The scientific journal

Bulletin of the Innovative University of Eurasia

Submit an article for review by the editorial board

+7 (7182) 31-64-83

journal@ineu.kz

Back

Search on site

Search results: Line

Number of results: 47


Technology of electronic distance course development for the adaptation of employees to activities in the enterprise
Annotation:

The authors consider the need to adapt new employees at the enterprise through the use of an electronic course. The article provides definitions of the concepts "e-course", "adaptive e-course". The adaptive e-course is a course designed to familiarize new employees with the history, structure and corporate values of t he company, allowing the new employee to be adapted to unusual labor and psychological factors. The analysis of adaptive courses is carried out and the main technologies of e– course development are highlighted (virtual and augmented reality technologies, gamification, online chats, LMS and corporate learning portals, machine learning and artificial intelligence, learning Analytics and BigData, storytelling). The advantages of storytelling technology in the development of an adaptive e -course, especially in providing psychological support during the adaptation period, are considered.

Year of release: 2020
Number of the journal: 1(77)

Rare species of reptiles of the Nakhchivan Autonomous Republic
Annotation:

Based on the analysis of own and literature data 9 numerically insignificant species of reptiles were found at the territory of the autonomous republic. One of these species belongs to a group of turtles (Testudines), three of them belong to a group of lizards (Sauria) and five of them belong to a group snakes (Serpentes). Systematics, ecological and some biological peculiarities of species are reflected in the article. During the research previously registered Psammophis lineolatus has not been found and its existence at the territory of the Nakhichevan Autonomous Republic is under question.

Author: A.F.Mamedov
Year of release: 2014
Number of the journal: 1(53)
Heading: Natural sciences

Formation of universal educational actions at primary school through geometrical trainig
Annotation:

The mathematical education of a pripary schoolchild is one of the directions at primary school. It gives an opportunity to a schoolchild to master successfully the program of secondary and high school. The question of education actions formation for junior schoolchildren through geometric training is considered in this article.

Year of release:
Number of the journal:

Test gauges as a means of assessing learning achievements of students
Annotation:

The main purpose of the new test materials: tests, test items is an objective assessment of the level of mastery of knowledge , skills and abilities , relevant state general education standards in mathematics and the ability to apply them in real life ( in extracurricular life situations ). The article deals with technology making control gauges in mathematics at the secondary school, is an example of the development of such a meter

Year of release:
Number of the journal:
Heading: Social sciences

Antimicrobial effects of natural honey
Annotation:

This article is written in line with the important questions on antimicrobial effects of natural honey against gram-positive bacteria to reveal the therapeutic properties. These circumstances demonstrate the medical and social significance of solving the science-oriented task of developing high-quality pharmaceutical product on the basis of honey as well as its application not only as a preventive and medicinal agent to treat many illnesses but also as in beauty treatment.

Year of release: 2015
Number of the journal: 2(58)
Heading: Natural sciences

Formation of spiritual and moral values among pupils through the "Self-knowledge" discipline
Annotation:

In the article, the questions of functioning of "self-knowledge" discipline in the school curriculum, setting goals and tasks in the process of educating the younger generation are considered. Based on the ideas of the spiritual and moral education of students.

Year of release: 2016
Number of the journal: 3(63)

Formation of students professional skills in the teaching of pedagogical disciplines
Annotation:

The article discusses ways of forming students’ professional abilities in the course of studying pedagogical disciplines. Methods of teaching within the Competence Approach and Learner Centered Approach as well as views of scholars researching Competence as a concept are described.

Year of release: 2016
Number of the journal: 4(64)

Improvement of Kazakh horses of zhabe type by breeding by lines
Annotation:

The article emphasizes the importance of carrying out breeding work with Kazakh horses of the zhabe type, which are of great importance for the productive horse breeding industry. The results of selection experiments on improving breeding and productive qualities are presented on the example of the Kazakh zhabe horses of Seletiinsky factory type at a stud farm "Altai Karpik Saydaly-Sartoka" of the Irtysh district of the Pavlodar region.

Year of release: 2017
Number of the journal: 3(67)

The innovative system of educational principles in the system of multilingual education
Annotation:

The article deals with the problems of the formation and development of a multilingual education, the mechanism for the training of multilingual specialists in the educational system of Kazakhstan. The multilingual education as an effective tool for training the younger generation for life in an interconnected and interdependent world is considered.

Year of release: 2017
Number of the journal: 3(67)

Advantages of introducing elements of a quality management system in the construction of highways
Annotation:

The main provisions of the road quality management concept are outlined, as well as the tasks are defined that need to be solved in order to ensure the management of the system at three levels: strategic, tactical and operational.

Year of release: 2017
Number of the journal: 4(68)

Peculiarities of the method of teaching discipline
Annotation:

"Information communication technologies" in English language Annotation. The article discusses the use of the CLIL (Content and Language Integrated Learning) methodology in the teaching of the discipline "Information and Communication Technologies" in English. The use of this technology in polylingual groups is most appropriate, since the CLIL pursues two goals, namely, the study of the subject through a foreign language, and a foreign language through the taught subject. Integrability is determined by the fundamental nature of ICT and the nature of the basic objects of its study; the ability to work with information refers to general educational skills. Teaching ICT in English allows students to look at English from an information point of view. To assimilate the material, the already existing knowledge of students in the user aspect is reinforced, relying on the basic concepts of ICT and competence in the field of informatics, expanding the literacy skills of ICT tools and English-language software, enriching vocabulary in English, forming orientation skills in the English interface of applied and office programs ..

Year of release: 2017
Number of the journal: 4(68)
Heading: Natural sciences

Research in the development of an adaptive and multifunctional online store
Annotation:

The article is available the problem of developing an online store. National statistics of the Republic of Kazakhstan for 2018. The advantage of the developed online store "EComKZ" and client-server application "EComQazaqstan". Services from Google companies are described, NoSQL databases are reviewed, and tools for creating an online store are provided.

Year of release: 2019
Number of the journal: 1(73)

Didactic aspects purpose in teaching natural knowledge
Annotation:

The article proposes a solution to the problem of goal-setting from the standpoint of activity and competency-based approaches. Concrete formulations of the goals and objectives of the academic disciplines "Methodology of Teaching Natural Sciences" and the school course "Natural Sciences" are given. The choice of these disciplines to illustrate examples of the formulation of the learning goal is determined by their specificity. Since in the course of “Natural Sciences”, students should learn the initial concepts of natural sciences (biology, geography, ecology, human physiology, history of society, etc.), the proposed examples of the wording of the goals and objectives of science lessons will help, according to the authors, teachers and other specialists in the field of education to formulate, by analogy, the goals of disciplines from other areas of science. The specificity of the school course "Natural Sciences" determines the specifics of the theory and technology of teaching this discipline. The wordings of the goals and objectives of the course “Methods of Teaching Natural Sciences” proposed by the authors are developed in accordance with the goals and objectives of the school discipline “Natural Sciences” in compliance with the logic of presentation, a sufficient degree of validity and convincing conclusions, as well as taking into account the specifics of the subject and the didactic principle of continuity.

Year of release: 2019
Number of the journal: 4(76)

Building an optimization model energy-efficient mode of functioning energy-intensive production based on a fuzzy genetic algorithm
Annotation:

The article is devoted to solving the optimization problem of finding an energy-efficient mode operation of one of the types of energy-intensive industries with the properties nonlinearity, inertia, and isolation. An optimization model based on a genetic algorithm is considered as a solution method. Moreover, the calculation of the fitness function for the selection of chromosomes is proposed to be calculated on the basis of fuzzy logic

Author: N.М. Zaytseva
Year of release: 2019
Number of the journal: 4(76)

Development of web-site interface on WordPress platform
Annotation:

The article discusses the advantage of WordPress CMS platform for web site development. The development of the interface of the website of the online store and the software code related to the functional part of the site is described. It also shows the activation, installation and configuration of the plugin. The article analyzes the latest technologies for creating an online store based on the site and mobile application.

Year of release: 2019
Number of the journal: 4(76)

Some features of the technology of teaching students for the discipline “Economics and entrepreneurship in industry” in English
Annotation:

Various methods and approaches in teaching foreign languages are gaining popularity in the modern world of globalization and integration. The integration of the education system caused by the acceleration of the process of mastering foreign languages and increasing its quality, in this regard, this article discusses the latest world teaching methods in order to implement them in the educational system of educational institutions. In particular, in the modern educational environment, the approach based on the idea of integrating subject and language learning in the process of professional training of future specialists (Content and Language Integrated Learning) is of particular importance, which contributes to the formation of professionally-oriented competence in a foreign language. In this regard, the article presents the methodology for activating the knowledge and skills of students in lectures, practical training and during independent work of students on the example of the discipline “Economics and entrepreneurship in industry” for students of non-linguistic directions of training in accordance with the methodology of content and language integrated learning (CLIL). The methods of applying the “Language input theory”, “Second language acquisition” theory, “Interaction theory” in lectures, practical training and during independent work of students in the discipline “Economics and entrepreneurship in industry” are also proposed. A practical algorithm of the course of the lesson (on the example of lectures) in accordance with the CLIL methodology according to the specifics of the discipline is presented. The methodology of evaluating students’ knowledge in accordance with the credit technology of training is presented. In the article, special attention is paid to the auxiliary role of the teacher in helping students master the materials of the discipline, which is reduced as the student acquires basic professional knowledge and skills. This emphasizes the auxiliary role of the teacher at the first stages of training (acquaintance, introduction, training, including independent analysis and evaluation of data while learning a foreign language), followed by independent training of students

Year of release: 2020
Number of the journal: 2(78)

Human trafficking with the purpose of labour exploitation and illegal labour migration in the Eurasian Economic Union countries: problem statement
Annotation:

Annotation. The research topic is directly connected with the solution of the nationwide issues of the social and labor policy of the Republic of Kazakhstan, based on the globalization and regional processes in the world, the experience of its implementation in the regions and, first of all, in the Eurasian Economic Union member-states. Another important factor is the comparative consideration of social policy and labor potential of Kazakhstan, Russia, Belarus, Armenia, Kyrgyzstan taking into account national and common interests. At the present stage, the issues of illegal labor migration and human trafficking in our country are given special attention. The main aim of the research is developing recommendations and proposals, aimed at further progress of the legal framework for cooperation in the social and labor sphere and the social protection of labor rights as a promising area of legal science and as an important line of social and integration policy. The research also aims at the research and examination of human trafficking and labor migration as a social phenomenon in the EAEU countries, the study of methods and techniques of combating it, and the development of recommendations for improving legislation and strategies to counteract this social phenomenon.

Year of release: 2020
Number of the journal: 2(78)
Heading: Law

Simulation of property management using the example of filling station chain
Annotation:

When managing a filling station chain, it is necessary to solve the following tasks in dynamics: determining the volume of purchases by types of oil products sold and redistributing the available volume of various types of oil products to filling station chain. The peculiarity of this control task is that the replenishment of the storage of oil products is carried out centrally, and the sale of each type of fuel is carried out at separate filling stations of the network, that is, in many points. At the same time, the volume of each type of fuel sold by each station of the network should be taken into account separately, taking into account the seasonal demand for a specific oil product. In addition to modeling demand, information is needed on the volume of petroleum products that can be purchased from suppliers with the possibility of increasing or decreasing the volume of purchases due to demand. To solve this problem, a list of suppliers of a specific type of oil product with a possible range of supply volumes must be determined. In the proposed model, an attempt is made to solve the above problems. To solve them, a management model was developed, which was implemented using the Visual Studio C # programming environment and MS SQLServer DBMS. When developing the structure of the database tables, the task of managing a network of filling stations based on the Petri net was taken into account: that is, the database tables provided for storing information on the volumes of supplies of petroleum products, the volume of sales of each type of petroleum product, as well as the time of deliveries and sales. To solve the problem of centralized procurement for all types of fuel, the database provided tables with information about suppliers and possible volumes of supplies by them of various types of petroleum products. To solve the problems of forecasting demand, the model includes algorithms for predicting the volume of sales of petroleum products based on the accumulated time series of data for each type of fuel separately. The forecasting was carried out in order to assess the required volumes of purchases of oil products for the coming period. The prediction algorithms are implemented using two methods: linear approximation and exponential smoothing. Both algorithms take into account the seasonality of demand.

Year of release: 2020
Number of the journal: 3(79)

Unit economics in the youth entrepreneurship sector: principles, methods of implementation
Annotation:

Basic problem: the Republic of Kazakhstan is a platform for implementing innovative projects in all spheres of the economy, providing the younger generation with resource centers, technological parks, agricultural equipment, industrial technologies and scientific and educational complexes. The main goal of such actions is to activate scientific research, increase the technological potential of the industrial sectors of the national economy, and stimulate the development of innovative activities in the field of research and development. The problems of developing an entrepreneurial culture are a cornerstone issue that combines a combination of motivational principles for generating and promoting ideas, activating youth entrepreneurship as the flagship of the future economy, and a complex epidemiological situation in the world that hinders not only the development of entrepreneurship, but also the course of all socio-economic processes in society. Purpose: The purpose of this study is to identify the problems of youth entrepreneurship and find ways to solve them in accordance with the principles and methods of implementation, including the unit economics. Methods: the research Area focuses on economic modeling techniques that are successfully used in international practice to determine the profitability of business models, taking into account the effect of the production of a unit of goods / services or a single client / customer. The implementation of this approach is facilitated by the use of traditional methods of scientific research, such as analysis, comparison, and a graphical method for visualizing the results obtained; quantification method and parametric method as an evaluation tool that allows formalizing the procedure for evaluating the performance of unit economics models. Results and their significance: when considering business models in relation to youth entrepreneurship, attention is paid to the skills and competencies that students who study the disciplines of the entrepreneurial block in higher education receive. The proposed methods of unit economics are actively used in the development and promotion of startups, as an integral part of business plans. It is concluded that youth business has started to play a crucial role in solving socio-economic problems, such as creating new jobs and reducing the unemployment rate, and training qualified personnel. The set of proposed measures provides additional opportunities and increases the influence of youth entrepreneurship, which becomes the basis for unlocking its potential.

Year of release:
Number of the journal:

Development of entrepreneurial activity in Pavlodar region: analysis of the state and problems
Annotation:

Main problem: Small and medium-sized businesses, as an important component of modern production, largely contributes to maintaining a competitive tone in the economy, creates a natural social support for a social structure organized on the principles of the market, and also forms a new social stratum of entrepreneurs. Since the establishment of independent Kazakhstan, the sphere of entrepreneurship has always been in the center of attention of the state, and the Strategy "Kazakhstan - 2050": the new political course of the established state, comprehensive support of entrepreneurship as the leading force of the national economy has been identified among its priority tasks. At the present stage of development, the system of state support for small and medium- sized businesses in the Republic of Kazakhstan includes a number of institutions and state programs designed to provide comprehensive support to this sector of the economy. Despite the measures taken by the state to support small and medium-sized enterprises (SMEs), the development of this area in the regions and the Republic of Kazakhstan, in general, faces a number of serious problems, including those of a systemic nature, which involves researching the state, identifying problems and determining prospects for the development of small and medium- sized businesses. Purpose: to study the state, trends and prospects of development of SMEs in Pavlodar region, to identify and describe the problems of organizing the activities of entrepreneurs in the region. Methods: the state of entrepreneurial activity in the region is analyzed in the context of the main socially significant indicators of its development, the main trends and patterns of development of the SME sphere are identified and the reasons that form them are substantiated. As one of the tools for identifying and substantiating the reasons hindering the development of entrepreneurial activity, the study conducted a survey of entrepreneurs to identify the problems of SMEs in the region. Results and their significance: Based on the results of the study, a range of priority problems of SMEs in the region was determined, an assessment of their correlation with similar problems of the SME sector of the Republic of Kazakhstan was given, and a range of basic expectations of entrepreneurs in the context of government measures to support their development was outlined.

Year of release:
Number of the journal:

Organization of the educational process on anti-doping support in a sports university
Annotation:

Main problem: the organization of anti-doping education of students assumes the presence of a specialized discipline "Fundamentals of anti-doping support" and the inclusion of anti-doping topics in classical disciplines. The formation of a number of competencies in the field of anti-doping education requires new interactive forms of organization of activities that take place in the development of both disciplines of the medical and biological cycle, as well as sports, pedagogical and social disciplines. A conscious perception of the industry problems associated with the use of doping in sports and the health of the nation provides knowledge of chemistry, biochemistry, physiology, sports medicine. Purpose: study of the organization of the educational process for anti-doping support in a sports university. Methods: today, the main methodological innovations are associated with the use of interactive learning technologies. The learning process, based on the use of interactive teaching methods, is organized taking into account the inclusion of all participants in the learning process. An educational communication environment is created, which is characterized by openness, interaction of participants, equality of their arguments, accumulation of joint knowledge, and the possibility of mutual evaluation. The organization of the educational process on anti-doping support for InEU students assumes the presence in the educational program of a specialized discipline "Fundamentals of anti-doping Support" and the introduction of components of anti-doping education in already established disciplines. Results and their significance: the organization of the educational process on anti-doping support for InEU students assumes the presence of a specialized discipline "Fundamentals of anti-doping Support" in Educaional Program and the inclusion of components of anti-doping education in the formed disciplines.

Year of release:
Number of the journal:

Methods for reducing nitrogen oxide emissions in steam generators of thermal power plants
Annotation:

One of the agent modern tasks is to ensure the cleanliness of the air basin. To ensure this, it is necessary to clean the combustion products of the fuel removed from the boilers after their cooling into the atmosphere from harmful substances, including nitrogen oxide.

Author: А.P. Plevako
Year of release:
Number of the journal:

Constitutional Council of the Republic of Kazakhstan and other state authorities: problematic aspects of interaction
Annotation:

In the Republic of Kazakhstan a market economy, a democratic political system and a free civil society based on ideological, social and political pluralism are developing. This contributes to the development of constitutional norms and the diversity of new legal institutions that ensure the supremacy of the Constitution. These include the constitutional Council. In 2020, it's been twenty-five years from the date of adoption of the Constitution of the Republic of Kazakhstan and the creation of the constitutional Council of the Republic of Kazakhstan, ensuring the supremacy of the Constitution throughout the territory of the Republic. The constitutional Council of the Republic of Kazakhstan is not part of any of the three branches of government and is subject only to the Constitution of the Republic of Kazakhstan and the law. The purpose of this article is a comprehensive analysis of theoretical and practical issues of interaction between the constitutional Council of the Republic of Kazakhstan and other institutions of state power. In this regard, the article contains the results of the analysis of the foundations of the constitutional system of the Republic; constitutional supervision of the prosecutor's office; the institution, functions and instruments of power of the President, mechanisms of interaction of the Constitutional Council as a constitutional supervisory body with the President of the Republic of Kazakhstan, the Parliament of the Republic of Kazakhstan and the Government of the Republic of Kazakhstan. A comprehensive study of the activities of the constitutional Council of the Republic of Kazakhstan on the constitutionalization of current legislation is one of the current theoretical and practical problems. It is determined by the scale and quality of the current legislation adopted during the period of fundamental social reforms, the need to «correct» and improve it. In this regard, a significant role is assigned to the Constitutional Council, whose activities are subject to scientific analysis and reflection. In addition, the authors studied and revealed the line of interaction of the constitutional Council and other government institutions are considered in the areas of initiation of constitutional proceedings in the Council, organisational, legal, information procedures, determine the composition of the constitutional Council, overcoming the objections of the President to the constitutional Council's decision. The institutional method used in the article made it possible to show the essence and significance of the constitutional Council in the system of state authorities

Year of release: 2020
Number of the journal: 2(78)
Heading: Law

Revisiting Correlations between Real and Imaginary in Space of Surrealism
Annotation:

Main problem: this article deals with the research of surrealism which is not just one of ordinal modernism directions or one of many isms in the art of the 20th century, but which appears as a universal phenomenon in the culture of the epoch, reflecting its main features; surrealism has risen many issues substantive for culture modernity, and resolutions of which are worthy in-depth study. Purpose: to determine the meaning of the unconscious when building a surrealistic world picture and show the relationship and interinfluence of the arts and reality, real and imaginary within the frames defined by surrealism. Methods: the study is based on philosophical and art review of literary and art works performed by surrealists. In various manifestos and works made by surrealism figures it is traced the intention to penetrate into the depth of human psycho using dreams and different mental illnesses. It is known about the enormous impact that the discoveries made in the field of psychoanalysis had on the development of Surrealist philosophy. So, the method of free associations was popular, which was actively used by the Austrian scientist Z. Freud in his medical practice, talking with the patient and analyzing his dreams, the doctor with the help of key symbols revealed the cause of the neurosis, and the surrealists were attracted by the research of the Swiss psychiatrist C. Jung, devoted to the analysis of archetypes and symbols in the lives of various peoples. Results and their importance: practical significance of the study is related to the following circumstances: the necessity to make sense for the reasons of the crisis which encompasses the culture today, the search of possibilities and ways to recover it; u this work’s materials can be also used in research of creations of young Kazakhstan avant-garde artists. The research materials can also be used in the practice of teaching philosophy, cultural science, psychology, and other humanitarian disciplines and also in work of fine art experts and museum staff; based on the materials of this research, the special courses on culture philosophy, culturology, esthetics and theory of arts can be developed.

Year of release:
Number of the journal:
Heading: Humanities

Features of teaching physics in English in secondary school
Annotation:

This article reveals the essence of teaching the disciplines of the natural science cycle in English in high school. When preparing for the lesson, there is a need for careful selection of educational material, the teacher thinks out a specific algorithm for working with the text in a foreign language using subject terminology, while not forgetting the basic grammatical and syntactic models characteristic of the English language. In such a language environment, foreign speakers actively acquire solid knowledge, eliminating language difficulties in professionally-oriented lessons. Given this problem, we decided to create a methodological guide for teachers, which will contain tasks for formative assessment in physics lessons in English. Its lexical and grammatical material meets the requirements for mastering the English language (B1) in educational and cognitive activities. The presented progress tests also meet all the requirements of the corresponding stage of training of non-native speakers and help to consolidate the skills of professionally oriented communication. The purpose is to reveal some principles that should be taken into account when preparing assignments for physics lessons in English, as well as to provide a methodological guide for teachers. This article shows several principles that are most effective when conducting lessons. All the data of the article was confirmed by a computer survey of students, the answers were analyzed and collected for publication. Given the results we have presented, secondary school teachers can improve the quality of the material provided, as well as spend less time preparing for lessons. Physics is one of the fundamental sciences that can combine both the subject content and the language component. Here we present various methods of subject-language integration to improve communication skills. Thus, the preparation and conduct of physics lessons in English requires a strict and careful selection of educational material and takes into account the educational profile of secondary school students.

Year of release:
Number of the journal:

Improving the technology of fruit and vegetable semi-finished products with natural aromatic and spicy additives
Annotation:

The sharp deterioration of the environmental situation in the Republic of Kazakhstan, associated with human activity and the impact of harmful factors on the environment, affected the quality of food consumed by insufficient consumption of domestic fruit and vegetable products containing vitamins, minerals of an alkaline nature, carbohydrates, vegetable proteins, pectin substances and active fiber. The problem of improving the quality of growing and processing fruits and vegetables is one of the main tasks of the food independence of the Republic of Kazakhstan. Currently, the share of large vegetable farms in the Republic of Kazakhstan is only 10%. The volume of industrial processing of fruit and vegetable crops in Kazakhstan is insignificant. The demand for domestic fruit and vegetable products in the country is met only by 35-40%, most of it is imported from countries such as Russia, Kyrgyzstan, Uzbekistan and China. There is a need for the development of organic vegetable growing in Kazakhstan and the creation of new types of domestic fruit and vegetable products containing a sufficient amount of useful and active substances that can bind and remove toxic substances and radioactive elements from the human body. The purpose of the work is to improve the technology of fruit and vegetable semi-finished products with natural spicy and aromatic additives, to develop a multi-component recipe for vegetable mixtures and a method for producing quick-frozen vegetable mixtures with high quality indicators. These studies were aimed at studying the chemical composition and functional and technological properties of vegetables and spicy - aromatic plants for the content of biogenic compounds: carbohydrates, proteins, vitamins, essential oils, minerals and other substances. The structure of plant tissues was studied and the mass fraction of moisture, dry matter, fiber, mono - and disaccharides, pectin substances, vitamin C was determined, the formulation and production technology of Assorted vegetable mixtures were developed, and quality indicators were determined.

Year of release:
Number of the journal:

Development and research of means and methods for improving the efficiency of heat stations in the Republic of Kazakhstan
Annotation:

The main problem: This article is devoted to the key problems of the fuel and energy complex of the Republic of Kazakhstan: 1) lack of production capacity to meet the growing demand for energy and fuel from the economy and the population. Increased demand for electricity and heat, which will require the commissioning of new generating capacities.There is already a shortage in the fuel markets. Modernization and bringing the existing oil refineries (hereinafter referred to as refineries) to full capacity will not allow providing the domestic market until 2030; 2) the export orientation of raw materials, the dependence of the economy on the export of energy resources. In order to attract technology and investment in the oil and gas and nuclear industries, agreements on the extraction of energy resources were concluded with international export companies. In the medium term, Kazakhstan may face a shortage of oil for domestic refineries, if measures are not taken to stimulate its refining within the country. The uranium mined is fully exported; 3) high energy intensity of the economy, low level of energy efficiency. There is a high potential for increasing the efficiency of energy use both in the electric power industry and fuel production, and at the level of final consumption – in industry and housing and communal services; 4) decrease in the replenishment and quality of the resource base in the oil and gas, coal and nuclear industries; 5) low environmental friendliness of technologies used in the fuel and energy complex. Purpose: The purpose of the article is to reveal the problem in the field of ensuring the fulfillment of international obligations between different countries and their own energy sufficiency by gradually changing the structure of energy production. Methods: Studying the experience of increasing the efficiency of the use of energy resources and energy saving as a priority of the state policy of the country. Analysis of production capacity with a constantly forecasted shortage of primary energy resources and insufficient growth of capacity for the production of electricity and heat. Consideration of the possibility of compensating for the shortage by saving energy resources, increasing tariffs for energy carriers, as a stimulating factor for their effective use. Results and their significance: The results of this article will reflect the problems of energy, as the most important driving force of global economic progress. The well-being of the people depends on the state of the country's energy sector, therefore there is an urgent need to solve the emerging problems. The global energy problem is, first of all, the issue of stable and efficient supply of fuel and energy to mankind. Today, the energy sector of Kazakhstan is focused on fuel resources, since the country is provided with hydrocarbons and other energy resources. About 72 % of electricity in Kazakhstan is generated from coal, 12,3 % from hydro resources, 10,6 % from gas and 4,9 % from oil. Thus, the four main types of power plants generate 99,8 % of electricity, while alternative sources account for less than 0,2 %.

Year of release:
Number of the journal:

Ingularly perturbed equations in critical cases
Annotation:

Singularly perturbed partial differential equations with small parameters with higher derivatives deserve special attention, which often arise in a variety of applied problems and are used in describing mathematical models of diffusion processes, absorption taking into account small diffusion, filtration of liquids in porous media, chemical kinetics, chromatography, heat and mass transfer, hydrodynamics and many other fields. It is necessary to consider the creation of an asymptotic classification of solutions of singularly perturbed equations using a well-known approach to solving the boundary value problem. In this case, the singular problem is understood as the problem of constructing the asymptotics of the solution of the Cauchy problem for a system of ordinary differential equations with a small parameter with a large derivative. The asymptotics of the solution in all cases is based on the last time interval or the construction of a boundary value problem for a system with a weak clot in an asymptotically large time interval. Purpose - to construct and substantiate the asymptotics of solving a singular initial problem for a system of two nonlinear ordinary differential equations with a small parameter; To date, a number of methods have been developed for constructing asymptotic expansions of solutions to various problems. This is the method of boundary functions developed in the works of A.B. Vasilyeva, M.I. Vishik, L.A. Lusternik, V.F. Butuzov; the regularization method of S. A. Lomov, methods of averaging, VKB, splicing of asymptotic decompositions of A.M. Ilyin and others. All the above methods allow us to obtain asymptotic expansions of solutions for wide classes of equations. At the same time, such singularly perturbed problems often arise, to which ready-made methods are not applicable or do not allow to obtain an effective result. Therefore, the development of methods for solving equations remains a very urgent problem. As a result of the study, an algorithm for constructing an asymptotic classification of the initial solution of the problem with a singular perturbation is given, and approaches to estimating the residual term are also shown.

Year of release: 2021
Number of the journal: 4(84)

Development of a technology for producing organic fertilizers based on catalytic processes
Annotation:

The article is devoted to the development of a technology for obtaining organic fertilizers from poultry waste based on biocatalytic processes. Currently, many poultry farms have become sources of environmental pollution, thereby causing serious environmental problems and economic and social damage. The problem of reliable protection of the natural environment from pollution by bird droppings is currently relevant. In the area of operation of large poultry farms, air pollution by microorganisms, dust, foul-smelling organic compounds, which are decomposition products of organic waste, as well as nitrogen, sulfur, and carbon oxides, is possible. Bird droppings contain acids, nitrogen, phosphorus and potassium, heavy metals. The content of nitrogen, phosphorus and potassium changes dramatically depending on the quantity and quality of the feed. Humic substances isolated from brown coal have a sufficiently high sorption activity and are used as cheap sorbents for solving a number of environmental problems in industry. These studies are aimed at minimizing the main disadvantage of the anaerobic digestion process, the low reaction rate, which leads to the need to create large-volume bioreactors. On the basis of the research carried out, a technology has been developed for obtaining organic fertilizers from poultry waste by the method of anaerobic fermentation of chicken manure with humidity at a temperature of 27 °C - 50 °C with the addition of sodium humate. The resulting fertilizer is intended for use in agricultural production, horticulture, floriculture, forestry, municipalities, in household plots in order to increase the yield and quality of crop production. For the developed technology, an application has been submitted for obtaining a Patent for the invention of the Republic of Kazakhstan «Method for producing organic fertilizers» (priority No. 2021-22818, dated July 13, 2021). The invention allows to significantly reduce the time of fermentation, to enrich the product with organic and mineral products contained in sodium humate, to convert the salts of heavy metals into an insoluble state, to improve the environmental friendliness of the method.

Year of release: 2021
Number of the journal: 4(84)

Management in healthcare: domestic and foreign experience
Annotation:

The specifics of the management of healthcare institutions are due to the fact that healthcare is a special field of activity that differs significantly from other types of activities. One of the most important management tasks in the field of public health protection is the achievement of targets: improving the quality and accessibility of medical care through the effective use of limited financial, material, labor and other health resources in conditions of rapidly growing competition in the medical services market. The purpose - is to review and summarize the domestic and foreign experience of management in health care. The article emphasizes that the serious institutional transformations taking place in the domestic healthcare system in recent years are aimed at improving the quality of medical services in the implementation of the state guarantees program, at switching to a single-channel model of financing medical care, at introducing the principles of result-oriented budgeting into the activities of socially oriented organizations providing socially significant services. The practical implementation of the above innovations requires a revision of the concept of management in the field of healthcare, the priority areas of which correspond to the best world practice. The preservation of the health of the nation is a strategic guideline of state regulation in the field of healthcare, which determines the targets of state policy. When writing the article, traditional methods (comparison, description, measurement), general logical methods and research techniques (analysis, generalization, etc.) were used. The article discusses the main theoretical foundations and organizational and economic mechanisms of the healthcare management system in market conditions. The author notes that effective healthcare is a significant factor stabilizing the socio-political situation at all the above-mentioned early stages of the reform. Therefore, studies of economic relations in healthcare in the transition period, the role of innovation policy in the management of healthcare institutions are becoming relevant. At the same time, issues of the effectiveness of the functioning of healthcare institutions are of particular importance, which are ultimately determined by the creation of socio-economic, scientific, technical, organizational and economic prerequisites for the progressive development of productive forces using the achievements of scientific and technological progress, the latest medical technologies.

Author: Zh.N. Abdikadyr
Year of release: 2022
Number of the journal: 1(85)

The possibility of using correlation and regression analysis in ecological and economic research at oil refineries
Annotation:

It is known that an increase in the volume of production in any sphere of production as a consequence increases the intensity of anthropogenic impact on the environment, including the atmosphere. This problem is especially typical for oil refineries. On the one hand, this is due to the complexity of oil refining processes and the release of various hydrocarbon compounds into the atmosphere during processing. Therefore, when implementing sustainable ecological and economic development in the Azerbaijani regions that are associated with oil refining, an increase in the volume of products should not create an increase in environmental impact. This problem is considered one of the factors directly affecting the economic situation of the enterprise, as well as creating certain environmental, social and economic problems for society as a whole. The purpose is to study the possibility of using the correlation-regression method in solving the problem of determining the presence of the decapling effect. The relationship between the volume of petroleum products produced and the amount of pollutants released into the atmosphere is random and is characterized by stochastic and statistical dependence. At the same time, on the basis of a mutual comparison of the methods of correlation and regression analysis and the method of production function, the effectiveness of correlation and regression analysis is determined. The methodological basis of the work was the scientific works of scientists-economists, mathematicians providing the definition of the decoupling effect at industrial enterprises. In the presented methodology, the obtained estimates of the performed in real time vary depending on the values of the set parameter. When developing the presented methodology, the STATISTIKA software package was used. This program was developed by StatSoft. Based on the obtained and experimentally verified data, the equation of linear regression dependence is determined. During the research, it was found that in some cases it is not possible to evaluate the statistical characteristics of a random variable or it is accompanied by serious errors. Therefore, when processing data, instead of mathematical expectations and variances, we used selective mathematical expectations and variances. The analysis of the ecological and economic situation of oil refineries based on correlation and regression analysis allows us to determine the presence of the decapling effect. The obtained correlation coefficient between the volume of production oil products and the volume of emissions into the atmosphere shows that there is no statistically significant relationship between these parameters. Thus, there is an achievement of the decoupling effect between the production of petroleum products and the volume of emissions of pollutants into the atmosphere.

Author: Kh.B. Guliyeva
Year of release: 2022
Number of the journal: 2(86)

The use of a heat pump at an industrial enterprise in the region
Annotation:

Main problem: The use of waste heat is most often solved by installing heat exchangers, but this is not effective when the temperature of this heat does not exceed 10-15 0 C, in which case this heat can be used using a heat pump. Where can I get this heat? Almost any enterprise needs cooling of any equipment elements or substances – working fluids; the heat received from them can be sent to a heat pump and used here at the enterprise. Purpose: Consideration of the possibility of using the heat of cooling water from the pump CNS 60-165 and the proposal of a new scheme with the installation of a heat pump that uses this heat. Methods: This is achieved due to the fact that it is proposed not to discard the heat, but after its use in the heat pump evaporator, transfer it to the heated medium - water, which is then sent to the shower cabins of the enterprise. Since the showers are located in the same room, the cost of transporting heat and losses will be minimal. Methods: In the course of the research, the possibility of using the waste heat of an industrial enterprise for using it here at the enterprise for the purposes of hot water supply was considered. For these purposes, it is proposed to install a heat pump, thanks to which the thermal potential increases, which makes it possible to fully use the received heat. Results and their significance: As the experience of foreign countries has shown, heat pumps can be widely used in many industrial enterprises, and in conditions of increased competitiveness, in order to reduce energy costs and the cost of manufactured products, install heat pumps to utilize excess heat, for example, process water, which is available in many production allows you to have a significant economic effect.

Year of release: 2022
Number of the journal: 2(86)

Methodological foundations of the application of the project method in teaching object-oriented programming.
Annotation:

The article presents a method of teaching object-oriented programming to students of the educational program «Computer Engineering and software» using the project method. The problem of the insufficient level of organization of the educational process in colleges, aimed at studying any kind of object programming, is investigated. In this regard, the important aspects that must be taken into account when constructing a methodology for teaching object-oriented programming, aimed at enhancing the cognitive independence of students, are described in detail. It is shown that the solution to this problem largely depends on the degree of achievement of the learning goals of students specified in GOSTiPO, as well as on the methodological guide to object-oriented programming, developed in accordance with the requirements of modern education. An analysis was made of the State Compulsory Standard for Technical and Vocational Education of the Republic of Kazakhstan, the Model Curriculum and the Working Curriculum in the discipline "Fundamentals of Object-Oriented Programming" for students of the educational program "Computer Engineering and Software" and the teaching methodology developed on their basis. The purpose is to substantiate the methodology for teaching students object-oriented programming, which activates cognitive activity through the use of the project method and its practical application in the educational process. Methods: The methods of analysis, synthesis and deduction were used in the article. Results and their significance: The practical result of the analysis was the method of teaching college students object-oriented programming, using the project method, which is necessary for a more intensive development of cognitive independence. The practical significance of the results is to increase the efficiency of studying the discipline by taking into account the individual characteristics of students.

Author: E.V. Prokopets
Year of release:
Number of the journal:

The prevalence and effectiveness of the treatment of edemagenosis in sika deer in the Ussuri urban district
Annotation:

The degree of dаmаge to deer by the lаrvаe of Oedemаgenа tаrаndi of the Hypodermаtidаe fаmily depends on the number of femаles of the subcutаneous gаdfly in the summer. For the development of meаsures to combаt deer gаdflies, vаrious methods hаve been tested over the yeаrs, аmong them methods of wаtering аnd externаl locаl аpplicаtion. For this purpose, mаny reseаrchers tested dipterex (80 %), crystаlline chlorophos (97 %) in the form of аn 8 % solution, tiguvon, ricifon, dioxаfos, sulfidophos-20 аnd ectopor (2 % cypermethrin) аnd other drugs. Vаrbeks 35 %, Bаytex-50, Fenthion-50, Nаtаsol аnd Etаcid, etc. were tested intrаmusculаrly in vаrious doses on deer. The purpose is to study the prevаlence аnd effectiveness of the treаtment of edemаgenosis in sikа deer in the Ussuriysk urbаn district. The reseаrch wаs cаrried out аt the deer fаrm "Borisovskаyа". For the experiment, three groups of deer were formed with 6 heаds eаch. In order to study the therаpeutic аnd prophylаctic efficаcy of the two groups of drugs Аversect-2 аnd Dectomаx, the аnimаls of the first experimentаl group were injected with the drug Аversect-2 subcutаneously аt the rаte of 1 ml per 50 kg of аnimаl weight, deer of the second experimentаl group were injected subcutаneously with Dectomаx аt а dose of 0.2 mg per 1 kg of mаss, which corresponds to 1 ml of solution per 50 kg of mаss. The prepаrаtions were аdministered immediаtely аfter the end of the summer of gаdflies (end of July-beginning of Аugust). The third group of deer did not receive drugs, аnd it remаined the control group. The incidence of sikа deer entomosis in the Ussuriysk urbаn district for three yeаrs wаs quite high аnd remаined аt the sаme level for аlmost the entire period (43.21-48.8), with а slight decreаse in 2021 to 37.4 %, which wаs most likely due to the climаtic conditions of this period. Of the two selected drugs with seemingly the sаme spectrum of аction, the best results were obtаined on the deer of the second experimentаl group, where the drug "Dektomаx" wаs used, while the EI wаs significаntly (two times) lower thаn in the first experimentаl group аnd аmounted to 16.7 % versus 33. 3 %, аnd АI - 0.03, аgаinst 0.83.

Year of release: 2022
Number of the journal: 4(88)

The essence of innovation and the innovation process in retrospect and in modern conditions: international aspect
Annotation:

Main problem: in conditions of increasing competition, when characterizing commercial structures, a fundamental role is given to innovations, which occupy important place in economic life of the organization. Accordingly, the study of their essence and content is of particular importance for growth of competitiveness of organizations, which determines the relevance of study. Purpose: to investigate essence of innovation and innovation process in retrospect and in modern conditions as main prerequisite for improving competitiveness of commercial organizations. Achieving this purpose required solving following research tasks: to reveal the content of theoretical approaches to the study of the main aspects of interaction between business and government in modern science; the differences between the concepts of “novelty”, “know-how”, “innovation” are investigated; the relationship of the triad of concepts “novelty”, “know-how”, “innovation” is determined; concept of “innovation” has been studied in retrospect; concept of “innovation” in market economy is studied (foreign experience); approaches to definition of concept of "innovation" in international innovation theory and practice are defined; content of innovation process is presented, as well as author’s alternative scheme of innovation process; authorэs view on interpretation of concepts of “innovation”, “innovation process” in modern conditions is presented. Methods: theoretical and methodological basis was concepts, hypotheses and theories presented in works of domestic and foreign researchers. The methodology is based on systematic approach, within which methods of comparative, factorial, subject-object, structural-functional, statistical analysis and extrapolation have been applied. Results and their significance: article examines concepts of “innovation”, “innovation process” in retrospect and in modern aspect. Approaches to concept of "innovation" are systematized, an alternative scheme of innovation process is proposed. It is proved that in modern conditions innovation should be considered as process system reflecting all aspects of innovation process, main purpose of which is to achieve efficiency

Author: I.P. Stecenko
Year of release:
Number of the journal:

Automated sprayer for processing agricultural crops
Annotation:

In order to successfully conduct agricultural work and obtain a competitive harvest, it is mandatory to carry out spraying operations of crops that require highly qualified personnel, expensive equipment and suitable weather conditions. The use of tractors for spraying fields is the most common solution available at the moment, has disadvantages: high cost, risk of damage to the crop by "hitting", "hooking" or otherwise; environmental damage; due to exhaust gases, the demolition of the solution increases with increasing speed. Using a device designed specifically for spraying equipment is an ideal solution. The purpose of the article is to develop a working model of an automated sprayer for processing agricultural crops. The methods used are: technical justification of a controlled device for processing agricultural crops. Calculation of functional capabilities, algorithms of operation of the proposed automated device: selection of the type of sprayer, engine, chassis, controller, battery, as well as justification of the possibilities of using alternative energy sources (wind energy, solar energy); development of a 3D model of an automation device for anti-weed processing of agricultural crops, printing of parts, assembly of mechanical and electronic parts. Making a prototype using 3D printing; development of the wiring diagram of electronics, software (firmware of the microcontroller; application that controls the settings), testing of the prototype, assembly of the current model; rationale for the optimal use of Arduino and Raspberry Pi boards in this device in a pair: Raspberry Pi will allow you to control processes on the Arduino and easily interact with the Internet when the Arduino itself will perform simple operations such as interacting with electronics and reading sensor readings. The manufactured operating model showed compliance with the goals, a high degree of controllability, environmental friendliness, reduction of energy consumed, labor resources and can be used to scale this device. The developed model of the automation device for anti-weed treatment of agricultural crops can be used not only in agricultural pollination, but also as a mechanism for studying soil parameters: humidity, mineralogical composition and chemical content in the ground, using electronic sensors, as well as an automated mobile platform for any purpose requiring accurate navigation through the territory.

Year of release:
Number of the journal:

Mathematical modeling of experimental data in the design of formulas for dairy products
Annotation:

Main problem: the article is devoted to the issue of designing basic recipes for dairy products using mathematical modeling methods. The author analyzed the problems in the field of food technology and concluded that mathematical modeling is used in the following areas: clarification of technological process modes, designing recipes and assessing the quality of finished products, as well as predicting the shelf life of new products when they are put into production. The use of dihydroquercetin as a drug that prevents the oxidation of milk fat in the design of dairy products is substantiated. Mathematical modeling was carried out on the basis of experimental and analytical material obtained in laboratory and production conditions. Based on the maximum value of the objective functions, the optimal normalized mixtures and the maximum allowable concentration of dihydroquercetin were selected. The analysis of the received mathematical dependences and models is carried out, the system of linear equations is made. Purpose: to study the effect of natural bioflavonoid antioxidant on the oxidative processes of milk fat and the viability of lactic acid cultures and their associations by mathematical modeling in order to use it in the technology of a new product; conduct an analysis of mathematical dependencies and models, compose a system of linear equations. Methods: the article uses the method of mathematical analysis and the matrix method. Results and their significance: a mathematical model was developed for the dependence of the viability of probiotic cultures on the mass fraction of dihydroquercetin when designing recipes for a creamy-protein curd product, a matrix of the chemical composition of dairy ingredients was presented, and a system of linear equations for basic recipes was compiled. In the course of the study, the spatial configurations of dihydroquercetin, as well as its effect on the oxidative processes of milk fat, were studied. Mathematical modeling of experimental data on the study of the effect of dihydroquercetin on the viability of microorganisms with probiotic properties was carried out. The normalization of the complex of obtained results on the study of the influence of the mass fraction of dihydroquercetin on the fermentation process was studied. Controlled factors characterizing the process of fermentation of model media with dihydroquercetin have been determined. A rationing of the dihydroquercetin complex of more than 0.50% was established; the target function decreases to its minimum value of 0.53 with a mass fraction of dihydroquercetin of 1.00%.

Year of release:
Number of the journal:

Basic Moral and Conceptual Guidelines for Educational and Pedagogical Activities
Annotation:

Main problem: humane pedagogical thinking seeks to embrace the immensity, and this is the strength of educational systems and processes born in its bowels. To actualize the value of self-disclosure of students’ innovative abilities with the accompanying, providing role of a teacher, it is necessary to recognize a one’s intellectual reflective mechanism as the main subject of education. Developed reflexive abilities are a logical condition for a person to independently overcome all sorts of difficulties in life and activity. Purpose: understanding and formalization of the “golden principles” of socio-natural thinking and activity of a human as a biological organism. Methods: the method of ascending from the abstract to the concrete, the method of transforming specific images of objects based on their abstract essence, the speculative language of schematic representation of a thought. Results and their significance: considering a high dynamics of technological changes in the world of activity, we accept the reflective ability for self-education as the main means to independently discover certain professional abilities necessary in life. This means that, first of all, students must learn how to learn, i.e. learn to think independently, critically perceive and transform the received information into knowledge, pose their own questions, offer a range of answers, logically formulate and coordinate different points of view, build knowledge together with others. Innovative methods and models of pedagogical activity encourage students’ innovative abilities which cause innovative and technological development of a country.

Year of release:
Number of the journal:

Features of voluntary refusal depending on the construction of the corpus delicti
Annotation:

In recent years, the Republic of Kazakhstan has maintained an ambiguous criminal situation, and there is an increase in certain types of crimes, against the background of the overall positive dynamics of decline. Special attention of criminologists has recently been attracted to the study of crimes in the family and household sphere, and crimes committed in the sphere of religious and spiritual relations, since both of these types are showing increasing prevalence. Therefore, considering such an important institution as a «voluntary refusal», it would be advisable to consider them from the perspective of the offenses we have named, especially since countering them is one of the main directions of state criminal policy. In general, the study of the institution of voluntary refusal to commit an offense is based not only on coercive measures, but also on incentive measures, which means the opportunity to correct the behavior of the offender until the end of the illegal act. The purpose of this scientific article is to study the features of voluntary refusal to commit a criminal offense in crimes committed in the sphere of religious, spiritual and family-household relations, taking into account practice and making recommendations for improving regulations of a criminal nature. The leading methodological tools of the scientific article are dialectical, phenomenological, synergetic and systematic approaches of scientific cognition. Before proceeding to the analysis of the concept of voluntary refusal, it should be noted that the norms about it are far from perfect. There is no unambiguous understanding of the signs of voluntary refusal among scientists, which complicates law enforcement practice. One of the most important tasks of any scientific research is the development of scientific concepts. The consolidation of such concepts in legislation is an effective way to establish a uniform understanding of the norms, a clear idea of their content and, as a result, an increase in the effectiveness of the impact of criminal law in the process of legal regulation. However, these concepts themselves do not reflect reality like contemplation or representation, they are closer to the essence of the phenomenon. The article concludes that the essential features of the concept itself somewhat narrow the objective reality. But, at the same time, the correct identification of the main features in the concept is an important task of scientific research.

Year of release:
Number of the journal:
Heading: Law

Creating an intelligent management environment for a powerful load node on the example of the Pavlodar region
Annotation:

The present stage of development of power systems is characterized by the need to increase their intelligence, that is, the formation of an environment capable of solving the problems of effective management of all components included in the power system. One of the features of modern energy systems is an active consumer, that is, a consumer who has the opportunity to optimize the schedule of loading their capacities, planning energy consumption, intellectualization of energy consumption. In addition to the fact that there are digital systems for collecting, processing and presenting information, as well as transmitting this information via the Internet, to solve the most difficult task of managing power systems, it is necessary to develop a large number of models adequate to real processes that can describe the processes taking place in the power system under consideration. The purpose is to develop models capable of adequately describing the interrelated processes occurring in the considered elements of the power system, as well as in the aggregate of related elements; development of methods that allow solving problems of effective control of elements of energy systems on the basis of the proposed intelligent models. To solve the problem of increasing the intelligence of the power system, nonlinear adaptive models of electrical complexes of an energy-intensive enterprise included in the power system were developed on the basis of balance equations and artificial intelligence methods. The production of alumina with the properties of inertia, nonlinearity and closure is chosen as the production under consideration. This type of production was chosen as the most difficult to predict due to the unpredictability of changes in energy consumption during the transition to other modes of its operation, associated, for example, with the receipt of raw materials with a different chemical composition for processing. Static and dynamic models of energy consumption of electrotechnical complexes with continuous inertial nonlinear closed production based on artificial intelligence methods have been developed, which makes it possible to eliminate the need to use long time series of retrospective data. For the considered type of continuous energy-intensive production, dynamic characteristics of energy consumption and technological processes are obtained from the main controlled parameters, which make it possible to predict emergency situations and partly man-made disasters. On the basis of a genetic algorithm, a multiparametric optimization problem of energy management of continuous production has been solved, taking into account technological parameters and cost factors.

Year of release:
Number of the journal:

The results of the analysis of testing sunflower interlinear hybrids in the conditions of the East Kazakhstan region
Annotation:

Increasing the yield of sunflower is inextricably linked with the evaluation of newly created interline hybrids and their components (parental forms) using various methods for assessing their combination ability (CА). Breeding research in this direction includes large material and practical costs when using the developed methods for assessing combination ability (CА) due to its small analytical capabilities. New approaches to the analysis of the productivity of hybrids in practical studies can significantly increase the volume of the analyzed material and evaluate not only for a short period of testing, but also for a long period of time over the years. Purpose is determination of the combination ability of parental forms of sunflower interlinear hybrids to optimize the breeding process. When analyzing the determination of the combination ability of the parental components of sunflower interlinear hybrids, the method of evaluating the CА according to a special scale developed at VNIIMK (Krasnodar, Russia) was used. This method makes it possible to analyze a large number of hybrid combinations and their parental forms and draw appropriate conclusions for further use in the breeding process. The analysis of the obtained results makes it possible to fully evaluate the obtained interline hybrid combinations by years of testing. We analyzed 1736 hybrid combinations involving 212 maternal forms and 1472 combinations involving 209 paternal pollen fertility restorer lines. 75 maternal lines with a high total combination ability (GCА) and 97 paternal forms with this trait were identified. Maternal lines with high combinational ability VKU 110 A, VKU 140 A and SV 55 A are of interest for use in practical breeding. Among the paternal forms are SV 123 V, VKU 400 V and VKU 401 V. The components of hybrid combinations with high specific combination ability (SCА) have been determined. These are lines VKU 414 A, VKU 413 A, SV 31 Rf, SP 1459. Hybrids with high adaptive properties have been identified when growing conditions change, which will make it possible to purposefully conduct practical breeding to maintain high productivity of sunflower hybrids

Year of release:
Number of the journal:

Expansion of Communication Contact Between the State, Business and Society in the Republic of Kazakhstan
Annotation:

Main problem: digital transformation of Kazakhstan’s society leads to emergence of new communication business models, including the so-called proactive data-based service, which implies expansion of communication contact between the state, business and society. Digital transformation of economic sectors and the service sector has objectively caused discussion of issues related to various aspects of its implementation. These include digitalization of society spheres within framework of public administration [1], problems of interaction between business and government [2], mechanisms of interaction between subjects in the private-public partnership model of government and business [3], description of communication models of business types, government and public sector [4], history of emergence of electronic trade, its forms and types of goods delivery to a consumer [5], organizational and managerial relations and processes arising in enterprises, working in field of online marketing and e-commerce [6]. In Kazakhstan, digitalization of spheres and the economy sectors is one of strategic priorities of its development. Use of information and communication technologies in the service sector creates additional impulses to its dynamics, therefore, has impact on improving population’s life quality. In this regard, it is necessary to identify trends and patterns of communication interaction between the state, business and society, to consider and clarify their content. The purpose: the research of state and trends in the development of Kazakhstan service sector under the influence of digital solutions and expansion of communicative contact between the state, business and society. Methods: the performed analysis in the research is based on the materials of the statistical reviews and their analysis using the methods of grouping, generalization, logical analysis, system description and interpretation. Results and their value: a range of the key problems of communication interaction between the state, business and society is investigated and determined. Recommendations are proposed to accelerate the development of e-commerce in Kazakhstan as a tool for communication interaction between business and society and improving population’s life quality.

Year of release:
Number of the journal:

Test as a Method of Psychology. Development History and Basic Requirements
Annotation:

Main problem: The article highlights the problem of tests as methods of psychology, the influence of validity and reliability on the results of psychological research. Purpose: Uncovering the significance of validity and reliability on psychological research results. Results and their significance: Testing is an important method in psychology, allowing measuring various aspects of the psyche and behavior of a person. The history of the development of tests in psychology goes back more than a century and began with the work of Francis Galton and Alfred Binet. Over time, the tests have become widely used in various fields such as education, personnel selection, clinical diagnosis and research. Basic requirements for tests include reliability (repeatability of results), validity (measurement accuracy), standardization (same test conditions) and objectivity (lack of subjectivity in assessment). Tests must be designed using psychometric principles to ensure accuracy and validity of results. Modern tests include a variety of measurement techniques, such as tests of personality, intelligence, aptitude, and professional skills. The use of tests in psychology requires professional training to correctly interpret the results and make valid conclusions. Testing as a method of psychology continues to evolve, and its role remains key in the study of the human psyche and behavior. Testing in psychology has a wide range of applications, including assessing personality traits, identifying psychological disorders, and predicting behavior and success in various areas of life. The development of computer-based tests and online platforms makes testing more efficient and convenient for researchers and participants. Modern tests increasingly take into account cultural differences and the diversity of individual characteristics, which contributes to more accurate and tailored assessments. It is important to remember that the use of tests requires ethics, confidentiality and compliance to ensure the reliability and validity of the data obtained.

Year of release: 2024
Number of the journal: 1(93)