The scientific journal

Bulletin of the Innovative University of Eurasia

Submit an article for review by the editorial board

+7 (7182) 31-64-83

journal@ineu.kz

Back

Search on site

Search results: hazard analysis.

Number of results: 29


Improving the efficiency of the road transport power supply system
Annotation:

The article discusses a way to increase the efficiency of automobile operation by improving methods for ensuring the operability of electrical equipment based on the diagnosis of generators by output voltage. As a diagnosis, it is proposed to perform a spectral analysis of the generated voltage in idle mode and to determine the state of various generator elements from the results. The effectiveness of the proposed solutions is determined by the non-separable diagnostics of the generator, which, based on a thorough examination, can determine the state of various elements of the generator. This method does not require taking the generator out of operation, does not depend on its design and can be used in difficult operating conditions to obtain preliminary information about the state of the generator at the initial stage of maintenance.

Year of release: 2020
Number of the journal: 1(77)

Review of methods of diagnosis of failures of electric motor
Annotation:

In the article different methods of diagnosis of failures of electric equipment which are most often found in the industry today. The classification of methods for diagnosing motor failures is presented, and the advantages and disadvantages of existing methods for diagnosing failures in electric equipment are revealed. Based on the description of the methods of diagnosing electric equipment failures, a comparative table was compiled. Analyzing the comparative table of methods for diagnosing failures of electric equipment, the most current method for diagnosing the technical condition of the electric motor was determined.

Year of release: 2016
Number of the journal: 4(64)

Behavioral safety audit as a tool for changing the work culture
Annotation:

The article presents new tools for managing labour safety to conduct behavioral safety audits, transforming meetings and labor protection councils into cascade committees, to implement technical and safety standards, and to use new assessment and motivation system and methods of internal incidents investigation.

Year of release: 2017
Number of the journal: 3(67)

The review of national legal instruments dealing with chemicals management issues
Annotation:

This article considers chemical safety as a system of measures aimed at protecting vital human interests against adverse chemical effect from threats of processing, storing and destroying hazardous chemicals. Chemical safety is ensured by a complex of legal, organizational, financial, material and informational measures intended for prevention and elimination of real and potential security risk, mitigation of their consequences.

Year of release: 2017
Number of the journal: 4(68)

Development of a quality control system based on the principles of HACCP for the production of sour cream at a diary factory
Annotation:

The article is devoted to risk analysis, methods of ensuring dairy products safety. Furthermore, the author dwells on such tool of quality control as a decision tree. The article presents the plan of HACCP for a diary enterprise on an example of the production a sour cream with 15-20 % of fat content.

Year of release: 2018
Number of the journal: 1(69)

The use of quality and safety management systems in dairy plants
Annotation:

Аt present, dairy enterprises use a system for analyzing and monitoring critical control points, as well as a quality management system, to produce high-quality and safe products. These systems take into account factors that may affect the production process and other components by identifying hazards from the procurement of raw materials to the consumption of products for food. The purpose of the article is to study the role and necessity of applying quality and safety management systems at dairy enterprises and reducing the risk at all levels of production

Year of release: 2018
Number of the journal: 3(71)

Floodwaters are under control
Annotation:

During the preparatory activities for the preparation and conduct of the KShU, the civil defense plans for peace and wartime were adjusted and clarified, the calculations of forces and resources for conducting emergency response activities were refined and their readiness checked. Checked the combat readiness of the units taking into account work in extreme conditions and the provision of personnel with equipped interchangeable clothing. Additional briefings have been organized on compliance with safety measures for fighting fires and performing emergency rescue operations. Autonomous sources of energy supply, stocks of material and technical, food reserves were checked. In general, the forces and facilities of the units of the Service are on daily round-the-clock alert duty and are ready to meet the set tasks for eliminating emergencies and situations at the first alert.

Year of release: 2019
Number of the journal: 1(73)

The study of nutritional values and organoleptic properties of poly-grain extruded mixture
Annotation:

Among many environmental conditions that affect a person, the most important factor is nutrition. Today, there is no doubt that there is a direct link between nutrition, health and disease. Proper nutrition ensures normal growth and development of a person, contributes to the prevention of diseases, has a positive impact on life expectancy and creates conditions for adaptation to the environment. A very actual topic for public catering in the Republic of Kazakhstan, namely for fast food companies, is the development of new recipes and culinary products from relatively inexpensive vegetable raw materials, as well as qualitatively new food products with a purposefully changed chemical composition. One of the main ways of solving problems of expanding the production of products for quick service, as well as products for dietary and therapeutic and preventive nutrition is the use of sprouted grains and beans. In this article, poly-grain mixtures of sprouted wheat and extruded soy beans in different ratios are studied and considered. Poly-grain mixtures developed by us are balanced in nutrients, vitamins and amino acids. The research was carried out on the basis of the accredited testing laboratory of RUBICOM enterprise LLP and the scientific laboratory of the Innovative Eurasian University. The purpose of this work is to study a promising method for increasing the nutritional value of grain mixtures by extruding them at different temperature conditions. To achieve this goal, the following tasks were planned: – to study the grain of soy beans and sprouted wheat on the organolepti c characteristics and chemical composition of the poly-grain mixture; – examine the chemical composition of the poly-grain mixture before extrusion; – choose the optimal mode of the extrusion process; – study and analyze the chemical composition of poly-grain extruded mixture; It should be noted that we have developed for the first time the optimal technological mode of extrusion of poly-grain mixture from sprouted wheat and soy beans, and the physical and chemical composition of the poly-grain mixture was studied. The results of the research presented in this paper are the basis for the development of recipes and technologies for fast food products. The reliability and validity of scientific statements is confirmed by the choice of modern methods of chemical composition analysis.

Year of release: 2020
Number of the journal: 2(78)

Organization of activities for the treatment and disposal of industrial waste at the landfill
Annotation:

Environmental protection measures are based, among other things, on the rationalization of the organization of the production waste management process. Population growth and the race to industrialize pose a serious threat to the ecosystem. Currently, the average global waste generation per capita is 494 kg / year. A large number of industrial enterprises operate on the territory of Kazakhstan. The range of manufactured products is very wide: household items, transport, building materials, equipment and much more. Each type of production is inevitably a source of a large amount of industrial waste, annually at the enterprises of Kazakhstan up to 600 million tons of waste are generated, three percent of which are recycled. On the territory of Pavlodar region there are enterprises in the field of metallurgy, mechanical engineering, chemical industry, construction industry enterprises, light industry, about a hundred in total. In this connection, the problem of treatment and disposal of industrial waste in Pavlodar region is very relevant. The article discusses the system of waste management in order to reduce their impact on the environment, activities for the disposal, transportation, disposal of waste, as well as their disposal at the industrial waste landfill in Pavlodar. The landfill in question is intended for the reception, temporary storage and disposal of non-hazardous solid industrial waste of the «green» level: waste and scrap of chromium, cadmium, aluminum, copper, lead, zinc, manganese, plastic waste, polyethylene, abrasive, rubber waste, ash and ash and slag waste; and also «amber»: waste containing mercury, arsenic, lead, waste batteries, phosphoric slags, waste oils, oil sludge. The scheme of organizing waste storage works is considered. The volume of accepted and recycled waste, as well as those placed at the landfill and used for their own needs, was analyzed, including construction waste, waste sleepers, ash and slag and abrasive scrap. The solution to the problem of industrial waste disposal is associated with the need for innovation and the introduction of new technologies and equipment.

Year of release: 2020
Number of the journal: 3(79)

Comparative analysis of set expressions with the zoonymic component of "dog" in English and Kazakh languages
Annotation:

ing the image of a dog. The purpose of this study is to consider the national and cultural specifics, reflected in the stable expressions of the English and Kazakh languages with the "dog" component. The article provides a brief overview of works related to the issues of phraseology in English and Kazakh. The work was based on general scientific methods: induction and deduction, analysis and synthesis. The work with the collected card index of stable expressions was carried out by the method of continuous sampling, using the descriptive-analytical method. An important place in the work with the material was given to the Вестник Инновационного Евразийского университета. 2020. № 4 ISSN 1729-536X 17 methods of definitional, contextual and typological analysis. Using the comparative-comparative method, national-specific and universal features of zoonyms in English and Kazakh languages were determined. The material of the research was a card index of phraseological units of the English and Kazakh languages (more than 160 units) which were selected using the method of continuous sampling from phraseological dictionaries of the English and Kazakh languages. When analyzing the authors of the article relied on materials from phraseological dictionaries in English and Kazakh languages. In the course of the analysis, groups of phraseological units were identified and their differences and similarities in the compared languages were identified, as well as their national and cultural specificity, based on the action of universal cultural codes; the national and cultural specificity of zoonyms is determined by a number of extralinguistic factors: the location of the country, the living conditions of the people, their customs and traditions, history, religion and socio-political structure. All this secures national-specific connotation to zoonyms and determines their productivity. The results of the study showed that through the prism of axiology, an analysis of English and Kazakh stable combinations with the "dog" component, reflecting the paradigm of values (general cultural and national-cultural) and anti-values of the corresponding ethnic communities, was presented, as well as universal values representing at the intercultural level. The results of the study showed that through the prism of axiology, the analysis reflects the paradigm of values (general cultural and national-cultural) and anti-values of the corresponding ethnic communities. The research results have both theoretical and practical significance; it will be additional material for elective courses on the subject of "Lexicology" taught at the faculties of philology and foreign languages in higher educational institutions.

Year of release:
Number of the journal:
Heading: Humanities

Initiation of pre-trial investigation in cases of kidnapping: essence and characteristics
Annotation:

In this article, the author examines the features of the pre-trial stage of the investigation in the investigation of kidnapping. The initial stage of the investigation consists of: starting a pre-trial investigation, conducting urgent investigative and procedural actions and attracting a person as a suspect. The initial stage of the investigation of a crime, including kidnapping, is crucial for the implementation of further qualitative and offensive investigation of criminal acts. The purpose of this article is to study the natureand features of the beginning of the pre-trial investigation of kidnapping. In the course of the study, the author used such methods of scientific research as: dialectical, system, method of qualitative and quantitative analysis, generalization and study of literary sources, comparative legal, historical-legal, system-structural and formal-logical methods, as well as the method of system analysis. Activities to identify signs of a crime must be considered through the prism of the beginning of a pretrial investigation. Currently, the beginning of a pre-trial investigation, from the point of view of criminology, refers to very specific types of organizational activities at the initial stage of the investigation of a kidnapping. The detection and investigation of kidnappings is highly complex, requiring law enforcement officials to maintain strict secrecy. If there is a reason provided for by the criminal procedure law to start a pre-trial investigation, the investigator or an employee of the body of inquiry is obliged to establish the presence of sufficient data indicating signs of kidnapping. To do this, it is necessary to carefully study the content of the application, compare the available factual data. The beginning of a pre-trial investigation should not be an end in itself of the activities of the pre-trial investigation bodies. At the same time, their offensive and proactive work on all received facts, information and operational materials is extremely important, because it is the embodiment of the active position of the law enforcement system inthe direction of preventing and suppressing possible illegal encroachments on personal freedom, including the suppression of those criminal actions that are in the stages of their preparation or beginning.

Year of release:
Number of the journal:
Heading: Law

On the question of forms and types of property rights in civil law
Annotation:

The right of ownership, like property itself, occupies one of the mainplaces in public life. Statutory regulation of property relations in the Republic of Kazakhstan existed throughout the entire period of statehood formation. Today, property relations are regulated by the norms of various branches of law. But civil law regulation occupies one of the most important places in the system of regulatory regulation. This article deals with a comprehensive analysis of the main legal concepts, such as property, owner, subject of property rights, as well as forms and types of property, the grounds for the emergence and termination of property rights and ways to protect and protect the absolute right of the owner. A certain thing may belong to several persons as common property. In this case, the right of ownership is distributed among several owners (co-owners). The totality of legal norms on common property forms the institution of common property law. The purpose of this work is a comprehensive analysis of the main legal concepts, such as property, owner and subject of property rights, as well as forms and types of property, the basis for the emergence and termination of property rights and the definition of ways to protect and protect the absolute right of the owner. The means of achieving this goal is the study of the works of Kazakh legal scholars, the study of the analysis of practical materials. The article uses the following methods: comparative-legal, system-structural, formal-logical, as well as the method of system analysis. The legislation of Kazakhstan provides for two subjects of State property that have the right to act on their own behalf: the Republic of Kazakhstan as a whole (in respect of property constituting republican property) and the administrative – territorial unit (in respect of property constituting municipal property). That is, in civil circulation, data are carriers of state property rights. Depending on the tasks performed, the State exercises the powers of the owner on behalf of one of the specified entities. The Republic of Kazakhstan and the administrative-territorial unit are not legal entities. However, unless otherwise provided by legislative acts, they are subject to the rules governing the participation of legal entities in relations regulated by civil law. The state and administrative-territorial unit, as special subjects, have all the rights ofsubjects of civil legal relations and are limited in legal personality only by the current legislation.

Author: Zh.Zh. Talipova
Year of release:
Number of the journal:
Heading: Law

Residual chemical analysis of amines used as corrosion inhibitors
Annotation:

Main problem: Presence of acidic chemicals such as carbon dioxide and hydrogen sulphide, composition of production fluids triggers corrosion. Corrosion in oil and gas industry leads to deterioration of equipment since most of equipment is made of metal alloys. Application of inhibitors is one of the corrosion mitigation methods that needs to be controlled because it is important to identify optimal concentration of the chemicals in production fluids.Residual chemical analysis plays an important rolein identifying the appropriate dosage of corrosion inhibitors and its correction. It is imperative to find the most optimal concentration of amines due to the fact that both overdose and underdose could lead to equipment deterioration. The chemical analysis is hindered by complexity of mixtures that are applied in petroleum industry. Purpose: The main purpose of this article is to find out the most effective method of residual chemical analysis for inhibitors used against sweet and sour corrosion by studying and analyzing corresponding literature review. The analysis should be carried out with robust, sensitive, and accurate instrumentation. Methods :Theoretical study of composition and mechanism of amines used in oil and gas industry as corrosion inhibitors and selection of appropriate instrumental analytical techniques for the residual analysis. Results and their importance: After careful studying and consideration of modern instrumental analytical techniques the most optimal and efficient method in terms of robustness, time saving and cost was selected. Ion chromatography is an adequate method to carry out residual chemical analysis for amines that are used as inhibitors in oil and gas industry to prevent sweet and sour corrosion.

Author: Zh.S. Kassenova
Year of release:
Number of the journal:

The main directions of economic development of the region through the prism of the impact of the coronavirus pandemic
Annotation:

The COVID-19 coronavirus pandemic has brought about a new economic reality, to which every economic entity must adapt, regardless of the scale: within a region, a country, or the whole world. The article examines the regional economic mechanism in the context of the pandemic in the context of the interaction of the market mechanism of self-development and the control influence of the regional authorities. The destabilization of the economic situation in the regions as a result of the pandemic and related restrictions poses the problem of revising the main directions of regional policy To achieve the set goals and objectives, the general methods of empirical and theoretical research were used: analysis, synthesis, induction, deduction, generalization, description. Three spheres play a key role in the economy of Pavlodar region: industry, trade and transport. Just how to remain positive dynamics in terms of industrial production and maintained the services will depend on the development of the region, the main indicators which are discussed in this article through the prism of the events in the context of the pandemic. The necessary health measures taken in response to the pandemic have led to a severe reduction in mobility and are accompanied by high economic costs. The quarantine measures have had a direct impact on businesses, especially microbusinesses. To support this sector, tax incentives were provided, lending was expanded, and measures were taken to further facilitate the business environment. The article reflects only a small list of issues that required changes in the economic mechanism in the context of the pandemic and the introduction of restrictive measures, as well as the strengthening of the influence of external control on the economy. At the same time, the state as whole and individual regions, taking into account their potential and the actual situation in the economy, need to find an optimal balance between the prohibitions and restrictions imposed to ensure the safety of human health and the preservation of the economy in a functional mode, work and income of employees. This problem of finding a balance between prohibitive and permissive measures requires further analysis. At the same time, the state needs to develop and apply tools of a systematic nature, focused on the long term.

Author: Z.A. Arynova
Year of release:
Number of the journal:

Principles of using ornamental motifs to create a collection of modern youth clothing
Annotation:

The main problem of the article discusses the methods of developing a collection of casual clothing with elements of ethnic style, using the example of innovative technologies in the field of creating ornaments for clothing. Factors of formation of ornaments based on the structure of the human body are justified. The author considers the factors of shaping, based on special visual features of clothing in connection with ergonomic factors. Study of the specifics of ornamental motifs to transform them into a component of modern youth clothing. The authors of the article monitored the environmental approach, that is, the acquisition of knowledge about cultural values based on the selection of all the best that was created by the people, introduction to cultural folk traditions, dialogue between man and culture. When writing the article, we used author's and experimental research methods, fixing information in tables and author's sketches. The study of categories and definitions was carried out by the method of selecting and classifying information, as well as its analysis. Comparative analysis of forms of traditional and modern culture, study of bibliographies on architecture, art, philosophy, psychology; analysis of materials of scientific monographs, abstracts and dissertations, articles, creative essays of masters of architecture and art, from the point of view of the concepts, principles, conceptual and terminological formulations contained in them. In addition, private scientific methods are used: analysis of literary sources to identify current trends in the formation of art. Аs the results of the research, a collection has been developed that considers various types of clothing decoration, uses methods for including ornaments in the structural structure of the costume and provides models, calculations and drawings. The author's collection justifies the use of ornaments in connection with the selected artistic and figurative task of the collection, as well as in connection with its functional purpose. All these factors are formative. And the practical experience of this research shows the relevance of this topic in connection with the need not only to promote the historical achievements of Kazakhstan's culture to the masses and popularize them, but also as a method that helps to understand the possibilities of its translation into modern design objects. Keywords: ornament, youth, model, collection, Kazakhstan.

Year of release:
Number of the journal:

Study of international experience in the field of industrial safety
Annotation:

Currently, close attention is paid to industrial safety at hazardous production facilities. Compliance with industrial safety requirements is directly related to the risks of accidents that can lead to man-made disasters, negatively affect the health and life of the population. As in any other industry, there are problems in ensuring industrial safety. There are several reasons for this: the backlog of standards from scientific and technological progress, the exclusive competence of state authorized bodies, and the lack of a risk-based approach. After the collapse of the USSR, the requirements of industrial safety in the Republic of Kazakhstan have practically not changed: laws and statutory instruments (hereinafter-the LSI) are approved and put into effect, after which they are constantly changed and supplemented; the presence of national and international standards, which, in fact, are revised on the basis of the USSR standards, taking into account the influence of the realities of the time. It can be concluded that the current standards are not focused on the future, scientific and technological progress, innovation, so they are constantly undergoing changes, thereby adapting to the necessary requirements that dictate modernity. State regulation does not contribute to the effective development of industrial safety. This is due to the fact that the state performs exclusively supervisory functions (thus it is exclusively educational in nature), and there is no dialogue between authorized state bodies, expert organizations, scientific organizations, and testing laboratories. If we consider the experience of the Russian Federation in the field of industrial safety, then it makes no sense to accept even some experience, since: similar to the Kazakhstan’ LSI and regulatory and technical documentation (and their constant dynamics), the development of cooperation with the Russian Federation within the framework of the Eurasian Economic Union. Accordingly, it is advisable to consider the experience in the field of industrial safety in Europe and the United States of America because of the effectiveness of regulation and supervision than in the Republic of Kazakhstan and the Russian Federation. This article provides information about international experience in the field of industrial safety in the United States and the European Union. The tasks of state regulation in the field of industrial safety in the Republic of Kazakhstan, the Russian Federation, the United States, and the European Union are described in detail. The analysis of normative-legal acts and normative-technical documentation is carried out. Based on the analysis of international experience, solutions to problems in the field of industrial safety for the Republic of Kazakhstan are essentially presented. The purpose of this article is to reveal the problem in the field of industrial safety in the Republic of Kazakhstan and international experience that the Republic of Kazakhstan can borrow in order to effectively ensure industrial safety. Study of international experience (USA, EU countries, Russia) in the field of industrial safety in terms of: analysis of standards; regulation (control and supervisory functions) to ensure safety. The results of this article will reflect the problems that hinder the effective provision of industrial safety in the Republic of Kazakhstan and essentially suggest ways to solve them.

Year of release:
Number of the journal:

Some aspects of justification of acceptable risk levels in oil refineries
Annotation:

Currently, the problems of environmental safety are facing society. The industry develops every year. In this critical economic situation, the oil industry is a stimulant for the economic sector in Azerbaijan. The level of development of this industry is also relevant due to other reasons: sociological, technological and features of the economy of Azerbaijan. The production activity of oil processing, concentrating harmful substances and energy, is a source of man-made danger and pollution of the natural environment. The risk management process mainly consists of three stages - risk safety analysis, risk assessment, which is carried out in comparison of calculated and actual risk levels, the so-called acceptable risk levels and the adoption of appropriate regulations and management decisions. One of the factors that should be taken into account when assessing risk and safety is to determine the necessary costs. Since these costs are paid directly to the company, they try to minimize them as much as possible, which reduce the accuracy of risk assessment. One of the objectives of the study is to determine the optimal value of the necessary costs. It is established that the less reliable the method, the lower is the cost of its implementation. The methodological basis of the work was scientific works on these problems of scientists-economists, mathematicians on safety and risk assessment at industrial enterprises. When developing the presented methodology, computational algorithms developed by Dow Chemical were used. This company has collected a large volume of material on accident statistics, taking into account damages. Based on the obtained and experimentally verified data, a system of indices has been developed, an assessment of various indicators for qualitative and quantitative risk assessment of oil refineries. The analysis of the technogenic danger of oil refineries makes it possible to determine ecological and economic losses and choose rational possibilities of acceptable risk. The required costs, depending on the level of risk, are determined based on an increase in the accuracy of calculating the probability of occurrence of the cause of risks. The article examines the relationship between the expected level of risk and economic losses during oil refining in separate technological units, which allow determining the required level of risk and the expected economic damage.

Author: Kh.B. Gulieva
Year of release: 2021
Number of the journal: 4(84)

International experience in automating public services in the system of land relations
Annotation:

The article considers international experience in automating the system of land relations, aimed at improving the quality and reducing the time for the provision of services by state bodies to citizens and organizations, providing access to information databases, which positively affects the development of effective government decisions for the effective use of land resources, and also improves social welfare. In Kazakhstan, the transfer of land cadastral information to electronic media continues, and the automated information system of the land cadastre is being improved. The task of creating a unified mechanism for state cadastral registration of land plots according to uniform rules and technologies for all, identification and individualization of land plots and objects of immovable property firmly associated with them, for subsequent state registration of rights to land plots and transfer of information to the territorial bodies of the State Revenue Committee, remains relevant. To study the experience of developed countries in the provision of public services in the system of land relations through the development of official land information systems. The article used general scientific methods from general to concrete one, synthesis, theoretical generalization, induction, deduction, and system analysis. Based on the studied experience of developed countries, relevant conclusions and proposals were made: information technology is a useful tool and can help overcome bureaucracy, backwardness, isolation, monopolistic practices, and inefficiency in the public and private sectors; the use of state bodies for effective regulation of geographic information (GIS) systems that allow solving a wide range of tasks, as well as the use of modern information technologies, contributes to the transition of the activities of state bodies to a qualitatively new level of state control, which allows for full transparency of information about the land fund and objects real estate of the country, as well as its availability to the population. The provision of public services in the field of land relations using information and communication technologies reduces entry barriers and transaction costs in business, increases competition, and improves mechanisms in this area.

Year of release: 2022
Number of the journal: 1(85)

Methods of teaching conversational skills, their advantages, disadvantages and overcoming language barriers and anxiety when learning a foreign language
Annotation:

Globalization is an integral part of our life. Therefore, today the relevance of learning foreign languages, in particular English, is beyond doubt, as interest in foreign culture, education, travel, life and work abroad increases. It is known that English is the most widespread international means of communication (including information technology and web space), for most of the population it is the native or state language. This is due to historical, political and geographical prerequisites, as well as socio-economic and cultural development. Proficiency in English opens up great prospects for those who know, but not every person chooses a linguistic direction of study when entering a higher educational institution. Mastering English is a laborious process. In universities of non-linguistic areas, one of the main problems for students is the so-called language anxiety and psychological barriers, especially for those students for whom English is not a core subject or direction of future activity. Overcoming language anxiety and psychological barriers continues to be an urgent issue in pedagogical psychology and the educational process of higher educational institutions. Therefore, the task of the teacher is to create such conditions in his classes so that the student has a desire to learn, develop himself and improve himself. It is necessary to form motivation for conversational skills through psychologically thought-out techniques and methods. The task of the teacher is to direct the student from a conniving and indifferent attitude to study to a conscious and positive attitude. To implement the above, the teacher needs to form the old motives and stimulate new, positive ones. The encouragement of positive manifestations of emotions should be supported, stimulated and helped to realize these emotions by the teacher in the educational process. For example, simple tasks, but at the same time fascinating, the manifestation of sincere emotions in the classroom by the teacher himself and his personal examples inspire students to pronounce their state of mind and experiences. Encouraging and highlighting the activity of students also helps to increase the motivation of learning, especially if they have creative ideas that differ from other fellow students. The purpose of the article is to describe the methods of teaching conversational skills, their advantages and disadvantages and to consider in detail the overcoming of language barriers when learning a foreign language. The methodological basis of the research was the works of such authors as: H.F. Makaev, O.S. Zorkina, V.P. Ipatova, L.V. Barinkova, E.V. Zarubina, E.I. Kaputskaya, E.I. Passov, E.G. Asimov, A.N. Shchukin and others. Critical analysis of scientific and methodological literature on the problem, study and generalization of positive experience of teachers; collection of empirical information, experiment, quantitative and qualitative data analysis. The results of the study can be used in the process of developing practical recommendations for psychological work with students in order to increase their motivation to learn a foreign language. In addition, these results can be used by teachers to correct and improve the effectiveness of the educational process.

Year of release: 2022
Number of the journal: 2(86)

Optimization of the distribution of spent stages to the fall zones of launch vehicles of the Baikonur Cosmodrome
Annotation:

An analysis of the mechanical, chemical and pyrogenic impact of the Baikonur Cosmodrome on the environment showed the presence of man-made impacts of the first stages (FS) used on the ecosystems of the impact zones (IZ). This article presents the concept of a controlled landing of spent launch vehicles with liquid rocket engines (LRE) in the expected zones of damage to the ecosystems of the area while maintaining the energy-optimal launch scenario of the launch vehicle. Purpose of the article - development of effective technologies for reducing the anthropogenic impact during launches of promising rockets from the Baikonur Cosmodrome based on theoretical and experimental studies of innovative technologies: reducing the area of impact of parts from launch vehicles; fire and explosion safety, no danger of rocket launchers; controlled descent of used first stages; To solve the problem, it is proposed to create an additional IASM, which will be included in the environmental management system of the Baikonur Cosmodrome. Possible design solutions are proposed based on the evaporation of untreated liquid waste from the tanks of separated parts, their fire and explosion safety, and the use of the obtained vapor-gas mixtures for controlled unloading of separated parts while moving along the landing trajectory to the optimal area. The authors of the article have developed evaluation criteria that characterize the main environmental indicators of the studied areas: fire hazard, soil cover and impact on vegetation are studied for inclusion in the IASM. There are objective requirements and basic rules for the creation of HIASM, which is an integral part of the environmental management system of the cosmodrome.

Year of release: 2022
Number of the journal: 2(86)

From the history of public administration in Kazakhstan during the period of "war communism"
Annotation:

The article examines the emergence and functioning of the Soviet institutions of power in Kazakhstan during the period of "war communism". On the basis of archival materials and published works, the author analyzes the activities of Soviets and revolutionary committees. The purpose of the article is to study the main trends and features of the development of local government in Kazakhstan in 1918-1921. The study is based on the principles of historical, scientific objectivity and systemic structural-functional analysis. For this reason, the author used such methods as the method of historical reconstruction for the reorganization of the administration of Soviet, party and other local bodies; the method of isolation for the study of local (regional) features in relation to local phenomena and processes in the energy sector; the method of typology, which made it possible to identify and describe different types of local authorities. The authors come to the conclusion that in 1918-1921, during the period of civil resistance, "war communism" and the beginning of the Chamber of Commerce and Industry, bodies of the new Soviet power appeared and operated in Kazakhstan. They are characterized as having an anti-democratic character; strict social orientation; alienation of indigenous peoples; immanent nature for creating conflict situations; choosing non-optimal ways and means of solving a problem situation; unification of party and state. As a result, an overgrown and clumsy class of party classification was formed, which was not provided for by the Constitution of the USSR.

Year of release: 2022
Number of the journal: 4(88)
Heading: Humanities

Energy savings through the use of refractory masonry with a lower thermal conductivity
Annotation:

Main problem: recently, much attention has been paid to energy saving in production, especially when it comes to industrial units that burn fuel. There are several ways to maximize the use of the heat released during the combustion process, for example, to reduce the temperature of the flue gases at the outlet of the unit, by maximizing its use, both in the technological process itself and by installing additional heat-receiving units, for example, air heaters or other heaters. Another way to save money is to reduce heat losses through the lining of these high-temperature units. Metallurgical units that consume a large amount of energy and fuel require an analysis of their consumption, and ways to save their consumption based on the results of the analysis. Purpose: this article considers the possibility of replacing the existing inner insulation layer of the second and third sections of a high-temperature unit - a metallurgical furnace, with a new one with better technical and economic indicators. Methods: the possibility of replacing the existing inner insulation layer of the second and third sections of the high-temperature unit with a new one, with the best technical and economic indicators, was considered. The calculation of heat losses by thermal conductivity through the side surfaces and the roof with new insulation was performed, and the economic efficiency of the proposed solution was proved. Results and their significance: replacing the existing inner layer of insulation - refractory concrete PHLOCAST M30 (thermal conductivity coefficient from 1,4 to 1,45) with the proposed CERALIT GUN HK 70070 (thermal conductivity coefficient from 1,03 to 1,12) will reduce heat loss to the environment, and thus to reduce fuel consumption for the furnace.

Author: А.P. Plevako
Year of release: 2022
Number of the journal: 4(88)

Efficient use of natural pastures in conditions of vertical zonation of the south-east of Kazakhstan
Annotation:

In this article, comprehensive studies have been conducted on the effective use of natural pastures in conditions of vertical zonality in the project territory of Batyr Korday district (Zhambyl region). The data presented shows how important it is to comply with the norms and loads of pastures for further preservation of pasture yields and prevention of degradation. Consequently, there is a need to develop effective and scientifically-based systems of pasture turnover and the introduction of measures to restore pasture lands in the Zhambyl region, taking into account the peculiarities of the climate and geo-botanical indicators. Pasture lands make up about seventy percent of the entire territory of the Republic of Kazakhstan. The potential productivity of these lands reaches twenty-five and more million tons of fodder units. Pasture is the main renewable forage plant resource. It should be emphasized that haphazard use has led to the fact that land degradation processes occur on 27.5 million hectares of pastures, feed capacity decreases, biological diversity decreases, erosion processes manifest themselves, etc. All this requires the development of science-based approaches to the exploitation of pasture resources, compliance with the basic elements of rational grazing. The current situation may have a twofold path of development. The first way is the absence of strategic initiatives for the effective use of pastures for small producers will lead to a final reduction in the feed capacity of the pastures used. And the second way is small and large-scale use of the huge forage potential of the restored pastures.

Author: Zh. Issayeva
Year of release: 2022
Number of the journal: 4(88)

Constructive and Destructive Interference in Two Foreign Languages Learning
Annotation:

The topic of learning foreign languages is still urgent; moreover, it is getting more and more significant for a thriving number of teachers, methodologists and philologists. The main issue of these researches is that the results will provide the learners with the most effective and useful strategies and ways for acquiring a foreign language. The article gives the definition of the term interference and identifies its role in foreign languages learning. The key methods used in our article are analysis, synthesis, and comparative analysis. It studies constructive and destructive impact of interference in learning two foreign languages: English and German. There are the examples demonstrating positive and negative effects of one language on the other at the different language levels. The result of the research has both theoretical and practical value as it can be used to make up and implement the programs for learning foreign languages as well as to use them in practical classes.

Year of release:
Number of the journal:

Development of regulatory and technical documentation for the examination of equipment operating under pressure
Annotation:

Development of regulatory and technical documentation for the examination of equipment operating under pressure

Year of release: 2023
Number of the journal: 3(91)

On the application of CASE-methodologies at the stage of analysis and design of software tools
Annotation:

Main problem: the globalization of the information sphere has led to a significant increase in the volume of stored and processed information. To increase the processing speed and provide information to the recipient, it is logical to increase the power of the equipment on which the information is processed. But such a path also leads to an increase in financial costs for continuous modernization or complete updating of computer equipment and application software. Purpose: an alternative solution to increasing the capacity of hardware and software may be to optimize the process of organizing data storage, and already at the stage of information analysis. At the initial stages of the task, a huge amount of information is collected and processed, which needs to be classified, to identify essential and non-essential information flows for the information system being developed, etc. The quality of functioning of the developed information system as a whole and its individual modules in particular will depend on how correctly and fully the structuring and systematization of data will be carried out. Methods: modern methodologies of conceptual design of information systems shift the emphasis from software implementation to analysis and modeling of the production environment. The tools used in the process of conceptual modeling allow you to automate the main part of the processes, including the development of program code in the format of templates (patterns), including the preparation of documentation for the software product being developed. Since modern methodologies and tools are based on the use of powerful graphical tools, this significantly increases the visibility and simplifies the process of making adjustments to the information system project, actually using the "Drag-and-Drop" technology. This allows you to redistribute the time spent on the implementation of the first stages of information system development, allocating more time to the analysis and design of the software environment at an abstract, conceptual level. Results and their significance: the stages of analysis and design do not require large financial costs and are more variable. Information at these stages is easier to adjust and change than, for example, at the stage of writing program code. In addition, it is at these stages that the most active interaction between the developer and the customer is carried out, where maximum visibility and variability of the project of the future information system is required. And the use of modern software design methodologies significantly increases the efficiency of the first stages of information system design.

Author: I.I. Lyashenko
Year of release: 2023
Number of the journal: 3(91)

Hudromentoxycarbonylation of isobutylene by means of carbon monoxide and spirits in the presence of palladium phosphine complexes
Annotation:

The article is devoted to the study of the reaction of hydromentoxycarbonylation of isobutylene in the presence of palladium phosphine complexes in order to optimize the method of obtaining menthyl ether of isovaleric acid, which is the main component of the drug «Validol». The purpose of the article is to improve the methods of obtaining menthyl ether of isovaleric acid (the main active component of the drug "Validol") and to study the reaction of hudromentoxycarbonylation with l-menthol and carbon monoxide of isobutylene in the presence of homogeneous catalytic systems based on palladium phosphine complexes. The article presents studies on the content of validol from various types of raw materials by the method of GC analysis. In the commercial samples of validol obtained from natural l-menthol and industrial isovaleric acid (obtained as a result of the oxidation of "fermentation isoamyl alcohol"), there are 2 components (l-menthyl ether of l-menthol and isovaleric acid), additionally 2 % menthene hydrocarbon and 23 % L-menthyl ether of methyl ethylacetic acid. A probabilistic mechanism of the reaction of the hydromentoxycarbonylation of isobutylene with l-menthol and with carbon monoxide and in the presence of catalytic systems based on the studied palladium phosphine complexes is proposed.

Year of release: 2023
Number of the journal: 3(91)

Criminal Legal Characteristics of Subjects of Crimes Against Morality
Annotation:

The main problem is the relevance of the research topic. The history of the development of civilization shows that law and morality as components of the spiritual culture of society are organically linked to each other. The legal system of any state enshrines the moral requirements and moral principles that are vital for the whole society. When creating norms or improving them, the legislator must take into account the state of the public moral culture of the population so that the laws being developed are fair and perceived by members of society. Purpose: The purpose of the study is the further theoretical development of a set of criminal law issues related to determining the place of morality in the system of objects of criminal law protection, their role in the system of measures to combat crime, as well as the development on this basis of proposals and recommendations for improving criminal legislation regulating liability for attacks on public morality. Methods: Methodology and methodology of the study. The methodological basis of the study was made up of: generally recognized methods of scientific research of the phenomena of reality in their interrelation and interdependence both at the theoretical level (systemic, comparative legal, formal legal, historical methods of analysis, etc.) and at the empirical level (statistical analysis, questionnaires, research of documents, printed publications); the main provisions of the theory of criminal law, ethics, philosophy, psychology; rules of formal logic. The results and their significance: The stated circumstances, as well as the lack of elaboration and discussion of most of the provisions related to the modern legal regulation of crimes against public morality and their qualifications, determined the choice of the research topic. Crimes against morality are mostly committed intentionally. For example, involvement in prostitution, the organization of brothels for prostitution or maintenance, as well as other types of criminal acts directed against humanity (morality), are committed with direct intent. A person who organizes and maintains brothels for prostitution is aware that he is doing this for profit. Among the crimes committed against humanity (morality), animal abuse is committed mainly out of hooligan motives.

Author: S.T. Iksatova
Year of release: 2024
Number of the journal: 1(93)
Heading: Law