In the article it is grounded that a shadow economy is an inalienable element of the economic system based on the market. Traditional and new determinans of shadow economy formation are distinguished in the Customs Union countries appeared due to the reforms of the last decade. The factors of shadow economy are determined; their modern classification is given.

The article is devoted to the theoretical analysis M. Doychu species conflicts, conflict structure, developmental stages of the conflict, is also considered rigidity and its ability to influence various spheres of human activity. An analysis of the theoretical material concluded that the performance of the enterprise is important to good social and psychological climate and psychological safety of all participants in the activities of the enterprise.

The article is devoted to the theoretical analysis of the causes of deviant behavior in the formation and development of the individual student teenager in technical and vocational education, the authors offer recommendations for college’s psychologists. In this paper we study the causes of deviant behavior among adolescents identified the following socio -psychological factors stabilizing behavior: the role of the family, spiritual and moral traditions, the internal psychological state of a teenager, his attitude toward the world.

This article discusses the possibility and practice of Kazakhstani enterprises producing chemical products and raw materials, which are oriented to export regulations REACH, adopted by the European Union that will greatly increase the safety and competitiveness of domestic production.

This article discusses some of the problems of chemical safety, such as the recycling of waste production, chemical accidents and disasters, environmental pollution and the negative effect of the chemical industry on human health, as well as methods for safer handling of chemical products.

In this article it is considered different definitions to “maternity” concept as well as moral and psychological aspects of students training for maternity which mean human perception of the whole set of requirements, duties, social standards of behavior. This training is oriented to increasing of responsibility of students before family life, social prestige of maternity, psychological readiness of students for maternity, obtaining succinct knowledge. The level of psychological readiness for maternity is determined by the combined effect of positive and negative factors influence by the moment when a woman becomes a mother.

This article discusses the theoretical aspects of management foundations of marketing system of industrial enterprises of the Republic of Kazakhstan. As marketing planning is very important for industrial companies. Industrial and consumer market generally, supply exceeds demand, and therefore there is a struggle for every specific customer. With the growth in sales volumes, number of customers and markets from sellers there is a need to study their customers - who they are, their needs, buying behavior, motivation. Each seller tries by examining the consumer, to create a standard model (the rules of conduct of the seller), contributing to the sales.

In this article is considers the problem of development of skills in pupils to own difficult life situations in difficult circumstances of modern life. The author considers basic provisions of crisis situations and ways of behavior of pupils in them. The owning behavior of teenagers is considers as the purposeful public behavior allowing the subject to cope with problems (or stresses) by methods adequate to personal features and situations, through intelligent strategy of acts.

This article is devoted to the problem of deviant behavior of teenagers; it reveals the influence of external factors on the development of deviations of teenagers and offers to conduct the preventive work in a complex in early stages of development of deviant behavior. The factors and circumstances specifying the demonstration of deviation have revealed. The development of school policy aimed at the organizing the social and pedagogical conditions neutralizing and correcting negative impact of the social crisis has been suggested.

This article mainly deals with the role of healthy lifestyle in strengthening pupils` health. The relevance of the issue of healthy lifestyle modeling arises out of the fact that heath is one of the most significant life values of a person and a guarantee of his or her welfare longevity. Currently, due to the low life expectancy of people, it is crucial to foster the meaning of health as the main value in one`s life and importance and necessity of health preservation from the early childhood. Life preservation requires dedicated and persistent efforts from every person. Herewith, it is necessary to understand one fact: life preservation is a personal prerogative. If one is to always be healthy one must remember that it requires persistent, dedicated and considerable efforts. Therefore, it is crucial to have a long course of personal conduct that designates the general culture of our labour and rest management, rational combination of physical and mental workload, sensible nutrition, active leisure and good quality sleep, and, moreover, skills of safe conduct in different dangerous emergencies. All of it composes the system of healthy lifestyle.

The nature of a person reflects the history of relationships with the external environment. In the behavior lies the broad meaning of the concept. Accentuation of the nature is a strongly developed feeling in which the priorities and, in particular, the priorities of behavior are manifested. Accentuation is always a certain strengthening of signs, so it is a sign of personality accentuation. Nature formation is a lifelong process. Joint life forms of thoughts, feelings and modes of action. Therefore, along with the formation of a certain life-style image of a person, its " self", a quality that is determined by the appearance.

The article is concerned with the analysis of fires in the multi-storey residential houses in Pavlodar. The analysis was carried out on statistical data from 2014 to 2016. Examples of fire analysis in Russia are given.

The main directions of increasing the reliability and electrical safety of power distribution networks are considered in the article. The schemes of the main directions of development and improvement of electric grids are given.

In this article, the migration processes and their influence on socio-economic development of the Pavlodar region are considered. The concept of migrations, factors and types of migration are highlighted.. The demographic cases in the region are studied for research of migration processes and their influence on socialand- economic development of the Pavlodar region. Impact of migration on social-and-economic development of the country can be both positive and negative. The account of these factors is important for adjusting of migration processes and optimal policymaking in this sphere.

The article is devoted to the analysis of the concept of "smell" in Russian linguoculture. Each culture has its own specific smells, which are dominant for the bearers of a particular culture and become the identification marks of the ethnos, helping to convey the beauty and depth of the language. The article deals with phraseological units expressing the attitude of different cultures to smells, characterizing through the smell the personality of a person, its behavior, actions, age, state of health. The author of the article notes that smells have culturally relevant values.

In the article psychological features of protective behavior of preschool children are considered. Also, the theoretical basis for studying protective behavior as an intensive use of behavioral protective means for children is presented, which is part of the normative development process and is conditioned by a complex of socio-psychological, individual psychological characteristics of the child.

Тhe article deals with the functioning of the personality as a social unit in certain spheres of communication, corresponding to its age characteristics, natural needs, generally accepted norms, rules and social stereotypes of behavior.

The article presents new tools for managing labour safety to conduct behavioral safety audits, transforming meetings and labor protection councils into cascade committees, to implement technical and safety standards, and to use new assessment and motivation system and methods of internal incidents investigation.

The work analyzes the emergency situations that occurred on the territory of the Pavlodar region. The main causes of emergencies of natural and man-made nature are presented. The article contains the results of the analysis of the effectiveness of management in a safety-related system in the Pavlodar region and recommendations for improving the safety-related system during the emergency relief operations.

The analysis of the current management system of labor protection at «Aluminum of Kazakhstan» JSC is provided. Services and departments providing production activities are presented. The basic principles of the management system of labor protectionare considered. The organization of work on labor protection and development of corrective and preventive actions are presented.

This article considers chemical safety as a system of measures aimed at protecting vital human interests against adverse chemical effect from threats of processing, storing and destroying hazardous chemicals. Chemical safety is ensured by a complex of legal, organizational, financial, material and informational measures intended for prevention and elimination of real and potential security risk, mitigation of their consequences.

The article is devoted to the current problem of quality control and safety of dairy products. The article provides a generalized description of the system models, discusses the main problems and advantages in implementing the quality control system in small and medium-sized dairy enterprises.

The article is devoted to risk analysis, methods of ensuring dairy products safety. Furthermore, the author dwells on such tool of quality control as a decision tree. The article presents the plan of HACCP for a diary enterprise on an example of the production a sour cream with 15-20 % of fat content.

Аt present, dairy enterprises use a system for analyzing and monitoring critical control points, as well as a quality management system, to produce high-quality and safe products. These systems take into account factors that may affect the production process and other components by identifying hazards from the procurement of raw materials to the consumption of products for food. The purpose of the article is to study the role and necessity of applying quality and safety management systems at dairy enterprises and reducing the risk at all levels of production

The article describes the relationship of man as a species with nature. It is shown that this relationship is determined by the conditions of existence, the quality of air and water, the necessary elements of nutrition. It is also pointed to the role of environmental conditions-optimal for the body, determining human health and life expectancy

The article describes the results of the analysis of the state of working conditions at the enterprise and at the site of JSC «Алюминий Казахстан». Deficiencies in the OSH management system have been identified. Measures are proposed to improve working conditions and prevent industrial injuries. These measures will help ensure safe working conditions in the workplace and reduce the risk of occupational diseases

In the work measures on preparation of production personnel for actions in the conditions of emergency situations are considered on the example of Neftekhim LTD LLP. The structure of the control system and its main components were studied, the regulatory legal framework used in industrial safety was described. The possible risks and dangers, as well as harmful substances used in the production of plant products and their effect on the body were studied; the current state of the control system in the field of emergency prevention was evaluated

During the preparatory activities for the preparation and conduct of the KShU, the civil defense plans for peace and wartime were adjusted and clarified, the calculations of forces and resources for conducting emergency response activities were refined and their readiness checked. Checked the combat readiness of the units taking into account work in extreme conditions and the provision of personnel with equipped interchangeable clothing. Additional briefings have been organized on compliance with safety measures for fighting fires and performing emergency rescue operations. Autonomous sources of energy supply, stocks of material and technical, food reserves were checked. In general, the forces and facilities of the units of the Service are on daily round-the-clock alert duty and are ready to meet the set tasks for eliminating emergencies and situations at the first alert.

The article is devoted to the task of automating the assessment of the electrical safety level of electrical installations based on the determination of the electrical resistivity of soil layers ρ in specific climatic conditions. The soil ρ value depends on many factors, which can vary significantly during the year. Therefore, the decision was made using modeling based on one of the areas of artificial intelligence: fuzzy logic.

The article describes the results of a study of the effectiveness of the standards being implemented in railway transport. A general view of efficiency and standardization was analyzed. It was studied which document regulates the application of standardization in the Republic of Kazakhstan. Further, the international railway standard IRIS «International Railway Industry Standard» was taken as a basis, which, in turn, is based on the international standard ISO 9001. A study of the methods and types of effectiveness of standards was carried out, as well as an analysis of the applied international standard in the field of railway transport IRIS. The purpose of this standard is to create a business management system that allows for continual improvement, with an emphasis on preventing and reducing delivery defects. It is important to note that the effectiveness of standardization is evidenced by examples showing that ignoring standards turns out to be huge losses for a company for a number of reasons, for example, because its products have not been certified for compliance with a specific standard; due to the additional costs of the company for reworking products that are not manufactured in accordance with the requirements of the standards in the country of export. An analysis of the effectiveness of standardization work in the railway industry can be expressed in relative terms of the effects obtained as a result of the application of the standard: for example, in an increase in the level of safety or in economic growth. The basis for determining the actual effect is the actual level of production that existed at the given enterprise before the introduction of the standard. The measures that can be applied in order to increase the efficiency of solving the problems of developing standardization in the field of railway transport have been studied. Such standardization as one of the elements of technical regulation can provide a contribution to economic growth in excess of the corresponding indicators from the introduction of patents and licenses.

The article is devoted to the mathematical modulation of a complex of experimental data obtained in the process of experimental studies of processed cheese products, processed by mathematical methods. The purpose of this study is to establish the type and amount of the melting salt that promotes the formation of the plastic structure of the processed cheese product. The analysis of scientific research in the field of food technologies showed that mathematical modeling is used in the following areas: clarification of the modes of technological processes, design of recipes and assessment of the quality of finished products, as well as forecasting the shelf life of new products when they are put into production. The most relevant in describing the processes of food production are models of multivariate variance-regression analysis using methods of mathematical planning of the experiment. The authors carried out mathematical modeling and established graphical dependencies characterizing the degree of influence of the regulated factors X1 and X2 on the controlled ones that determine the quality and safety of processed cheese products. It is important that the mathematical analysis of the graphical dependences of the rheological parameters on the adjustable factors indicates the reliability of the data obtained. It is concluded that an increase in the melting salt dose leads to an increase in the – limit shear stress, which reflects the nature and state of the consistency of the processed cheese product. The process of normalization of the controlled factors by the maximum value was carried out. Graphical dependencies were built and regression analysis was performed, the results of which allow an objective assessment of the degree of influence of the type and dose of the melting salt on the chemical and organoleptic characteristics of the test products. The authors have proven that the optimal efficiency of transforming the structure of the constituent components of the recipe into a plastic structure of a processed cheese product that is stable during storage is provided by a combination of adjustable factors X1 (Solva 85) and X2 (Solva 120) taken in a ratio of 1: 1, with a total amount of 1,2 mas.%. At the same time, the quality indicators of the experimental products are characterized by the following values of the controlled factors: У1 – 1280 Pa; У2 – 9 points, У3 – 9,301 (2,0-2,2109 colony forming units /g).

The COVID-19 coronavirus pandemic has brought about a new economic reality, to which every economic entity must adapt, regardless of the scale: within a region, a country, or the whole world. The article examines the regional economic mechanism in the context of the pandemic in the context of the interaction of the market mechanism of self-development and the control influence of the regional authorities. The destabilization of the economic situation in the regions as a result of the pandemic and related restrictions poses the problem of revising the main directions of regional policy To achieve the set goals and objectives, the general methods of empirical and theoretical research were used: analysis, synthesis, induction, deduction, generalization, description. Three spheres play a key role in the economy of Pavlodar region: industry, trade and transport. Just how to remain positive dynamics in terms of industrial production and maintained the services will depend on the development of the region, the main indicators which are discussed in this article through the prism of the events in the context of the pandemic. The necessary health measures taken in response to the pandemic have led to a severe reduction in mobility and are accompanied by high economic costs. The quarantine measures have had a direct impact on businesses, especially microbusinesses. To support this sector, tax incentives were provided, lending was expanded, and measures were taken to further facilitate the business environment. The article reflects only a small list of issues that required changes in the economic mechanism in the context of the pandemic and the introduction of restrictive measures, as well as the strengthening of the influence of external control on the economy. At the same time, the state as whole and individual regions, taking into account their potential and the actual situation in the economy, need to find an optimal balance between the prohibitions and restrictions imposed to ensure the safety of human health and the preservation of the economy in a functional mode, work and income of employees. This problem of finding a balance between prohibitive and permissive measures requires further analysis. At the same time, the state needs to develop and apply tools of a systematic nature, focused on the long term.

The progress of work on the creation of an "intelligent transport system" in Kazakhstan, the development and modernization of the road industry will be reported. The economic and social effectiveness of several transport corridors and new projects were analyzed. Transport corridors of foreign countries, methods of providing logistics services were presented. In his address, the head of state paid special attention to the issues of digitalization of all spheres of life of the population, including the transport sector of Kazakhstan. Currently, the Ministry of investment and development of the Republic of Kazakhstan is working on the creation of an "intelligent transport system" within the framework of the state program «Digital Kazakhstan» (ITS). ITS goal is to systematically integrate transport infrastructure, transport devices and users with modern information and communication technologies aimed at improving the safety and efficiency of the transport process. The concept will include 11 components in ITS. One of them is a special automated measuring instruments (UAVs), which are installed in the main automobile corridors. This device is designed to measure moving vehicles without contact and eliminate unjustified stops. This year, it is planned to put into operation 10 units of RSPP, and by 2020 it is planned to increase their number to 46 units. It is also planned to introduce a traffic management system that will inform drivers about the situation on the roads, a system for forecasting and analyzing climatic conditions, which is carried out through a network of weather stations along the roads, a network of video monitoring and special video cameras for detecting traffic violations, toll road systems that cover the cost of maintenance of the national road network, etc. They will be introduced in stages until 2021. The implementation of this project will reduce road deaths, increase the volume of transit traffic and the speed of logistics services, fully cover the main highways with measuring instruments and create favorable conditions for drivers on the roads. Such systems are already operating in South Korea, Japan, Australia, Europe and the United States.

In modern conditions, many companies highlight such a problematic aspect in the management of the talent pool as the formation of leadership potential among employees, which undoubtedly affects the achievement of strategic goals and the efficiency of the enterprise as a whole. In modern economic conditions, the role of a leader in implementing the company's development strategy is very important. The important competencies of a leader today include responsibility, the ability to be responsible for one's obligations, initiative and creativity, a proactive approach to life, sociability and purposefulness. When a leader is a leader, he or she is assessed according to such criteria as personal qualities, values, personal effectiveness, creative thinking, and professional skills. These core competencies need to be developed internally. Moreover, if a company is determined to nurture its leaders, it must clearly build a policy of forming a personnel reserve, a pool of future leaders. This is a key aspect in the activities of leading companies. Purpose is defining the role of leadership potential to create a strong corporate culture and form effective teamwork. The formation of a talent pool is associated with the presence of a strong leader, and with the fact that the company's management maintains established traditions, and shows constant concern for customers, employees and other business participants. The corporate culture must correspond to the development strategy, and the success of the strategy implementation depends on how effective the manager will be, leading the strategy implementation, what are his leadership qualities. It is important to show how high and important is the role of the leader, his or her active participation in the formation of the personnel reserve. The method of analogies and such management approaches as personal, behavioral, process and situational were used in the work. Understanding and supporting the work to build a strong talent pool can help businesses become more resilient in the marketplace, improve production and management performance, and see themselves in the long term.

Main problem: It is well known that the development of language in society, the development of speech, the formation of personality largely depends on the interaction of people. Therefore, they develop depending on the specifics of each nation and are one of the values that people have accumulated over the centuries. Comparison of human behavior with nature in English and Kazakh languages describes the spiritual life of each nation. It defines the national feelings, national behavior, national customs and traditions. Purpose: Comparative analysis of the values of the Kazakh and English peoples occupies a special place in the culture and language, the essence and content of which are indelible. This is a fount of cultural and historical life of the people, the spiritual value of the nation, such qualities as prudence and kindness. Methods: This article describes the ethnolinguistic foundations for comparing human character and nature in English and Kazakh. In cultural linguistics and cognitive linguistics, the concept of behavior is studied as an image of the world formed in the consciousness of an ethnic group. Based on the definition of the concept of behavior, the authors describe the manifestations of behavior in the national consciousness, the system of national thinking, beliefs, attitudes. It is noted that the formation of the behavior of unrelated Kazakhs and Englishmen depends on their geographic environment, nomadic lifestyle and behavior. Results and their significance: The phraseological units of the two languages used in this study clearly to show the characteristics of each nation. It is shown that forecasting natural phenomena for both peoples is closely related to their life, economy, occupation and plays an important role in people's lives.

Fruits and vegetables are most often consumed without being thoroughly processed before consumption. Some plant foods are vacuum-packed to ensure long shelf life as well as preserving the quality and safety of the product. Fruits and vegetables carry naturally occurring non-pathogenic epiphytic microflora on their surfaces. During growth, harvesting, transport and further handling they can be repeatedly contaminated by pathogens from human or animal sources. Fresh fruit crops have been implicated in a number of documented foodborne disease outbreaks. Outbreaks of diseases caused by bacteria, viruses and parasites have been epidemiologically linked to the consumption of a wide range of fruits and vegetables. The aim of our study is to assess the risk of contamination in fruit and berry crops and how to address this long-standing problem, namely, contamination of fruit and vegetables with unnatural pathogenic microflora. The following fruit and berry crops common in Turkestan region were chosen for the experiment: Apple variety Suislepskoe (stolovka) , peach variety Nectarine and grape variety Kishmish. Bacteriological inoculation was carried out by membrane filtration of used sterile water to obtain flushes from the surface of fruit crops. All work was carried out under full aseptic conditions. The utensils, water and other equipment used in the work were sterilised in advance. The data obtained during the experiment shows that there is a potential for widespread contamination of uncharacteristic microflora of plant products. Based on the results of the study it can be concluded that there are yeasts and acetic acid bacteria on the surface of all three samples of fruit and berry crops, which can be universally contaminated food and are not the natural microflora for the above mentioned crops. Specifically, fruits and vegetables can be contaminated with various bacterial pathogens, including Salmonella, Shigella, E. Coli O157:H7, Listeria monocytogenes and Campylobacter.

Currently, close attention is paid to industrial safety at hazardous production facilities. Compliance with industrial safety requirements is directly related to the risks of accidents that can lead to man-made disasters, negatively affect the health and life of the population. As in any other industry, there are problems in ensuring industrial safety. There are several reasons for this: the backlog of standards from scientific and technological progress, the exclusive competence of state authorized bodies, and the lack of a risk-based approach. After the collapse of the USSR, the requirements of industrial safety in the Republic of Kazakhstan have practically not changed: laws and statutory instruments (hereinafter-the LSI) are approved and put into effect, after which they are constantly changed and supplemented; the presence of national and international standards, which, in fact, are revised on the basis of the USSR standards, taking into account the influence of the realities of the time. It can be concluded that the current standards are not focused on the future, scientific and technological progress, innovation, so they are constantly undergoing changes, thereby adapting to the necessary requirements that dictate modernity. State regulation does not contribute to the effective development of industrial safety. This is due to the fact that the state performs exclusively supervisory functions (thus it is exclusively educational in nature), and there is no dialogue between authorized state bodies, expert organizations, scientific organizations, and testing laboratories. If we consider the experience of the Russian Federation in the field of industrial safety, then it makes no sense to accept even some experience, since: similar to the Kazakhstan’ LSI and regulatory and technical documentation (and their constant dynamics), the development of cooperation with the Russian Federation within the framework of the Eurasian Economic Union. Accordingly, it is advisable to consider the experience in the field of industrial safety in Europe and the United States of America because of the effectiveness of regulation and supervision than in the Republic of Kazakhstan and the Russian Federation. This article provides information about international experience in the field of industrial safety in the United States and the European Union. The tasks of state regulation in the field of industrial safety in the Republic of Kazakhstan, the Russian Federation, the United States, and the European Union are described in detail. The analysis of normative-legal acts and normative-technical documentation is carried out. Based on the analysis of international experience, solutions to problems in the field of industrial safety for the Republic of Kazakhstan are essentially presented. The purpose of this article is to reveal the problem in the field of industrial safety in the Republic of Kazakhstan and international experience that the Republic of Kazakhstan can borrow in order to effectively ensure industrial safety. Study of international experience (USA, EU countries, Russia) in the field of industrial safety in terms of: analysis of standards; regulation (control and supervisory functions) to ensure safety. The results of this article will reflect the problems that hinder the effective provision of industrial safety in the Republic of Kazakhstan and essentially suggest ways to solve them.

Currently, the problems of environmental safety are facing society. The industry develops every year. In this critical economic situation, the oil industry is a stimulant for the economic sector in Azerbaijan. The level of development of this industry is also relevant due to other reasons: sociological, technological and features of the economy of Azerbaijan. The production activity of oil processing, concentrating harmful substances and energy, is a source of man-made danger and pollution of the natural environment. The risk management process mainly consists of three stages - risk safety analysis, risk assessment, which is carried out in comparison of calculated and actual risk levels, the so-called acceptable risk levels and the adoption of appropriate regulations and management decisions. One of the factors that should be taken into account when assessing risk and safety is to determine the necessary costs. Since these costs are paid directly to the company, they try to minimize them as much as possible, which reduce the accuracy of risk assessment. One of the objectives of the study is to determine the optimal value of the necessary costs. It is established that the less reliable the method, the lower is the cost of its implementation. The methodological basis of the work was scientific works on these problems of scientists-economists, mathematicians on safety and risk assessment at industrial enterprises. When developing the presented methodology, computational algorithms developed by Dow Chemical were used. This company has collected a large volume of material on accident statistics, taking into account damages. Based on the obtained and experimentally verified data, a system of indices has been developed, an assessment of various indicators for qualitative and quantitative risk assessment of oil refineries. The analysis of the technogenic danger of oil refineries makes it possible to determine ecological and economic losses and choose rational possibilities of acceptable risk. The required costs, depending on the level of risk, are determined based on an increase in the accuracy of calculating the probability of occurrence of the cause of risks. The article examines the relationship between the expected level of risk and economic losses during oil refining in separate technological units, which allow determining the required level of risk and the expected economic damage.

The variety of species and forms of parasites of agricultural animals and the features of their life cycles are the basic foundation for the production of different types and medical forms of antiparasite medicine. In the treatment of the parasitic diseases of agricultural animals, one of the main factors is that the veterinary doctors have the knowledge on the mechanics, efficiency and the safety for humans and environment of the medicine being used. Taking into account high pathogenicity and resistance of parasitic organisms and their ability to adapt to effect of medicine, it is crucial to permanently monitor the efficiency of the applied anthelmintic drugs, including the new drugs offered by veterinary services. This article will describe the results of the research on pharmacodynamic and pharmacokinetic parameters of «Ivermectinum», «Ivermec», «Aversect-1», «Аvrsect-2», «Аivin» drugs and their methods of application with the consideration of terms of maintenance and immune status of cattle herds in Mayconyr village (Irtysh district, Pavlodar region). A comparative analysis of efficiency of the above mentioned drugs in dehelmintization and treatment of cattle was conducted with the results provided. The recommendations and the restrictions on use of the drugs were determined considering the farm condition. The experimental research of the aforementioned broad-spectrum drugs was conducted strictly following the rules of asepsis and instructions on application. The total number of replacement heifers subjected to the dehelmintization under the method of analogues is 150 units. Anthelmintic treatment was conducted two times a year - in springtime (March-April) before pasturage, and fall time (September-October) before confining the cattle in the stable. Coprological study on intestinal helminthes of the examined cattle was conducted in Irtysh RVL of the Pavlodar regional branch of RVE RVL VCaSC MA RK by ovoscopical, flotation and larvoscopical methods. There is a comparative analysis on the efficiency of avermectin group antiparasitic drugs applied twice a year for cattle dehelmintization. The recommendations on the use of the aforementioned drugs for dehelmentization and prevention of parasitic diseases are provided and the requirements for the use were determined.

Main problem: The key task of the development of the regions of the Republic of Kazakhstan is to ensure their sustainable socio-economic development by increasing its competitiveness and innovation activity. To develop a successful strategy, as well as for its subsequent successful implementation, it is necessary to have a clear vision and idea of what the region will be like in the near future. This vision should be clearly formulated and understood by all interested parties in order to properly coordinate efforts in achieving the set goals. In turn, based on the vision, various initiatives and activities are being formed, the implementation of which is aimed at implementing the main directions of sustainable development of the region. Purpose: to consider the main directions of the implementation of the strategy of competitive, sustainable and safe development of the region. Methods: The theoretical and methodological basis was the concepts, hypotheses and theories presented in the works of domestic and foreign researchers. The methodology is based on a systematic approach, within which methods of comparative, factorial, subject-object; structural-functional, statistical analysis and extrapolation have been applied. Results and their significance: In order to ensure the sustainable development of the Pavlodar region in the future, there is a need to form the basis for the creation of new sectors, as well as to consider opportunities to diversify the regional economy. Currently, there is a structural change in jobs, which leads to an increased role of professional services industries in the field of information technology, engineering. It should be noted that the level of development of small, medium-sized businesses and entrepreneurship in the region is at a low level, due to the predominance of resource sectors in the economy. These sectors, due to the peculiarities of the technological process, do not form a system of suppliers around themselves. However, in order to ensure the progressive development of the industrial complex in the region, it is important to create conditions for the development of SMEs in the region and, accordingly, a system of suppliers around leading manufacturing enterprises. The high competitiveness of the Pavlodar region in the future until 2030 will be ensured through the development of priority clusters, as well as through the emergence of new industrial sectors of the economy. Thus, the priority clusters of «today» include: metallurgical cluster, including the production of end products; cluster of railway engineering; agro-food cluster.

An analysis of the mechanical, chemical and pyrogenic impact of the Baikonur Cosmodrome on the environment showed the presence of man-made impacts of the first stages (FS) used on the ecosystems of the impact zones (IZ). This article presents the concept of a controlled landing of spent launch vehicles with liquid rocket engines (LRE) in the expected zones of damage to the ecosystems of the area while maintaining the energy-optimal launch scenario of the launch vehicle. Purpose of the article - development of effective technologies for reducing the anthropogenic impact during launches of promising rockets from the Baikonur Cosmodrome based on theoretical and experimental studies of innovative technologies: reducing the area of impact of parts from launch vehicles; fire and explosion safety, no danger of rocket launchers; controlled descent of used first stages; To solve the problem, it is proposed to create an additional IASM, which will be included in the environmental management system of the Baikonur Cosmodrome. Possible design solutions are proposed based on the evaporation of untreated liquid waste from the tanks of separated parts, their fire and explosion safety, and the use of the obtained vapor-gas mixtures for controlled unloading of separated parts while moving along the landing trajectory to the optimal area. The authors of the article have developed evaluation criteria that characterize the main environmental indicators of the studied areas: fire hazard, soil cover and impact on vegetation are studied for inclusion in the IASM. There are objective requirements and basic rules for the creation of HIASM, which is an integral part of the environmental management system of the cosmodrome.

As part of solving the priority tasks set in the Address of the President of the Republic of Kazakhstan Kassym-Jomart Tokayev, a significant role is given to the development of the food industry, including dairy products. Big tasks are to be solved by branch science in the field of processing raw materials of plant and animal origin using the achievements of bio- and nanotechnologies to improve the quality, biological, nutritional value and food safety. New approaches are needed to organize the complex processing of plant and animal raw materials in order to improve the economic, social and environmental aspects of the production itself, as well as the life of the population of the Republic of Kazakhstan. Despite the extensive range of processed cheeses, it is constantly updated. This is due to the need to meet the requirements of nutritional science, changing consumer demand, as well as the availability of raw materials and considerations of the profitability of a particular type of cheese. The working hypothesis of the research was the assumption that for the melting of raw materials it is possible to use reagents that affect the active acidity of the medium, stabilize the structure, bind moisture and improve the consistency and organoleptic characteristics of the finished product. The article is devoted to the issue of the process of melting rennet cheeses. The purpose of the article is to show that the melting process is closely related to different forms of raw material protein micelles. In this article, the influence of the type and amount of melting salt on the formation of the structure of processed cheese is considered, the rheological indicators of experimental products are determined in accordance with the scoring of processed cheeses. The indicator of water activity (аw) was established, the microbiological parameters of the experimental products were determined.

The production of vaccine preparations before release requires standardization of their immunobiological parameters, especially safety and immunogenic efficacy. An indicator of the immunogenic effectiveness of the lumpy skin disease vaccine is the resistance of vaccinated cattle against the virulent virus. However, according to preliminary studies, the virulent control virus did not always cause clinical disease with characteristic symptoms when infected subcutaneously. The purpose is to develop a biological model in the form of a complex consisting of a pathogenic virus, a method of infection and a susceptible animal to assess the immunogenicity of a lumpy skin disease vaccine. Local cattle, intact from lumpy dermatitis, were used to reproduce lumpy dermatitis and develop the causative agent of the disease. As the initial infectious virus, we used a 20 % tissue suspension of nodules (skin nodules) obtained from cattle that fell ill with lumpy dermatitis in the field in the Atyrau region in 2016. As a viral mass to control immunogenicity, a 20 % suspension of skin nodules and edematous skin tissue at the site of the pathogen injection, obtained after the “refreshment” of the virus in animals, were used. The disease was reproduced by infection with the test suspension of the virus intradermally, subcutaneously, intravenously at a dose of 0.5 cm3 and titration on the skin of the animal. The effectiveness of the biological model was assessed by morbidity, severity of the course and severity of the manifestation of the disease. During primary intradermal infection with a field isolate of the virus, the disease manifested itself in one of three animals in the form of hyperthermia, depression, lacrimation, and the appearance of several nodular nodules in the skin of animals. The refreshed tissue virus caused clinical disease both in subcutaneous, intradermal and intravenous infection. But the clinical signs of the disease were more pronounced with intradermal inoculation of the virus, and with intravenous inoculation, it manifested itself in a more severe form with a fatal outcome. Inoculation of the virus intradermally into different areas of the skin led to the development of an independent skin lesion in each infected point in the form of painful edema, followed by necrosis, the size and intensity of which depended on the dose of the injected virus. This development of skin pathology made it possible to work out a method for determining the virus titer in vivo. The tissue virus obtained from the edematous tissue at the site of the pathogen injection was guaranteed to cause clinical disease in cattle during intradermal inoculation and made it possible to evaluate the immunogenic efficacy of the produced batches of vaccine against lumpy dermatitis.

In this article, the need to improve professional communication defines the tasks of improving the psychological and pedagogical qualifications of teachers of primary, secondary and higher education, their professional competence as an increase in interaction in the field of modern achievements in pedagogy, psychology, acmeology. In this regard, it is said about the more efficient use of modern private resources to build effective strategies for professional communication of teachers. The idea is revealed that acmeological design is used for individual work related to the strategy of life, the improvement of professional behavior or communication. It is proved that communication helps to plan and organize joint work; the goals of communication expand to gaining knowledge about the world, training and education, coordinating actions in joint activities, establishing personal and business relationships.

Language is the main vector of communication, in turn, communication develops languages throughout the history of mankind. The natural need of people is communication in their native language, the most convenient means of self-expression and understanding of others. However, modernity has changed the global paradigm of communication, indicating a reassessment of the role of languages by both official and informal communities, including native speakers of various languages. Moreover, the choice of a common communication language is influenced not only by the context, but also by the social, cultural, and economic characteristics of the communicants. In an intercultural context, there is a problem of adaptation of communication participants, closely related to the mastery of the language of the receiving party, ignorance of which is a barrier to successful communication. To develop the skills of tolerant communicative behavior, it is necessary to create special programs equipped with the necessary teaching materials available in international communication languages. Some of these workshops are offered in the presented article. Purpose of the article is to determine the influence of language on the development of economic processes that unite people of different linguistic and socio-cultural backgrounds, as well as to describe the influence of interacting languages on various aspects of professional activity and the role of education in introducing new generations into an intercultural context. To achieve the purpose, the following tasks were put forward: presentation of the main provisions of the economic theory of language; highlighting the controversial role of translators when working with companies in an intercultural environment; identification of problems and the role of teaching foreign languages to students for their successful adaptation in an intercultural professional context. The theoretical and methodological basis was the concepts, hypotheses and theories presented in the works of domestic and foreign researchers. The methodology is based on a systematic approach, in which methods of comparative, structural-functional, and statistical analysis were applied. To obtain empirical data, the methods of questioning and interviewing respondents included in the system of intercultural communication were used. Based on the results obtained, it can be said that, as a rule, in most cases, preference is given to the common language of communication, which is either one of the international languages or the language of the titular nation. Ethnic ties, trust and tolerance are often associated with the possession of a common language of communication.

The process of creating new forms is the key to choosing the combination of different textures for a unique aesthetic effect. Currently, various elements of the interior, including furniture and other decorative additions, are the basis for obtaining emotional balance, which is achieved between the functional purpose of the interior and its artistic and figurative concept. The main task in creating such objects is to create the most comfortable and harmonious atmosphere in the interior, regulating the mental processes of a person, which would cause exceptionally positive emotions and stimulate the creative development of users. The purpose is to consider the features of the use of epoxy resin in the design of interior objects and to study the importance of synthetic resins as a modern material for new ways of shaping in interior design and decoration. The methods used are: the use of formaldehyde resins as a modern, affordable, multifunctional material, the combination of resin with coloring and the use of various textures. Expansion of the range of interior elements in the manufacture of which epoxy resin is used. In this regard, it should be noted that the use of various resin compositions when creating design objects meets consumer requirements and complies with modern and latest trends. In this article, a brief study of such a polymeric material as epoxy resin was carried out. The properties of epoxy resin and how they affect the compositional solution, methods of its modification, and functional aspects of design from the point of view of manufacturing interior elements are described. The technologies for manufacturing modern products for decorative and applied purposes coated with epoxy resin are considered. In the process of researching technologies, a series of experiments are carried out to determine the structure of possible sequential actions, within which a technology will be studied and designed to ensure the safety of a new design product made of synthetic materials, then a constructive logic will be provided in which not only the functional properties of the object will not suffer, but also acquire valuable innovative value

In the dairy market of Kazakhstan, the demand for mass-produced dairy products is decreasing and expanding to innovative fermented milk products for functional nutrition. The main feature of the new technology is multicomponent formulations, which include the main raw materials and biocorrectors, ensuring their high biological and nutritional value. New dessert products are prepared on a dairy or protein basis using vegetable ingredients, fermented with strains of dry starter cultures of direct application or immobilized starter culture Bifimm probio. The purpose is to apply immobilized living cells of pure cultures of lacto- and bifidobacteria as a biocatalyst for the fermentation of dairy-vegetable media. During the study, the method of immobilization of microbial cells in biopolymer gels was used. The most effective method is the inclusion of cells in an aqueous solution of biopolymers with a concentration of 25 %. For immobilization, pure cultures of lactic acid and bifidobacteria were selected in the gel as part of the concentrates "BK-Altai-LS Bifi", "Poleznaya Partiya", "Genesis", "Narine", "Bio-yogurt Vivo", and the main prescription ingredients were selected: milk with a mass fraction of fat of 1 %, 2.5 %, 3.2 %, natural grain additives, jams, juices, nuts. Formulations, technological schemes and production methods, prototypes were developed, quality and safety indicators were determined. Studies have shown the effectiveness of immobilized starter cultures in the formation of fermented dessert products. Out of 20 prototypes with the best indicators, 5 samples were selected, in which the optimal ratio of milk, probio Bifimm starter cultures and biocorrectors averaged 70:20:10. The quality and safety analysis showed that new fermented milk products using immobilized starter cultures have a positive effect of more than -70 % compared to direct-use starter cultures, have functional properties and can be used for healthy nutrition in Kazakhstan.

In recent years, the Republic of Kazakhstan has maintained an ambiguous criminal situation, and there is an increase in certain types of crimes, against the background of the overall positive dynamics of decline. Special attention of criminologists has recently been attracted to the study of crimes in the family and household sphere, and crimes committed in the sphere of religious and spiritual relations, since both of these types are showing increasing prevalence. Therefore, considering such an important institution as a «voluntary refusal», it would be advisable to consider them from the perspective of the offenses we have named, especially since countering them is one of the main directions of state criminal policy. In general, the study of the institution of voluntary refusal to commit an offense is based not only on coercive measures, but also on incentive measures, which means the opportunity to correct the behavior of the offender until the end of the illegal act. The purpose of this scientific article is to study the features of voluntary refusal to commit a criminal offense in crimes committed in the sphere of religious, spiritual and family-household relations, taking into account practice and making recommendations for improving regulations of a criminal nature. The leading methodological tools of the scientific article are dialectical, phenomenological, synergetic and systematic approaches of scientific cognition. Before proceeding to the analysis of the concept of voluntary refusal, it should be noted that the norms about it are far from perfect. There is no unambiguous understanding of the signs of voluntary refusal among scientists, which complicates law enforcement practice. One of the most important tasks of any scientific research is the development of scientific concepts. The consolidation of such concepts in legislation is an effective way to establish a uniform understanding of the norms, a clear idea of their content and, as a result, an increase in the effectiveness of the impact of criminal law in the process of legal regulation. However, these concepts themselves do not reflect reality like contemplation or representation, they are closer to the essence of the phenomenon. The article concludes that the essential features of the concept itself somewhat narrow the objective reality. But, at the same time, the correct identification of the main features in the concept is an important task of scientific research.

The article contains the results of a research work devoted to an important problem - the development, production and delivery to the consumer of fermented dairy products of a healthy diet fortified (enriched) with milk protein, a vitamin-mineral complex, and probiotics and prebiotics. Purpose is based on mathematical modeling of experimental data, to determine an effective fermented food system for use as the basis of a fortified (enriched) curd product for a healthy specialized diet; to develop a recipe and technology for its production; to study the nutritional, biological and energy value of a new product. Modern technologies and equipment were used in experimental studies: ultrafiltration, fortification, etc. The studies were carried out by standard physicochemical, microbiological methods in three to five repetitions. Mathematical and statistical processing of experimental data was carried out using the program "Statistica-6.0". A recipe and technology for the production of a curd product for a healthy specialized diet has been developed. Its nutritional, biological and energy value has been studied. The developed recipe and biotechnological parameters for the production of the curd product were tested in the industrial conditions of the leading enterprise JSC "Lyubinskiy MKK". The quality and safety of the curd product was studied in the laboratory of techno-chemical control of FGANU "VNIMI" (Moscow).

The article highlights the problem of coping behavior of students in stressful situations of the educational process. Purpose of the article - determination of the dominant productive and non-productive strategies of coping behavior among undergraduate students. While doing research the following methods were used: Coping with Stress Questionnaire (COPE) by K. Carver, M. Scheier and J. Weintraub, adapted by E.I. Rasskazova, T.O. Gordeeva and E.N. Aspen. Fourth-year students show significant variability in the choice of methods of coping behavior. This means they have a wider range of coping strategies. At the same time, first-year students do not have a diverse enough range of coping strategies. This may be due to their less experience and unfamiliarity with various coping techniques. Significant differences were found in the activity of using the effective strategy “Finding a solution to a problem” among students at different stages of training. This suggests that fourth-year students are more prone to problem-oriented coping, while first-year students prefer emotionally oriented coping with exam stress. As a result of the study, it was determined that the most common methods of coping behavior among students are the strategies “Accepting responsibility” and “Planning a solution to the problem.” This means that most students prefer active and mindful approaches to coping with difficulties. It has been proven that the relationship between methods of coping behavior and anxiety of students is different in all courses of study. This may be due to varying levels of experience, degree of curriculum difficulty, and other factors that influence perception and coping with stressful situations. These results highlight the importance of developing a variety of coping strategies in first-year students, as well as the need to support and train fourth-year students in using effective coping strategies.

The article is devoted to the development of technological parameters for the production of gluten-free pasta, as well as to the study of the influence of physico-chemical factors on the formation of the structure and organoleptic parameters of gluten-free pasta. The authors studied modern approaches to the production of gluten-free food in Kazakhstan. During the study, the main types of raw materials used in the production of gluten-free pasta of functional orientation were identified. For the production of a new product, a reasonable choice of raw materials and functional ingredients was carried out, the formulation and production technology were developed, all temperature and time modes were described, physico-chemical, organoleptic parameters of the new product were studied, a production flowchart was developed. The purpose of the article is to develop the technology of gluten-free pasta enriched on the basis of corn, rice flour and meeting the requirements for specialized food products, with the addition of functional and flavoring ingredients to expand the range of gluten-free products in the Republic of Kazakhstan. In experimental studies, the formula of a new gluten-free paste based on rice and corn flour with the addition of flaxseed flour, soy protein isolate «EdimCo», xanthan gum, dietary fiber (psyllium), Supermak booster was developed. The complex results of organoleptic and physico-chemical parameters of whole-grain flour for the production of new gluten-free pasta are presented. The results of organoleptic and physico-chemical indicators, as well as safety indicators of finished gluten-free pasta are presented. The article presents the technological parameters and time modes of the production process of fresh pasta, including the following basic operations: preparation of raw materials at t = 10 0C, kneading pasta dough at t = 40-45 0C, vacuuming at 40-10 kPa, pressing (extrusion) at 7 min, 10-12 MPa, drying and stabilization at 10-12 MPa, cooling of dried products t = 20-25 0C 4 hours, packaging of finished products at t = 35 0C and relative humidity 70 %.

Development of regulatory and technical documentation for the examination of equipment operating under pressure

The main problem: the current directions of its development are determined in the article by conducting a theoretical analysis of philosophical, pedagogical, psychological, scientific and methodical works on the training of specialists for the development of the cognitive activity of teenagers. Currently, it is shown that the training of specialists in the development of cognitive activity of teenagers is a pedagogical and psychological problem. Purpose: to clarify the theory and propose a technology for the training of pedagogical and psychological specialists for the development of the cognitive activity of adolescents. Methods: When conducting the research, it was important to take into account statistical data that were sufficiently understandable and reliable. Therefore, in the framework of our research, we used the methodology of B. E. Milman, survey, method of expert evaluation, conversation, questionnaire, interview, series of tests, which include observation and open questions. The results and their significance: according to the results, the methodological predominance of the average level of social intelligence allowed students to see the following signs: the social significance of professional behavior, actions, relationships, full mastery of theoretical knowledge. During the course, we believe that the existence of a reflexive culture, which is evidenced by the improvement of communication in everyday life, in turn, is very valuable. Development of thinking, training and education of future teachers-psychologists, preparation for creative activity depend on methodological competence, qualifications and training of the teacher in the organization of research activities. Self-learning needs and skills do not arise by themselves. Such qualities begin to be formed in the process of organizing educational activities during the joint work of teachers and students in and out of class, even during school. In accordance with the tasks of the professional training of the future pedagogue-psychologist, active methods of training - problem-based lectures, seminars, debates and discussions, professional-oriented special courses, course and diploma works, scientific studies of school pedagogy and didactics, educational events such as scientifically organized forms of continuous pedagogical practice. As a result of mastering pedagogical activity, professional motivation of future pedagogical-psychological specialists is formed, understanding of goals and tasks, subject, psychological-pedagogical and didactic-methodical knowledge is developed, as well as relevant skills and abilities necessary for the development of cognitive activity of teenagers.

Main problem: The article highlights the problem of tests as methods of psychology, the influence of validity and reliability on the results of psychological research. Purpose: Uncovering the significance of validity and reliability on psychological research results. Results and their significance: Testing is an important method in psychology, allowing measuring various aspects of the psyche and behavior of a person. The history of the development of tests in psychology goes back more than a century and began with the work of Francis Galton and Alfred Binet. Over time, the tests have become widely used in various fields such as education, personnel selection, clinical diagnosis and research. Basic requirements for tests include reliability (repeatability of results), validity (measurement accuracy), standardization (same test conditions) and objectivity (lack of subjectivity in assessment). Tests must be designed using psychometric principles to ensure accuracy and validity of results. Modern tests include a variety of measurement techniques, such as tests of personality, intelligence, aptitude, and professional skills. The use of tests in psychology requires professional training to correctly interpret the results and make valid conclusions. Testing as a method of psychology continues to evolve, and its role remains key in the study of the human psyche and behavior. Testing in psychology has a wide range of applications, including assessing personality traits, identifying psychological disorders, and predicting behavior and success in various areas of life. The development of computer-based tests and online platforms makes testing more efficient and convenient for researchers and participants. Modern tests increasingly take into account cultural differences and the diversity of individual characteristics, which contributes to more accurate and tailored assessments. It is important to remember that the use of tests requires ethics, confidentiality and compliance to ensure the reliability and validity of the data obtained.

The main problem is the relevance of the research topic. The history of the development of civilization shows that law and morality as components of the spiritual culture of society are organically linked to each other. The legal system of any state enshrines the moral requirements and moral principles that are vital for the whole society. When creating norms or improving them, the legislator must take into account the state of the public moral culture of the population so that the laws being developed are fair and perceived by members of society. Purpose: The purpose of the study is the further theoretical development of a set of criminal law issues related to determining the place of morality in the system of objects of criminal law protection, their role in the system of measures to combat crime, as well as the development on this basis of proposals and recommendations for improving criminal legislation regulating liability for attacks on public morality. Methods: Methodology and methodology of the study. The methodological basis of the study was made up of: generally recognized methods of scientific research of the phenomena of reality in their interrelation and interdependence both at the theoretical level (systemic, comparative legal, formal legal, historical methods of analysis, etc.) and at the empirical level (statistical analysis, questionnaires, research of documents, printed publications); the main provisions of the theory of criminal law, ethics, philosophy, psychology; rules of formal logic. The results and their significance: The stated circumstances, as well as the lack of elaboration and discussion of most of the provisions related to the modern legal regulation of crimes against public morality and their qualifications, determined the choice of the research topic. Crimes against morality are mostly committed intentionally. For example, involvement in prostitution, the organization of brothels for prostitution or maintenance, as well as other types of criminal acts directed against humanity (morality), are committed with direct intent. A person who organizes and maintains brothels for prostitution is aware that he is doing this for profit. Among the crimes committed against humanity (morality), animal abuse is committed mainly out of hooligan motives.

The main problem: The development of theoretical aspects of legal education, legal awareness. Organizational forms of legal education. Forms and methods of education of legal awareness, legal culture. Features of the formation of legal culture in the modern period. Problems of improving legal culture and legal education. Legal education forms a sense of confidence and independence in the legal sphere among the population of the state, thereby stimulating the legal activity of an individual, which presupposes voluntary, conscious, proactive, socially and morally responsible human behavior. Purpose: The article deals with the legal education of modern youth. The means of forming a legal culture are the promotion of law, the development of legal knowledge among citizens, the practical strengthening of the rule of law, the presence of a strong legal science, the improvement of the system of legal acts, which is achieved due to the presence in the state of a democratic, effective constitution and high legal and technical-legal quality of laws and by-laws. Methods: Methodology of the study. The methodological basis of the study was made up of: generally recognized methods of scientific research of the phenomena of reality in their interrelation and interdependence both at the theoretical level (systemic, comparative legal, formal legal, historical methods of analysis, etc.) and at the empirical level (statistical analysis, questionnaires, research of documents, printed publications); the main provisions of the theory of criminal law, ethics, philosophy, psychology; rules of formal logic. The results and their significance: In this regard, there is a need to create a Republican Center for Legal Education at the Institute of State and Law, which will provide scientific research on the problems of legal education and upbringing, the development of the content and methodology of legal education at all levels of continuing education of students.