he article presents the results of research on the idea of «conceptosphere» in modern science. The main emphasis is placed on the semantic spheres represented by the meanings of words in the language. The authors conclude how much is the culture of a nation, its folklore, literature, science, fine art, historical experience, and religion is rich, so the concept sphere of the people is richer. In addition, the concept sphere of a person is a field of knowledge made up of concepts as its units. There are reflected the sources of the conceptual unit of ideas from which the world view of the language speaker is formed. The article analyzes the main trends of concepts that form the concept sphere, which enter into correlating relationships, hierarchies with other concepts by their individual characteristics.The specific nature of the system relations of concepts requires research, but the General principle of systematicity undoubtedly applies to the national conceptual sphere, as thinking itself presupposes the categorization of thought objects, and categorization presupposes the ordering of its objects.The article summarizes the conceptual system, which should be considered in terms of mental representations, mental lexicon, and the language of thought that are part of it. The term «cognitive space» also defines an individual cognitive space – a structured set of knowledge and ideas that has any lingual person, every speaker. In their work, the authors highlight the collective cognitive space, represented by a structured set of knowledge and ideas that must be possessed by all individuals belonging to a particul ar society. Attention is paid to the distinction between the concept sphere and the semantic space of the language. According to the authors’opinions, the concept sphere presupposes the existence of a mental sphere. The mental sphere consists of concepts that exist in the form of concepts, diagrams, gestalts, mental pictures, frames, scenarios. The semantic space of a language is that part of the concept sphere that is expressed by means of language signs. The semantic space of language is the subject of co gnitive linguistics research due to the fact that most of the conceptosphere of the human ethnos is represented within the semantic space of language.

Gennady Beshkarevis a poet, novelist, publicist, memoirist who lived in Pavlodar for some time in the 30s of the last century. Among other things, in his creative heritage there are memoirs of artistic and historical interest "Pavlodarskiyebyli". In this work, in an artistic and journalistic form, social and everyday pictures are vividly conveyed, which significantly enrich our knowledge about pre-war Pavlodar. "Pavlodarskiyebyli" is especially valuable because earlier the 30s of the 20th century were considered as a kind of "white spot" in the Russian literature of the region. On charges of anti-Soviet activities, G. A. Beshkarev was sentenced to serve a five-year term in Siberian camps, and his work, which remained unpublished for a long time, only finds its readers in our time. The works of G.A. Beshkarev are included in the "Pavlodar literary"anthology on the study of Russian writers in Kazakhstan. In this regard, it is important to restore the portrait of the author's personality, and today the memories of his contemporaries, their written and oral evidencecan only help. This article is an attempt to systematize and analyze the data obtained as a result of the interview and can serve as a material for creating a biography of the writer. Conversations with the author's relatives, conducted in the fall of 2017 in Almaty by the author of the article, reveal the writer's personality traits, his attitude to various aspects of life: to the era, people, and creativity. In the memoirs of family members, Beshkarev appears as a person of rare directness and steadfastness, irreconcilable with the injustices of his time, as a person physically resistant, endowed with endurance. In the memory of friends, he is captured as a talented speaker, sometimes angry with the language, as clockwork, indefatigable, deeply artistic person of rare charm, who was able to impress colleagues, women, and students, as well as a teacher who is ready to selflessly and enthusiastically help students overcome difficulties.

The main task of microbiological study of pulmonary patients is to identify the etiology of acute and exacerbation of chronic disease in order to determine therapy and control its effectiveness. Classical methods of microbiological research consist in isolating a pure culture of the causative agent of the disease with its identification by biochemical, antigenic and other characteristics. Such studies are multistage; they impose rather strict requirements on the quality of the source material, the timing and conditions of its transportation, laboratory equipment and the precise execution of the research methodology for at least 3-5 days. Isolation of the culture of a number of pathogens (atypical intracellular microflora, anaerobic bacteria, mycobacterium tuberculosis) requires even more lengthy studies using special media and equipment. This article presents the results of a bacteriological study of pathogenic microflora in diseases of the respiratory system of the population of the Shcherbakty district of Pavlodar region for 2017-2019, including the following sequence: microscopy of native and Gram stained smears; inoculation of biological material on nutrient media for isolation and identification of the pathogen; determination of the sensitivity of the isolated microorganism to antibiotics; immunological (serological) research methods aimed at determining antigens of microbiological origin, as well as antibodies to them in the patient's body. It has been shown that conducting bacteriological studies in accordance with the requirements of regulatory documents allows obtaining reliable and comparable results necessary both for the optimal treatment of patients and for collecting and analyzing data on monitoring the emergence and spread of diseases of the respiratory system caused by pathogenic microflora.

The article is devoted to one of the unproved questions of the syntax of the Russian language – the functioning of egocentric elements in the monuments of ancient Russian writing of the XI-XIV centuries, in the chronicle genre in particular. It is the diachronic research that will help shed light on the nature, functional and semantic features of egocentric units in modern Russia. The article considers the main features of metatextual units, which, in the author's opinion, clarify the «semantic pattern» of the main text, connect, strengthen and fasten its various elements, and also manifests their role as a kind of explicators of the speaker's position in Old Russian chronicle texts. The presence of metatextual units in the chronicle text confirms the scientific position about the presence of the author's beginning in the works of Old Russian literature, which allows us to identify the author's attitude to the language code of his utterance (speech work). In general, metatextual interpretation is aimed at simplifying the understanding of an object and finding a new element base for its description.

This article reveals the essence of teaching the disciplines of the natural science cycle in English in high school. When preparing for the lesson, there is a need for careful selection of educational material, the teacher thinks out a specific algorithm for working with the text in a foreign language using subject terminology, while not forgetting the basic grammatical and syntactic models characteristic of the English language. In such a language environment, foreign speakers actively acquire solid knowledge, eliminating language difficulties in professionally-oriented lessons. Given this problem, we decided to create a methodological guide for teachers, which will contain tasks for formative assessment in physics lessons in English. Its lexical and grammatical material meets the requirements for mastering the English language (B1) in educational and cognitive activities. The presented progress tests also meet all the requirements of the corresponding stage of training of non-native speakers and help to consolidate the skills of professionally oriented communication. The purpose is to reveal some principles that should be taken into account when preparing assignments for physics lessons in English, as well as to provide a methodological guide for teachers. This article shows several principles that are most effective when conducting lessons. All the data of the article was confirmed by a computer survey of students, the answers were analyzed and collected for publication. Given the results we have presented, secondary school teachers can improve the quality of the material provided, as well as spend less time preparing for lessons. Physics is one of the fundamental sciences that can combine both the subject content and the language component. Here we present various methods of subject-language integration to improve communication skills. Thus, the preparation and conduct of physics lessons in English requires a strict and careful selection of educational material and takes into account the educational profile of secondary school students.

Main problem: Today, the opinion about inclusion as the most progressive (in comparison with integration) approach is being strengthened among the society, which allows any child, regardless of the type and severity of the disorder, to learn with their normatively developing peers. The introduction of inclusive approaches into school practice can be called one of the top priorities of the state educational policy of the Republic of Kazakhstan. Inclusive education will help to resolve the contradiction between the legally guaranteed rights of children with disabilities to equal access to quality education and the de facto inequality in its implementation. Inclusion must be systematic and focused, not spontaneous. Therefore, it is optimal to teach a child with disabilities within the framework of the system of continuous general education. The creation and effective functioning of this system is impossible without a trained teacher, who is a key figure in the implementation of inclusive education. Purpose: Substantiation and disclosure of the contradiction between the guaranteed right of children with IAD and equal access to quality education for the socialization of children with special educational needs in inclusive education. Methods: in the course of the research, descriptive, systematization and analytical methods were used in the application of theoretical concepts, government programs, and legislative acts in inclusive education. Results and their importance: The implementation of the research goal is facilitated by the use of an alternative to the classroom-based organization of the educational process for the progressive development of children with IAD, which allows them to study harmoniously, regardless of the type and severity of the violation, together with their normatively developing peers. The given pedagogical observation is the obtained practical result of this study. The development of the system of class-based organization of the educational process for children with IAD in educational institutions is aimed at forming an effective system for ensuring the comprehensive development of inclusive education.

This scientific and practical article is devoted to the analysis of the results of an experiment aimed at psychological and pedagogical support of the process of building a project for the development of the inner world of a player of a children's and youth football team of the professional football club "Lviv" from the Ukrainian city of Lviv. A special feature of the psychological and pedagogical support for designing the development of the student's psyche is the use of the paradigm of the language of the theory of activity in the version of the Moscow methodological and pedagogical circle (MMPC), using the language of schematic images and the pyramid of subjectivity, explaining the path of formation of human mental mechanisms in the unity of cognitive, emotive and conative processes, starting from the vital level of their development to the level of spirituality. Another feature of the article is that the presentation of methods and techniques does not occur in a separate part of it, but in the process of describing the steps of designing a development plan that is formed for absolutely all professional athletes who have the acmeological potential of professionalization in football. It is presented in the form of 11 steps to create an individual trajectory of the player's development. In each of these steps, it is important that the coaches and the player participate with their parents, representatives of the club, which has its own component in terms of the volume and quality of the efforts required on their part. The article reveals the first of the 4 steps of creating a reasonable player development plan. For example, we consider working with one of the players. The content of this particular illustration is a very illustrative and demonstrative example. It is assumed that a series of articles in this publication will reveal the topic of student development management, which will include both scientific and theoretical and review types of works. The next article will be a continuation of this one in terms of demonstrating the success of implementing this particular development plan by the example of several players from a team consisting of 22 players who have been trained in a similar way, i.e. using methodological criteria for the organization of psychological and pedagogical support for the development of thinking, sensory-motivational and volitional characteristics of players by football club coaches.

The main problem: This article is devoted to the key problems of the fuel and energy complex of the Republic of Kazakhstan: 1) lack of production capacity to meet the growing demand for energy and fuel from the economy and the population. Increased demand for electricity and heat, which will require the commissioning of new generating capacities.There is already a shortage in the fuel markets. Modernization and bringing the existing oil refineries (hereinafter referred to as refineries) to full capacity will not allow providing the domestic market until 2030; 2) the export orientation of raw materials, the dependence of the economy on the export of energy resources. In order to attract technology and investment in the oil and gas and nuclear industries, agreements on the extraction of energy resources were concluded with international export companies. In the medium term, Kazakhstan may face a shortage of oil for domestic refineries, if measures are not taken to stimulate its refining within the country. The uranium mined is fully exported; 3) high energy intensity of the economy, low level of energy efficiency. There is a high potential for increasing the efficiency of energy use both in the electric power industry and fuel production, and at the level of final consumption – in industry and housing and communal services; 4) decrease in the replenishment and quality of the resource base in the oil and gas, coal and nuclear industries; 5) low environmental friendliness of technologies used in the fuel and energy complex. Purpose: The purpose of the article is to reveal the problem in the field of ensuring the fulfillment of international obligations between different countries and their own energy sufficiency by gradually changing the structure of energy production. Methods: Studying the experience of increasing the efficiency of the use of energy resources and energy saving as a priority of the state policy of the country. Analysis of production capacity with a constantly forecasted shortage of primary energy resources and insufficient growth of capacity for the production of electricity and heat. Consideration of the possibility of compensating for the shortage by saving energy resources, increasing tariffs for energy carriers, as a stimulating factor for their effective use. Results and their significance: The results of this article will reflect the problems of energy, as the most important driving force of global economic progress. The well-being of the people depends on the state of the country's energy sector, therefore there is an urgent need to solve the emerging problems. The global energy problem is, first of all, the issue of stable and efficient supply of fuel and energy to mankind. Today, the energy sector of Kazakhstan is focused on fuel resources, since the country is provided with hydrocarbons and other energy resources. About 72 % of electricity in Kazakhstan is generated from coal, 12,3 % from hydro resources, 10,6 % from gas and 4,9 % from oil. Thus, the four main types of power plants generate 99,8 % of electricity, while alternative sources account for less than 0,2 %.

The development of extraction techniques of medical plants aims to maximize the bioactive compounds production. Тechnologies in this area of industry have not high enough еfficiency factor. In some cases, it reaches only 40-50 %. Therefore, development of new methods to effectively extract different compounds from plant material and their input into large-scale industry is of great importance. The goal is to determine an effective and suitable technology for extracting bioactive compounds from medical plant. This is a narrative review paper which focuses on different extraction methods of medical plant. To find relevant articles for this narrative review, 73 articles were reviewed. Of these, 14 irrelevant documents were discarded. This review analyses various extraction processes to guide the selection of suitable methods for various types of medical plants and applications. This is done by outlining traditional and modern methods of extraction techniques, exploring the importance of solvents for extraction, and comparing novel and alternative methods of extraction. In conclusion, based on the current knowledge, solvent extraction is the most common method for medical plants extraction. Enzymatic hydrolysis and supercritical extraction are advanced techniques with high yield of compounds. However, more research is needed for some modern extraction methods.

Globalization is an integral part of our life. Therefore, today the relevance of learning foreign languages, in particular English, is beyond doubt, as interest in foreign culture, education, travel, life and work abroad increases. It is known that English is the most widespread international means of communication (including information technology and web space), for most of the population it is the native or state language. This is due to historical, political and geographical prerequisites, as well as socio-economic and cultural development. Proficiency in English opens up great prospects for those who know, but not every person chooses a linguistic direction of study when entering a higher educational institution. Mastering English is a laborious process. In universities of non-linguistic areas, one of the main problems for students is the so-called language anxiety and psychological barriers, especially for those students for whom English is not a core subject or direction of future activity. Overcoming language anxiety and psychological barriers continues to be an urgent issue in pedagogical psychology and the educational process of higher educational institutions. Therefore, the task of the teacher is to create such conditions in his classes so that the student has a desire to learn, develop himself and improve himself. It is necessary to form motivation for conversational skills through psychologically thought-out techniques and methods. The task of the teacher is to direct the student from a conniving and indifferent attitude to study to a conscious and positive attitude. To implement the above, the teacher needs to form the old motives and stimulate new, positive ones. The encouragement of positive manifestations of emotions should be supported, stimulated and helped to realize these emotions by the teacher in the educational process. For example, simple tasks, but at the same time fascinating, the manifestation of sincere emotions in the classroom by the teacher himself and his personal examples inspire students to pronounce their state of mind and experiences. Encouraging and highlighting the activity of students also helps to increase the motivation of learning, especially if they have creative ideas that differ from other fellow students. The purpose of the article is to describe the methods of teaching conversational skills, their advantages and disadvantages and to consider in detail the overcoming of language barriers when learning a foreign language. The methodological basis of the research was the works of such authors as: H.F. Makaev, O.S. Zorkina, V.P. Ipatova, L.V. Barinkova, E.V. Zarubina, E.I. Kaputskaya, E.I. Passov, E.G. Asimov, A.N. Shchukin and others. Critical analysis of scientific and methodological literature on the problem, study and generalization of positive experience of teachers; collection of empirical information, experiment, quantitative and qualitative data analysis. The results of the study can be used in the process of developing practical recommendations for psychological work with students in order to increase their motivation to learn a foreign language. In addition, these results can be used by teachers to correct and improve the effectiveness of the educational process.

Language is the main vector of communication, in turn, communication develops languages throughout the history of mankind. The natural need of people is communication in their native language, the most convenient means of self-expression and understanding of others. However, modernity has changed the global paradigm of communication, indicating a reassessment of the role of languages by both official and informal communities, including native speakers of various languages. Moreover, the choice of a common communication language is influenced not only by the context, but also by the social, cultural, and economic characteristics of the communicants. In an intercultural context, there is a problem of adaptation of communication participants, closely related to the mastery of the language of the receiving party, ignorance of which is a barrier to successful communication. To develop the skills of tolerant communicative behavior, it is necessary to create special programs equipped with the necessary teaching materials available in international communication languages. Some of these workshops are offered in the presented article. Purpose of the article is to determine the influence of language on the development of economic processes that unite people of different linguistic and socio-cultural backgrounds, as well as to describe the influence of interacting languages on various aspects of professional activity and the role of education in introducing new generations into an intercultural context. To achieve the purpose, the following tasks were put forward: presentation of the main provisions of the economic theory of language; highlighting the controversial role of translators when working with companies in an intercultural environment; identification of problems and the role of teaching foreign languages to students for their successful adaptation in an intercultural professional context. The theoretical and methodological basis was the concepts, hypotheses and theories presented in the works of domestic and foreign researchers. The methodology is based on a systematic approach, in which methods of comparative, structural-functional, and statistical analysis were applied. To obtain empirical data, the methods of questioning and interviewing respondents included in the system of intercultural communication were used. Based on the results obtained, it can be said that, as a rule, in most cases, preference is given to the common language of communication, which is either one of the international languages or the language of the titular nation. Ethnic ties, trust and tolerance are often associated with the possession of a common language of communication.

Main problem: in conditions of increasing competition, when characterizing commercial structures, a fundamental role is given to innovations, which occupy important place in economic life of the organization. Accordingly, the study of their essence and content is of particular importance for growth of competitiveness of organizations, which determines the relevance of study. Purpose: to investigate essence of innovation and innovation process in retrospect and in modern conditions as main prerequisite for improving competitiveness of commercial organizations. Achieving this purpose required solving following research tasks: to reveal the content of theoretical approaches to the study of the main aspects of interaction between business and government in modern science; the differences between the concepts of “novelty”, “know-how”, “innovation” are investigated; the relationship of the triad of concepts “novelty”, “know-how”, “innovation” is determined; concept of “innovation” has been studied in retrospect; concept of “innovation” in market economy is studied (foreign experience); approaches to definition of concept of "innovation" in international innovation theory and practice are defined; content of innovation process is presented, as well as author’s alternative scheme of innovation process; authorэs view on interpretation of concepts of “innovation”, “innovation process” in modern conditions is presented. Methods: theoretical and methodological basis was concepts, hypotheses and theories presented in works of domestic and foreign researchers. The methodology is based on systematic approach, within which methods of comparative, factorial, subject-object, structural-functional, statistical analysis and extrapolation have been applied. Results and their significance: article examines concepts of “innovation”, “innovation process” in retrospect and in modern aspect. Approaches to concept of "innovation" are systematized, an alternative scheme of innovation process is proposed. It is proved that in modern conditions innovation should be considered as process system reflecting all aspects of innovation process, main purpose of which is to achieve efficiency

In order to successfully conduct agricultural work and obtain a competitive harvest, it is mandatory to carry out spraying operations of crops that require highly qualified personnel, expensive equipment and suitable weather conditions. The use of tractors for spraying fields is the most common solution available at the moment, has disadvantages: high cost, risk of damage to the crop by "hitting", "hooking" or otherwise; environmental damage; due to exhaust gases, the demolition of the solution increases with increasing speed. Using a device designed specifically for spraying equipment is an ideal solution. The purpose of the article is to develop a working model of an automated sprayer for processing agricultural crops. The methods used are: technical justification of a controlled device for processing agricultural crops. Calculation of functional capabilities, algorithms of operation of the proposed automated device: selection of the type of sprayer, engine, chassis, controller, battery, as well as justification of the possibilities of using alternative energy sources (wind energy, solar energy); development of a 3D model of an automation device for anti-weed processing of agricultural crops, printing of parts, assembly of mechanical and electronic parts. Making a prototype using 3D printing; development of the wiring diagram of electronics, software (firmware of the microcontroller; application that controls the settings), testing of the prototype, assembly of the current model; rationale for the optimal use of Arduino and Raspberry Pi boards in this device in a pair: Raspberry Pi will allow you to control processes on the Arduino and easily interact with the Internet when the Arduino itself will perform simple operations such as interacting with electronics and reading sensor readings. The manufactured operating model showed compliance with the goals, a high degree of controllability, environmental friendliness, reduction of energy consumed, labor resources and can be used to scale this device. The developed model of the automation device for anti-weed treatment of agricultural crops can be used not only in agricultural pollination, but also as a mechanism for studying soil parameters: humidity, mineralogical composition and chemical content in the ground, using electronic sensors, as well as an automated mobile platform for any purpose requiring accurate navigation through the territory.

The article is devoted to the study of the main types of retort packaging, as well as polymer and combined materials used for its manufacture. The authors have compiled a classification of retort packaging presented on the modern market, investigated the technological properties of packaging materials, and also determined the requirements for modern retort packaging: resistance to sterilization at a temperature of at least 120°C, steam and moisture resistance, chemical inertia to canned products, tightness, low gas permeability. It has been established that in order to give the retort packaging the required properties, it is made of multilayer polymer or combined materials, each of the layers of which performs certain functions. It is determined that due to the barrier properties of polymer and combined materials with respect to oxygen, retort packaging provides shelf life of canned products up to 5 years, which allows the use of retort packaging made of polymer and combined materials as an alternative to glass and metal packaging. In experimental studies, the composition of the outer layers of modern retort packaging was analyzed and it was concluded that polypropylene or polyethylene terephthalate are most often used, since these polymer materials are thermally and chemically resistant, vapor- and moisture-proof. It is established that materials that are barriers to gases are used as the middle layer – aluminum foil, metallized films, ethylene vinyl alcohol, polyamide. It is proved that polymer co-extrusion, multilayer injection molding or lamination is used for the manufacture of such materials and packaging. The data obtained indicate the high barrier properties of combined packaging materials, therefore, the thermal and chemical stability of the polymer and combined materials used makes it possible to use retort packaging for packing almost all groups of canned products.

Main problem: the globalization of the information sphere has led to a significant increase in the volume of stored and processed information. To increase the processing speed and provide information to the recipient, it is logical to increase the power of the equipment on which the information is processed. But such a path also leads to an increase in financial costs for continuous modernization or complete updating of computer equipment and application software. Purpose: an alternative solution to increasing the capacity of hardware and software may be to optimize the process of organizing data storage, and already at the stage of information analysis. At the initial stages of the task, a huge amount of information is collected and processed, which needs to be classified, to identify essential and non-essential information flows for the information system being developed, etc. The quality of functioning of the developed information system as a whole and its individual modules in particular will depend on how correctly and fully the structuring and systematization of data will be carried out. Methods: modern methodologies of conceptual design of information systems shift the emphasis from software implementation to analysis and modeling of the production environment. The tools used in the process of conceptual modeling allow you to automate the main part of the processes, including the development of program code in the format of templates (patterns), including the preparation of documentation for the software product being developed. Since modern methodologies and tools are based on the use of powerful graphical tools, this significantly increases the visibility and simplifies the process of making adjustments to the information system project, actually using the "Drag-and-Drop" technology. This allows you to redistribute the time spent on the implementation of the first stages of information system development, allocating more time to the analysis and design of the software environment at an abstract, conceptual level. Results and their significance: the stages of analysis and design do not require large financial costs and are more variable. Information at these stages is easier to adjust and change than, for example, at the stage of writing program code. In addition, it is at these stages that the most active interaction between the developer and the customer is carried out, where maximum visibility and variability of the project of the future information system is required. And the use of modern software design methodologies significantly increases the efficiency of the first stages of information system design.