Analysis of use of information resources is directly connected with the formation and evaluation of system of indicators of organizational and structural capabilities, material and technical level of ensuring information activities, information capacity of personnel, the quality of information provision of administrative activity.

The article is devoted to the issues of residential buildings`s reliability and durability. The paper deals with the challenges in the estimation of a technical condition of frame filling bearing walls, presents the comprehensive survey methodology for buildings. The article announces the questions on physical and moral wear of frame filling bearing walls.

The results of social and Pavlodar economic capacity analytical assessment are considered in the article. The social sphere and its development is a main direction of economy state regulation. Its state is mainly determined by processes of labor resources, their quantity and quality, level of productive power scientific and technical development, cultural and spiritual life of society.

The article is devoted to the theoretical analysis of the causes of deviant behavior in the formation and development of the individual student teenager in technical and vocational education, the authors offer recommendations for college’s psychologists. In this paper we study the causes of deviant behavior among adolescents identified the following socio -psychological factors stabilizing behavior: the role of the family, spiritual and moral traditions, the internal psychological state of a teenager, his attitude toward the world.

In this article the questions of quality assurance in modern construction, quality control of construction materials, methods of control testing of structures, and also the reasons of defects occurring during manufacture of works.

Scientific bases of normalization and the organization of work are determined, the basic conditions of development of the technically substantiated norms of expenses of work with application of the basic kinds of normative supervision are considered.

Pedagogical conditions to use a learner-centered learning technology in the vocational education of students based on the work experience of the Agrotechnical University in training future specialists of different educational systems are considered in the article. The organization of students’ learning activity based on learner-centered learning technology application has a significant influence on students’ personality development in the vocational education of students. The analysis of famous scientists’ concepts in this field as well as the analysis of traditional and modern paradigms in education is presented in the article. These directions make a contribution to determination of positive pedagogical conditions for a learner-centered learning technology.

The building contain, contain is one of the basic meaning of the development of the person and the forming of his basic culture. The authors searched the incompatibility between the definite aims of the building and the curriculum and between the curriculum and the pupil’s book. In this article the working curriculum at the Oktyabrsk secondary school with due regard for the variation components and with due regard of the pupils’ age feature and the material and technical basis are considered. There is also the explaining of the curriculum organizing in this article. During the selection of the contain of the variation components the common didactics criterions which are formulate by Y.K. Babanskiy are suggested like the base.

In the article, on the materials of the Communal state enterprise on the right of business «Aktogay central district hospital, the problems of staffing provision of healthcare sphere institutions of Pavlodar region are considered. The article gives the analysis of the current state of the problem and the ways of its solution, including mechanisms of state support and regulation.

In the article different methods of diagnosis of failures of electric equipment which are most often found in the industry today. The classification of methods for diagnosing motor failures is presented, and the advantages and disadvantages of existing methods for diagnosing failures in electric equipment are revealed. Based on the description of the methods of diagnosing electric equipment failures, a comparative table was compiled. Analyzing the comparative table of methods for diagnosing failures of electric equipment, the most current method for diagnosing the technical condition of the electric motor was determined.

The article presents new tools for managing labour safety to conduct behavioral safety audits, transforming meetings and labor protection councils into cascade committees, to implement technical and safety standards, and to use new assessment and motivation system and methods of internal incidents investigation.

Gellants are food additives used to increase the dencity and create a certain structure of the food product. In the dairy industry, there is an active work at developing new technologies for fermented milk products, which allows improving organoleptic quality indicators with the use of gellants. In this article, an analysis of the assortment of gellants used in the dairy industry was analyzed.

The purpose of the work is the creation of an information system that allows to carry out activity on accounting and keeping statistics on the means of measurement used in production. An analysis of the use of such a system at a number of large industrial enterprises is performed. The database and the program working with a database of means of measurement on required technological positions and maintenance are developed. The program provides graphs on the accumulated statistical data.

The main provisions of the road quality management concept are outlined, as well as the tasks are defined that need to be solved in order to ensure the management of the system at three levels: strategic, tactical and operational.

The article considers basic principles and approaches for creation of an electronic textbook, the stages of introduction of information and communication technologies in the learning process. The main stages of creating an electronic publication in accordance with the requirements for the development of a modern textbook are presented.

The article analyzes the system of development, design, storage and operation of normative and technical documentation in regional university. Measures are proposed to improve the quality control of normative and technical documentation, including a project to improve the quality control of technical documentation.

Annotation. Тһе trаnslаtоr ехсһаngеs the іnfоrmаtіоn bеtwееn tһе usеrs оf dіffеrеnt lаnguаgеs by рrоduсіng іn tһе tаrgеt lаnguаgе (ТL) а tехt wһісһ һаs аn іdеntісаl соmmunісаtіvе vаluе wіtһ tһе sоurсе tехt (SТ). Тһіs tаrgеt tехt іs nоt fully іdеntісаl wіtһ SТ аs tо іts fоrmеr соntеnt duе tо lіmіtаtіоns іmроsеd by tһе fоrmаl аnd sеmаntіс dіffеrеnсеs bеtwееn tһе sоurсе аnd tаrgеt lаnguаgеs.

The article describes the results of the analysis of the state of working conditions at the enterprise and at the site of JSC «Алюминий Казахстан». Deficiencies in the OSH management system have been identified. Measures are proposed to improve working conditions and prevent industrial injuries. These measures will help ensure safe working conditions in the workplace and reduce the risk of occupational diseases

The article identifies and studies various fillers for fermented milk products with increased nutritional and biological value, presents methods of production of serum necessary for the development of a new therapeutic and prophylactic food product. The technical result is to improve the taste, increase the nutritional properties of the product, the introduction of the resulting whey drink fruit and berry additives in the form of syrup

The causes and conditions of crime in the modern world. Abstract. The article discusses the causes of crime, describes the main groups of causes of crime. The conditions of crime – related, necessary, sufficient – were revealed through a detailed study of the causes of the emergence of various types of crime. On the example of the activities of the Department of Internal Affairs of the city of Ekibastuz, a number of organizational and practical measures aimed at stabilizing the criminal situation in the Ekibastuz region are identified, and statistical data on the results of these measures are also presented. One of the results of the study of this problem is to increase the professional readiness of all the structures of the law enforcement system, to create the appropriate material and technical conditions for improving the means and methods of preemptive influence on economic crime as the material basis of crime.

During the preparatory activities for the preparation and conduct of the KShU, the civil defense plans for peace and wartime were adjusted and clarified, the calculations of forces and resources for conducting emergency response activities were refined and their readiness checked. Checked the combat readiness of the units taking into account work in extreme conditions and the provision of personnel with equipped interchangeable clothing. Additional briefings have been organized on compliance with safety measures for fighting fires and performing emergency rescue operations. Autonomous sources of energy supply, stocks of material and technical, food reserves were checked. In general, the forces and facilities of the units of the Service are on daily round-the-clock alert duty and are ready to meet the set tasks for eliminating emergencies and situations at the first alert.

Essential aspects of formation of terminological thesaurus in the field of aluminium industry are considered in the article. It is known that such dictionaries are usually ranked depending on the sphere of their activity. They may include technical dictionaries, phraseological dictionaries, dictionaries of synonyms, polytechnic dictionaries, special dictionaries in different directions, etc. This process of thesaurus formation not only ensures the integrity of the system, but also provides access to its content.

The article is devoted to the task of automating the assessment of the electrical safety level of electrical installations based on the determination of the electrical resistivity of soil layers ρ in specific climatic conditions. The soil ρ value depends on many factors, which can vary significantly during the year. Therefore, the decision was made using modeling based on one of the areas of artificial intelligence: fuzzy logic.

Modern measuring instruments – a technical device, the purpose of which is to measure the unit of physical quantity. But do not confuse measuring instruments with indicators, the main purpose of indicators is to detect the presence of the measured physical quantity. Measuring instruments are an integral part of human life.

The article describes the results of a study of the effectiveness of the standards being implemented in railway transport. A general view of efficiency and standardization was analyzed. It was studied which document regulates the application of standardization in the Republic of Kazakhstan. Further, the international railway standard IRIS «International Railway Industry Standard» was taken as a basis, which, in turn, is based on the international standard ISO 9001. A study of the methods and types of effectiveness of standards was carried out, as well as an analysis of the applied international standard in the field of railway transport IRIS. The purpose of this standard is to create a business management system that allows for continual improvement, with an emphasis on preventing and reducing delivery defects. It is important to note that the effectiveness of standardization is evidenced by examples showing that ignoring standards turns out to be huge losses for a company for a number of reasons, for example, because its products have not been certified for compliance with a specific standard; due to the additional costs of the company for reworking products that are not manufactured in accordance with the requirements of the standards in the country of export. An analysis of the effectiveness of standardization work in the railway industry can be expressed in relative terms of the effects obtained as a result of the application of the standard: for example, in an increase in the level of safety or in economic growth. The basis for determining the actual effect is the actual level of production that existed at the given enterprise before the introduction of the standard. The measures that can be applied in order to increase the efficiency of solving the problems of developing standardization in the field of railway transport have been studied. Such standardization as one of the elements of technical regulation can provide a contribution to economic growth in excess of the corresponding indicators from the introduction of patents and licenses.

This article discusses the issues of ensuring the confidentiality of personal data in the context of the development of the information society. The purpose of the article is to study the problems of ensuring the confidentiality of personal data in the Republic of Kazakhstan in the conditions of digitalization of the economy and society. The methodological basis of this research is based on General scientific methods: philosophical, dialectical, synergetic, inductive, deductive, method of analysis and synthesis, formalization, analogy, materialistic and empirical methods that ensure the integrity and balance of research, as well as a formal legal method that allowed an adequate analysis of the content of the personal data protection system in foreign countries and Kazakhstan. The processes of globalization, information openness and digitalization have set a number of tasks aimed at solving the problems of ensuring information security while maintaining a balance of interests of the individual, society and the state. In this regard, the problems of ensuring the security of personal data turnover on the Internet, today, is relevant for science and law enforcement practice. The current legislation of the Republic of Kazakhstan on personal data does not pay enough attention to issues related to the processing of personal data in information systems. Improving the legislation of the Republic of Kazakhstan in the field of ensuring the security of personal data processing on the Internet is relevant in the framework of implementing the provisions of the Cybersecurity concept («Cyber shield of Kazakhstan»). However, national legislation does not provide specific guarantees against unauthorized collection of personal data. The current legislation of the Republic of Kazakhstan in this sphere of relations contains a number of legislative decisions, but there are legal errors that require timely adjustments, taking into account the borrowing of progressive experience of foreign countries. Special attention in this article is on the study of contemporary threats of violations of personal data, and provided ways to protect them. The authors conclude that, despite the fact that the law of the Republic of Kazakhstan «On personal data and their protection» sets requirements for the procedure for ensuring the confidentiality of personal data, at the same time they are general in nature and need further specification. In addition, there are a number of significant aspects that are directly related to ensuring the confidentiality of personal data, which have not yet received their proper legal regulation.

The right of ownership, like property itself, occupies one of the mainplaces in public life. Statutory regulation of property relations in the Republic of Kazakhstan existed throughout the entire period of statehood formation. Today, property relations are regulated by the norms of various branches of law. But civil law regulation occupies one of the most important places in the system of regulatory regulation. This article deals with a comprehensive analysis of the main legal concepts, such as property, owner, subject of property rights, as well as forms and types of property, the grounds for the emergence and termination of property rights and ways to protect and protect the absolute right of the owner. A certain thing may belong to several persons as common property. In this case, the right of ownership is distributed among several owners (co-owners). The totality of legal norms on common property forms the institution of common property law. The purpose of this work is a comprehensive analysis of the main legal concepts, such as property, owner and subject of property rights, as well as forms and types of property, the basis for the emergence and termination of property rights and the definition of ways to protect and protect the absolute right of the owner. The means of achieving this goal is the study of the works of Kazakh legal scholars, the study of the analysis of practical materials. The article uses the following methods: comparative-legal, system-structural, formal-logical, as well as the method of system analysis. The legislation of Kazakhstan provides for two subjects of State property that have the right to act on their own behalf: the Republic of Kazakhstan as a whole (in respect of property constituting republican property) and the administrative – territorial unit (in respect of property constituting municipal property). That is, in civil circulation, data are carriers of state property rights. Depending on the tasks performed, the State exercises the powers of the owner on behalf of one of the specified entities. The Republic of Kazakhstan and the administrative-territorial unit are not legal entities. However, unless otherwise provided by legislative acts, they are subject to the rules governing the participation of legal entities in relations regulated by civil law. The state and administrative-territorial unit, as special subjects, have all the rights ofsubjects of civil legal relations and are limited in legal personality only by the current legislation.

The article discusses methods for creating smart things, using the example of the use of innovative technologies in the field of materials for clothing and footwear. The factors of form formation are substantiated by the example of the preferences of an individual customer who forms its image through accessories and shoes. The author considers the factors of shaping, based on the special functional features of shoes in connection with ergonomic factors. The designer is able to foresee the factor of transformability in modern footwear, changes in functional qualities, appearance, and design features of new footwear. As a result, on the basis of these transformations, to get a new emotional image and a new form. The shape of the shoe becomes a factor for transformations at the request of the customer. The article discusses the functional tasks of this shoe, plastic characteristics, technical and design tasks. As research methods, the article proposes variants of experimental models with possible stages of transformation, presents preliminary technical data, conducts a comparative analysis with innovative footwear samples of famous world designers, and makes assumptions about the development of this model in the future. An experimental method was used during the study. A shoe shape was developed, which took into account the preferences of the age group of 12-16 years old, relying on this category of consumers, we were able to go beyond the rational understanding of shoes as a functional form and gave it the meaning of a fantastic image, which allowed us to consider the form in the semantic and artistic context dictated by this age group of consumers. In addition, investing in this model the concept of "smart shoes", we considered not only the ability of modification and transformation by rearranging replaceable parts, the possibility of designing and reincarnating from one form to another, combining the constituent elements of the shoe into one whole, but also the development of the creative potential of the consumer, who at its own discretion can rebuild the structure and, in fact, as a designer itself, form a new model. The article makes assumptions about its further development in various fields of activity. For example, medicine, sports, art, etc. Considering the introduction of new materials, we relied on discoveries in the field of nanotechnology and considered among the possible features of this model the change in color on the basis, the reaction of materials to light, temperature, etc. The project is aimed at creating such shoes that will be developed for a wide range of consumers thanks to the wide range of possibilities contained in the design of the form and the features of modern materials.

Main problem: The article examines promising directions in the production of fortified food products in Kazakhstan and Russia. The authors carried out an analytical review of the current state of production of fortified bakery products on the territory of the Russian Federation and the Republic of Kazakhstan. Anemia has been described as one of the most common consequences of micronutrient deficiencies. The problems associated with anemia lead to serious complications for the health and well-being of people. Lack of folic acid and vitamins in the diet is the cause of cardiovascular disease, maternal and child mortality. Purpose: The article considers the problem of significant deviations in nutrition of almost all groups of the population of Russia and Kazakhstan, regardless of lifestyle, habits or income level, which have an extremely negative effect on the health of the nation: the average life expectancy decreases, the productivity of the working-age population and resistance to diseases decrease. Methods: Based on the studied domestic and foreign technical literature, patent information, an analytical review of the current state and prospects of the production of fortified food products in the Russian Federation and the Republic of Kazakhstan was carried out. Results and their significance: The authors have shown that food fortification is the practice of purposefully increasing the content of vitamins and microelements in food to improve the nutritional quality of food and have a positive effect on human health. The authors considered the question of how the problem of micronutrient deficiency, including iron, is currently being effectively solved in many countries by enriching food products of mass consumption with vitamins and minerals.

The Kazakhstani manufacturer has repeatedly faced situations when pseudo-enterprises, disguising themselves as domestic producers of goods, works and services, received preferences and used government support measures, won government and other purchases, while not having enough equipment for production. The article is devoted to current problems and prospects for the application of the Industrial Certificate in the Republic of Kazakhstan. The dynamics of the development of the sphere of public procurement of the Republic of Kazakhstan is considered, depending on the specific requirements for certain areas of production of goods, works and services. The material in this article is important from the point of view of ensuring fair competition between competing enterprises in the same industry. The complex of transformations in the system of standardization, certification and quality management has been carried out since the first years of independence of the Republic of Kazakhstan. These transformations have been observed over the years, vivid examples of which are: the application of the European model of technical regulation to the modern realities of the economic situation in the Republic of Kazakhstan, accession to the Customs Union, the adoption of unified technical regulations of the Customs Union, the introduction of new regulations and legal acts defining the share of local content in products and services, as well as the potential of domestic industries. The results of these transformations have proved that the system of technical regulation of the Republic of Kazakhstan is an effective tool for the development of the economy. The development of new Kazakhstani normative legal acts and normative documents introduced to support the domestic producer of goods and services will contribute to the transformation of the old system and the creation of a new one that is fundamentally different from the previous one. The article discusses problematic issues in the field of industrial certification, namely: a lack of qualified personnel; unregulated pricing system for work carried out in this area; the complexity of the industrial certification procedure; a lack of automation of processes of the industrial certification mechanism. Analyzing the practice of industrial certification, this article offers recommendations for solving the above problematic issues. New edition of amendments and additions to the «Rules for the formation and maintenance of the register of domestic manufacturers of goods, works and services, as well as the issuance of an Industrial certificate» approved by the decision of the Presidium of the National Chamber of Entrepreneurs of the Republic of Kazakhstan «Atameken» dated 28.12.2018. No. 28 is designed to reconstruct the process of obtaining the Industrial Certificate. The process should become more transparent, understandable and highly efficient. Also, with the introduction of changes, the problems that hindered the receipt of the Industrial certificate by individual enterprises should be resolved.

Currently, close attention is paid to industrial safety at hazardous production facilities. Compliance with industrial safety requirements is directly related to the risks of accidents that can lead to man-made disasters, negatively affect the health and life of the population. As in any other industry, there are problems in ensuring industrial safety. There are several reasons for this: the backlog of standards from scientific and technological progress, the exclusive competence of state authorized bodies, and the lack of a risk-based approach. After the collapse of the USSR, the requirements of industrial safety in the Republic of Kazakhstan have practically not changed: laws and statutory instruments (hereinafter-the LSI) are approved and put into effect, after which they are constantly changed and supplemented; the presence of national and international standards, which, in fact, are revised on the basis of the USSR standards, taking into account the influence of the realities of the time. It can be concluded that the current standards are not focused on the future, scientific and technological progress, innovation, so they are constantly undergoing changes, thereby adapting to the necessary requirements that dictate modernity. State regulation does not contribute to the effective development of industrial safety. This is due to the fact that the state performs exclusively supervisory functions (thus it is exclusively educational in nature), and there is no dialogue between authorized state bodies, expert organizations, scientific organizations, and testing laboratories. If we consider the experience of the Russian Federation in the field of industrial safety, then it makes no sense to accept even some experience, since: similar to the Kazakhstan’ LSI and regulatory and technical documentation (and their constant dynamics), the development of cooperation with the Russian Federation within the framework of the Eurasian Economic Union. Accordingly, it is advisable to consider the experience in the field of industrial safety in Europe and the United States of America because of the effectiveness of regulation and supervision than in the Republic of Kazakhstan and the Russian Federation. This article provides information about international experience in the field of industrial safety in the United States and the European Union. The tasks of state regulation in the field of industrial safety in the Republic of Kazakhstan, the Russian Federation, the United States, and the European Union are described in detail. The analysis of normative-legal acts and normative-technical documentation is carried out. Based on the analysis of international experience, solutions to problems in the field of industrial safety for the Republic of Kazakhstan are essentially presented. The purpose of this article is to reveal the problem in the field of industrial safety in the Republic of Kazakhstan and international experience that the Republic of Kazakhstan can borrow in order to effectively ensure industrial safety. Study of international experience (USA, EU countries, Russia) in the field of industrial safety in terms of: analysis of standards; regulation (control and supervisory functions) to ensure safety. The results of this article will reflect the problems that hinder the effective provision of industrial safety in the Republic of Kazakhstan and essentially suggest ways to solve them.

The specifics of the management of healthcare institutions are due to the fact that healthcare is a special field of activity that differs significantly from other types of activities. One of the most important management tasks in the field of public health protection is the achievement of targets: improving the quality and accessibility of medical care through the effective use of limited financial, material, labor and other health resources in conditions of rapidly growing competition in the medical services market. The purpose - is to review and summarize the domestic and foreign experience of management in health care. The article emphasizes that the serious institutional transformations taking place in the domestic healthcare system in recent years are aimed at improving the quality of medical services in the implementation of the state guarantees program, at switching to a single-channel model of financing medical care, at introducing the principles of result-oriented budgeting into the activities of socially oriented organizations providing socially significant services. The practical implementation of the above innovations requires a revision of the concept of management in the field of healthcare, the priority areas of which correspond to the best world practice. The preservation of the health of the nation is a strategic guideline of state regulation in the field of healthcare, which determines the targets of state policy. When writing the article, traditional methods (comparison, description, measurement), general logical methods and research techniques (analysis, generalization, etc.) were used. The article discusses the main theoretical foundations and organizational and economic mechanisms of the healthcare management system in market conditions. The author notes that effective healthcare is a significant factor stabilizing the socio-political situation at all the above-mentioned early stages of the reform. Therefore, studies of economic relations in healthcare in the transition period, the role of innovation policy in the management of healthcare institutions are becoming relevant. At the same time, issues of the effectiveness of the functioning of healthcare institutions are of particular importance, which are ultimately determined by the creation of socio-economic, scientific, technical, organizational and economic prerequisites for the progressive development of productive forces using the achievements of scientific and technological progress, the latest medical technologies.

The article presents a method of teaching object-oriented programming to students of the educational program «Computer Engineering and software» using the project method. The problem of the insufficient level of organization of the educational process in colleges, aimed at studying any kind of object programming, is investigated. In this regard, the important aspects that must be taken into account when constructing a methodology for teaching object-oriented programming, aimed at enhancing the cognitive independence of students, are described in detail. It is shown that the solution to this problem largely depends on the degree of achievement of the learning goals of students specified in GOSTiPO, as well as on the methodological guide to object-oriented programming, developed in accordance with the requirements of modern education. An analysis was made of the State Compulsory Standard for Technical and Vocational Education of the Republic of Kazakhstan, the Model Curriculum and the Working Curriculum in the discipline "Fundamentals of Object-Oriented Programming" for students of the educational program "Computer Engineering and Software" and the teaching methodology developed on their basis. The purpose is to substantiate the methodology for teaching students object-oriented programming, which activates cognitive activity through the use of the project method and its practical application in the educational process. Methods: The methods of analysis, synthesis and deduction were used in the article. Results and their significance: The practical result of the analysis was the method of teaching college students object-oriented programming, using the project method, which is necessary for a more intensive development of cognitive independence. The practical significance of the results is to increase the efficiency of studying the discipline by taking into account the individual characteristics of students.

Main problem: It is very important for each company to obtain an industrial certificate, which makes it possible to get into the Register of Domestic Manufacturers, as they expect to receive large orders. With the receipt of an industrial certificate, their prospects for participation in various tenders and purchases will significantly increase, where they can show their abilities, compete with domestic producers, and also have an advantage over importers. Since July 1, 2019, the industrial certificate has become mandatory for participation in public procurement. Corresponding changes to the rules for public procurement were made by the Ministry of Finance of the Republic of Kazakhstan. Taking into account the experience of the «Rules for determining the country of origin of goods, issuing a certificate of origin of goods and canceling its validity», approved by Order of the Acting Minister for Investment and Development of the Republic of Kazakhstan dated February 24, 2015. No. 155», it becomes clear that the document does not take into account a number of «narrow» specifics of individual industries. Purpose: development of amendments and additions to the «Rules for the formation and maintenance of the register of domestic producers of goods, works and services, as well as the issuance of an Industrial Certificate» for the subsequent possibility of obtaining an Industrial Certificate by a chemical industry enterprise for the production of mineral fertilizers. Methods: study and analysis of literary sources, statistics and modeling of the procedure for issuing an Industrial Certificate. Results and their significance: the problems of application were studied, ways to solve these problems were found, and amendments and additions to the “Rules for the formation and maintenance of the register of domestic producers of goods, works and services, as well as the issuance of an industrial certificate” were developed. At the moment, the Rules need to be carefully finalized. It is necessary to consider this issue together with authorized state bodies, associations and business representatives, since obtaining an Industrial Certificate will directly affect participation in public procurement, and, accordingly, the economy of the Republic of Kazakhstan.

Main problem: recently, much attention has been paid to energy saving in production, especially when it comes to industrial units that burn fuel. There are several ways to maximize the use of the heat released during the combustion process, for example, to reduce the temperature of the flue gases at the outlet of the unit, by maximizing its use, both in the technological process itself and by installing additional heat-receiving units, for example, air heaters or other heaters. Another way to save money is to reduce heat losses through the lining of these high-temperature units. Metallurgical units that consume a large amount of energy and fuel require an analysis of their consumption, and ways to save their consumption based on the results of the analysis. Purpose: this article considers the possibility of replacing the existing inner insulation layer of the second and third sections of a high-temperature unit - a metallurgical furnace, with a new one with better technical and economic indicators. Methods: the possibility of replacing the existing inner insulation layer of the second and third sections of the high-temperature unit with a new one, with the best technical and economic indicators, was considered. The calculation of heat losses by thermal conductivity through the side surfaces and the roof with new insulation was performed, and the economic efficiency of the proposed solution was proved. Results and their significance: replacing the existing inner layer of insulation - refractory concrete PHLOCAST M30 (thermal conductivity coefficient from 1,4 to 1,45) with the proposed CERALIT GUN HK 70070 (thermal conductivity coefficient from 1,03 to 1,12) will reduce heat loss to the environment, and thus to reduce fuel consumption for the furnace.

In order to successfully conduct agricultural work and obtain a competitive harvest, it is mandatory to carry out spraying operations of crops that require highly qualified personnel, expensive equipment and suitable weather conditions. The use of tractors for spraying fields is the most common solution available at the moment, has disadvantages: high cost, risk of damage to the crop by "hitting", "hooking" or otherwise; environmental damage; due to exhaust gases, the demolition of the solution increases with increasing speed. Using a device designed specifically for spraying equipment is an ideal solution. The purpose of the article is to develop a working model of an automated sprayer for processing agricultural crops. The methods used are: technical justification of a controlled device for processing agricultural crops. Calculation of functional capabilities, algorithms of operation of the proposed automated device: selection of the type of sprayer, engine, chassis, controller, battery, as well as justification of the possibilities of using alternative energy sources (wind energy, solar energy); development of a 3D model of an automation device for anti-weed processing of agricultural crops, printing of parts, assembly of mechanical and electronic parts. Making a prototype using 3D printing; development of the wiring diagram of electronics, software (firmware of the microcontroller; application that controls the settings), testing of the prototype, assembly of the current model; rationale for the optimal use of Arduino and Raspberry Pi boards in this device in a pair: Raspberry Pi will allow you to control processes on the Arduino and easily interact with the Internet when the Arduino itself will perform simple operations such as interacting with electronics and reading sensor readings. The manufactured operating model showed compliance with the goals, a high degree of controllability, environmental friendliness, reduction of energy consumed, labor resources and can be used to scale this device. The developed model of the automation device for anti-weed treatment of agricultural crops can be used not only in agricultural pollination, but also as a mechanism for studying soil parameters: humidity, mineralogical composition and chemical content in the ground, using electronic sensors, as well as an automated mobile platform for any purpose requiring accurate navigation through the territory.

Main problem: processes of economic modernization in practical solution should reveal common understanding between institutional, legislative and industrial relations, essence of organizational transformations, formulation of basic provisions for instrumental support of independent transition of technological processes to new round of socio‑economic relations. Processes should be based on new characteristics of standardization, methodology of system functioning, technical conditions, norms, rules, instructions and regulations, which provides for institutional changes. Purpose: to explore new trends in digital transformation of the world economy, as well as to show that tasks and settings of vector of technological processes of digital economy go far beyond known principles of economic development, joining the mainstream of global trends. Methods: theoretical and methodological basis was concepts, hypotheses and theories presented in works of domestic and foreign researchers. The methodology is based on systematic approach, in which methods of comparative, factorial, subject-object, structural-functional, statistical, correlation analysis and extrapolation were applied. Results and their significance: analytical review of theoretical approaches of foreign economists on this problem was carried out, which allowed author to identify theoretical, methodological and applied foundations for determining directions within framework of state strategy for planning socio-economic development. Scientific discussion on conditions for changing model of economic development, modernization of economy with transition to first and second generation platforms, hereinafter referred to as ecosystems, is evaluated. The fundamental differences between theoretical argumentation of proponents of promoted digital technologies and their opponents are determined. Positions of argumentation of impact on change of driving factors are analyzed in order to adjust methods of state policy and choice of vector of technological processes. The question of correlation of macroeconomic theory in evolutionary sense, which goes beyond known principles of economic thought of digital transformation, is considered.

In recent years, the Republic of Kazakhstan has maintained an ambiguous criminal situation, and there is an increase in certain types of crimes, against the background of the overall positive dynamics of decline. Special attention of criminologists has recently been attracted to the study of crimes in the family and household sphere, and crimes committed in the sphere of religious and spiritual relations, since both of these types are showing increasing prevalence. Therefore, considering such an important institution as a «voluntary refusal», it would be advisable to consider them from the perspective of the offenses we have named, especially since countering them is one of the main directions of state criminal policy. In general, the study of the institution of voluntary refusal to commit an offense is based not only on coercive measures, but also on incentive measures, which means the opportunity to correct the behavior of the offender until the end of the illegal act. The purpose of this scientific article is to study the features of voluntary refusal to commit a criminal offense in crimes committed in the sphere of religious, spiritual and family-household relations, taking into account practice and making recommendations for improving regulations of a criminal nature. The leading methodological tools of the scientific article are dialectical, phenomenological, synergetic and systematic approaches of scientific cognition. Before proceeding to the analysis of the concept of voluntary refusal, it should be noted that the norms about it are far from perfect. There is no unambiguous understanding of the signs of voluntary refusal among scientists, which complicates law enforcement practice. One of the most important tasks of any scientific research is the development of scientific concepts. The consolidation of such concepts in legislation is an effective way to establish a uniform understanding of the norms, a clear idea of their content and, as a result, an increase in the effectiveness of the impact of criminal law in the process of legal regulation. However, these concepts themselves do not reflect reality like contemplation or representation, they are closer to the essence of the phenomenon. The article concludes that the essential features of the concept itself somewhat narrow the objective reality. But, at the same time, the correct identification of the main features in the concept is an important task of scientific research.

The present stage of development of power systems is characterized by the need to increase their intelligence, that is, the formation of an environment capable of solving the problems of effective management of all components included in the power system. One of the features of modern energy systems is an active consumer, that is, a consumer who has the opportunity to optimize the schedule of loading their capacities, planning energy consumption, intellectualization of energy consumption. In addition to the fact that there are digital systems for collecting, processing and presenting information, as well as transmitting this information via the Internet, to solve the most difficult task of managing power systems, it is necessary to develop a large number of models adequate to real processes that can describe the processes taking place in the power system under consideration. The purpose is to develop models capable of adequately describing the interrelated processes occurring in the considered elements of the power system, as well as in the aggregate of related elements; development of methods that allow solving problems of effective control of elements of energy systems on the basis of the proposed intelligent models. To solve the problem of increasing the intelligence of the power system, nonlinear adaptive models of electrical complexes of an energy-intensive enterprise included in the power system were developed on the basis of balance equations and artificial intelligence methods. The production of alumina with the properties of inertia, nonlinearity and closure is chosen as the production under consideration. This type of production was chosen as the most difficult to predict due to the unpredictability of changes in energy consumption during the transition to other modes of its operation, associated, for example, with the receipt of raw materials with a different chemical composition for processing. Static and dynamic models of energy consumption of electrotechnical complexes with continuous inertial nonlinear closed production based on artificial intelligence methods have been developed, which makes it possible to eliminate the need to use long time series of retrospective data. For the considered type of continuous energy-intensive production, dynamic characteristics of energy consumption and technological processes are obtained from the main controlled parameters, which make it possible to predict emergency situations and partly man-made disasters. On the basis of a genetic algorithm, a multiparametric optimization problem of energy management of continuous production has been solved, taking into account technological parameters and cost factors.

Main problem: the article substantiates the relevance of the development and production of specialized food products for athletes and the population involved in sports, fitness as part of a healthy lifestyle. Purpose: development of specialized food products with a general health-improving character, intended for the population involved in sports, fitness and experiencing increased physical exertion. Methods: the obtained results were statistically processed using the methods of correlation and regression analysis and standard software packages "Statistica 6.0". Measurements of chemical, microbiological, organoleptic parameters were carried out using standard methods and modern instruments: an analyzer, an analytical analyzer electrophoresis cell, a high-performance liquid chromatograph, and others. Results and their significance: a scientific concept for the creation of fermented specialized milk-based food products for sports nutrition was formulated; biotechnologies for specialized food products for athletes were developed. For the practical implementation of the results of analytical and experimental studies, packages of regulatory and technical documentation for the production of new products have been developed, which have been tested in the production conditions of existing enterprises in the dairy industry.

Market transformations in the Republic of Kazakhstan and in the regions have entered a phase of intensification: management systems and resource allocation have been fully improved, the institution of public-private property has been formed, the main market mechanisms of economic regulation have been put into effect. The mechanism of self-development of the market as a whole is gradually being launched, small business is becoming crucial. It is free entrepreneurship that is designed to intensify the further economic recovery in the regions of the Republic of Kazakhstan. Balanced and progressive development of small business involves the development of infrastructure that stimulates the activity of its development and requires the transformation of the mechanisms and format of integration of the sphere of small and large business, as one of the fundamental factors of balanced development of small business in the leading sectors of the economy. In the Republic of Kazakhstan, the support of the small business sector is one of the strategic priorities of its development. However, despite the measures taken by the state to provide support to small businesses, the dynamics of needs and industry-specific features of the development of the market of goods and services make their own adjustments to regional trends in the development of small business, forming an industry and structural imbalance in the development of small business, which requires consideration and clarification of their content. Purpose is to study the state and trends of small business development as a factor affecting the efficiency of the economy and social stability of the population. The analysis of small business development in the article is implemented on the basis of the information and statistical base of the Republic of Kazakhstan in the context of identifying trends and patterns of its development; identification, generalization and justification of the reasons for their formative and institutional approaches to their regulation. In particular, the analysis in the study is based on the materials of statistical reviews and their analysis using methods of grouping, generalization, logical analysis, system description and interpretation. The range of main directions and trends in the development of small entrepreneurship in the Republic of Kazakhstan has been studied and determined, their effectiveness has been assessed and tools to support the balanced development of small business have been proposed.

Development of regulatory and technical documentation for the examination of equipment operating under pressure

The main problem: The development of theoretical aspects of legal education, legal awareness. Organizational forms of legal education. Forms and methods of education of legal awareness, legal culture. Features of the formation of legal culture in the modern period. Problems of improving legal culture and legal education. Legal education forms a sense of confidence and independence in the legal sphere among the population of the state, thereby stimulating the legal activity of an individual, which presupposes voluntary, conscious, proactive, socially and morally responsible human behavior. Purpose: The article deals with the legal education of modern youth. The means of forming a legal culture are the promotion of law, the development of legal knowledge among citizens, the practical strengthening of the rule of law, the presence of a strong legal science, the improvement of the system of legal acts, which is achieved due to the presence in the state of a democratic, effective constitution and high legal and technical-legal quality of laws and by-laws. Methods: Methodology of the study. The methodological basis of the study was made up of: generally recognized methods of scientific research of the phenomena of reality in their interrelation and interdependence both at the theoretical level (systemic, comparative legal, formal legal, historical methods of analysis, etc.) and at the empirical level (statistical analysis, questionnaires, research of documents, printed publications); the main provisions of the theory of criminal law, ethics, philosophy, psychology; rules of formal logic. The results and their significance: In this regard, there is a need to create a Republican Center for Legal Education at the Institute of State and Law, which will provide scientific research on the problems of legal education and upbringing, the development of the content and methodology of legal education at all levels of continuing education of students.