding jerusalem artichoke 3 %, adding vitamin premix "Rovifarin" in an amount of 1.0 %, as well as spices and garlic according to the developed recipe). At the next stage, the minced meat is stuffed into natural shells with a diameter of (32-44) mm, cooled at t (4 + 2) 0C, stored at t (4 + 2) 0C for 36 hours. During the microstructural study of a sample of boiled and smoked sausage produced using traditional technology, it was found that the mass of the sample was formed from large fragments of muscle, fat and connective tissue (0.7-1.4) microns. The layout of the structural elements of the minced meat is dense, vacuoles and microcapillaries are rounded in shape, sometimes without clear boundaries, merged, with a size of (60-300) microns.