The article provides the analysis of the existing heatinsulating materials and the experience of using modern heatinsulating materials for a thermal protection of power boilers.

This article discusses the benefits of cluster development, problematic aspects hindering the development of clusters in the Republic of Kazakhstan. According to statistics, in Kazakhstan so far failed to dramatically increase the innovative activity and effectiveness of the companies to create a competitive environment that encourages the use of innovation. Among the main problems should be attributed lack of qualified personnel, insufficient quality and availability of transport and engineering infrastructure, low level of institutional development of the cluster, limited access to foreign markets. Therefore, it is important to correlate the level of development of cooperation ties and incentive mechanisms, the level of technological equipment and organization of production, the level of competitiveness of suppliers, including the quality and technological level of the supplied products and services.

In the article the main issues and trends of agricultural biotechnology development in Kazakhstan, prospects of biotechnology application in the production of agro-industrial complex of the country have been considered. Data has been presented on: what researches are being carried out by scientific organizations in the field of agricultural biotechnology with attraction of leading foreign scientists and scientific organizations; what recommendations for technologies have been developed and what new biotechnological products have been created in all branches. Promising technologies in the field of biotechnologies in AIC for Kazakhstan as well as keys to the success in the development of science and technologies in AIC have been indicated.

In the article different methods of diagnosis of failures of electric equipment which are most often found in the industry today. The classification of methods for diagnosing motor failures is presented, and the advantages and disadvantages of existing methods for diagnosing failures in electric equipment are revealed. Based on the description of the methods of diagnosing electric equipment failures, a comparative table was compiled. Analyzing the comparative table of methods for diagnosing failures of electric equipment, the most current method for diagnosing the technical condition of the electric motor was determined.

With the purpose of transition of the world economy to a sustainable growth model, the principles of the "green" economy should be integrated into the currently implemented structural reforms. The four main directions that form the "green" economy are highlighted. Structural reform, which connected with directions, can serve as engines of economic growth. Particular attention in passing to the green economy is given to the formation of modern infrastructure, which has the key to ensuring sustainable development and modernization that is an important element of the structural reforms analyzed here. Worldwide, initiatives are emerging at the national level that show that countries are moving towards a "green" economy at their own pace and in the context of their national development goals and priorities. Most countries in the world have recently stepped up their environmental policies to move away from a traditional model in which environmental protection is considered a burden on the economy, to a model in which ecology is recognized as the engine of development, i.e. to the "green" economy.

The purpose of the work is the creation of an information system that allows to carry out activity on accounting and keeping statistics on the means of measurement used in production. An analysis of the use of such a system at a number of large industrial enterprises is performed. The database and the program working with a database of means of measurement on required technological positions and maintenance are developed. The program provides graphs on the accumulated statistical data.

In this article on the materials of "Gamma" LLP and with the help of Rational Rose visual modeling of processes for automation of the service center is conducted.

The article is devoted to the actual problem of tooth loss and solving the problem through the development of tissue engineering. Tissue engineering is a set of methods and procedures aimed at the regeneration of biological tissues. It includes a triad of basic elements: stem cells, extracellular matrix or scaffold, growth factors and signaling pathways. An important role in solving the existing problems is associated with stem cells. Dental stem cells are capable of self-renewal and differentiation. Based on the analysis, it was found that each type of dental stem cells has its own characteristics and applications not only in dentistry, but also in other areas of medicine.

The article provides a mathematical description of an induction motor with a device for indirect control of the electromagnetic moment and angular velocity of an induction motor in an electric drive, which allows substantiating on its basis a method for controlling the output variables of an asynchronous electric motor. A simulation model of an induction motor with an indirect control device for the output variables of an induction motor and the main results of the study are presented.

The article analyzes the state and problems of cluster development in the real sector of the region based on the materials of the Pavlodar region. The main problem of innovative development of the Pavlodar region, as well as in all regions of Kazakhstan, in general, is the lack of innovative activity of enterprises, which is reflected in the volume, frequency and efficiency of their innovations. At the same time, most of the enterprises belonging to the real sector of the economy have sufficient resources for the development of innovative activity. However, the prospects for their interaction with enterprises in other sectors and sectors of the economy for the purpose of technology transfer are insignificant, which, in general, doesn’t meet the principles of balanced spatial development of the territory formulated by the program for the development of territories of the Republic of Kazakhstan until 2020. One of the ways to solve this problem is formation and development of a cluster approach and interaction of business entities. The article assesses the efficiency of the cluster’s functioning as an institution of regional development. On the example of the metallurgical cluster of Pavlodar region, the main ways and methods of forming cluster initiatives in the regional economy are considered, a SWOT analysis of the development of the metallurgical cluster of the region is given, and its main problems are identified; identifies priority directions of clusters’ development (metallurgical cluster, including the production of final products, the cluster of railway engineering, agri-food cluster), the realization of which in the region could create the conditions for the emergence and full development of a number of new highly specialized sectors such as cluster chemistry, cluster of road and construction machinery, transport logistics cluster, cluster of modern production technologies and engineering, cluster of manufacturing components for machinery and equipment and cluster of industrial electrical engineering and equipment for power engineering. The authors also noted that the realization of regional development strategies of cluster initiatives can potentially lay the foundations for clusters “future days”, such as: cluster of resource efficiency and environmentally processing, the cluster of new energy, the cluster of innovative medicine, tourism and recreational cluster.

Environmental protection measures are based, among other things, on the rationalization of the organization of the production waste management process. Population growth and the race to industrialize pose a serious threat to the ecosystem. Currently, the average global waste generation per capita is 494 kg / year. A large number of industrial enterprises operate on the territory of Kazakhstan. The range of manufactured products is very wide: household items, transport, building materials, equipment and much more. Each type of production is inevitably a source of a large amount of industrial waste, annually at the enterprises of Kazakhstan up to 600 million tons of waste are generated, three percent of which are recycled. On the territory of Pavlodar region there are enterprises in the field of metallurgy, mechanical engineering, chemical industry, construction industry enterprises, light industry, about a hundred in total. In this connection, the problem of treatment and disposal of industrial waste in Pavlodar region is very relevant. The article discusses the system of waste management in order to reduce their impact on the environment, activities for the disposal, transportation, disposal of waste, as well as their disposal at the industrial waste landfill in Pavlodar. The landfill in question is intended for the reception, temporary storage and disposal of non-hazardous solid industrial waste of the «green» level: waste and scrap of chromium, cadmium, aluminum, copper, lead, zinc, manganese, plastic waste, polyethylene, abrasive, rubber waste, ash and ash and slag waste; and also «amber»: waste containing mercury, arsenic, lead, waste batteries, phosphoric slags, waste oils, oil sludge. The scheme of organizing waste storage works is considered. The volume of accepted and recycled waste, as well as those placed at the landfill and used for their own needs, was analyzed, including construction waste, waste sleepers, ash and slag and abrasive scrap. The solution to the problem of industrial waste disposal is associated with the need for innovation and the introduction of new technologies and equipment.

When solving project tasks, it is necessary to take into account the maximum number of possible solutions that contribute to the efficiency of the object. When analyzing the activity of multifunctional objects, such solutions are all the more important, since they allow, taking into account the specific features of the object, to make the most rational design decision, especially if these solutions are associated with the ability to solve environmental and energy-efficient problems. The decisions made can take into account both the operation of the object itself and the infrastructure that provides the solution with the necessary engineering solutions. The most difficult thing in making project decisions is to systematize the studied situations and analyze informative sources. Systematization of methods of pre-project analysis, generalization of the experience of project work on the example of designing a roadside service object. Wepropose forms that facilitate the structuring of information sources, as well as logical tables that give an idea of the specifics of the choice of positions and directions that allows quickly come to an understanding of how to implement project tasks. Awareness of the methods that allow organizing the logic and sequence of design processes in design and architectural design allows the author to identify the most important problems from his point of view and fit them into the range of design tasks. The search for answers to these problems is formed by ways of structuring information and displaying it in pictorial structures, where the word takes on the meaning of a specific symbol, in a chain of connections that determine the understanding of the integral process of functioning of the future object, taking into account all aspects of its activity.

Combustion engines operate over a wide range of power and speed. To the greatest extent, this applies to automotive and tractor engines and diesel engines operating at fractional and idle loads for a significant part of the operating time. When designing engines, the choice of their main design and layout parameters is carried out in a comprehensive manner, taking into account the provision of the required power and efficiency in the modes of maximum torque and rated power. However, ensuring the economical operation of modern highly accelerated diesel engines at low loads and idling causes a whole range of problems related mainly to the organization of effective mixture formation and fuel burnout, as well as to ensuring stable fuel supply. Thus, the cycle dose of injected fuel in idle mode is 8–12 times less than the cycle dose in nominal mode, which determines increased requirements for fuel equipment and difficulties in ensuring high-quality mixture formation. At the same time, diesel engines operate in idle mode up to 50 % of the total operating time, consuming up to 15–20% of the fuel. For truck engines, the relative idle time is approximately 20–25 %. Thus, the development of measures to improve the efficiency of diesel engines at idle is relevant. The purpose is to perform a numerical analysis of the effect of switching off cycles in diesel engines for autotractor and diesel locomotive purposes on the working processes in the cylinder and the indicator parameters of the cycle in idle modes. When writing the article, traditional methods (comparison, description, and measurement), generallogical methods and research techniques (analysis, generalization, etc.) were used. A numerical analysis of the operating cycle of a diesel engine equipped with a cycle shutdown system was performed. The relationship between changes in fuel injection characteristics when cycles are turned off with indicator indicators of the engine operating cycle in idle load modes is disclosed. It has been established that the expediency of switching off cycles in a specific engine operation mode is determined primarily by the features of the injection, carburetion and fuel burnout processes.

Main problem: The key task of the development of the regions of the Republic of Kazakhstan is to ensure their sustainable socio-economic development by increasing its competitiveness and innovation activity. To develop a successful strategy, as well as for its subsequent successful implementation, it is necessary to have a clear vision and idea of what the region will be like in the near future. This vision should be clearly formulated and understood by all interested parties in order to properly coordinate efforts in achieving the set goals. In turn, based on the vision, various initiatives and activities are being formed, the implementation of which is aimed at implementing the main directions of sustainable development of the region. Purpose: to consider the main directions of the implementation of the strategy of competitive, sustainable and safe development of the region. Methods: The theoretical and methodological basis was the concepts, hypotheses and theories presented in the works of domestic and foreign researchers. The methodology is based on a systematic approach, within which methods of comparative, factorial, subject-object; structural-functional, statistical analysis and extrapolation have been applied. Results and their significance: In order to ensure the sustainable development of the Pavlodar region in the future, there is a need to form the basis for the creation of new sectors, as well as to consider opportunities to diversify the regional economy. Currently, there is a structural change in jobs, which leads to an increased role of professional services industries in the field of information technology, engineering. It should be noted that the level of development of small, medium-sized businesses and entrepreneurship in the region is at a low level, due to the predominance of resource sectors in the economy. These sectors, due to the peculiarities of the technological process, do not form a system of suppliers around themselves. However, in order to ensure the progressive development of the industrial complex in the region, it is important to create conditions for the development of SMEs in the region and, accordingly, a system of suppliers around leading manufacturing enterprises. The high competitiveness of the Pavlodar region in the future until 2030 will be ensured through the development of priority clusters, as well as through the emergence of new industrial sectors of the economy. Thus, the priority clusters of «today» include: metallurgical cluster, including the production of end products; cluster of railway engineering; agro-food cluster.

An analysis of the mechanical, chemical and pyrogenic impact of the Baikonur Cosmodrome on the environment showed the presence of man-made impacts of the first stages (FS) used on the ecosystems of the impact zones (IZ). This article presents the concept of a controlled landing of spent launch vehicles with liquid rocket engines (LRE) in the expected zones of damage to the ecosystems of the area while maintaining the energy-optimal launch scenario of the launch vehicle. Purpose of the article - development of effective technologies for reducing the anthropogenic impact during launches of promising rockets from the Baikonur Cosmodrome based on theoretical and experimental studies of innovative technologies: reducing the area of impact of parts from launch vehicles; fire and explosion safety, no danger of rocket launchers; controlled descent of used first stages; To solve the problem, it is proposed to create an additional IASM, which will be included in the environmental management system of the Baikonur Cosmodrome. Possible design solutions are proposed based on the evaporation of untreated liquid waste from the tanks of separated parts, their fire and explosion safety, and the use of the obtained vapor-gas mixtures for controlled unloading of separated parts while moving along the landing trajectory to the optimal area. The authors of the article have developed evaluation criteria that characterize the main environmental indicators of the studied areas: fire hazard, soil cover and impact on vegetation are studied for inclusion in the IASM. There are objective requirements and basic rules for the creation of HIASM, which is an integral part of the environmental management system of the cosmodrome.

The article presents a method of teaching object-oriented programming to students of the educational program «Computer Engineering and software» using the project method. The problem of the insufficient level of organization of the educational process in colleges, aimed at studying any kind of object programming, is investigated. In this regard, the important aspects that must be taken into account when constructing a methodology for teaching object-oriented programming, aimed at enhancing the cognitive independence of students, are described in detail. It is shown that the solution to this problem largely depends on the degree of achievement of the learning goals of students specified in GOSTiPO, as well as on the methodological guide to object-oriented programming, developed in accordance with the requirements of modern education. An analysis was made of the State Compulsory Standard for Technical and Vocational Education of the Republic of Kazakhstan, the Model Curriculum and the Working Curriculum in the discipline "Fundamentals of Object-Oriented Programming" for students of the educational program "Computer Engineering and Software" and the teaching methodology developed on their basis. The purpose is to substantiate the methodology for teaching students object-oriented programming, which activates cognitive activity through the use of the project method and its practical application in the educational process. Methods: The methods of analysis, synthesis and deduction were used in the article. Results and their significance: The practical result of the analysis was the method of teaching college students object-oriented programming, using the project method, which is necessary for a more intensive development of cognitive independence. The practical significance of the results is to increase the efficiency of studying the discipline by taking into account the individual characteristics of students.

In order to successfully conduct agricultural work and obtain a competitive harvest, it is mandatory to carry out spraying operations of crops that require highly qualified personnel, expensive equipment and suitable weather conditions. The use of tractors for spraying fields is the most common solution available at the moment, has disadvantages: high cost, risk of damage to the crop by "hitting", "hooking" or otherwise; environmental damage; due to exhaust gases, the demolition of the solution increases with increasing speed. Using a device designed specifically for spraying equipment is an ideal solution. The purpose of the article is to develop a working model of an automated sprayer for processing agricultural crops. The methods used are: technical justification of a controlled device for processing agricultural crops. Calculation of functional capabilities, algorithms of operation of the proposed automated device: selection of the type of sprayer, engine, chassis, controller, battery, as well as justification of the possibilities of using alternative energy sources (wind energy, solar energy); development of a 3D model of an automation device for anti-weed processing of agricultural crops, printing of parts, assembly of mechanical and electronic parts. Making a prototype using 3D printing; development of the wiring diagram of electronics, software (firmware of the microcontroller; application that controls the settings), testing of the prototype, assembly of the current model; rationale for the optimal use of Arduino and Raspberry Pi boards in this device in a pair: Raspberry Pi will allow you to control processes on the Arduino and easily interact with the Internet when the Arduino itself will perform simple operations such as interacting with electronics and reading sensor readings. The manufactured operating model showed compliance with the goals, a high degree of controllability, environmental friendliness, reduction of energy consumed, labor resources and can be used to scale this device. The developed model of the automation device for anti-weed treatment of agricultural crops can be used not only in agricultural pollination, but also as a mechanism for studying soil parameters: humidity, mineralogical composition and chemical content in the ground, using electronic sensors, as well as an automated mobile platform for any purpose requiring accurate navigation through the territory.

The article discusses the experience of developing a computer video game by a team of students of the Department of Information Technology of the Innovative University of Eurasia within the 48-hour competition «48h Game Making Challenge» for creating video games, held in Pavlodar on October 27-29, 2022 in the IT-Hub building of the College of Information Technologies (93 Lermontov St.). Basic information about the event and a link to the registration form were published on the Instagram @digital_drive14 social network page and on the website https://digitaldrive.kz /. 8 teams from different educational institutions of Pavlodar participated in the competition. The purpose of the article is to comprehend the practical experience of developing a computer game. The team chose the Unity game engine as the environment and the main tool for developing a computer game. The Unity program is a popular development environment for interactive 2D and 3D content. The engine is completely free for the average user. The Unity engine was also chosen because it is multifunctional and uses a component-oriented approach, in which the developer creates objects and adds various components to them. The advantage of the engine was also the presence of a huge library of assets and plugins, with which you can significantly speed up the game development process. The graphics of the game were made in Photoshop. The music and sounds were taken from free sources. InEU team developed a computer game «Conqueror of the Moon» and became the winner of the contest «48 Hour Game Making Challenge Pavlodar 2022». During the development of the game, the team first chose the engine, developed the plot and concept of the game, created an image for the level and menu. Then the programmer developed the mechanics of the game, wrote code for control, time, dialogues, messages. The designers drew the environment, background, characters, created all the animations for the game and found music for the background of the menu and the game itself.

Main problem: the globalization of the information sphere has led to a significant increase in the volume of stored and processed information. To increase the processing speed and provide information to the recipient, it is logical to increase the power of the equipment on which the information is processed. But such a path also leads to an increase in financial costs for continuous modernization or complete updating of computer equipment and application software. Purpose: an alternative solution to increasing the capacity of hardware and software may be to optimize the process of organizing data storage, and already at the stage of information analysis. At the initial stages of the task, a huge amount of information is collected and processed, which needs to be classified, to identify essential and non-essential information flows for the information system being developed, etc. The quality of functioning of the developed information system as a whole and its individual modules in particular will depend on how correctly and fully the structuring and systematization of data will be carried out. Methods: modern methodologies of conceptual design of information systems shift the emphasis from software implementation to analysis and modeling of the production environment. The tools used in the process of conceptual modeling allow you to automate the main part of the processes, including the development of program code in the format of templates (patterns), including the preparation of documentation for the software product being developed. Since modern methodologies and tools are based on the use of powerful graphical tools, this significantly increases the visibility and simplifies the process of making adjustments to the information system project, actually using the "Drag-and-Drop" technology. This allows you to redistribute the time spent on the implementation of the first stages of information system development, allocating more time to the analysis and design of the software environment at an abstract, conceptual level. Results and their significance: the stages of analysis and design do not require large financial costs and are more variable. Information at these stages is easier to adjust and change than, for example, at the stage of writing program code. In addition, it is at these stages that the most active interaction between the developer and the customer is carried out, where maximum visibility and variability of the project of the future information system is required. And the use of modern software design methodologies significantly increases the efficiency of the first stages of information system design.

The main problem: In the context of the rapid development of the digital economy, where technological innovations become the engine of progress, the role of planning in the management function acquires new dimensions and comes to the fore. Digital transformation not only redefines business models, but also requires organizations to reconsider their approaches to strategic and operational planning. Planning, as an integral part of management, is becoming a key tool for enterprises to adapt to the rapidly changing conditions inherent in the digital age. In this context, effective planning does not just foresee the future, but is a catalyst for innovation, risk management and achieving strategic goals in the context of digital dynamics. The purpose of the article is to study the transformation of the planning function in modern management in the digital economy. Methods: The research is based on a thorough analysis of the works of both domestic and foreign scientists devoted to the problems of choosing and using intra-company planning tools in the context of digitalization of the economy. To achieve the goals of the research, systematic and functional approaches of scientific cognition, as well as various methods of scientific analysis and synthesis were applied. In particular, modeling methods were actively used, which made it possible to explore in more depth the interrelationships and the impact of selected intra-company planning tools on the efficiency of enterprises in a new digital context. Results and their significance: The article examines the key aspects of changes in planning caused by the introduction of digital technologies, automation and data analytics. The authors analyze the impact of the digital economy on decision-making processes, long-term and short-term planning, and also emphasize the need to adapt management methods for effective navigation in the modern business environment.

Main problem: Monitoring the reliability of the foundation of roads, buildings and engineering structures is an important aspect of geophysical research. Modeling of geological heterogeneities is relevant. Moreover, the use of computer modeling in this problem is associated with computational costs. Purpose: Analysis of the vertical electrical sounding (VES) method for modeling the physical properties of soil and their changes when exposed to elastic vibrations. Methods: To achieve the goal, the vertical electrical sounding (VES) method was used, using a one-dimensional model of the geological environment. The direct VES problem was solved by calculating the Hankel integral. Results and their significance: The study made it possible to model a large number of soil layers using the VES method. The results obtained make it possible to determine the parameters of detected objects and changes in the characteristics of the controlled environment when exposed to elastic vibrations. The significance of the results lies in the possibility of improving the method for modeling the physical properties of soil and taking into account their changes under the influence of elastic vibrations, which helps to increase the efficiency and accuracy of monitoring the reliability of the foundation.