In the article, the authors give a brief overview of approaches about the essence of the concept of "quality of education" in preschool education, as well as justify the need to use in formation and communication technologies in the assessment of the quality of education.

The article considers the views among domestic and foreign scientists on such concepts as: expenses, costs, expenses; the authors also generalize the classification of costs necessary for their regulation and increasing the efficiency of the enterprise as an important socially-oriented subject of the system of economic relations.

Analysis of use of information resources is directly connected with the formation and evaluation of system of indicators of organizational and structural capabilities, material and technical level of ensuring information activities, information capacity of personnel, the quality of information provision of administrative activity.

The article presents the results of analysis of the model quality «career development» and its impact on the quality of products in terms of production pipe rolling PB LLP «KSP Steel».There are defined the main factors affecting the quality of career development of the employee. A new model improving the «quality of life» is suggested.

A method of solving symmetric polynomials of two variables is presented in the article. Several of such problems have been solved. There are very hard problems among them which were included in Mathematical Olympiads.

In article it is shown that in a control system of efficiency of the company accurate focus on result and the coordinated movement of all organizational elements to the uniform purpose is. It is reached by creation of a tree of the purposes and definition of the most critical areas for control and control indicators of efficiency a consequence of that is the increase in cost of the company.

The article presents the results of a study of personnel management system, conducted in a large coal mining company, which had revealed certain weaknesses in the organization of the management of personnel along with the lack of strategic quality planning. Additionally, there are recommendations made for the improvement of methods aimed at assessment of competitiveness of personnel.

In this article theoretical aspects of account of expenses are observed, which allows to analyze movements of leaving means, and also to operate financial resources.

This article describes the issue of improving the quality of the products as a way to improve the competitiveness of enterprises.

The abstract views the questions of consortium organisational structure in the system of higher education as one of the integration forms and providing of competitiveness

This article discusses the possible options to stimulate informal assistance in Kazakhstan system of long-term care for elderly and disabled persons over the age of 18 years who need to be cared for 8 or more hours daily. Developed in the context of world experience the norms and rules of allocating financial resources in order to optimize partnership between levels of State and family care will increase the levels of quality of life for elderly and people with disabilities.

This article focuses on identifying the challenges of quality management of the educational process in the university survey conducted by students of the 2nd year of academies Innovation Eurasian University in 2011-2012. The results showed that students are full and objective evaluators of quality of the education. Also, thanks to the survey was to qualitatively improve the educational process.

The results of social and Pavlodar economic capacity analytical assessment are considered in the article. The social sphere and its development is a main direction of economy state regulation. Its state is mainly determined by processes of labor resources, their quantity and quality, level of productive power scientific and technical development, cultural and spiritual life of society.

Theoretical and practical aspects of quality management of teachers’ continuous education, main tools, methods, approaches and trends in the monitoring development in qualification increase system are considered in the article. The research has been carried out by a case study of «Orleu» Institute of teachers’ training in Pavlodar region».

In this article the questions of quality assurance in modern construction, quality control of construction materials, methods of control testing of structures, and also the reasons of defects occurring during manufacture of works.

This article describes theoretical and practical aspects of regional media, particularlies of media for teenagers, functions performed by the print media, as well as intensive development of regional youth media by the example of the regional children and youth newspaper “Your world”. The authors presented expectations analysis of youth readers.

In this article issues of efficient use of ferroalloys production waste to save costs are considered; energy efficiency of agglomerate production is calculated; sintering heat balance data are presented by a case study of Aksu Ferrolloy Plant. According to the annual economic benefits calculation the folowing results are obtained: due to аglogases recirculation, fuel saving is 1334.5 t.o.e.; due to reheating it is 1491 t.o.e.; due to installation of thyristor converters to the unit the annual energy saving is 1714000 kWh. Thus, it is identified that besides energy-efficiency measures during recycling of solid and gaseous wastes, the use of agglomerate increases IPF electric furnaces performance as well, decreases specific energy and reducing agent consumption which means the prime cost of finished products will be reduced.

This article is written in line with the important questions on antimicrobial effects of natural honey against gram-positive bacteria to reveal the therapeutic properties. These circumstances demonstrate the medical and social significance of solving the science-oriented task of developing high-quality pharmaceutical product on the basis of honey as well as its application not only as a preventive and medicinal agent to treat many illnesses but also as in beauty treatment.

This article discusses the benefits of cluster development, problematic aspects hindering the development of clusters in the Republic of Kazakhstan. According to statistics, in Kazakhstan so far failed to dramatically increase the innovative activity and effectiveness of the companies to create a competitive environment that encourages the use of innovation. Among the main problems should be attributed lack of qualified personnel, insufficient quality and availability of transport and engineering infrastructure, low level of institutional development of the cluster, limited access to foreign markets. Therefore, it is important to correlate the level of development of cooperation ties and incentive mechanisms, the level of technological equipment and organization of production, the level of competitiveness of suppliers, including the quality and technological level of the supplied products and services.

This article views the research methods allowing by the organoleptic and physical and chemical indicators to estimate the honey naturality and approximately determine its origin due to the results of the analyses. The factors influencing the quality of the produced honey have been considered and the chemical Вестник Инновационного Евразийского университета. 2015. №3 ISSN 1729-536X 167 composition of the useful components of honey has been studied. It is shown that Kazakhstani honey can be rather competitive at the world market and the main task is the increase the honey production without changing its quality.

In the article it is considered the questions of mechanisms’ effectiveness of interation of mass-media and government bodies of the Republic of Kazakhstan. The main problems of these sphere are introduction of information in mass-media through the system of state purchases, directed on the prices; the lack of the system of indicators on the estimation of mass-media services quality in the process of state purchase and the problem of control, censure and self-censure caused by state purchases conditions. The study makes it clear that the introduction of the system of public procurement has expanded the practice of self-censorship of publications. In conclusion, the author suggests ways to address the problems in the interaction of state bodies with the media.

This article deals with the theoretical aspects of demographic policy of Kazakhstan, as well as analysis of the problem and the demographic situation in the Republic of Kazakhstan. Also it studies target of demographic policy and government measures to improve the demographic situation in the country. There is another reserve; it is those people who live in other countries are similar in many respects to the Kazakh people, and who want to live in Kazakhstan. Today it is especially important to make the new apartments available to the population and reduce the cost of their cost. In connection with the transformation of the republic into a huge construction site of the construction industry should be developed intensively

In this article the process of socialization of the young generation is examined in the new system of market relations, taking into account his adaptation in a sociocultural environment. Development of social motivation based on the increasing of pursuance of receiving higher education taking into account new market tendencies in social and educational sphere has special relevance. Increasing of interest in the problems of students leads to accumulation of empiric and theoretical material about learning activity motivation, motivational preferences and system of values of the students, social status of the students of higher educational institutions, about attitude to higher education system and quality of teaching in higher educational institutions.

In the article the author is dealt with, how the interpersonal relationships influence to the formation of personality. It is described what kind of relationships are dominated to others. It is shown that students of the college tend to cooperate, able to compromise in solving problems, enterprising, they want to be in the centre of attention, sociable, able to show compassion, but this can only be an external “mask”.

New approaches in the system of monitoring of educational achievement standardized assessment results are needed. To organise educational process effectively, to plan work of ensuring high quality educational services and inform public about the state of educational system. The article books into the system of assessment at the modern stage of higher education, new approaches in the system of monitoring of educational achievements, peculiarities of test technologies. The article also compares the current system of assessment and the assessment system within renovation in educational system, pays attention to the monitoring system of students’ achievement.

The article is devoted to the quality of the educational process, when medical colleges get more additional responsibility for the results of their educational activities, the attention of preparing nurses is able to increase the efficiency of the health system in the Republic of Kazakhstan. These are nurses of new pharmacy in accordance with the contemporary challenges of society and the international standards. This area is considered as part of the educational program of applied bachelor degree nursing in Pavlodar medical college.

This article discusses some of the practical application of cavitation technologies in autonomous heating systems, attached elementary economic calculation. The modern achievements and cavitation vortex heat generators, principle of operation and types of such equipment. Marked positive and negative aspects of installation and operation of heat generators. A comparative analysis of the economic calculation of seasonal operating costs of the vortex heater as auxiliary heating systems and district heating tariffs for Pavlodar.

Education is one of the priority directions in the development of our state. It is impossible to talk about modernization of education without monitoring its quality. The article considers a differentiated approach to learning, the conditions under which this approach can be applied. Two main criteria of the differentiated approach are singled out: level of training and learning ability. The article gives recommendations on the phased implementation of differentiation. Positive and negative parties of different types of control of education quality are also presented. Most objective is the differentiated test control. The article reveals its characteristics, the possibilities of using it in lessons in primary school.

The renewal of the paradigm of 12-year education is associated with the formation of key competencies in students that help to learn, understand and develop the world around. The developed set of tasks is designed to develop the need to transform educational material with the aim of improving the quality of education. This material is compiled in accordance with the age characteristics of primary school students, is aimed at organizing the processes of mastering new ways of acting, which will contribute to the formation of educational and cognitive activities. The issues discussed in the article will allow us to implement a competence approach in the education of students. The tasks presented in the article are intended to activate the educational motivation, the organization of independent cognitive activity, contribute to the systematization and objectification of the processes of monitoring and evaluation of educational activities.

This article mainly deals with the role of healthy lifestyle in strengthening pupils` health. The relevance of the issue of healthy lifestyle modeling arises out of the fact that heath is one of the most significant life values of a person and a guarantee of his or her welfare longevity. Currently, due to the low life expectancy of people, it is crucial to foster the meaning of health as the main value in one`s life and importance and necessity of health preservation from the early childhood. Life preservation requires dedicated and persistent efforts from every person. Herewith, it is necessary to understand one fact: life preservation is a personal prerogative. If one is to always be healthy one must remember that it requires persistent, dedicated and considerable efforts. Therefore, it is crucial to have a long course of personal conduct that designates the general culture of our labour and rest management, rational combination of physical and mental workload, sensible nutrition, active leisure and good quality sleep, and, moreover, skills of safe conduct in different dangerous emergencies. All of it composes the system of healthy lifestyle.

In this article the question connected with the activation of cognitive activity of students. It one of issues of the day on the modern stage of development of pedagogical theory and practice. An author exposes development of activity, independence, initiativeness, creative approach to the thing, these are the requirements of life, qualificatory that direction in that it is necessary to perfect an educational process in a great deal. Searches of ways of development of schoolchildren’s activation of cognitive activity, developing their cognitive flairs and independence is a task that teachers are called to decide. The use of ICТ, that allows to activate thinking, ability to offer the variants of vision of problem, question, themes in the narrow and wide understanding and participating in the discussion are examined in the article. It helps to improve quality education, forms a culture, aesthetic skills of students, develop attention, memory. All this has a practical orientation in different areas and spheres of activity of student. Information technologies, examined in this scientific article as a process of the use of totality of facilities, methods of collection, treatment and communication of data - assists working off at the methods of students of actions, helps forming of processes of self-government of personality, will transform an effectively-practical sphere and carries out the emotionally-semantic going near the study of questions, that discussions, professional orientation.

The nature of a person reflects the history of relationships with the external environment. In the behavior lies the broad meaning of the concept. Accentuation of the nature is a strongly developed feeling in which the priorities and, in particular, the priorities of behavior are manifested. Accentuation is always a certain strengthening of signs, so it is a sign of personality accentuation. Nature formation is a lifelong process. Joint life forms of thoughts, feelings and modes of action. Therefore, along with the formation of a certain life-style image of a person, its " self", a quality that is determined by the appearance.

The main directions of increasing the reliability and electrical safety of power distribution networks are considered in the article. The schemes of the main directions of development and improvement of electric grids are given.

In this article, quality of life as priority and one of directions of social-and-economic development of the state are considered. The quality of life of rural population and his social security, state of economy of agroindustrial complex and development of rural territories are distinguished in article. The issues of rural territories are considered, as exemplified by rural district. In the Republic of Kazakhstan there are all terms that is needed for development of agriculture. For the height of quality of life of rural population are needed substantial adjustments of public agrarian policy and also increase of social responsibility of the state and business.

This article describes the mechanism of budget management. The tools to improve the efficiency of budget revenue have been identified. The material is presented as exemplified by the budget of Zhelezinskiy district. The transition from budgeting based on the principle of "cost control" to the formation according to the principle "management by results" is justified. In this regard, in the financial sector a new concept – result-oriented budgeting (ROB). The tree of problems of the state financial control and the ways of their solution are offered. The article has practical importance, since the problems described in a currently particularly relevant.

The article deals with the basic concepts of the formation and development of higher education system of the Republic of Kazakhstan. As well as the policies of redistribution of responsibilities of management in higher education system and its gradual decentralization that will not only distribute power and responsibility, but also introduce a more democratic form of government. Expand the autonomy institutions of higher education and ensure active public participation in the management of higher education institutions and the quality of its educational programs. One of the fundamental factors is to attract students to identify the competencies of employers, academic communities, graduates. Learning objectives at the same time should be determined in accordance with the professional requirements of the labor market.

The article states a primary school is an uninterrupted level of primary education, this quality of success is determined a future of a person. Formation of success in educational upbringing process is the main problem of primary school. Successes of primary class learners are considered by social-and-pedagogical aspect. The article shows educational methods of formation successes of primary class learners.

The article describes the basic trends of IT management in the educational process of higher educational institutions. The problem of transition to a new model of education quality, determined by the State Program of Education development of the Republic of Kazakhstan for 2016-2019, causes a broader implementation of information technologies in the process of education. The paper presents the main reasons according to which educational institutions use information systems, as well as the possibility of the results of the introduction of information technologies. These technologies expand the boundaries of information and educational space for more efficient management of the educational process. Summarizing the results of the researches in this field the author identified and analyzed the subsystems of the university management.

To improve soil water regime and moisture supply of plants, moisture-swelling polymeric materials are used in the form of hydrogels, which, upon contact with water, rapidly absorb and retain it for a long time in its volume. However, widespread of such hydrogels used in plant growing is currently limited by its high cost. In this connection, from the economic point of view, the use of composite materials as soil conditioners is of great importance, including inexpensive natural raw materials in its composition while maintaining high rates of moisture sorption and water retention. The task is to improve the mixture to maintain the soil balance of various agricultural crops by changing the quantitative ratio of components, significantly cheaper the composition, improving its quality indicators. The purpose of the scientific article is the mixture for maintaining the soil balance of various agricultural crops, which contains an active product based on a granulated hydrogel and a targeted additive.

The article is focused on the professionalization of the civil servants’ activity and the role of the quality management of the advanced training and retraining of civil servants.

The article considers modern healthcare as a social institution representing a wide system of private and state enterprises. It is pointed out the need to study the theoretical and practical features of management in healthcare, conditioned by the need to develop conceptual approaches to communication between managers and specialists in the medical services industry at various levels of management.

Gellants are food additives used to increase the dencity and create a certain structure of the food product. In the dairy industry, there is an active work at developing new technologies for fermented milk products, which allows improving organoleptic quality indicators with the use of gellants. In this article, an analysis of the assortment of gellants used in the dairy industry was analyzed.

The presented work describes the concept of education of the XXI century, which is based on its quality and the leading role in culture and spirituality, education, in the implementation of innovations. It also points to such priorities as self-development and self-education, which are the basis of the modern educational paradigm. Organization of research activities of students is considered as a powerful innovative educational technology.

This article examines the state program for the development of education in the Republic of Kazakhstan based on the example of the Pavlodar region. A report is presented on the implementation of this program and the main problems are discussed. Priority directions of development and measures for their implementation are given.

The main provisions of the road quality management concept are outlined, as well as the tasks are defined that need to be solved in order to ensure the management of the system at three levels: strategic, tactical and operational.

Introduction of the quality management system is an important step for any production. Not only has the competitiveness of enterprise but also further successful development depends on the result of introduction of the quality management system and its proper functioning. Due to a quality management it is possible to obtain not only the improvement of structure of organization but also processes and their results quality. The aim of the article is to study the role of the quality management system in steady development of enterprise and problem of introduction of the quality management system in our country.

This article identifies the leading development trends of gender education at higher school of the post- Soviet Central Asian countries. Ones relate, firstly, to the legal and regulatory framework for the implementation of gender ideas at higher education. Secondly, trends are related to the conditions for organizing gender training. Thirdly, trends are manifested in scientific activity on gender studies at the universities of the CA countries.

The article is devoted to the current problem of quality control and safety of dairy products. The article provides a generalized description of the system models, discusses the main problems and advantages in implementing the quality control system in small and medium-sized dairy enterprises.

The article is devoted to risk analysis, methods of ensuring dairy products safety. Furthermore, the author dwells on such tool of quality control as a decision tree. The article presents the plan of HACCP for a diary enterprise on an example of the production a sour cream with 15-20 % of fat content.

The variants of the use of carbon as a heat-generating material in the agro-industrial complex are highlighted. This will significantly save energy, improve the environment, reduce the cost of operation, repair and maintenance of buildings and structures.

The article analyzes the system of development, design, storage and operation of normative and technical documentation in regional university. Measures are proposed to improve the quality control of normative and technical documentation, including a project to improve the quality control of technical documentation.

The article presents the characteristics of the main types of delicious-spicy plants and organoleptic properties of spices, which are of great importance in the modern world. The mechanisms of influence of tastyspicy plants on the body with therapeutic and preventive purposes, proven in the research work of foreign and domestic scientists, increase the effectiveness of their use in various fields of production, especially as food additives.

Аt present, dairy enterprises use a system for analyzing and monitoring critical control points, as well as a quality management system, to produce high-quality and safe products. These systems take into account factors that may affect the production process and other components by identifying hazards from the procurement of raw materials to the consumption of products for food. The purpose of the article is to study the role and necessity of applying quality and safety management systems at dairy enterprises and reducing the risk at all levels of production

The article describes the relationship of man as a species with nature. It is shown that this relationship is determined by the conditions of existence, the quality of air and water, the necessary elements of nutrition. It is also pointed to the role of environmental conditions-optimal for the body, determining human health and life expectancy

Non-governmental organizations cover a large part of the educational services market. Great demand for the educational services improvement and meeting the target groups’ special needs is calling for the regulating documents for NGOs to be developed. Regulating documents are to serve for the establishment of the consistent approach to the papers content and design, and to manage the independent education services quality evaluation routine.

This article discusses aspects of the impact of water quality on the organism of preschool children composed of hypotheses and scientifically proven facts. The features of water as a source of healthy lifestyle and rules for compliance with sanitary rules and norms of the Republic of Kazakhstan have been studied.

The article considers an important priority of the state policy of the Republic of Kazakhstan – the preservation and strengthening of public health. In the context of this problem, the quality of management of medical institutions plays an important role. In the context of the economic crisis in health care, it is necessary to increase the efficiency of medical institutions through the introduction of new forms, methods and models of management. Factors that make it difficult to manage health organizations can be divided into two groups according to the method of occurrence: environmental factors and internal environmental factors. Together, interacting with each other, these factors lead to inhibition of the development of modern medicine. Thus, it is possible to identify the main problems that arise in the management of medical institutions at the present stage: the fragmentation of underfunding, low level of confidence of Kazakh citizens in the health care system, the problems of quality and availability of medical services, the lack of highly qualified medical personnel, low managerial skills of heads of health organizations. Conclusions on improving the quality of health services are made.

In accordance with the law on education, the Republic of Kazakhstan guarantees the equality of the rights of all to receive a quality education, taking into account the intellectual development, psychophysiological and individual characteristics of each. The article is devoted to the analysis of the development of inclusive education, the problems on the path of introducing inclusive education are considered, the analysis of the experience of conducting an IT school in the framework of inclusive education is given. An attempt was made to identify factors contributing to the successful implementation of inclusive education methods.

The object of the study was water and bottom sediments of the lake Balkyldak of Pavlodar region, contaminated by mercury wastes.The purpose of the work is the creation of innovative cost-effective technologies for deep cleaning of aqueous media from mercury to the level of 1-10 parts per trillion, which will be tested for the cleaning of the lake Bylkyldak facilities in Pavlodar region.

This article discusses both the main and additional costs associated with the movement of goods from the manufacturer to the consumer. The tasks for achieving optimal efficiency in the activity of a commercial enterprise in modern economic conditions are defined. The analysis of the dynamics of the sales market of the studied enterprise is carried out. Both positive and negative aspects of the trading enterprise are revealed.

Various methods and approaches in teaching foreign languages are gaining popularity in the modern world of globalization and integration. The integration of the education system caused by the acceleration of the process of mastering foreign languages and increasing its quality, in this regard, this article discusses the latest world teaching methods in order to implement them in the educational system of educational institutions. In particular, in the modern educational environment, the approach based on the idea of integrating subject and language learning in the process of professional training of future specialists (Content and Language Integrated Learning) is of particular importance, which contributes to the formation of professionally-oriented competence in a foreign language. In this regard, the article presents the methodology for activating the knowledge and skills of students in lectures, practical training and during independent work of students on the example of the discipline “Economics and entrepreneurship in industry” for students of non-linguistic directions of training in accordance with the methodology of content and language integrated learning (CLIL). The methods of applying the “Language input theory”, “Second language acquisition” theory, “Interaction theory” in lectures, practical training and during independent work of students in the discipline “Economics and entrepreneurship in industry” are also proposed. A practical algorithm of the course of the lesson (on the example of lectures) in accordance with the CLIL methodology according to the specifics of the discipline is presented. The methodology of evaluating students’ knowledge in accordance with the credit technology of training is presented. In the article, special attention is paid to the auxiliary role of the teacher in helping students master the materials of the discipline, which is reduced as the student acquires basic professional knowledge and skills. This emphasizes the auxiliary role of the teacher at the first stages of training (acquaintance, introduction, training, including independent analysis and evaluation of data while learning a foreign language), followed by independent training of students

The article discusses various aspects of project management, which is one of the most effective tools and allows you to skillfully take into account various factors, as a result of which the reliability of implementing successful changes and achieving goals in all types of professional activities increases. In Kazakhstan, project management dates back to the 1990s, but the real practical application of this management tool is observed at the beginning of this century. According to the authors, one of the key problems of widespread implementation and use of the project approach in the private and public sectors is the lack of information and methodological support for the development of this area. The purpose of this study is to systematize the theoretical and methodological aspects of project management in the context of improving the quality and efficiency of economic decisions. Any project is a change that is caused by the creation of innovations and the corresponding investment and other resources, on the one hand, and on the other hand, is implemented in conditions of high uncertainty and risks. The research uses the following methods: comparative analysis, a systematic approach based on which General and specific features of project management are identified, as well as abstract-logical. In the context of globalization, modern management principles require a team approach to solve problems aimed at achieving the strategic goals of companies, organizations and States, as well as ensuring continuous improvement of business processes, implementing any changes of a socio-economic, organizational or other nature. The processes that ensure an effective transition to project technologies, as well as important components of the project approach from the point of view of achieving project goals are identified. It is shown that project management is especially widely used in private companies. Currently, this tool is being actively implemented in the management system of state structures in different countries. The significance of the research results lies in the fact that knowledge about the project approach is generally recognized scientific direction, which is characterized as an independent sphere of professional activity and a system of lean management aimed at improving the economic efficiency of implemented projects. In General, despite the noticeable activation of project management promotion processes in Kazakhstan, it should be noted that an important task is to transfer modern technologies of the project approach as a tool for innovative development to all spheres of life of the Kazakh society.

The main problem: In modern conditions, the development of the student entrepreneurial community, the formation of entrepreneurial skills, support and promotion of start-up projects and ideas increase the competitiveness of future graduates and give them the opportunity to realize their creative and entrepreneurial potential. According to the authors, the implementation of policies in the field of entrepreneurial education, the development of an entrepreneurial ecosystem and entrepreneurial thinking requires the exchange of experience and the study of new approaches and methods of working with students. Therefore, the article discusses the main areas of activity of the Innovative University of Eurasia and the Old Dominion University (USA) for the development of the entrepreneurial community. Purpose: To consider the process of organizing training in the direction of "Entrepreneurship" and to present the opinions of the authors in this direction. Methods: The work used theoretical, experimental, methodological, descriptive and analytical research methods. Results and their significance: The authors conclude that the educational trajectory in the direction of "Entrepreneurship" contributes to the formation of graduates of a new formation, with an active life position, which affects the development of human potential. The role of universities in the development of the entrepreneurial community lies in the implementation of educational activities with an emphasis on developing students' entrepreneurial skills in the process of their education, in improving the quality of education, and developing new forms and methods. Participation in joint projects to build an entrepreneurial community expands the boundaries of internationalization of higher education. Therefore, in this article, the authors try to convey their approaches and methods of work on the formation of the student entrepreneurial community as an important component of the system of entrepreneurial education.

The article describes the results of a study of the effectiveness of the standards being implemented in railway transport. A general view of efficiency and standardization was analyzed. It was studied which document regulates the application of standardization in the Republic of Kazakhstan. Further, the international railway standard IRIS «International Railway Industry Standard» was taken as a basis, which, in turn, is based on the international standard ISO 9001. A study of the methods and types of effectiveness of standards was carried out, as well as an analysis of the applied international standard in the field of railway transport IRIS. The purpose of this standard is to create a business management system that allows for continual improvement, with an emphasis on preventing and reducing delivery defects. It is important to note that the effectiveness of standardization is evidenced by examples showing that ignoring standards turns out to be huge losses for a company for a number of reasons, for example, because its products have not been certified for compliance with a specific standard; due to the additional costs of the company for reworking products that are not manufactured in accordance with the requirements of the standards in the country of export. An analysis of the effectiveness of standardization work in the railway industry can be expressed in relative terms of the effects obtained as a result of the application of the standard: for example, in an increase in the level of safety or in economic growth. The basis for determining the actual effect is the actual level of production that existed at the given enterprise before the introduction of the standard. The measures that can be applied in order to increase the efficiency of solving the problems of developing standardization in the field of railway transport have been studied. Such standardization as one of the elements of technical regulation can provide a contribution to economic growth in excess of the corresponding indicators from the introduction of patents and licenses.

The article is devoted to the mathematical modulation of a complex of experimental data obtained in the process of experimental studies of processed cheese products, processed by mathematical methods. The purpose of this study is to establish the type and amount of the melting salt that promotes the formation of the plastic structure of the processed cheese product. The analysis of scientific research in the field of food technologies showed that mathematical modeling is used in the following areas: clarification of the modes of technological processes, design of recipes and assessment of the quality of finished products, as well as forecasting the shelf life of new products when they are put into production. The most relevant in describing the processes of food production are models of multivariate variance-regression analysis using methods of mathematical planning of the experiment. The authors carried out mathematical modeling and established graphical dependencies characterizing the degree of influence of the regulated factors X1 and X2 on the controlled ones that determine the quality and safety of processed cheese products. It is important that the mathematical analysis of the graphical dependences of the rheological parameters on the adjustable factors indicates the reliability of the data obtained. It is concluded that an increase in the melting salt dose leads to an increase in the – limit shear stress, which reflects the nature and state of the consistency of the processed cheese product. The process of normalization of the controlled factors by the maximum value was carried out. Graphical dependencies were built and regression analysis was performed, the results of which allow an objective assessment of the degree of influence of the type and dose of the melting salt on the chemical and organoleptic characteristics of the test products. The authors have proven that the optimal efficiency of transforming the structure of the constituent components of the recipe into a plastic structure of a processed cheese product that is stable during storage is provided by a combination of adjustable factors X1 (Solva 85) and X2 (Solva 120) taken in a ratio of 1: 1, with a total amount of 1,2 mas.%. At the same time, the quality indicators of the experimental products are characterized by the following values of the controlled factors: У1 – 1280 Pa; У2 – 9 points, У3 – 9,301 (2,0-2,2109 colony forming units /g).

The work is intended to determine the etiopathogenetic principles of animal prevention in gynecological pathology and issue a theoretical justification. At the same time, improving preventive measures aimed at preserving their health, increasing the productivity of animals in modern conditions of animal husbandry and ensuring high productivity of cows. In this regard, the main task is to develop ways to increase insemination of cows with the use of complex and homeopathic treatment. For the first time in the East Kazakhstan region, new scientific data on the main etiological factors leading to gynecological pathology and infertility of cows were obtained. Work has been carried out to improve measures aimed at preventing infertility of cows in the conditions of dairy farming in this region and stimulating increased insemination. New schemes for stimulating increased insemination using hormonal, homeopathic and other drugs have been tested. As a result, an increase in the productivity of cows was revealed, and stimulation schemes were introduced. For the first time in the farm" kamyshinskoye" an economic assessment of the damage from infertility of cows is given. Research work is done between 2016 and 2019 years by the Department of veterinary medicine of the State University named after Shakarim, in the laboratory "Agrotechnopark" of the State University named after Shakarim and national University of veterinary medicine and biotechnology named after Lviv and in the farm "kamyshinskoye" of the Shemonaikha district of East Kazakhstan region. To enhance the insemination of cows 3 groups of animals was obtained: animals of group I were not subjected to insemination; animals of group II for 1-3 hours before insemination grafted surfagon 3 ml (15 mg), 15 ml of Catosal, 15 ml habilita-Se, 10 ml uteroton; 8 days prior to insemination progesterone 2,5% 2 ml, Catosal 15 ml, habilita-Se 15 ml; cows of group III for 30-60 minutes before insemination were given Ovariovitis, and after fertilization Ovariovitis for 25-30 days and liarcine 5 ml. According to the results of drawings based on complex and homeopathic preparations, low costs were shown.

Main problem: Presence of acidic chemicals such as carbon dioxide and hydrogen sulphide, composition of production fluids triggers corrosion. Corrosion in oil and gas industry leads to deterioration of equipment since most of equipment is made of metal alloys. Application of inhibitors is one of the corrosion mitigation methods that needs to be controlled because it is important to identify optimal concentration of the chemicals in production fluids.Residual chemical analysis plays an important rolein identifying the appropriate dosage of corrosion inhibitors and its correction. It is imperative to find the most optimal concentration of amines due to the fact that both overdose and underdose could lead to equipment deterioration. The chemical analysis is hindered by complexity of mixtures that are applied in petroleum industry. Purpose: The main purpose of this article is to find out the most effective method of residual chemical analysis for inhibitors used against sweet and sour corrosion by studying and analyzing corresponding literature review. The analysis should be carried out with robust, sensitive, and accurate instrumentation. Methods :Theoretical study of composition and mechanism of amines used in oil and gas industry as corrosion inhibitors and selection of appropriate instrumental analytical techniques for the residual analysis. Results and their importance: After careful studying and consideration of modern instrumental analytical techniques the most optimal and efficient method in terms of robustness, time saving and cost was selected. Ion chromatography is an adequate method to carry out residual chemical analysis for amines that are used as inhibitors in oil and gas industry to prevent sweet and sour corrosion.

Main problem: The article examines promising directions in the production of fortified food products in Kazakhstan and Russia. The authors carried out an analytical review of the current state of production of fortified bakery products on the territory of the Russian Federation and the Republic of Kazakhstan. Anemia has been described as one of the most common consequences of micronutrient deficiencies. The problems associated with anemia lead to serious complications for the health and well-being of people. Lack of folic acid and vitamins in the diet is the cause of cardiovascular disease, maternal and child mortality. Purpose: The article considers the problem of significant deviations in nutrition of almost all groups of the population of Russia and Kazakhstan, regardless of lifestyle, habits or income level, which have an extremely negative effect on the health of the nation: the average life expectancy decreases, the productivity of the working-age population and resistance to diseases decrease. Methods: Based on the studied domestic and foreign technical literature, patent information, an analytical review of the current state and prospects of the production of fortified food products in the Russian Federation and the Republic of Kazakhstan was carried out. Results and their significance: The authors have shown that food fortification is the practice of purposefully increasing the content of vitamins and microelements in food to improve the nutritional quality of food and have a positive effect on human health. The authors considered the question of how the problem of micronutrient deficiency, including iron, is currently being effectively solved in many countries by enriching food products of mass consumption with vitamins and minerals.

The article examines the state and directions of development of modern Kazakh lexicography. The goals, objectives and possibilities of modern branches of lexicography are determined; the scientific-theoretical and practical foundations of compiling dictionaries are described. The development of the theory and practice of lexicography is due to such needs as the recognition of lexicography as a separate area of linguistics, the development of a theoretical basis for the creation of dictionaries, a general typology of dictionaries, the definition of the macro - and microstructure of dictionaries. Therefore, the purpose of this article is to summarize the experience of Kazakh lexicography, to identify its general theoretical problems, directions of development, to show its place in linguistic science. The study used a descriptive method, analysis and synthesis methods. A brief overview of scientific works is made, which study general theoretical and practical problems of Kazakh lexicography, research on the history of Kazakh lexicography, as well as works that consider the experience and scientific foundations of compiling dictionaries. The authors note the importance of the theory of lexicography in creating dictionaries, improving their quality, choosing the basic principles when sorting vocabulary units in a dictionary, the peculiarities of their functioning, the quantitative and qualitative composition of linguistic units to be included in the corresponding type of dictionary according to the subject of research, denote the theoretical and practical problems of Kazakh lexicography, scientific and theoretical foundations for creating dictionaries of the Kazakh language, determine the scientific, theoretical and practically applied aspects of modern lexicography as a science of language. Pointing to the importance of studying the scientific foundations of compiling dictionaries, their composition and structural features, both from a purely scientific point of view, and from the point of view of the implementation of state programs aimed at the development of the Kazakh language, the authors of the article conclude that the patterns and quality of compiling dictionaries directly depend on the basic functions of the language in modern society. The state of affairs in modern lexicography makes it possible to talk about the allocation of general lexicography, which studies the properties inherent in any dictionary, and particular sections of lexicography (educational, terminological, onomastic, etc.). General lexicography should establish common (or statistically dominant) features of all dictionaries using typology, as well as explore the general patterns of functioning and use of dictionaries. Private lexicography should contain sections that study the internal structure of this type of dictionary and methods for its creation; history of this type of dictionary; purpose and addressee of this type of dictionary. Therefore, experts in the field of lexicography believe that the prospects for the further development of lexicography are seen in the improvement of existing and creation of new types of dictionaries, the emergence of complex dictionaries and the computerization of lexicographic activities.

Main problem: the organization of anti-doping education of students assumes the presence of a specialized discipline "Fundamentals of anti-doping support" and the inclusion of anti-doping topics in classical disciplines. The formation of a number of competencies in the field of anti-doping education requires new interactive forms of organization of activities that take place in the development of both disciplines of the medical and biological cycle, as well as sports, pedagogical and social disciplines. A conscious perception of the industry problems associated with the use of doping in sports and the health of the nation provides knowledge of chemistry, biochemistry, physiology, sports medicine. Purpose: study of the organization of the educational process for anti-doping support in a sports university. Methods: today, the main methodological innovations are associated with the use of interactive learning technologies. The learning process, based on the use of interactive teaching methods, is organized taking into account the inclusion of all participants in the learning process. An educational communication environment is created, which is characterized by openness, interaction of participants, equality of their arguments, accumulation of joint knowledge, and the possibility of mutual evaluation. The organization of the educational process on anti-doping support for InEU students assumes the presence in the educational program of a specialized discipline "Fundamentals of anti-doping Support" and the introduction of components of anti-doping education in already established disciplines. Results and their significance: the organization of the educational process on anti-doping support for InEU students assumes the presence of a specialized discipline "Fundamentals of anti-doping Support" in Educaional Program and the inclusion of components of anti-doping education in the formed disciplines.

The widespread introduction of information technologies makes significant changes in various spheres of human activity. The education sector is no exception. In this regard, in this article, the author considers the actual problem of developing electronic textbooks and is one of the most relevant and promising areas of informatization of the educational process. The analysis of the works of scientists A.A. Andreev, A.I. Bashmakov, T.I. Koval, V.M. Kukharenko, E.S. Polat, P.I. Serdyukov, S.S. Sysoeva, A.Yu. Uvarova was conducted. These works contain requirements for the development of electronic textbooks. Based on the results of the analysis, the author described the stages of developing electronic textbooks, the principles that they should correspond to, and also provided a list of modules that should make up an electronic textbook. From the existing variety of software packages, the author distinguishes CourseLab, Smart Builder, MOS Solo, Google Sites, iSpring Suite, TurboSite, Adobe Animate, HTML5. The development of electronic textbooks based on the technology presented by the author of the article and their subsequent application in the educational process will help to organize the educational and cognitive activities of students at a more effective level. Purpose is the description of the technology for the development of electronic textbooks, taking into account existing requirements. The article uses methods of analysis, synthesis and deduction. The analysis of requirements and principles of development of electronic textbooks is carried out on the basis of the descriptive-analytical method. The practical result of the proposed technology is the developed electronic textbook "Development of mobile applications". The results of the study, in addition to their theoretical significance, also have practical significance, which consists in the positive dynamics in resolving the contradiction between the continuously increasing flow of information and the limited opportunities of students to assimilate it. The conscious use of electronic textbooks in the educational process is one of the fundamental ways to improve the quality of education by changing the methods of teaching used in the direction of individualization and focus on the student.

The article describes modern pedagogical technologies of teaching a foreign language in primary school and examines their impact on the development of various competencies of primary school students. The authors emphasize that information and communication pedagogical technologies help to implement a student-centered approach to learning, provide individualization and differentiation of learning, taking into account the abilities of younger students, their level of education. And also modern pedagogical technologies as a systemic holistic means of restructuring activities make it possible to improve the quality of the educational process, to solve the problems of personality development. Purpose – analysis of modern educational technologies used in English lessons. The current system of training primary school teachers requires a revision of its structure, organization, relationship with school practice and innovative processes in the education system. Therefore, the article proves that an important part of the educational process should be the use of new pedagogical technologies in improving the quality of training of specialists at the university, providing the possibility of self-development of the teacher's personality, increasing his creative abilities and improving the educational process. The study used a descriptive method, analysis and synthesis methods. The authors of the article call the development of the student's personality (moral and cognitive) and the complex of abilities for successful interaction with the polycultural and multilingual world around him as the goal of foreign language education in primary grades. Therefore, it is important that the future primary school teacher, in accordance with the requirements of the state educational standard, has formed the knowledge, skills and abilities necessary for the application of modern pedagogical technologies. At the present time, when a new education system was created, focused on the world educational space, changes in the educational process changed the paradigm of education, updated the content of education, formed a new approach, new relationships. Keywords: technologies, competencies, multicultural, multilingual, English, modern education.

The COVID-19 coronavirus pandemic has brought about a new economic reality, to which every economic entity must adapt, regardless of the scale: within a region, a country, or the whole world. The article examines the regional economic mechanism in the context of the pandemic in the context of the interaction of the market mechanism of self-development and the control influence of the regional authorities. The destabilization of the economic situation in the regions as a result of the pandemic and related restrictions poses the problem of revising the main directions of regional policy To achieve the set goals and objectives, the general methods of empirical and theoretical research were used: analysis, synthesis, induction, deduction, generalization, description. Three spheres play a key role in the economy of Pavlodar region: industry, trade and transport. Just how to remain positive dynamics in terms of industrial production and maintained the services will depend on the development of the region, the main indicators which are discussed in this article through the prism of the events in the context of the pandemic. The necessary health measures taken in response to the pandemic have led to a severe reduction in mobility and are accompanied by high economic costs. The quarantine measures have had a direct impact on businesses, especially microbusinesses. To support this sector, tax incentives were provided, lending was expanded, and measures were taken to further facilitate the business environment. The article reflects only a small list of issues that required changes in the economic mechanism in the context of the pandemic and the introduction of restrictive measures, as well as the strengthening of the influence of external control on the economy. At the same time, the state as whole and individual regions, taking into account their potential and the actual situation in the economy, need to find an optimal balance between the prohibitions and restrictions imposed to ensure the safety of human health and the preservation of the economy in a functional mode, work and income of employees. This problem of finding a balance between prohibitive and permissive measures requires further analysis. At the same time, the state needs to develop and apply tools of a systematic nature, focused on the long term.

Main problem: Issues of evaluating regional competitiveness, search for competitive territories’ advantages, especially by improving human resources’ quality, remain insufficiently studied. In this regard, in article it is presented existing models for evaluating regional competitiveness in Kazakhstan economy. In addition, in article authors carried out regional classification according to analysis of main socio-economic indicators of Kazakhstan regions, originating in Concept of regional policy. Authors calculated main indicators of Kazakhstan regions’ competitiveness with aim of determining level of region’s competitiveness in comparative perspective. Purpose: Purpose of the research is comparative analysis and evaluation of the competitiveness of Kazakhstan’s regions in modern conditions. Methods: The article uses rating model for evaluating competitiveness of Kazakhstan’s regions based on indices, developed by Agency for research on investment profitability, operating at National chamber of Entrepreneurs of Kazakhstan (rating of competitiveness of Kazakhstan’s regions). Results and their value: Value of the paper considered in that classification of regions is carried out according to analysis of main socio-economic indicators of Kazakhstan regions, which originates in Concept of regional policy. The authors also calculated main indicators of competitiveness index of Kazakhstan regions according to National chamber of Entrepreneurs of Kazakhstan in order to determine the specifics of regions and identify directions for developing regional strategies. Based on results of the study, analysis was carried out that allowed to reveal strengths and weaknesses of regions of Kazakhstan. It is emphasized that a high level of regional competitiveness cannot be achieved without development of human resources and their rational use. In general, directions of regional policy are determined by chosen development scenario. The approach proposed by authors to methodology for evaluating regional competitiveness has a number of advantages - it reflects the specifics of regions, allows seeing the nearest competitors and determining directions of the region’s development strategy.

The data of calculating the actual cost of production are widely used in production management at industrial enterprises, to monitor compliance with the standard cost of production adopted by the enterprise, to identify ways to optimize labor costs and material resources. The level of cost depends on the activity of an industrial enterprise in a market economy: the amount of profitability, the economic efficiency of its activities. The choice of the method of cost accounting and calculating the cost of production depends on the specifics of the technology and organization of production, as well as the requirements of the efficiency of enterprise management. Studying the formation of accounting information when calculating the cost of production by type of product, comparing the level of costs with the revenue received makes it possible to determine the economic efficiency of production. The purpose of this study is to identify the problems of forming accounting information when calculating the cost of production for making decisions to reduce costs. The implementation of the research goal is facilitated by the use of methods of comparative analysis, synthesis, and graphical method for visualizing the results obtained. When considering the cost calculation, attention is paid to the fact that in market conditions there is a need for detailed cost accounting and calculation of the cost of production. If we take into account that in market conditions, prices for products are formed as demand increases, and demand is influenced by external factors, then we can only influence the costs based on the cost calculation. The basis for making effective management decisions will depend on how reliable and to what extent the accounting information is formed. Costs are the main constraint on the profit of industrial enterprises, since the main strategic goal of any enterprise is the mechanism for increasing profits. The ability to achieve this goal is limited by the following internal factors: the complexity of the cost grouping, technological processes, and the impact on product quality. It is necessary to improve the information system, which is based on the data of primary documents, document flow and the order of cost grouping. The proposed measures will contribute to strengthening the control function of the management and, as a result, effective cost management.

The progress of work on the creation of an "intelligent transport system" in Kazakhstan, the development and modernization of the road industry will be reported. The economic and social effectiveness of several transport corridors and new projects were analyzed. Transport corridors of foreign countries, methods of providing logistics services were presented. In his address, the head of state paid special attention to the issues of digitalization of all spheres of life of the population, including the transport sector of Kazakhstan. Currently, the Ministry of investment and development of the Republic of Kazakhstan is working on the creation of an "intelligent transport system" within the framework of the state program «Digital Kazakhstan» (ITS). ITS goal is to systematically integrate transport infrastructure, transport devices and users with modern information and communication technologies aimed at improving the safety and efficiency of the transport process. The concept will include 11 components in ITS. One of them is a special automated measuring instruments (UAVs), which are installed in the main automobile corridors. This device is designed to measure moving vehicles without contact and eliminate unjustified stops. This year, it is planned to put into operation 10 units of RSPP, and by 2020 it is planned to increase their number to 46 units. It is also planned to introduce a traffic management system that will inform drivers about the situation on the roads, a system for forecasting and analyzing climatic conditions, which is carried out through a network of weather stations along the roads, a network of video monitoring and special video cameras for detecting traffic violations, toll road systems that cover the cost of maintenance of the national road network, etc. They will be introduced in stages until 2021. The implementation of this project will reduce road deaths, increase the volume of transit traffic and the speed of logistics services, fully cover the main highways with measuring instruments and create favorable conditions for drivers on the roads. Such systems are already operating in South Korea, Japan, Australia, Europe and the United States.

The main task of microbiological study of pulmonary patients is to identify the etiology of acute and exacerbation of chronic disease in order to determine therapy and control its effectiveness. Classical methods of microbiological research consist in isolating a pure culture of the causative agent of the disease with its identification by biochemical, antigenic and other characteristics. Such studies are multistage; they impose rather strict requirements on the quality of the source material, the timing and conditions of its transportation, laboratory equipment and the precise execution of the research methodology for at least 3-5 days. Isolation of the culture of a number of pathogens (atypical intracellular microflora, anaerobic bacteria, mycobacterium tuberculosis) requires even more lengthy studies using special media and equipment. This article presents the results of a bacteriological study of pathogenic microflora in diseases of the respiratory system of the population of the Shcherbakty district of Pavlodar region for 2017-2019, including the following sequence: microscopy of native and Gram stained smears; inoculation of biological material on nutrient media for isolation and identification of the pathogen; determination of the sensitivity of the isolated microorganism to antibiotics; immunological (serological) research methods aimed at determining antigens of microbiological origin, as well as antibodies to them in the patient's body. It has been shown that conducting bacteriological studies in accordance with the requirements of regulatory documents allows obtaining reliable and comparable results necessary both for the optimal treatment of patients and for collecting and analyzing data on monitoring the emergence and spread of diseases of the respiratory system caused by pathogenic microflora.

Today, there is a full development of the food industry. It is characterized by the widest mechanization and automation of production and transport processes, the use of artificial cold and vacuum technology, the latest physical methods, chemical and biological preparations to accelerate technological processes. There are a huge variety of new products. New ways of long-term preservation of products in hermetic airtight packaging are promising. Now it is possible to deliver products from almost any industry to anywhere in the world. But the main problem for the modern consumer is that today's food industry is moving by leaps and bounds in the application and addition of chemical food additives: preservatives, flavors, dyes, stabilizers, antioxidants and substitutes for raw materials. To correctly answer the question of how to treat the use of food with food additives, it is necessary to understand and weigh the main disadvantages and advantages of using them. Advantages are that the product is better preserved, has an attractive appearance. Disadvantages are that the human body wears out, processing various chemicals, it is harmful to health. And with certain doses of use it becomes dangerous. Everyone has their own attitude to their health and their own priorities in life. Many people have come to terms with the daily use of products with additives, but others consciously refuse almost everything in the store. But the fact that no one wants to be poisoned from an overdose of various chemicals or starve to death. Therefore, the main advice is to carefully study the composition indicated on the label of food products and know the measure of their consumption. It is also impossible to believe blindly that the label was written with the truth. Manufacturers often use additives literally visually, which can lead to the production of a product with a dangerously higher concentration. It also happens that the manufacturer intentionally exceeds the norm in order to hide the shortcomings of the product (stale, poor quality of raw materials) and increase the yield of the finished product. The food additives added to many foods (usually designated by the code E) are predominantly harmful to the body. With moderate consumption, the use of products with E-supplements is not too harmful to the body (for example, several times a month). The situation is dangerous when a person consumes products with a large number of food additives daily or even several times a day when using various products. Nowadays, there are several hundred food additives with the code E (from E100 to E1521).

The main problem of the article discusses the methods of developing a collection of casual clothing with elements of ethnic style, using the example of innovative technologies in the field of creating ornaments for clothing. Factors of formation of ornaments based on the structure of the human body are justified. The author considers the factors of shaping, based on special visual features of clothing in connection with ergonomic factors. Study of the specifics of ornamental motifs to transform them into a component of modern youth clothing. The authors of the article monitored the environmental approach, that is, the acquisition of knowledge about cultural values based on the selection of all the best that was created by the people, introduction to cultural folk traditions, dialogue between man and culture. When writing the article, we used author's and experimental research methods, fixing information in tables and author's sketches. The study of categories and definitions was carried out by the method of selecting and classifying information, as well as its analysis. Comparative analysis of forms of traditional and modern culture, study of bibliographies on architecture, art, philosophy, psychology; analysis of materials of scientific monographs, abstracts and dissertations, articles, creative essays of masters of architecture and art, from the point of view of the concepts, principles, conceptual and terminological formulations contained in them. In addition, private scientific methods are used: analysis of literary sources to identify current trends in the formation of art. Аs the results of the research, a collection has been developed that considers various types of clothing decoration, uses methods for including ornaments in the structural structure of the costume and provides models, calculations and drawings. The author's collection justifies the use of ornaments in connection with the selected artistic and figurative task of the collection, as well as in connection with its functional purpose. All these factors are formative. And the practical experience of this research shows the relevance of this topic in connection with the need not only to promote the historical achievements of Kazakhstan's culture to the masses and popularize them, but also as a method that helps to understand the possibilities of its translation into modern design objects. Keywords: ornament, youth, model, collection, Kazakhstan.

In the Republic of Kazakhstan a market economy, a democratic political system and a free civil society based on ideological, social and political pluralism are developing. This contributes to the development of constitutional norms and the diversity of new legal institutions that ensure the supremacy of the Constitution. These include the constitutional Council. In 2020, it's been twenty-five years from the date of adoption of the Constitution of the Republic of Kazakhstan and the creation of the constitutional Council of the Republic of Kazakhstan, ensuring the supremacy of the Constitution throughout the territory of the Republic. The constitutional Council of the Republic of Kazakhstan is not part of any of the three branches of government and is subject only to the Constitution of the Republic of Kazakhstan and the law. The purpose of this article is a comprehensive analysis of theoretical and practical issues of interaction between the constitutional Council of the Republic of Kazakhstan and other institutions of state power. In this regard, the article contains the results of the analysis of the foundations of the constitutional system of the Republic; constitutional supervision of the prosecutor's office; the institution, functions and instruments of power of the President, mechanisms of interaction of the Constitutional Council as a constitutional supervisory body with the President of the Republic of Kazakhstan, the Parliament of the Republic of Kazakhstan and the Government of the Republic of Kazakhstan. A comprehensive study of the activities of the constitutional Council of the Republic of Kazakhstan on the constitutionalization of current legislation is one of the current theoretical and practical problems. It is determined by the scale and quality of the current legislation adopted during the period of fundamental social reforms, the need to «correct» and improve it. In this regard, a significant role is assigned to the Constitutional Council, whose activities are subject to scientific analysis and reflection. In addition, the authors studied and revealed the line of interaction of the constitutional Council and other government institutions are considered in the areas of initiation of constitutional proceedings in the Council, organisational, legal, information procedures, determine the composition of the constitutional Council, overcoming the objections of the President to the constitutional Council's decision. The institutional method used in the article made it possible to show the essence and significance of the constitutional Council in the system of state authorities

The article reveals the dynamics of grain production in the Republic of Kazakhstan, grain exports by countries. The author analyzes the grain market (sown area, yield, gross harvest). Kazakhstan has a significant potential for grain exports. Grain exports are important for the country's economy. The country is one of the six largest grain exporters in the world. This is due to the high milling properties of Kazakh grain, the quality indicators of Kazakh flour are highly valued in many countries of the world, which allows Kazakh wheat to be competitive in the world market and provide markets in various countries of the world. The main export destinations are Uzbekistan, Afghanistan and Tajikistan. The article analyzes the main trends in the development of the grain market and gives an assessment of the state.

In the article, the object of research is the telecommunications industry of the info communication services market of the Republic of Kazakhstan. Despite the fact that the structure of the communications and telecommunications market of the republic has changed significantly for the better in recent years, the development of various segments of the industry has diverse regularities that form quite definite trends that determine the prospect of their development. In this regard, the aim of the research was the analysis of the state of the telecommunications industry of Kazakhstan, identification of the main players in the industry, identification of tendencies and regularities of development of its segments. As a scientific tool for solving the problem set in the article, a set of methods of statistical and analytical analysis was used, on the basis of which the main provisions of the analysis, problems and tendencies of development are justified and illustrated. It should be noted that the market of information and communication services of the Republic of Kazakhstan is characterized by a state presence, the essence of which is manifested both in the use of tools that form structural and technological shifts in the development of market industries, and support for its development in priority areas that determine the competitiveness of the market of the state, as a whole. One of these tools in the development of the information and communication sector of the Republic of Kazakhstan is the state program “Digital Kazakhstan”. The development of the market is accompanied by the emergence of new players in it from the technology sector, and as a result, increase of the competition for consumer through the expansion of the range of services, improving their quality and pricing policy. As a result of competition, a pool of leading operators has been formed in the sphere of telecommunications services in the republic, whose activity already go beyond the national framework. At the same time, the infrastructure of the industry, which is characterized by the dominance of analog data transmission system and the underdevelopment of digital and satellite infrastructure, still needs to be improved. Taking into account the forecasts of rapid growth in the near future in the global market of mobile telecommunications services, this will require both from operators and from the state, in general, modernization of the existing telecommunications infrastructure, as one of the important factors of Kazakhstan’s entry into the global information space.

The article presents the results of implementing a quality management system at the enterprise. The study and analysis of the international standard ISO 9001:2015, as well as sanitary and epidemiological requirements for production control were carried out. The main requirements and rules for the implementation of input, operational and output control of products at enterprises at all stages of the product life cycle were identified and presented. In addition, it was determined what requirements must be met by enterprises to implement a quality management system. It is important to note that this work is necessary at the enterprise, as it has the following advantages: by improving product quality, product sales increase, the level of management of the enterprise and personnel increases, and cost savings are realized at the stages of development, production and operation. It follows that to implement a quality management system, it is necessary to set the following tasks: describe the company's processes, develop performance criteria and evaluate processes, develop the necessary documented information, implement documentation in all departments, familiarize them with the quality policy and goals, conduct timely internal audits for further SWOT analysis, and conduct an assessment by an external auditor in order to obtain a certificate of compliance. An important step in quality management is that the organization should not eliminate nonconforming results of processes, but should identify potential nonconformities, assess the risk with the preparation of a Protocol, plan and implement actions to reduce risks. Difficulties may arise: lack of understanding by the staff of the need to implement a quality management system, lack of a clear vision, mission, lack of complete information on processes, lack of quantitative and qualitative evaluation criteria, quality is defined as the quality of products, not as the quality of processes, resources, lack of monitoring of customer satisfaction. It is possible to overcome these difficulties only with the implementation of the quality management system according to ISO 9001, since the requirements prescribed in the international standard are a real tool for improving the efficiency of the enterprise, which will help bring the organization to a higher level of development.

This article reveals the essence of teaching the disciplines of the natural science cycle in English in high school. When preparing for the lesson, there is a need for careful selection of educational material, the teacher thinks out a specific algorithm for working with the text in a foreign language using subject terminology, while not forgetting the basic grammatical and syntactic models characteristic of the English language. In such a language environment, foreign speakers actively acquire solid knowledge, eliminating language difficulties in professionally-oriented lessons. Given this problem, we decided to create a methodological guide for teachers, which will contain tasks for formative assessment in physics lessons in English. Its lexical and grammatical material meets the requirements for mastering the English language (B1) in educational and cognitive activities. The presented progress tests also meet all the requirements of the corresponding stage of training of non-native speakers and help to consolidate the skills of professionally oriented communication. The purpose is to reveal some principles that should be taken into account when preparing assignments for physics lessons in English, as well as to provide a methodological guide for teachers. This article shows several principles that are most effective when conducting lessons. All the data of the article was confirmed by a computer survey of students, the answers were analyzed and collected for publication. Given the results we have presented, secondary school teachers can improve the quality of the material provided, as well as spend less time preparing for lessons. Physics is one of the fundamental sciences that can combine both the subject content and the language component. Here we present various methods of subject-language integration to improve communication skills. Thus, the preparation and conduct of physics lessons in English requires a strict and careful selection of educational material and takes into account the educational profile of secondary school students.

Main problem: In the 18th century, when industrial production began, the use of steam and mechanized production caused major changes in the economy. As a result, production costs decreased along with an increase in the quantity and quality of products. During this period, production underwent a revolutionary transition from manual labor to mechanization. The potential impact of Industry 4.0 on labor markets remains an under-explored scientific field. It is estimated that Industry 4.0 will lead to unemployment by changing the employment structure and will bring new structural problems in terms of unemployment and labor relations. Purpose: The purpose of the study was to establish the impact of Industry 4.0 on the labor market and identify the consequences of the impact. Methods: studied, the evolution of production development, when mass production with electricity led to the Age of Industry 2.0, and then the emergence of the digital revolution, the use of electronics and information technology in production processes, marked the beginning of the Age of Industry 3.0. It is expected, according to international experts, scientists, that automation and robotic production will have a serious impact on the unskilled workforce and cause a critical reduction in the labor force of vulnerable sectors of society, that is, women, migrants, youth and the elderly. Results and their significance: This study assessed the possible impact of the fourth industrial revolution on labor markets. Through a literature review and analysis of emerging trends in Industry 4.0, the risks, opportunities and challenges of the process are explored in a comparative perspective. It has been established that countries must correctly perceive the transformation of labor markets and take appropriate measures. Otherwise, the applied labor-based low-cost industrialization model will lose its comparative advantage

In the conditions of modern economy, factors that affect the security of the business, but relate to external resources in relation to the company or opportunities, become significant. These resources and opportunities in economics have traditionally been identified with macro-economic (economic growth, inflation, exchange rates, government support) and institutional parameters (regulatory framework, transaction costs). The influence of the quality of economic space on economic security of business through the evaluation of opportunities that are tied to the specifics of the economic space is the least researched, including in our country. In this case, according to the latest research in the field of economic geography, economic space acts as a structure-forming platform that can form local markets, with intensive interaction of business agents. The purpose of this study is ensuring of economic security by building business networks in a single economic space. The research area focuses on indicators that characterize economic space, which are successfully used in international practice to determine the quality of economic space. The realization of this approach requires the use of traditional methods of scientific research, such as analysis, comparison, graphical method for visualizing obtained results, which allows determining the agglomeration zone and the space of business networks in it. When considering economic space in relation to building a business network in improving business security, main focus is on the quality of economic space that the region has. The proposed methods of evaluating the quality of economic space are actively used to determine the possibility of building business networks in this space. The authors conclude that business networks play a crucial role in improving the economic security of business in a particular economic space. The set of proposed measures provides additional opportunities and increases the influence of economic space on business security and creates the zone of maximum external security

The Kazakhstani manufacturer has repeatedly faced situations when pseudo-enterprises, disguising themselves as domestic producers of goods, works and services, received preferences and used government support measures, won government and other purchases, while not having enough equipment for production. The article is devoted to current problems and prospects for the application of the Industrial Certificate in the Republic of Kazakhstan. The dynamics of the development of the sphere of public procurement of the Republic of Kazakhstan is considered, depending on the specific requirements for certain areas of production of goods, works and services. The material in this article is important from the point of view of ensuring fair competition between competing enterprises in the same industry. The complex of transformations in the system of standardization, certification and quality management has been carried out since the first years of independence of the Republic of Kazakhstan. These transformations have been observed over the years, vivid examples of which are: the application of the European model of technical regulation to the modern realities of the economic situation in the Republic of Kazakhstan, accession to the Customs Union, the adoption of unified technical regulations of the Customs Union, the introduction of new regulations and legal acts defining the share of local content in products and services, as well as the potential of domestic industries. The results of these transformations have proved that the system of technical regulation of the Republic of Kazakhstan is an effective tool for the development of the economy. The development of new Kazakhstani normative legal acts and normative documents introduced to support the domestic producer of goods and services will contribute to the transformation of the old system and the creation of a new one that is fundamentally different from the previous one. The article discusses problematic issues in the field of industrial certification, namely: a lack of qualified personnel; unregulated pricing system for work carried out in this area; the complexity of the industrial certification procedure; a lack of automation of processes of the industrial certification mechanism. Analyzing the practice of industrial certification, this article offers recommendations for solving the above problematic issues. New edition of amendments and additions to the «Rules for the formation and maintenance of the register of domestic manufacturers of goods, works and services, as well as the issuance of an Industrial certificate» approved by the decision of the Presidium of the National Chamber of Entrepreneurs of the Republic of Kazakhstan «Atameken» dated 28.12.2018. No. 28 is designed to reconstruct the process of obtaining the Industrial Certificate. The process should become more transparent, understandable and highly efficient. Also, with the introduction of changes, the problems that hindered the receipt of the Industrial certificate by individual enterprises should be resolved.

The sharp deterioration of the environmental situation in the Republic of Kazakhstan, associated with human activity and the impact of harmful factors on the environment, affected the quality of food consumed by insufficient consumption of domestic fruit and vegetable products containing vitamins, minerals of an alkaline nature, carbohydrates, vegetable proteins, pectin substances and active fiber. The problem of improving the quality of growing and processing fruits and vegetables is one of the main tasks of the food independence of the Republic of Kazakhstan. Currently, the share of large vegetable farms in the Republic of Kazakhstan is only 10%. The volume of industrial processing of fruit and vegetable crops in Kazakhstan is insignificant. The demand for domestic fruit and vegetable products in the country is met only by 35-40%, most of it is imported from countries such as Russia, Kyrgyzstan, Uzbekistan and China. There is a need for the development of organic vegetable growing in Kazakhstan and the creation of new types of domestic fruit and vegetable products containing a sufficient amount of useful and active substances that can bind and remove toxic substances and radioactive elements from the human body. The purpose of the work is to improve the technology of fruit and vegetable semi-finished products with natural spicy and aromatic additives, to develop a multi-component recipe for vegetable mixtures and a method for producing quick-frozen vegetable mixtures with high quality indicators. These studies were aimed at studying the chemical composition and functional and technological properties of vegetables and spicy - aromatic plants for the content of biogenic compounds: carbohydrates, proteins, vitamins, essential oils, minerals and other substances. The structure of plant tissues was studied and the mass fraction of moisture, dry matter, fiber, mono - and disaccharides, pectin substances, vitamin C was determined, the formulation and production technology of Assorted vegetable mixtures were developed, and quality indicators were determined.

Fruits and vegetables are most often consumed without being thoroughly processed before consumption. Some plant foods are vacuum-packed to ensure long shelf life as well as preserving the quality and safety of the product. Fruits and vegetables carry naturally occurring non-pathogenic epiphytic microflora on their surfaces. During growth, harvesting, transport and further handling they can be repeatedly contaminated by pathogens from human or animal sources. Fresh fruit crops have been implicated in a number of documented foodborne disease outbreaks. Outbreaks of diseases caused by bacteria, viruses and parasites have been epidemiologically linked to the consumption of a wide range of fruits and vegetables. The aim of our study is to assess the risk of contamination in fruit and berry crops and how to address this long-standing problem, namely, contamination of fruit and vegetables with unnatural pathogenic microflora. The following fruit and berry crops common in Turkestan region were chosen for the experiment: Apple variety Suislepskoe (stolovka) , peach variety Nectarine and grape variety Kishmish. Bacteriological inoculation was carried out by membrane filtration of used sterile water to obtain flushes from the surface of fruit crops. All work was carried out under full aseptic conditions. The utensils, water and other equipment used in the work were sterilised in advance. The data obtained during the experiment shows that there is a potential for widespread contamination of uncharacteristic microflora of plant products. Based on the results of the study it can be concluded that there are yeasts and acetic acid bacteria on the surface of all three samples of fruit and berry crops, which can be universally contaminated food and are not the natural microflora for the above mentioned crops. Specifically, fruits and vegetables can be contaminated with various bacterial pathogens, including Salmonella, Shigella, E. Coli O157:H7, Listeria monocytogenes and Campylobacter.

Main problem: Today, the opinion about inclusion as the most progressive (in comparison with integration) approach is being strengthened among the society, which allows any child, regardless of the type and severity of the disorder, to learn with their normatively developing peers. The introduction of inclusive approaches into school practice can be called one of the top priorities of the state educational policy of the Republic of Kazakhstan. Inclusive education will help to resolve the contradiction between the legally guaranteed rights of children with disabilities to equal access to quality education and the de facto inequality in its implementation. Inclusion must be systematic and focused, not spontaneous. Therefore, it is optimal to teach a child with disabilities within the framework of the system of continuous general education. The creation and effective functioning of this system is impossible without a trained teacher, who is a key figure in the implementation of inclusive education. Purpose: Substantiation and disclosure of the contradiction between the guaranteed right of children with IAD and equal access to quality education for the socialization of children with special educational needs in inclusive education. Methods: in the course of the research, descriptive, systematization and analytical methods were used in the application of theoretical concepts, government programs, and legislative acts in inclusive education. Results and their importance: The implementation of the research goal is facilitated by the use of an alternative to the classroom-based organization of the educational process for the progressive development of children with IAD, which allows them to study harmoniously, regardless of the type and severity of the violation, together with their normatively developing peers. The given pedagogical observation is the obtained practical result of this study. The development of the system of class-based organization of the educational process for children with IAD in educational institutions is aimed at forming an effective system for ensuring the comprehensive development of inclusive education.

Main problem: One of the officially recognized problems of the system of state planning and regional development is imperfection of the methodology for assessing the effectiveness and efficiency of the implementation of the activities of state bodies. In fact, there is no assessment of economic and social efficiency and an assessment of the impact on society. In this regard, the authors have developed methodological approaches to assessing the quality (effectiveness) of state programs (on the example of the program of the Republic of Kazakhstan “Employment Roadmap – 2020”) is urgent task for theory and practice of regional development. The purpose of the research is the investigation of the methodological foundations for evaluating the quality of implementation of state programs of the Republic of Kazakhstan in the field of employment (based on the materials of program of the Republic of Kazakhstan “Employment Roadmap 2020”). Methods: The article uses a systematic approach to solving problems that ensures the unity of qualitative and quantitative methods: qualitative content analysis; a monographic method; the method of economic and statistical research. Results and their value: The value of the study lies in the fact that methodological approaches to the evaluation of programs in the public administration system are identified. For an economic assessment involving the calculation and analysis of unit costs per program participant, the authors propose to conduct dynamic and comparative analysis of the values of unit costs for achieving final results in directions of“DKZ-2020” program. This will allow to compare individual projects and program areas by costs in dynamics and further to identify those factors that work for their unjustified growth. The calculation of presented indicators is also important in regional context, since it allows considering those regions that significantly deviate from the national values in one direction or another

This scientific and practical article is devoted to the analysis of the results of an experiment aimed at psychological and pedagogical support of the process of building a project for the development of the inner world of a player of a children's and youth football team of the professional football club "Lviv" from the Ukrainian city of Lviv. A special feature of the psychological and pedagogical support for designing the development of the student's psyche is the use of the paradigm of the language of the theory of activity in the version of the Moscow methodological and pedagogical circle (MMPC), using the language of schematic images and the pyramid of subjectivity, explaining the path of formation of human mental mechanisms in the unity of cognitive, emotive and conative processes, starting from the vital level of their development to the level of spirituality. Another feature of the article is that the presentation of methods and techniques does not occur in a separate part of it, but in the process of describing the steps of designing a development plan that is formed for absolutely all professional athletes who have the acmeological potential of professionalization in football. It is presented in the form of 11 steps to create an individual trajectory of the player's development. In each of these steps, it is important that the coaches and the player participate with their parents, representatives of the club, which has its own component in terms of the volume and quality of the efforts required on their part. The article reveals the first of the 4 steps of creating a reasonable player development plan. For example, we consider working with one of the players. The content of this particular illustration is a very illustrative and demonstrative example. It is assumed that a series of articles in this publication will reveal the topic of student development management, which will include both scientific and theoretical and review types of works. The next article will be a continuation of this one in terms of demonstrating the success of implementing this particular development plan by the example of several players from a team consisting of 22 players who have been trained in a similar way, i.e. using methodological criteria for the organization of psychological and pedagogical support for the development of thinking, sensory-motivational and volitional characteristics of players by football club coaches.

The main problem: This article is devoted to the key problems of the fuel and energy complex of the Republic of Kazakhstan: 1) lack of production capacity to meet the growing demand for energy and fuel from the economy and the population. Increased demand for electricity and heat, which will require the commissioning of new generating capacities.There is already a shortage in the fuel markets. Modernization and bringing the existing oil refineries (hereinafter referred to as refineries) to full capacity will not allow providing the domestic market until 2030; 2) the export orientation of raw materials, the dependence of the economy on the export of energy resources. In order to attract technology and investment in the oil and gas and nuclear industries, agreements on the extraction of energy resources were concluded with international export companies. In the medium term, Kazakhstan may face a shortage of oil for domestic refineries, if measures are not taken to stimulate its refining within the country. The uranium mined is fully exported; 3) high energy intensity of the economy, low level of energy efficiency. There is a high potential for increasing the efficiency of energy use both in the electric power industry and fuel production, and at the level of final consumption – in industry and housing and communal services; 4) decrease in the replenishment and quality of the resource base in the oil and gas, coal and nuclear industries; 5) low environmental friendliness of technologies used in the fuel and energy complex. Purpose: The purpose of the article is to reveal the problem in the field of ensuring the fulfillment of international obligations between different countries and their own energy sufficiency by gradually changing the structure of energy production. Methods: Studying the experience of increasing the efficiency of the use of energy resources and energy saving as a priority of the state policy of the country. Analysis of production capacity with a constantly forecasted shortage of primary energy resources and insufficient growth of capacity for the production of electricity and heat. Consideration of the possibility of compensating for the shortage by saving energy resources, increasing tariffs for energy carriers, as a stimulating factor for their effective use. Results and their significance: The results of this article will reflect the problems of energy, as the most important driving force of global economic progress. The well-being of the people depends on the state of the country's energy sector, therefore there is an urgent need to solve the emerging problems. The global energy problem is, first of all, the issue of stable and efficient supply of fuel and energy to mankind. Today, the energy sector of Kazakhstan is focused on fuel resources, since the country is provided with hydrocarbons and other energy resources. About 72 % of electricity in Kazakhstan is generated from coal, 12,3 % from hydro resources, 10,6 % from gas and 4,9 % from oil. Thus, the four main types of power plants generate 99,8 % of electricity, while alternative sources account for less than 0,2 %.

In the conditions of market uncertainty, the coronavirus pandemic, the absence of an officially articulated national idea, national interests and ideology in Kazakhstan, the problem of the lack of logically justified and coordinated coordinates of systemic thinking, an unambiguous paradigm of humanitarian thinking (analytical, pedagogical, managerial, economic, etc.) is becoming more and more clearly realized as the most important conditions for personal, civil and professional self-determination. The purpose is to substantiate the general logical coordinates and methods of reformatting the ambiguous humanitarian paradigm used in the activity. The study used various methods: the ontological principle of genetically meaningful logic, the method of transformation of concrete images of objects based on their abstract essence, the method of ascent from the abstract to the concrete, the speculative language of schematic images of thought and the language of methodological theory of activity. Logically justified universal abstract-concrete coordinates of universal motion are given. In relation to life and the world of activity, they can be concretized by coordinates: "standard of living – efficiency of activity", or "efficiency of activity – time", or "results – costs", or "quality – quantity", etc. The use of motion vectors in the logic of descent from the concrete to the abstract (NCA), ascent from the abstract to the concrete (AAC), as well as in their combination – logic CAC gives certainty to thinking. As an example, the scheme of the qualitative difference between educational (pre-professional) activities from professional ones using these methods and paired dialectical categories is given. The scheme and description of the functional model of the system object, considered as a rubicon of the transformation of educational activity into professional activity, are given. To reformat the indefinite, ambiguous paradigms of the humanities used in the activity into functional-logical, visible, constructive and unambiguous, it is recommended to use abstract-concrete coordinates, the methods given, the language of schematic images and the paradigm of the methodological theory of activity. As an example, the concept of a typical unit of activity development is given. A visible unambiguous paradigm is a necessary, but not sufficient prerequisite for adequate personal, civil and professional self-determination of a person in situations of high uncertainty. A sufficient prerequisite is the acquisition by subjects of appropriate reflexive-thinking abilities for self-determination, self-organization, self-regulation, etc.

Currently, the problems of environmental safety are facing society. The industry develops every year. In this critical economic situation, the oil industry is a stimulant for the economic sector in Azerbaijan. The level of development of this industry is also relevant due to other reasons: sociological, technological and features of the economy of Azerbaijan. The production activity of oil processing, concentrating harmful substances and energy, is a source of man-made danger and pollution of the natural environment. The risk management process mainly consists of three stages - risk safety analysis, risk assessment, which is carried out in comparison of calculated and actual risk levels, the so-called acceptable risk levels and the adoption of appropriate regulations and management decisions. One of the factors that should be taken into account when assessing risk and safety is to determine the necessary costs. Since these costs are paid directly to the company, they try to minimize them as much as possible, which reduce the accuracy of risk assessment. One of the objectives of the study is to determine the optimal value of the necessary costs. It is established that the less reliable the method, the lower is the cost of its implementation. The methodological basis of the work was scientific works on these problems of scientists-economists, mathematicians on safety and risk assessment at industrial enterprises. When developing the presented methodology, computational algorithms developed by Dow Chemical were used. This company has collected a large volume of material on accident statistics, taking into account damages. Based on the obtained and experimentally verified data, a system of indices has been developed, an assessment of various indicators for qualitative and quantitative risk assessment of oil refineries. The analysis of the technogenic danger of oil refineries makes it possible to determine ecological and economic losses and choose rational possibilities of acceptable risk. The required costs, depending on the level of risk, are determined based on an increase in the accuracy of calculating the probability of occurrence of the cause of risks. The article examines the relationship between the expected level of risk and economic losses during oil refining in separate technological units, which allow determining the required level of risk and the expected economic damage.

The article is devoted to the development of a technology for obtaining organic fertilizers from poultry waste based on biocatalytic processes. Currently, many poultry farms have become sources of environmental pollution, thereby causing serious environmental problems and economic and social damage. The problem of reliable protection of the natural environment from pollution by bird droppings is currently relevant. In the area of operation of large poultry farms, air pollution by microorganisms, dust, foul-smelling organic compounds, which are decomposition products of organic waste, as well as nitrogen, sulfur, and carbon oxides, is possible. Bird droppings contain acids, nitrogen, phosphorus and potassium, heavy metals. The content of nitrogen, phosphorus and potassium changes dramatically depending on the quantity and quality of the feed. Humic substances isolated from brown coal have a sufficiently high sorption activity and are used as cheap sorbents for solving a number of environmental problems in industry. These studies are aimed at minimizing the main disadvantage of the anaerobic digestion process, the low reaction rate, which leads to the need to create large-volume bioreactors. On the basis of the research carried out, a technology has been developed for obtaining organic fertilizers from poultry waste by the method of anaerobic fermentation of chicken manure with humidity at a temperature of 27 °C - 50 °C with the addition of sodium humate. The resulting fertilizer is intended for use in agricultural production, horticulture, floriculture, forestry, municipalities, in household plots in order to increase the yield and quality of crop production. For the developed technology, an application has been submitted for obtaining a Patent for the invention of the Republic of Kazakhstan «Method for producing organic fertilizers» (priority No. 2021-22818, dated July 13, 2021). The invention allows to significantly reduce the time of fermentation, to enrich the product with organic and mineral products contained in sodium humate, to convert the salts of heavy metals into an insoluble state, to improve the environmental friendliness of the method.

Main problem: The development of the genetic potential of poultry, as well as the receipt of high-quality eggs for collection or further incubation, are possible only if rational and correct feeding of the broodstock and, more importantly, the young during its rearing period is observed. During this period, high-quality protein nutrition occupies an important place, which determines the level of productivity, stable growth, reproductive ability of the bird, as well as the state of health during the feeding period. Protein deficiency always remains an urgent problem for agricultural land, whose main activity is aimed at breeding dairy and meat animals. In this regard, research in the field of finding the use of non-traditional protein feed is of great need. If we summarize the modern achievements in the field of protein and aminoacid nutrition of poultry, we can find the most profitable way to obtain feed additives in industrial production. The studies, the results of which will be described in this article, are aimed at studying the possibility, experimental substantiation of the optimal dosage and the effectiveness of using the feed additive from crustaceans Artemia salina in the diets of chickens of the egg-meat direction of productivity [1]. Purpose: To study the possibility, experimental substantiation of the optimal dosage and the effectiveness of the use of the feed additive from crustaceans Artemia salina in the diet of chickens of the egg-meat direction of productivity. Methods: Analysis and generalization of theoretical information Results and their significance: This article presents the results of the analysis and generalization of theoretical material. The theoretical significance is determined by the fact that it is invested in scientific and practical problems related directly to solving urgent problems, increasing the efficiency, competitiveness and quality of domestic poultry products.

The article compares modern and traditional pedagogical methods used in the process of teaching a foreign language in primary school, differentiates both the advantages and disadvantages of each of them, and indicates ways to supplement the shortcomings of traditional methods with new methods. Currently, the main methods used in teaching a foreign language are being considered. Among the new innovative methods that have recently appeared in the sphere of teaching foreign languages there are community language learning / counseling learning, the sugestopedic method, total physical response, the method of language teaching using information and communication technologies, consciousness-raising approach, task based learning, neuro- linguistic programming, guided discovery, the test-teach-test method. Their influence on the development of language competencies and creative abilities of primary school students are considered. The authors note that the main and most important condition of modern methodology in the process of teaching foreign languages is the creation of an artificial foreign language environment, i.e. the creation of a natural linguistic environment. The authors comment on the concept of "electronic linguistic environment" based on recent research. They show that "digital" children are completely immersed in the computer world, i.e. they live in an electronic linguistic environment and this allows them to solve the tasks of teaching a foreign language. The purpose of the article is to analyze traditional and modern educational methods used in modern English lessons. Activation of the student as the main figure of the educational process, the ability to work in close contact with other students, giving the student the opportunity to work independently, depending on their physiological, intellectual, psychological characteristics, is carried out using individual, paired, group, classroom and other forms of work. Both traditional methods and the latest modern methods are listed among the named teaching methods. Each method has its own characteristics. Therefore, it is very important to consider them in a comparative plan. Each old and new method has its advantages and disadvantages. Therefore, the methodology of teaching English always requires additions and improvements. They are of great importance for expanding the horizons of students, increasing cognitive activity, improving knowledge, skills and language competencies. The authors used the following methods: the descriptive methods, methods of systematization, analysis, interpretation were used in the course of the study. Тhe authors of the article note that methods of teaching a foreign language are of great importance for the comprehensive development of primary school students, obtaining high-quality education, good command of English, achieving good vital indicators, conclude that every teacher should be able to use best practices, developing their creative research and effectively teaching modern English. The results of learning through new methods, such as differentiated learning, project-based learning, communicative learning, information and communication training, etc., providing the formation of personality, its language competencies, will undoubtedly contribute to the independent development of the child, the formation of his language competence, the development of cognitive, creative abilities of students.

The specifics of the management of healthcare institutions are due to the fact that healthcare is a special field of activity that differs significantly from other types of activities. One of the most important management tasks in the field of public health protection is the achievement of targets: improving the quality and accessibility of medical care through the effective use of limited financial, material, labor and other health resources in conditions of rapidly growing competition in the medical services market. The purpose - is to review and summarize the domestic and foreign experience of management in health care. The article emphasizes that the serious institutional transformations taking place in the domestic healthcare system in recent years are aimed at improving the quality of medical services in the implementation of the state guarantees program, at switching to a single-channel model of financing medical care, at introducing the principles of result-oriented budgeting into the activities of socially oriented organizations providing socially significant services. The practical implementation of the above innovations requires a revision of the concept of management in the field of healthcare, the priority areas of which correspond to the best world practice. The preservation of the health of the nation is a strategic guideline of state regulation in the field of healthcare, which determines the targets of state policy. When writing the article, traditional methods (comparison, description, measurement), general logical methods and research techniques (analysis, generalization, etc.) were used. The article discusses the main theoretical foundations and organizational and economic mechanisms of the healthcare management system in market conditions. The author notes that effective healthcare is a significant factor stabilizing the socio-political situation at all the above-mentioned early stages of the reform. Therefore, studies of economic relations in healthcare in the transition period, the role of innovation policy in the management of healthcare institutions are becoming relevant. At the same time, issues of the effectiveness of the functioning of healthcare institutions are of particular importance, which are ultimately determined by the creation of socio-economic, scientific, technical, organizational and economic prerequisites for the progressive development of productive forces using the achievements of scientific and technological progress, the latest medical technologies.

The article considers international experience in automating the system of land relations, aimed at improving the quality and reducing the time for the provision of services by state bodies to citizens and organizations, providing access to information databases, which positively affects the development of effective government decisions for the effective use of land resources, and also improves social welfare. In Kazakhstan, the transfer of land cadastral information to electronic media continues, and the automated information system of the land cadastre is being improved. The task of creating a unified mechanism for state cadastral registration of land plots according to uniform rules and technologies for all, identification and individualization of land plots and objects of immovable property firmly associated with them, for subsequent state registration of rights to land plots and transfer of information to the territorial bodies of the State Revenue Committee, remains relevant. To study the experience of developed countries in the provision of public services in the system of land relations through the development of official land information systems. The article used general scientific methods from general to concrete one, synthesis, theoretical generalization, induction, deduction, and system analysis. Based on the studied experience of developed countries, relevant conclusions and proposals were made: information technology is a useful tool and can help overcome bureaucracy, backwardness, isolation, monopolistic practices, and inefficiency in the public and private sectors; the use of state bodies for effective regulation of geographic information (GIS) systems that allow solving a wide range of tasks, as well as the use of modern information technologies, contributes to the transition of the activities of state bodies to a qualitatively new level of state control, which allows for full transparency of information about the land fund and objects real estate of the country, as well as its availability to the population. The provision of public services in the field of land relations using information and communication technologies reduces entry barriers and transaction costs in business, increases competition, and improves mechanisms in this area.

In the implementation of social policy, the most common practice in foreign countries is the payment of a part of the cost of the service by the recipients of social services. However, this decision raises some doubts. After all, these services are for members of the public who are unable to take care of themselves and generally cannot earn a living. On the other hand, when the state bears the costs, there is a risk of overconsumption. The decision on the extent to which a beneficiary of a social care service should share in the costs of social services depends on a variety of factors: criteria for social justice in the country and perceptions of social justice (for example, public opinion about whether unpaid social care services should be provided to all or only the poor), from a group of people in need of social care (social care services for children from social risk groups, especially for people with severe disabilities, are usually free of charge), from the economic ability of the state to provide free social services, etc. The purpose is to study the positive foreign experience in the provision of social services in modern conditions. Determine the role of the state as the dominant body in the implementation of social policy. The study is based on the principles of a systematic approach. Also, when writing the article, the dialectical method of cognition, the methods of scientific generalization and classification, the method of comparative analysis were used. Systematization and generalization of foreign experience in the provision of social services, taking into account the definition of its main goals and objectives, show that the changes taking place in the field of social protection in developed countries over the past two decades already indicate that the model of organizing social assistance, based on the dominance of market relations, operates in many countries. Under the hierarchical model, the organization of social services is based on a vertical division of responsibility and state functions, and the state has a monopoly on providing social care services and funding state or non-state care institutions. However, in recent decades, social assistance services have already been purchased from market participants and funded not by the state, but by the person in need of social assistance. However, such a market is not pure, since the state is involved in both the purchase and pricing of the service.

One of the management concerns of the progressive development of a modern organization is the efficiency of its HR potential. This concern is often resolved to quality issues of training graduates, inefficient labor market regulation, both at public level and regional one. These factors, external to the organization, positively impact the effectiveness of its activities, but today the government and business environment have already formed the tools to address this problem. However, there are also a number of inner concerns in HR management based on non-exact coordination and balanced HR Strategy, its orientation, goals and objectives and the company’s strategy. But only in this situation, both HR Strategy and HR Policy, more specifically, can become an effective tool for HR management as part of the company’s strategic development objectives. The purpose is to study and make a comparative analysis for supporting HR Policy of a number of major Kazakhstan companies, to analyze the relationship and coordination of companies’ HR Policy with their general strategy. We used classic methods, such as analysis, comparison, description, generalization, justification, etc., while preparing the paper and rationalizing the problem studied in it. As to this paper, based on materials of major companies of the Republic of Kazakhstan, the authors study and identify the content of HR Strategy and HR Policy as the main factors of domestic employers’ approach to HR management issues. The analysis proves the multi-vector approaches of Kazakhstan organizations to the formation and HR development. It seems also obvious that HR Policy of Kazakhstan companies has been and remains highly situational manner providing rationale to solve some or other HR problems related to dynamics of market situations and dynamics of goals and objectives for their development. The authors emphasize that the effectiveness of HR management and the HR Policy one of the organization requires a clear comprehension of the position and relevance of HR in organization. Honestly, this comprehension will be mainly governed by such factors as ownership, industry aspects, productivity levels, buoyancy rate of technologies used and the market of products or services sold by the organization. It is highly important that this comprehension is embodied properly in HR Strategy and HR Policy of the organization and is balanced with its market development strategy.

Main problem: The article analyzes water quality assurance as the main goal of preserving human health. The study of chemical and microbiological parameters of wastewater and drinking water was carried out using generally accepted standards. The number of deaths associated with the use of contaminated drinking water, according to WHO, tripled in 2021 and reached almost 19 thousand against 6 thousand in 2020. In addition, the number of neoplasms, diseases of the genitourinary system, digestive organs and skin increased by 2 %, to 1.486 million. The reasons for the increase in the level of harmful chemicals and microbiological pollutants in the water are outdated sewage treatment plants, old pipes and disinfection with chlorine. Purpose: Study of the quality of wastewater and drinking water in Pavlodar, study of the quality of wastewater and drinking water in Pavlodar. Methods: Sampling of wastewater, chemical and bacteriological analysis of wastewater and drinking water, statistical method, correlation analysis of experimentally obtained results and calculated characteristics, etc. Results and their significance: In the field of public health risk, pollution of reservoirs that are sources of household drinking water supply and recreational water use, the continuing necessary high deterioration of water supply networks, their accident rate, as a result of low level of operation, failures in the operation of treatment facilities. Hygienic assessment of reservoirs according to complex indicators indicates the continuing high degree of water pollution in places of water use. The water quality indicators of the surface reservoirs of the region remain low in terms of sanitary and chemical (primarily organoleptic and general sanitary), as well as microbiological indicators. According to toxicological indicators, the level of water pollution in places of water use is estimated as moderate. The main pollutants of the Irtysh River in Pavlodar are industrial enterprises and housing and communal facilities that discharge untreated or insufficiently treated wastewater into reservoirs. A complex of causes of drinking water pollution has been identified: high deterioration of water supply networks, their accident rate, because of a low level of operation, failures in the operation of treatment facilities, unfair treatment of industrial wastewater by industrial enterprises of Pavlodar, etc. Priority preventive directions for improving the quality of water as a source of life are the implementation of long-term targeted planning of measures for the modernization of water supply and sewerage networks and facilities in Pavlodar. The state of water supply necessary and measures to improve it should be constantly monitored and considered at meetings of sanitary and anti-epidemic commissions.

Combustion engines operate over a wide range of power and speed. To the greatest extent, this applies to automotive and tractor engines and diesel engines operating at fractional and idle loads for a significant part of the operating time. When designing engines, the choice of their main design and layout parameters is carried out in a comprehensive manner, taking into account the provision of the required power and efficiency in the modes of maximum torque and rated power. However, ensuring the economical operation of modern highly accelerated diesel engines at low loads and idling causes a whole range of problems related mainly to the organization of effective mixture formation and fuel burnout, as well as to ensuring stable fuel supply. Thus, the cycle dose of injected fuel in idle mode is 8–12 times less than the cycle dose in nominal mode, which determines increased requirements for fuel equipment and difficulties in ensuring high-quality mixture formation. At the same time, diesel engines operate in idle mode up to 50 % of the total operating time, consuming up to 15–20% of the fuel. For truck engines, the relative idle time is approximately 20–25 %. Thus, the development of measures to improve the efficiency of diesel engines at idle is relevant. The purpose is to perform a numerical analysis of the effect of switching off cycles in diesel engines for autotractor and diesel locomotive purposes on the working processes in the cylinder and the indicator parameters of the cycle in idle modes. When writing the article, traditional methods (comparison, description, and measurement), generallogical methods and research techniques (analysis, generalization, etc.) were used. A numerical analysis of the operating cycle of a diesel engine equipped with a cycle shutdown system was performed. The relationship between changes in fuel injection characteristics when cycles are turned off with indicator indicators of the engine operating cycle in idle load modes is disclosed. It has been established that the expediency of switching off cycles in a specific engine operation mode is determined primarily by the features of the injection, carburetion and fuel burnout processes.

Main problem: The unfavorable conditions in which a significant part of the population of our country lives (living in conditions of harmful, stressful, physical, chemical and radiation effects), an imbalance in nutrition dictate the need to create a variety of functional products enriched with pro– and prebiotic factors. In the science of nutrition, a functional direction has been developed - this is nutrition, which provides for the consumption of such products of natural origin, which, when used daily, have a regulating effect on the body as a whole, its certain systems, organs, providing a drug-free positive correction of their function. Compared with traditional types of dairy products with high organoleptic and commodity characteristics, produced on the basis of classical technological techniques, dairy products of the new generation should have increased nutritional and biological value. The article is devoted to the research and development of the technology of a new cottage cheese product - cottage cheese paste produced with the addition of lactulose concentrate and fruit and berry fillers. This article discusses the steady trend towards the use of fermented milk products with functional properties in the diet of modern humans. Purpose: Study and development of technology of thermized cottage cheese paste enriched with prebiotic lactulose and fruit and berry fillers. Methods: Analysis and generalization of theoretical information, organoleptic evaluation, physicochemical methods of analysis, microbiological methods of evaluation of cottage cheese paste, quality control of the finished product. Results and their significance: The positive role of prebiotic substances in the vital activity of the macroorganism was studied. It is not for nothing that academician Andrei Georgievich Khramtsov once called lactulose "a miracle made of milk." Lactulose, being a strong bifidogenic factor, allows stabilizing the microflora of the stomach. Lactulose activates the growth of bifidobacteria, which take root well in the intestine and ferment lactulose to form lactic acid. Lactic acid suppresses the development of pathogenic and putrefactive bacteria. As a result of the conducted studies, it was determined that the cottage cheese paste enriched with lactulose had high quality indicators and retained its consumer properties during the entire storage period. The introduction of lactulose into the recipe of cottage cheese paste does not reduce the nutritional advantages of the finished product.

Main problem: The use of waste heat is most often solved by installing heat exchangers, but this is not effective when the temperature of this heat does not exceed 10-15 0 C, in which case this heat can be used using a heat pump. Where can I get this heat? Almost any enterprise needs cooling of any equipment elements or substances – working fluids; the heat received from them can be sent to a heat pump and used here at the enterprise. Purpose: Consideration of the possibility of using the heat of cooling water from the pump CNS 60-165 and the proposal of a new scheme with the installation of a heat pump that uses this heat. Methods: This is achieved due to the fact that it is proposed not to discard the heat, but after its use in the heat pump evaporator, transfer it to the heated medium - water, which is then sent to the shower cabins of the enterprise. Since the showers are located in the same room, the cost of transporting heat and losses will be minimal. Methods: In the course of the research, the possibility of using the waste heat of an industrial enterprise for using it here at the enterprise for the purposes of hot water supply was considered. For these purposes, it is proposed to install a heat pump, thanks to which the thermal potential increases, which makes it possible to fully use the received heat. Results and their significance: As the experience of foreign countries has shown, heat pumps can be widely used in many industrial enterprises, and in conditions of increased competitiveness, in order to reduce energy costs and the cost of manufactured products, install heat pumps to utilize excess heat, for example, process water, which is available in many production allows you to have a significant economic effect.

Main problem: Bird droppings and animal manure contain acids, nitrogen, phosphorus and potassium, heavy metals. The content of nitrogen, phosphorus and potassium changes dramatically depending on the quantity and quality of the feed. Purpose: To study the effectiveness of the use of organomineral fertilizer from poultry waste, obtained using biocatalytic processes on the growth and development of plants. Methods: An application for a Patent for the invention of the Republic of Kazakhstan "Method of obtaining organic fertilizer" has been submitted for the developed technology for obtaining organic-mineral fertilizer. In the soil intended for growing seedlings of tomatoes of the “Pepper-shaped Orange” variety and peppers of the “Bogatyr” variety, the resulting fertilizer was applied in the amount of 1 kg per 1 m2 of soil, which was dug to a depth of 8-10 cm and used to grow seedlings in closed ground and subsequent for planting it in open ground. Soil without fertilization was used as a control. The process of soil preparation for open ground, intended for planting seedlings, was carried out for the experimental field with the introduction and control without fertilization. Experimental and control studies were carried out under equivalent climatic conditions, the scheme and technology of watering plants. In total, 100 bushes of each plant species were used in the experiment. Results and their significance: The use of the obtained organomineral fertilizer allows to increase the yield of vegetable crops (tomatoes, peppers) by 20-25% compared to the control. In addition, in the experimental samples, an increase in the number of fruits on a bush was noted with an increase in their size, a decrease in the growing season and the number of damaged fruits.

The main problem: Modern research in the development of fermented milk products is focused on increasing the bioavailability of milk components, as well as the use of bacterial components of sourdough, which increase health properties. The use of the fermentation process of skimmed milk with a combined starter consisting of traditional for cottage cheese and starter cultures of probiotic cultures immobilized in a gel of biopolymers is very important. Purpose: The purpose of this study is to determine the optimal amount of starter, consisting of an association of probiotic cultures immobilized in a gel of biopolymers (membranes) to be added to fermented skimmed milk in order to enrich it with functional ingredients. Methods: A one-factor experiment was used. The culture association Propionibacterium freudenreichii subsp. was used as a regulatory factor. Shermanii, Bifidobacterium lactis and Streptococcus thermophilus, immobilized in a biopolymer gel, added to skimmed milk in the form of membranes (determined as a percentage of the mass of fermented milk). Controlled factors are the main indicators characterizing the efficiency of the skim milk fermentation process; these are active acidity, the logarithm of the number of viable cells of bifidobacteria, the logarithm of the number of viable cells of propionic acid bacteria, and organoleptic evaluation. Results and their significance: Based on the results of a mathematical analysis of the totality of values of controlled factors depending on the amount of starter cultures of probiotic cultures, mathematical models were built to determine the degree of influence of the starter on the quality indicators of the product, using the Table Curve 3D-v4 mathematical computer program.

Based on the psychological aspect of the concept of "qualification", the article analyzes the main directions of the formation of methodological qualifications of future teachers of mathematics and advanced training in pedagogical universities. It is possible to achieve high-quality teaching of geometric subjects in higher educational institutions by using methodological and meaningful methods in organizing the educational process. The creation of a certain structure of the educational process, the definition of teaching methods and means, the careful selection of subject content were determined by the specific principles of pedagogy. Basically, these principles are the real achievements of modern pedagogy and are constantly changing. The existing system of didactic principles can be gradually changed and expanded The purpose is to choose the main didactic principles and to offer a scientific-methodological basis for improving the methodological preparation of future mathematics teachers in the Pedagogical University for solving and teaching geometrical problems. In this regard, interviews, questionnaires, analysis of the curriculum and its content, as well as discussions with experienced teachers and methodologists in teaching geometry were conducted; pedagogical control and diagnostics of the educational process were carried out. In order to test the effectiveness of the methods proposed by us, pedagogical experiments were carried out. The entire system of training future teachers of mathematics faces new challenges related to the implementation of effective didactic principles for teaching geometry in pedagogical universities. First of all, it is the principle of mastering innovative teaching methods of the future teacher of mathematics and the principle of mastering new pedagogical and information technologies of education. The results of the study can be used as a methodological basis for further research on the professional orientation of teaching mathematics in universities.

As part of solving the priority tasks set in the Address of the President of the Republic of Kazakhstan Kassym-Jomart Tokayev, a significant role is given to the development of the food industry, including dairy products. Big tasks are to be solved by branch science in the field of processing raw materials of plant and animal origin using the achievements of bio- and nanotechnologies to improve the quality, biological, nutritional value and food safety. New approaches are needed to organize the complex processing of plant and animal raw materials in order to improve the economic, social and environmental aspects of the production itself, as well as the life of the population of the Republic of Kazakhstan. Despite the extensive range of processed cheeses, it is constantly updated. This is due to the need to meet the requirements of nutritional science, changing consumer demand, as well as the availability of raw materials and considerations of the profitability of a particular type of cheese. The working hypothesis of the research was the assumption that for the melting of raw materials it is possible to use reagents that affect the active acidity of the medium, stabilize the structure, bind moisture and improve the consistency and organoleptic characteristics of the finished product. The article is devoted to the issue of the process of melting rennet cheeses. The purpose of the article is to show that the melting process is closely related to different forms of raw material protein micelles. In this article, the influence of the type and amount of melting salt on the formation of the structure of processed cheese is considered, the rheological indicators of experimental products are determined in accordance with the scoring of processed cheeses. The indicator of water activity (аw) was established, the microbiological parameters of the experimental products were determined.

In Kazakhstan, within the framework of the Program «Development of domestic value and export-oriented industries», new modern dairy enterprises are being actively modernized and new modern dairy enterprises are being created, where membrane processes are being introduced to concentrate the components of milk. This is necessary for the rational and integrated use of raw materials, including through the processing of secondary resources, the main of which is whey. Improving the production processes of traditional food products and developing innovative ones is possible only with the use of the latest technologies and technological equipment. Membrane processes are widely used for the use of fractionation and concentration of liquid dairy products, which allows for a new solution to the processing of raw materials and opens up opportunities in the development of new types of food products. The article is devoted to the issue of production and processing of whey in Kazakhstan. The main types of membrane technologies and the advantages of their use in the dairy industry in the Republic of Kazakhstan are considered. The role of membrane technologies in the processing of whey is substantiated, various methods of introducing membrane processing methods to ensure the demineralization of whey, obtaining products with high biological value and consumer properties, reducing the cost of energy carriers, reducing the volume of raw materials in order to save transport costs, non-waste processing of milk solids, recycling water are described. This article analyzes the problems of using resource-saving membrane technologies in the production of dairy products in the Republic of Kazakhstan, ways to solve existing problems associated with increasing the economic efficiency of enterprises. The favorable impact of the use of membrane technologies on the social and environmental aspects of whey processing in the country is substantiated.

In order to successfully conduct agricultural work and obtain a competitive harvest, it is mandatory to carry out spraying operations of crops that require highly qualified personnel, expensive equipment and suitable weather conditions. The use of tractors for spraying fields is the most common solution available at the moment, has disadvantages: high cost, risk of damage to the crop by "hitting", "hooking" or otherwise; environmental damage; due to exhaust gases, the demolition of the solution increases with increasing speed. Using a device designed specifically for spraying equipment is an ideal solution. The purpose of the article is to develop a working model of an automated sprayer for processing agricultural crops. The methods used are: technical justification of a controlled device for processing agricultural crops. Calculation of functional capabilities, algorithms of operation of the proposed automated device: selection of the type of sprayer, engine, chassis, controller, battery, as well as justification of the possibilities of using alternative energy sources (wind energy, solar energy); development of a 3D model of an automation device for anti-weed processing of agricultural crops, printing of parts, assembly of mechanical and electronic parts. Making a prototype using 3D printing; development of the wiring diagram of electronics, software (firmware of the microcontroller; application that controls the settings), testing of the prototype, assembly of the current model; rationale for the optimal use of Arduino and Raspberry Pi boards in this device in a pair: Raspberry Pi will allow you to control processes on the Arduino and easily interact with the Internet when the Arduino itself will perform simple operations such as interacting with electronics and reading sensor readings. The manufactured operating model showed compliance with the goals, a high degree of controllability, environmental friendliness, reduction of energy consumed, labor resources and can be used to scale this device. The developed model of the automation device for anti-weed treatment of agricultural crops can be used not only in agricultural pollination, but also as a mechanism for studying soil parameters: humidity, mineralogical composition and chemical content in the ground, using electronic sensors, as well as an automated mobile platform for any purpose requiring accurate navigation through the territory.

Main problem: the article is devoted to the issue of designing basic recipes for dairy products using mathematical modeling methods. The author analyzed the problems in the field of food technology and concluded that mathematical modeling is used in the following areas: clarification of technological process modes, designing recipes and assessing the quality of finished products, as well as predicting the shelf life of new products when they are put into production. The use of dihydroquercetin as a drug that prevents the oxidation of milk fat in the design of dairy products is substantiated. Mathematical modeling was carried out on the basis of experimental and analytical material obtained in laboratory and production conditions. Based on the maximum value of the objective functions, the optimal normalized mixtures and the maximum allowable concentration of dihydroquercetin were selected. The analysis of the received mathematical dependences and models is carried out, the system of linear equations is made. Purpose: to study the effect of natural bioflavonoid antioxidant on the oxidative processes of milk fat and the viability of lactic acid cultures and their associations by mathematical modeling in order to use it in the technology of a new product; conduct an analysis of mathematical dependencies and models, compose a system of linear equations. Methods: the article uses the method of mathematical analysis and the matrix method. Results and their significance: a mathematical model was developed for the dependence of the viability of probiotic cultures on the mass fraction of dihydroquercetin when designing recipes for a creamy-protein curd product, a matrix of the chemical composition of dairy ingredients was presented, and a system of linear equations for basic recipes was compiled. In the course of the study, the spatial configurations of dihydroquercetin, as well as its effect on the oxidative processes of milk fat, were studied. Mathematical modeling of experimental data on the study of the effect of dihydroquercetin on the viability of microorganisms with probiotic properties was carried out. The normalization of the complex of obtained results on the study of the influence of the mass fraction of dihydroquercetin on the fermentation process was studied. Controlled factors characterizing the process of fermentation of model media with dihydroquercetin have been determined. A rationing of the dihydroquercetin complex of more than 0.50% was established; the target function decreases to its minimum value of 0.53 with a mass fraction of dihydroquercetin of 1.00%.

In the dairy market of Kazakhstan, the demand for mass-produced dairy products is decreasing and expanding to innovative fermented milk products for functional nutrition. The main feature of the new technology is multicomponent formulations, which include the main raw materials and biocorrectors, ensuring their high biological and nutritional value. New dessert products are prepared on a dairy or protein basis using vegetable ingredients, fermented with strains of dry starter cultures of direct application or immobilized starter culture Bifimm probio. The purpose is to apply immobilized living cells of pure cultures of lacto- and bifidobacteria as a biocatalyst for the fermentation of dairy-vegetable media. During the study, the method of immobilization of microbial cells in biopolymer gels was used. The most effective method is the inclusion of cells in an aqueous solution of biopolymers with a concentration of 25 %. For immobilization, pure cultures of lactic acid and bifidobacteria were selected in the gel as part of the concentrates "BK-Altai-LS Bifi", "Poleznaya Partiya", "Genesis", "Narine", "Bio-yogurt Vivo", and the main prescription ingredients were selected: milk with a mass fraction of fat of 1 %, 2.5 %, 3.2 %, natural grain additives, jams, juices, nuts. Formulations, technological schemes and production methods, prototypes were developed, quality and safety indicators were determined. Studies have shown the effectiveness of immobilized starter cultures in the formation of fermented dessert products. Out of 20 prototypes with the best indicators, 5 samples were selected, in which the optimal ratio of milk, probio Bifimm starter cultures and biocorrectors averaged 70:20:10. The quality and safety analysis showed that new fermented milk products using immobilized starter cultures have a positive effect of more than -70 % compared to direct-use starter cultures, have functional properties and can be used for healthy nutrition in Kazakhstan.

The ideas of accelerated disclosure of the spiritual, intellectual and professional potential of a person have always been occupied by scientists and teachers (Ya.A. Komensky, K.D. Ushinsky, V.A. Sukhomlinsky, Ya. Korchak, A.S. Makarenko, A. Kunanbayev, Y. Altynsarin and others). Modern innovative teachers are guided by a personality-oriented approach, the ideas of subject-subject relations, and generational cooperation. Georgian teacher Sh. A. Amonashvili wrote: «humanitarian pedagogy perceives the child by his nature. He sees the infinity of the child, understands his cosmic quality and prepares him for the service of humanity throughout his life. It establishes the personality of the child through the determination of his will and builds pedagogical systems, the procedural of which predetermines love, optimism and high spiritual morality. Humanitarian pedagogical thinking seeks to take on something enormous, and this is the power of educational systems and processes that have arisen in its bowels». In order to realize the value of self-disclosure of innovative abilities of students, ensuring the role of a teacher, it is necessary to recognize the intellectual reflexive mechanism of a person as the main subject of Education. The purpose of the article is to identify innovative methods and models of pedagogical activity for the cultivation of innovative abilities of students, which determine the development of the country. The study used methods such as analysis, generalization, synthesis, modeling of scientific sources.

Main problem: achievement of socio-economic sustainability in each locality depends on coordinated actions of executive and representative authorities, which should be focused on creating appropriate conditions for ensuring social standards and improving quality of life of rural population, as well as the development of main economic basis – agricultural production. In this context, in today’s reality, the urgent problem of sustainable development of rural settlements is provision of appropriate industrial and social infrastructure, because systemic development of rural regions depends on this rural infrastructure, which acts as an element of territorial socio-economic subsystem. Purpose: identification and studying of key factors that determines and contributes to balanced development of industrial and social infrastructure of rural regions of country in context of sustainable development goals and objectives. According to the results of the study, the main distinctive features of sustainable development of rural areas are determined due to the provision of industrial and social infrastructure of rural regions, which has a correlation with the level and quality of life of the rural population, as well as the final results of agricultural production. Methods: general methodological principles, systematic approach and empirical methods of economic cognition act as methodological basis for implementation of this study: economic and statistical models, forecasting and modeling, methods of induction and deduction, synthesis, and also logical methods. Results and their significance: results of research can be used as a practical basis in activity of local executive bodies and local self-government bodies. Their use is possible for scientific substantiation of development and implementation of comprehensive plans for development of industrial and social infrastructure of rural areas of region within framework of Regional Development Plan, focused on qualitative improvement of economic basis of villages and the well-being of all segments of rural population.

The present stage of development of power systems is characterized by the need to increase their intelligence, that is, the formation of an environment capable of solving the problems of effective management of all components included in the power system. One of the features of modern energy systems is an active consumer, that is, a consumer who has the opportunity to optimize the schedule of loading their capacities, planning energy consumption, intellectualization of energy consumption. In addition to the fact that there are digital systems for collecting, processing and presenting information, as well as transmitting this information via the Internet, to solve the most difficult task of managing power systems, it is necessary to develop a large number of models adequate to real processes that can describe the processes taking place in the power system under consideration. The purpose is to develop models capable of adequately describing the interrelated processes occurring in the considered elements of the power system, as well as in the aggregate of related elements; development of methods that allow solving problems of effective control of elements of energy systems on the basis of the proposed intelligent models. To solve the problem of increasing the intelligence of the power system, nonlinear adaptive models of electrical complexes of an energy-intensive enterprise included in the power system were developed on the basis of balance equations and artificial intelligence methods. The production of alumina with the properties of inertia, nonlinearity and closure is chosen as the production under consideration. This type of production was chosen as the most difficult to predict due to the unpredictability of changes in energy consumption during the transition to other modes of its operation, associated, for example, with the receipt of raw materials with a different chemical composition for processing. Static and dynamic models of energy consumption of electrotechnical complexes with continuous inertial nonlinear closed production based on artificial intelligence methods have been developed, which makes it possible to eliminate the need to use long time series of retrospective data. For the considered type of continuous energy-intensive production, dynamic characteristics of energy consumption and technological processes are obtained from the main controlled parameters, which make it possible to predict emergency situations and partly man-made disasters. On the basis of a genetic algorithm, a multiparametric optimization problem of energy management of continuous production has been solved, taking into account technological parameters and cost factors.

The article contains the results of a research work devoted to an important problem - the development, production and delivery to the consumer of fermented dairy products of a healthy diet fortified (enriched) with milk protein, a vitamin-mineral complex, and probiotics and prebiotics. Purpose is based on mathematical modeling of experimental data, to determine an effective fermented food system for use as the basis of a fortified (enriched) curd product for a healthy specialized diet; to develop a recipe and technology for its production; to study the nutritional, biological and energy value of a new product. Modern technologies and equipment were used in experimental studies: ultrafiltration, fortification, etc. The studies were carried out by standard physicochemical, microbiological methods in three to five repetitions. Mathematical and statistical processing of experimental data was carried out using the program "Statistica-6.0". A recipe and technology for the production of a curd product for a healthy specialized diet has been developed. Its nutritional, biological and energy value has been studied. The developed recipe and biotechnological parameters for the production of the curd product were tested in the industrial conditions of the leading enterprise JSC "Lyubinskiy MKK". The quality and safety of the curd product was studied in the laboratory of techno-chemical control of FGANU "VNIMI" (Moscow).

In this article, comprehensive studies have been conducted on the rational use of natural pastures, taking into account the seasons and typology, which allows increasing the grazing capacity of forage lands, as well as obtaining high-grade valuable and cheap livestock products. Rational maintenance of livestock on pastures not only reduces fuel costs by 6-7 times, equipment, labor and total feed costs by 2-3 times compared to the content of grazed animals, but also improves metabolic processes and reproductive functions of animals. This determines the great advantage of pasture feeding in the production of important livestock products. In the conditions of vertical zonality of the Zhambyl region, a significant reserve for increasing the production of mutton is their grazing on pasture with the use of pasture turnover; which allows the most efficient use of natural forage lands, increase the live weight and fatness of animals.

Increasing the yield of sunflower is inextricably linked with the evaluation of newly created interline hybrids and their components (parental forms) using various methods for assessing their combination ability (CА). Breeding research in this direction includes large material and practical costs when using the developed methods for assessing combination ability (CА) due to its small analytical capabilities. New approaches to the analysis of the productivity of hybrids in practical studies can significantly increase the volume of the analyzed material and evaluate not only for a short period of testing, but also for a long period of time over the years. Purpose is determination of the combination ability of parental forms of sunflower interlinear hybrids to optimize the breeding process. When analyzing the determination of the combination ability of the parental components of sunflower interlinear hybrids, the method of evaluating the CА according to a special scale developed at VNIIMK (Krasnodar, Russia) was used. This method makes it possible to analyze a large number of hybrid combinations and their parental forms and draw appropriate conclusions for further use in the breeding process. The analysis of the obtained results makes it possible to fully evaluate the obtained interline hybrid combinations by years of testing. We analyzed 1736 hybrid combinations involving 212 maternal forms and 1472 combinations involving 209 paternal pollen fertility restorer lines. 75 maternal lines with a high total combination ability (GCА) and 97 paternal forms with this trait were identified. Maternal lines with high combinational ability VKU 110 A, VKU 140 A and SV 55 A are of interest for use in practical breeding. Among the paternal forms are SV 123 V, VKU 400 V and VKU 401 V. The components of hybrid combinations with high specific combination ability (SCА) have been determined. These are lines VKU 414 A, VKU 413 A, SV 31 Rf, SP 1459. Hybrids with high adaptive properties have been identified when growing conditions change, which will make it possible to purposefully conduct practical breeding to maintain high productivity of sunflower hybrids

Main problem: one of the officially recognized problems of the system of state planning and regional development is imperfection of the methodology for assessing the effectiveness and efficiency of the implementation of the activities of state bodies. In fact, there is no assessment of economic and social efficiency and an assessment of the impact on society. In this regard, the authors have developed methodological approaches to assessing the quality (effectiveness) of state programs (on the example of the program of the Republic of Kazakhstan “Employment Roadmap – 2020”) that is the urgent task for theory and practice of regional development. Purpose of the research is the investigation of the methodological foundations for evaluating the quality of implementation of state programs of the Republic of Kazakhstan in the field of employment (based on the materials of program of the Republic of Kazakhstan “Employment Roadmap 2020”). Methods: the article uses a systematic approach to solving problems that ensures the unity of qualitative and quantitative methods: qualitative content analysis; a monographic method; the method of economic and statistical research. Results and their significance: the value of the study lies in the fact that methodological approaches to the evaluation of programs in the public administration system are identified. For an economic assessment involving the calculation and analysis of unit costs per program participant, the authors propose to conduct dynamic and comparative analysis of the values of unit costs for achieving final results in directions of “DKZ-2020” program. This will allow to compare individual projects and program areas by costs in dynamics and further to identify those factors that work for their unjustified growth. The calculation of presented indicators is also important in regional context, since it allows considering those.

Main problem: the globalization of the information sphere has led to a significant increase in the volume of stored and processed information. To increase the processing speed and provide information to the recipient, it is logical to increase the power of the equipment on which the information is processed. But such a path also leads to an increase in financial costs for continuous modernization or complete updating of computer equipment and application software. Purpose: an alternative solution to increasing the capacity of hardware and software may be to optimize the process of organizing data storage, and already at the stage of information analysis. At the initial stages of the task, a huge amount of information is collected and processed, which needs to be classified, to identify essential and non-essential information flows for the information system being developed, etc. The quality of functioning of the developed information system as a whole and its individual modules in particular will depend on how correctly and fully the structuring and systematization of data will be carried out. Methods: modern methodologies of conceptual design of information systems shift the emphasis from software implementation to analysis and modeling of the production environment. The tools used in the process of conceptual modeling allow you to automate the main part of the processes, including the development of program code in the format of templates (patterns), including the preparation of documentation for the software product being developed. Since modern methodologies and tools are based on the use of powerful graphical tools, this significantly increases the visibility and simplifies the process of making adjustments to the information system project, actually using the "Drag-and-Drop" technology. This allows you to redistribute the time spent on the implementation of the first stages of information system development, allocating more time to the analysis and design of the software environment at an abstract, conceptual level. Results and their significance: the stages of analysis and design do not require large financial costs and are more variable. Information at these stages is easier to adjust and change than, for example, at the stage of writing program code. In addition, it is at these stages that the most active interaction between the developer and the customer is carried out, where maximum visibility and variability of the project of the future information system is required. And the use of modern software design methodologies significantly increases the efficiency of the first stages of information system design.

The main problem: In the conditions of market uncertainty, the coronavirus pandemic, the absence of an officially articulated national idea, national interests and ideology in Kazakhstan, the problem of the lack of logically justified and coordinated coordinates of systemic thinking, an unambiguous paradigm of humanitarian thinking (analytical, pedagogical, managerial, economic, etc.) is becoming more and more clearly realized. as the most important conditions for personal, civil and professional self-determination. Purpose: to substantiate the general logical coordinates and methods of reformatting the ambiguous humanitarian paradigm used in the activity. Methods: the ontological principle of genetically meaningful logic, the method of transformation of concrete images of objects based on their abstract essence, the method of ascent from the abstract to the concrete, the speculative language of schematic images of thought and the language of methodological theory of activity. The results and their significance: logically justified universal abstract-concrete coordinates of universal motion are given. In relation to life and the world of activity, they can be concretized by coordinates: "standard of living – efficiency of activity", or "efficiency of activity – time", or "results – costs", or "quality – quantity", etc. The use of motion vectors in the logic of descent from the concrete to the abstract (NCA), ascent from the abstract to the concrete (AAC), as well as in their combination – logic CAC gives certainty to thinking. As an example, the scheme of the qualitative difference between educational (pre-professional) activities from professional ones using these methods and paired dialectical categories is given. The scheme and description of the functional model of the system object, considered as a rubicon of the transformation of educational activity into professional activity, are given. To reformat the indefinite, ambiguous paradigms of the humanities used in the activity into functional-logical, visible, constructive and unambiguous, it is recommended to use abstract-concrete coordinates, the methods given, the language of schematic images and the paradigm of the methodological theory of activity. As an example, the concept of a typical unit of activity development is given. A visible unambiguous paradigm is a necessary, but not sufficient prerequisite for adequate personal, civil and professional self-determination of a person in situations of high uncertainty. A sufficient prerequisite is the acquisition by subjects of appropriate reflexive-thinking abilities for self-determination, self-organization, self-regulation, etc.

Main problem: For several years, the state has been trying to reduce bureaucratic processes with entrepreneurs, make accounting transparent, reliable and with less labor costs. At the moment, without digitalization in accounting, it is impossible to predict the further development of trade and economic relations in general, since it significantly affects the sale, movement and shipment of goods. The gradual transition of the economy of the Republic of Kazakhstan to the path of digitalization can be considered the most important condition for the development of both the country’s economy and the Eurasian Economic Union. Digital inspection is the process of monitoring goods using digital systems, which helps reduce the risk of human error. In the context of digitalization, work with documentation should be structured in such a way that access to them is ensured throughout the entire limitation period, thereby facilitating the taxpayer in making the right economic decisions. The purpose of this article is to consider the gradual integration of digitalization into the field of accounting for both small and medium-sized businesses, and also to consider its impact on the business processes of organizations. The main objective of the article is to consider the introduction of digitalization into business processes and possible problems during its integration, as well as to identify ways to eliminate them without losses for both the state and small and medium-sized businesses. Methods: In the course of writing this article, a dialectical approach was mainly used, which made it possible to examine in detail the process of reflecting and controlling document flow when moving goods in the context of digitalization. Approaching the issue theoretically and summarizing practical experience, it was possible to identify the positive and negative aspects of accounting and control of the movement of goods on the territory of the Republic of Kazakhstan and beyond its borders in the conditions of rapidly developing digitalization. Results and their significance: This article reflects the main directions of modernization of accounting and operational accounting in Kazakhstan in the context of the progressive digitalization of the economy. The necessity of creating an information environment for managing economic processes and optimizing the operational activities of an enterprise is substantiated, and the positive and negative aspects of the integration of various information systems and modules for maintaining accounting and operational records at an enterprise are considered

Main problem: digital transformation of Kazakhstan’s society leads to emergence of new communication business models, including the so-called proactive data-based service, which implies expansion of communication contact between the state, business and society. Digital transformation of economic sectors and the service sector has objectively caused discussion of issues related to various aspects of its implementation. These include digitalization of society spheres within framework of public administration [1], problems of interaction between business and government [2], mechanisms of interaction between subjects in the private-public partnership model of government and business [3], description of communication models of business types, government and public sector [4], history of emergence of electronic trade, its forms and types of goods delivery to a consumer [5], organizational and managerial relations and processes arising in enterprises, working in field of online marketing and e-commerce [6]. In Kazakhstan, digitalization of spheres and the economy sectors is one of strategic priorities of its development. Use of information and communication technologies in the service sector creates additional impulses to its dynamics, therefore, has impact on improving population’s life quality. In this regard, it is necessary to identify trends and patterns of communication interaction between the state, business and society, to consider and clarify their content. The purpose: the research of state and trends in the development of Kazakhstan service sector under the influence of digital solutions and expansion of communicative contact between the state, business and society. Methods: the performed analysis in the research is based on the materials of the statistical reviews and their analysis using the methods of grouping, generalization, logical analysis, system description and interpretation. Results and their value: a range of the key problems of communication interaction between the state, business and society is investigated and determined. Recommendations are proposed to accelerate the development of e-commerce in Kazakhstan as a tool for communication interaction between business and society and improving population’s life quality.

Main problem: Monitoring the reliability of the foundation of roads, buildings and engineering structures is an important aspect of geophysical research. Modeling of geological heterogeneities is relevant. Moreover, the use of computer modeling in this problem is associated with computational costs. Purpose: Analysis of the vertical electrical sounding (VES) method for modeling the physical properties of soil and their changes when exposed to elastic vibrations. Methods: To achieve the goal, the vertical electrical sounding (VES) method was used, using a one-dimensional model of the geological environment. The direct VES problem was solved by calculating the Hankel integral. Results and their significance: The study made it possible to model a large number of soil layers using the VES method. The results obtained make it possible to determine the parameters of detected objects and changes in the characteristics of the controlled environment when exposed to elastic vibrations. The significance of the results lies in the possibility of improving the method for modeling the physical properties of soil and taking into account their changes under the influence of elastic vibrations, which helps to increase the efficiency and accuracy of monitoring the reliability of the foundation.

The development, grovth and productivity of livestock depend primarily on providing it with a variety of nutritious feeds. Daily feeds should consist of microbiologically synthesized protein, as well as a variety of seeds, mineral and vitamin supplements of animal and vegetable origin. Indeed, the maximum disclosure of the genetic potential of livestock largely depends on both the quantity and quality of feed. One of the stages of feed quality assessment is the measurement of their chemical composition. The chemical composition is not always constant and depends on many factors, including the species composition of plants, fertilizer application rates, climatic conditions and storage methods. The least accumulation of moisture in the soil was observed in areas where pasture grasses were regularly treated with wormwood. Pacture productivity was also the lowest in the control plots, where the average phyto-chemical composition over three years showed that the dynamics of protein content was the same in all pastures – the protein content reached a maximum at the beginning of the growing sea son and decreased from spring to autumn, while the lowest content of crude protein during harvesting in summer was in control plants of varieties

Main problem: the article raises the question of the need to create innovative methods and models of functional-system thinking and pedagogical cultivation of students' intellectual abilities to improve the quality of education. Emphasis is placed on the development of reflexive, schematic, organizational and communication abilities. Purpose: to provide an overview of the basic theoretical concepts

The main problem: the article examines the development of cognitive abilities of high school students by conducting a theoretical analysis of philosophical, pedagogical, psychological, scientific and methodological works and current directions of its development. Improving the educational process in secondary educational institutions and developing the cognitive abilities of high school students is an urgent problem. Therefore, the task arises of developing the thinking and activity of high school students while studying in secondary educational institutions, teaching them to use their knowledge and skills in new life situations. The implementation of these tasks makes it urgent to search for ways and forms of organizing the educational process, which will contribute to the formation of the skills to plan and organize the cognitive activity of high school students. Purpose: to substantiate the general logical coordinates and methods of reformatting various humanitarian paradigms used in action. Methods: ontological principle of logic with genetic content, method of transforming specific images of objects based on their abstract meaning, method of transition from abstract to concrete language, language of thinking of schematic images of thought and language of methodological theory. activities. Currently, such an update represents a transition to the methods and tools of active learning technology as a means of continuous development of science and school practice, the use of which in most cases helps to increase the interest and activity of adolescents. The results and their significance: logically substantiated universal abstract-concrete coordinates of the universal movement are presented. In relation to life and the world of activity, they can be defined by the coordinates: “standard of living - activity efficiency”, or “action efficiency - time”, or “result - costs”, or “quality - quantity” etc. Clarity of thinking is ensured by the logic of movement vectors descending from the real to the abstract, ascending from the abstract to the real, as well as their combination. The constant need for cognitive activity creates in students a feeling of cognitive satisfaction, seeing the result of curiosity, its planning and organization. This result teaches the teenager to actively seek new cognitive activities and gain experience in mastering the subject.

The main problem: Today, the introduction of inclusive education is becoming one of the priorities of the state policy of the Republic of Kazakhstan in the system of modern education. In accordance with the law on Education, equal access to quality education for citizens is guaranteed, taking into account their intellectual development, psychophysiological and individual characteristics. The article is devoted to the analysis of the development of inclusive education. The author considers the problems on the way to the introduction of inclusive education, provides an analysis of the experience of conducting an IT school within the framework of inclusive education. An attempt has been made to identify the factors contributing to the successful implementation of inclusive education methods in the modern educational space. Objective: To consider the issues of the development of inclusive education in the Republic of Kazakhstan. To present the methodology of teaching children with special educational needs, to suggest possible ways to solve problems on the way of introducing inclusive education into the domestic education system. Methods: The methods of analysis, synthesis and deduction were used in the article. Results and their significance: Based on the results of the work carried out aimed at identifying the main problems hindering the process of implementing inclusive education, as well as based on the results of the analysis and the identified main aspects in the cognitive activity of children with hearing and speech disorders, the author of the article proposes a methodology for teaching children multimedia technologies. In addition, the author clearly substantiates the need to prepare a teacher for the use of inclusive education methods, due to the lack of willingness of some teachers to teach in a class (group) in which people with disabilities study, fearing to get into a situation of psychological and professional discomfort.

The main problem: In modern conditions, the healthcare system of Kazakhstan is going through changes aimed at providing a high level of medical care and maintaining the health of the population. In the face of modern challenges such as technological innovations, demographic changes and global pandemics, it becomes critically important to analyze and adapt to new requirements. Understanding and adapting to these trends are critical steps for the successful development of the healthcare system in the future. This article examines the main trends in the development of the healthcare system in Kazakhstan and their impact on the provision of medical services and the level of public health. The article focuses on the essence of the main problem facing the healthcare system of the Republic of Kazakhstan at the present time. The relevance of the topic is manifested in the context of a dynamically changing socio-economic environment, which puts pressure on the existing health care system. Demographic changes, the growth of chronic diseases and the need to introduce modern technologies create challenges that require a comprehensive analysis and effective strategies for the development of the system. Purpose of the article: The purpose of the article is to analyze and systematize the main trends in the development of the healthcare system in Kazakhstan, taking into account current challenges and changes in the global healthcare paradigm. The authors seek to identify key areas of development, as well as provide practical recommendations for improving the system. Methods: The study is based on a comprehensive methodological approach, including analysis of health statistics, economic analysis of expenditures and financing, as well as a review of modern scientific publications. Additionally, methods of comparative analysis with international health standards are used. Results and their significance: The article identifies not only the main problems in the healthcare system of Kazakhstan, but also provides analytical results expressed in the form of identified development trends. The work is important for developing strategies to improve the quality and accessibility of medical services in the country. The recommendations proposed by the authors can serve as a basis for making effective decisions in the field of healthcare in modern conditions.

Main problem: At the present stage of life, workforce plays a special and very important role in the activities and development of any organization. Human resources need to be managed. Management itself is a process of streamlining, regulating a particular activity. Managing an organization means defining the main directions of its development, setting goals for it and contributing to their achievement. Human resources are the face of a company, a component derivative, without which its existence is impossible. Any promising and self-respecting company assigns the formation of its staff to one of the leading directions of its own policy. Currently, in the context of social and economic transformations, the management of the activities of healthcare organizations is changing significantly, and therefore it is necessary to improve personnel management approaches that contribute to improving the quality of services provided and labor productivity. Taking into account the peculiarities of personnel management of a medical institution at the present time, the issue of reforming the personnel policy of healthcare, improving the image of institutions, forming a corporate culture, developing and implementing criteria for the motivational process is acute. Solving these tasks will help managers in the personnel management process. Purpose of this article is to assess the state of human resources of organizations of the sanitary and epidemiological service in the Republic of Kazakhstan and identify the main problems in the personnel management system of the organization using the example of the activities of the State Institution “Committee for Sanitary and Epidemiological Control of the Ministry of Health of the Republic of Kazakhstan”. Methods: The work used general scientific methods of comparative systemic, vertical and horizontal analysis, structural and functional the method, analytical techniques, economic and statistical research methods. Results and their significance: the authors have defined the human resource management system of a healthcare institution, analyzed the current personnel management system using the example of the State Institution “Committee for Sanitary and Epidemiological Control of the Ministry of Health of the Republic of Kazakhstan”. The assessment of the state and movement of labor resources of the Sanitary and Epidemiological Control Committee was carried out. Based on the conducted research, the authors identified the main problems of human resource management of a healthcare institution and developed proposals that can be used as recommendations for further reform and development of the personnel management system in the healthcare sector.

Main problem: One of the priority directions for improving the management system at the enterprise is the organization of effective interaction between strategic and operational management through the formation of a mechanism for their interaction, orienting operational management to achieve strategic goals and objectives. In market conditions, issues of interaction between strategic and operational production management are particularly relevant, allowing solving complex economic problems of the enterprise related to the rational use of resources involved in production, reducing production costs, improving the quality of products, optimizing production potential in order to increase the efficiency of the entire enterprise as a whole and its structural divisions. The role of the mechanism of interaction between strategic and operational production management also lies in the possibility of coordinating those final strategic goals that the enterprise strives for with the actual internal production capabilities. The purpose of this article is to study the issues of interaction between operational and strategic management of an enterprise in a market environment. The theory and modern practice of production management in a competitive environment show that the implementation of operational production management is a natural stage in the implementation of strategic management, therefore, there is a close relationship between them, which manifests itself in their interaction. Methods: The methods of analysis and generalization, the method of systematic and comparative analysis, structural and functional method, economic and mathematical methods, graphical and tabular method were used in the work. Results and their significance: the authors consider the theoretical aspects of the relationship between strategic and operational production management at an enterprise in a competitive environment. There is a low level of compliance of operational tasks of production with the strategic goals of development of domestic enterprises and the special role of information systems designed to link operational and strategic management tasks together. Accordingly, the key aspects of information technology implementation are investigated, including the need for employee training, strategic communications planning, information flow management and the use of data analytics. Examples of successful application of information technologies in various industries and organizations are given.

The main problem: The development of theoretical aspects of legal education, legal awareness. Organizational forms of legal education. Forms and methods of education of legal awareness, legal culture. Features of the formation of legal culture in the modern period. Problems of improving legal culture and legal education. Legal education forms a sense of confidence and independence in the legal sphere among the population of the state, thereby stimulating the legal activity of an individual, which presupposes voluntary, conscious, proactive, socially and morally responsible human behavior. Purpose: The article deals with the legal education of modern youth. The means of forming a legal culture are the promotion of law, the development of legal knowledge among citizens, the practical strengthening of the rule of law, the presence of a strong legal science, the improvement of the system of legal acts, which is achieved due to the presence in the state of a democratic, effective constitution and high legal and technical-legal quality of laws and by-laws. Methods: Methodology of the study. The methodological basis of the study was made up of: generally recognized methods of scientific research of the phenomena of reality in their interrelation and interdependence both at the theoretical level (systemic, comparative legal, formal legal, historical methods of analysis, etc.) and at the empirical level (statistical analysis, questionnaires, research of documents, printed publications); the main provisions of the theory of criminal law, ethics, philosophy, psychology; rules of formal logic. The results and their significance: In this regard, there is a need to create a Republican Center for Legal Education at the Institute of State and Law, which will provide scientific research on the problems of legal education and upbringing, the development of the content and methodology of legal education at all levels of continuing education of students.