This article deals with the impact of chemicals on the degree of recycle water purification, the physical and chemical coagulation process is described and the results of tests that show the effectiveness of these reagents are presented.

The article is devoted to the theoretical analysis M. Doychu species conflicts, conflict structure, developmental stages of the conflict, is also considered rigidity and its ability to influence various spheres of human activity. An analysis of the theoretical material concluded that the performance of the enterprise is important to good social and psychological climate and psychological safety of all participants in the activities of the enterprise.

This article discusses the possibility and practice of Kazakhstani enterprises producing chemical products and raw materials, which are oriented to export regulations REACH, adopted by the European Union that will greatly increase the safety and competitiveness of domestic production.

This article discusses some of the problems of chemical safety, such as the recycling of waste production, chemical accidents and disasters, environmental pollution and the negative effect of the chemical industry on human health, as well as methods for safer handling of chemical products.

In this article describes a new kind of technology development sausage using natural supplements.

The paper dwells on the technology of gallium production and the impact of settling on the physical and chemical properties of rich liquor to be fed to the cementation stage.

In this article it is considered a compliance assessment of developing industrial sectors of the country to the principles of «green» economy based on the example of the petrochemical complex of the Republic of Kazakhstan. Relevance of the research is caused by the need to build «green» low-carbon economy. The implementation of «green» economy concept will be a strong incentive for technological renovation for the numbers of industries. The directions of the «green» economy in the petrochemical industry of the Republic of Kazakhstan have been determined, as well as an analysis of international experience to implement the principles of «green» economy in the petrochemical industry has been carried out.

This article focuses on the adsorption properties of Ni-PEG / ZnO and Cu-PEG / ZnO catalysts. For modern technologies require more efficient and cheaper hydrogenation catalysts. Create them only through the development of new scientific approaches to the preparation of supported catalysts, and most recently modified polymer catalyst as supported on a carrier, and unsupported, involving the study of new physical and chemical methods. To determine the percentage of metal in the catalyst was prepared and investigated the mother solution.

This article views the research methods allowing by the organoleptic and physical and chemical indicators to estimate the honey naturality and approximately determine its origin due to the results of the analyses. The factors influencing the quality of the produced honey have been considered and the chemical Вестник Инновационного Евразийского университета. 2015. №3 ISSN 1729-536X 167 composition of the useful components of honey has been studied. It is shown that Kazakhstani honey can be rather competitive at the world market and the main task is the increase the honey production without changing its quality.

The article is concerned with the analysis of fires in the multi-storey residential houses in Pavlodar. The analysis was carried out on statistical data from 2014 to 2016. Examples of fire analysis in Russia are given.

The main directions of increasing the reliability and electrical safety of power distribution networks are considered in the article. The schemes of the main directions of development and improvement of electric grids are given.

In this article, the migration processes and their influence on socio-economic development of the Pavlodar region are considered. The concept of migrations, factors and types of migration are highlighted.. The demographic cases in the region are studied for research of migration processes and their influence on socialand- economic development of the Pavlodar region. Impact of migration on social-and-economic development of the country can be both positive and negative. The account of these factors is important for adjusting of migration processes and optimal policymaking in this sphere.

The article presents new tools for managing labour safety to conduct behavioral safety audits, transforming meetings and labor protection councils into cascade committees, to implement technical and safety standards, and to use new assessment and motivation system and methods of internal incidents investigation.

The work analyzes the emergency situations that occurred on the territory of the Pavlodar region. The main causes of emergencies of natural and man-made nature are presented. The article contains the results of the analysis of the effectiveness of management in a safety-related system in the Pavlodar region and recommendations for improving the safety-related system during the emergency relief operations.

The analysis of the current management system of labor protection at «Aluminum of Kazakhstan» JSC is provided. Services and departments providing production activities are presented. The basic principles of the management system of labor protectionare considered. The organization of work on labor protection and development of corrective and preventive actions are presented.

This article considers chemical safety as a system of measures aimed at protecting vital human interests against adverse chemical effect from threats of processing, storing and destroying hazardous chemicals. Chemical safety is ensured by a complex of legal, organizational, financial, material and informational measures intended for prevention and elimination of real and potential security risk, mitigation of their consequences.

The article is devoted to the current problem of quality control and safety of dairy products. The article provides a generalized description of the system models, discusses the main problems and advantages in implementing the quality control system in small and medium-sized dairy enterprises.

The article is devoted to risk analysis, methods of ensuring dairy products safety. Furthermore, the author dwells on such tool of quality control as a decision tree. The article presents the plan of HACCP for a diary enterprise on an example of the production a sour cream with 15-20 % of fat content.

Evaluation of the output of lime is made for three options for the use of Ferroalloy gas: when you use the physical heat of the gas; when using the chemical energy of the gas and the location of the reactor after scrubbing; when sharing of sensible heat and chemical energy of the gas. As a result of the calculation of the expected yield of lime, it was found that the use of Ferroalloy gas for the production of lime can fully provide or at least compensate for the deficit of lime in the production of steel. The technology of calcination of limestone with Ferroalloy gas is presented in the form of a cycle synchronized with the smelting of steel, including, in accordance with the gas outlet from the layer and their alternation with pauses of inter-blowing periods. The preliminary technological characteristics of firing obtained as a result of theoretical analysis are used for further experimental and theoretical studies.

This article discusses the evaluation of the effectiveness of disinfectants «Dezosteril» and its derivatives and analogues in the fight against tuberculosis. The emergence of tuberculosis and its pathogens. Namely, «to Dezosteril» and its derivatives produced on the territory of «BO-NA» of Pavlodar city. The main attention is paid to the types and methods of disinfection. Resistance of microorganisms to chemical disinfectants based on peracetic acid (NUK) and hydrogen peroxide.

Аt present, dairy enterprises use a system for analyzing and monitoring critical control points, as well as a quality management system, to produce high-quality and safe products. These systems take into account factors that may affect the production process and other components by identifying hazards from the procurement of raw materials to the consumption of products for food. The purpose of the article is to study the role and necessity of applying quality and safety management systems at dairy enterprises and reducing the risk at all levels of production

The article describes the relationship of man as a species with nature. It is shown that this relationship is determined by the conditions of existence, the quality of air and water, the necessary elements of nutrition. It is also pointed to the role of environmental conditions-optimal for the body, determining human health and life expectancy

The article describes the results of the analysis of the state of working conditions at the enterprise and at the site of JSC «Алюминий Казахстан». Deficiencies in the OSH management system have been identified. Measures are proposed to improve working conditions and prevent industrial injuries. These measures will help ensure safe working conditions in the workplace and reduce the risk of occupational diseases

The study of the structure of matter is one of the main tasks of chemistry. The problem can be solved with the help of graph theory, which allowed us to find an unexpected way to solve our logical problem. Thus, the aim of our article was to master the theory of graphs for constructing the structural formulas of organic compounds. Prediction of chemical reactions, the possibility of systematization and study of the essence of basic chemical concepts, such as structure, configuration of atoms and molecules, confirmation, isomerism, and, undoubtedly, the quantum-mechanical basis of the interaction of molecules, all this is possible using chemical graphs. Graph theory allows a non-standard way to approach the problem of constructing the structural formulas of molecules of organic compounds.

In the work measures on preparation of production personnel for actions in the conditions of emergency situations are considered on the example of Neftekhim LTD LLP. The structure of the control system and its main components were studied, the regulatory legal framework used in industrial safety was described. The possible risks and dangers, as well as harmful substances used in the production of plant products and their effect on the body were studied; the current state of the control system in the field of emergency prevention was evaluated

According to our research, the effectiveness of the biological preparation «Bacticide» to combat blood-sucking insects is 80-95 %. The effectiveness of the application depends on the location of insects and weather conditions. According to the instructions, «Bacticide» is an environmentally friendly development, as the preparation does not contain chemical preservatives. «Bacticide» means has all the permits documentation, it is registered and allowed for use in the countries of the customs union.In the Pavlodar region and in the future it was decided to use the biological preparation «Bacticide» in the fight against the gnus

During the preparatory activities for the preparation and conduct of the KShU, the civil defense plans for peace and wartime were adjusted and clarified, the calculations of forces and resources for conducting emergency response activities were refined and their readiness checked. Checked the combat readiness of the units taking into account work in extreme conditions and the provision of personnel with equipped interchangeable clothing. Additional briefings have been organized on compliance with safety measures for fighting fires and performing emergency rescue operations. Autonomous sources of energy supply, stocks of material and technical, food reserves were checked. In general, the forces and facilities of the units of the Service are on daily round-the-clock alert duty and are ready to meet the set tasks for eliminating emergencies and situations at the first alert.

On the basis of research on bacteriological indicators of the water supply system in the Ekibastuz region for the period 2016-2018 the 310 cases of detection of pathogenic microflora were identified. The chemical indicators are given the results of research to determine the content of toxic elements and heavy metals in the source and purified water, as well as in the distribution network of Ekibastuz. The largest number of pathogenic microflora cases and a high concentration of chemical elements are noted during the flood season. Sporadic pathogenic microflora and chemical elements are also recorded in the winter and summer periods.

The article discusses the mechanisms by which surfactants interact with a glass surface. The need for a preliminary silanization procedure was studied using laboratory glassware in the chemical analysis of lowconcentration surfactants. Rules were proposed for carrying out the silanization procedure.

The article discusses the biotechnological aspects of the use of medusomycete as a producer of chemicals in cosmetology. Organoleptic and chemical studies of a tea drink using various growth substrates were performed.

The article is devoted to the task of automating the assessment of the electrical safety level of electrical installations based on the determination of the electrical resistivity of soil layers ρ in specific climatic conditions. The soil ρ value depends on many factors, which can vary significantly during the year. Therefore, the decision was made using modeling based on one of the areas of artificial intelligence: fuzzy logic.

Among many environmental conditions that affect a person, the most important factor is nutrition. Today, there is no doubt that there is a direct link between nutrition, health and disease. Proper nutrition ensures normal growth and development of a person, contributes to the prevention of diseases, has a positive impact on life expectancy and creates conditions for adaptation to the environment. A very actual topic for public catering in the Republic of Kazakhstan, namely for fast food companies, is the development of new recipes and culinary products from relatively inexpensive vegetable raw materials, as well as qualitatively new food products with a purposefully changed chemical composition. One of the main ways of solving problems of expanding the production of products for quick service, as well as products for dietary and therapeutic and preventive nutrition is the use of sprouted grains and beans. In this article, poly-grain mixtures of sprouted wheat and extruded soy beans in different ratios are studied and considered. Poly-grain mixtures developed by us are balanced in nutrients, vitamins and amino acids. The research was carried out on the basis of the accredited testing laboratory of RUBICOM enterprise LLP and the scientific laboratory of the Innovative Eurasian University. The purpose of this work is to study a promising method for increasing the nutritional value of grain mixtures by extruding them at different temperature conditions. To achieve this goal, the following tasks were planned: – to study the grain of soy beans and sprouted wheat on the organolepti c characteristics and chemical composition of the poly-grain mixture; – examine the chemical composition of the poly-grain mixture before extrusion; – choose the optimal mode of the extrusion process; – study and analyze the chemical composition of poly-grain extruded mixture; It should be noted that we have developed for the first time the optimal technological mode of extrusion of poly-grain mixture from sprouted wheat and soy beans, and the physical and chemical composition of the poly-grain mixture was studied. The results of the research presented in this paper are the basis for the development of recipes and technologies for fast food products. The reliability and validity of scientific statements is confirmed by the choice of modern methods of chemical composition analysis.

The article describes the results of a study of the effectiveness of the standards being implemented in railway transport. A general view of efficiency and standardization was analyzed. It was studied which document regulates the application of standardization in the Republic of Kazakhstan. Further, the international railway standard IRIS «International Railway Industry Standard» was taken as a basis, which, in turn, is based on the international standard ISO 9001. A study of the methods and types of effectiveness of standards was carried out, as well as an analysis of the applied international standard in the field of railway transport IRIS. The purpose of this standard is to create a business management system that allows for continual improvement, with an emphasis on preventing and reducing delivery defects. It is important to note that the effectiveness of standardization is evidenced by examples showing that ignoring standards turns out to be huge losses for a company for a number of reasons, for example, because its products have not been certified for compliance with a specific standard; due to the additional costs of the company for reworking products that are not manufactured in accordance with the requirements of the standards in the country of export. An analysis of the effectiveness of standardization work in the railway industry can be expressed in relative terms of the effects obtained as a result of the application of the standard: for example, in an increase in the level of safety or in economic growth. The basis for determining the actual effect is the actual level of production that existed at the given enterprise before the introduction of the standard. The measures that can be applied in order to increase the efficiency of solving the problems of developing standardization in the field of railway transport have been studied. Such standardization as one of the elements of technical regulation can provide a contribution to economic growth in excess of the corresponding indicators from the introduction of patents and licenses.

The article is devoted to the mathematical modulation of a complex of experimental data obtained in the process of experimental studies of processed cheese products, processed by mathematical methods. The purpose of this study is to establish the type and amount of the melting salt that promotes the formation of the plastic structure of the processed cheese product. The analysis of scientific research in the field of food technologies showed that mathematical modeling is used in the following areas: clarification of the modes of technological processes, design of recipes and assessment of the quality of finished products, as well as forecasting the shelf life of new products when they are put into production. The most relevant in describing the processes of food production are models of multivariate variance-regression analysis using methods of mathematical planning of the experiment. The authors carried out mathematical modeling and established graphical dependencies characterizing the degree of influence of the regulated factors X1 and X2 on the controlled ones that determine the quality and safety of processed cheese products. It is important that the mathematical analysis of the graphical dependences of the rheological parameters on the adjustable factors indicates the reliability of the data obtained. It is concluded that an increase in the melting salt dose leads to an increase in the – limit shear stress, which reflects the nature and state of the consistency of the processed cheese product. The process of normalization of the controlled factors by the maximum value was carried out. Graphical dependencies were built and regression analysis was performed, the results of which allow an objective assessment of the degree of influence of the type and dose of the melting salt on the chemical and organoleptic characteristics of the test products. The authors have proven that the optimal efficiency of transforming the structure of the constituent components of the recipe into a plastic structure of a processed cheese product that is stable during storage is provided by a combination of adjustable factors X1 (Solva 85) and X2 (Solva 120) taken in a ratio of 1: 1, with a total amount of 1,2 mas.%. At the same time, the quality indicators of the experimental products are characterized by the following values of the controlled factors: У1 – 1280 Pa; У2 – 9 points, У3 – 9,301 (2,0-2,2109 colony forming units /g).

Environmental protection measures are based, among other things, on the rationalization of the organization of the production waste management process. Population growth and the race to industrialize pose a serious threat to the ecosystem. Currently, the average global waste generation per capita is 494 kg / year. A large number of industrial enterprises operate on the territory of Kazakhstan. The range of manufactured products is very wide: household items, transport, building materials, equipment and much more. Each type of production is inevitably a source of a large amount of industrial waste, annually at the enterprises of Kazakhstan up to 600 million tons of waste are generated, three percent of which are recycled. On the territory of Pavlodar region there are enterprises in the field of metallurgy, mechanical engineering, chemical industry, construction industry enterprises, light industry, about a hundred in total. In this connection, the problem of treatment and disposal of industrial waste in Pavlodar region is very relevant. The article discusses the system of waste management in order to reduce their impact on the environment, activities for the disposal, transportation, disposal of waste, as well as their disposal at the industrial waste landfill in Pavlodar. The landfill in question is intended for the reception, temporary storage and disposal of non-hazardous solid industrial waste of the «green» level: waste and scrap of chromium, cadmium, aluminum, copper, lead, zinc, manganese, plastic waste, polyethylene, abrasive, rubber waste, ash and ash and slag waste; and also «amber»: waste containing mercury, arsenic, lead, waste batteries, phosphoric slags, waste oils, oil sludge. The scheme of organizing waste storage works is considered. The volume of accepted and recycled waste, as well as those placed at the landfill and used for their own needs, was analyzed, including construction waste, waste sleepers, ash and slag and abrasive scrap. The solution to the problem of industrial waste disposal is associated with the need for innovation and the introduction of new technologies and equipment.

The article is devoted to comprehensive research and development of the technology of cream supplements for the enrichment of processed cheese products. This article discusses the steady trend towards the use of dairy products with probiotic properties in the diet of modern people. The authors justify the requirements for the chemical composition and properties of a new type of processed cheese product: the mass fraction of dry processed cheese product must be at least 45 wt.%, the amount of probiotic microflora at least 107 CFU/g, to adjust the fatty acid composition of the product, the use of milk fat substitutes. As a result of the research, the composition and technological parameters of the production of a cream Supplement intended for enriching a new processed cheese product were determined. Skimmed milk powder concentrate with a mass fraction of dry substances (48.0±0.5) %was selected to increase protein (nitrogenous substances) in the nutrient medium for microorganisms. To activate the growth of bifidobacteria, the prebiotic No. 1 – lactulose was studied. The main content of the study is the analysis of the effect of increasing the amount of SOM concentrate on the chemical composition of the compositions of experimental products. The bacterial concentrates Bifilact-B and Bifilact-u were selected as the source of probiotic cultures. In fermented products, microbiological indicators were determined: the total number of lactic acid cultures and bifidobacteria. The article analyzes the dynamics of acidity of experimental products fermented with bifilact-B bacterial concentrate and bifilact-u bacterial concentrate. It was found that in experimental products with a high level of acid formation, the growth of bifidobacteria decreases, this is due to the fact that at low pH values, the growth of bifidobacteria slows down, and at a pH below 4.5 – stops. There was a significant increase in the number of bifidobacteria in the presence of a prebiotic – lactulose concentrate. The authors proved that the fermentation process with the formation of a clot in experimental products with bifilact-B bacterial concentrate is completed within 9-10 hours, taking into account the time of compaction of the consistency. In experimental products fermented with bifilact-U bacterial concentrate, the fermentation process ends within 7-8 hours, that is, by (2.0±0.5) hours faster.

Main problem: Presence of acidic chemicals such as carbon dioxide and hydrogen sulphide, composition of production fluids triggers corrosion. Corrosion in oil and gas industry leads to deterioration of equipment since most of equipment is made of metal alloys. Application of inhibitors is one of the corrosion mitigation methods that needs to be controlled because it is important to identify optimal concentration of the chemicals in production fluids.Residual chemical analysis plays an important rolein identifying the appropriate dosage of corrosion inhibitors and its correction. It is imperative to find the most optimal concentration of amines due to the fact that both overdose and underdose could lead to equipment deterioration. The chemical analysis is hindered by complexity of mixtures that are applied in petroleum industry. Purpose: The main purpose of this article is to find out the most effective method of residual chemical analysis for inhibitors used against sweet and sour corrosion by studying and analyzing corresponding literature review. The analysis should be carried out with robust, sensitive, and accurate instrumentation. Methods :Theoretical study of composition and mechanism of amines used in oil and gas industry as corrosion inhibitors and selection of appropriate instrumental analytical techniques for the residual analysis. Results and their importance: After careful studying and consideration of modern instrumental analytical techniques the most optimal and efficient method in terms of robustness, time saving and cost was selected. Ion chromatography is an adequate method to carry out residual chemical analysis for amines that are used as inhibitors in oil and gas industry to prevent sweet and sour corrosion.

In the last decades of the twentieth century, in the national economy of many countries, organochlorine pesticides were most widely used, characterized by stability in the external environment, the ability to cumulate in various tissues of organisms. Lindane (the gamma isomer of hexachlorocyclohexane) is listed as a restricted persistent organic pollutant and is an ecotoxic substance with severe and chronic effects on the human body. The study of the effect of lindane on carbohydrate metabolism at the present stage is still insufficient. This fact led to the study of the effect of γ-HCH on the insulinogenic function of the pancreas in in vivo and in vitro experiments. In experiments in vivo, the animals of the experimental groups were once orally administered γ-HCH at a dose equal to 1/5 DL50. Isolated pancreatic islets, precipitated in vitro and fixed on mica plates, were exposed to γ-HCH in amounts equivalent to 1/5 to 1/4 DL50. Paraffin sections of pancreatic tissue from experimental and control animals were stained with aldehyde fuchsin according to Gomori, and tissue preparations were also examined by a highly specific method for detecting insulin in β-cells using diethylpseudoisocyanin staining, followed by examination of the preparations in the ultraviolet light of a luminescent microscope.The same methods were used to study preparations of isolated pancreatic islet tissue on the 4th day of cultivation. The influence of orally administered γ-HCH on the level of immunoreactive insulin in the blood of experimental animals was also studied. The insulin level was determined by the enzymatic-immunological method. The concentration of IRI was established before the start of the experiment and 4-4.5 hours after acute inoculation. Results and their significance. In the study of stained preparations of the pancreas of experimental animals, numerous islets of ordinary sizes were revealed, the cytoplasm of which was filled with aldehyde-fuccin granularity in quantities indistinguishable from those observed by microscopy of preparations of control animals. The value of the fluorescence coefficient in the histofluorimetric study of the control and experimental preparations did not differ significantly. However, the content of IRI in the blood serum showed a distinct decrease in the first hours after priming. In experiments in vitro, when studying the effect of γ-HCH on cultured tissue, introduced into the nutrient medium on the second day, in the field of view of the microscope, single, small pancreatic islets were revealed. Their number on a constant area of the plates was significantly lower than the value of the same indicator in the study of control preparations. Thus it has been shown that γ-HCH does not affect the histostructure of the endocrine pancreas, but causes a significant decrease in IRI in the blood serum, as well as a change in the histochemical characteristics of cultured β-cells.

The COVID-19 coronavirus pandemic has brought about a new economic reality, to which every economic entity must adapt, regardless of the scale: within a region, a country, or the whole world. The article examines the regional economic mechanism in the context of the pandemic in the context of the interaction of the market mechanism of self-development and the control influence of the regional authorities. The destabilization of the economic situation in the regions as a result of the pandemic and related restrictions poses the problem of revising the main directions of regional policy To achieve the set goals and objectives, the general methods of empirical and theoretical research were used: analysis, synthesis, induction, deduction, generalization, description. Three spheres play a key role in the economy of Pavlodar region: industry, trade and transport. Just how to remain positive dynamics in terms of industrial production and maintained the services will depend on the development of the region, the main indicators which are discussed in this article through the prism of the events in the context of the pandemic. The necessary health measures taken in response to the pandemic have led to a severe reduction in mobility and are accompanied by high economic costs. The quarantine measures have had a direct impact on businesses, especially microbusinesses. To support this sector, tax incentives were provided, lending was expanded, and measures were taken to further facilitate the business environment. The article reflects only a small list of issues that required changes in the economic mechanism in the context of the pandemic and the introduction of restrictive measures, as well as the strengthening of the influence of external control on the economy. At the same time, the state as whole and individual regions, taking into account their potential and the actual situation in the economy, need to find an optimal balance between the prohibitions and restrictions imposed to ensure the safety of human health and the preservation of the economy in a functional mode, work and income of employees. This problem of finding a balance between prohibitive and permissive measures requires further analysis. At the same time, the state needs to develop and apply tools of a systematic nature, focused on the long term.

The progress of work on the creation of an "intelligent transport system" in Kazakhstan, the development and modernization of the road industry will be reported. The economic and social effectiveness of several transport corridors and new projects were analyzed. Transport corridors of foreign countries, methods of providing logistics services were presented. In his address, the head of state paid special attention to the issues of digitalization of all spheres of life of the population, including the transport sector of Kazakhstan. Currently, the Ministry of investment and development of the Republic of Kazakhstan is working on the creation of an "intelligent transport system" within the framework of the state program «Digital Kazakhstan» (ITS). ITS goal is to systematically integrate transport infrastructure, transport devices and users with modern information and communication technologies aimed at improving the safety and efficiency of the transport process. The concept will include 11 components in ITS. One of them is a special automated measuring instruments (UAVs), which are installed in the main automobile corridors. This device is designed to measure moving vehicles without contact and eliminate unjustified stops. This year, it is planned to put into operation 10 units of RSPP, and by 2020 it is planned to increase their number to 46 units. It is also planned to introduce a traffic management system that will inform drivers about the situation on the roads, a system for forecasting and analyzing climatic conditions, which is carried out through a network of weather stations along the roads, a network of video monitoring and special video cameras for detecting traffic violations, toll road systems that cover the cost of maintenance of the national road network, etc. They will be introduced in stages until 2021. The implementation of this project will reduce road deaths, increase the volume of transit traffic and the speed of logistics services, fully cover the main highways with measuring instruments and create favorable conditions for drivers on the roads. Such systems are already operating in South Korea, Japan, Australia, Europe and the United States.

Main problem: Technogenic "metamorphosis" of vegetation near such large industrial facilities as Pavlodar is considered to be the result of various active chemical and mechanical factors provoked by economic activities associated with the influence of emissions from industrial companies. The effect of anthropogenic impacts on vegetation in all regions of Kazakhstan varies and is largely dependent on the economic development of the territory, but in any case, the end result of this impact is the change in the vegetation, causing violations of with structure, reduced vodorazdelnaya flora and productivity of communities. This, in turn, can cause infection of herbaceous plants with pathogenic fungi, which then carry with them: a decrease in the intensity of plant growth, a deterioration in their decorative qualities, a decrease in the survival of the biological species. Purpose: to study the types of fungi-pathogens of phytopathogenic diseases and to determine the degree of modification of the plant component, which is under intense negative technogenic influence from the Aksu Ferroalloy Plant (AFР). Мethods: For the experimental study, species of plants such as: Artemisia dracunculus L; Artemesia vulgaris L; Atriplex fera L; Atriplex patula L; Artemisia annua L were selected for the content of fungipathogens of phytopathogenic diseases. Results and their significance: This experimental study was aimed at the presence of fungi-pathogens of herbaceous plants as a result of human impact, occurring near the industrial zone "AFР". The composition of fungi-pathogens of herbaceous plants collected in this industrial zone was considered and studied. According to the results of an experimental laboratory study, phytopathogenic fungi of herbaceous plants belonging to 1 ordo, 1 familia, and 4 species were found.

The main task of microbiological study of pulmonary patients is to identify the etiology of acute and exacerbation of chronic disease in order to determine therapy and control its effectiveness. Classical methods of microbiological research consist in isolating a pure culture of the causative agent of the disease with its identification by biochemical, antigenic and other characteristics. Such studies are multistage; they impose rather strict requirements on the quality of the source material, the timing and conditions of its transportation, laboratory equipment and the precise execution of the research methodology for at least 3-5 days. Isolation of the culture of a number of pathogens (atypical intracellular microflora, anaerobic bacteria, mycobacterium tuberculosis) requires even more lengthy studies using special media and equipment. This article presents the results of a bacteriological study of pathogenic microflora in diseases of the respiratory system of the population of the Shcherbakty district of Pavlodar region for 2017-2019, including the following sequence: microscopy of native and Gram stained smears; inoculation of biological material on nutrient media for isolation and identification of the pathogen; determination of the sensitivity of the isolated microorganism to antibiotics; immunological (serological) research methods aimed at determining antigens of microbiological origin, as well as antibodies to them in the patient's body. It has been shown that conducting bacteriological studies in accordance with the requirements of regulatory documents allows obtaining reliable and comparable results necessary both for the optimal treatment of patients and for collecting and analyzing data on monitoring the emergence and spread of diseases of the respiratory system caused by pathogenic microflora.

Today, there is a full development of the food industry. It is characterized by the widest mechanization and automation of production and transport processes, the use of artificial cold and vacuum technology, the latest physical methods, chemical and biological preparations to accelerate technological processes. There are a huge variety of new products. New ways of long-term preservation of products in hermetic airtight packaging are promising. Now it is possible to deliver products from almost any industry to anywhere in the world. But the main problem for the modern consumer is that today's food industry is moving by leaps and bounds in the application and addition of chemical food additives: preservatives, flavors, dyes, stabilizers, antioxidants and substitutes for raw materials. To correctly answer the question of how to treat the use of food with food additives, it is necessary to understand and weigh the main disadvantages and advantages of using them. Advantages are that the product is better preserved, has an attractive appearance. Disadvantages are that the human body wears out, processing various chemicals, it is harmful to health. And with certain doses of use it becomes dangerous. Everyone has their own attitude to their health and their own priorities in life. Many people have come to terms with the daily use of products with additives, but others consciously refuse almost everything in the store. But the fact that no one wants to be poisoned from an overdose of various chemicals or starve to death. Therefore, the main advice is to carefully study the composition indicated on the label of food products and know the measure of their consumption. It is also impossible to believe blindly that the label was written with the truth. Manufacturers often use additives literally visually, which can lead to the production of a product with a dangerously higher concentration. It also happens that the manufacturer intentionally exceeds the norm in order to hide the shortcomings of the product (stale, poor quality of raw materials) and increase the yield of the finished product. The food additives added to many foods (usually designated by the code E) are predominantly harmful to the body. With moderate consumption, the use of products with E-supplements is not too harmful to the body (for example, several times a month). The situation is dangerous when a person consumes products with a large number of food additives daily or even several times a day when using various products. Nowadays, there are several hundred food additives with the code E (from E100 to E1521).

The sharp deterioration of the environmental situation in the Republic of Kazakhstan, associated with human activity and the impact of harmful factors on the environment, affected the quality of food consumed by insufficient consumption of domestic fruit and vegetable products containing vitamins, minerals of an alkaline nature, carbohydrates, vegetable proteins, pectin substances and active fiber. The problem of improving the quality of growing and processing fruits and vegetables is one of the main tasks of the food independence of the Republic of Kazakhstan. Currently, the share of large vegetable farms in the Republic of Kazakhstan is only 10%. The volume of industrial processing of fruit and vegetable crops in Kazakhstan is insignificant. The demand for domestic fruit and vegetable products in the country is met only by 35-40%, most of it is imported from countries such as Russia, Kyrgyzstan, Uzbekistan and China. There is a need for the development of organic vegetable growing in Kazakhstan and the creation of new types of domestic fruit and vegetable products containing a sufficient amount of useful and active substances that can bind and remove toxic substances and radioactive elements from the human body. The purpose of the work is to improve the technology of fruit and vegetable semi-finished products with natural spicy and aromatic additives, to develop a multi-component recipe for vegetable mixtures and a method for producing quick-frozen vegetable mixtures with high quality indicators. These studies were aimed at studying the chemical composition and functional and technological properties of vegetables and spicy - aromatic plants for the content of biogenic compounds: carbohydrates, proteins, vitamins, essential oils, minerals and other substances. The structure of plant tissues was studied and the mass fraction of moisture, dry matter, fiber, mono - and disaccharides, pectin substances, vitamin C was determined, the formulation and production technology of Assorted vegetable mixtures were developed, and quality indicators were determined.

Fruits and vegetables are most often consumed without being thoroughly processed before consumption. Some plant foods are vacuum-packed to ensure long shelf life as well as preserving the quality and safety of the product. Fruits and vegetables carry naturally occurring non-pathogenic epiphytic microflora on their surfaces. During growth, harvesting, transport and further handling they can be repeatedly contaminated by pathogens from human or animal sources. Fresh fruit crops have been implicated in a number of documented foodborne disease outbreaks. Outbreaks of diseases caused by bacteria, viruses and parasites have been epidemiologically linked to the consumption of a wide range of fruits and vegetables. The aim of our study is to assess the risk of contamination in fruit and berry crops and how to address this long-standing problem, namely, contamination of fruit and vegetables with unnatural pathogenic microflora. The following fruit and berry crops common in Turkestan region were chosen for the experiment: Apple variety Suislepskoe (stolovka) , peach variety Nectarine and grape variety Kishmish. Bacteriological inoculation was carried out by membrane filtration of used sterile water to obtain flushes from the surface of fruit crops. All work was carried out under full aseptic conditions. The utensils, water and other equipment used in the work were sterilised in advance. The data obtained during the experiment shows that there is a potential for widespread contamination of uncharacteristic microflora of plant products. Based on the results of the study it can be concluded that there are yeasts and acetic acid bacteria on the surface of all three samples of fruit and berry crops, which can be universally contaminated food and are not the natural microflora for the above mentioned crops. Specifically, fruits and vegetables can be contaminated with various bacterial pathogens, including Salmonella, Shigella, E. Coli O157:H7, Listeria monocytogenes and Campylobacter.

Currently, close attention is paid to industrial safety at hazardous production facilities. Compliance with industrial safety requirements is directly related to the risks of accidents that can lead to man-made disasters, negatively affect the health and life of the population. As in any other industry, there are problems in ensuring industrial safety. There are several reasons for this: the backlog of standards from scientific and technological progress, the exclusive competence of state authorized bodies, and the lack of a risk-based approach. After the collapse of the USSR, the requirements of industrial safety in the Republic of Kazakhstan have practically not changed: laws and statutory instruments (hereinafter-the LSI) are approved and put into effect, after which they are constantly changed and supplemented; the presence of national and international standards, which, in fact, are revised on the basis of the USSR standards, taking into account the influence of the realities of the time. It can be concluded that the current standards are not focused on the future, scientific and technological progress, innovation, so they are constantly undergoing changes, thereby adapting to the necessary requirements that dictate modernity. State regulation does not contribute to the effective development of industrial safety. This is due to the fact that the state performs exclusively supervisory functions (thus it is exclusively educational in nature), and there is no dialogue between authorized state bodies, expert organizations, scientific organizations, and testing laboratories. If we consider the experience of the Russian Federation in the field of industrial safety, then it makes no sense to accept even some experience, since: similar to the Kazakhstan’ LSI and regulatory and technical documentation (and their constant dynamics), the development of cooperation with the Russian Federation within the framework of the Eurasian Economic Union. Accordingly, it is advisable to consider the experience in the field of industrial safety in Europe and the United States of America because of the effectiveness of regulation and supervision than in the Republic of Kazakhstan and the Russian Federation. This article provides information about international experience in the field of industrial safety in the United States and the European Union. The tasks of state regulation in the field of industrial safety in the Republic of Kazakhstan, the Russian Federation, the United States, and the European Union are described in detail. The analysis of normative-legal acts and normative-technical documentation is carried out. Based on the analysis of international experience, solutions to problems in the field of industrial safety for the Republic of Kazakhstan are essentially presented. The purpose of this article is to reveal the problem in the field of industrial safety in the Republic of Kazakhstan and international experience that the Republic of Kazakhstan can borrow in order to effectively ensure industrial safety. Study of international experience (USA, EU countries, Russia) in the field of industrial safety in terms of: analysis of standards; regulation (control and supervisory functions) to ensure safety. The results of this article will reflect the problems that hinder the effective provision of industrial safety in the Republic of Kazakhstan and essentially suggest ways to solve them.

The main problem: The rheological properties of calcium salts are of theoretical and practical interest for a modern researcher. The theoretical interest is primarily related to the search for general patterns and manifestations of the rheological properties of solutions of calcium salts. The practical component is based on the search for patterns and dependencies of the properties of solutions on the structure and composition of the object of study. Such chemicals as calcium salts are of particular practical interest, they are widely used in various fields, such as the food, chemical and pharmacological industries. Hydrophilic high-molecular solutions of alginates, namely calcium alginate, are actively used in the preparation of soft dosage forms, the manufacture of jelly masses in confectionery, act as thickeners in the food industry. They are characterized by a fairly high percentage of viscosity at low concentrations, bioavailability, prolonging effect, absence of irritating properties, biocompatibility with many polymers, which is especially important in the pharmaceutical industry and medicine. The use of calcium salts for these purposes is currently very promising, since these organic salts have a number of unique properties associated with gelation. Purpose: This paper contains the results of studying the features of the rheology of calcium alginate solutions. A concentration range of 0.1-0.7 % was chosen for the studies, which is sufficient to avoid gelation at room temperature. The dependence of viscosity on concentration, temperature (in the range of 25-45 °C) and shear rate were studied. Methods: Analysis of theoretical sources, observation, comparison of results. The rheological characteristics of the obtained substances were studied using a capillary viscometer. The measurements were carried out in the temperature range of 25-45°C. Results and their significance: it was found that there is a significant dependence of viscosity on concentration and temperature. For concentrations of 0.3 – 0.7 %, a similar type of dependence is observed, in contrast to solutions with a concentration of 0.1 % . Explanations of these dependencies were proposed.

This article discusses the current data on the biochemical properties of bacteria of the genus Lactobacillus and their use in industry, particularly in dairy production and biotechnology. Microorganisms of the genus Lactobacillus have antagonistic activity against pathogenic microorganisms and perform an immunomodulatory function. The positive effect of lactobacilli on human health explains their active use in probiotics. The positive effects of normal intestinal microflora and probiotics are mainly due to bifidobacteria and lactobacilli. In probiotic therapy, various types of bacteria of the genus Lactobacillus are used, such as: L. acidophilus, L. rhamnosus, L. plantarum, L. fermentum, L. delbrueckii subsp. bulgaricus, L. casei, L. paracasei. In recent years, the biotechnology of probiotics has been intensively developing - drugs used for the correction and prevention of microecological disorders in the gastrointestinal tract of humans and animals. An urgent issue is obtaining new data on the biological properties of lactobacilli, creating new probiotic preparations based on them using modified approaches to cultivation. The results of determining the species L. acidophilus L. casei, L. rhamnosus, L. paracasei, obtained by the classical biochemical identification method based on saccharolytic activity, complicating species identification, are comparable to the molecular genetic method. In the case of L. casei, L. rhamnosus, L. paracasei, it is necessary to carry out modern identification methods based on the polymerase chain reaction, since their biochemical properties are similar, which makes it difficult to carry out species identification. The molecular genetic method is a valuable addition to the intergeneric and species identification of lactobacilli, given the variability of the classical biochemical method.

Currently, the problems of environmental safety are facing society. The industry develops every year. In this critical economic situation, the oil industry is a stimulant for the economic sector in Azerbaijan. The level of development of this industry is also relevant due to other reasons: sociological, technological and features of the economy of Azerbaijan. The production activity of oil processing, concentrating harmful substances and energy, is a source of man-made danger and pollution of the natural environment. The risk management process mainly consists of three stages - risk safety analysis, risk assessment, which is carried out in comparison of calculated and actual risk levels, the so-called acceptable risk levels and the adoption of appropriate regulations and management decisions. One of the factors that should be taken into account when assessing risk and safety is to determine the necessary costs. Since these costs are paid directly to the company, they try to minimize them as much as possible, which reduce the accuracy of risk assessment. One of the objectives of the study is to determine the optimal value of the necessary costs. It is established that the less reliable the method, the lower is the cost of its implementation. The methodological basis of the work was scientific works on these problems of scientists-economists, mathematicians on safety and risk assessment at industrial enterprises. When developing the presented methodology, computational algorithms developed by Dow Chemical were used. This company has collected a large volume of material on accident statistics, taking into account damages. Based on the obtained and experimentally verified data, a system of indices has been developed, an assessment of various indicators for qualitative and quantitative risk assessment of oil refineries. The analysis of the technogenic danger of oil refineries makes it possible to determine ecological and economic losses and choose rational possibilities of acceptable risk. The required costs, depending on the level of risk, are determined based on an increase in the accuracy of calculating the probability of occurrence of the cause of risks. The article examines the relationship between the expected level of risk and economic losses during oil refining in separate technological units, which allow determining the required level of risk and the expected economic damage.

Singularly perturbed partial differential equations with small parameters with higher derivatives deserve special attention, which often arise in a variety of applied problems and are used in describing mathematical models of diffusion processes, absorption taking into account small diffusion, filtration of liquids in porous media, chemical kinetics, chromatography, heat and mass transfer, hydrodynamics and many other fields. It is necessary to consider the creation of an asymptotic classification of solutions of singularly perturbed equations using a well-known approach to solving the boundary value problem. In this case, the singular problem is understood as the problem of constructing the asymptotics of the solution of the Cauchy problem for a system of ordinary differential equations with a small parameter with a large derivative. The asymptotics of the solution in all cases is based on the last time interval or the construction of a boundary value problem for a system with a weak clot in an asymptotically large time interval. Purpose - to construct and substantiate the asymptotics of solving a singular initial problem for a system of two nonlinear ordinary differential equations with a small parameter; To date, a number of methods have been developed for constructing asymptotic expansions of solutions to various problems. This is the method of boundary functions developed in the works of A.B. Vasilyeva, M.I. Vishik, L.A. Lusternik, V.F. Butuzov; the regularization method of S. A. Lomov, methods of averaging, VKB, splicing of asymptotic decompositions of A.M. Ilyin and others. All the above methods allow us to obtain asymptotic expansions of solutions for wide classes of equations. At the same time, such singularly perturbed problems often arise, to which ready-made methods are not applicable or do not allow to obtain an effective result. Therefore, the development of methods for solving equations remains a very urgent problem. As a result of the study, an algorithm for constructing an asymptotic classification of the initial solution of the problem with a singular perturbation is given, and approaches to estimating the residual term are also shown.

Main problem: The article analyzes water quality assurance as the main goal of preserving human health. The study of chemical and microbiological parameters of wastewater and drinking water was carried out using generally accepted standards. The number of deaths associated with the use of contaminated drinking water, according to WHO, tripled in 2021 and reached almost 19 thousand against 6 thousand in 2020. In addition, the number of neoplasms, diseases of the genitourinary system, digestive organs and skin increased by 2 %, to 1.486 million. The reasons for the increase in the level of harmful chemicals and microbiological pollutants in the water are outdated sewage treatment plants, old pipes and disinfection with chlorine. Purpose: Study of the quality of wastewater and drinking water in Pavlodar, study of the quality of wastewater and drinking water in Pavlodar. Methods: Sampling of wastewater, chemical and bacteriological analysis of wastewater and drinking water, statistical method, correlation analysis of experimentally obtained results and calculated characteristics, etc. Results and their significance: In the field of public health risk, pollution of reservoirs that are sources of household drinking water supply and recreational water use, the continuing necessary high deterioration of water supply networks, their accident rate, as a result of low level of operation, failures in the operation of treatment facilities. Hygienic assessment of reservoirs according to complex indicators indicates the continuing high degree of water pollution in places of water use. The water quality indicators of the surface reservoirs of the region remain low in terms of sanitary and chemical (primarily organoleptic and general sanitary), as well as microbiological indicators. According to toxicological indicators, the level of water pollution in places of water use is estimated as moderate. The main pollutants of the Irtysh River in Pavlodar are industrial enterprises and housing and communal facilities that discharge untreated or insufficiently treated wastewater into reservoirs. A complex of causes of drinking water pollution has been identified: high deterioration of water supply networks, their accident rate, because of a low level of operation, failures in the operation of treatment facilities, unfair treatment of industrial wastewater by industrial enterprises of Pavlodar, etc. Priority preventive directions for improving the quality of water as a source of life are the implementation of long-term targeted planning of measures for the modernization of water supply and sewerage networks and facilities in Pavlodar. The state of water supply necessary and measures to improve it should be constantly monitored and considered at meetings of sanitary and anti-epidemic commissions.

Main problem: The unfavorable conditions in which a significant part of the population of our country lives (living in conditions of harmful, stressful, physical, chemical and radiation effects), an imbalance in nutrition dictate the need to create a variety of functional products enriched with pro– and prebiotic factors. In the science of nutrition, a functional direction has been developed - this is nutrition, which provides for the consumption of such products of natural origin, which, when used daily, have a regulating effect on the body as a whole, its certain systems, organs, providing a drug-free positive correction of their function. Compared with traditional types of dairy products with high organoleptic and commodity characteristics, produced on the basis of classical technological techniques, dairy products of the new generation should have increased nutritional and biological value. The article is devoted to the research and development of the technology of a new cottage cheese product - cottage cheese paste produced with the addition of lactulose concentrate and fruit and berry fillers. This article discusses the steady trend towards the use of fermented milk products with functional properties in the diet of modern humans. Purpose: Study and development of technology of thermized cottage cheese paste enriched with prebiotic lactulose and fruit and berry fillers. Methods: Analysis and generalization of theoretical information, organoleptic evaluation, physicochemical methods of analysis, microbiological methods of evaluation of cottage cheese paste, quality control of the finished product. Results and their significance: The positive role of prebiotic substances in the vital activity of the macroorganism was studied. It is not for nothing that academician Andrei Georgievich Khramtsov once called lactulose "a miracle made of milk." Lactulose, being a strong bifidogenic factor, allows stabilizing the microflora of the stomach. Lactulose activates the growth of bifidobacteria, which take root well in the intestine and ferment lactulose to form lactic acid. Lactic acid suppresses the development of pathogenic and putrefactive bacteria. As a result of the conducted studies, it was determined that the cottage cheese paste enriched with lactulose had high quality indicators and retained its consumer properties during the entire storage period. The introduction of lactulose into the recipe of cottage cheese paste does not reduce the nutritional advantages of the finished product.

The variety of species and forms of parasites of agricultural animals and the features of their life cycles are the basic foundation for the production of different types and medical forms of antiparasite medicine. In the treatment of the parasitic diseases of agricultural animals, one of the main factors is that the veterinary doctors have the knowledge on the mechanics, efficiency and the safety for humans and environment of the medicine being used. Taking into account high pathogenicity and resistance of parasitic organisms and their ability to adapt to effect of medicine, it is crucial to permanently monitor the efficiency of the applied anthelmintic drugs, including the new drugs offered by veterinary services. This article will describe the results of the research on pharmacodynamic and pharmacokinetic parameters of «Ivermectinum», «Ivermec», «Aversect-1», «Аvrsect-2», «Аivin» drugs and their methods of application with the consideration of terms of maintenance and immune status of cattle herds in Mayconyr village (Irtysh district, Pavlodar region). A comparative analysis of efficiency of the above mentioned drugs in dehelmintization and treatment of cattle was conducted with the results provided. The recommendations and the restrictions on use of the drugs were determined considering the farm condition. The experimental research of the aforementioned broad-spectrum drugs was conducted strictly following the rules of asepsis and instructions on application. The total number of replacement heifers subjected to the dehelmintization under the method of analogues is 150 units. Anthelmintic treatment was conducted two times a year - in springtime (March-April) before pasturage, and fall time (September-October) before confining the cattle in the stable. Coprological study on intestinal helminthes of the examined cattle was conducted in Irtysh RVL of the Pavlodar regional branch of RVE RVL VCaSC MA RK by ovoscopical, flotation and larvoscopical methods. There is a comparative analysis on the efficiency of avermectin group antiparasitic drugs applied twice a year for cattle dehelmintization. The recommendations on the use of the aforementioned drugs for dehelmentization and prevention of parasitic diseases are provided and the requirements for the use were determined.

An analysis of the mechanical, chemical and pyrogenic impact of the Baikonur Cosmodrome on the environment showed the presence of man-made impacts of the first stages (FS) used on the ecosystems of the impact zones (IZ). This article presents the concept of a controlled landing of spent launch vehicles with liquid rocket engines (LRE) in the expected zones of damage to the ecosystems of the area while maintaining the energy-optimal launch scenario of the launch vehicle. Purpose of the article - development of effective technologies for reducing the anthropogenic impact during launches of promising rockets from the Baikonur Cosmodrome based on theoretical and experimental studies of innovative technologies: reducing the area of impact of parts from launch vehicles; fire and explosion safety, no danger of rocket launchers; controlled descent of used first stages; To solve the problem, it is proposed to create an additional IASM, which will be included in the environmental management system of the Baikonur Cosmodrome. Possible design solutions are proposed based on the evaporation of untreated liquid waste from the tanks of separated parts, their fire and explosion safety, and the use of the obtained vapor-gas mixtures for controlled unloading of separated parts while moving along the landing trajectory to the optimal area. The authors of the article have developed evaluation criteria that characterize the main environmental indicators of the studied areas: fire hazard, soil cover and impact on vegetation are studied for inclusion in the IASM. There are objective requirements and basic rules for the creation of HIASM, which is an integral part of the environmental management system of the cosmodrome.

Main problem: It is very important for each company to obtain an industrial certificate, which makes it possible to get into the Register of Domestic Manufacturers, as they expect to receive large orders. With the receipt of an industrial certificate, their prospects for participation in various tenders and purchases will significantly increase, where they can show their abilities, compete with domestic producers, and also have an advantage over importers. Since July 1, 2019, the industrial certificate has become mandatory for participation in public procurement. Corresponding changes to the rules for public procurement were made by the Ministry of Finance of the Republic of Kazakhstan. Taking into account the experience of the «Rules for determining the country of origin of goods, issuing a certificate of origin of goods and canceling its validity», approved by Order of the Acting Minister for Investment and Development of the Republic of Kazakhstan dated February 24, 2015. No. 155», it becomes clear that the document does not take into account a number of «narrow» specifics of individual industries. Purpose: development of amendments and additions to the «Rules for the formation and maintenance of the register of domestic producers of goods, works and services, as well as the issuance of an Industrial Certificate» for the subsequent possibility of obtaining an Industrial Certificate by a chemical industry enterprise for the production of mineral fertilizers. Methods: study and analysis of literary sources, statistics and modeling of the procedure for issuing an Industrial Certificate. Results and their significance: the problems of application were studied, ways to solve these problems were found, and amendments and additions to the “Rules for the formation and maintenance of the register of domestic producers of goods, works and services, as well as the issuance of an industrial certificate” were developed. At the moment, the Rules need to be carefully finalized. It is necessary to consider this issue together with authorized state bodies, associations and business representatives, since obtaining an Industrial Certificate will directly affect participation in public procurement, and, accordingly, the economy of the Republic of Kazakhstan.

As part of solving the priority tasks set in the Address of the President of the Republic of Kazakhstan Kassym-Jomart Tokayev, a significant role is given to the development of the food industry, including dairy products. Big tasks are to be solved by branch science in the field of processing raw materials of plant and animal origin using the achievements of bio- and nanotechnologies to improve the quality, biological, nutritional value and food safety. New approaches are needed to organize the complex processing of plant and animal raw materials in order to improve the economic, social and environmental aspects of the production itself, as well as the life of the population of the Republic of Kazakhstan. Despite the extensive range of processed cheeses, it is constantly updated. This is due to the need to meet the requirements of nutritional science, changing consumer demand, as well as the availability of raw materials and considerations of the profitability of a particular type of cheese. The working hypothesis of the research was the assumption that for the melting of raw materials it is possible to use reagents that affect the active acidity of the medium, stabilize the structure, bind moisture and improve the consistency and organoleptic characteristics of the finished product. The article is devoted to the issue of the process of melting rennet cheeses. The purpose of the article is to show that the melting process is closely related to different forms of raw material protein micelles. In this article, the influence of the type and amount of melting salt on the formation of the structure of processed cheese is considered, the rheological indicators of experimental products are determined in accordance with the scoring of processed cheeses. The indicator of water activity (аw) was established, the microbiological parameters of the experimental products were determined.

The production of vaccine preparations before release requires standardization of their immunobiological parameters, especially safety and immunogenic efficacy. An indicator of the immunogenic effectiveness of the lumpy skin disease vaccine is the resistance of vaccinated cattle against the virulent virus. However, according to preliminary studies, the virulent control virus did not always cause clinical disease with characteristic symptoms when infected subcutaneously. The purpose is to develop a biological model in the form of a complex consisting of a pathogenic virus, a method of infection and a susceptible animal to assess the immunogenicity of a lumpy skin disease vaccine. Local cattle, intact from lumpy dermatitis, were used to reproduce lumpy dermatitis and develop the causative agent of the disease. As the initial infectious virus, we used a 20 % tissue suspension of nodules (skin nodules) obtained from cattle that fell ill with lumpy dermatitis in the field in the Atyrau region in 2016. As a viral mass to control immunogenicity, a 20 % suspension of skin nodules and edematous skin tissue at the site of the pathogen injection, obtained after the “refreshment” of the virus in animals, were used. The disease was reproduced by infection with the test suspension of the virus intradermally, subcutaneously, intravenously at a dose of 0.5 cm3 and titration on the skin of the animal. The effectiveness of the biological model was assessed by morbidity, severity of the course and severity of the manifestation of the disease. During primary intradermal infection with a field isolate of the virus, the disease manifested itself in one of three animals in the form of hyperthermia, depression, lacrimation, and the appearance of several nodular nodules in the skin of animals. The refreshed tissue virus caused clinical disease both in subcutaneous, intradermal and intravenous infection. But the clinical signs of the disease were more pronounced with intradermal inoculation of the virus, and with intravenous inoculation, it manifested itself in a more severe form with a fatal outcome. Inoculation of the virus intradermally into different areas of the skin led to the development of an independent skin lesion in each infected point in the form of painful edema, followed by necrosis, the size and intensity of which depended on the dose of the injected virus. This development of skin pathology made it possible to work out a method for determining the virus titer in vivo. The tissue virus obtained from the edematous tissue at the site of the pathogen injection was guaranteed to cause clinical disease in cattle during intradermal inoculation and made it possible to evaluate the immunogenic efficacy of the produced batches of vaccine against lumpy dermatitis.

In order to successfully conduct agricultural work and obtain a competitive harvest, it is mandatory to carry out spraying operations of crops that require highly qualified personnel, expensive equipment and suitable weather conditions. The use of tractors for spraying fields is the most common solution available at the moment, has disadvantages: high cost, risk of damage to the crop by "hitting", "hooking" or otherwise; environmental damage; due to exhaust gases, the demolition of the solution increases with increasing speed. Using a device designed specifically for spraying equipment is an ideal solution. The purpose of the article is to develop a working model of an automated sprayer for processing agricultural crops. The methods used are: technical justification of a controlled device for processing agricultural crops. Calculation of functional capabilities, algorithms of operation of the proposed automated device: selection of the type of sprayer, engine, chassis, controller, battery, as well as justification of the possibilities of using alternative energy sources (wind energy, solar energy); development of a 3D model of an automation device for anti-weed processing of agricultural crops, printing of parts, assembly of mechanical and electronic parts. Making a prototype using 3D printing; development of the wiring diagram of electronics, software (firmware of the microcontroller; application that controls the settings), testing of the prototype, assembly of the current model; rationale for the optimal use of Arduino and Raspberry Pi boards in this device in a pair: Raspberry Pi will allow you to control processes on the Arduino and easily interact with the Internet when the Arduino itself will perform simple operations such as interacting with electronics and reading sensor readings. The manufactured operating model showed compliance with the goals, a high degree of controllability, environmental friendliness, reduction of energy consumed, labor resources and can be used to scale this device. The developed model of the automation device for anti-weed treatment of agricultural crops can be used not only in agricultural pollination, but also as a mechanism for studying soil parameters: humidity, mineralogical composition and chemical content in the ground, using electronic sensors, as well as an automated mobile platform for any purpose requiring accurate navigation through the territory.

The process of creating new forms is the key to choosing the combination of different textures for a unique aesthetic effect. Currently, various elements of the interior, including furniture and other decorative additions, are the basis for obtaining emotional balance, which is achieved between the functional purpose of the interior and its artistic and figurative concept. The main task in creating such objects is to create the most comfortable and harmonious atmosphere in the interior, regulating the mental processes of a person, which would cause exceptionally positive emotions and stimulate the creative development of users. The purpose is to consider the features of the use of epoxy resin in the design of interior objects and to study the importance of synthetic resins as a modern material for new ways of shaping in interior design and decoration. The methods used are: the use of formaldehyde resins as a modern, affordable, multifunctional material, the combination of resin with coloring and the use of various textures. Expansion of the range of interior elements in the manufacture of which epoxy resin is used. In this regard, it should be noted that the use of various resin compositions when creating design objects meets consumer requirements and complies with modern and latest trends. In this article, a brief study of such a polymeric material as epoxy resin was carried out. The properties of epoxy resin and how they affect the compositional solution, methods of its modification, and functional aspects of design from the point of view of manufacturing interior elements are described. The technologies for manufacturing modern products for decorative and applied purposes coated with epoxy resin are considered. In the process of researching technologies, a series of experiments are carried out to determine the structure of possible sequential actions, within which a technology will be studied and designed to ensure the safety of a new design product made of synthetic materials, then a constructive logic will be provided in which not only the functional properties of the object will not suffer, but also acquire valuable innovative value

On the territory of the Northern industrial zone of Pavlodar in the area of the industrial wastewater reservoir «Bylkyldak» in some areas of the earth there is soil contamination with mercury, exceeding the MPC for mercury (2.1 mg/kg) by 500 times. The total mass of mercury dispersed in the surface layer of soils is 2.8 tons. The mass of contaminated soil is approximately 208,000 tons. Pollution of the territory is historical. The purpose of the article is to determine the efficiency of chemical binding (immobilization) of mercury in the soil with the Japanese drug Denite® in real field conditions of the territory of mercury contamination in the Northern industrial zone of Pavlodar using an experimental study; to determine the stability of insoluble mercury compounds formed by the preparation at extreme winter and summer temperatures and seasonal fluctuations in open ground. Soil samples were taken for the study at 11 points in the centers of mercury pollution. Laboratory studies were carried out in an accredited analytical laboratory of the Testing Center of JSC Caustic. Soil samples were treated with Denite®, the preparations obtained were stabilized, and water extracts were prepared. The content of mercury in soils, extracts from them, and plants was determined by the atomic absorption method on a RA-915+ spectrometer equipped with RP-91 and RP-91S attachments. As a result of research, the effectiveness of Denite® in the chemical binding of mercury in the soil has been proven and its optimal dosages have been determined. As a result of the positive tests of the technology of chemical immobilization of mercury, the prospect of a practical solution to the issue of demercurization of mercury-contaminated soil on the territory of the Northern industrial zone appeared.

Main problem: the article is devoted to the issue of designing basic recipes for dairy products using mathematical modeling methods. The author analyzed the problems in the field of food technology and concluded that mathematical modeling is used in the following areas: clarification of technological process modes, designing recipes and assessing the quality of finished products, as well as predicting the shelf life of new products when they are put into production. The use of dihydroquercetin as a drug that prevents the oxidation of milk fat in the design of dairy products is substantiated. Mathematical modeling was carried out on the basis of experimental and analytical material obtained in laboratory and production conditions. Based on the maximum value of the objective functions, the optimal normalized mixtures and the maximum allowable concentration of dihydroquercetin were selected. The analysis of the received mathematical dependences and models is carried out, the system of linear equations is made. Purpose: to study the effect of natural bioflavonoid antioxidant on the oxidative processes of milk fat and the viability of lactic acid cultures and their associations by mathematical modeling in order to use it in the technology of a new product; conduct an analysis of mathematical dependencies and models, compose a system of linear equations. Methods: the article uses the method of mathematical analysis and the matrix method. Results and their significance: a mathematical model was developed for the dependence of the viability of probiotic cultures on the mass fraction of dihydroquercetin when designing recipes for a creamy-protein curd product, a matrix of the chemical composition of dairy ingredients was presented, and a system of linear equations for basic recipes was compiled. In the course of the study, the spatial configurations of dihydroquercetin, as well as its effect on the oxidative processes of milk fat, were studied. Mathematical modeling of experimental data on the study of the effect of dihydroquercetin on the viability of microorganisms with probiotic properties was carried out. The normalization of the complex of obtained results on the study of the influence of the mass fraction of dihydroquercetin on the fermentation process was studied. Controlled factors characterizing the process of fermentation of model media with dihydroquercetin have been determined. A rationing of the dihydroquercetin complex of more than 0.50% was established; the target function decreases to its minimum value of 0.53 with a mass fraction of dihydroquercetin of 1.00%.

In the dairy market of Kazakhstan, the demand for mass-produced dairy products is decreasing and expanding to innovative fermented milk products for functional nutrition. The main feature of the new technology is multicomponent formulations, which include the main raw materials and biocorrectors, ensuring their high biological and nutritional value. New dessert products are prepared on a dairy or protein basis using vegetable ingredients, fermented with strains of dry starter cultures of direct application or immobilized starter culture Bifimm probio. The purpose is to apply immobilized living cells of pure cultures of lacto- and bifidobacteria as a biocatalyst for the fermentation of dairy-vegetable media. During the study, the method of immobilization of microbial cells in biopolymer gels was used. The most effective method is the inclusion of cells in an aqueous solution of biopolymers with a concentration of 25 %. For immobilization, pure cultures of lactic acid and bifidobacteria were selected in the gel as part of the concentrates "BK-Altai-LS Bifi", "Poleznaya Partiya", "Genesis", "Narine", "Bio-yogurt Vivo", and the main prescription ingredients were selected: milk with a mass fraction of fat of 1 %, 2.5 %, 3.2 %, natural grain additives, jams, juices, nuts. Formulations, technological schemes and production methods, prototypes were developed, quality and safety indicators were determined. Studies have shown the effectiveness of immobilized starter cultures in the formation of fermented dessert products. Out of 20 prototypes with the best indicators, 5 samples were selected, in which the optimal ratio of milk, probio Bifimm starter cultures and biocorrectors averaged 70:20:10. The quality and safety analysis showed that new fermented milk products using immobilized starter cultures have a positive effect of more than -70 % compared to direct-use starter cultures, have functional properties and can be used for healthy nutrition in Kazakhstan.

It is known that the nutritional value of proteins is primarily characterized by the composition of essential amino acids and is determined by their accessibility. Not just proteins are necessary for the good functioning of the human body, but a certain amount of essential amino acids. Since the lack or absence of any of them causes serious health problems. The problem of protein malnutrition is global for many reasons and to solve it, it’s necessary to study the prospects for the possible use of non-traditional sources of dietary protein, namely vegetable protein. Considering this, the article presents the results of studies conducted over several years, the objects of which were dairy and vegetable products and protein hydrolyzate from chickpea flour. At the same time, the possibility of its use as a filler of plant origin to improve the physicochemical and structural-mechanical properties of a new type of finished product was determined. The purpose of these studies is to develop a recipe and determine the technological stages of production of a new type of product of dairy and vegetable origin, which has a functional focus, in which vegetable products are used together with dairy components. It should be noted that when selecting components, preference is given to raw materials grown in the local region. When developing the recipe, the optimal amount of chickpea protein hydrolyzate to be added was determined, which makes it possible to give the finished product not only attractive commercial characteristics, which the modern consumer primarily pays attention to, but also to obtain such product properties that will help strengthen the immune system and the resistance of the human body to adverse conditions environment, what is especially important for the younger generation. When developing the technology of a new dairy-vegetable curd mass, the optimal modes of each technological operation and the stage at which it is most expedient to apply a vegetable component are determined. Launching the developed product into production, the manufacturer will not face the problem of the lack of the necessary equipment and its expensive acquisition, since the production organized according to the proposed technology is maximally adapted to the equipment available at enterprises engaged in the production of cottage cheese and curd products.

Main problem: the development of a new direction in the food industry – the so-called functional nutrition, which means the use of such products of natural origin, which, when systematically used, have a regulatory effect on the body as a whole or on its specific systems and organs, has been widely recognized all over the world: immunostimulants, biocorrectors for blood pressure, cholesterol levels, etc. When creating functional dairy products, ingredients of plant origin are increasingly included in recipes, which are sources of dietary fiber, vitamins and microelements, organic acids and other biologically active compounds, which can also serve as flavor fillers. Purpose: to develop a technology for the preparation of a fermented milk product with the addition of an extract from gourds. To do this, it was necessary: to select the amount (dose) of the yoghurt starter introduced into the prepared milk, and also to investigate the effect of temperature on the fermentation process of the drink; to investigate the amount (dose) of the vegetable filler introduced into the mixture and its effect on the organoleptic characteristics of the drink; to investigate the organoleptic properties of the drink with the melon culture extract added to it before fermentation and after fermentation; to investigate the effect of vegetable filler on the fermentation process; to investigate the effect of the dose of vegetable filler on the process of acid formation; conduct microbiological studies of milk and vegetable yogurt; to investigate the change in the acidity of milk and vegetable yogurt during storage; to investigate the effect of the freezing process on the chemical composition and biological value of the extract. Methods: when performing the practical part of the work, physicochemical, organoleptic and microbiological studies were used. Results and their significance: in the course of the study, it was concluded that by adding an extract of gourds to the technology for the preparation of fermented milk products, a new fermented milk product can be obtained that meets all physicochemical, organoleptic and microbiological requirements. As a result, an original method for the production of a fermented milk drink containing an extract from a melon culture was developed.

The present stage of development of power systems is characterized by the need to increase their intelligence, that is, the formation of an environment capable of solving the problems of effective management of all components included in the power system. One of the features of modern energy systems is an active consumer, that is, a consumer who has the opportunity to optimize the schedule of loading their capacities, planning energy consumption, intellectualization of energy consumption. In addition to the fact that there are digital systems for collecting, processing and presenting information, as well as transmitting this information via the Internet, to solve the most difficult task of managing power systems, it is necessary to develop a large number of models adequate to real processes that can describe the processes taking place in the power system under consideration. The purpose is to develop models capable of adequately describing the interrelated processes occurring in the considered elements of the power system, as well as in the aggregate of related elements; development of methods that allow solving problems of effective control of elements of energy systems on the basis of the proposed intelligent models. To solve the problem of increasing the intelligence of the power system, nonlinear adaptive models of electrical complexes of an energy-intensive enterprise included in the power system were developed on the basis of balance equations and artificial intelligence methods. The production of alumina with the properties of inertia, nonlinearity and closure is chosen as the production under consideration. This type of production was chosen as the most difficult to predict due to the unpredictability of changes in energy consumption during the transition to other modes of its operation, associated, for example, with the receipt of raw materials with a different chemical composition for processing. Static and dynamic models of energy consumption of electrotechnical complexes with continuous inertial nonlinear closed production based on artificial intelligence methods have been developed, which makes it possible to eliminate the need to use long time series of retrospective data. For the considered type of continuous energy-intensive production, dynamic characteristics of energy consumption and technological processes are obtained from the main controlled parameters, which make it possible to predict emergency situations and partly man-made disasters. On the basis of a genetic algorithm, a multiparametric optimization problem of energy management of continuous production has been solved, taking into account technological parameters and cost factors.

The article is devoted to the study of the main types of retort packaging, as well as polymer and combined materials used for its manufacture. The authors have compiled a classification of retort packaging presented on the modern market, investigated the technological properties of packaging materials, and also determined the requirements for modern retort packaging: resistance to sterilization at a temperature of at least 120°C, steam and moisture resistance, chemical inertia to canned products, tightness, low gas permeability. It has been established that in order to give the retort packaging the required properties, it is made of multilayer polymer or combined materials, each of the layers of which performs certain functions. It is determined that due to the barrier properties of polymer and combined materials with respect to oxygen, retort packaging provides shelf life of canned products up to 5 years, which allows the use of retort packaging made of polymer and combined materials as an alternative to glass and metal packaging. In experimental studies, the composition of the outer layers of modern retort packaging was analyzed and it was concluded that polypropylene or polyethylene terephthalate are most often used, since these polymer materials are thermally and chemically resistant, vapor- and moisture-proof. It is established that materials that are barriers to gases are used as the middle layer – aluminum foil, metallized films, ethylene vinyl alcohol, polyamide. It is proved that polymer co-extrusion, multilayer injection molding or lamination is used for the manufacture of such materials and packaging. The data obtained indicate the high barrier properties of combined packaging materials, therefore, the thermal and chemical stability of the polymer and combined materials used makes it possible to use retort packaging for packing almost all groups of canned products.

Main problem: the article substantiates the relevance of the development and production of specialized food products for athletes and the population involved in sports, fitness as part of a healthy lifestyle. Purpose: development of specialized food products with a general health-improving character, intended for the population involved in sports, fitness and experiencing increased physical exertion. Methods: the obtained results were statistically processed using the methods of correlation and regression analysis and standard software packages "Statistica 6.0". Measurements of chemical, microbiological, organoleptic parameters were carried out using standard methods and modern instruments: an analyzer, an analytical analyzer electrophoresis cell, a high-performance liquid chromatograph, and others. Results and their significance: a scientific concept for the creation of fermented specialized milk-based food products for sports nutrition was formulated; biotechnologies for specialized food products for athletes were developed. For the practical implementation of the results of analytical and experimental studies, packages of regulatory and technical documentation for the production of new products have been developed, which have been tested in the production conditions of existing enterprises in the dairy industry.

The article contains the results of a research work devoted to an important problem - the development, production and delivery to the consumer of fermented dairy products of a healthy diet fortified (enriched) with milk protein, a vitamin-mineral complex, and probiotics and prebiotics. Purpose is based on mathematical modeling of experimental data, to determine an effective fermented food system for use as the basis of a fortified (enriched) curd product for a healthy specialized diet; to develop a recipe and technology for its production; to study the nutritional, biological and energy value of a new product. Modern technologies and equipment were used in experimental studies: ultrafiltration, fortification, etc. The studies were carried out by standard physicochemical, microbiological methods in three to five repetitions. Mathematical and statistical processing of experimental data was carried out using the program "Statistica-6.0". A recipe and technology for the production of a curd product for a healthy specialized diet has been developed. Its nutritional, biological and energy value has been studied. The developed recipe and biotechnological parameters for the production of the curd product were tested in the industrial conditions of the leading enterprise JSC "Lyubinskiy MKK". The quality and safety of the curd product was studied in the laboratory of techno-chemical control of FGANU "VNIMI" (Moscow).

The article is devoted to the development of technological parameters for the production of gluten-free pasta, as well as to the study of the influence of physico-chemical factors on the formation of the structure and organoleptic parameters of gluten-free pasta. The authors studied modern approaches to the production of gluten-free food in Kazakhstan. During the study, the main types of raw materials used in the production of gluten-free pasta of functional orientation were identified. For the production of a new product, a reasonable choice of raw materials and functional ingredients was carried out, the formulation and production technology were developed, all temperature and time modes were described, physico-chemical, organoleptic parameters of the new product were studied, a production flowchart was developed. The purpose of the article is to develop the technology of gluten-free pasta enriched on the basis of corn, rice flour and meeting the requirements for specialized food products, with the addition of functional and flavoring ingredients to expand the range of gluten-free products in the Republic of Kazakhstan. In experimental studies, the formula of a new gluten-free paste based on rice and corn flour with the addition of flaxseed flour, soy protein isolate «EdimCo», xanthan gum, dietary fiber (psyllium), Supermak booster was developed. The complex results of organoleptic and physico-chemical parameters of whole-grain flour for the production of new gluten-free pasta are presented. The results of organoleptic and physico-chemical indicators, as well as safety indicators of finished gluten-free pasta are presented. The article presents the technological parameters and time modes of the production process of fresh pasta, including the following basic operations: preparation of raw materials at t = 10 0C, kneading pasta dough at t = 40-45 0C, vacuuming at 40-10 kPa, pressing (extrusion) at 7 min, 10-12 MPa, drying and stabilization at 10-12 MPa, cooling of dried products t = 20-25 0C 4 hours, packaging of finished products at t = 35 0C and relative humidity 70 %.

Development of regulatory and technical documentation for the examination of equipment operating under pressure

The article is devoted to the development of technology for meat products of the "Halal" category. The authors consider the main problems of the meat industry in the field of the development of meat products of the "Halal" category in accordance with the National Program "Development of meat farming for 2018-2027", as well as the peculiarities of the production of meat products of the "Halal" category in Kazakhstan. A technology for the production of sausages for frying of the "Halal" category based on minced turkey and beef meat for functional nutrition has been developed, organoleptic, physico-chemical parameters of the new product have been studied. The mass fraction of protein is 8 %, the mass fraction of fat is 7 %. The authors of the article have developed a technological scheme for the production of a new product of the "Halal" category, which includes: acceptance of raw materials, cutting, deboning, veining, grinding to 2-3 mm of meat raw materials. At the next stage, meat is cooked at t 2-4 0C for 12 hours, minced meat is prepared (adding jerusalem artichoke 3 %, adding vitamin premix "Rovifarin" in an amount of 1.0 %, as well as spices and garlic according to the developed recipe). At the next stage, the minced meat is stuffed into natural shells with a diameter of (32-44) mm, cooled at t (4 + 2) 0C, stored at t (4 + 2) 0C for 36 hours. During the microstructural study of a sample of boiled and smoked sausage produced using traditional technology, it was found that the mass of the sample was formed from large fragments of muscle, fat and connective tissue (0.7-1.4) microns. The layout of the structural elements of the minced meat is dense, vacuoles and microcapillaries are rounded in shape, sometimes without clear boundaries, merged, with a size of (60-300) microns.

The development, grovth and productivity of livestock depend primarily on providing it with a variety of nutritious feeds. Daily feeds should consist of microbiologically synthesized protein, as well as a variety of seeds, mineral and vitamin supplements of animal and vegetable origin. Indeed, the maximum disclosure of the genetic potential of livestock largely depends on both the quantity and quality of feed. One of the stages of feed quality assessment is the measurement of their chemical composition. The chemical composition is not always constant and depends on many factors, including the species composition of plants, fertilizer application rates, climatic conditions and storage methods. The least accumulation of moisture in the soil was observed in areas where pasture grasses were regularly treated with wormwood. Pacture productivity was also the lowest in the control plots, where the average phyto-chemical composition over three years showed that the dynamics of protein content was the same in all pastures – the protein content reached a maximum at the beginning of the growing sea son and decreased from spring to autumn, while the lowest content of crude protein during harvesting in summer was in control plants of varieties