Annotation: The article is devoted to the current problem of differential diagnosis of diseases of viral etiology in farm animals. Viral diseases are currently widespread, occupy a leading role in the infectious pathology of farm animals, causing enormous economic damage. Given the magnitude of animal vaccine prophylaxis, in order to increase the effectiveness of antiepizootic measures, the urgent issue i s the development of methods for the rapid and effective detection and differentiation of field and vaccine strains of the infectious rhinotracheitis virus in cattle. The possibility of using a polymerase chain reaction to identify and differentiate a vacc ine strain from epizootic strains and isolators of the cattle infectious rhinotracheitis virus is considered. In the process of research, a PCR-RFLP analysis method was developed to detect the IRT virus in the test material. The PCRRFLP analysis method was used to identify and differentiate the vaccine strain TK-A form epizootic strains and isolators of the cattle IRT virus. The principle of PCR, based on repeated repetition of DNA cycles, annealing and synthesis, which leads to an increase in the number of specific DNA fragments of the pathogen, allows you to take into account the results of PCR in an agarose gel. Analysis time is about 30 hours. The sensitivity of detecting viral DNA is 1-10 picograms (102 TCD). Due to characteristics such as relative simplicity and reaction rate, high sensitivity, specificity and reproducibility, PCR has recently become widespread in basic and applied research in various fields of biological science, including veterinary virology. The results obtained during the studies show that the use of PCR-RFLP allows to differentiate field and vaccine strains and isolates of the IRT virus with a high degree of reliability. The use of PCR -RFLP analysis increases the efficiency and informativeness of studies in the molecular epizootol ogy of cattle RTI, as it allows not only to identify the DNA of different virus strains regardless of their nature, but also to differentiate between them, including differentiating the strain TK-A used for the production of attenuated vaccines against epizootic strains and isolates of the virus.

Annotation: Among many environmental conditions that affect a person, the most important factor is nutrition. Today, there is no doubt that there is a direct link between nutrition, health and disease. Proper nutrition ensures normal growth and development of a person, contributes to the prevention of diseases, has a positive impact on life expectancy and creates conditions for adaptation to the environment. A very actual topic for public catering in the Republic of Kazakhstan, namely for fast food companies, is the development of new recipes and culinary products from relatively inexpensive vegetable raw materials, as well as qualitatively new food products with a purposefully changed chemical composition. One of the main ways of solving problems of expanding the production of products for quick service, as well as products for dietary and therapeutic and preventive nutrition is the use of sprouted grains and beans. In this article, poly-grain mixtures of sprouted wheat and extruded soy beans in different ratios are studied and considered. Poly-grain mixtures developed by us are balanced in nutrients, vitamins and amino acids. The research was carried out on the basis of the accredited testing laboratory of RUBICOM enterprise LLP and the scientific laboratory of the Innovative Eurasian University. The purpose of this work is to study a promising method for increasing the nutritional value of grain mixtures by extruding them at different temperature conditions. To achieve this goal, the following tasks were planned: – to study the grain of soy beans and sprouted wheat on the organolepti c characteristics and chemical composition of the poly-grain mixture; – examine the chemical composition of the poly-grain mixture before extrusion; – choose the optimal mode of the extrusion process; – study and analyze the chemical composition of poly-grain extruded mixture; It should be noted that we have developed for the first time the optimal technological mode of extrusion of poly-grain mixture from sprouted wheat and soy beans, and the physical and chemical composition of the poly-grain mixture was studied. The results of the research presented in this paper are the basis for the development of recipes and technologies for fast food products. The reliability and validity of scientific statements is confirmed by the choice of modern methods of chemical composition analysis.

Annotation: The article presents studies on the morphological picture of the blood of fish in a comparative aspect, depending on age and species. In recent years, the influence of anthropogenic factors on the ecosystem of water bodies has intensified. In this regard, the main direction of solving the problems of ichthy -epizootological situations is new areas in veterinary medicine, in particular, hematological recognition of shaped elements in the blood of fish. To identify and understand the state of the fish organism, which they reflect, the researcher must first of all correctly determine these forms of cells in the blood, especially this applies to white blood cells. Our review is brief and does not pretend to be completely complete literature data on this issue. All this together gives a complex morphological picture of the blood of fish, which is difficult to typify. Unlike higher vertebrates, fish lack bone marrow and lymph nodes, hematopoiesis occurs both in organs, which include reticular syncytium (gill apparatus, kidneys, lymphoid organ), and vascular endothelium of the gill apparatus and heart and spleen and, in some cases, intestinal mucosa. In bone fish, the anterior part of the kidneys is the main organ of hematopoiesis; hematopoiesis also occurs in the lymphoid organs and in the spleen. The purpose of this research is to study the morphological picture of the blood of fish in a comparative aspect, depending on age and species. 3-7 animals from each age group of fish were examined on average. To study the morphological composition of blood from fish, blood was taken from gill vessels and from the heart cavity. In the process of research, it was found that the peculiarity of fish is the presence in the blood of both mature and young red blood cells, red blood cells have nuclei. Bony fish have four types of myeloid cells at all stages of development, known in the hematology of higher vertebrates and humans. A distinctive feature of fish granulocytes is the ability to observe leukocytes in all successive stages of filling the cytoplasm with granules, and the nucleus of th ese cells is very rarely lobed. Unlike fish, in mammals it is very difficult to distinguish between the stages of development of basophils and eosinophils (myelocytes, juvenile, stab and segmented), since the segmentation of the nucleus is weakly expressed , and the number of granules does not increase as the cells mature. It can be noted that the studies initiated can contribute to determining the choice of hematological studies. Given the above factors, a detailed epidemiological classification of hematolo gical studies will be obtained. The research results make certain additions to the procedures of veterinary-hematological studies in the field of ichthyopathology. In the future, research will continue in the direction of hematological diagnosis of fish di seases and prerequisites will be created for a detailed epidemiological classification of hematological studies.

Annotation: This paper presents the results of the influence of ultrasonic treatment in the cofermentation of the cattle manure mixture (cattle) with the leaven from the rumen of ruminants on the process of biogas production. Anaerobic digestion was carried out in matinence periodic operation at the mesophilic temperature of 38 C ̊. As a substrate, a mixture with a content of 70 % cattle manure and 10 % leaven from rumen of ruminants was used. Treatment with ultrasound of the mixture was carried out at an intensity of 10 W/cm2 and an amount of input energy of 9350 kJ/kg of dry matter (DM), which completely eliminated the processes of stratification and sedimentation. Decomposition of organic matter (OM) in the periodic regime with the enzyme and ultrasound treatment occurred within 8 days, the usual substrate during this time OM decomposed 3.0 times less (only 14 %). The process of fermentation of methane in continuous and periodic modes treated with ultrasound, as at other temperatures, was stable, as can be judged by the values of volatile fatty acids (VFA) Volatile fatty acids (VFAs), alkalinity, pH, and biogas. The energetical efficiency of methane fermentation is estimated by comparing the volume of fuel (biogas) and heat consumption for technological needs. As shown by the comparison of efficiency of different regime, the largest amount of commercial energy in the form of biogas was obtained in the mode of joint fermentation of a mixture of cattle manure (cattle) with a ferment from the rumen of ruminants treated with ultrasound – 3 times more than without treatment (space).

Annotation: The article presents the results of implementing a quality management system at the enterprise. The study and analysis of the international standard ISO 9001:2015, as well as sanitary and epidemiological requirements for production control were carried out. The main requirements and rules for the implementation of input, operational and output control of products at enterprises at all stages of the product life cycle were identified and presented. In addition, it was determined what requirements must be met by enterprises to implement a quality management system. It is important to note that this work is necessary at the enterprise, as it has the following advantages: by improving product quality, product sales increase, the level of management of the enterprise and personnel increases, and cost savings are realized at the stages of development, production and operation. It follows that to implement a quality management system, it is necessary to set the following tasks: describe the company's processes, develop performance criteria and evaluate processes, develop the necessary documented information, implement documentation in all departments, familiarize them with the quality policy and goals, conduct timely internal audits for further SWOT analysis, and conduct an assessment by an external auditor in order to obtain a certificate of compliance. An important step in quality management is that the organization should not eliminate nonconforming results of processes, but should identify potential nonconformities, assess the risk with the preparation of a Protocol, plan and implement actions to reduce risks. Difficulties may arise: lack of understanding by the staff of the need to implement a quality management system, lack of a clear vision, mission, lack of complete information on processes, lack of quantitative and qualitative evaluation criteria, quality is defined as the quality of products, not as the quality of processes, resources, lack of monitoring of customer satisfaction. It is possible to overcome these difficulties only with the implementation of the quality management system according to ISO 9001, since the requirements prescribed in the international standard are a real tool for improving the efficiency of the enterprise, which will help bring the organization to a higher level of development.

Annotation: In the article presents the results of studies on the effect of temperature and pressure on the chloride sublimation of zinc and lead from converter dusts of steel production. Currently, an objective necessity is the development of dust utilization technologies for converter steel production, with its further use in production and production of by-products. The use of dust allows not only to save natural raw materials, but also increases production efficiency and improves the environmental situation. The content of non-ferrous metals in dusts makes it difficult to process and use them in agglomeration or in blast furnace production, while the iron content in converter dusts (sludges) makes it possible to use them as promising metallurgical raw materials. Therefore, for a more complete processing of dusts, extraction of non-ferrous metals from them is proposed. The purpose of this work was to determine the possibility of extracting zinc and lead from sludges of the converter production by the method of chloride sublimation. We used dust containing: 86,3 % Fe2O3, 3,5 % FeO, 0,9 % Al2O3, 1,6 % CaO, 0,9 % MgO, 1,1 % MnO, 0,8 % SiO2, 4,4 % ZnO, 0,5 % PbO. The study was conducted in the temperature range 200-1600 degrees C and pressures of 0,01; 0,1 and 1 bar based on a complete thermodynamic analysis using the HSC – 5.1 software package. Finnish metallurgical company Outokumpu, based on the principle of minimum Gibbs energy. According to the results of the studies, it was found that, at normal pressure, lead chloride sublimationbegins at a temperature of 600 degrees С, and zinc - at 900 degrees С: a decrease in pressure to 0,01 bar reduces the temperature to 500 degrees С and 700 degrees С, respectively; lead chloride sublimation under equal conditions is more complete than zinc; To achieve zinc chloride distillation at the level of 90-96 %, the process must be carried out at 1145-1200 degrees С and pressure from logP = -2 to 1,2 bar, while the degree of lead chloride distillation is 99,8-100 %.

Annotation: In the article, the object of research is the telecommunications industry of the info communication services market of the Republic of Kazakhstan. Despite the fact that the structure of the communications and telecommunications market of the republic has changed significantly for the better in recent years, the development of various segments of the industry has diverse regularities that form quite definite trends that determine the prospect of their development. In this regard, the aim of the research was the analysis of the state of the telecommunications industry of Kazakhstan, identification of the main players in the industry, identification of tendencies and regularities of development of its segments. As a scientific tool for solving the problem set in the article, a set of methods of statistical and analytical analysis was used, on the basis of which the main provisions of the analysis, problems and tendencies of development are justified and illustrated. It should be noted that the market of information and communication services of the Republic of Kazakhstan is characterized by a state presence, the essence of which is manifested both in the use of tools that form structural and technological shifts in the development of market industries, and support for its development in priority areas that determine the competitiveness of the market of the state, as a whole. One of these tools in the development of the information and communication sector of the Republic of Kazakhstan is the state program “Digital Kazakhstan”. The development of the market is accompanied by the emergence of new players in it from the technology sector, and as a result, increase of the competition for consumer through the expansion of the range of services, improving their quality and pricing policy. As a result of competition, a pool of leading operators has been formed in the sphere of telecommunications services in the republic, whose activity already go beyond the national framework. At the same time, the infrastructure of the industry, which is characterized by the dominance of analog data transmission system and the underdevelopment of digital and satellite infrastructure, still needs to be improved. Taking into account the forecasts of rapid growth in the near future in the global market of mobile telecommunications services, this will require both from operators and from the state, in general, modernization of the existing telecommunications infrastructure, as one of the important factors of Kazakhstan’s entry into the global information space.

Annotation: Rapidly changing trends in development of the countries’ economies require rational approach to regulation of innovative activity and investments directed to organization of real economy sector. At the same time, for analysis of current state policy in innovative development system fully it takes to assess effectiveness of regulation innovative activity mechanisms in the economy of Kazakhstan. In this article an assessment of mechanisms of innovative activity regulation in Kazakhstan in global system of competitiveness is carried out. For this purpose, an expert assessment system is used, which is realized as method of Global Competitiveness Index of World Economic Forum (WEF). The authors investigate ranking of WEF in Kazakhstan economy, in particular, assessment of carrying out of country’s innovative activity. Thus, purpose of research is to assess mechanisms of innovative activity regulation in Kazakhstan in a global system of competitiveness. Methodology – synthesis, content-analyze, accommodation, monographic method, factor analysis, economic-statistical research method. Carried out assessment of mechanisms of innovative activity regulation in Kazakhstan in global system of competitiveness allowed fully assess effectiveness of regulation innovative activity mechanisms in economy. Researching subindices of International rating of World Economic Forum for 2017-2018 in relation to 2013-2014 authors noted that in Kazakhstan today there is decrease in all subindices of rating and factors (“Basic requirements”, “Business sophistication”), except for “Innovation” subindex. This subindex was significantly decreased due to sharp deterioration in macroeconomic environment, which is directly related, in opinion of authors, to significant losses in revenues from oil export. This in turn affected deterioration of budget’s indicators. There is special attention to place and role of innovative activity regulation in country’s socio-economic policy. Organizational-methodological problems during realization of innovative policy in Kazakhstan are also in details investigated, which makes it necessary to solve them in order to achieve innovative policy’s efficiency at regional and national levels.

Annotation: This article discusses the main possible directions for coordinating the tax policy of member countries of economic and monetary unions. The regulatory role of tax instruments in regional integration associations is assessed. The relevance of the article is due to the fact that with the accelera tion of integration processes in various regions of the world, fiscal policy becomes particularly important. Therefore, the research of representatives of various scientific schools pays much attention to the analysis of the impact of the fiscal component on the economies of the member countries of the associations. At the same time, approaches to the organization of taxation within economic unions differ significantly. The activation of integration processes in the Eurasian Economic Union (EEU) necessitates the convergence of the legislation of the member States in the field of taxation. At the same time, the harmonization and unification of legislation on indirect taxes is particularly relevant, since these taxes have a significant impact on price formatio n and provide a significant part of budget revenues. According to the authors of the article, in the conditions of deepening integration in the EEU, a well-thought-out distribution of powers in the field of tax regulation between state and supranational bodies that ensure a consistent convergence of the tax systems of the participating countries, taking into account the economic situation and the interests of all members of the Association, becomes particularly relevant. Measures to ensure the elimination of double taxation within the Union are proposed. The authors conclude that it is necessary to harmonize the tax policies of the member States of the Eurasian Union. At the same time, the harmonization of taxation in the countries of the Union should become a condition for the formation of a currency zone on the territory of the EAEU.

Annotation: The research explores the scientific approach to the concept and essence of the forensic characteristics of crimes, the concept’s formation history, and also draws attention to the role and place of this scientific category in the theory of modern forensic science. The article emphasizes that the forensic characteristic, which is an independent element of a private forensic methodology for investigating crimes, is one of the basic concepts of forensic theory and practice. The author notes that the phrase “forensic characteristics of crimes” should be understood as an ordinary data system on the elements of certain types of crimes and their mechanisms. Concerning specific crimes, it is necessary to consider the issue of the forensic information system for a specific offence, which is reduced to the subject of the investigation. The article emphasizes the importance of the category of “forensic characteristics of a crime” for countering novel criminal offences, among which the author highlights cybercrime. There is no doubt that this concept of the forensic characteristics of crimes is capable of investigating the main practical goals, including new elements of criminal offences, along with the solution of scientific tasks for the disclosure, investigation and prevention of crimes. As a result, the author concludes that it is precisely the concept of the forensic characteristics of crimes formulated in the article that, along with the solution of scientific tasks for the disclosure, investigation and prevention of crimes, is capable of Вестник Инновационного Евразийского университета. 2020. № 2 ISSN 1729-536X 67 implementing tasks related to the main practical goals of the investigation, including new elements of criminal offences.