The purpose of this article is to review the main possible areas of international cooperation of the law enforcement agencies of the Commonwealth of Independent States in combating human trafficking. The authors, based on an analysis of the existing international instruments to combat trafficking in persons, reveal details of the main directions of the international cooperation of the CIS countries’ law enforcement bodies, implemented through: the partial transfer of competence, a joint investigation of criminal cases, as well as the extradition of a person for criminal prosecution.

The development of the oil refinery is directly related to the peculiarities of the socioeconomic environment, which is determined largely by the favorable conditions of activity of all branches of economy of the Republic of Kazakhstan, a stable regulatory processes of all normative -legal framework of implementation of market reforms and efficiency of making management and innovative solutions in the oil refining industry of the Republic of Kazakhstan. Currently, a lot of efforts are being made to scale modernization of all production processes, as well as modernization of equipment of the oil refining complex of the country

The article discusses a way to increase the efficiency of automobile operation by improving methods for ensuring the operability of electrical equipment based on the diagnosis of generators by output voltage. As a diagnosis, it is proposed to perform a spectral analysis of the generated voltage in idle mode and to determine the state of various generator elements from the results. The effectiveness of the proposed solutions is determined by the non-separable diagnostics of the generator, which, based on a thorough examination, can determine the state of various elements of the generator. This method does not require taking the generator out of operation, does not depend on its design and can be used in difficult operating conditions to obtain preliminary information about the state of the generator at the initial stage of maintenance.

The aspects of delivery system development of the public services submission to the population in the Republic of Kazakhstan are observed in this article on the basis of monitoring results.

This article contains synopsis of some aspects of the consteructionand operation of grid-systems, in order to give an idea of this technology. It also contains the list of existing projects, to demonstrate this technology potential

This article deals with the deposit policy banks. Determined that the savings accounts are the most diverse and the basis for their classification is the criteria of the sources of contributions, their intended use, the degree of profitability. The focus is on the definition of criteria, goals and objectives. This article can be viewed as the formulation stage for further research in the master's thesis.

In given article the essence and necessity of management of credit risk is considered. Also the detailed classification and structure of credit risk is given.

At present in Kazakhstan, the growing importance of innovation's activation is experiencing as a promising area of intensive economic development. This places new demands on organizational and regulation mechanism of innovative process at an enterprise and influences upon changes in strategic priorities in structure and content of the process of innovation development itself. In this regard the particular relevance for effective enterprise operation becomes the management of innovative development, which is possible due to established mechanism of organization and regulation of innovative process.

The article considers the methods of rationalizing the process of heating the refractory materials of aluminum electrolyzers up in relation to thermal stresses arising in the hearth lining. The functional goals of the refractory materials are listed. The operational characteristics of the refractory materials are presented. During thermal influence on a hearth lining, the physical effects called thermal expansion occur. The materials which save their properties under high temperature are known as refractory materials. The thermostability is described in more detail. The scientific test bench was used to investigate ultimate strength. The method of temperature and pressure measurement when conducting the experiments is cited. In order to choose the potlining it is necessary to know the peculiarities of refractory materials and actual industrial loadings as precisely as possible.

This article discusses the benefits of cluster development, problematic aspects hindering the development of clusters in the Republic of Kazakhstan. According to statistics, in Kazakhstan so far failed to dramatically increase the innovative activity and effectiveness of the companies to create a competitive environment that encourages the use of innovation. Among the main problems should be attributed lack of qualified personnel, insufficient quality and availability of transport and engineering infrastructure, low level of institutional development of the cluster, limited access to foreign markets. Therefore, it is important to correlate the level of development of cooperation ties and incentive mechanisms, the level of technological equipment and organization of production, the level of competitiveness of suppliers, including the quality and technological level of the supplied products and services.

This article discusses some of the practical application of cavitation technologies in autonomous heating systems, attached elementary economic calculation. The modern achievements and cavitation vortex heat generators, principle of operation and types of such equipment. Marked positive and negative aspects of installation and operation of heat generators. A comparative analysis of the economic calculation of seasonal operating costs of the vortex heater as auxiliary heating systems and district heating tariffs for Pavlodar.

In the article, the problem-oriented analysis of the current state of water transport of Ukraine based on the current geopolitical situation was made. The author has made an attempt to identify and organize internal and external factors that influence the innovative development of water transport of the Ukraine, that increase the efficiency of its operation under current conditions.

The main directions of increasing the reliability and electrical safety of power distribution networks are considered in the article. The schemes of the main directions of development and improvement of electric grids are given.

The article presents new tools for managing labour safety to conduct behavioral safety audits, transforming meetings and labor protection councils into cascade committees, to implement technical and safety standards, and to use new assessment and motivation system and methods of internal incidents investigation.

The work analyzes the emergency situations that occurred on the territory of the Pavlodar region. The main causes of emergencies of natural and man-made nature are presented. The article contains the results of the analysis of the effectiveness of management in a safety-related system in the Pavlodar region and recommendations for improving the safety-related system during the emergency relief operations.

The main provisions of the road quality management concept are outlined, as well as the tasks are defined that need to be solved in order to ensure the management of the system at three levels: strategic, tactical and operational.

The variants of the use of carbon as a heat-generating material in the agro-industrial complex are highlighted. This will significantly save energy, improve the environment, reduce the cost of operation, repair and maintenance of buildings and structures.

The article analyzes the system of development, design, storage and operation of normative and technical documentation in regional university. Measures are proposed to improve the quality control of normative and technical documentation, including a project to improve the quality control of technical documentation.

This article discusses the methodology for assessing the education system of the Republic of Kazakhstan using international tools and government programs that are currently in operation, as well as the causes and consequences of measures aimed at improving the indicators and results of the transformation of the education system. The mechanisms of creating an independent education system as a public institution are considered

The problems of formation and development of the Kazakhstan labor market cannot be solved without state support. The state should become a “catalyst” in the cooperation and interaction of employers, trade unions, and local authorities in ensuring maximum and effective employment. The article considers the influence of the state on the regulation of employment of the population

During the preparatory activities for the preparation and conduct of the KShU, the civil defense plans for peace and wartime were adjusted and clarified, the calculations of forces and resources for conducting emergency response activities were refined and their readiness checked. Checked the combat readiness of the units taking into account work in extreme conditions and the provision of personnel with equipped interchangeable clothing. Additional briefings have been organized on compliance with safety measures for fighting fires and performing emergency rescue operations. Autonomous sources of energy supply, stocks of material and technical, food reserves were checked. In general, the forces and facilities of the units of the Service are on daily round-the-clock alert duty and are ready to meet the set tasks for eliminating emergencies and situations at the first alert.

The article is devoted to solving the optimization problem of finding an energy-efficient mode operation of one of the types of energy-intensive industries with the properties nonlinearity, inertia, and isolation. An optimization model based on a genetic algorithm is considered as a solution method. Moreover, the calculation of the fitness function for the selection of chromosomes is proposed to be calculated on the basis of fuzzy logic

The present article analyzes the problematic issues of digitalization of the automotive industry, motor transport and logistics in the Republic of Kazakh stan. The main emphasis is made on the consideration of positive results for the economy and society, which is the digitalization of the automotive industry, transport and logistics, the analysis of the tasks and content of digitalization in these sectors, the analytical study of the prospects of legal regulation of the automotive industry, motor transport and road logistics in the form of domestic legislative and international legal means to improve digitalization in these areas. The names and substantiation of 7 draft laws of Kazakhstan, which could be adopted in the near future by the Kazakh legislator, Вестник Инновационного Евразийского университета. 2019. № 2 ISSN 1729-536X 35 are proposed. The most important and priority bills include: «On state management of digital (creative) economy», «On the development of intelligent transport system in production and operation», «On the introduction of digitalization in the activities of companies, enterprises and institutions », «On the improvement of logistics based on digital technology along all the Kazakhstan roads».

Different diagrams of thermal pumps operation at thermal power plants are considered in the article. Thus, installation diagrams are considered for thermal pump based on the use of low -grade heat of turbo-unit lubricating system oil and blow-down water of a steam generator.

The article is devoted to the current problem of differential diagnosis of diseases of viral etiology in small domestic animals. Viral diseases of dogs and cats are widespread among both high-breed and outbred animals. The spread of diseases is facilitated by an increase in the number of small domestic animals, the popularization of pet keeping, and cross-border operations related to the movement of animals. The possibility of using means and methods of diagnosing adenovirus infection in cattle, tentative diagnosis and differentiation of infectious hepatitis in dogs from plague of carnivores and parvovirus enteritis is being considered. Reducing the timing of diagnosis helps to increase the effectiveness of ongoing therapeutic and antiepizootic measures. The analysis of the place of carnivorous infectious hepatitis in the structure of the incidence of dogs is given. The article describes the research in the field of the possibility of using the established antigenic relationship of representatives of the adenovirus family for the in vivo and posthumous diagnosis of infectious diseases of small pets. The authors proposed a method for performing the production of serological reactions for the diagnosis of infectious hepatitis in dogs using diagnostic tools for adenovirus infection in cattle.

Annotation. The research topic is directly connected with the solution of the nationwide issues of the social and labor policy of the Republic of Kazakhstan, based on the globalization and regional processes in the world, the experience of its implementation in the regions and, first of all, in the Eurasian Economic Union member-states. Another important factor is the comparative consideration of social policy and labor potential of Kazakhstan, Russia, Belarus, Armenia, Kyrgyzstan taking into account national and common interests. At the present stage, the issues of illegal labor migration and human trafficking in our country are given special attention. The main aim of the research is developing recommendations and proposals, aimed at further progress of the legal framework for cooperation in the social and labor sphere and the social protection of labor rights as a promising area of legal science and as an important line of social and integration policy. The research also aims at the research and examination of human trafficking and labor migration as a social phenomenon in the EAEU countries, the study of methods and techniques of combating it, and the development of recommendations for improving legislation and strategies to counteract this social phenomenon.

This paper presents the results of the influence of ultrasonic treatment in the cofermentation of the cattle manure mixture (cattle) with the leaven from the rumen of ruminants on the process of biogas production. Anaerobic digestion was carried out in matinence periodic operation at the mesophilic temperature of 38 C ̊. As a substrate, a mixture with a content of 70 % cattle manure and 10 % leaven from rumen of ruminants was used. Treatment with ultrasound of the mixture was carried out at an intensity of 10 W/cm2 and an amount of input energy of 9350 kJ/kg of dry matter (DM), which completely eliminated the processes of stratification and sedimentation. Decomposition of organic matter (OM) in the periodic regime with the enzyme and ultrasound treatment occurred within 8 days, the usual substrate during this time OM decomposed 3.0 times less (only 14 %). The process of fermentation of methane in continuous and periodic modes treated with ultrasound, as at other temperatures, was stable, as can be judged by the values of volatile fatty acids (VFA) Volatile fatty acids (VFAs), alkalinity, pH, and biogas. The energetical efficiency of methane fermentation is estimated by comparing the volume of fuel (biogas) and heat consumption for technological needs. As shown by the comparison of efficiency of different regime, the largest amount of commercial energy in the form of biogas was obtained in the mode of joint fermentation of a mixture of cattle manure (cattle) with a ferment from the rumen of ruminants treated with ultrasound – 3 times more than without treatment (space).

In this article, the author examines the problems of legal regulation of public procurement in a state of emergency and quarantine measures. The purpose of this article is to study the changes that have appeared in the legislation of the Republic of Kazakhstan in connection with the introduction of the state of emergency and quarantine in the country. The author provides a legal assessment and analyzes the new norms of Kazakhstani legislation regulating public relations in the field of organizing public procurement. The closure of state borders, the violation of the usual, accumulated over the years, economic ties led to disruptions in the economic activities of state bodies. With all the disadvantages that took place, the positive factor was that the demand for the goods of Kazakhstani producers on the market increased. The introduced new method of public procurement using framework agreements made it possible, in turn, to ensure the guaranteed sale of products of Kazakhstani commodity producers, and also made it possible to apply import substitution of frequently purchased goods. In this article, the author, on the basis of a study of the current practice in this area, demonstrates the features of legal regulation of the sphere of public procurement in completely social new conditions with the help of novelties in legislation, and also reveals the features of the operation of legal norms regulating the sphere of public procurement of goods, works and services in conditions of a state of emergency and quarantine measures. The adoption of special measures by the Government of the Republic of Kazakhstan made it possible to transfer financial and economic relations in the state to a new format – "customer-supplier". The measures taken by the government have now been extended until the end of 2020. These measures on the part of the Government of the Republic of Kazakhstan made it possible to introduce a sparing legal regime for regulating this area for representatives of medium and small businesses, in order to minimize the losses of the latter arising against the background of the introduction of a state of emergency and quarantine measures. Taking into account the analysis of judicial practice in the consideration of cases on public procurement, the author emphasizes that in conditions of quarantine measures in Kazakhstan, as a rule, there are violations of the same type, both on the part of customers and on the part of suppliers.

In this article, the author examines the features of the pre-trial stage of the investigation in the investigation of kidnapping. The initial stage of the investigation consists of: starting a pre-trial investigation, conducting urgent investigative and procedural actions and attracting a person as a suspect. The initial stage of the investigation of a crime, including kidnapping, is crucial for the implementation of further qualitative and offensive investigation of criminal acts. The purpose of this article is to study the natureand features of the beginning of the pre-trial investigation of kidnapping. In the course of the study, the author used such methods of scientific research as: dialectical, system, method of qualitative and quantitative analysis, generalization and study of literary sources, comparative legal, historical-legal, system-structural and formal-logical methods, as well as the method of system analysis. Activities to identify signs of a crime must be considered through the prism of the beginning of a pretrial investigation. Currently, the beginning of a pre-trial investigation, from the point of view of criminology, refers to very specific types of organizational activities at the initial stage of the investigation of a kidnapping. The detection and investigation of kidnappings is highly complex, requiring law enforcement officials to maintain strict secrecy. If there is a reason provided for by the criminal procedure law to start a pre-trial investigation, the investigator or an employee of the body of inquiry is obliged to establish the presence of sufficient data indicating signs of kidnapping. To do this, it is necessary to carefully study the content of the application, compare the available factual data. The beginning of a pre-trial investigation should not be an end in itself of the activities of the pre-trial investigation bodies. At the same time, their offensive and proactive work on all received facts, information and operational materials is extremely important, because it is the embodiment of the active position of the law enforcement system inthe direction of preventing and suppressing possible illegal encroachments on personal freedom, including the suppression of those criminal actions that are in the stages of their preparation or beginning.

Annotation Main problem:The main idea of this study is the development of proposals for improving the legislation of the Republic of Kazakhstan, as well as the regulatory framework of the Eurasian Economic Union, taking into account the experience of the EuropeanUnion countries (as the largest integration association), towards the further development of the legal framework for cooperation in the social-labor sphere, as well as improving the integration and migration policy of the Eurasian Economic Union countries in general, and the Republic of Kazakhstan, in particular. In addition, this study intends to develop practical recommendations aimed at improving the activities of the law enforcement agencies of the Republic of Kazakhstan, as well as the EAEU countries, in the field of combating illegal migration and forced labor on the territory of this integration association. Moreover, this project suggests the legal promotion of the results obtained, both on the territory of the EAEU and beyond. Purpose: The aim of the study. To develop proposals for improving the legislation of the Republic of Kazakhstan and the EAEU countries in the field of legal regulation of labour migration and counteracting its negative consequences such as illegal migration, forced labour in the territory of this integration association. Methods: The methodological basis of the study is made up of traditional general scientific and special legal methods used in comparative jurisprudence: system-structural, historical-legal, social-legal and comparative-legal. Results and their significance:All of the above testifies to the relevance and necessity of research in the framework of this study, since its implementation, taking into account the expected results, will further improve the regulatory framework in the field of combating illegal migration, human trafficking and other illegal manifestations resulting from insufficient regulation of the labour migration sphere.

When solving project tasks, it is necessary to take into account the maximum number of possible solutions that contribute to the efficiency of the object. When analyzing the activity of multifunctional objects, such solutions are all the more important, since they allow, taking into account the specific features of the object, to make the most rational design decision, especially if these solutions are associated with the ability to solve environmental and energy-efficient problems. The decisions made can take into account both the operation of the object itself and the infrastructure that provides the solution with the necessary engineering solutions. The most difficult thing in making project decisions is to systematize the studied situations and analyze informative sources. Systematization of methods of pre-project analysis, generalization of the experience of project work on the example of designing a roadside service object. Wepropose forms that facilitate the structuring of information sources, as well as logical tables that give an idea of the specifics of the choice of positions and directions that allows quickly come to an understanding of how to implement project tasks. Awareness of the methods that allow organizing the logic and sequence of design processes in design and architectural design allows the author to identify the most important problems from his point of view and fit them into the range of design tasks. The search for answers to these problems is formed by ways of structuring information and displaying it in pictorial structures, where the word takes on the meaning of a specific symbol, in a chain of connections that determine the understanding of the integral process of functioning of the future object, taking into account all aspects of its activity.

The progress of work on the creation of an "intelligent transport system" in Kazakhstan, the development and modernization of the road industry will be reported. The economic and social effectiveness of several transport corridors and new projects were analyzed. Transport corridors of foreign countries, methods of providing logistics services were presented. In his address, the head of state paid special attention to the issues of digitalization of all spheres of life of the population, including the transport sector of Kazakhstan. Currently, the Ministry of investment and development of the Republic of Kazakhstan is working on the creation of an "intelligent transport system" within the framework of the state program «Digital Kazakhstan» (ITS). ITS goal is to systematically integrate transport infrastructure, transport devices and users with modern information and communication technologies aimed at improving the safety and efficiency of the transport process. The concept will include 11 components in ITS. One of them is a special automated measuring instruments (UAVs), which are installed in the main automobile corridors. This device is designed to measure moving vehicles without contact and eliminate unjustified stops. This year, it is planned to put into operation 10 units of RSPP, and by 2020 it is planned to increase their number to 46 units. It is also planned to introduce a traffic management system that will inform drivers about the situation on the roads, a system for forecasting and analyzing climatic conditions, which is carried out through a network of weather stations along the roads, a network of video monitoring and special video cameras for detecting traffic violations, toll road systems that cover the cost of maintenance of the national road network, etc. They will be introduced in stages until 2021. The implementation of this project will reduce road deaths, increase the volume of transit traffic and the speed of logistics services, fully cover the main highways with measuring instruments and create favorable conditions for drivers on the roads. Such systems are already operating in South Korea, Japan, Australia, Europe and the United States.

The article presents the results of implementing a quality management system at the enterprise. The study and analysis of the international standard ISO 9001:2015, as well as sanitary and epidemiological requirements for production control were carried out. The main requirements and rules for the implementation of input, operational and output control of products at enterprises at all stages of the product life cycle were identified and presented. In addition, it was determined what requirements must be met by enterprises to implement a quality management system. It is important to note that this work is necessary at the enterprise, as it has the following advantages: by improving product quality, product sales increase, the level of management of the enterprise and personnel increases, and cost savings are realized at the stages of development, production and operation. It follows that to implement a quality management system, it is necessary to set the following tasks: describe the company's processes, develop performance criteria and evaluate processes, develop the necessary documented information, implement documentation in all departments, familiarize them with the quality policy and goals, conduct timely internal audits for further SWOT analysis, and conduct an assessment by an external auditor in order to obtain a certificate of compliance. An important step in quality management is that the organization should not eliminate nonconforming results of processes, but should identify potential nonconformities, assess the risk with the preparation of a Protocol, plan and implement actions to reduce risks. Difficulties may arise: lack of understanding by the staff of the need to implement a quality management system, lack of a clear vision, mission, lack of complete information on processes, lack of quantitative and qualitative evaluation criteria, quality is defined as the quality of products, not as the quality of processes, resources, lack of monitoring of customer satisfaction. It is possible to overcome these difficulties only with the implementation of the quality management system according to ISO 9001, since the requirements prescribed in the international standard are a real tool for improving the efficiency of the enterprise, which will help bring the organization to a higher level of development.

The main problem is that money plays a huge role in a market economy. The market is impossible without the movement of money that carries out the turnover of goods and services. The movement of money serves the sale of goods, as well as the movement of the financial market. The cash resources of an industrial enterprise are an integral part of current assets. The money is needed for settlements with suppliers and contractors, for making payments to the budget, for issuing salaries, bonuses to employees, and for making other types of payments. The meaning of the organization of funds is to effectively manage the cash flows of an economic entity on the basis of data obtained from the results of the analysis of cash flows for a certain period of time and accounting data. Information support is a system of information and methods of its processing that allow us to assess the real state of an industrial enterprise and identify factors that contribute to improving the effectiveness of management decisions. In these conditions, it becomes inevitable to improve the information support for accounting and auditing of funds. The purpose of this study is to identify the problems of accounting and auditing of funds at industrial enterprises by improving information support. The implementation of the research goal is facilitated by the use of methods of comparative analysis, synthesis, graphical method for visualizing the results obtained. For any enterprise, it is necessary that there is enough money at the beginning of the production cycle, and at the end their growth is ensured. With such business management, a constant turnover of funds will be ensured, which will provide the enterprise with an influx of funds, and will make it possible to carry out activities in other areas (investment or financial) at the expense of the money generated by the main activity. In a market economy, it is necessary to proceed from the principle that the skillful use of funds brings additional income to the enterprise, and, therefore, the enterprise should constantly think about the rational investment of temporarily free funds to make a profit. The authors analyzed the cash flow by type of activity on the basis of financial statements, and developed recommendations for solving the problems of accounting and auditing of funds, which are aimed at improving cash flow management, which will allow an industrial enterprise to achieve its goals and plans as much as possible.

The main problem: This article is devoted to the key problems of the fuel and energy complex of the Republic of Kazakhstan: 1) lack of production capacity to meet the growing demand for energy and fuel from the economy and the population. Increased demand for electricity and heat, which will require the commissioning of new generating capacities.There is already a shortage in the fuel markets. Modernization and bringing the existing oil refineries (hereinafter referred to as refineries) to full capacity will not allow providing the domestic market until 2030; 2) the export orientation of raw materials, the dependence of the economy on the export of energy resources. In order to attract technology and investment in the oil and gas and nuclear industries, agreements on the extraction of energy resources were concluded with international export companies. In the medium term, Kazakhstan may face a shortage of oil for domestic refineries, if measures are not taken to stimulate its refining within the country. The uranium mined is fully exported; 3) high energy intensity of the economy, low level of energy efficiency. There is a high potential for increasing the efficiency of energy use both in the electric power industry and fuel production, and at the level of final consumption – in industry and housing and communal services; 4) decrease in the replenishment and quality of the resource base in the oil and gas, coal and nuclear industries; 5) low environmental friendliness of technologies used in the fuel and energy complex. Purpose: The purpose of the article is to reveal the problem in the field of ensuring the fulfillment of international obligations between different countries and their own energy sufficiency by gradually changing the structure of energy production. Methods: Studying the experience of increasing the efficiency of the use of energy resources and energy saving as a priority of the state policy of the country. Analysis of production capacity with a constantly forecasted shortage of primary energy resources and insufficient growth of capacity for the production of electricity and heat. Consideration of the possibility of compensating for the shortage by saving energy resources, increasing tariffs for energy carriers, as a stimulating factor for their effective use. Results and their significance: The results of this article will reflect the problems of energy, as the most important driving force of global economic progress. The well-being of the people depends on the state of the country's energy sector, therefore there is an urgent need to solve the emerging problems. The global energy problem is, first of all, the issue of stable and efficient supply of fuel and energy to mankind. Today, the energy sector of Kazakhstan is focused on fuel resources, since the country is provided with hydrocarbons and other energy resources. About 72 % of electricity in Kazakhstan is generated from coal, 12,3 % from hydro resources, 10,6 % from gas and 4,9 % from oil. Thus, the four main types of power plants generate 99,8 % of electricity, while alternative sources account for less than 0,2 %.

The main problem: The article deals with the issues of hiding text information in a graphic file. A formula for hiding text information in image pixels is proposed. A steganography scheme for embedding secret text in random image pixels has been developed. Random bytes are pre-embedded in each row of pixels in the source image. As a result of the operations performed, a key image is obtained. The text codes are embedded in random bytes of pixels of a given RGB channel. To form a secret message, the characters of the ASCII code table are used. Demo encryption and decryption programs have been developed in the Python 3.5.2 programming language. A graphic file is used as the decryption key. Purpose: To develop an algorithm for embedding text information in random pixels of an image. Methods: Among the methods of hiding information in graphic images, the LSB method of hiding information is widely used, in which the lower bits in the image bytes responsible for color encoding are replaced by the bits of the secret message. Analysis of methods of hiding information in graphic files and modeling of algorithms showed an increase in the level of protection of hidden information from detection. Results and their significance: Using the proposed steganography scheme and the algorithm for embedding bytes of a secret message in a graphic file, protection against detection of hidden information is significantly increased. The advantage of this steganography scheme is that for decryption, a key image is used, in which random bytes are pre-embedded. In addition, the entire pixel bits of the container image are used to display the color shades. It can also be noted that the developed steganography scheme allows not only to transmit secret information, but also to add digital fingerprints or hidden tags to the image.

Currently, close attention is paid to industrial safety at hazardous production facilities. Compliance with industrial safety requirements is directly related to the risks of accidents that can lead to man-made disasters, negatively affect the health and life of the population. As in any other industry, there are problems in ensuring industrial safety. There are several reasons for this: the backlog of standards from scientific and technological progress, the exclusive competence of state authorized bodies, and the lack of a risk-based approach. After the collapse of the USSR, the requirements of industrial safety in the Republic of Kazakhstan have practically not changed: laws and statutory instruments (hereinafter-the LSI) are approved and put into effect, after which they are constantly changed and supplemented; the presence of national and international standards, which, in fact, are revised on the basis of the USSR standards, taking into account the influence of the realities of the time. It can be concluded that the current standards are not focused on the future, scientific and technological progress, innovation, so they are constantly undergoing changes, thereby adapting to the necessary requirements that dictate modernity. State regulation does not contribute to the effective development of industrial safety. This is due to the fact that the state performs exclusively supervisory functions (thus it is exclusively educational in nature), and there is no dialogue between authorized state bodies, expert organizations, scientific organizations, and testing laboratories. If we consider the experience of the Russian Federation in the field of industrial safety, then it makes no sense to accept even some experience, since: similar to the Kazakhstan’ LSI and regulatory and technical documentation (and their constant dynamics), the development of cooperation with the Russian Federation within the framework of the Eurasian Economic Union. Accordingly, it is advisable to consider the experience in the field of industrial safety in Europe and the United States of America because of the effectiveness of regulation and supervision than in the Republic of Kazakhstan and the Russian Federation. This article provides information about international experience in the field of industrial safety in the United States and the European Union. The tasks of state regulation in the field of industrial safety in the Republic of Kazakhstan, the Russian Federation, the United States, and the European Union are described in detail. The analysis of normative-legal acts and normative-technical documentation is carried out. Based on the analysis of international experience, solutions to problems in the field of industrial safety for the Republic of Kazakhstan are essentially presented. The purpose of this article is to reveal the problem in the field of industrial safety in the Republic of Kazakhstan and international experience that the Republic of Kazakhstan can borrow in order to effectively ensure industrial safety. Study of international experience (USA, EU countries, Russia) in the field of industrial safety in terms of: analysis of standards; regulation (control and supervisory functions) to ensure safety. The results of this article will reflect the problems that hinder the effective provision of industrial safety in the Republic of Kazakhstan and essentially suggest ways to solve them.

The article is devoted to the development of a technology for obtaining organic fertilizers from poultry waste based on biocatalytic processes. Currently, many poultry farms have become sources of environmental pollution, thereby causing serious environmental problems and economic and social damage. The problem of reliable protection of the natural environment from pollution by bird droppings is currently relevant. In the area of operation of large poultry farms, air pollution by microorganisms, dust, foul-smelling organic compounds, which are decomposition products of organic waste, as well as nitrogen, sulfur, and carbon oxides, is possible. Bird droppings contain acids, nitrogen, phosphorus and potassium, heavy metals. The content of nitrogen, phosphorus and potassium changes dramatically depending on the quantity and quality of the feed. Humic substances isolated from brown coal have a sufficiently high sorption activity and are used as cheap sorbents for solving a number of environmental problems in industry. These studies are aimed at minimizing the main disadvantage of the anaerobic digestion process, the low reaction rate, which leads to the need to create large-volume bioreactors. On the basis of the research carried out, a technology has been developed for obtaining organic fertilizers from poultry waste by the method of anaerobic fermentation of chicken manure with humidity at a temperature of 27 °C - 50 °C with the addition of sodium humate. The resulting fertilizer is intended for use in agricultural production, horticulture, floriculture, forestry, municipalities, in household plots in order to increase the yield and quality of crop production. For the developed technology, an application has been submitted for obtaining a Patent for the invention of the Republic of Kazakhstan «Method for producing organic fertilizers» (priority No. 2021-22818, dated July 13, 2021). The invention allows to significantly reduce the time of fermentation, to enrich the product with organic and mineral products contained in sodium humate, to convert the salts of heavy metals into an insoluble state, to improve the environmental friendliness of the method.

Main problem: The article analyzes water quality assurance as the main goal of preserving human health. The study of chemical and microbiological parameters of wastewater and drinking water was carried out using generally accepted standards. The number of deaths associated with the use of contaminated drinking water, according to WHO, tripled in 2021 and reached almost 19 thousand against 6 thousand in 2020. In addition, the number of neoplasms, diseases of the genitourinary system, digestive organs and skin increased by 2 %, to 1.486 million. The reasons for the increase in the level of harmful chemicals and microbiological pollutants in the water are outdated sewage treatment plants, old pipes and disinfection with chlorine. Purpose: Study of the quality of wastewater and drinking water in Pavlodar, study of the quality of wastewater and drinking water in Pavlodar. Methods: Sampling of wastewater, chemical and bacteriological analysis of wastewater and drinking water, statistical method, correlation analysis of experimentally obtained results and calculated characteristics, etc. Results and their significance: In the field of public health risk, pollution of reservoirs that are sources of household drinking water supply and recreational water use, the continuing necessary high deterioration of water supply networks, their accident rate, as a result of low level of operation, failures in the operation of treatment facilities. Hygienic assessment of reservoirs according to complex indicators indicates the continuing high degree of water pollution in places of water use. The water quality indicators of the surface reservoirs of the region remain low in terms of sanitary and chemical (primarily organoleptic and general sanitary), as well as microbiological indicators. According to toxicological indicators, the level of water pollution in places of water use is estimated as moderate. The main pollutants of the Irtysh River in Pavlodar are industrial enterprises and housing and communal facilities that discharge untreated or insufficiently treated wastewater into reservoirs. A complex of causes of drinking water pollution has been identified: high deterioration of water supply networks, their accident rate, because of a low level of operation, failures in the operation of treatment facilities, unfair treatment of industrial wastewater by industrial enterprises of Pavlodar, etc. Priority preventive directions for improving the quality of water as a source of life are the implementation of long-term targeted planning of measures for the modernization of water supply and sewerage networks and facilities in Pavlodar. The state of water supply necessary and measures to improve it should be constantly monitored and considered at meetings of sanitary and anti-epidemic commissions.

Combustion engines operate over a wide range of power and speed. To the greatest extent, this applies to automotive and tractor engines and diesel engines operating at fractional and idle loads for a significant part of the operating time. When designing engines, the choice of their main design and layout parameters is carried out in a comprehensive manner, taking into account the provision of the required power and efficiency in the modes of maximum torque and rated power. However, ensuring the economical operation of modern highly accelerated diesel engines at low loads and idling causes a whole range of problems related mainly to the organization of effective mixture formation and fuel burnout, as well as to ensuring stable fuel supply. Thus, the cycle dose of injected fuel in idle mode is 8–12 times less than the cycle dose in nominal mode, which determines increased requirements for fuel equipment and difficulties in ensuring high-quality mixture formation. At the same time, diesel engines operate in idle mode up to 50 % of the total operating time, consuming up to 15–20% of the fuel. For truck engines, the relative idle time is approximately 20–25 %. Thus, the development of measures to improve the efficiency of diesel engines at idle is relevant. The purpose is to perform a numerical analysis of the effect of switching off cycles in diesel engines for autotractor and diesel locomotive purposes on the working processes in the cylinder and the indicator parameters of the cycle in idle modes. When writing the article, traditional methods (comparison, description, and measurement), generallogical methods and research techniques (analysis, generalization, etc.) were used. A numerical analysis of the operating cycle of a diesel engine equipped with a cycle shutdown system was performed. The relationship between changes in fuel injection characteristics when cycles are turned off with indicator indicators of the engine operating cycle in idle load modes is disclosed. It has been established that the expediency of switching off cycles in a specific engine operation mode is determined primarily by the features of the injection, carburetion and fuel burnout processes.

Main problem: Today electronic information is one of the important resources in the management system. Electronic information resources are not only means, but also control flows. For example, any instruction or instruction in the management system is actually a guide to action. At the same time, for example, data on the movement of an object (employees, goods, money, etc.) are information resources, the storage and accounting of which is the basis of the organizational process. Large flows of information require their structuring, and operations on them become time-consuming. One of the ways to solve this problem is the development and implementation of an information system. Purpose: To analyze and design an information system using specialized tools designed to optimize the implementation of the above stages of software system development, using the example of a real business process. Methods: The article discusses the methodologies of CASE tools designed to automate software development processes, namely, the first two stages of the life cycle: analysis and design of a software product. The analysis and design of the business process functionality is carried out using the IDEF0 functional modeling methodology. The design of the database structure of the information system was carried out using the methodology of semantic (information) modeling IDEF1X. Description of the scenario of the designed software for a real business process is carried out using the dynamic modeling methodology IDEF3. Results and their significance: The article substantiates the relevance of the use of modern CASE-technologies in the process of analyzing and designing a future information system, as well as for the purpose of possible optimization on the example of a real business process "Inventory accounting". As a result, a comprehensive business process model was built using tools based on CASE-methodologies. The resulting model, as well as the description of its construction, is a clear example of the use of CASE technologies for software developers, as well as system analysts and IT specialists.

The concept of resilience, the ability to withstand crises and adversities and recover from them, has valuable potential for research, intervention and preventive approaches aimed at strengthening the family. There are many paths to relationship resilience, varying depending on different forms of family, psychosocial problems, resources and constraints. Shared beliefs that promote alignment and cooperation are vital to overcoming adversity. Measures to increase the resilience of families are of timely importance to overcome the rapid social changes and uncertainties that families face today. According to research by sociologists and family consultants, each family goes through several stages of development, and the transition from one to another is usually accompanied by a crisis. It is generally believed that domestic difficulties lead to complications in family life, first of all. The purpose is to identify the types of problems and causes leading to crisis situations in marriage. In this regard, the methods such as analysis of literary sources on this topic, generalization, synthesis, psychological experiment, diagnosis of the psychology of family crisis by H.I. Olioirovia, T.A. Zinkevii-Kuzemkin, T.F. Velenta were used. The authors of the article come to the conclusion that stress is a part of life, and the slings and arrows of misfortune hit all families throughout their lives. The concept of family resilience confirms the reparative potential of all families and offers a valuable basis for research and clinical practice. Just as families face a variety of challenges, there are many ways to increase family resilience. By understanding key processes, clinicians can mobilize untapped resources, allowing families in distress to cope with difficulties more effectively and recover through their mutual support and cooperation. Therefore, it is necessary to understand the patterns of crisis situations and the socio-psychological causes of their occurrence.

In order to successfully conduct agricultural work and obtain a competitive harvest, it is mandatory to carry out spraying operations of crops that require highly qualified personnel, expensive equipment and suitable weather conditions. The use of tractors for spraying fields is the most common solution available at the moment, has disadvantages: high cost, risk of damage to the crop by "hitting", "hooking" or otherwise; environmental damage; due to exhaust gases, the demolition of the solution increases with increasing speed. Using a device designed specifically for spraying equipment is an ideal solution. The purpose of the article is to develop a working model of an automated sprayer for processing agricultural crops. The methods used are: technical justification of a controlled device for processing agricultural crops. Calculation of functional capabilities, algorithms of operation of the proposed automated device: selection of the type of sprayer, engine, chassis, controller, battery, as well as justification of the possibilities of using alternative energy sources (wind energy, solar energy); development of a 3D model of an automation device for anti-weed processing of agricultural crops, printing of parts, assembly of mechanical and electronic parts. Making a prototype using 3D printing; development of the wiring diagram of electronics, software (firmware of the microcontroller; application that controls the settings), testing of the prototype, assembly of the current model; rationale for the optimal use of Arduino and Raspberry Pi boards in this device in a pair: Raspberry Pi will allow you to control processes on the Arduino and easily interact with the Internet when the Arduino itself will perform simple operations such as interacting with electronics and reading sensor readings. The manufactured operating model showed compliance with the goals, a high degree of controllability, environmental friendliness, reduction of energy consumed, labor resources and can be used to scale this device. The developed model of the automation device for anti-weed treatment of agricultural crops can be used not only in agricultural pollination, but also as a mechanism for studying soil parameters: humidity, mineralogical composition and chemical content in the ground, using electronic sensors, as well as an automated mobile platform for any purpose requiring accurate navigation through the territory.

It is known that the nutritional value of proteins is primarily characterized by the composition of essential amino acids and is determined by their accessibility. Not just proteins are necessary for the good functioning of the human body, but a certain amount of essential amino acids. Since the lack or absence of any of them causes serious health problems. The problem of protein malnutrition is global for many reasons and to solve it, it’s necessary to study the prospects for the possible use of non-traditional sources of dietary protein, namely vegetable protein. Considering this, the article presents the results of studies conducted over several years, the objects of which were dairy and vegetable products and protein hydrolyzate from chickpea flour. At the same time, the possibility of its use as a filler of plant origin to improve the physicochemical and structural-mechanical properties of a new type of finished product was determined. The purpose of these studies is to develop a recipe and determine the technological stages of production of a new type of product of dairy and vegetable origin, which has a functional focus, in which vegetable products are used together with dairy components. It should be noted that when selecting components, preference is given to raw materials grown in the local region. When developing the recipe, the optimal amount of chickpea protein hydrolyzate to be added was determined, which makes it possible to give the finished product not only attractive commercial characteristics, which the modern consumer primarily pays attention to, but also to obtain such product properties that will help strengthen the immune system and the resistance of the human body to adverse conditions environment, what is especially important for the younger generation. When developing the technology of a new dairy-vegetable curd mass, the optimal modes of each technological operation and the stage at which it is most expedient to apply a vegetable component are determined. Launching the developed product into production, the manufacturer will not face the problem of the lack of the necessary equipment and its expensive acquisition, since the production organized according to the proposed technology is maximally adapted to the equipment available at enterprises engaged in the production of cottage cheese and curd products.

The ideas of accelerated disclosure of the spiritual, intellectual and professional potential of a person have always been occupied by scientists and teachers (Ya.A. Komensky, K.D. Ushinsky, V.A. Sukhomlinsky, Ya. Korchak, A.S. Makarenko, A. Kunanbayev, Y. Altynsarin and others). Modern innovative teachers are guided by a personality-oriented approach, the ideas of subject-subject relations, and generational cooperation. Georgian teacher Sh. A. Amonashvili wrote: «humanitarian pedagogy perceives the child by his nature. He sees the infinity of the child, understands his cosmic quality and prepares him for the service of humanity throughout his life. It establishes the personality of the child through the determination of his will and builds pedagogical systems, the procedural of which predetermines love, optimism and high spiritual morality. Humanitarian pedagogical thinking seeks to take on something enormous, and this is the power of educational systems and processes that have arisen in its bowels». In order to realize the value of self-disclosure of innovative abilities of students, ensuring the role of a teacher, it is necessary to recognize the intellectual reflexive mechanism of a person as the main subject of Education. The purpose of the article is to identify innovative methods and models of pedagogical activity for the cultivation of innovative abilities of students, which determine the development of the country. The study used methods such as analysis, generalization, synthesis, modeling of scientific sources.

The present stage of development of power systems is characterized by the need to increase their intelligence, that is, the formation of an environment capable of solving the problems of effective management of all components included in the power system. One of the features of modern energy systems is an active consumer, that is, a consumer who has the opportunity to optimize the schedule of loading their capacities, planning energy consumption, intellectualization of energy consumption. In addition to the fact that there are digital systems for collecting, processing and presenting information, as well as transmitting this information via the Internet, to solve the most difficult task of managing power systems, it is necessary to develop a large number of models adequate to real processes that can describe the processes taking place in the power system under consideration. The purpose is to develop models capable of adequately describing the interrelated processes occurring in the considered elements of the power system, as well as in the aggregate of related elements; development of methods that allow solving problems of effective control of elements of energy systems on the basis of the proposed intelligent models. To solve the problem of increasing the intelligence of the power system, nonlinear adaptive models of electrical complexes of an energy-intensive enterprise included in the power system were developed on the basis of balance equations and artificial intelligence methods. The production of alumina with the properties of inertia, nonlinearity and closure is chosen as the production under consideration. This type of production was chosen as the most difficult to predict due to the unpredictability of changes in energy consumption during the transition to other modes of its operation, associated, for example, with the receipt of raw materials with a different chemical composition for processing. Static and dynamic models of energy consumption of electrotechnical complexes with continuous inertial nonlinear closed production based on artificial intelligence methods have been developed, which makes it possible to eliminate the need to use long time series of retrospective data. For the considered type of continuous energy-intensive production, dynamic characteristics of energy consumption and technological processes are obtained from the main controlled parameters, which make it possible to predict emergency situations and partly man-made disasters. On the basis of a genetic algorithm, a multiparametric optimization problem of energy management of continuous production has been solved, taking into account technological parameters and cost factors.

The article is devoted to the development of technological parameters for the production of gluten-free pasta, as well as to the study of the influence of physico-chemical factors on the formation of the structure and organoleptic parameters of gluten-free pasta. The authors studied modern approaches to the production of gluten-free food in Kazakhstan. During the study, the main types of raw materials used in the production of gluten-free pasta of functional orientation were identified. For the production of a new product, a reasonable choice of raw materials and functional ingredients was carried out, the formulation and production technology were developed, all temperature and time modes were described, physico-chemical, organoleptic parameters of the new product were studied, a production flowchart was developed. The purpose of the article is to develop the technology of gluten-free pasta enriched on the basis of corn, rice flour and meeting the requirements for specialized food products, with the addition of functional and flavoring ingredients to expand the range of gluten-free products in the Republic of Kazakhstan. In experimental studies, the formula of a new gluten-free paste based on rice and corn flour with the addition of flaxseed flour, soy protein isolate «EdimCo», xanthan gum, dietary fiber (psyllium), Supermak booster was developed. The complex results of organoleptic and physico-chemical parameters of whole-grain flour for the production of new gluten-free pasta are presented. The results of organoleptic and physico-chemical indicators, as well as safety indicators of finished gluten-free pasta are presented. The article presents the technological parameters and time modes of the production process of fresh pasta, including the following basic operations: preparation of raw materials at t = 10 0C, kneading pasta dough at t = 40-45 0C, vacuuming at 40-10 kPa, pressing (extrusion) at 7 min, 10-12 MPa, drying and stabilization at 10-12 MPa, cooling of dried products t = 20-25 0C 4 hours, packaging of finished products at t = 35 0C and relative humidity 70 %.

The main problem: In the context of the rapid development of the digital economy, where technological innovations become the engine of progress, the role of planning in the management function acquires new dimensions and comes to the fore. Digital transformation not only redefines business models, but also requires organizations to reconsider their approaches to strategic and operational planning. Planning, as an integral part of management, is becoming a key tool for enterprises to adapt to the rapidly changing conditions inherent in the digital age. In this context, effective planning does not just foresee the future, but is a catalyst for innovation, risk management and achieving strategic goals in the context of digital dynamics. The purpose of the article is to study the transformation of the planning function in modern management in the digital economy. Methods: The research is based on a thorough analysis of the works of both domestic and foreign scientists devoted to the problems of choosing and using intra-company planning tools in the context of digitalization of the economy. To achieve the goals of the research, systematic and functional approaches of scientific cognition, as well as various methods of scientific analysis and synthesis were applied. In particular, modeling methods were actively used, which made it possible to explore in more depth the interrelationships and the impact of selected intra-company planning tools on the efficiency of enterprises in a new digital context. Results and their significance: The article examines the key aspects of changes in planning caused by the introduction of digital technologies, automation and data analytics. The authors analyze the impact of the digital economy on decision-making processes, long-term and short-term planning, and also emphasize the need to adapt management methods for effective navigation in the modern business environment.

Main problem: For several years, the state has been trying to reduce bureaucratic processes with entrepreneurs, make accounting transparent, reliable and with less labor costs. At the moment, without digitalization in accounting, it is impossible to predict the further development of trade and economic relations in general, since it significantly affects the sale, movement and shipment of goods. The gradual transition of the economy of the Republic of Kazakhstan to the path of digitalization can be considered the most important condition for the development of both the country’s economy and the Eurasian Economic Union. Digital inspection is the process of monitoring goods using digital systems, which helps reduce the risk of human error. In the context of digitalization, work with documentation should be structured in such a way that access to them is ensured throughout the entire limitation period, thereby facilitating the taxpayer in making the right economic decisions. The purpose of this article is to consider the gradual integration of digitalization into the field of accounting for both small and medium-sized businesses, and also to consider its impact on the business processes of organizations. The main objective of the article is to consider the introduction of digitalization into business processes and possible problems during its integration, as well as to identify ways to eliminate them without losses for both the state and small and medium-sized businesses. Methods: In the course of writing this article, a dialectical approach was mainly used, which made it possible to examine in detail the process of reflecting and controlling document flow when moving goods in the context of digitalization. Approaching the issue theoretically and summarizing practical experience, it was possible to identify the positive and negative aspects of accounting and control of the movement of goods on the territory of the Republic of Kazakhstan and beyond its borders in the conditions of rapidly developing digitalization. Results and their significance: This article reflects the main directions of modernization of accounting and operational accounting in Kazakhstan in the context of the progressive digitalization of the economy. The necessity of creating an information environment for managing economic processes and optimizing the operational activities of an enterprise is substantiated, and the positive and negative aspects of the integration of various information systems and modules for maintaining accounting and operational records at an enterprise are considered

The relevance of this article is that the impact of human economic activity on the natural environment is becoming comparable in scale to geological factors. In this regard, the importance of protecting the biosphere has increased immeasurably. The earth is the only common home of all earthlings. Society, including us, cannot help but worry that the planet has approached a critical ecological threshold. The main goal of the research that we set for ourselves in this article is to create a predictive model for overcoming the environmental crisis in the following areas: environmental education, greening technologies, administrative and legal direction, international cooperation. To achieve the result, we tried to process as much information as possible, analyze the situation, draw appropriate conclusions and propose our own model for overcoming the environmental crisis. The hypothesis is that environmental pollution, improper disposal of household and industrial waste, and poor environmental culture have a detrimental effect on the ecology of the city, poisoning the environment and public health. The main research methods used were methods of empirical knowledge - these are observations, survey methods, questionnaires, as well as theoretical methods. The results of these studies can be used to inform the population about the impact of waste on human health, as well as the importance of storing, recycling and obtaining secondary raw materials, in order to reduce the amount of garbage on city streets. And also about the existence of unauthorized waste collection sites and administrative responsibility for the creation of such landfills in the city and in the surrounding area, this is an educational activity in all areas of education, starting from preschool institutions, the media, advertising agencies, NGOs, environmental authorities and also, using international experience, in the construction of a solid waste processing plant in his hometown.

Main problem: One of the priority directions for improving the management system at the enterprise is the organization of effective interaction between strategic and operational management through the formation of a mechanism for their interaction, orienting operational management to achieve strategic goals and objectives. In market conditions, issues of interaction between strategic and operational production management are particularly relevant, allowing solving complex economic problems of the enterprise related to the rational use of resources involved in production, reducing production costs, improving the quality of products, optimizing production potential in order to increase the efficiency of the entire enterprise as a whole and its structural divisions. The role of the mechanism of interaction between strategic and operational production management also lies in the possibility of coordinating those final strategic goals that the enterprise strives for with the actual internal production capabilities. The purpose of this article is to study the issues of interaction between operational and strategic management of an enterprise in a market environment. The theory and modern practice of production management in a competitive environment show that the implementation of operational production management is a natural stage in the implementation of strategic management, therefore, there is a close relationship between them, which manifests itself in their interaction. Methods: The methods of analysis and generalization, the method of systematic and comparative analysis, structural and functional method, economic and mathematical methods, graphical and tabular method were used in the work. Results and their significance: the authors consider the theoretical aspects of the relationship between strategic and operational production management at an enterprise in a competitive environment. There is a low level of compliance of operational tasks of production with the strategic goals of development of domestic enterprises and the special role of information systems designed to link operational and strategic management tasks together. Accordingly, the key aspects of information technology implementation are investigated, including the need for employee training, strategic communications planning, information flow management and the use of data analytics. Examples of successful application of information technologies in various industries and organizations are given.