The scientific journal

Bulletin of the Innovative University of Eurasia

Submit an article for review by the editorial board

+7 (7182) 31-64-83

journal@ineu.kz

Back

Search on site

Search results: А.С. Габдуллина «№ 1 емхана» PHV бойынша психолог КГП Е.М. Раклова

Number of results: 113


Species belonging to Aspleniaceae Newm. and Pteridaceae Reichenb. families which are spread in the Nakhchivan Autonomous Republic
Annotation:

The article presents information on the distribution of some species of ferns at the territory of the Nakhchivan Autonomous Republic. The authors note that 10 species of plants are summed in 4 families and 7 genera which belong to ferns. In Aspleniaceae Newm. family it can be found 4 species in two genera in Pteridaceae Reichenb. There are two species in one genus. Data about the area of distribution of these species and their significance are provided in the article.

Year of release: 2014
Number of the journal: 1(53)
Heading: Natural sciences

Мotivating the informal assistance in the long-term care for elderly and disabled people system in Кazakhstan
Annotation:

This article discusses the possible options to stimulate informal assistance in Kazakhstan system of long-term care for elderly and disabled persons over the age of 18 years who need to be cared for 8 or more hours daily. Developed in the context of world experience the norms and rules of allocating financial resources in order to optimize partnership between levels of State and family care will increase the levels of quality of life for elderly and people with disabilities.

Year of release: 2012
Number of the journal: 4(48)
Heading: Social sciences

Young people of Кazahstan and obligatory military educating (1941-1945 гг.)
Annotation:

The article describes the participation of Komsomol and the Kazahstan youngsters in soldiers training for the front. The author analyses the preparation of military resources in security and sports organizations and the role of the youth during World War II.

Year of release: 2012
Number of the journal: 4(48)
Heading: Social sciences

Students as members of educational quality assurance of the university
Annotation:

This article focuses on identifying the challenges of quality management of the educational process in the university survey conducted by students of the 2nd year of academies Innovation Eurasian University in 2011-2012. The results showed that students are full and objective evaluators of quality of the education. Also, thanks to the survey was to qualitatively improve the educational process.

Year of release: 2012
Number of the journal: 4(48)
Heading: Humanities

Тhe species composition and nutrition of dominant f
Annotation:

The results of analysis of catches with stationary nets made from 2010 to 2012 in the North Absheron Gulf of the Caspian Sea have been presented. 26 species of fish belonging to 8 families (16 marine species, 10 migratory and semi-migratory species ) is registered in the catches. There are data distribution and abundance of each species for all of the families are summarized. The tendency of expansion of areals of marine species (Alosa braschnikowi kisselewitschi, A.b.sarensis) to the north is registered.

Year of release: 2012
Number of the journal: 4(48)
Heading: Natural sciences

Results of social research of population interethnic integration and interethnic consolidation in Pavlodar
Annotation:

In order to identify how citizens avaluate interethnic relations, activities of state bodies and public institutions to preserve interethnic tolerance and social harmony, in June 2014 a sociological survey was conducted. The article presents the results of this study of interethnic integration and consolidation of Pavlodar population.

Year of release:
Number of the journal:
Heading: Social sciences

Social issues of migrants in Tyumen region: sociological measuring
Annotation:

In the article it is presented the results of the secondary analysis of public opinion research results on social issues of migrants from Central Asia countries based on a questionnaire survey of 1200 respondents living in Tyumen region as well as answers of experts. The statistical data are analysed characterizing the processes of arrival and departure of foreign citizens as well as crime level of immigrants from abroad. The results of public opinion allowed to make a conclusion that the situation in the sphere of labour migration is more favourable than statistics surveys of public opinion againstconcerning migrants in Russia as a whole.

Author: N.G. Hayrulina
Year of release:
Number of the journal:
Heading: Social sciences

Educational potential formation of future primary school teachers at pedagogical higher education institution
Annotation:

The main condition for purposeful forming of students educational potential of speciality 5В010200 «Pedagogics and primary education methodology» is introduction of the special course «Development of educational potential of primary school teacher» into the curriculum. The conducted work is briefly described in the article on the level determination of educational potential components formation for future primary school and method of its forming.

Year of release:
Number of the journal:

Test gauges as a means of assessing learning achievements of students
Annotation:

The main purpose of the new test materials: tests, test items is an objective assessment of the level of mastery of knowledge , skills and abilities , relevant state general education standards in mathematics and the ability to apply them in real life ( in extracurricular life situations ). The article deals with technology making control gauges in mathematics at the secondary school, is an example of the development of such a meter

Year of release:
Number of the journal:
Heading: Social sciences

(Unknown)
Annotation:

On the territory of the State Reserve Zagatala marked about 900 species of plants. These plants are distributed according to a vertical zonation. Of the 11 species of plants (1.2%) of the algae, 45 species (5.0%) - mushrooms, 58 species (6.4%) - lichens, 49 species (5.4%) - mosses, 23 species (2.5%) - the highest spore, 5 species (0.5%) - gymnosperms, 130 species (14%) - monocots, 677 species (65.0%) - dicotyledons.

Author:
Year of release: 2012
Number of the journal: 3(47)
Heading: Natural sciences
Keywords:

Statistical analysis of population growth
Annotation:

In this article the population growth analysis of Pavlodar region between 2004-2013 is presented. Studying the demography development trend in the country the author tried to determine changes in the natural population movement. Statistical analysis of population is relevant in the field of social and political programs development in the country. A dynamic population growth rate of Pavlodar region and its trend model are presented in the article

Year of release: 2015
Number of the journal: 2(58)
Heading: Social sciences

Methods of energy saving increase under during agglomerate production at Aksu Ferroalloy Plant Branch of “Kazchrome” JSC
Annotation:

In this article issues of efficient use of ferroalloys production waste to save costs are considered; energy efficiency of agglomerate production is calculated; sintering heat balance data are presented by a case study of Aksu Ferrolloy Plant. According to the annual economic benefits calculation the folowing results are obtained: due to аglogases recirculation, fuel saving is 1334.5 t.o.e.; due to reheating it is 1491 t.o.e.; due to installation of thyristor converters to the unit the annual energy saving is 1714000 kWh. Thus, it is identified that besides energy-efficiency measures during recycling of solid and gaseous wastes, the use of agglomerate increases IPF electric furnaces performance as well, decreases specific energy and reducing agent consumption which means the prime cost of finished products will be reduced.

Year of release: 2015
Number of the journal: 2(58)

Correlation and regression analysis of population growth of Pavlodar region
Annotation:

In this paper the correlation and regression factor analysis of population growth of Pavlodar region between 2009-2013years. In this article the correlation and regression analysis of fertility by region of Pavlodar region in the period 2009-2013. This analysis relevant in determining the level natural movement of the population according to social factors. In the form factor variable data used general divorce rate in the region and the average housing supply, sq. m. of total area 1 person. According to the results identified a close relationship between the factor and effective sign.

Author: Т.М. Аrzaeva
Year of release: 2015
Number of the journal: 3(59)
Heading: Social sciences

Forming of evaluative bearings of growing up generation
Annotation:

The article has an attempt of figuring out content and character of evaluative notion changes of growing up generation in a new Kazakh society including nowadays difficulties and contradictions. All changes, taking place in our society, first of all economic, sociopolitical, psychical spheres, has influence on evaluative bearings of growing up generation. The authors of the study made a survey among the Kazakh youth, the purpose of which was to identify the value orientations of growing up generation of 14-17 years old.

Year of release: 2015
Number of the journal: 3(59)
Heading: Social sciences

The estimation of consumer properties of bee honey represented in the retail trade network
Annotation:

This article views the research methods allowing by the organoleptic and physical and chemical indicators to estimate the honey naturality and approximately determine its origin due to the results of the analyses. The factors influencing the quality of the produced honey have been considered and the chemical Вестник Инновационного Евразийского университета. 2015. №3 ISSN 1729-536X 167 composition of the useful components of honey has been studied. It is shown that Kazakhstani honey can be rather competitive at the world market and the main task is the increase the honey production without changing its quality.

Year of release: 2015
Number of the journal: 3(59)

The ways of forming of value orientations of students in higher education institution
Annotation:

In this article, the author considers the formation of value orientations of students in higher education institution. According to the author, the values of students are formed under the influence of the social environment. Identifying the relationship between value orientations of students, their individual psychological characteristics, individual creativity, and active engagement in the surrounding world is shown through experimentation. In fact, in the article based on methods M. Rokich "Value orientation", S.S. Bubnov "Diagnostics of real structure of value orientations" and R. Cattell "16 factors, exploring personality characteristics of the" analyzing the content of the process of professional adaptation of students identified significant value orientations.The article presents there sultsof research.

Year of release: 2016
Number of the journal: 1(61)

Body heating automatic control system №1 Innovative University of Eurasia
Annotation:

The paper presents the thermal design of the building heating system of a four educational building № 1 Eurasian innovative university.Data are presented for the period from 1 December to 28 February for three seasons: 2013–2014, 2014–2015, 2015–2016 years. On the basis of the actual thermal design graphics and design of heat were built in the period from 1.12. at 28.02 for three seasons (2013-2014,2014-2015, 2015-2016 years). In these graphs clearly visible difference between the two values. According to calculation, the average difference was 13.02 % of the actual heat consumption.

Author: N.D. Khomarov
Year of release: 2016
Number of the journal: 1(61)

Application of the "Step by Step" technology in the teaching of younger schoolchildren as a means of improving the quality of education
Annotation:

The renewal of the paradigm of 12-year education is associated with the formation of key competencies in students that help to learn, understand and develop the world around. The developed set of tasks is designed to develop the need to transform educational material with the aim of improving the quality of education. This material is compiled in accordance with the age characteristics of primary school students, is aimed at organizing the processes of mastering new ways of acting, which will contribute to the formation of educational and cognitive activities. The issues discussed in the article will allow us to implement a competence approach in the education of students. The tasks presented in the article are intended to activate the educational motivation, the organization of independent cognitive activity, contribute to the systematization and objectification of the processes of monitoring and evaluation of educational activities.

Year of release: 2016
Number of the journal: 3(63)

The role of financial management of healthcare: principles and perspectives
Annotation:

This article reviews the literature on health management. In accordance with the State health care reform and development program for 2011-2019, introduction of new forms of financing for medical organizations that provide economic incentives for their activities and improve the efficiency of the funds is envisaged. The fund holding is the most perspective.

Author: K.S. Kabulov
Year of release: 2016
Number of the journal: 4(64)

Evaluation of biological science component of the functional literacy of secondary school students
Annotation:

The article presents the results of a study of the functional literacy of students in biology of grades 9th. The methodology for assessing the functional literacy of 15-year-old students of the international PISA program is used. Approbation was conducted with the test tasks of different level of complexity for an assessment of natural-science functional literacy. The results of the research showed that in the process of preparing students for the exam it is necessary to conduct systematic work directly with the test tasks and at the same time to develop and strengthen knowledge and skills of the basic level.

Year of release: 2016
Number of the journal: 4(64)

The basic directions of improvement of the functioning quality of electric networks of 6-110 kV
Annotation:

The main directions of increasing the reliability and electrical safety of power distribution networks are considered in the article. The schemes of the main directions of development and improvement of electric grids are given.

Year of release: 2016
Number of the journal: 4(64)

Modern trends of informatization in the educational process of higher education institution
Annotation:

The article describes the basic trends of IT management in the educational process of higher educational institutions. The problem of transition to a new model of education quality, determined by the State Program of Education development of the Republic of Kazakhstan for 2016-2019, causes a broader implementation of information technologies in the process of education. The paper presents the main reasons according to which educational institutions use information systems, as well as the possibility of the results of the introduction of information technologies. These technologies expand the boundaries of information and educational space for more efficient management of the educational process. Summarizing the results of the researches in this field the author identified and analyzed the subsystems of the university management.

Year of release: 2016
Number of the journal: 2(62)

Algorithm of suppression of electromagnetic disturbances
Annotation:

The article considers various methods of suppressing electromagnetic disturbances encountered in the electric power system. Detailed descriptions of methods of suppression, as well as classification of electromagnetic interference on the basis of the source of their occurrence are given. Illustrative diagrams of the 106 Вестник Инновационного Евразийского университета. 2017. № 1 ISSN 1729-536X three methods are shown. Based on the analysis, recommendations were made on improving the noise-proof feature of power equipment.

Year of release: 2017
Number of the journal: 1(65)

Development of measures to increase the efficiency of flue gas cleaning on electrofilters of “EEC” JSC
Annotation:

This article considers the theoretical application of measures to increase the efficiency of electrofilters installed at the electric power plant of "EEC" JSC. The author has identified the reason for the inability to achieve the efficiency of electrofilters close to 100%. Methods for increasing the efficiency of electrofilters for equipment installed at the electric power plant of "EEC" JSC are considered.

Author: V.Е. Sidorenko
Year of release: 2017
Number of the journal: 2(66)

Methods and techniques of art therapy for the correction of hyperactivity of preschool age children
Annotation:

This article contains material about the features of working with pre-school children with attention deficit and hyperactivity disorder. Psycho-corrective effects will be effective if the psychologist cooperates closely with parents and teachers. The choice of methods for correcting ADHD should be individual in nature, taking into account the degree of manifestation of the main manifestations of the syndrome and the presence of concomitant violations. ADHD correction is possible with a variety of therapies, such as art therapy, neuropsychology, game therapy, music therapy, bibliotherapy, sand therapy. The syndrome of hyperactivity influences, first of all, on the development of the emotional sphere of the child of preschool age, which is expressed in an increased sense of anxiety, the occurrence of a large number of fears and other types of emotional disorders.

Year of release: 2017
Number of the journal: 3(67)

Features of anxiety of gymnasts aged 8–11 years during competitions
Annotation:

The article presents the results of the analysis of situational, personal, competitive anxiety and characterological features of 4 gymnasts of the main and 6 girls of the Pavlodar youth team in rhythmic gymnastics.

Year of release: 2017
Number of the journal: 3(67)

The innovative system of educational principles in the system of multilingual education
Annotation:

The article deals with the problems of the formation and development of a multilingual education, the mechanism for the training of multilingual specialists in the educational system of Kazakhstan. The multilingual education as an effective tool for training the younger generation for life in an interconnected and interdependent world is considered.

Year of release: 2017
Number of the journal: 3(67)

Advantages of introducing elements of a quality management system in the construction of highways
Annotation:

The main provisions of the road quality management concept are outlined, as well as the tasks are defined that need to be solved in order to ensure the management of the system at three levels: strategic, tactical and operational.

Year of release: 2017
Number of the journal: 4(68)

The concept of school socially-psychological service of a family
Annotation:

The article presents the results of researching a problem of the organisation in educational institution of the complex socially-psychological family help. On the basis of the analysis of the empirical data the attempt to reveal mechanisms of development of family ability to normal functioning is undertaken, the article defines the maintenance and an activity orientation of school socially-psychological service of psychological support and a psychological family support service of each schoolboy.

Year of release: 2017
Number of the journal: 4(68)

The role and problems of implementing a quality management system
Annotation:

Introduction of the quality management system is an important step for any production. Not only has the competitiveness of enterprise but also further successful development depends on the result of introduction of the quality management system and its proper functioning. Due to a quality management it is possible to obtain not only the improvement of structure of organization but also processes and their results quality. The aim of the article is to study the role of the quality management system in steady development of enterprise and problem of introduction of the quality management system in our country.

Year of release: 2018
Number of the journal: 1(69)

Teaching a foreign language in primary school in the context of updating the content of education
Annotation:

Changes in the education system have influenced the content of education in primary school. Working with younger students requires teachers to use modern methods. Determining the leading principles of teaching, the priority strategies of learning and the organization of an English lesson is what contributes to the 36 Вестник Инновационного Евразийского университета. 2018. № 1 ISSN 1729-536X effectiveness of teaching. The article is devoted to the analysis of the characteristics of teaching English in elementary school in the context of updated educational content. The authors reviewed the elements of the lesson, methods and techniques of organizing the educational process in primary school, described the factors affecting the effectiveness of training. The authors also tried to uncover a number of problems and give recommendations that arise in connection with the tendency to learn English in primary school.

Year of release: 2018
Number of the journal: 1(69)

Expansion of pyroplasmosis of different canine breeds in the Pavlodar city
Annotation:

The article presents the results of studies conducted at the veterinary clinic «Jean» in the city of Pavlodar. It is noted, that for the period 2013-2017. 348 cases of disease in dogs were registered by pyroplasmosis – a protozoal disease caused by parasitic organs of the genus Piroplasma. The authors described the clinical symptoms of disease in animals, as well as the nature of the flow of infectious diseases.

Year of release: 2018
Number of the journal: 1(69)

Development of a quality control system based on the principles of HACCP for the production of sour cream at a diary factory
Annotation:

The article is devoted to risk analysis, methods of ensuring dairy products safety. Furthermore, the author dwells on such tool of quality control as a decision tree. The article presents the plan of HACCP for a diary enterprise on an example of the production a sour cream with 15-20 % of fat content.

Year of release: 2018
Number of the journal: 1(69)

Legal views of the nomads
Annotation:

Annotation. The article discusses the tools for regulating social relations in the Kazakh state, formed by the dominant system of patriarchal-feudal relations from the middle of the 15th century to the beginning of the 17th centuries. Historically, the primary type of legal system in the Kazakh society is associated with the emergence of the Kazakh Khanate.

Author: Zh. Bekturova
Year of release: 2018
Number of the journal: 1(69)
Heading: Humanities

On the issue of improving the quality management system for the development of normative and technical documentation
Annotation:

The article analyzes the system of development, design, storage and operation of normative and technical documentation in regional university. Measures are proposed to improve the quality control of normative and technical documentation, including a project to improve the quality control of technical documentation.

Year of release: 2018
Number of the journal: 2(70)

The influence of trade organizers on the market: the role and functionality
Annotation:

At present, the role of trade organizers in the conditions of a rapidly changing economic situation, global financial crises, and the rapid development of market relations is very important and significant. First of all, in the support of entrepreneurship, the development of trade relations, the promotion of local goods inside the country and abroad, the creation of conditions for the organization and development of trade in general. In this publication, the author analyzes the trade turnover of the Soviet and current periods, as a result of which the 30 Вестник Инновационного Евразийского университета. 2018. № 2 ISSN 1729-536X conclusion follows that, in addition to the state, other subjects of commodity circulation are also needed to create conditions for the development of trade. They were the organizers of trade. However, in the publication a significant place is given to the legal personality of special subjects of trade, the characteristics of the main types and functions of each of them, tasks and goals, as well as the problems of organizers of trade.

Author: D.A. Kuanova
Year of release: 2018
Number of the journal: 2(70)

Organization of psychological and pedagogical support of children in the rehabilitation center
Annotation:

This article deals with the problems of organizing psychological and pedagogical support of children with disabilities in a rehabilitation center. Currently, an extensive system of institutions of the Ministry of Вестник Инновационного Евразийского университета. 2018. № 2 ISSN 1729-536X 91 Education, Health, Labor and Social Protection has been established in our country, in which medical, social, psychological and pedagogical support is provided for the development of children with disorders of the musculoskeletal system. The main task of maintenance is the creation of psychological and pedagogical conditions for the full development and development of a socially successful person, the protection of the rights of the child to receive education and development in accordance with their potential in the real conditions of their existence. The leading principles of support for the development of the child in an educational institution are: the advisory nature of the accompaniment; priority of the interests of the child; an individual approach accompanied by the development of the child; maintenance continuity; integrated (multidisciplinary) approach, accompanied by development.

Year of release: 2018
Number of the journal: 2(70)

The status of Bank liquidity in the Republic of Kazakhstan in modern conditions
Annotation:

This article examines the analysis of the banks liquidity of the second level of the Republic of Kazakhstan for 2015 to 2018. Also examines the role and policy of the National Bank of Kazakhstan in the process of regulating the liquidity of the banking sector is considered

Year of release: 2018
Number of the journal: 3(71)

The role of Vetom 1.1 in the correction of the immune status of the body of pigs
Annotation:

This article describes the factors that adversely affect the development of the body of young animals and contribute to reduce their productivity. One of the ways to solve this problem is the use of probiotic preparations, in this case Vetom 1.1. Research methods are presented, an analysis of the data obtained is made, according to which a conclusion is drawn about the high effectiveness of the use of probiotic Vetom 1.1 in swine production

Year of release: 2018
Number of the journal: 3(71)

Current state and development trends of nanotechnology in the Republic of Kazakhstan
Annotation:

Nanotechnology is a field of fundamental and applied science and technology dealing with a combination of theoretical substantiation, practical methods of research, analysis and synthesis, as well as methods for the production and application of products with a given atomic structure through controlled manipulation of individual atoms and molecules. In the Address of the President of the Republic of Kazakhstan to the people of Kazakhstan Strategy "Kazakhstan-2050" New political course of the state, the leader of the nation, N.A. Nazarbayev, defines 10 tasks that Kazakhstan faces, one of which is the transition of Kazakhstan to the third industrial revolution. Nanotechnology is one of the branches of the industrial revolution. In the modern world, over the past few years, there has been a rapid development of nanotechnology. The peculiarity of nanotechnology lies in the possibility of their application in an unlimited sphere; therefore they are the basis for a completely new technological order of the economy. Сonsequently, its development in the country is regarded as a particularly important sphere of science. Usage of nanotechnology products will save on raw materials and energy consumption, reduce emissions to the atmosphere and, as a result, will contribute to sustainable economic development.

Year of release: 2018
Number of the journal: 4(72)

Research in the development of an adaptive and multifunctional online store
Annotation:

The article is available the problem of developing an online store. National statistics of the Republic of Kazakhstan for 2018. The advantage of the developed online store "EComKZ" and client-server application "EComQazaqstan". Services from Google companies are described, NoSQL databases are reviewed, and tools for creating an online store are provided.

Year of release: 2019
Number of the journal: 1(73)

Optimization of the nutrient medium for cultivation of the lactic acid bacteria lactobacillus casei bm-4/17 b-rkm 0746 in a bioreactor
Annotation:

This article presents a comparative analysis of nutrient media for the cultivation of lactic acid bacteria Lactobacillus casei BM-4/17 B-RKM 0746 in a bioreactor. The main criteria for identifying the effectiveness of the nutrient medium were the accumulation of the highest biomass of lactic acid bacteria cells and the amount of nutrient medium components in relation to the biomass obtained.

Year of release: 2019
Number of the journal: 1(73)

Development of technology for the purification of water from mercury pollution
Annotation:

The object of the study was water and bottom sediments of the lake Balkyldak of Pavlodar region, contaminated by mercury wastes.The purpose of the work is the creation of innovative cost-effective technologies for deep cleaning of aqueous media from mercury to the level of 1-10 parts per trillion, which will be tested for the cleaning of the lake Bylkyldak facilities in Pavlodar region.

Year of release: 2019
Number of the journal: 4(76)

Digitalization of Kazakhstan’s auto industry, transport and logistics: organizational and legal aspects
Annotation:

The present article analyzes the problematic issues of digitalization of the automotive industry, motor transport and logistics in the Republic of Kazakh stan. The main emphasis is made on the consideration of positive results for the economy and society, which is the digitalization of the automotive industry, transport and logistics, the analysis of the tasks and content of digitalization in these sectors, the analytical study of the prospects of legal regulation of the automotive industry, motor transport and road logistics in the form of domestic legislative and international legal means to improve digitalization in these areas. The names and substantiation of 7 draft laws of Kazakhstan, which could be adopted in the near future by the Kazakh legislator, Вестник Инновационного Евразийского университета. 2019. № 2 ISSN 1729-536X 35 are proposed. The most important and priority bills include: «On state management of digital (creative) economy», «On the development of intelligent transport system in production and operation», «On the introduction of digitalization in the activities of companies, enterprises and institutions », «On the improvement of logistics based on digital technology along all the Kazakhstan roads».

Year of release:
Number of the journal:
Heading: Social sciences

Monitoring of drinking water in the water supply system of Ekibastuz city
Annotation:

On the basis of research on bacteriological indicators of the water supply system in the Ekibastuz region for the period 2016-2018 the 310 cases of detection of pathogenic microflora were identified. The chemical indicators are given the results of research to determine the content of toxic elements and heavy metals in the source and purified water, as well as in the distribution network of Ekibastuz. The largest number of pathogenic microflora cases and a high concentration of chemical elements are noted during the flood season. Sporadic pathogenic microflora and chemical elements are also recorded in the winter and summer periods.

Year of release: 2019
Number of the journal: 2(74)

Criminalistic characteristics of trafficking in minors and substitution of a child
Annotation:

Protection of the rights and legitimate interests of the individual is one of the main activities of the state. And the protection of human rights begins with respect for the rights of the child, who, because of his physical and mental immaturity, needs special care from the state and society. The transition of the Republic of Kazakhstan in the 1990s to a market economy, accompanied by a deep economic crisis, had a negative impact on the traditional spheres of social structure: work, family, education. As a result, at that time Kazakhstan and a number of other CIS countries turned into exporting countries of children, supplying them to foreign countries for adoption by foreign citizens. Numerous facts of adoption of children-citizens of the CIS countries by foreign citizens, which are essentially the sale of minors, often indicate a criminal and mercenary nature on the part of officials of guardianship and other state bodies.

Year of release: 2019
Number of the journal: 3(75)
Heading: Social sciences

The forensic characteristics of criminal offenses
Annotation:

The research explores the scientific approach to the concept and essence of the forensic characteristics of crimes, the concept’s formation history, and also draws attention to the role and place of this scientific category in the theory of modern forensic science. The article emphasizes that the forensic characteristic, which is an independent element of a private forensic methodology for investigating crimes, is one of the basic concepts of forensic theory and practice. The author notes that the phrase “forensic characteristics of crimes” should be understood as an ordinary data system on the elements of certain types of crimes and their mechanisms. Concerning specific crimes, it is necessary to consider the issue of the forensic information system for a specific offence, which is reduced to the subject of the investigation. The article emphasizes the importance of the category of “forensic characteristics of a crime” for countering novel criminal offences, among which the author highlights cybercrime. There is no doubt that this concept of the forensic characteristics of crimes is capable of investigating the main practical goals, including new elements of criminal offences, along with the solution of scientific tasks for the disclosure, investigation and prevention of crimes. As a result, the author concludes that it is precisely the concept of the forensic characteristics of crimes formulated in the article that, along with the solution of scientific tasks for the disclosure, investigation and prevention of crimes, is capable of Вестник Инновационного Евразийского университета. 2020. № 2 ISSN 1729-536X 67 implementing tasks related to the main practical goals of the investigation, including new elements of criminal offences.

Author: A.O. Shakenov
Year of release: 2020
Number of the journal: 2(78)
Heading: Law

Assessment of the mechanisms of regulation of innovative activity in the system of global competitiveness
Annotation:

Rapidly changing trends in development of the countries’ economies require rational approach to regulation of innovative activity and investments directed to organization of real economy sector. At the same time, for analysis of current state policy in innovative development system fully it takes to assess effectiveness of regulation innovative activity mechanisms in the economy of Kazakhstan. In this article an assessment of mechanisms of innovative activity regulation in Kazakhstan in global system of competitiveness is carried out. For this purpose, an expert assessment system is used, which is realized as method of Global Competitiveness Index of World Economic Forum (WEF). The authors investigate ranking of WEF in Kazakhstan economy, in particular, assessment of carrying out of country’s innovative activity. Thus, purpose of research is to assess mechanisms of innovative activity regulation in Kazakhstan in a global system of competitiveness. Methodology – synthesis, content-analyze, accommodation, monographic method, factor analysis, economic-statistical research method. Carried out assessment of mechanisms of innovative activity regulation in Kazakhstan in global system of competitiveness allowed fully assess effectiveness of regulation innovative activity mechanisms in economy. Researching subindices of International rating of World Economic Forum for 2017-2018 in relation to 2013-2014 authors noted that in Kazakhstan today there is decrease in all subindices of rating and factors (“Basic requirements”, “Business sophistication”), except for “Innovation” subindex. This subindex was significantly decreased due to sharp deterioration in macroeconomic environment, which is directly related, in opinion of authors, to significant losses in revenues from oil export. This in turn affected deterioration of budget’s indicators. There is special attention to place and role of innovative activity regulation in country’s socio-economic policy. Organizational-methodological problems during realization of innovative policy in Kazakhstan are also in details investigated, which makes it necessary to solve them in order to achieve innovative policy’s efficiency at regional and national levels.

Year of release: 2020
Number of the journal: 2(78)

Extraction of non-ferrous metals from dusts of converter steel-melting production
Annotation:

In the article presents the results of studies on the effect of temperature and pressure on the chloride sublimation of zinc and lead from converter dusts of steel production. Currently, an objective necessity is the development of dust utilization technologies for converter steel production, with its further use in production and production of by-products. The use of dust allows not only to save natural raw materials, but also increases production efficiency and improves the environmental situation. The content of non-ferrous metals in dusts makes it difficult to process and use them in agglomeration or in blast furnace production, while the iron content in converter dusts (sludges) makes it possible to use them as promising metallurgical raw materials. Therefore, for a more complete processing of dusts, extraction of non-ferrous metals from them is proposed. The purpose of this work was to determine the possibility of extracting zinc and lead from sludges of the converter production by the method of chloride sublimation. We used dust containing: 86,3 % Fe2O3, 3,5 % FeO, 0,9 % Al2O3, 1,6 % CaO, 0,9 % MgO, 1,1 % MnO, 0,8 % SiO2, 4,4 % ZnO, 0,5 % PbO. The study was conducted in the temperature range 200-1600 degrees C and pressures of 0,01; 0,1 and 1 bar based on a complete thermodynamic analysis using the HSC – 5.1 software package. Finnish metallurgical company Outokumpu, based on the principle of minimum Gibbs energy. According to the results of the studies, it was found that, at normal pressure, lead chloride sublimationbegins at a temperature of 600 degrees С, and zinc - at 900 degrees С: a decrease in pressure to 0,01 bar reduces the temperature to 500 degrees С and 700 degrees С, respectively; lead chloride sublimation under equal conditions is more complete than zinc; To achieve zinc chloride distillation at the level of 90-96 %, the process must be carried out at 1145-1200 degrees С and pressure from logP = -2 to 1,2 bar, while the degree of lead chloride distillation is 99,8-100 %.

Year of release: 2020
Number of the journal: 2(78)

Influence of ultrasonic treatment on the efficiency of biogas production
Annotation:

This paper presents the results of the influence of ultrasonic treatment in the cofermentation of the cattle manure mixture (cattle) with the leaven from the rumen of ruminants on the process of biogas production. Anaerobic digestion was carried out in matinence periodic operation at the mesophilic temperature of 38 C ̊. As a substrate, a mixture with a content of 70 % cattle manure and 10 % leaven from rumen of ruminants was used. Treatment with ultrasound of the mixture was carried out at an intensity of 10 W/cm2 and an amount of input energy of 9350 kJ/kg of dry matter (DM), which completely eliminated the processes of stratification and sedimentation. Decomposition of organic matter (OM) in the periodic regime with the enzyme and ultrasound treatment occurred within 8 days, the usual substrate during this time OM decomposed 3.0 times less (only 14 %). The process of fermentation of methane in continuous and periodic modes treated with ultrasound, as at other temperatures, was stable, as can be judged by the values of volatile fatty acids (VFA) Volatile fatty acids (VFAs), alkalinity, pH, and biogas. The energetical efficiency of methane fermentation is estimated by comparing the volume of fuel (biogas) and heat consumption for technological needs. As shown by the comparison of efficiency of different regime, the largest amount of commercial energy in the form of biogas was obtained in the mode of joint fermentation of a mixture of cattle manure (cattle) with a ferment from the rumen of ruminants treated with ultrasound – 3 times more than without treatment (space).

Year of release: 2020
Number of the journal: 2(78)

The detection of the virus of infectious rhinotracheitis in cattle by polymerase chain reaction
Annotation:

The article is devoted to the current problem of differential diagnosis of diseases of viral etiology in farm animals. Viral diseases are currently widespread, occupy a leading role in the infectious pathology of farm animals, causing enormous economic damage. Given the magnitude of animal vaccine prophylaxis, in order to increase the effectiveness of antiepizootic measures, the urgent issue i s the development of methods for the rapid and effective detection and differentiation of field and vaccine strains of the infectious rhinotracheitis virus in cattle. The possibility of using a polymerase chain reaction to identify and differentiate a vacc ine strain from epizootic strains and isolators of the cattle infectious rhinotracheitis virus is considered. In the process of research, a PCR-RFLP analysis method was developed to detect the IRT virus in the test material. The PCRRFLP analysis method was used to identify and differentiate the vaccine strain TK-A form epizootic strains and isolators of the cattle IRT virus. The principle of PCR, based on repeated repetition of DNA cycles, annealing and synthesis, which leads to an increase in the number of specific DNA fragments of the pathogen, allows you to take into account the results of PCR in an agarose gel. Analysis time is about 30 hours. The sensitivity of detecting viral DNA is 1-10 picograms (102 TCD). Due to characteristics such as relative simplicity and reaction rate, high sensitivity, specificity and reproducibility, PCR has recently become widespread in basic and applied research in various fields of biological science, including veterinary virology. The results obtained during the studies show that the use of PCR-RFLP allows to differentiate field and vaccine strains and isolates of the IRT virus with a high degree of reliability. The use of PCR -RFLP analysis increases the efficiency and informativeness of studies in the molecular epizootol ogy of cattle RTI, as it allows not only to identify the DNA of different virus strains regardless of their nature, but also to differentiate between them, including differentiating the strain TK-A used for the production of attenuated vaccines against epizootic strains and isolates of the virus.

Year of release: 2020
Number of the journal: 2(78)

New format of relations in public procurement of the Republic of Kazakhstan in connection with the pandemic COVID-19
Annotation:

In this article, the author examines the problems of legal regulation of public procurement in a state of emergency and quarantine measures. The purpose of this article is to study the changes that have appeared in the legislation of the Republic of Kazakhstan in connection with the introduction of the state of emergency and quarantine in the country. The author provides a legal assessment and analyzes the new norms of Kazakhstani legislation regulating public relations in the field of organizing public procurement. The closure of state borders, the violation of the usual, accumulated over the years, economic ties led to disruptions in the economic activities of state bodies. With all the disadvantages that took place, the positive factor was that the demand for the goods of Kazakhstani producers on the market increased. The introduced new method of public procurement using framework agreements made it possible, in turn, to ensure the guaranteed sale of products of Kazakhstani commodity producers, and also made it possible to apply import substitution of frequently purchased goods. In this article, the author, on the basis of a study of the current practice in this area, demonstrates the features of legal regulation of the sphere of public procurement in completely social new conditions with the help of novelties in legislation, and also reveals the features of the operation of legal norms regulating the sphere of public procurement of goods, works and services in conditions of a state of emergency and quarantine measures. The adoption of special measures by the Government of the Republic of Kazakhstan made it possible to transfer financial and economic relations in the state to a new format – "customer-supplier". The measures taken by the government have now been extended until the end of 2020. These measures on the part of the Government of the Republic of Kazakhstan made it possible to introduce a sparing legal regime for regulating this area for representatives of medium and small businesses, in order to minimize the losses of the latter arising against the background of the introduction of a state of emergency and quarantine measures. Taking into account the analysis of judicial practice in the consideration of cases on public procurement, the author emphasizes that in conditions of quarantine measures in Kazakhstan, as a rule, there are violations of the same type, both on the part of customers and on the part of suppliers.

Year of release: 2020
Number of the journal: 3(79)
Heading: Law

On some aspects of the project-based approach in the context of increasing the efficiency of economic development
Annotation:

The article discusses various aspects of project management, which is one of the most effective tools and allows you to skillfully take into account various factors, as a result of which the reliability of implementing successful changes and achieving goals in all types of professional activities increases. In Kazakhstan, project management dates back to the 1990s, but the real practical application of this management tool is observed at the beginning of this century. According to the authors, one of the key problems of widespread implementation and use of the project approach in the private and public sectors is the lack of information and methodological support for the development of this area. The purpose of this study is to systematize the theoretical and methodological aspects of project management in the context of improving the quality and efficiency of economic decisions. Any project is a change that is caused by the creation of innovations and the corresponding investment and other resources, on the one hand, and on the other hand, is implemented in conditions of high uncertainty and risks. The research uses the following methods: comparative analysis, a systematic approach based on which General and specific features of project management are identified, as well as abstract-logical. In the context of globalization, modern management principles require a team approach to solve problems aimed at achieving the strategic goals of companies, organizations and States, as well as ensuring continuous improvement of business processes, implementing any changes of a socio-economic, organizational or other nature. The processes that ensure an effective transition to project technologies, as well as important components of the project approach from the point of view of achieving project goals are identified. It is shown that project management is especially widely used in private companies. Currently, this tool is being actively implemented in the management system of state structures in different countries. The significance of the research results lies in the fact that knowledge about the project approach is generally recognized scientific direction, which is characterized as an independent sphere of professional activity and a system of lean management aimed at improving the economic efficiency of implemented projects. In General, despite the noticeable activation of project management promotion processes in Kazakhstan, it should be noted that an important task is to transfer modern technologies of the project approach as a tool for innovative development to all spheres of life of the Kazakh society.

Year of release: 2020
Number of the journal: 3(79)

G.A. Beshkarev in the memoirs of contemporaries
Annotation:

Gennady Beshkarevis a poet, novelist, publicist, memoirist who lived in Pavlodar for some time in the 30s of the last century. Among other things, in his creative heritage there are memoirs of artistic and historical interest "Pavlodarskiyebyli". In this work, in an artistic and journalistic form, social and everyday pictures are vividly conveyed, which significantly enrich our knowledge about pre-war Pavlodar. "Pavlodarskiyebyli" is especially valuable because earlier the 30s of the 20th century were considered as a kind of "white spot" in the Russian literature of the region. On charges of anti-Soviet activities, G. A. Beshkarev was sentenced to serve a five-year term in Siberian camps, and his work, which remained unpublished for a long time, only finds its readers in our time. The works of G.A. Beshkarev are included in the "Pavlodar literary"anthology on the study of Russian writers in Kazakhstan. In this regard, it is important to restore the portrait of the author's personality, and today the memories of his contemporaries, their written and oral evidencecan only help. This article is an attempt to systematize and analyze the data obtained as a result of the interview and can serve as a material for creating a biography of the writer. Conversations with the author's relatives, conducted in the fall of 2017 in Almaty by the author of the article, reveal the writer's personality traits, his attitude to various aspects of life: to the era, people, and creativity. In the memoirs of family members, Beshkarev appears as a person of rare directness and steadfastness, irreconcilable with the injustices of his time, as a person physically resistant, endowed with endurance. In the memory of friends, he is captured as a talented speaker, sometimes angry with the language, as clockwork, indefatigable, deeply artistic person of rare charm, who was able to impress colleagues, women, and students, as well as a teacher who is ready to selflessly and enthusiastically help students overcome difficulties.

Year of release: 2020
Number of the journal: 3(79)
Heading: Humanities

Study of the effectiveness of applied standards in railway transport
Annotation:

The article describes the results of a study of the effectiveness of the standards being implemented in railway transport. A general view of efficiency and standardization was analyzed. It was studied which document regulates the application of standardization in the Republic of Kazakhstan. Further, the international railway standard IRIS «International Railway Industry Standard» was taken as a basis, which, in turn, is based on the international standard ISO 9001. A study of the methods and types of effectiveness of standards was carried out, as well as an analysis of the applied international standard in the field of railway transport IRIS. The purpose of this standard is to create a business management system that allows for continual improvement, with an emphasis on preventing and reducing delivery defects. It is important to note that the effectiveness of standardization is evidenced by examples showing that ignoring standards turns out to be huge losses for a company for a number of reasons, for example, because its products have not been certified for compliance with a specific standard; due to the additional costs of the company for reworking products that are not manufactured in accordance with the requirements of the standards in the country of export. An analysis of the effectiveness of standardization work in the railway industry can be expressed in relative terms of the effects obtained as a result of the application of the standard: for example, in an increase in the level of safety or in economic growth. The basis for determining the actual effect is the actual level of production that existed at the given enterprise before the introduction of the standard. The measures that can be applied in order to increase the efficiency of solving the problems of developing standardization in the field of railway transport have been studied. Such standardization as one of the elements of technical regulation can provide a contribution to economic growth in excess of the corresponding indicators from the introduction of patents and licenses.

Year of release: 2020
Number of the journal: 3(79)

Mathematical modeling of the results of experimental studies of the influence of the type and dose of cheese melting salt on the qualitative indicators of melted cheeses
Annotation:

The article is devoted to the mathematical modulation of a complex of experimental data obtained in the process of experimental studies of processed cheese products, processed by mathematical methods. The purpose of this study is to establish the type and amount of the melting salt that promotes the formation of the plastic structure of the processed cheese product. The analysis of scientific research in the field of food technologies showed that mathematical modeling is used in the following areas: clarification of the modes of technological processes, design of recipes and assessment of the quality of finished products, as well as forecasting the shelf life of new products when they are put into production. The most relevant in describing the processes of food production are models of multivariate variance-regression analysis using methods of mathematical planning of the experiment. The authors carried out mathematical modeling and established graphical dependencies characterizing the degree of influence of the regulated factors X1 and X2 on the controlled ones that determine the quality and safety of processed cheese products. It is important that the mathematical analysis of the graphical dependences of the rheological parameters on the adjustable factors indicates the reliability of the data obtained. It is concluded that an increase in the melting salt dose leads to an increase in the – limit shear stress, which reflects the nature and state of the consistency of the processed cheese product. The process of normalization of the controlled factors by the maximum value was carried out. Graphical dependencies were built and regression analysis was performed, the results of which allow an objective assessment of the degree of influence of the type and dose of the melting salt on the chemical and organoleptic characteristics of the test products. The authors have proven that the optimal efficiency of transforming the structure of the constituent components of the recipe into a plastic structure of a processed cheese product that is stable during storage is provided by a combination of adjustable factors X1 (Solva 85) and X2 (Solva 120) taken in a ratio of 1: 1, with a total amount of 1,2 mas.%. At the same time, the quality indicators of the experimental products are characterized by the following values of the controlled factors: У1 – 1280 Pa; У2 – 9 points, У3 – 9,301 (2,0-2,2109 colony forming units /g).

Year of release: 2020
Number of the journal: 3(79)

Economic efficiency of the scheme for preventing infertility of dairy cows
Annotation:

The work is intended to determine the etiopathogenetic principles of animal prevention in gynecological pathology and issue a theoretical justification. At the same time, improving preventive measures aimed at preserving their health, increasing the productivity of animals in modern conditions of animal husbandry and ensuring high productivity of cows. In this regard, the main task is to develop ways to increase insemination of cows with the use of complex and homeopathic treatment. For the first time in the East Kazakhstan region, new scientific data on the main etiological factors leading to gynecological pathology and infertility of cows were obtained. Work has been carried out to improve measures aimed at preventing infertility of cows in the conditions of dairy farming in this region and stimulating increased insemination. New schemes for stimulating increased insemination using hormonal, homeopathic and other drugs have been tested. As a result, an increase in the productivity of cows was revealed, and stimulation schemes were introduced. For the first time in the farm" kamyshinskoye" an economic assessment of the damage from infertility of cows is given. Research work is done between 2016 and 2019 years by the Department of veterinary medicine of the State University named after Shakarim, in the laboratory "Agrotechnopark" of the State University named after Shakarim and national University of veterinary medicine and biotechnology named after Lviv and in the farm "kamyshinskoye" of the Shemonaikha district of East Kazakhstan region. To enhance the insemination of cows 3 groups of animals was obtained: animals of group I were not subjected to insemination; animals of group II for 1-3 hours before insemination grafted surfagon 3 ml (15 mg), 15 ml of Catosal, 15 ml habilita-Se, 10 ml uteroton; 8 days prior to insemination progesterone 2,5% 2 ml, Catosal 15 ml, habilita-Se 15 ml; cows of group III for 30-60 minutes before insemination were given Ovariovitis, and after fertilization Ovariovitis for 25-30 days and liarcine 5 ml. According to the results of drawings based on complex and homeopathic preparations, low costs were shown.

Year of release: 2020
Number of the journal: 3(79)

Development of the technology of cream bioadditive for enrichment of processed cheese product of functional orientation
Annotation:

The article is devoted to comprehensive research and development of the technology of cream supplements for the enrichment of processed cheese products. This article discusses the steady trend towards the use of dairy products with probiotic properties in the diet of modern people. The authors justify the requirements for the chemical composition and properties of a new type of processed cheese product: the mass fraction of dry processed cheese product must be at least 45 wt.%, the amount of probiotic microflora at least 107 CFU/g, to adjust the fatty acid composition of the product, the use of milk fat substitutes. As a result of the research, the composition and technological parameters of the production of a cream Supplement intended for enriching a new processed cheese product were determined. Skimmed milk powder concentrate with a mass fraction of dry substances (48.0±0.5) %was selected to increase protein (nitrogenous substances) in the nutrient medium for microorganisms. To activate the growth of bifidobacteria, the prebiotic No. 1 – lactulose was studied. The main content of the study is the analysis of the effect of increasing the amount of SOM concentrate on the chemical composition of the compositions of experimental products. The bacterial concentrates Bifilact-B and Bifilact-u were selected as the source of probiotic cultures. In fermented products, microbiological indicators were determined: the total number of lactic acid cultures and bifidobacteria. The article analyzes the dynamics of acidity of experimental products fermented with bifilact-B bacterial concentrate and bifilact-u bacterial concentrate. It was found that in experimental products with a high level of acid formation, the growth of bifidobacteria decreases, this is due to the fact that at low pH values, the growth of bifidobacteria slows down, and at a pH below 4.5 – stops. There was a significant increase in the number of bifidobacteria in the presence of a prebiotic – lactulose concentrate. The authors proved that the fermentation process with the formation of a clot in experimental products with bifilact-B bacterial concentrate is completed within 9-10 hours, taking into account the time of compaction of the consistency. In experimental products fermented with bifilact-U bacterial concentrate, the fermentation process ends within 7-8 hours, that is, by (2.0±0.5) hours faster.

Year of release: 2020
Number of the journal: 3(79)

Comparative analysis of set expressions with the zoonymic component of "dog" in English and Kazakh languages
Annotation:

ing the image of a dog. The purpose of this study is to consider the national and cultural specifics, reflected in the stable expressions of the English and Kazakh languages with the "dog" component. The article provides a brief overview of works related to the issues of phraseology in English and Kazakh. The work was based on general scientific methods: induction and deduction, analysis and synthesis. The work with the collected card index of stable expressions was carried out by the method of continuous sampling, using the descriptive-analytical method. An important place in the work with the material was given to the Вестник Инновационного Евразийского университета. 2020. № 4 ISSN 1729-536X 17 methods of definitional, contextual and typological analysis. Using the comparative-comparative method, national-specific and universal features of zoonyms in English and Kazakh languages were determined. The material of the research was a card index of phraseological units of the English and Kazakh languages (more than 160 units) which were selected using the method of continuous sampling from phraseological dictionaries of the English and Kazakh languages. When analyzing the authors of the article relied on materials from phraseological dictionaries in English and Kazakh languages. In the course of the analysis, groups of phraseological units were identified and their differences and similarities in the compared languages were identified, as well as their national and cultural specificity, based on the action of universal cultural codes; the national and cultural specificity of zoonyms is determined by a number of extralinguistic factors: the location of the country, the living conditions of the people, their customs and traditions, history, religion and socio-political structure. All this secures national-specific connotation to zoonyms and determines their productivity. The results of the study showed that through the prism of axiology, an analysis of English and Kazakh stable combinations with the "dog" component, reflecting the paradigm of values (general cultural and national-cultural) and anti-values of the corresponding ethnic communities, was presented, as well as universal values representing at the intercultural level. The results of the study showed that through the prism of axiology, the analysis reflects the paradigm of values (general cultural and national-cultural) and anti-values of the corresponding ethnic communities. The research results have both theoretical and practical significance; it will be additional material for elective courses on the subject of "Lexicology" taught at the faculties of philology and foreign languages in higher educational institutions.

Year of release:
Number of the journal:
Heading: Humanities

Design of the designershoes with the use of innovative technologies
Annotation:

The article discusses methods for creating smart things, using the example of the use of innovative technologies in the field of materials for clothing and footwear. The factors of form formation are substantiated by the example of the preferences of an individual customer who forms its image through accessories and shoes. The author considers the factors of shaping, based on the special functional features of shoes in connection with ergonomic factors. The designer is able to foresee the factor of transformability in modern footwear, changes in functional qualities, appearance, and design features of new footwear. As a result, on the basis of these transformations, to get a new emotional image and a new form. The shape of the shoe becomes a factor for transformations at the request of the customer. The article discusses the functional tasks of this shoe, plastic characteristics, technical and design tasks. As research methods, the article proposes variants of experimental models with possible stages of transformation, presents preliminary technical data, conducts a comparative analysis with innovative footwear samples of famous world designers, and makes assumptions about the development of this model in the future. An experimental method was used during the study. A shoe shape was developed, which took into account the preferences of the age group of 12-16 years old, relying on this category of consumers, we were able to go beyond the rational understanding of shoes as a functional form and gave it the meaning of a fantastic image, which allowed us to consider the form in the semantic and artistic context dictated by this age group of consumers. In addition, investing in this model the concept of "smart shoes", we considered not only the ability of modification and transformation by rearranging replaceable parts, the possibility of designing and reincarnating from one form to another, combining the constituent elements of the shoe into one whole, but also the development of the creative potential of the consumer, who at its own discretion can rebuild the structure and, in fact, as a designer itself, form a new model. The article makes assumptions about its further development in various fields of activity. For example, medicine, sports, art, etc. Considering the introduction of new materials, we relied on discoveries in the field of nanotechnology and considered among the possible features of this model the change in color on the basis, the reaction of materials to light, temperature, etc. The project is aimed at creating such shoes that will be developed for a wide range of consumers thanks to the wide range of possibilities contained in the design of the form and the features of modern materials.

Year of release:
Number of the journal:

Influence of seasonal pasture rotation on animal productivity in Zhambyl region
Annotation:

Complex research is carried out on the rational use of natural pastures with seasonal use in a specific area. The research was conducted in 2015-2017 on the lands of “Batyr” farm in Korday district of Zhambyl region. The pasture lands of the farm consists of 5 independent sites and are located in 3 geographical areas: foothill-steppe (950 hа), foothill-dry steppe (1370 hа) and foothill-semi-desert (1880 hа). The total area of distant pastures is 4.200 hectares. As a result of conducting of geobotanical researches, the farm territory of peasant farm "Batyr" in Korday district of Zhambyl region was divided into seasons (spring-summer-autumn) of their use, the yield of natural herbage and live weight gain of animals was determined. Results of accounting of productivity of natural herbages on zones, seasons of year are given in article and the gain of livemass of animals for the pasturable period is defined. When determining efficiency of sheep it is revealed that higher additional weight of a liveweight is received in experimental group of animal. The seasonal pasture on average in three years of researches at the end of the pasturable period provided an increase of a live weight of rams on 3.370 kg/head at ewes on 8.020 kg/head and lambs of birth year on 8.640 kg/head is more in comparison with control groups of animals. It should be noted that for the pasturable period the increase of alive mass of animals in experimental group in 2017 is higher than a research in comparison with previous years. In 2017 at a pasture of animals on seasonal sites it was applied intra seasonal pasture turnover at which unproductive driving of animals in search of a forage on the grazing square is practically reduced three times, besides degradation of the pasturable territory is completely excluded. It was found that the use of seasonal use of pastures provides more weight gain studied animals compared to animals that graze in one place with an unsystematic manner of grazing. The implementation of the results created the conditions for the restoration of degraded pastures with an increase in the growth and development of vegetation cover up to 15-18 % and an increase in livestock production through rational grazing up to 12 %.

Author: Zh. Issayeva
Year of release:
Number of the journal:

Morphofunctional characteristic of endocrine part of pancreas under affecting of γ-HCH
Annotation:

In the last decades of the twentieth century, in the national economy of many countries, organochlorine pesticides were most widely used, characterized by stability in the external environment, the ability to cumulate in various tissues of organisms. Lindane (the gamma isomer of hexachlorocyclohexane) is listed as a restricted persistent organic pollutant and is an ecotoxic substance with severe and chronic effects on the human body. The study of the effect of lindane on carbohydrate metabolism at the present stage is still insufficient. This fact led to the study of the effect of γ-HCH on the insulinogenic function of the pancreas in in vivo and in vitro experiments. In experiments in vivo, the animals of the experimental groups were once orally administered γ-HCH at a dose equal to 1/5 DL50. Isolated pancreatic islets, precipitated in vitro and fixed on mica plates, were exposed to γ-HCH in amounts equivalent to 1/5 to 1/4 DL50. Paraffin sections of pancreatic tissue from experimental and control animals were stained with aldehyde fuchsin according to Gomori, and tissue preparations were also examined by a highly specific method for detecting insulin in β-cells using diethylpseudoisocyanin staining, followed by examination of the preparations in the ultraviolet light of a luminescent microscope.The same methods were used to study preparations of isolated pancreatic islet tissue on the 4th day of cultivation. The influence of orally administered γ-HCH on the level of immunoreactive insulin in the blood of experimental animals was also studied. The insulin level was determined by the enzymatic-immunological method. The concentration of IRI was established before the start of the experiment and 4-4.5 hours after acute inoculation. Results and their significance. In the study of stained preparations of the pancreas of experimental animals, numerous islets of ordinary sizes were revealed, the cytoplasm of which was filled with aldehyde-fuccin granularity in quantities indistinguishable from those observed by microscopy of preparations of control animals. The value of the fluorescence coefficient in the histofluorimetric study of the control and experimental preparations did not differ significantly. However, the content of IRI in the blood serum showed a distinct decrease in the first hours after priming. In experiments in vitro, when studying the effect of γ-HCH on cultured tissue, introduced into the nutrient medium on the second day, in the field of view of the microscope, single, small pancreatic islets were revealed. Their number on a constant area of the plates was significantly lower than the value of the same indicator in the study of control preparations. Thus it has been shown that γ-HCH does not affect the histostructure of the endocrine pancreas, but causes a significant decrease in IRI in the blood serum, as well as a change in the histochemical characteristics of cultured β-cells.

Year of release:
Number of the journal:

The main directions of economic development of the region through the prism of the impact of the coronavirus pandemic
Annotation:

The COVID-19 coronavirus pandemic has brought about a new economic reality, to which every economic entity must adapt, regardless of the scale: within a region, a country, or the whole world. The article examines the regional economic mechanism in the context of the pandemic in the context of the interaction of the market mechanism of self-development and the control influence of the regional authorities. The destabilization of the economic situation in the regions as a result of the pandemic and related restrictions poses the problem of revising the main directions of regional policy To achieve the set goals and objectives, the general methods of empirical and theoretical research were used: analysis, synthesis, induction, deduction, generalization, description. Three spheres play a key role in the economy of Pavlodar region: industry, trade and transport. Just how to remain positive dynamics in terms of industrial production and maintained the services will depend on the development of the region, the main indicators which are discussed in this article through the prism of the events in the context of the pandemic. The necessary health measures taken in response to the pandemic have led to a severe reduction in mobility and are accompanied by high economic costs. The quarantine measures have had a direct impact on businesses, especially microbusinesses. To support this sector, tax incentives were provided, lending was expanded, and measures were taken to further facilitate the business environment. The article reflects only a small list of issues that required changes in the economic mechanism in the context of the pandemic and the introduction of restrictive measures, as well as the strengthening of the influence of external control on the economy. At the same time, the state as whole and individual regions, taking into account their potential and the actual situation in the economy, need to find an optimal balance between the prohibitions and restrictions imposed to ensure the safety of human health and the preservation of the economy in a functional mode, work and income of employees. This problem of finding a balance between prohibitive and permissive measures requires further analysis. At the same time, the state needs to develop and apply tools of a systematic nature, focused on the long term.

Author: Z.A. Arynova
Year of release:
Number of the journal:

Application of intelligent transport systems on the roads of Кazakhstan
Annotation:

The progress of work on the creation of an "intelligent transport system" in Kazakhstan, the development and modernization of the road industry will be reported. The economic and social effectiveness of several transport corridors and new projects were analyzed. Transport corridors of foreign countries, methods of providing logistics services were presented. In his address, the head of state paid special attention to the issues of digitalization of all spheres of life of the population, including the transport sector of Kazakhstan. Currently, the Ministry of investment and development of the Republic of Kazakhstan is working on the creation of an "intelligent transport system" within the framework of the state program «Digital Kazakhstan» (ITS). ITS goal is to systematically integrate transport infrastructure, transport devices and users with modern information and communication technologies aimed at improving the safety and efficiency of the transport process. The concept will include 11 components in ITS. One of them is a special automated measuring instruments (UAVs), which are installed in the main automobile corridors. This device is designed to measure moving vehicles without contact and eliminate unjustified stops. This year, it is planned to put into operation 10 units of RSPP, and by 2020 it is planned to increase their number to 46 units. It is also planned to introduce a traffic management system that will inform drivers about the situation on the roads, a system for forecasting and analyzing climatic conditions, which is carried out through a network of weather stations along the roads, a network of video monitoring and special video cameras for detecting traffic violations, toll road systems that cover the cost of maintenance of the national road network, etc. They will be introduced in stages until 2021. The implementation of this project will reduce road deaths, increase the volume of transit traffic and the speed of logistics services, fully cover the main highways with measuring instruments and create favorable conditions for drivers on the roads. Such systems are already operating in South Korea, Japan, Australia, Europe and the United States.

Year of release:
Number of the journal:

Research of fungal diseases of herbaceous plants exposed from Aksu Ferroalloy Plant
Annotation:

Main problem: Technogenic "metamorphosis" of vegetation near such large industrial facilities as Pavlodar is considered to be the result of various active chemical and mechanical factors provoked by economic activities associated with the influence of emissions from industrial companies. The effect of anthropogenic impacts on vegetation in all regions of Kazakhstan varies and is largely dependent on the economic development of the territory, but in any case, the end result of this impact is the change in the vegetation, causing violations of with structure, reduced vodorazdelnaya flora and productivity of communities. This, in turn, can cause infection of herbaceous plants with pathogenic fungi, which then carry with them: a decrease in the intensity of plant growth, a deterioration in their decorative qualities, a decrease in the survival of the biological species. Purpose: to study the types of fungi-pathogens of phytopathogenic diseases and to determine the degree of modification of the plant component, which is under intense negative technogenic influence from the Aksu Ferroalloy Plant (AFР). Мethods: For the experimental study, species of plants such as: Artemisia dracunculus L; Artemesia vulgaris L; Atriplex fera L; Atriplex patula L; Artemisia annua L were selected for the content of fungipathogens of phytopathogenic diseases. Results and their significance: This experimental study was aimed at the presence of fungi-pathogens of herbaceous plants as a result of human impact, occurring near the industrial zone "AFР". The composition of fungi-pathogens of herbaceous plants collected in this industrial zone was considered and studied. According to the results of an experimental laboratory study, phytopathogenic fungi of herbaceous plants belonging to 1 ordo, 1 familia, and 4 species were found.

Year of release:
Number of the journal:

Bacteriological studies of pathogenic microflora in respiratory diseases
Annotation:

The main task of microbiological study of pulmonary patients is to identify the etiology of acute and exacerbation of chronic disease in order to determine therapy and control its effectiveness. Classical methods of microbiological research consist in isolating a pure culture of the causative agent of the disease with its identification by biochemical, antigenic and other characteristics. Such studies are multistage; they impose rather strict requirements on the quality of the source material, the timing and conditions of its transportation, laboratory equipment and the precise execution of the research methodology for at least 3-5 days. Isolation of the culture of a number of pathogens (atypical intracellular microflora, anaerobic bacteria, mycobacterium tuberculosis) requires even more lengthy studies using special media and equipment. This article presents the results of a bacteriological study of pathogenic microflora in diseases of the respiratory system of the population of the Shcherbakty district of Pavlodar region for 2017-2019, including the following sequence: microscopy of native and Gram stained smears; inoculation of biological material on nutrient media for isolation and identification of the pathogen; determination of the sensitivity of the isolated microorganism to antibiotics; immunological (serological) research methods aimed at determining antigens of microbiological origin, as well as antibodies to them in the patient's body. It has been shown that conducting bacteriological studies in accordance with the requirements of regulatory documents allows obtaining reliable and comparable results necessary both for the optimal treatment of patients and for collecting and analyzing data on monitoring the emergence and spread of diseases of the respiratory system caused by pathogenic microflora.

Year of release:
Number of the journal:

Prospects for the use of natural food additives in the production of sausage products
Annotation:

Today, there is a full development of the food industry. It is characterized by the widest mechanization and automation of production and transport processes, the use of artificial cold and vacuum technology, the latest physical methods, chemical and biological preparations to accelerate technological processes. There are a huge variety of new products. New ways of long-term preservation of products in hermetic airtight packaging are promising. Now it is possible to deliver products from almost any industry to anywhere in the world. But the main problem for the modern consumer is that today's food industry is moving by leaps and bounds in the application and addition of chemical food additives: preservatives, flavors, dyes, stabilizers, antioxidants and substitutes for raw materials. To correctly answer the question of how to treat the use of food with food additives, it is necessary to understand and weigh the main disadvantages and advantages of using them. Advantages are that the product is better preserved, has an attractive appearance. Disadvantages are that the human body wears out, processing various chemicals, it is harmful to health. And with certain doses of use it becomes dangerous. Everyone has their own attitude to their health and their own priorities in life. Many people have come to terms with the daily use of products with additives, but others consciously refuse almost everything in the store. But the fact that no one wants to be poisoned from an overdose of various chemicals or starve to death. Therefore, the main advice is to carefully study the composition indicated on the label of food products and know the measure of their consumption. It is also impossible to believe blindly that the label was written with the truth. Manufacturers often use additives literally visually, which can lead to the production of a product with a dangerously higher concentration. It also happens that the manufacturer intentionally exceeds the norm in order to hide the shortcomings of the product (stale, poor quality of raw materials) and increase the yield of the finished product. The food additives added to many foods (usually designated by the code E) are predominantly harmful to the body. With moderate consumption, the use of products with E-supplements is not too harmful to the body (for example, several times a month). The situation is dangerous when a person consumes products with a large number of food additives daily or even several times a day when using various products. Nowadays, there are several hundred food additives with the code E (from E100 to E1521).

Year of release:
Number of the journal:

Influence of rhythmic gymnastics on the development of coordination abilities of young football players
Annotation:

In this regard, there is a need to search for new ways and scientific and methodological developments to rationalize methods of teaching game techniques and the development of physical qualities, such as coordination abilities, which are well developed at the initial stage of training in rhythmic gymnastics. The aim of the study was to determine the influence of rhythmic gymnastics on the development of coordination abilities in young football players aged 7-10. The main method of obtaining results in the study of motor qualities was testing. It allowed us to determine the level of functional state of the cardiovascular system, as well as the level of development of coordination abilities, namely, rhythm, plasticity, accuracy, balance and orientation in space. As a result of the experiment, the effectiveness of the developed program was revealed. The results of the study showed that the use of elements of rhythmic gymnastics bring a variety of tools to the lesson and allow the coach to fully meet the physiological requirements of this age. The rhythmic gymnastics program can be widely used in children's football institutions, as the level of coordination abilities of athletes increases in the course of training, and better conditions are provided for the formation of skills to manage their movements, that is, to act purposefully, productively, and economically.

Year of release: 2020
Number of the journal: 2(78)

Peculiarities of psychological training of military servants to actions in extreme situation
Annotation:

There are many examples of crises and catastrophes in the history of mankind. Almost the entire spectrum of natural disasters is possible in Kazakhstan. In particular, earthquakes, floods, fires in forests and steppes, snowstorms, and others. In all mountain and foothill zones, there is a danger of landslides, the threat of snow drift. In addition, there are situations that have arisen for man-made reasons. These catastrophes are the result of human activity. Such extreme situations require the concentration of all physical and psychological capabilities of a person. This is especially important for military personnel who often operate in extreme or critical conditions. Psychological readiness to solve such situations gives the individual confidence in the correctness of their own actions and, in the end, leads to a successful result. The purpose of this article is to present the results of research in the framework of a master's thesis. The main focus is on the analysis of the features of psychological training of military personnel to act in an extreme situation. The studied problem is revealed by the authors from the point of view of modern approaches to the psychological training of military personnel in a critical situation. The research methods used (analysis, generalization, experiment) allowed us to reveal the depth of the problem relevant to military psychology. The research is based on the results of modern research by Kazakh and foreign scientists. Approaches to the interpretation of the essence of the content of the concept "extreme situation" are considered, and the factors that determine the specifics of psychological training of military personnel to act in a crisis are highlighted. The concept of "psychological readiness of military personnel to work in critical (extreme) situations" is defined. Statistical results of the experiment are presented. The experimental activity carried out in the course of experimental work has a high practical significance, since it was successfully tested through the implementation of the work of the military unit 3176 "K" in Pavlodar and can be used in the psychological training of military personnel. The article is devoted to the actual problem of psychology. The results presented in the article may be useful for military psychologists.

Year of release:
Number of the journal:

Ensuring quality control by implementing a quality management system at the enterprise
Annotation:

The article presents the results of implementing a quality management system at the enterprise. The study and analysis of the international standard ISO 9001:2015, as well as sanitary and epidemiological requirements for production control were carried out. The main requirements and rules for the implementation of input, operational and output control of products at enterprises at all stages of the product life cycle were identified and presented. In addition, it was determined what requirements must be met by enterprises to implement a quality management system. It is important to note that this work is necessary at the enterprise, as it has the following advantages: by improving product quality, product sales increase, the level of management of the enterprise and personnel increases, and cost savings are realized at the stages of development, production and operation. It follows that to implement a quality management system, it is necessary to set the following tasks: describe the company's processes, develop performance criteria and evaluate processes, develop the necessary documented information, implement documentation in all departments, familiarize them with the quality policy and goals, conduct timely internal audits for further SWOT analysis, and conduct an assessment by an external auditor in order to obtain a certificate of compliance. An important step in quality management is that the organization should not eliminate nonconforming results of processes, but should identify potential nonconformities, assess the risk with the preparation of a Protocol, plan and implement actions to reduce risks. Difficulties may arise: lack of understanding by the staff of the need to implement a quality management system, lack of a clear vision, mission, lack of complete information on processes, lack of quantitative and qualitative evaluation criteria, quality is defined as the quality of products, not as the quality of processes, resources, lack of monitoring of customer satisfaction. It is possible to overcome these difficulties only with the implementation of the quality management system according to ISO 9001, since the requirements prescribed in the international standard are a real tool for improving the efficiency of the enterprise, which will help bring the organization to a higher level of development.

Year of release: 2020
Number of the journal: 2(78)

Features of teaching physics in English in secondary school
Annotation:

This article reveals the essence of teaching the disciplines of the natural science cycle in English in high school. When preparing for the lesson, there is a need for careful selection of educational material, the teacher thinks out a specific algorithm for working with the text in a foreign language using subject terminology, while not forgetting the basic grammatical and syntactic models characteristic of the English language. In such a language environment, foreign speakers actively acquire solid knowledge, eliminating language difficulties in professionally-oriented lessons. Given this problem, we decided to create a methodological guide for teachers, which will contain tasks for formative assessment in physics lessons in English. Its lexical and grammatical material meets the requirements for mastering the English language (B1) in educational and cognitive activities. The presented progress tests also meet all the requirements of the corresponding stage of training of non-native speakers and help to consolidate the skills of professionally oriented communication. The purpose is to reveal some principles that should be taken into account when preparing assignments for physics lessons in English, as well as to provide a methodological guide for teachers. This article shows several principles that are most effective when conducting lessons. All the data of the article was confirmed by a computer survey of students, the answers were analyzed and collected for publication. Given the results we have presented, secondary school teachers can improve the quality of the material provided, as well as spend less time preparing for lessons. Physics is one of the fundamental sciences that can combine both the subject content and the language component. Here we present various methods of subject-language integration to improve communication skills. Thus, the preparation and conduct of physics lessons in English requires a strict and careful selection of educational material and takes into account the educational profile of secondary school students.

Year of release:
Number of the journal:

Industry 4.0: Challenges and Opportunities for the Labor Market
Annotation:

Main problem: In the 18th century, when industrial production began, the use of steam and mechanized production caused major changes in the economy. As a result, production costs decreased along with an increase in the quantity and quality of products. During this period, production underwent a revolutionary transition from manual labor to mechanization. The potential impact of Industry 4.0 on labor markets remains an under-explored scientific field. It is estimated that Industry 4.0 will lead to unemployment by changing the employment structure and will bring new structural problems in terms of unemployment and labor relations. Purpose: The purpose of the study was to establish the impact of Industry 4.0 on the labor market and identify the consequences of the impact. Methods: studied, the evolution of production development, when mass production with electricity led to the Age of Industry 2.0, and then the emergence of the digital revolution, the use of electronics and information technology in production processes, marked the beginning of the Age of Industry 3.0. It is expected, according to international experts, scientists, that automation and robotic production will have a serious impact on the unskilled workforce and cause a critical reduction in the labor force of vulnerable sectors of society, that is, women, migrants, youth and the elderly. Results and their significance: This study assessed the possible impact of the fourth industrial revolution on labor markets. Through a literature review and analysis of emerging trends in Industry 4.0, the risks, opportunities and challenges of the process are explored in a comparative perspective. It has been established that countries must correctly perceive the transformation of labor markets and take appropriate measures. Otherwise, the applied labor-based low-cost industrialization model will lose its comparative advantage

Author: S.V. Bespalyy
Year of release:
Number of the journal:

Problems and prospects of using the Industrial certificate in the Republic of Kazakhstan
Annotation:

The Kazakhstani manufacturer has repeatedly faced situations when pseudo-enterprises, disguising themselves as domestic producers of goods, works and services, received preferences and used government support measures, won government and other purchases, while not having enough equipment for production. The article is devoted to current problems and prospects for the application of the Industrial Certificate in the Republic of Kazakhstan. The dynamics of the development of the sphere of public procurement of the Republic of Kazakhstan is considered, depending on the specific requirements for certain areas of production of goods, works and services. The material in this article is important from the point of view of ensuring fair competition between competing enterprises in the same industry. The complex of transformations in the system of standardization, certification and quality management has been carried out since the first years of independence of the Republic of Kazakhstan. These transformations have been observed over the years, vivid examples of which are: the application of the European model of technical regulation to the modern realities of the economic situation in the Republic of Kazakhstan, accession to the Customs Union, the adoption of unified technical regulations of the Customs Union, the introduction of new regulations and legal acts defining the share of local content in products and services, as well as the potential of domestic industries. The results of these transformations have proved that the system of technical regulation of the Republic of Kazakhstan is an effective tool for the development of the economy. The development of new Kazakhstani normative legal acts and normative documents introduced to support the domestic producer of goods and services will contribute to the transformation of the old system and the creation of a new one that is fundamentally different from the previous one. The article discusses problematic issues in the field of industrial certification, namely: a lack of qualified personnel; unregulated pricing system for work carried out in this area; the complexity of the industrial certification procedure; a lack of automation of processes of the industrial certification mechanism. Analyzing the practice of industrial certification, this article offers recommendations for solving the above problematic issues. New edition of amendments and additions to the «Rules for the formation and maintenance of the register of domestic manufacturers of goods, works and services, as well as the issuance of an Industrial certificate» approved by the decision of the Presidium of the National Chamber of Entrepreneurs of the Republic of Kazakhstan «Atameken» dated 28.12.2018. No. 28 is designed to reconstruct the process of obtaining the Industrial Certificate. The process should become more transparent, understandable and highly efficient. Also, with the introduction of changes, the problems that hindered the receipt of the Industrial certificate by individual enterprises should be resolved.

Year of release:
Number of the journal:

Improving the technology of fruit and vegetable semi-finished products with natural aromatic and spicy additives
Annotation:

The sharp deterioration of the environmental situation in the Republic of Kazakhstan, associated with human activity and the impact of harmful factors on the environment, affected the quality of food consumed by insufficient consumption of domestic fruit and vegetable products containing vitamins, minerals of an alkaline nature, carbohydrates, vegetable proteins, pectin substances and active fiber. The problem of improving the quality of growing and processing fruits and vegetables is one of the main tasks of the food independence of the Republic of Kazakhstan. Currently, the share of large vegetable farms in the Republic of Kazakhstan is only 10%. The volume of industrial processing of fruit and vegetable crops in Kazakhstan is insignificant. The demand for domestic fruit and vegetable products in the country is met only by 35-40%, most of it is imported from countries such as Russia, Kyrgyzstan, Uzbekistan and China. There is a need for the development of organic vegetable growing in Kazakhstan and the creation of new types of domestic fruit and vegetable products containing a sufficient amount of useful and active substances that can bind and remove toxic substances and radioactive elements from the human body. The purpose of the work is to improve the technology of fruit and vegetable semi-finished products with natural spicy and aromatic additives, to develop a multi-component recipe for vegetable mixtures and a method for producing quick-frozen vegetable mixtures with high quality indicators. These studies were aimed at studying the chemical composition and functional and technological properties of vegetables and spicy - aromatic plants for the content of biogenic compounds: carbohydrates, proteins, vitamins, essential oils, minerals and other substances. The structure of plant tissues was studied and the mass fraction of moisture, dry matter, fiber, mono - and disaccharides, pectin substances, vitamin C was determined, the formulation and production technology of Assorted vegetable mixtures were developed, and quality indicators were determined.

Year of release:
Number of the journal:

Risks of microbiological contamination of fruits and vegetables used for food
Annotation:

Fruits and vegetables are most often consumed without being thoroughly processed before consumption. Some plant foods are vacuum-packed to ensure long shelf life as well as preserving the quality and safety of the product. Fruits and vegetables carry naturally occurring non-pathogenic epiphytic microflora on their surfaces. During growth, harvesting, transport and further handling they can be repeatedly contaminated by pathogens from human or animal sources. Fresh fruit crops have been implicated in a number of documented foodborne disease outbreaks. Outbreaks of diseases caused by bacteria, viruses and parasites have been epidemiologically linked to the consumption of a wide range of fruits and vegetables. The aim of our study is to assess the risk of contamination in fruit and berry crops and how to address this long-standing problem, namely, contamination of fruit and vegetables with unnatural pathogenic microflora. The following fruit and berry crops common in Turkestan region were chosen for the experiment: Apple variety Suislepskoe (stolovka) , peach variety Nectarine and grape variety Kishmish. Bacteriological inoculation was carried out by membrane filtration of used sterile water to obtain flushes from the surface of fruit crops. All work was carried out under full aseptic conditions. The utensils, water and other equipment used in the work were sterilised in advance. The data obtained during the experiment shows that there is a potential for widespread contamination of uncharacteristic microflora of plant products. Based on the results of the study it can be concluded that there are yeasts and acetic acid bacteria on the surface of all three samples of fruit and berry crops, which can be universally contaminated food and are not the natural microflora for the above mentioned crops. Specifically, fruits and vegetables can be contaminated with various bacterial pathogens, including Salmonella, Shigella, E. Coli O157:H7, Listeria monocytogenes and Campylobacter.

Year of release:
Number of the journal:

Creating a development plan for students of a children's and youth football school
Annotation:

This scientific and practical article is devoted to the analysis of the results of an experiment aimed at psychological and pedagogical support of the process of building a project for the development of the inner world of a player of a children's and youth football team of the professional football club "Lviv" from the Ukrainian city of Lviv. A special feature of the psychological and pedagogical support for designing the development of the student's psyche is the use of the paradigm of the language of the theory of activity in the version of the Moscow methodological and pedagogical circle (MMPC), using the language of schematic images and the pyramid of subjectivity, explaining the path of formation of human mental mechanisms in the unity of cognitive, emotive and conative processes, starting from the vital level of their development to the level of spirituality. Another feature of the article is that the presentation of methods and techniques does not occur in a separate part of it, but in the process of describing the steps of designing a development plan that is formed for absolutely all professional athletes who have the acmeological potential of professionalization in football. It is presented in the form of 11 steps to create an individual trajectory of the player's development. In each of these steps, it is important that the coaches and the player participate with their parents, representatives of the club, which has its own component in terms of the volume and quality of the efforts required on their part. The article reveals the first of the 4 steps of creating a reasonable player development plan. For example, we consider working with one of the players. The content of this particular illustration is a very illustrative and demonstrative example. It is assumed that a series of articles in this publication will reveal the topic of student development management, which will include both scientific and theoretical and review types of works. The next article will be a continuation of this one in terms of demonstrating the success of implementing this particular development plan by the example of several players from a team consisting of 22 players who have been trained in a similar way, i.e. using methodological criteria for the organization of psychological and pedagogical support for the development of thinking, sensory-motivational and volitional characteristics of players by football club coaches.

Author: S.A. Chekin
Year of release:
Number of the journal:

Development and research of means and methods for improving the efficiency of heat stations in the Republic of Kazakhstan
Annotation:

The main problem: This article is devoted to the key problems of the fuel and energy complex of the Republic of Kazakhstan: 1) lack of production capacity to meet the growing demand for energy and fuel from the economy and the population. Increased demand for electricity and heat, which will require the commissioning of new generating capacities.There is already a shortage in the fuel markets. Modernization and bringing the existing oil refineries (hereinafter referred to as refineries) to full capacity will not allow providing the domestic market until 2030; 2) the export orientation of raw materials, the dependence of the economy on the export of energy resources. In order to attract technology and investment in the oil and gas and nuclear industries, agreements on the extraction of energy resources were concluded with international export companies. In the medium term, Kazakhstan may face a shortage of oil for domestic refineries, if measures are not taken to stimulate its refining within the country. The uranium mined is fully exported; 3) high energy intensity of the economy, low level of energy efficiency. There is a high potential for increasing the efficiency of energy use both in the electric power industry and fuel production, and at the level of final consumption – in industry and housing and communal services; 4) decrease in the replenishment and quality of the resource base in the oil and gas, coal and nuclear industries; 5) low environmental friendliness of technologies used in the fuel and energy complex. Purpose: The purpose of the article is to reveal the problem in the field of ensuring the fulfillment of international obligations between different countries and their own energy sufficiency by gradually changing the structure of energy production. Methods: Studying the experience of increasing the efficiency of the use of energy resources and energy saving as a priority of the state policy of the country. Analysis of production capacity with a constantly forecasted shortage of primary energy resources and insufficient growth of capacity for the production of electricity and heat. Consideration of the possibility of compensating for the shortage by saving energy resources, increasing tariffs for energy carriers, as a stimulating factor for their effective use. Results and their significance: The results of this article will reflect the problems of energy, as the most important driving force of global economic progress. The well-being of the people depends on the state of the country's energy sector, therefore there is an urgent need to solve the emerging problems. The global energy problem is, first of all, the issue of stable and efficient supply of fuel and energy to mankind. Today, the energy sector of Kazakhstan is focused on fuel resources, since the country is provided with hydrocarbons and other energy resources. About 72 % of electricity in Kazakhstan is generated from coal, 12,3 % from hydro resources, 10,6 % from gas and 4,9 % from oil. Thus, the four main types of power plants generate 99,8 % of electricity, while alternative sources account for less than 0,2 %.

Year of release:
Number of the journal:

Investigation of the dependences of the rheology of calcium alginate solutions on concentration, temperature and shear rate
Annotation:

The main problem: The rheological properties of calcium salts are of theoretical and practical interest for a modern researcher. The theoretical interest is primarily related to the search for general patterns and manifestations of the rheological properties of solutions of calcium salts. The practical component is based on the search for patterns and dependencies of the properties of solutions on the structure and composition of the object of study. Such chemicals as calcium salts are of particular practical interest, they are widely used in various fields, such as the food, chemical and pharmacological industries. Hydrophilic high-molecular solutions of alginates, namely calcium alginate, are actively used in the preparation of soft dosage forms, the manufacture of jelly masses in confectionery, act as thickeners in the food industry. They are characterized by a fairly high percentage of viscosity at low concentrations, bioavailability, prolonging effect, absence of irritating properties, biocompatibility with many polymers, which is especially important in the pharmaceutical industry and medicine. The use of calcium salts for these purposes is currently very promising, since these organic salts have a number of unique properties associated with gelation. Purpose: This paper contains the results of studying the features of the rheology of calcium alginate solutions. A concentration range of 0.1-0.7 % was chosen for the studies, which is sufficient to avoid gelation at room temperature. The dependence of viscosity on concentration, temperature (in the range of 25-45 °C) and shear rate were studied. Methods: Analysis of theoretical sources, observation, comparison of results. The rheological characteristics of the obtained substances were studied using a capillary viscometer. The measurements were carried out in the temperature range of 25-45°C. Results and their significance: it was found that there is a significant dependence of viscosity on concentration and temperature. For concentrations of 0.3 – 0.7 %, a similar type of dependence is observed, in contrast to solutions with a concentration of 0.1 % . Explanations of these dependencies were proposed.

Year of release:
Number of the journal:

Development of a technology for producing organic fertilizers based on catalytic processes
Annotation:

The article is devoted to the development of a technology for obtaining organic fertilizers from poultry waste based on biocatalytic processes. Currently, many poultry farms have become sources of environmental pollution, thereby causing serious environmental problems and economic and social damage. The problem of reliable protection of the natural environment from pollution by bird droppings is currently relevant. In the area of operation of large poultry farms, air pollution by microorganisms, dust, foul-smelling organic compounds, which are decomposition products of organic waste, as well as nitrogen, sulfur, and carbon oxides, is possible. Bird droppings contain acids, nitrogen, phosphorus and potassium, heavy metals. The content of nitrogen, phosphorus and potassium changes dramatically depending on the quantity and quality of the feed. Humic substances isolated from brown coal have a sufficiently high sorption activity and are used as cheap sorbents for solving a number of environmental problems in industry. These studies are aimed at minimizing the main disadvantage of the anaerobic digestion process, the low reaction rate, which leads to the need to create large-volume bioreactors. On the basis of the research carried out, a technology has been developed for obtaining organic fertilizers from poultry waste by the method of anaerobic fermentation of chicken manure with humidity at a temperature of 27 °C - 50 °C with the addition of sodium humate. The resulting fertilizer is intended for use in agricultural production, horticulture, floriculture, forestry, municipalities, in household plots in order to increase the yield and quality of crop production. For the developed technology, an application has been submitted for obtaining a Patent for the invention of the Republic of Kazakhstan «Method for producing organic fertilizers» (priority No. 2021-22818, dated July 13, 2021). The invention allows to significantly reduce the time of fermentation, to enrich the product with organic and mineral products contained in sodium humate, to convert the salts of heavy metals into an insoluble state, to improve the environmental friendliness of the method.

Year of release: 2021
Number of the journal: 4(84)

Efficiency of using Artemia salina as part of a feed additive for chickens
Annotation:

Main problem: The development of the genetic potential of poultry, as well as the receipt of high-quality eggs for collection or further incubation, are possible only if rational and correct feeding of the broodstock and, more importantly, the young during its rearing period is observed. During this period, high-quality protein nutrition occupies an important place, which determines the level of productivity, stable growth, reproductive ability of the bird, as well as the state of health during the feeding period. Protein deficiency always remains an urgent problem for agricultural land, whose main activity is aimed at breeding dairy and meat animals. In this regard, research in the field of finding the use of non-traditional protein feed is of great need. If we summarize the modern achievements in the field of protein and aminoacid nutrition of poultry, we can find the most profitable way to obtain feed additives in industrial production. The studies, the results of which will be described in this article, are aimed at studying the possibility, experimental substantiation of the optimal dosage and the effectiveness of using the feed additive from crustaceans Artemia salina in the diets of chickens of the egg-meat direction of productivity [1]. Purpose: To study the possibility, experimental substantiation of the optimal dosage and the effectiveness of the use of the feed additive from crustaceans Artemia salina in the diet of chickens of the egg-meat direction of productivity. Methods: Analysis and generalization of theoretical information Results and their significance: This article presents the results of the analysis and generalization of theoretical material. The theoretical significance is determined by the fact that it is invested in scientific and practical problems related directly to solving urgent problems, increasing the efficiency, competitiveness and quality of domestic poultry products.

Year of release: 2021
Number of the journal: 4(84)

Comparative evaluation of different extraction methods of medical plants
Annotation:

The development of extraction techniques of medical plants aims to maximize the bioactive compounds production. Тechnologies in this area of industry have not high enough еfficiency factor. In some cases, it reaches only 40-50 %. Therefore, development of new methods to effectively extract different compounds from plant material and their input into large-scale industry is of great importance. The goal is to determine an effective and suitable technology for extracting bioactive compounds from medical plant. This is a narrative review paper which focuses on different extraction methods of medical plant. To find relevant articles for this narrative review, 73 articles were reviewed. Of these, 14 irrelevant documents were discarded. This review analyses various extraction processes to guide the selection of suitable methods for various types of medical plants and applications. This is done by outlining traditional and modern methods of extraction techniques, exploring the importance of solvents for extraction, and comparing novel and alternative methods of extraction. In conclusion, based on the current knowledge, solvent extraction is the most common method for medical plants extraction. Enzymatic hydrolysis and supercritical extraction are advanced techniques with high yield of compounds. However, more research is needed for some modern extraction methods.

Year of release: 2021
Number of the journal: 4(84)

The role of the tax passport in assessing the tax potential of the region
Annotation:

The tax system, as an integral area of the economic direction of state policy, urgently requires such construction and development that will be directly related to those main vectors of the state policy of socio-economic development, which will help ensure a sufficient amount of tax revenues to the budgets of different levels. In many countries around the world, the COVID-19 pandemic has led to a significant deterioration in the state of public finances. Containment measures, increased government spending, and reduced tax revenues have led to an increase in the budget deficit and public debt, which as a percentage of GDP has reached its highest level in several decades. Restoring public finances is a priority for all countries for many years to come. At present, in the Republic of Kazakhstan, it became necessary to develop a single document, the basis of which should be a system of indicators that determine the trends in the development of the macroeconomic situation in the region, as well as the influence of sectoral and regional factors of the current structure of financial flows on the state of the tax base and the prospects for its development. Purpose of the article is a substantiation of the role of the tax passport in assessing the tax potential of the region in modern conditions. The tax passport of the region should be considered as a document that allows assessing the existing tax base of the region, the level of the tax burden in the context of certain types of taxes in dynamics, by industry, as well as developing a forecast for the receipt of taxes and fees for the future, both under the current legislation and taking into account its possible change. When writing the article, the dialectical method of cognition, the methods of scientific generalization and classification, the method of systemic and comparative analysis were used. The introduction of tax passports will mean the beginning of a qualitatively new system of tax collection, corresponding to market conditions and the scale of the revival of the economy, that will contribute to a change in the tasks of the tax service (there is a need to predict the volume of tax revenues in the medium term, develop new concepts in the field of taxation that contribute to the development of business without prejudice social programs, substantiation of tax programs to ensure protectionist policy in the field of foreign economic activity).

Year of release: 2022
Number of the journal: 1(85)

Ensuring water quality as the main goal of preserving human health
Annotation:

Main problem: The article analyzes water quality assurance as the main goal of preserving human health. The study of chemical and microbiological parameters of wastewater and drinking water was carried out using generally accepted standards. The number of deaths associated with the use of contaminated drinking water, according to WHO, tripled in 2021 and reached almost 19 thousand against 6 thousand in 2020. In addition, the number of neoplasms, diseases of the genitourinary system, digestive organs and skin increased by 2 %, to 1.486 million. The reasons for the increase in the level of harmful chemicals and microbiological pollutants in the water are outdated sewage treatment plants, old pipes and disinfection with chlorine. Purpose: Study of the quality of wastewater and drinking water in Pavlodar, study of the quality of wastewater and drinking water in Pavlodar. Methods: Sampling of wastewater, chemical and bacteriological analysis of wastewater and drinking water, statistical method, correlation analysis of experimentally obtained results and calculated characteristics, etc. Results and their significance: In the field of public health risk, pollution of reservoirs that are sources of household drinking water supply and recreational water use, the continuing necessary high deterioration of water supply networks, their accident rate, as a result of low level of operation, failures in the operation of treatment facilities. Hygienic assessment of reservoirs according to complex indicators indicates the continuing high degree of water pollution in places of water use. The water quality indicators of the surface reservoirs of the region remain low in terms of sanitary and chemical (primarily organoleptic and general sanitary), as well as microbiological indicators. According to toxicological indicators, the level of water pollution in places of water use is estimated as moderate. The main pollutants of the Irtysh River in Pavlodar are industrial enterprises and housing and communal facilities that discharge untreated or insufficiently treated wastewater into reservoirs. A complex of causes of drinking water pollution has been identified: high deterioration of water supply networks, their accident rate, because of a low level of operation, failures in the operation of treatment facilities, unfair treatment of industrial wastewater by industrial enterprises of Pavlodar, etc. Priority preventive directions for improving the quality of water as a source of life are the implementation of long-term targeted planning of measures for the modernization of water supply and sewerage networks and facilities in Pavlodar. The state of water supply necessary and measures to improve it should be constantly monitored and considered at meetings of sanitary and anti-epidemic commissions.

Year of release: 2022
Number of the journal: 1(85)

Simulation of the working cycle of a diesel engine with a system of periodic shutdown of the cylinders
Annotation:

Combustion engines operate over a wide range of power and speed. To the greatest extent, this applies to automotive and tractor engines and diesel engines operating at fractional and idle loads for a significant part of the operating time. When designing engines, the choice of their main design and layout parameters is carried out in a comprehensive manner, taking into account the provision of the required power and efficiency in the modes of maximum torque and rated power. However, ensuring the economical operation of modern highly accelerated diesel engines at low loads and idling causes a whole range of problems related mainly to the organization of effective mixture formation and fuel burnout, as well as to ensuring stable fuel supply. Thus, the cycle dose of injected fuel in idle mode is 8–12 times less than the cycle dose in nominal mode, which determines increased requirements for fuel equipment and difficulties in ensuring high-quality mixture formation. At the same time, diesel engines operate in idle mode up to 50 % of the total operating time, consuming up to 15–20% of the fuel. For truck engines, the relative idle time is approximately 20–25 %. Thus, the development of measures to improve the efficiency of diesel engines at idle is relevant. The purpose is to perform a numerical analysis of the effect of switching off cycles in diesel engines for autotractor and diesel locomotive purposes on the working processes in the cylinder and the indicator parameters of the cycle in idle modes. When writing the article, traditional methods (comparison, description, and measurement), generallogical methods and research techniques (analysis, generalization, etc.) were used. A numerical analysis of the operating cycle of a diesel engine equipped with a cycle shutdown system was performed. The relationship between changes in fuel injection characteristics when cycles are turned off with indicator indicators of the engine operating cycle in idle load modes is disclosed. It has been established that the expediency of switching off cycles in a specific engine operation mode is determined primarily by the features of the injection, carburetion and fuel burnout processes.

Year of release: 2022
Number of the journal: 1(85)

The analysis of the avermectin group drugs efficiency in the cattle dehelmentization
Annotation:

The variety of species and forms of parasites of agricultural animals and the features of their life cycles are the basic foundation for the production of different types and medical forms of antiparasite medicine. In the treatment of the parasitic diseases of agricultural animals, one of the main factors is that the veterinary doctors have the knowledge on the mechanics, efficiency and the safety for humans and environment of the medicine being used. Taking into account high pathogenicity and resistance of parasitic organisms and their ability to adapt to effect of medicine, it is crucial to permanently monitor the efficiency of the applied anthelmintic drugs, including the new drugs offered by veterinary services. This article will describe the results of the research on pharmacodynamic and pharmacokinetic parameters of «Ivermectinum», «Ivermec», «Aversect-1», «Аvrsect-2», «Аivin» drugs and their methods of application with the consideration of terms of maintenance and immune status of cattle herds in Mayconyr village (Irtysh district, Pavlodar region). A comparative analysis of efficiency of the above mentioned drugs in dehelmintization and treatment of cattle was conducted with the results provided. The recommendations and the restrictions on use of the drugs were determined considering the farm condition. The experimental research of the aforementioned broad-spectrum drugs was conducted strictly following the rules of asepsis and instructions on application. The total number of replacement heifers subjected to the dehelmintization under the method of analogues is 150 units. Anthelmintic treatment was conducted two times a year - in springtime (March-April) before pasturage, and fall time (September-October) before confining the cattle in the stable. Coprological study on intestinal helminthes of the examined cattle was conducted in Irtysh RVL of the Pavlodar regional branch of RVE RVL VCaSC MA RK by ovoscopical, flotation and larvoscopical methods. There is a comparative analysis on the efficiency of avermectin group antiparasitic drugs applied twice a year for cattle dehelmintization. The recommendations on the use of the aforementioned drugs for dehelmentization and prevention of parasitic diseases are provided and the requirements for the use were determined.

Year of release: 2022
Number of the journal: 1(85)

About the use of CASE-technologies in the process of designing information systems
Annotation:

Main problem: Today electronic information is one of the important resources in the management system. Electronic information resources are not only means, but also control flows. For example, any instruction or instruction in the management system is actually a guide to action. At the same time, for example, data on the movement of an object (employees, goods, money, etc.) are information resources, the storage and accounting of which is the basis of the organizational process. Large flows of information require their structuring, and operations on them become time-consuming. One of the ways to solve this problem is the development and implementation of an information system. Purpose: To analyze and design an information system using specialized tools designed to optimize the implementation of the above stages of software system development, using the example of a real business process. Methods: The article discusses the methodologies of CASE tools designed to automate software development processes, namely, the first two stages of the life cycle: analysis and design of a software product. The analysis and design of the business process functionality is carried out using the IDEF0 functional modeling methodology. The design of the database structure of the information system was carried out using the methodology of semantic (information) modeling IDEF1X. Description of the scenario of the designed software for a real business process is carried out using the dynamic modeling methodology IDEF3. Results and their significance: The article substantiates the relevance of the use of modern CASE-technologies in the process of analyzing and designing a future information system, as well as for the purpose of possible optimization on the example of a real business process "Inventory accounting". As a result, a comprehensive business process model was built using tools based on CASE-methodologies. The resulting model, as well as the description of its construction, is a clear example of the use of CASE technologies for software developers, as well as system analysts and IT specialists.

Author: I.I. Lyashenko
Year of release: 2022
Number of the journal: 2(86)

The use of a heat pump at an industrial enterprise in the region
Annotation:

Main problem: The use of waste heat is most often solved by installing heat exchangers, but this is not effective when the temperature of this heat does not exceed 10-15 0 C, in which case this heat can be used using a heat pump. Where can I get this heat? Almost any enterprise needs cooling of any equipment elements or substances – working fluids; the heat received from them can be sent to a heat pump and used here at the enterprise. Purpose: Consideration of the possibility of using the heat of cooling water from the pump CNS 60-165 and the proposal of a new scheme with the installation of a heat pump that uses this heat. Methods: This is achieved due to the fact that it is proposed not to discard the heat, but after its use in the heat pump evaporator, transfer it to the heated medium - water, which is then sent to the shower cabins of the enterprise. Since the showers are located in the same room, the cost of transporting heat and losses will be minimal. Methods: In the course of the research, the possibility of using the waste heat of an industrial enterprise for using it here at the enterprise for the purposes of hot water supply was considered. For these purposes, it is proposed to install a heat pump, thanks to which the thermal potential increases, which makes it possible to fully use the received heat. Results and their significance: As the experience of foreign countries has shown, heat pumps can be widely used in many industrial enterprises, and in conditions of increased competitiveness, in order to reduce energy costs and the cost of manufactured products, install heat pumps to utilize excess heat, for example, process water, which is available in many production allows you to have a significant economic effect.

Year of release: 2022
Number of the journal: 2(86)

Results of application of organomineral fertilizer obtained with biocatalytic processes
Annotation:

Main problem: Bird droppings and animal manure contain acids, nitrogen, phosphorus and potassium, heavy metals. The content of nitrogen, phosphorus and potassium changes dramatically depending on the quantity and quality of the feed. Purpose: To study the effectiveness of the use of organomineral fertilizer from poultry waste, obtained using biocatalytic processes on the growth and development of plants. Methods: An application for a Patent for the invention of the Republic of Kazakhstan "Method of obtaining organic fertilizer" has been submitted for the developed technology for obtaining organic-mineral fertilizer. In the soil intended for growing seedlings of tomatoes of the “Pepper-shaped Orange” variety and peppers of the “Bogatyr” variety, the resulting fertilizer was applied in the amount of 1 kg per 1 m2 of soil, which was dug to a depth of 8-10 cm and used to grow seedlings in closed ground and subsequent for planting it in open ground. Soil without fertilization was used as a control. The process of soil preparation for open ground, intended for planting seedlings, was carried out for the experimental field with the introduction and control without fertilization. Experimental and control studies were carried out under equivalent climatic conditions, the scheme and technology of watering plants. In total, 100 bushes of each plant species were used in the experiment. Results and their significance: The use of the obtained organomineral fertilizer allows to increase the yield of vegetable crops (tomatoes, peppers) by 20-25% compared to the control. In addition, in the experimental samples, an increase in the number of fruits on a bush was noted with an increase in their size, a decrease in the growing season and the number of damaged fruits.

Year of release: 2022
Number of the journal: 2(86)

Analysis of the problems of the procedure for issuing an Industrial Certificate in the Republic of Kazakhstan and ways to solve them
Annotation:

Main problem: It is very important for each company to obtain an industrial certificate, which makes it possible to get into the Register of Domestic Manufacturers, as they expect to receive large orders. With the receipt of an industrial certificate, their prospects for participation in various tenders and purchases will significantly increase, where they can show their abilities, compete with domestic producers, and also have an advantage over importers. Since July 1, 2019, the industrial certificate has become mandatory for participation in public procurement. Corresponding changes to the rules for public procurement were made by the Ministry of Finance of the Republic of Kazakhstan. Taking into account the experience of the «Rules for determining the country of origin of goods, issuing a certificate of origin of goods and canceling its validity», approved by Order of the Acting Minister for Investment and Development of the Republic of Kazakhstan dated February 24, 2015. No. 155», it becomes clear that the document does not take into account a number of «narrow» specifics of individual industries. Purpose: development of amendments and additions to the «Rules for the formation and maintenance of the register of domestic producers of goods, works and services, as well as the issuance of an Industrial Certificate» for the subsequent possibility of obtaining an Industrial Certificate by a chemical industry enterprise for the production of mineral fertilizers. Methods: study and analysis of literary sources, statistics and modeling of the procedure for issuing an Industrial Certificate. Results and their significance: the problems of application were studied, ways to solve these problems were found, and amendments and additions to the “Rules for the formation and maintenance of the register of domestic producers of goods, works and services, as well as the issuance of an industrial certificate” were developed. At the moment, the Rules need to be carefully finalized. It is necessary to consider this issue together with authorized state bodies, associations and business representatives, since obtaining an Industrial Certificate will directly affect participation in public procurement, and, accordingly, the economy of the Republic of Kazakhstan.

Year of release:
Number of the journal:

Improving the means and methods for the prevention and treatment of postpartum paresis of cows
Annotation:

In modern conditions, the problem of the incidence of cows with high productivity in the postpartum period is relevant. It is these animals that are more susceptible to various diseases, primarily due to violations of the technology of keeping and feeding, weak body resistance, heavy loads during fruiting and milk production. It is known that as a result of various metabolic disorders, calving of cows in farms proceeds with various deviations. The lack of calcium in the blood due to hormonal disorders leads to hypocalcemia and paresis after calving, which is often the cause of death of animals. Therefore, the improvement of prevention schemes and treatment of puerperal paresis in cows is very relevant. Purpose of the article – Improvement of preventive and therapeutic measures for postpartum paresis in cows on the basis of the Tassu farm in Akmola district. The work was carried out under production conditions on a livestock farm in the Akmola region, in the farm "Tassu" in the spring and summer. The object of the study were black-motley cows with a pregnancy period of 250-260 days. 22 animals were selected in the experimental group, 12 animals in the control group. The average weight of animals is 567 ± 34.5 kg, age 5-6 years. The cows of the experimental group received injections of the drug Karsulen, which included: 2 % Cardus marianus D3, 1 % Sulfur D6 and 1 % Arsenycum album D6. Karsulen was administered to cows intramuscularly or subcutaneously at the rate of 1 ml per 100 kg of animal weight, the dose volume should not be less than 5 ml per animal. In the postpartum period, in the complex therapy of postpartum paresis in cows, Karsulen is used intramuscularly or subcutaneously 1-2 times a day. The use of the drug Karsulen with the composition: 1 % Cardus marianus D3, 1 % Sulfur D6 and 1 % Arsenycum album D6 has a regulatory effect on protein, carbohydrate, fat metabolism, restores impaired function of the gastrointestinal tract, liver and kidneys.

Year of release:
Number of the journal:

Analysis of the epizootic situation of canine distemper among dogs in the city of Tula
Annotation:

Main problem: At present, service, decorative and hunting dog breeding is intensively developing in Russia and in the Tula region. So, in 2020, 119 high-breed puppies were registered in the Book of Pedigree Breeding, and in 2021 already 164 puppies, mostly decorative and service breeds. Thus, the number of pedigreed dogs susceptible to various infectious diseases is increasing annually. Canine distemper is one of the most widespread viral diseases of dogs all over the world, including in Russia. Analyzing the "Patient Admission Logs" of veterinary clinics in the city of Tula, it was found that 44 % of dogs that fell ill with diseases of infectious etiology were diagnosed with canine distemper. Purpose: The aim of our research was to study the epizootological features of the course of canine distemper among dogs in the Tula region of Russia. To achieve the intended goal, it was necessary to solve the following problem: to analyze the breed and age factors for the incidence of canine distemper. Methods: Analysis of data from private veterinary clinics reporting on the incidence of small domestic animals was used. Results and their significance: As a result of studying the epizootic situation of canine distemper among dogs, the following data were obtained: The disease is observed throughout the year and has the character of undamped fluctuations subject to sharp seasonal changes. The maximum number of diseased dogs in all years of observation is recorded in March - 6.2 cases per 1000 individuals. It has been established that among the infectious diseases of dogs, distemper occupies the first place, and there is an annual increase in the number of dogs with distemper.

Year of release:
Number of the journal:

From the history of public administration in Kazakhstan during the period of "war communism"
Annotation:

The article examines the emergence and functioning of the Soviet institutions of power in Kazakhstan during the period of "war communism". On the basis of archival materials and published works, the author analyzes the activities of Soviets and revolutionary committees. The purpose of the article is to study the main trends and features of the development of local government in Kazakhstan in 1918-1921. The study is based on the principles of historical, scientific objectivity and systemic structural-functional analysis. For this reason, the author used such methods as the method of historical reconstruction for the reorganization of the administration of Soviet, party and other local bodies; the method of isolation for the study of local (regional) features in relation to local phenomena and processes in the energy sector; the method of typology, which made it possible to identify and describe different types of local authorities. The authors come to the conclusion that in 1918-1921, during the period of civil resistance, "war communism" and the beginning of the Chamber of Commerce and Industry, bodies of the new Soviet power appeared and operated in Kazakhstan. They are characterized as having an anti-democratic character; strict social orientation; alienation of indigenous peoples; immanent nature for creating conflict situations; choosing non-optimal ways and means of solving a problem situation; unification of party and state. As a result, an overgrown and clumsy class of party classification was formed, which was not provided for by the Constitution of the USSR.

Year of release: 2022
Number of the journal: 4(88)
Heading: Humanities

Specifics of management in tourism of Pavlodar region
Annotation:

Main problem: for the 2019-2021 years of the implementation of the state program, the indicator for the number of incoming visitors in the tourism sector of the region was achieved in 2019. In 2020-2021, the indicator was not reached due to the global pandemic associated with the spread of coronavirus infection by Covid-19, and therefore the attractiveness and profitability of tourism in Kazakhstan decreased. Tourism and the increasing demand for tourism services every year are becoming a source of large incomes and profits in many countries. According to the World Travel and Tourism Council (WTTC), travel and tourism is currently the largest industry in the world, taking into account the contribution to global GDP and employment. [1] The conclusions made in this paper and practical recommendations can contribute to the development of measures to improve the process of effective management and reform of the tourism industry. The purpose: to study the theoretical and practical aspects of the development of the tourism industry in the Pavlodar region. Methods: in the course of the research, the following methods were used: theoretical analysis of literature, methods of ranking, analysis, grouping and systematization of data, statistical methods. Results and their value: currently, the tourism industry of both Kazakhstan and its regions is gradually beginning to develop. The article presents the result of assessing the attractiveness of the tourism market and shows ways to expand the industry, as well as reveals the specifics of management in the tourism sector. The formulated conclusions and practical recommendations can contribute to the development of measures to improve the process of effective management and reform of the tourism industry of Pavlodar region, as well as the development of a mechanism for using tourism potential in the socio-economic development of Kazakhstan. This study is relevant, since the main task for today is the need to study the problems and challenges in the field of tourism development, which will contribute to the development of other related industries in the Republic of Kazakhstan. The development and solution of the problems of the tourism industry itself will undoubtedly lead to an increase in the opportunities of this market and the demand for services and, as a result, will affect the development of economic indicators of both regions and the whole of Kazakhstan.

Year of release: 2022
Number of the journal: 4(88)

Energy savings through the use of refractory masonry with a lower thermal conductivity
Annotation:

Main problem: recently, much attention has been paid to energy saving in production, especially when it comes to industrial units that burn fuel. There are several ways to maximize the use of the heat released during the combustion process, for example, to reduce the temperature of the flue gases at the outlet of the unit, by maximizing its use, both in the technological process itself and by installing additional heat-receiving units, for example, air heaters or other heaters. Another way to save money is to reduce heat losses through the lining of these high-temperature units. Metallurgical units that consume a large amount of energy and fuel require an analysis of their consumption, and ways to save their consumption based on the results of the analysis. Purpose: this article considers the possibility of replacing the existing inner insulation layer of the second and third sections of a high-temperature unit - a metallurgical furnace, with a new one with better technical and economic indicators. Methods: the possibility of replacing the existing inner insulation layer of the second and third sections of the high-temperature unit with a new one, with the best technical and economic indicators, was considered. The calculation of heat losses by thermal conductivity through the side surfaces and the roof with new insulation was performed, and the economic efficiency of the proposed solution was proved. Results and their significance: replacing the existing inner layer of insulation - refractory concrete PHLOCAST M30 (thermal conductivity coefficient from 1,4 to 1,45) with the proposed CERALIT GUN HK 70070 (thermal conductivity coefficient from 1,03 to 1,12) will reduce heat loss to the environment, and thus to reduce fuel consumption for the furnace.

Author: А.P. Plevako
Year of release: 2022
Number of the journal: 4(88)

Obtaining an effective biological instrument and method of reproducing lumpy skin disease
Annotation:

The production of vaccine preparations before release requires standardization of their immunobiological parameters, especially safety and immunogenic efficacy. An indicator of the immunogenic effectiveness of the lumpy skin disease vaccine is the resistance of vaccinated cattle against the virulent virus. However, according to preliminary studies, the virulent control virus did not always cause clinical disease with characteristic symptoms when infected subcutaneously. The purpose is to develop a biological model in the form of a complex consisting of a pathogenic virus, a method of infection and a susceptible animal to assess the immunogenicity of a lumpy skin disease vaccine. Local cattle, intact from lumpy dermatitis, were used to reproduce lumpy dermatitis and develop the causative agent of the disease. As the initial infectious virus, we used a 20 % tissue suspension of nodules (skin nodules) obtained from cattle that fell ill with lumpy dermatitis in the field in the Atyrau region in 2016. As a viral mass to control immunogenicity, a 20 % suspension of skin nodules and edematous skin tissue at the site of the pathogen injection, obtained after the “refreshment” of the virus in animals, were used. The disease was reproduced by infection with the test suspension of the virus intradermally, subcutaneously, intravenously at a dose of 0.5 cm3 and titration on the skin of the animal. The effectiveness of the biological model was assessed by morbidity, severity of the course and severity of the manifestation of the disease. During primary intradermal infection with a field isolate of the virus, the disease manifested itself in one of three animals in the form of hyperthermia, depression, lacrimation, and the appearance of several nodular nodules in the skin of animals. The refreshed tissue virus caused clinical disease both in subcutaneous, intradermal and intravenous infection. But the clinical signs of the disease were more pronounced with intradermal inoculation of the virus, and with intravenous inoculation, it manifested itself in a more severe form with a fatal outcome. Inoculation of the virus intradermally into different areas of the skin led to the development of an independent skin lesion in each infected point in the form of painful edema, followed by necrosis, the size and intensity of which depended on the dose of the injected virus. This development of skin pathology made it possible to work out a method for determining the virus titer in vivo. The tissue virus obtained from the edematous tissue at the site of the pathogen injection was guaranteed to cause clinical disease in cattle during intradermal inoculation and made it possible to evaluate the immunogenic efficacy of the produced batches of vaccine against lumpy dermatitis.

Year of release: 2022
Number of the journal: 4(88)

The prevalence and effectiveness of the treatment of edemagenosis in sika deer in the Ussuri urban district
Annotation:

The degree of dаmаge to deer by the lаrvаe of Oedemаgenа tаrаndi of the Hypodermаtidаe fаmily depends on the number of femаles of the subcutаneous gаdfly in the summer. For the development of meаsures to combаt deer gаdflies, vаrious methods hаve been tested over the yeаrs, аmong them methods of wаtering аnd externаl locаl аpplicаtion. For this purpose, mаny reseаrchers tested dipterex (80 %), crystаlline chlorophos (97 %) in the form of аn 8 % solution, tiguvon, ricifon, dioxаfos, sulfidophos-20 аnd ectopor (2 % cypermethrin) аnd other drugs. Vаrbeks 35 %, Bаytex-50, Fenthion-50, Nаtаsol аnd Etаcid, etc. were tested intrаmusculаrly in vаrious doses on deer. The purpose is to study the prevаlence аnd effectiveness of the treаtment of edemаgenosis in sikа deer in the Ussuriysk urbаn district. The reseаrch wаs cаrried out аt the deer fаrm "Borisovskаyа". For the experiment, three groups of deer were formed with 6 heаds eаch. In order to study the therаpeutic аnd prophylаctic efficаcy of the two groups of drugs Аversect-2 аnd Dectomаx, the аnimаls of the first experimentаl group were injected with the drug Аversect-2 subcutаneously аt the rаte of 1 ml per 50 kg of аnimаl weight, deer of the second experimentаl group were injected subcutаneously with Dectomаx аt а dose of 0.2 mg per 1 kg of mаss, which corresponds to 1 ml of solution per 50 kg of mаss. The prepаrаtions were аdministered immediаtely аfter the end of the summer of gаdflies (end of July-beginning of Аugust). The third group of deer did not receive drugs, аnd it remаined the control group. The incidence of sikа deer entomosis in the Ussuriysk urbаn district for three yeаrs wаs quite high аnd remаined аt the sаme level for аlmost the entire period (43.21-48.8), with а slight decreаse in 2021 to 37.4 %, which wаs most likely due to the climаtic conditions of this period. Of the two selected drugs with seemingly the sаme spectrum of аction, the best results were obtаined on the deer of the second experimentаl group, where the drug "Dektomаx" wаs used, while the EI wаs significаntly (two times) lower thаn in the first experimentаl group аnd аmounted to 16.7 % versus 33. 3 %, аnd АI - 0.03, аgаinst 0.83.

Year of release: 2022
Number of the journal: 4(88)

Carrying out the demercurization of heavy metals (mercury) using the Denite immobilizer and its effect on the soil
Annotation:

On the territory of the Northern industrial zone of Pavlodar in the area of the industrial wastewater reservoir «Bylkyldak» in some areas of the earth there is soil contamination with mercury, exceeding the MPC for mercury (2.1 mg/kg) by 500 times. The total mass of mercury dispersed in the surface layer of soils is 2.8 tons. The mass of contaminated soil is approximately 208,000 tons. Pollution of the territory is historical. The purpose of the article is to determine the efficiency of chemical binding (immobilization) of mercury in the soil with the Japanese drug Denite® in real field conditions of the territory of mercury contamination in the Northern industrial zone of Pavlodar using an experimental study; to determine the stability of insoluble mercury compounds formed by the preparation at extreme winter and summer temperatures and seasonal fluctuations in open ground. Soil samples were taken for the study at 11 points in the centers of mercury pollution. Laboratory studies were carried out in an accredited analytical laboratory of the Testing Center of JSC Caustic. Soil samples were treated with Denite®, the preparations obtained were stabilized, and water extracts were prepared. The content of mercury in soils, extracts from them, and plants was determined by the atomic absorption method on a RA-915+ spectrometer equipped with RP-91 and RP-91S attachments. As a result of research, the effectiveness of Denite® in the chemical binding of mercury in the soil has been proven and its optimal dosages have been determined. As a result of the positive tests of the technology of chemical immobilization of mercury, the prospect of a practical solution to the issue of demercurization of mercury-contaminated soil on the territory of the Northern industrial zone appeared.

Year of release:
Number of the journal:

Mathematical modeling of experimental data in the design of formulas for dairy products
Annotation:

Main problem: the article is devoted to the issue of designing basic recipes for dairy products using mathematical modeling methods. The author analyzed the problems in the field of food technology and concluded that mathematical modeling is used in the following areas: clarification of technological process modes, designing recipes and assessing the quality of finished products, as well as predicting the shelf life of new products when they are put into production. The use of dihydroquercetin as a drug that prevents the oxidation of milk fat in the design of dairy products is substantiated. Mathematical modeling was carried out on the basis of experimental and analytical material obtained in laboratory and production conditions. Based on the maximum value of the objective functions, the optimal normalized mixtures and the maximum allowable concentration of dihydroquercetin were selected. The analysis of the received mathematical dependences and models is carried out, the system of linear equations is made. Purpose: to study the effect of natural bioflavonoid antioxidant on the oxidative processes of milk fat and the viability of lactic acid cultures and their associations by mathematical modeling in order to use it in the technology of a new product; conduct an analysis of mathematical dependencies and models, compose a system of linear equations. Methods: the article uses the method of mathematical analysis and the matrix method. Results and their significance: a mathematical model was developed for the dependence of the viability of probiotic cultures on the mass fraction of dihydroquercetin when designing recipes for a creamy-protein curd product, a matrix of the chemical composition of dairy ingredients was presented, and a system of linear equations for basic recipes was compiled. In the course of the study, the spatial configurations of dihydroquercetin, as well as its effect on the oxidative processes of milk fat, were studied. Mathematical modeling of experimental data on the study of the effect of dihydroquercetin on the viability of microorganisms with probiotic properties was carried out. The normalization of the complex of obtained results on the study of the influence of the mass fraction of dihydroquercetin on the fermentation process was studied. Controlled factors characterizing the process of fermentation of model media with dihydroquercetin have been determined. A rationing of the dihydroquercetin complex of more than 0.50% was established; the target function decreases to its minimum value of 0.53 with a mass fraction of dihydroquercetin of 1.00%.

Year of release:
Number of the journal:

Fermented milk and vegetable "Products for live"
Annotation:

In the dairy market of Kazakhstan, the demand for mass-produced dairy products is decreasing and expanding to innovative fermented milk products for functional nutrition. The main feature of the new technology is multicomponent formulations, which include the main raw materials and biocorrectors, ensuring their high biological and nutritional value. New dessert products are prepared on a dairy or protein basis using vegetable ingredients, fermented with strains of dry starter cultures of direct application or immobilized starter culture Bifimm probio. The purpose is to apply immobilized living cells of pure cultures of lacto- and bifidobacteria as a biocatalyst for the fermentation of dairy-vegetable media. During the study, the method of immobilization of microbial cells in biopolymer gels was used. The most effective method is the inclusion of cells in an aqueous solution of biopolymers with a concentration of 25 %. For immobilization, pure cultures of lactic acid and bifidobacteria were selected in the gel as part of the concentrates "BK-Altai-LS Bifi", "Poleznaya Partiya", "Genesis", "Narine", "Bio-yogurt Vivo", and the main prescription ingredients were selected: milk with a mass fraction of fat of 1 %, 2.5 %, 3.2 %, natural grain additives, jams, juices, nuts. Formulations, technological schemes and production methods, prototypes were developed, quality and safety indicators were determined. Studies have shown the effectiveness of immobilized starter cultures in the formation of fermented dessert products. Out of 20 prototypes with the best indicators, 5 samples were selected, in which the optimal ratio of milk, probio Bifimm starter cultures and biocorrectors averaged 70:20:10. The quality and safety analysis showed that new fermented milk products using immobilized starter cultures have a positive effect of more than -70 % compared to direct-use starter cultures, have functional properties and can be used for healthy nutrition in Kazakhstan.

Author: T.A. Nazarenko
Year of release:
Number of the journal:

Analysis of mechanisms of regulation of innovation activity in the system of global competitiveness
Annotation:

Main problem: rapidly changing trends in development of economies of countries require a rational approach to state regulation of innovative activity and investments directed to organization of real sector of the economy. At the same time, for analysis of modern state policy in the system of innovative development, it is necessary to assess the effectiveness of state regulation mechanisms of innovative activity in the economy of the Republic of Kazakhstan. Purpose: to assess mechanisms of state regulation of innovative activity in the Republic of Kazakhstan in the global competitiveness system. Methods: synthesis, content analysis, accommodation, monographic method, factor analysis, economic and statistical research method. Results and their significance: the assessment of the mechanisms of state regulation of innovative activity in the Republic of Kazakhstan in the global competitiveness system allowed to fully assessing effectiveness of mechanisms of state regulation of innovative activity in the economy. Examining the sub-indices of international rating of the World Economic Forum for 2021-2022 in relation to 2017-2018, the authors came to conclusion that in Kazakhstan today there is the decrease in all the sub-indices of rating and their factors (“basic requirements” and “business complexity”), with exception of “innovation” sub-index. This sub-index was significantly reduced due to a sharp deterioration in macroeconomic environment, which is directly related, according to the authors, to significant losses in oil export revenues. This, in turn, affected the deterioration of the state budget indicators. The article pays special attention to place and role of state regulation of innovative activity in the socio-economic policy of the country. Organizational and methodological problems in development and implementation of innovative policy in the Republic of Kazakhstan are researched in detail, which makes it necessary to solve them in order to achieve the effectiveness of innovative policy at the regional and national levels.

Year of release:
Number of the journal:

Promising directions in the use of retort packaging for the production of canned food products in Kazakhstan
Annotation:

The article is devoted to the study of the main types of retort packaging, as well as polymer and combined materials used for its manufacture. The authors have compiled a classification of retort packaging presented on the modern market, investigated the technological properties of packaging materials, and also determined the requirements for modern retort packaging: resistance to sterilization at a temperature of at least 120°C, steam and moisture resistance, chemical inertia to canned products, tightness, low gas permeability. It has been established that in order to give the retort packaging the required properties, it is made of multilayer polymer or combined materials, each of the layers of which performs certain functions. It is determined that due to the barrier properties of polymer and combined materials with respect to oxygen, retort packaging provides shelf life of canned products up to 5 years, which allows the use of retort packaging made of polymer and combined materials as an alternative to glass and metal packaging. In experimental studies, the composition of the outer layers of modern retort packaging was analyzed and it was concluded that polypropylene or polyethylene terephthalate are most often used, since these polymer materials are thermally and chemically resistant, vapor- and moisture-proof. It is established that materials that are barriers to gases are used as the middle layer – aluminum foil, metallized films, ethylene vinyl alcohol, polyamide. It is proved that polymer co-extrusion, multilayer injection molding or lamination is used for the manufacture of such materials and packaging. The data obtained indicate the high barrier properties of combined packaging materials, therefore, the thermal and chemical stability of the polymer and combined materials used makes it possible to use retort packaging for packing almost all groups of canned products.

Year of release:
Number of the journal:

Experience in team computer game development
Annotation:

The article discusses the experience of developing a computer video game by a team of students of the Department of Information Technology of the Innovative University of Eurasia within the 48-hour competition «48h Game Making Challenge» for creating video games, held in Pavlodar on October 27-29, 2022 in the IT-Hub building of the College of Information Technologies (93 Lermontov St.). Basic information about the event and a link to the registration form were published on the Instagram @digital_drive14 social network page and on the website https://digitaldrive.kz /. 8 teams from different educational institutions of Pavlodar participated in the competition. The purpose of the article is to comprehend the practical experience of developing a computer game. The team chose the Unity game engine as the environment and the main tool for developing a computer game. The Unity program is a popular development environment for interactive 2D and 3D content. The engine is completely free for the average user. The Unity engine was also chosen because it is multifunctional and uses a component-oriented approach, in which the developer creates objects and adds various components to them. The advantage of the engine was also the presence of a huge library of assets and plugins, with which you can significantly speed up the game development process. The graphics of the game were made in Photoshop. The music and sounds were taken from free sources. InEU team developed a computer game «Conqueror of the Moon» and became the winner of the contest «48 Hour Game Making Challenge Pavlodar 2022». During the development of the game, the team first chose the engine, developed the plot and concept of the game, created an image for the level and menu. Then the programmer developed the mechanics of the game, wrote code for control, time, dialogues, messages. The designers drew the environment, background, characters, created all the animations for the game and found music for the background of the menu and the game itself.

Year of release:
Number of the journal:

The results of the analysis of testing sunflower interlinear hybrids in the conditions of the East Kazakhstan region
Annotation:

Increasing the yield of sunflower is inextricably linked with the evaluation of newly created interline hybrids and their components (parental forms) using various methods for assessing their combination ability (CА). Breeding research in this direction includes large material and practical costs when using the developed methods for assessing combination ability (CА) due to its small analytical capabilities. New approaches to the analysis of the productivity of hybrids in practical studies can significantly increase the volume of the analyzed material and evaluate not only for a short period of testing, but also for a long period of time over the years. Purpose is determination of the combination ability of parental forms of sunflower interlinear hybrids to optimize the breeding process. When analyzing the determination of the combination ability of the parental components of sunflower interlinear hybrids, the method of evaluating the CА according to a special scale developed at VNIIMK (Krasnodar, Russia) was used. This method makes it possible to analyze a large number of hybrid combinations and their parental forms and draw appropriate conclusions for further use in the breeding process. The analysis of the obtained results makes it possible to fully evaluate the obtained interline hybrid combinations by years of testing. We analyzed 1736 hybrid combinations involving 212 maternal forms and 1472 combinations involving 209 paternal pollen fertility restorer lines. 75 maternal lines with a high total combination ability (GCА) and 97 paternal forms with this trait were identified. Maternal lines with high combinational ability VKU 110 A, VKU 140 A and SV 55 A are of interest for use in practical breeding. Among the paternal forms are SV 123 V, VKU 400 V and VKU 401 V. The components of hybrid combinations with high specific combination ability (SCА) have been determined. These are lines VKU 414 A, VKU 413 A, SV 31 Rf, SP 1459. Hybrids with high adaptive properties have been identified when growing conditions change, which will make it possible to purposefully conduct practical breeding to maintain high productivity of sunflower hybrids

Year of release:
Number of the journal:

Pedagogical Conditions for Creative Self-realisation of Students in Fine Arts
Annotation:

Main problem: the issue of self-actualisation of schoolchildren is one of the most urgent problems of pedagogical science, aimed at investigating and comprehending the contradictory processes of development, training and education of schoolchildren’s personality in modern socio-cultural conditions. Thus, one of the tasks of the secondary school and the teacher is to create optimal conditions for the development of adolescents’ personality abilities for self-realisation. Purpose: is to reveal the optimal pedagogical conditions that promote the process of development of teenagers’ personality abilities to self-realization. Methods: the task of the research cintains the study and experimental verification of a certain set of conditions which contribute to the self-realisation of students in the process of fine arts lessons at a comprehensive school. Results and their significance: organizational forms of conducting classes for the formation of abilities to creative self-actualisation are defined. It is shown that the most important pedagogical conditions for the self-realization of the teenagers’ personality are the combination of individual and collective organization of learning at the fine arts lessons and the wide use of the problem-based method of teaching.

Year of release: 2023
Number of the journal: 3(91)

Development of technological parameters for gluten-free pasta production
Annotation:

The article is devoted to the development of technological parameters for the production of gluten-free pasta, as well as to the study of the influence of physico-chemical factors on the formation of the structure and organoleptic parameters of gluten-free pasta. The authors studied modern approaches to the production of gluten-free food in Kazakhstan. During the study, the main types of raw materials used in the production of gluten-free pasta of functional orientation were identified. For the production of a new product, a reasonable choice of raw materials and functional ingredients was carried out, the formulation and production technology were developed, all temperature and time modes were described, physico-chemical, organoleptic parameters of the new product were studied, a production flowchart was developed. The purpose of the article is to develop the technology of gluten-free pasta enriched on the basis of corn, rice flour and meeting the requirements for specialized food products, with the addition of functional and flavoring ingredients to expand the range of gluten-free products in the Republic of Kazakhstan. In experimental studies, the formula of a new gluten-free paste based on rice and corn flour with the addition of flaxseed flour, soy protein isolate «EdimCo», xanthan gum, dietary fiber (psyllium), Supermak booster was developed. The complex results of organoleptic and physico-chemical parameters of whole-grain flour for the production of new gluten-free pasta are presented. The results of organoleptic and physico-chemical indicators, as well as safety indicators of finished gluten-free pasta are presented. The article presents the technological parameters and time modes of the production process of fresh pasta, including the following basic operations: preparation of raw materials at t = 10 0C, kneading pasta dough at t = 40-45 0C, vacuuming at 40-10 kPa, pressing (extrusion) at 7 min, 10-12 MPa, drying and stabilization at 10-12 MPa, cooling of dried products t = 20-25 0C 4 hours, packaging of finished products at t = 35 0C and relative humidity 70 %.

Year of release: 2023
Number of the journal: 3(91)

Phytopathological Assessment of Sunflower Genetic Resources in Relation to Vegetative Conditions in the East Kazakhstan Region during 2021-2023
Annotation:

Phytopathological Assessment of Sunflower Genetic Resources in Relation to Vegetative Conditions in the East Kazakhstan Region during 2021-2023

Year of release: 2023
Number of the journal: 3(91)

Expansion of Communication Contact Between the State, Business and Society in the Republic of Kazakhstan
Annotation:

Main problem: digital transformation of Kazakhstan’s society leads to emergence of new communication business models, including the so-called proactive data-based service, which implies expansion of communication contact between the state, business and society. Digital transformation of economic sectors and the service sector has objectively caused discussion of issues related to various aspects of its implementation. These include digitalization of society spheres within framework of public administration [1], problems of interaction between business and government [2], mechanisms of interaction between subjects in the private-public partnership model of government and business [3], description of communication models of business types, government and public sector [4], history of emergence of electronic trade, its forms and types of goods delivery to a consumer [5], organizational and managerial relations and processes arising in enterprises, working in field of online marketing and e-commerce [6]. In Kazakhstan, digitalization of spheres and the economy sectors is one of strategic priorities of its development. Use of information and communication technologies in the service sector creates additional impulses to its dynamics, therefore, has impact on improving population’s life quality. In this regard, it is necessary to identify trends and patterns of communication interaction between the state, business and society, to consider and clarify their content. The purpose: the research of state and trends in the development of Kazakhstan service sector under the influence of digital solutions and expansion of communicative contact between the state, business and society. Methods: the performed analysis in the research is based on the materials of the statistical reviews and their analysis using the methods of grouping, generalization, logical analysis, system description and interpretation. Results and their value: a range of the key problems of communication interaction between the state, business and society is investigated and determined. Recommendations are proposed to accelerate the development of e-commerce in Kazakhstan as a tool for communication interaction between business and society and improving population’s life quality.

Year of release:
Number of the journal:

Development of Technology for the Production of Meat Products of the "Halal" Category for Functional Nutrition
Annotation:

The article is devoted to the development of technology for meat products of the "Halal" category. The authors consider the main problems of the meat industry in the field of the development of meat products of the "Halal" category in accordance with the National Program "Development of meat farming for 2018-2027", as well as the peculiarities of the production of meat products of the "Halal" category in Kazakhstan. A technology for the production of sausages for frying of the "Halal" category based on minced turkey and beef meat for functional nutrition has been developed, organoleptic, physico-chemical parameters of the new product have been studied. The mass fraction of protein is 8 %, the mass fraction of fat is 7 %. The authors of the article have developed a technological scheme for the production of a new product of the "Halal" category, which includes: acceptance of raw materials, cutting, deboning, veining, grinding to 2-3 mm of meat raw materials. At the next stage, meat is cooked at t 2-4 0C for 12 hours, minced meat is prepared (adding jerusalem artichoke 3 %, adding vitamin premix "Rovifarin" in an amount of 1.0 %, as well as spices and garlic according to the developed recipe). At the next stage, the minced meat is stuffed into natural shells with a diameter of (32-44) mm, cooled at t (4 + 2) 0C, stored at t (4 + 2) 0C for 36 hours. During the microstructural study of a sample of boiled and smoked sausage produced using traditional technology, it was found that the mass of the sample was formed from large fragments of muscle, fat and connective tissue (0.7-1.4) microns. The layout of the structural elements of the minced meat is dense, vacuoles and microcapillaries are rounded in shape, sometimes without clear boundaries, merged, with a size of (60-300) microns.

Year of release:
Number of the journal:

Evaluation of Mechanisms’ Effectiveness of State Regulation of Innovative Activity
Annotation:

Main problem: Rapidly changing trends in development of economies of countries require a rational approach to state regulation of innovative activity and investments directed to organization of real sector of the economy. At the same time, for analysis of modern state policy in the system of innovative development, it is necessary to assess the effectiveness of state regulation mechanisms of innovative activity in the economy of the Republic of Kazakhstan. Purpose: to assess mechanisms of state regulation of innovative activity in the Republic of Kazakhstan in the global competitiveness system. Methods: synthesis, content analysis, accommodation, monographic method, factor analysis, economic and statistical research method. Results and their significance: The assessment of the mechanisms of state regulation of innovative activity in the Republic of Kazakhstan in the global competitiveness system allowed to fully assess effectiveness of mechanisms of state regulation of innovative activity in the economy. Examining the sub-indices of international rating of the World Economic Forum for 2021-2022 in relation to 2017-2018, the authors came to conclusion that in Kazakhstan today there is the decrease in all the sub-indices of rating and their factors (“basic requirements” and “business complexity”), with exception of “innovation” sub-index. This sub-index was significantly reduced due to a sharp deterioration in macroeconomic environment, which is directly related, according to the authors, to significant losses in oil export revenues. This, in turn, affected the deterioration of the state budget indicators. The article pays special attention to place and role of state regulation of innovative activity in the socio-economic policy of the country. Organizational and methodological problems in development and implementation of innovative policy in the Republic of Kazakhstan are researched in detail, which makes it necessary to solve them in order to achieve the effectiveness of innovative policy at the regional and national levels.

Author: Buka S.A.
Year of release: 2024
Number of the journal: 1(93)