The development of the oil refinery is directly related to the peculiarities of the socioeconomic environment, which is determined largely by the favorable conditions of activity of all branches of economy of the Republic of Kazakhstan, a stable regulatory processes of all normative -legal framework of implementation of market reforms and efficiency of making management and innovative solutions in the oil refining industry of the Republic of Kazakhstan. Currently, a lot of efforts are being made to scale modernization of all production processes, as well as modernization of equipment of the oil refining complex of the country

In the article the results of an analytical assessment of economic capacity of Pavlodar city are considered. Determination of internal reserves of socio-economic development of the region currently becomes an important task solution of which requires development of new approaches to definition of essence, structures, methods of an assessment of social and economic potential. The size of social and economic capacity of the region characterizes a level of development of productive forces, defines competitiveness and extent of capitalization of the enterprises.

The financial model of estimation small and medium sized enterprises bankruptcy risk is made on the basis of the fuzzy set method.

The article provides the analysis of the existing heatinsulating materials and the experience of using modern heatinsulating materials for a thermal protection of power boilers.

The methodological approach based on comparison of these statistical regions of Republic of Kazakhstan is considered in this article. The comparative analysis of basic indexes of socio-economic development of the Pavlodar area is Given.

The universal model of product and wealth of the region reproduction is presented in the article where matrices of goods and services production and distribution (with the separation of product flows produced in the region and imported) and matrices of fixed and financial assets are given that are used in production and other economics areas.

This article discusses the possibility and practice of Kazakhstani enterprises producing chemical products and raw materials, which are oriented to export regulations REACH, adopted by the European Union that will greatly increase the safety and competitiveness of domestic production.

This article discusses some of the problems of chemical safety, such as the recycling of waste production, chemical accidents and disasters, environmental pollution and the negative effect of the chemical industry on human health, as well as methods for safer handling of chemical products.

In this article it is considered a compliance assessment of developing industrial sectors of the country to the principles of «green» economy based on the example of the petrochemical complex of the Republic of Kazakhstan. Relevance of the research is caused by the need to build «green» low-carbon economy. The implementation of «green» economy concept will be a strong incentive for technological renovation for the numbers of industries. The directions of the «green» economy in the petrochemical industry of the Republic of Kazakhstan have been determined, as well as an analysis of international experience to implement the principles of «green» economy in the petrochemical industry has been carried out.

The main aspects of the industrial policy of Pavlodar region are considered in the article. The principles and prerequisites for the implementation of industrial policy in the region are presented in the article. To accelerate development of the regional economy based on introduction of innovative technologies, problems solution and directions of industrial policy improvement are offered.

The method of integral transformations is used to study the process of bodies heating and cooling. As a result of theoretical calculations the regime of soil freezing depending on the ambient temperature was established. Laplace transformation is practically used to determing patterns temperature of constructed concrete dams, building grounds

The article describes the results of an analytical assessment of innovative potential of Pavlodar region. Now in terms of the investment attractiveness of the country, it becomes an important task of forming a competitive domestic reserves of socio-economic development of the region, the solution of which requires the development of innovative management solutions. Innovations embodied in the new scientific knowledge, products, technologies, services, equipment, training of personnel, organization of production, is a major competitive factor in all economically developed countries. In the face of fierce competition inherent in a market economy, the innovative development of enterprises has become a key tool for ensuring sustainable long-term development

The questions of development of highways of Republic of Kazakhstan are considered in this article. The analysis of modern development of highways status is conducted. Including influence of development of highways on the economy of region. The ways of perfection of development of highways offer

This article deals with the theoretical aspects of demographic policy of Kazakhstan, as well as analysis of the problem and the demographic situation in the Republic of Kazakhstan. Also it studies target of demographic policy and government measures to improve the demographic situation in the country. There is another reserve; it is those people who live in other countries are similar in many respects to the Kazakh people, and who want to live in Kazakhstan. Today it is especially important to make the new apartments available to the population and reduce the cost of their cost. In connection with the transformation of the republic into a huge construction site of the construction industry should be developed intensively

This article discusses the use of ash and slag waste such as ash or slag boilers and thermal power plants of Pavlodar region. We describe the main source of energy today. Produced by laboratory analysis of the composition of the ash. A basic installation for the processing of the ash. It presents the possibility of using fly ash in building materials industry.

In this article we consider some fractional-irrational expressions and prove the assertion that reduce them to fractional-rational expressions and also consider one general lower-and-upper bound (two-sided estimate) for one numerical series.

The article focuses on the key issues of the socio-economic development and formulates the problems hindering its development on the base of materials of Bayanaul region.

The article deals with the geometric interpretation of complex numbers, the possibilities of applying a transformation of the plane, and examples of solving problems.

In the article different methods of diagnosis of failures of electric equipment which are most often found in the industry today. The classification of methods for diagnosing motor failures is presented, and the advantages and disadvantages of existing methods for diagnosing failures in electric equipment are revealed. Based on the description of the methods of diagnosing electric equipment failures, a comparative table was compiled. Analyzing the comparative table of methods for diagnosing failures of electric equipment, the most current method for diagnosing the technical condition of the electric motor was determined.

In this article, social-and-economic position of Sherbakty district of the Pavlodar region is considered. Dominant industry of economy of district is agriculture. Data are presented on the amount of operating private business entities. Complex description of socio-economic results of development of region is reflected in SWOTanalysis, strengths and weaknesses of development of district, threat and possibility are considered. The assessment of tourist cluster is highlighted for development of district and a necessity is certain for development of the strategic program of development rural territories.

In this article, the main directions and measures of the state support of monotowns in Kazakhstan aimed at providing their sustainable development are considered. The urgency of the topic is substantiated by the fact that there is intensification of negative socioeconomic tendencies in the majority of monotowns. Authors have specified concept of the monotown, their classification and typological characteristics are considered. Consider the statement by the Government of the Republic of Kazakhstan single-industry towns development program, its basic concepts and elements. Also consider tools monocities diversification of the economy, the use of them in order to create conditions for the achievement of a stable socio-economic situation.

To improve soil water regime and moisture supply of plants, moisture-swelling polymeric materials are used in the form of hydrogels, which, upon contact with water, rapidly absorb and retain it for a long time in its volume. However, widespread of such hydrogels used in plant growing is currently limited by its high cost. In this connection, from the economic point of view, the use of composite materials as soil conditioners is of great importance, including inexpensive natural raw materials in its composition while maintaining high rates of moisture sorption and water retention. The task is to improve the mixture to maintain the soil balance of various agricultural crops by changing the quantitative ratio of components, significantly cheaper the composition, improving its quality indicators. The purpose of the scientific article is the mixture for maintaining the soil balance of various agricultural crops, which contains an active product based on a granulated hydrogel and a targeted additive.

This article reveals the possibility of solving life situations with combinatorial coefficients and shows the practicality of applying formulas on the theory of probability and mathematical statistics. The solution of tasks with combinatorial coefficients consists mainly in the decomposition of these coefficients by the basic formulas and their manipulations.

This article is devoted to the consideration of methods for receiving copper powder. The main methods of obtaining copper based on them are analyzed, the possibility of complex extraction of the investigated metal from spent solutions (wastes) of electrolytic production of copper.

The article considers modern healthcare as a social institution representing a wide system of private and state enterprises. It is pointed out the need to study the theoretical and practical features of management in healthcare, conditioned by the need to develop conceptual approaches to communication between managers and specialists in the medical services industry at various levels of management.

The article considers ways of solving the problem of increasing the efficiency of agriculture in the North of Kazakhstan and preventing the deteriorating basis for the development of this important branch of the country. It is proposed to change the concept of agro-industrial complex management in the region as a whole.

The article describes a new method of using enzymatic rice in confectionery production. The article points to the actual continuity of expanding the assortment in the confectionery industry with the use of enzymatic rice.

Gellants are food additives used to increase the dencity and create a certain structure of the food product. In the dairy industry, there is an active work at developing new technologies for fermented milk products, which allows improving organoleptic quality indicators with the use of gellants. In this article, an analysis of the assortment of gellants used in the dairy industry was analyzed.

The article emphasizes the importance of carrying out breeding work with Kazakh horses of the zhabe type, which are of great importance for the productive horse breeding industry. The results of selection experiments on improving breeding and productive qualities are presented on the example of the Kazakh zhabe horses of Seletiinsky factory type at a stud farm "Altai Karpik Saydaly-Sartoka" of the Irtysh district of the Pavlodar region.

This article considers chemical safety as a system of measures aimed at protecting vital human interests against adverse chemical effect from threats of processing, storing and destroying hazardous chemicals. Chemical safety is ensured by a complex of legal, organizational, financial, material and informational measures intended for prevention and elimination of real and potential security risk, mitigation of their consequences.

This article describes the ways in which students can develop logical thinking skills. Currently, any form of the exam takes precedence over logic. Accordingly, the article grouped logical tasks and provided their solutions.

In this article, the physical and biological characteristics of raw animal and plant material for protein-inoil emulsion and the technology of the meat molecular product «Pressed horse meat in the form» were considered.

An important role in solving protein deficiency is the rational use of secondary raw materials in the food industry. The authors found the optimal combination of proteins of dairy, meat and vegetable origin. The balance coefficient of amino acid composition was chosen as the optimization criterion

This article describes the main directions of socio-economic development of Pavlodar region, provides characteristics and dynamics of the main areas and sectors of the region, including the state of industrial production, agriculture, development of small and medium-sized businesses, the labor market, trade, electricity, heat and water supply, construction. The region is characterized by a progressive and diversified economic structure. In the structure of industry of Pavlodar region the largest share is occupied by the manufacturing industry. The priority direction of development of the regional economy in the context of ensuring its socio-economic development is the development of small and medium-sized businesses

Essential aspects of formation of terminological thesaurus in the field of aluminium industry are considered in the article. It is known that such dictionaries are usually ranked depending on the sphere of their activity. They may include technical dictionaries, phraseological dictionaries, dictionaries of synonyms, polytechnic dictionaries, special dictionaries in different directions, etc. This process of thesaurus formation not only ensures the integrity of the system, but also provides access to its content.

The present article analyzes the problematic issues of digitalization of the automotive industry, motor transport and logistics in the Republic of Kazakh stan. The main emphasis is made on the consideration of positive results for the economy and society, which is the digitalization of the automotive industry, transport and logistics, the analysis of the tasks and content of digitalization in these sectors, the analytical study of the prospects of legal regulation of the automotive industry, motor transport and road logistics in the form of domestic legislative and international legal means to improve digitalization in these areas. The names and substantiation of 7 draft laws of Kazakhstan, which could be adopted in the near future by the Kazakh legislator, Вестник Инновационного Евразийского университета. 2019. № 2 ISSN 1729-536X 35 are proposed. The most important and priority bills include: «On state management of digital (creative) economy», «On the development of intelligent transport system in production and operation», «On the introduction of digitalization in the activities of companies, enterprises and institutions », «On the improvement of logistics based on digital technology along all the Kazakhstan roads».

Different diagrams of thermal pumps operation at thermal power plants are considered in the article. Thus, installation diagrams are considered for thermal pump based on the use of low -grade heat of turbo-unit lubricating system oil and blow-down water of a steam generator.

The article describes the main directions of improving the process of implementing the cluster initiative in the regional management system. It is shown that increasing the innovation activity of the region is most effective and efficient in cases of creating clusters, the formation of which is preceded by a long stage of identifying the prerequisites of cluster formation, justifying the acceptable nature and form of cluster initiative and developing a mechanism and tools for its implementation

The article is devoted to the task of automating the assessment of the electrical safety level of electrical installations based on the determination of the electrical resistivity of soil layers ρ in specific climatic conditions. The soil ρ value depends on many factors, which can vary significantly during the year. Therefore, the decision was made using modeling based on one of the areas of artificial intelligence: fuzzy logic.

Various methods and approaches in teaching foreign languages are gaining popularity in the modern world of globalization and integration. The integration of the education system caused by the acceleration of the process of mastering foreign languages and increasing its quality, in this regard, this article discusses the latest world teaching methods in order to implement them in the educational system of educational institutions. In particular, in the modern educational environment, the approach based on the idea of integrating subject and language learning in the process of professional training of future specialists (Content and Language Integrated Learning) is of particular importance, which contributes to the formation of professionally-oriented competence in a foreign language. In this regard, the article presents the methodology for activating the knowledge and skills of students in lectures, practical training and during independent work of students on the example of the discipline “Economics and entrepreneurship in industry” for students of non-linguistic directions of training in accordance with the methodology of content and language integrated learning (CLIL). The methods of applying the “Language input theory”, “Second language acquisition” theory, “Interaction theory” in lectures, practical training and during independent work of students in the discipline “Economics and entrepreneurship in industry” are also proposed. A practical algorithm of the course of the lesson (on the example of lectures) in accordance with the CLIL methodology according to the specifics of the discipline is presented. The methodology of evaluating students’ knowledge in accordance with the credit technology of training is presented. In the article, special attention is paid to the auxiliary role of the teacher in helping students master the materials of the discipline, which is reduced as the student acquires basic professional knowledge and skills. This emphasizes the auxiliary role of the teacher at the first stages of training (acquaintance, introduction, training, including independent analysis and evaluation of data while learning a foreign language), followed by independent training of students

Rapidly changing trends in development of the countries’ economies require rational approach to regulation of innovative activity and investments directed to organization of real economy sector. At the same time, for analysis of current state policy in innovative development system fully it takes to assess effectiveness of regulation innovative activity mechanisms in the economy of Kazakhstan. In this article an assessment of mechanisms of innovative activity regulation in Kazakhstan in global system of competitiveness is carried out. For this purpose, an expert assessment system is used, which is realized as method of Global Competitiveness Index of World Economic Forum (WEF). The authors investigate ranking of WEF in Kazakhstan economy, in particular, assessment of carrying out of country’s innovative activity. Thus, purpose of research is to assess mechanisms of innovative activity regulation in Kazakhstan in a global system of competitiveness. Methodology – synthesis, content-analyze, accommodation, monographic method, factor analysis, economic-statistical research method. Carried out assessment of mechanisms of innovative activity regulation in Kazakhstan in global system of competitiveness allowed fully assess effectiveness of regulation innovative activity mechanisms in economy. Researching subindices of International rating of World Economic Forum for 2017-2018 in relation to 2013-2014 authors noted that in Kazakhstan today there is decrease in all subindices of rating and factors (“Basic requirements”, “Business sophistication”), except for “Innovation” subindex. This subindex was significantly decreased due to sharp deterioration in macroeconomic environment, which is directly related, in opinion of authors, to significant losses in revenues from oil export. This in turn affected deterioration of budget’s indicators. There is special attention to place and role of innovative activity regulation in country’s socio-economic policy. Organizational-methodological problems during realization of innovative policy in Kazakhstan are also in details investigated, which makes it necessary to solve them in order to achieve innovative policy’s efficiency at regional and national levels.

Among many environmental conditions that affect a person, the most important factor is nutrition. Today, there is no doubt that there is a direct link between nutrition, health and disease. Proper nutrition ensures normal growth and development of a person, contributes to the prevention of diseases, has a positive impact on life expectancy and creates conditions for adaptation to the environment. A very actual topic for public catering in the Republic of Kazakhstan, namely for fast food companies, is the development of new recipes and culinary products from relatively inexpensive vegetable raw materials, as well as qualitatively new food products with a purposefully changed chemical composition. One of the main ways of solving problems of expanding the production of products for quick service, as well as products for dietary and therapeutic and preventive nutrition is the use of sprouted grains and beans. In this article, poly-grain mixtures of sprouted wheat and extruded soy beans in different ratios are studied and considered. Poly-grain mixtures developed by us are balanced in nutrients, vitamins and amino acids. The research was carried out on the basis of the accredited testing laboratory of RUBICOM enterprise LLP and the scientific laboratory of the Innovative Eurasian University. The purpose of this work is to study a promising method for increasing the nutritional value of grain mixtures by extruding them at different temperature conditions. To achieve this goal, the following tasks were planned: – to study the grain of soy beans and sprouted wheat on the organolepti c characteristics and chemical composition of the poly-grain mixture; – examine the chemical composition of the poly-grain mixture before extrusion; – choose the optimal mode of the extrusion process; – study and analyze the chemical composition of poly-grain extruded mixture; It should be noted that we have developed for the first time the optimal technological mode of extrusion of poly-grain mixture from sprouted wheat and soy beans, and the physical and chemical composition of the poly-grain mixture was studied. The results of the research presented in this paper are the basis for the development of recipes and technologies for fast food products. The reliability and validity of scientific statements is confirmed by the choice of modern methods of chemical composition analysis.

When managing a filling station chain, it is necessary to solve the following tasks in dynamics: determining the volume of purchases by types of oil products sold and redistributing the available volume of various types of oil products to filling station chain. The peculiarity of this control task is that the replenishment of the storage of oil products is carried out centrally, and the sale of each type of fuel is carried out at separate filling stations of the network, that is, in many points. At the same time, the volume of each type of fuel sold by each station of the network should be taken into account separately, taking into account the seasonal demand for a specific oil product. In addition to modeling demand, information is needed on the volume of petroleum products that can be purchased from suppliers with the possibility of increasing or decreasing the volume of purchases due to demand. To solve this problem, a list of suppliers of a specific type of oil product with a possible range of supply volumes must be determined. In the proposed model, an attempt is made to solve the above problems. To solve them, a management model was developed, which was implemented using the Visual Studio C # programming environment and MS SQLServer DBMS. When developing the structure of the database tables, the task of managing a network of filling stations based on the Petri net was taken into account: that is, the database tables provided for storing information on the volumes of supplies of petroleum products, the volume of sales of each type of petroleum product, as well as the time of deliveries and sales. To solve the problem of centralized procurement for all types of fuel, the database provided tables with information about suppliers and possible volumes of supplies by them of various types of petroleum products. To solve the problems of forecasting demand, the model includes algorithms for predicting the volume of sales of petroleum products based on the accumulated time series of data for each type of fuel separately. The forecasting was carried out in order to assess the required volumes of purchases of oil products for the coming period. The prediction algorithms are implemented using two methods: linear approximation and exponential smoothing. Both algorithms take into account the seasonality of demand.

The article describes the results of a study of the effectiveness of the standards being implemented in railway transport. A general view of efficiency and standardization was analyzed. It was studied which document regulates the application of standardization in the Republic of Kazakhstan. Further, the international railway standard IRIS «International Railway Industry Standard» was taken as a basis, which, in turn, is based on the international standard ISO 9001. A study of the methods and types of effectiveness of standards was carried out, as well as an analysis of the applied international standard in the field of railway transport IRIS. The purpose of this standard is to create a business management system that allows for continual improvement, with an emphasis on preventing and reducing delivery defects. It is important to note that the effectiveness of standardization is evidenced by examples showing that ignoring standards turns out to be huge losses for a company for a number of reasons, for example, because its products have not been certified for compliance with a specific standard; due to the additional costs of the company for reworking products that are not manufactured in accordance with the requirements of the standards in the country of export. An analysis of the effectiveness of standardization work in the railway industry can be expressed in relative terms of the effects obtained as a result of the application of the standard: for example, in an increase in the level of safety or in economic growth. The basis for determining the actual effect is the actual level of production that existed at the given enterprise before the introduction of the standard. The measures that can be applied in order to increase the efficiency of solving the problems of developing standardization in the field of railway transport have been studied. Such standardization as one of the elements of technical regulation can provide a contribution to economic growth in excess of the corresponding indicators from the introduction of patents and licenses.

Environmental protection measures are based, among other things, on the rationalization of the organization of the production waste management process. Population growth and the race to industrialize pose a serious threat to the ecosystem. Currently, the average global waste generation per capita is 494 kg / year. A large number of industrial enterprises operate on the territory of Kazakhstan. The range of manufactured products is very wide: household items, transport, building materials, equipment and much more. Each type of production is inevitably a source of a large amount of industrial waste, annually at the enterprises of Kazakhstan up to 600 million tons of waste are generated, three percent of which are recycled. On the territory of Pavlodar region there are enterprises in the field of metallurgy, mechanical engineering, chemical industry, construction industry enterprises, light industry, about a hundred in total. In this connection, the problem of treatment and disposal of industrial waste in Pavlodar region is very relevant. The article discusses the system of waste management in order to reduce their impact on the environment, activities for the disposal, transportation, disposal of waste, as well as their disposal at the industrial waste landfill in Pavlodar. The landfill in question is intended for the reception, temporary storage and disposal of non-hazardous solid industrial waste of the «green» level: waste and scrap of chromium, cadmium, aluminum, copper, lead, zinc, manganese, plastic waste, polyethylene, abrasive, rubber waste, ash and ash and slag waste; and also «amber»: waste containing mercury, arsenic, lead, waste batteries, phosphoric slags, waste oils, oil sludge. The scheme of organizing waste storage works is considered. The volume of accepted and recycled waste, as well as those placed at the landfill and used for their own needs, was analyzed, including construction waste, waste sleepers, ash and slag and abrasive scrap. The solution to the problem of industrial waste disposal is associated with the need for innovation and the introduction of new technologies and equipment.

Main problem: Presence of acidic chemicals such as carbon dioxide and hydrogen sulphide, composition of production fluids triggers corrosion. Corrosion in oil and gas industry leads to deterioration of equipment since most of equipment is made of metal alloys. Application of inhibitors is one of the corrosion mitigation methods that needs to be controlled because it is important to identify optimal concentration of the chemicals in production fluids.Residual chemical analysis plays an important rolein identifying the appropriate dosage of corrosion inhibitors and its correction. It is imperative to find the most optimal concentration of amines due to the fact that both overdose and underdose could lead to equipment deterioration. The chemical analysis is hindered by complexity of mixtures that are applied in petroleum industry. Purpose: The main purpose of this article is to find out the most effective method of residual chemical analysis for inhibitors used against sweet and sour corrosion by studying and analyzing corresponding literature review. The analysis should be carried out with robust, sensitive, and accurate instrumentation. Methods :Theoretical study of composition and mechanism of amines used in oil and gas industry as corrosion inhibitors and selection of appropriate instrumental analytical techniques for the residual analysis. Results and their importance: After careful studying and consideration of modern instrumental analytical techniques the most optimal and efficient method in terms of robustness, time saving and cost was selected. Ion chromatography is an adequate method to carry out residual chemical analysis for amines that are used as inhibitors in oil and gas industry to prevent sweet and sour corrosion.

Complex research is carried out on the rational use of natural pastures with seasonal use in a specific area. The research was conducted in 2015-2017 on the lands of “Batyr” farm in Korday district of Zhambyl region. The pasture lands of the farm consists of 5 independent sites and are located in 3 geographical areas: foothill-steppe (950 hа), foothill-dry steppe (1370 hа) and foothill-semi-desert (1880 hа). The total area of distant pastures is 4.200 hectares. As a result of conducting of geobotanical researches, the farm territory of peasant farm "Batyr" in Korday district of Zhambyl region was divided into seasons (spring-summer-autumn) of their use, the yield of natural herbage and live weight gain of animals was determined. Results of accounting of productivity of natural herbages on zones, seasons of year are given in article and the gain of livemass of animals for the pasturable period is defined. When determining efficiency of sheep it is revealed that higher additional weight of a liveweight is received in experimental group of animal. The seasonal pasture on average in three years of researches at the end of the pasturable period provided an increase of a live weight of rams on 3.370 kg/head at ewes on 8.020 kg/head and lambs of birth year on 8.640 kg/head is more in comparison with control groups of animals. It should be noted that for the pasturable period the increase of alive mass of animals in experimental group in 2017 is higher than a research in comparison with previous years. In 2017 at a pasture of animals on seasonal sites it was applied intra seasonal pasture turnover at which unproductive driving of animals in search of a forage on the grazing square is practically reduced three times, besides degradation of the pasturable territory is completely excluded. It was found that the use of seasonal use of pastures provides more weight gain studied animals compared to animals that graze in one place with an unsystematic manner of grazing. The implementation of the results created the conditions for the restoration of degraded pastures with an increase in the growth and development of vegetation cover up to 15-18 % and an increase in livestock production through rational grazing up to 12 %.

Main problem: the organization of anti-doping education of students assumes the presence of a specialized discipline "Fundamentals of anti-doping support" and the inclusion of anti-doping topics in classical disciplines. The formation of a number of competencies in the field of anti-doping education requires new interactive forms of organization of activities that take place in the development of both disciplines of the medical and biological cycle, as well as sports, pedagogical and social disciplines. A conscious perception of the industry problems associated with the use of doping in sports and the health of the nation provides knowledge of chemistry, biochemistry, physiology, sports medicine. Purpose: study of the organization of the educational process for anti-doping support in a sports university. Methods: today, the main methodological innovations are associated with the use of interactive learning technologies. The learning process, based on the use of interactive teaching methods, is organized taking into account the inclusion of all participants in the learning process. An educational communication environment is created, which is characterized by openness, interaction of participants, equality of their arguments, accumulation of joint knowledge, and the possibility of mutual evaluation. The organization of the educational process on anti-doping support for InEU students assumes the presence in the educational program of a specialized discipline "Fundamentals of anti-doping Support" and the introduction of components of anti-doping education in already established disciplines. Results and their significance: the organization of the educational process on anti-doping support for InEU students assumes the presence of a specialized discipline "Fundamentals of anti-doping Support" in Educaional Program and the inclusion of components of anti-doping education in the formed disciplines.

The COVID-19 coronavirus pandemic has brought about a new economic reality, to which every economic entity must adapt, regardless of the scale: within a region, a country, or the whole world. The article examines the regional economic mechanism in the context of the pandemic in the context of the interaction of the market mechanism of self-development and the control influence of the regional authorities. The destabilization of the economic situation in the regions as a result of the pandemic and related restrictions poses the problem of revising the main directions of regional policy To achieve the set goals and objectives, the general methods of empirical and theoretical research were used: analysis, synthesis, induction, deduction, generalization, description. Three spheres play a key role in the economy of Pavlodar region: industry, trade and transport. Just how to remain positive dynamics in terms of industrial production and maintained the services will depend on the development of the region, the main indicators which are discussed in this article through the prism of the events in the context of the pandemic. The necessary health measures taken in response to the pandemic have led to a severe reduction in mobility and are accompanied by high economic costs. The quarantine measures have had a direct impact on businesses, especially microbusinesses. To support this sector, tax incentives were provided, lending was expanded, and measures were taken to further facilitate the business environment. The article reflects only a small list of issues that required changes in the economic mechanism in the context of the pandemic and the introduction of restrictive measures, as well as the strengthening of the influence of external control on the economy. At the same time, the state as whole and individual regions, taking into account their potential and the actual situation in the economy, need to find an optimal balance between the prohibitions and restrictions imposed to ensure the safety of human health and the preservation of the economy in a functional mode, work and income of employees. This problem of finding a balance between prohibitive and permissive measures requires further analysis. At the same time, the state needs to develop and apply tools of a systematic nature, focused on the long term.

The progress of work on the creation of an "intelligent transport system" in Kazakhstan, the development and modernization of the road industry will be reported. The economic and social effectiveness of several transport corridors and new projects were analyzed. Transport corridors of foreign countries, methods of providing logistics services were presented. In his address, the head of state paid special attention to the issues of digitalization of all spheres of life of the population, including the transport sector of Kazakhstan. Currently, the Ministry of investment and development of the Republic of Kazakhstan is working on the creation of an "intelligent transport system" within the framework of the state program «Digital Kazakhstan» (ITS). ITS goal is to systematically integrate transport infrastructure, transport devices and users with modern information and communication technologies aimed at improving the safety and efficiency of the transport process. The concept will include 11 components in ITS. One of them is a special automated measuring instruments (UAVs), which are installed in the main automobile corridors. This device is designed to measure moving vehicles without contact and eliminate unjustified stops. This year, it is planned to put into operation 10 units of RSPP, and by 2020 it is planned to increase their number to 46 units. It is also planned to introduce a traffic management system that will inform drivers about the situation on the roads, a system for forecasting and analyzing climatic conditions, which is carried out through a network of weather stations along the roads, a network of video monitoring and special video cameras for detecting traffic violations, toll road systems that cover the cost of maintenance of the national road network, etc. They will be introduced in stages until 2021. The implementation of this project will reduce road deaths, increase the volume of transit traffic and the speed of logistics services, fully cover the main highways with measuring instruments and create favorable conditions for drivers on the roads. Such systems are already operating in South Korea, Japan, Australia, Europe and the United States.

One of the agent modern tasks is to ensure the cleanliness of the air basin. To ensure this, it is necessary to clean the combustion products of the fuel removed from the boilers after their cooling into the atmosphere from harmful substances, including nitrogen oxide.

Today, there is a full development of the food industry. It is characterized by the widest mechanization and automation of production and transport processes, the use of artificial cold and vacuum technology, the latest physical methods, chemical and biological preparations to accelerate technological processes. There are a huge variety of new products. New ways of long-term preservation of products in hermetic airtight packaging are promising. Now it is possible to deliver products from almost any industry to anywhere in the world. But the main problem for the modern consumer is that today's food industry is moving by leaps and bounds in the application and addition of chemical food additives: preservatives, flavors, dyes, stabilizers, antioxidants and substitutes for raw materials. To correctly answer the question of how to treat the use of food with food additives, it is necessary to understand and weigh the main disadvantages and advantages of using them. Advantages are that the product is better preserved, has an attractive appearance. Disadvantages are that the human body wears out, processing various chemicals, it is harmful to health. And with certain doses of use it becomes dangerous. Everyone has their own attitude to their health and their own priorities in life. Many people have come to terms with the daily use of products with additives, but others consciously refuse almost everything in the store. But the fact that no one wants to be poisoned from an overdose of various chemicals or starve to death. Therefore, the main advice is to carefully study the composition indicated on the label of food products and know the measure of their consumption. It is also impossible to believe blindly that the label was written with the truth. Manufacturers often use additives literally visually, which can lead to the production of a product with a dangerously higher concentration. It also happens that the manufacturer intentionally exceeds the norm in order to hide the shortcomings of the product (stale, poor quality of raw materials) and increase the yield of the finished product. The food additives added to many foods (usually designated by the code E) are predominantly harmful to the body. With moderate consumption, the use of products with E-supplements is not too harmful to the body (for example, several times a month). The situation is dangerous when a person consumes products with a large number of food additives daily or even several times a day when using various products. Nowadays, there are several hundred food additives with the code E (from E100 to E1521).

In the article, the object of research is the telecommunications industry of the info communication services market of the Republic of Kazakhstan. Despite the fact that the structure of the communications and telecommunications market of the republic has changed significantly for the better in recent years, the development of various segments of the industry has diverse regularities that form quite definite trends that determine the prospect of their development. In this regard, the aim of the research was the analysis of the state of the telecommunications industry of Kazakhstan, identification of the main players in the industry, identification of tendencies and regularities of development of its segments. As a scientific tool for solving the problem set in the article, a set of methods of statistical and analytical analysis was used, on the basis of which the main provisions of the analysis, problems and tendencies of development are justified and illustrated. It should be noted that the market of information and communication services of the Republic of Kazakhstan is characterized by a state presence, the essence of which is manifested both in the use of tools that form structural and technological shifts in the development of market industries, and support for its development in priority areas that determine the competitiveness of the market of the state, as a whole. One of these tools in the development of the information and communication sector of the Republic of Kazakhstan is the state program “Digital Kazakhstan”. The development of the market is accompanied by the emergence of new players in it from the technology sector, and as a result, increase of the competition for consumer through the expansion of the range of services, improving their quality and pricing policy. As a result of competition, a pool of leading operators has been formed in the sphere of telecommunications services in the republic, whose activity already go beyond the national framework. At the same time, the infrastructure of the industry, which is characterized by the dominance of analog data transmission system and the underdevelopment of digital and satellite infrastructure, still needs to be improved. Taking into account the forecasts of rapid growth in the near future in the global market of mobile telecommunications services, this will require both from operators and from the state, in general, modernization of the existing telecommunications infrastructure, as one of the important factors of Kazakhstan’s entry into the global information space.

Main problem: In the 18th century, when industrial production began, the use of steam and mechanized production caused major changes in the economy. As a result, production costs decreased along with an increase in the quantity and quality of products. During this period, production underwent a revolutionary transition from manual labor to mechanization. The potential impact of Industry 4.0 on labor markets remains an under-explored scientific field. It is estimated that Industry 4.0 will lead to unemployment by changing the employment structure and will bring new structural problems in terms of unemployment and labor relations. Purpose: The purpose of the study was to establish the impact of Industry 4.0 on the labor market and identify the consequences of the impact. Methods: studied, the evolution of production development, when mass production with electricity led to the Age of Industry 2.0, and then the emergence of the digital revolution, the use of electronics and information technology in production processes, marked the beginning of the Age of Industry 3.0. It is expected, according to international experts, scientists, that automation and robotic production will have a serious impact on the unskilled workforce and cause a critical reduction in the labor force of vulnerable sectors of society, that is, women, migrants, youth and the elderly. Results and their significance: This study assessed the possible impact of the fourth industrial revolution on labor markets. Through a literature review and analysis of emerging trends in Industry 4.0, the risks, opportunities and challenges of the process are explored in a comparative perspective. It has been established that countries must correctly perceive the transformation of labor markets and take appropriate measures. Otherwise, the applied labor-based low-cost industrialization model will lose its comparative advantage

The Kazakhstani manufacturer has repeatedly faced situations when pseudo-enterprises, disguising themselves as domestic producers of goods, works and services, received preferences and used government support measures, won government and other purchases, while not having enough equipment for production. The article is devoted to current problems and prospects for the application of the Industrial Certificate in the Republic of Kazakhstan. The dynamics of the development of the sphere of public procurement of the Republic of Kazakhstan is considered, depending on the specific requirements for certain areas of production of goods, works and services. The material in this article is important from the point of view of ensuring fair competition between competing enterprises in the same industry. The complex of transformations in the system of standardization, certification and quality management has been carried out since the first years of independence of the Republic of Kazakhstan. These transformations have been observed over the years, vivid examples of which are: the application of the European model of technical regulation to the modern realities of the economic situation in the Republic of Kazakhstan, accession to the Customs Union, the adoption of unified technical regulations of the Customs Union, the introduction of new regulations and legal acts defining the share of local content in products and services, as well as the potential of domestic industries. The results of these transformations have proved that the system of technical regulation of the Republic of Kazakhstan is an effective tool for the development of the economy. The development of new Kazakhstani normative legal acts and normative documents introduced to support the domestic producer of goods and services will contribute to the transformation of the old system and the creation of a new one that is fundamentally different from the previous one. The article discusses problematic issues in the field of industrial certification, namely: a lack of qualified personnel; unregulated pricing system for work carried out in this area; the complexity of the industrial certification procedure; a lack of automation of processes of the industrial certification mechanism. Analyzing the practice of industrial certification, this article offers recommendations for solving the above problematic issues. New edition of amendments and additions to the «Rules for the formation and maintenance of the register of domestic manufacturers of goods, works and services, as well as the issuance of an Industrial certificate» approved by the decision of the Presidium of the National Chamber of Entrepreneurs of the Republic of Kazakhstan «Atameken» dated 28.12.2018. No. 28 is designed to reconstruct the process of obtaining the Industrial Certificate. The process should become more transparent, understandable and highly efficient. Also, with the introduction of changes, the problems that hindered the receipt of the Industrial certificate by individual enterprises should be resolved.

The sharp deterioration of the environmental situation in the Republic of Kazakhstan, associated with human activity and the impact of harmful factors on the environment, affected the quality of food consumed by insufficient consumption of domestic fruit and vegetable products containing vitamins, minerals of an alkaline nature, carbohydrates, vegetable proteins, pectin substances and active fiber. The problem of improving the quality of growing and processing fruits and vegetables is one of the main tasks of the food independence of the Republic of Kazakhstan. Currently, the share of large vegetable farms in the Republic of Kazakhstan is only 10%. The volume of industrial processing of fruit and vegetable crops in Kazakhstan is insignificant. The demand for domestic fruit and vegetable products in the country is met only by 35-40%, most of it is imported from countries such as Russia, Kyrgyzstan, Uzbekistan and China. There is a need for the development of organic vegetable growing in Kazakhstan and the creation of new types of domestic fruit and vegetable products containing a sufficient amount of useful and active substances that can bind and remove toxic substances and radioactive elements from the human body. The purpose of the work is to improve the technology of fruit and vegetable semi-finished products with natural spicy and aromatic additives, to develop a multi-component recipe for vegetable mixtures and a method for producing quick-frozen vegetable mixtures with high quality indicators. These studies were aimed at studying the chemical composition and functional and technological properties of vegetables and spicy - aromatic plants for the content of biogenic compounds: carbohydrates, proteins, vitamins, essential oils, minerals and other substances. The structure of plant tissues was studied and the mass fraction of moisture, dry matter, fiber, mono - and disaccharides, pectin substances, vitamin C was determined, the formulation and production technology of Assorted vegetable mixtures were developed, and quality indicators were determined.

Main problem: Microbial-plant relationships, including epiphytic microflora, are the subject of attention of many scientists. Numerous works confirm the high interest of researchers and the relevance of studying this topic. Despite many years of research, some questions concerning the characteristics of the epiphytic microflora still remain open. It is already a well-known fact that the epiphytic microflora is directly related to the physiological development of the plant, including yield. This is due to the close interaction of the plant with the microorganisms living on its surface throughout the entire growing season. It is also proved that epiphytic microflora has the ability to change characteristics under the influence of environmental factors (temperature, humidity, soil contamination, sunlight, etc.). In this regard, the study of this topic is one of the important areas of biological and agricultural sciences and is of high importance. It should be noted that a significant role in the development of agriculture in the Republic of Kazakhstan and the Pavlodar region is played by representatives of vegetable crops, including tomatoes and potatoes belonging to the Solanaceae family, which indicates the high importance of the plants selected for the study. The combination of the above arguments determines the need to study the epiphytic microflora of plants and establish the regularities of its influence on the adaptive properties of the studied plants of the Solanaceae family, as well as on their productivity. In turn, the study of epiphytic microflora can also contribute to the search for new ways to increase the yield of plants and their resistance to various diseases. Purpose: The article is devoted to the study of the properties and characteristics of the epiphytic microflora of the surface of various organs of plants of the Solanaceae family (on the example of tomato and potato). The variability of the composition and number of epiphytic microorganisms in seasonal dynamics is shown. Methods: bacterioscopic method, fingerprint method, flushing method, Gram staining method. Results and their significance: The characteristics and properties of representatives of epiphytic microorganisms of aboveground (leaf, fruit, flower) and underground (potato fruit) plant organs were studied. The role of the influence of environmental factors on the variability of epiphytic microflora is determined on the example of plants Lycopersicon esculentum Mill. (common tomato) and Solanum tuberosum L. (tuberous nightshade). The differences in the microflora of different plant organs in different periods of vegetation are shown.

Main problem: One of the officially recognized problems of the system of state planning and regional development is imperfection of the methodology for assessing the effectiveness and efficiency of the implementation of the activities of state bodies. In fact, there is no assessment of economic and social efficiency and an assessment of the impact on society. In this regard, the authors have developed methodological approaches to assessing the quality (effectiveness) of state programs (on the example of the program of the Republic of Kazakhstan “Employment Roadmap – 2020”) is urgent task for theory and practice of regional development. The purpose of the research is the investigation of the methodological foundations for evaluating the quality of implementation of state programs of the Republic of Kazakhstan in the field of employment (based on the materials of program of the Republic of Kazakhstan “Employment Roadmap 2020”). Methods: The article uses a systematic approach to solving problems that ensures the unity of qualitative and quantitative methods: qualitative content analysis; a monographic method; the method of economic and statistical research. Results and their value: The value of the study lies in the fact that methodological approaches to the evaluation of programs in the public administration system are identified. For an economic assessment involving the calculation and analysis of unit costs per program participant, the authors propose to conduct dynamic and comparative analysis of the values of unit costs for achieving final results in directions of“DKZ-2020” program. This will allow to compare individual projects and program areas by costs in dynamics and further to identify those factors that work for their unjustified growth. The calculation of presented indicators is also important in regional context, since it allows considering those regions that significantly deviate from the national values in one direction or another

The main problem: This article is devoted to the key problems of the fuel and energy complex of the Republic of Kazakhstan: 1) lack of production capacity to meet the growing demand for energy and fuel from the economy and the population. Increased demand for electricity and heat, which will require the commissioning of new generating capacities.There is already a shortage in the fuel markets. Modernization and bringing the existing oil refineries (hereinafter referred to as refineries) to full capacity will not allow providing the domestic market until 2030; 2) the export orientation of raw materials, the dependence of the economy on the export of energy resources. In order to attract technology and investment in the oil and gas and nuclear industries, agreements on the extraction of energy resources were concluded with international export companies. In the medium term, Kazakhstan may face a shortage of oil for domestic refineries, if measures are not taken to stimulate its refining within the country. The uranium mined is fully exported; 3) high energy intensity of the economy, low level of energy efficiency. There is a high potential for increasing the efficiency of energy use both in the electric power industry and fuel production, and at the level of final consumption – in industry and housing and communal services; 4) decrease in the replenishment and quality of the resource base in the oil and gas, coal and nuclear industries; 5) low environmental friendliness of technologies used in the fuel and energy complex. Purpose: The purpose of the article is to reveal the problem in the field of ensuring the fulfillment of international obligations between different countries and their own energy sufficiency by gradually changing the structure of energy production. Methods: Studying the experience of increasing the efficiency of the use of energy resources and energy saving as a priority of the state policy of the country. Analysis of production capacity with a constantly forecasted shortage of primary energy resources and insufficient growth of capacity for the production of electricity and heat. Consideration of the possibility of compensating for the shortage by saving energy resources, increasing tariffs for energy carriers, as a stimulating factor for their effective use. Results and their significance: The results of this article will reflect the problems of energy, as the most important driving force of global economic progress. The well-being of the people depends on the state of the country's energy sector, therefore there is an urgent need to solve the emerging problems. The global energy problem is, first of all, the issue of stable and efficient supply of fuel and energy to mankind. Today, the energy sector of Kazakhstan is focused on fuel resources, since the country is provided with hydrocarbons and other energy resources. About 72 % of electricity in Kazakhstan is generated from coal, 12,3 % from hydro resources, 10,6 % from gas and 4,9 % from oil. Thus, the four main types of power plants generate 99,8 % of electricity, while alternative sources account for less than 0,2 %.

Currently, close attention is paid to industrial safety at hazardous production facilities. Compliance with industrial safety requirements is directly related to the risks of accidents that can lead to man-made disasters, negatively affect the health and life of the population. As in any other industry, there are problems in ensuring industrial safety. There are several reasons for this: the backlog of standards from scientific and technological progress, the exclusive competence of state authorized bodies, and the lack of a risk-based approach. After the collapse of the USSR, the requirements of industrial safety in the Republic of Kazakhstan have practically not changed: laws and statutory instruments (hereinafter-the LSI) are approved and put into effect, after which they are constantly changed and supplemented; the presence of national and international standards, which, in fact, are revised on the basis of the USSR standards, taking into account the influence of the realities of the time. It can be concluded that the current standards are not focused on the future, scientific and technological progress, innovation, so they are constantly undergoing changes, thereby adapting to the necessary requirements that dictate modernity. State regulation does not contribute to the effective development of industrial safety. This is due to the fact that the state performs exclusively supervisory functions (thus it is exclusively educational in nature), and there is no dialogue between authorized state bodies, expert organizations, scientific organizations, and testing laboratories. If we consider the experience of the Russian Federation in the field of industrial safety, then it makes no sense to accept even some experience, since: similar to the Kazakhstan’ LSI and regulatory and technical documentation (and their constant dynamics), the development of cooperation with the Russian Federation within the framework of the Eurasian Economic Union. Accordingly, it is advisable to consider the experience in the field of industrial safety in Europe and the United States of America because of the effectiveness of regulation and supervision than in the Republic of Kazakhstan and the Russian Federation. This article provides information about international experience in the field of industrial safety in the United States and the European Union. The tasks of state regulation in the field of industrial safety in the Republic of Kazakhstan, the Russian Federation, the United States, and the European Union are described in detail. The analysis of normative-legal acts and normative-technical documentation is carried out. Based on the analysis of international experience, solutions to problems in the field of industrial safety for the Republic of Kazakhstan are essentially presented. The purpose of this article is to reveal the problem in the field of industrial safety in the Republic of Kazakhstan and international experience that the Republic of Kazakhstan can borrow in order to effectively ensure industrial safety. Study of international experience (USA, EU countries, Russia) in the field of industrial safety in terms of: analysis of standards; regulation (control and supervisory functions) to ensure safety. The results of this article will reflect the problems that hinder the effective provision of industrial safety in the Republic of Kazakhstan and essentially suggest ways to solve them.

The main problem: The rheological properties of calcium salts are of theoretical and practical interest for a modern researcher. The theoretical interest is primarily related to the search for general patterns and manifestations of the rheological properties of solutions of calcium salts. The practical component is based on the search for patterns and dependencies of the properties of solutions on the structure and composition of the object of study. Such chemicals as calcium salts are of particular practical interest, they are widely used in various fields, such as the food, chemical and pharmacological industries. Hydrophilic high-molecular solutions of alginates, namely calcium alginate, are actively used in the preparation of soft dosage forms, the manufacture of jelly masses in confectionery, act as thickeners in the food industry. They are characterized by a fairly high percentage of viscosity at low concentrations, bioavailability, prolonging effect, absence of irritating properties, biocompatibility with many polymers, which is especially important in the pharmaceutical industry and medicine. The use of calcium salts for these purposes is currently very promising, since these organic salts have a number of unique properties associated with gelation. Purpose: This paper contains the results of studying the features of the rheology of calcium alginate solutions. A concentration range of 0.1-0.7 % was chosen for the studies, which is sufficient to avoid gelation at room temperature. The dependence of viscosity on concentration, temperature (in the range of 25-45 °C) and shear rate were studied. Methods: Analysis of theoretical sources, observation, comparison of results. The rheological characteristics of the obtained substances were studied using a capillary viscometer. The measurements were carried out in the temperature range of 25-45°C. Results and their significance: it was found that there is a significant dependence of viscosity on concentration and temperature. For concentrations of 0.3 – 0.7 %, a similar type of dependence is observed, in contrast to solutions with a concentration of 0.1 % . Explanations of these dependencies were proposed.

This article discusses the current data on the biochemical properties of bacteria of the genus Lactobacillus and their use in industry, particularly in dairy production and biotechnology. Microorganisms of the genus Lactobacillus have antagonistic activity against pathogenic microorganisms and perform an immunomodulatory function. The positive effect of lactobacilli on human health explains their active use in probiotics. The positive effects of normal intestinal microflora and probiotics are mainly due to bifidobacteria and lactobacilli. In probiotic therapy, various types of bacteria of the genus Lactobacillus are used, such as: L. acidophilus, L. rhamnosus, L. plantarum, L. fermentum, L. delbrueckii subsp. bulgaricus, L. casei, L. paracasei. In recent years, the biotechnology of probiotics has been intensively developing - drugs used for the correction and prevention of microecological disorders in the gastrointestinal tract of humans and animals. An urgent issue is obtaining new data on the biological properties of lactobacilli, creating new probiotic preparations based on them using modified approaches to cultivation. The results of determining the species L. acidophilus L. casei, L. rhamnosus, L. paracasei, obtained by the classical biochemical identification method based on saccharolytic activity, complicating species identification, are comparable to the molecular genetic method. In the case of L. casei, L. rhamnosus, L. paracasei, it is necessary to carry out modern identification methods based on the polymerase chain reaction, since their biochemical properties are similar, which makes it difficult to carry out species identification. The molecular genetic method is a valuable addition to the intergeneric and species identification of lactobacilli, given the variability of the classical biochemical method.

Currently, the problems of environmental safety are facing society. The industry develops every year. In this critical economic situation, the oil industry is a stimulant for the economic sector in Azerbaijan. The level of development of this industry is also relevant due to other reasons: sociological, technological and features of the economy of Azerbaijan. The production activity of oil processing, concentrating harmful substances and energy, is a source of man-made danger and pollution of the natural environment. The risk management process mainly consists of three stages - risk safety analysis, risk assessment, which is carried out in comparison of calculated and actual risk levels, the so-called acceptable risk levels and the adoption of appropriate regulations and management decisions. One of the factors that should be taken into account when assessing risk and safety is to determine the necessary costs. Since these costs are paid directly to the company, they try to minimize them as much as possible, which reduce the accuracy of risk assessment. One of the objectives of the study is to determine the optimal value of the necessary costs. It is established that the less reliable the method, the lower is the cost of its implementation. The methodological basis of the work was scientific works on these problems of scientists-economists, mathematicians on safety and risk assessment at industrial enterprises. When developing the presented methodology, computational algorithms developed by Dow Chemical were used. This company has collected a large volume of material on accident statistics, taking into account damages. Based on the obtained and experimentally verified data, a system of indices has been developed, an assessment of various indicators for qualitative and quantitative risk assessment of oil refineries. The analysis of the technogenic danger of oil refineries makes it possible to determine ecological and economic losses and choose rational possibilities of acceptable risk. The required costs, depending on the level of risk, are determined based on an increase in the accuracy of calculating the probability of occurrence of the cause of risks. The article examines the relationship between the expected level of risk and economic losses during oil refining in separate technological units, which allow determining the required level of risk and the expected economic damage.

The article is devoted to the development of a technology for obtaining organic fertilizers from poultry waste based on biocatalytic processes. Currently, many poultry farms have become sources of environmental pollution, thereby causing serious environmental problems and economic and social damage. The problem of reliable protection of the natural environment from pollution by bird droppings is currently relevant. In the area of operation of large poultry farms, air pollution by microorganisms, dust, foul-smelling organic compounds, which are decomposition products of organic waste, as well as nitrogen, sulfur, and carbon oxides, is possible. Bird droppings contain acids, nitrogen, phosphorus and potassium, heavy metals. The content of nitrogen, phosphorus and potassium changes dramatically depending on the quantity and quality of the feed. Humic substances isolated from brown coal have a sufficiently high sorption activity and are used as cheap sorbents for solving a number of environmental problems in industry. These studies are aimed at minimizing the main disadvantage of the anaerobic digestion process, the low reaction rate, which leads to the need to create large-volume bioreactors. On the basis of the research carried out, a technology has been developed for obtaining organic fertilizers from poultry waste by the method of anaerobic fermentation of chicken manure with humidity at a temperature of 27 °C - 50 °C with the addition of sodium humate. The resulting fertilizer is intended for use in agricultural production, horticulture, floriculture, forestry, municipalities, in household plots in order to increase the yield and quality of crop production. For the developed technology, an application has been submitted for obtaining a Patent for the invention of the Republic of Kazakhstan «Method for producing organic fertilizers» (priority No. 2021-22818, dated July 13, 2021). The invention allows to significantly reduce the time of fermentation, to enrich the product with organic and mineral products contained in sodium humate, to convert the salts of heavy metals into an insoluble state, to improve the environmental friendliness of the method.

The development of extraction techniques of medical plants aims to maximize the bioactive compounds production. Тechnologies in this area of industry have not high enough еfficiency factor. In some cases, it reaches only 40-50 %. Therefore, development of new methods to effectively extract different compounds from plant material and their input into large-scale industry is of great importance. The goal is to determine an effective and suitable technology for extracting bioactive compounds from medical plant. This is a narrative review paper which focuses on different extraction methods of medical plant. To find relevant articles for this narrative review, 73 articles were reviewed. Of these, 14 irrelevant documents were discarded. This review analyses various extraction processes to guide the selection of suitable methods for various types of medical plants and applications. This is done by outlining traditional and modern methods of extraction techniques, exploring the importance of solvents for extraction, and comparing novel and alternative methods of extraction. In conclusion, based on the current knowledge, solvent extraction is the most common method for medical plants extraction. Enzymatic hydrolysis and supercritical extraction are advanced techniques with high yield of compounds. However, more research is needed for some modern extraction methods.

The tax system, as an integral area of the economic direction of state policy, urgently requires such construction and development that will be directly related to those main vectors of the state policy of socio-economic development, which will help ensure a sufficient amount of tax revenues to the budgets of different levels. In many countries around the world, the COVID-19 pandemic has led to a significant deterioration in the state of public finances. Containment measures, increased government spending, and reduced tax revenues have led to an increase in the budget deficit and public debt, which as a percentage of GDP has reached its highest level in several decades. Restoring public finances is a priority for all countries for many years to come. At present, in the Republic of Kazakhstan, it became necessary to develop a single document, the basis of which should be a system of indicators that determine the trends in the development of the macroeconomic situation in the region, as well as the influence of sectoral and regional factors of the current structure of financial flows on the state of the tax base and the prospects for its development. Purpose of the article is a substantiation of the role of the tax passport in assessing the tax potential of the region in modern conditions. The tax passport of the region should be considered as a document that allows assessing the existing tax base of the region, the level of the tax burden in the context of certain types of taxes in dynamics, by industry, as well as developing a forecast for the receipt of taxes and fees for the future, both under the current legislation and taking into account its possible change. When writing the article, the dialectical method of cognition, the methods of scientific generalization and classification, the method of systemic and comparative analysis were used. The introduction of tax passports will mean the beginning of a qualitatively new system of tax collection, corresponding to market conditions and the scale of the revival of the economy, that will contribute to a change in the tasks of the tax service (there is a need to predict the volume of tax revenues in the medium term, develop new concepts in the field of taxation that contribute to the development of business without prejudice social programs, substantiation of tax programs to ensure protectionist policy in the field of foreign economic activity).

One of the management concerns of the progressive development of a modern organization is the efficiency of its HR potential. This concern is often resolved to quality issues of training graduates, inefficient labor market regulation, both at public level and regional one. These factors, external to the organization, positively impact the effectiveness of its activities, but today the government and business environment have already formed the tools to address this problem. However, there are also a number of inner concerns in HR management based on non-exact coordination and balanced HR Strategy, its orientation, goals and objectives and the company’s strategy. But only in this situation, both HR Strategy and HR Policy, more specifically, can become an effective tool for HR management as part of the company’s strategic development objectives. The purpose is to study and make a comparative analysis for supporting HR Policy of a number of major Kazakhstan companies, to analyze the relationship and coordination of companies’ HR Policy with their general strategy. We used classic methods, such as analysis, comparison, description, generalization, justification, etc., while preparing the paper and rationalizing the problem studied in it. As to this paper, based on materials of major companies of the Republic of Kazakhstan, the authors study and identify the content of HR Strategy and HR Policy as the main factors of domestic employers’ approach to HR management issues. The analysis proves the multi-vector approaches of Kazakhstan organizations to the formation and HR development. It seems also obvious that HR Policy of Kazakhstan companies has been and remains highly situational manner providing rationale to solve some or other HR problems related to dynamics of market situations and dynamics of goals and objectives for their development. The authors emphasize that the effectiveness of HR management and the HR Policy one of the organization requires a clear comprehension of the position and relevance of HR in organization. Honestly, this comprehension will be mainly governed by such factors as ownership, industry aspects, productivity levels, buoyancy rate of technologies used and the market of products or services sold by the organization. It is highly important that this comprehension is embodied properly in HR Strategy and HR Policy of the organization and is balanced with its market development strategy.

It is known that an increase in the volume of production in any sphere of production as a consequence increases the intensity of anthropogenic impact on the environment, including the atmosphere. This problem is especially typical for oil refineries. On the one hand, this is due to the complexity of oil refining processes and the release of various hydrocarbon compounds into the atmosphere during processing. Therefore, when implementing sustainable ecological and economic development in the Azerbaijani regions that are associated with oil refining, an increase in the volume of products should not create an increase in environmental impact. This problem is considered one of the factors directly affecting the economic situation of the enterprise, as well as creating certain environmental, social and economic problems for society as a whole. The purpose is to study the possibility of using the correlation-regression method in solving the problem of determining the presence of the decapling effect. The relationship between the volume of petroleum products produced and the amount of pollutants released into the atmosphere is random and is characterized by stochastic and statistical dependence. At the same time, on the basis of a mutual comparison of the methods of correlation and regression analysis and the method of production function, the effectiveness of correlation and regression analysis is determined. The methodological basis of the work was the scientific works of scientists-economists, mathematicians providing the definition of the decoupling effect at industrial enterprises. In the presented methodology, the obtained estimates of the performed in real time vary depending on the values of the set parameter. When developing the presented methodology, the STATISTIKA software package was used. This program was developed by StatSoft. Based on the obtained and experimentally verified data, the equation of linear regression dependence is determined. During the research, it was found that in some cases it is not possible to evaluate the statistical characteristics of a random variable or it is accompanied by serious errors. Therefore, when processing data, instead of mathematical expectations and variances, we used selective mathematical expectations and variances. The analysis of the ecological and economic situation of oil refineries based on correlation and regression analysis allows us to determine the presence of the decapling effect. The obtained correlation coefficient between the volume of production oil products and the volume of emissions into the atmosphere shows that there is no statistically significant relationship between these parameters. Thus, there is an achievement of the decoupling effect between the production of petroleum products and the volume of emissions of pollutants into the atmosphere.

An analysis of the mechanical, chemical and pyrogenic impact of the Baikonur Cosmodrome on the environment showed the presence of man-made impacts of the first stages (FS) used on the ecosystems of the impact zones (IZ). This article presents the concept of a controlled landing of spent launch vehicles with liquid rocket engines (LRE) in the expected zones of damage to the ecosystems of the area while maintaining the energy-optimal launch scenario of the launch vehicle. Purpose of the article - development of effective technologies for reducing the anthropogenic impact during launches of promising rockets from the Baikonur Cosmodrome based on theoretical and experimental studies of innovative technologies: reducing the area of impact of parts from launch vehicles; fire and explosion safety, no danger of rocket launchers; controlled descent of used first stages; To solve the problem, it is proposed to create an additional IASM, which will be included in the environmental management system of the Baikonur Cosmodrome. Possible design solutions are proposed based on the evaporation of untreated liquid waste from the tanks of separated parts, their fire and explosion safety, and the use of the obtained vapor-gas mixtures for controlled unloading of separated parts while moving along the landing trajectory to the optimal area. The authors of the article have developed evaluation criteria that characterize the main environmental indicators of the studied areas: fire hazard, soil cover and impact on vegetation are studied for inclusion in the IASM. There are objective requirements and basic rules for the creation of HIASM, which is an integral part of the environmental management system of the cosmodrome.

Main problem: Bird droppings and animal manure contain acids, nitrogen, phosphorus and potassium, heavy metals. The content of nitrogen, phosphorus and potassium changes dramatically depending on the quantity and quality of the feed. Purpose: To study the effectiveness of the use of organomineral fertilizer from poultry waste, obtained using biocatalytic processes on the growth and development of plants. Methods: An application for a Patent for the invention of the Republic of Kazakhstan "Method of obtaining organic fertilizer" has been submitted for the developed technology for obtaining organic-mineral fertilizer. In the soil intended for growing seedlings of tomatoes of the “Pepper-shaped Orange” variety and peppers of the “Bogatyr” variety, the resulting fertilizer was applied in the amount of 1 kg per 1 m2 of soil, which was dug to a depth of 8-10 cm and used to grow seedlings in closed ground and subsequent for planting it in open ground. Soil without fertilization was used as a control. The process of soil preparation for open ground, intended for planting seedlings, was carried out for the experimental field with the introduction and control without fertilization. Experimental and control studies were carried out under equivalent climatic conditions, the scheme and technology of watering plants. In total, 100 bushes of each plant species were used in the experiment. Results and their significance: The use of the obtained organomineral fertilizer allows to increase the yield of vegetable crops (tomatoes, peppers) by 20-25% compared to the control. In addition, in the experimental samples, an increase in the number of fruits on a bush was noted with an increase in their size, a decrease in the growing season and the number of damaged fruits.

Main problem: It is very important for each company to obtain an industrial certificate, which makes it possible to get into the Register of Domestic Manufacturers, as they expect to receive large orders. With the receipt of an industrial certificate, their prospects for participation in various tenders and purchases will significantly increase, where they can show their abilities, compete with domestic producers, and also have an advantage over importers. Since July 1, 2019, the industrial certificate has become mandatory for participation in public procurement. Corresponding changes to the rules for public procurement were made by the Ministry of Finance of the Republic of Kazakhstan. Taking into account the experience of the «Rules for determining the country of origin of goods, issuing a certificate of origin of goods and canceling its validity», approved by Order of the Acting Minister for Investment and Development of the Republic of Kazakhstan dated February 24, 2015. No. 155», it becomes clear that the document does not take into account a number of «narrow» specifics of individual industries. Purpose: development of amendments and additions to the «Rules for the formation and maintenance of the register of domestic producers of goods, works and services, as well as the issuance of an Industrial Certificate» for the subsequent possibility of obtaining an Industrial Certificate by a chemical industry enterprise for the production of mineral fertilizers. Methods: study and analysis of literary sources, statistics and modeling of the procedure for issuing an Industrial Certificate. Results and their significance: the problems of application were studied, ways to solve these problems were found, and amendments and additions to the “Rules for the formation and maintenance of the register of domestic producers of goods, works and services, as well as the issuance of an industrial certificate” were developed. At the moment, the Rules need to be carefully finalized. It is necessary to consider this issue together with authorized state bodies, associations and business representatives, since obtaining an Industrial Certificate will directly affect participation in public procurement, and, accordingly, the economy of the Republic of Kazakhstan.

The article examines the emergence and functioning of the Soviet institutions of power in Kazakhstan during the period of "war communism". On the basis of archival materials and published works, the author analyzes the activities of Soviets and revolutionary committees. The purpose of the article is to study the main trends and features of the development of local government in Kazakhstan in 1918-1921. The study is based on the principles of historical, scientific objectivity and systemic structural-functional analysis. For this reason, the author used such methods as the method of historical reconstruction for the reorganization of the administration of Soviet, party and other local bodies; the method of isolation for the study of local (regional) features in relation to local phenomena and processes in the energy sector; the method of typology, which made it possible to identify and describe different types of local authorities. The authors come to the conclusion that in 1918-1921, during the period of civil resistance, "war communism" and the beginning of the Chamber of Commerce and Industry, bodies of the new Soviet power appeared and operated in Kazakhstan. They are characterized as having an anti-democratic character; strict social orientation; alienation of indigenous peoples; immanent nature for creating conflict situations; choosing non-optimal ways and means of solving a problem situation; unification of party and state. As a result, an overgrown and clumsy class of party classification was formed, which was not provided for by the Constitution of the USSR.

Main problem: for the 2019-2021 years of the implementation of the state program, the indicator for the number of incoming visitors in the tourism sector of the region was achieved in 2019. In 2020-2021, the indicator was not reached due to the global pandemic associated with the spread of coronavirus infection by Covid-19, and therefore the attractiveness and profitability of tourism in Kazakhstan decreased. Tourism and the increasing demand for tourism services every year are becoming a source of large incomes and profits in many countries. According to the World Travel and Tourism Council (WTTC), travel and tourism is currently the largest industry in the world, taking into account the contribution to global GDP and employment. [1] The conclusions made in this paper and practical recommendations can contribute to the development of measures to improve the process of effective management and reform of the tourism industry. The purpose: to study the theoretical and practical aspects of the development of the tourism industry in the Pavlodar region. Methods: in the course of the research, the following methods were used: theoretical analysis of literature, methods of ranking, analysis, grouping and systematization of data, statistical methods. Results and their value: currently, the tourism industry of both Kazakhstan and its regions is gradually beginning to develop. The article presents the result of assessing the attractiveness of the tourism market and shows ways to expand the industry, as well as reveals the specifics of management in the tourism sector. The formulated conclusions and practical recommendations can contribute to the development of measures to improve the process of effective management and reform of the tourism industry of Pavlodar region, as well as the development of a mechanism for using tourism potential in the socio-economic development of Kazakhstan. This study is relevant, since the main task for today is the need to study the problems and challenges in the field of tourism development, which will contribute to the development of other related industries in the Republic of Kazakhstan. The development and solution of the problems of the tourism industry itself will undoubtedly lead to an increase in the opportunities of this market and the demand for services and, as a result, will affect the development of economic indicators of both regions and the whole of Kazakhstan.

As part of solving the priority tasks set in the Address of the President of the Republic of Kazakhstan Kassym-Jomart Tokayev, a significant role is given to the development of the food industry, including dairy products. Big tasks are to be solved by branch science in the field of processing raw materials of plant and animal origin using the achievements of bio- and nanotechnologies to improve the quality, biological, nutritional value and food safety. New approaches are needed to organize the complex processing of plant and animal raw materials in order to improve the economic, social and environmental aspects of the production itself, as well as the life of the population of the Republic of Kazakhstan. Despite the extensive range of processed cheeses, it is constantly updated. This is due to the need to meet the requirements of nutritional science, changing consumer demand, as well as the availability of raw materials and considerations of the profitability of a particular type of cheese. The working hypothesis of the research was the assumption that for the melting of raw materials it is possible to use reagents that affect the active acidity of the medium, stabilize the structure, bind moisture and improve the consistency and organoleptic characteristics of the finished product. The article is devoted to the issue of the process of melting rennet cheeses. The purpose of the article is to show that the melting process is closely related to different forms of raw material protein micelles. In this article, the influence of the type and amount of melting salt on the formation of the structure of processed cheese is considered, the rheological indicators of experimental products are determined in accordance with the scoring of processed cheeses. The indicator of water activity (аw) was established, the microbiological parameters of the experimental products were determined.

In Kazakhstan, within the framework of the Program «Development of domestic value and export-oriented industries», new modern dairy enterprises are being actively modernized and new modern dairy enterprises are being created, where membrane processes are being introduced to concentrate the components of milk. This is necessary for the rational and integrated use of raw materials, including through the processing of secondary resources, the main of which is whey. Improving the production processes of traditional food products and developing innovative ones is possible only with the use of the latest technologies and technological equipment. Membrane processes are widely used for the use of fractionation and concentration of liquid dairy products, which allows for a new solution to the processing of raw materials and opens up opportunities in the development of new types of food products. The article is devoted to the issue of production and processing of whey in Kazakhstan. The main types of membrane technologies and the advantages of their use in the dairy industry in the Republic of Kazakhstan are considered. The role of membrane technologies in the processing of whey is substantiated, various methods of introducing membrane processing methods to ensure the demineralization of whey, obtaining products with high biological value and consumer properties, reducing the cost of energy carriers, reducing the volume of raw materials in order to save transport costs, non-waste processing of milk solids, recycling water are described. This article analyzes the problems of using resource-saving membrane technologies in the production of dairy products in the Republic of Kazakhstan, ways to solve existing problems associated with increasing the economic efficiency of enterprises. The favorable impact of the use of membrane technologies on the social and environmental aspects of whey processing in the country is substantiated.

In this article, comprehensive studies have been conducted on the effective use of natural pastures in conditions of vertical zonality in the project territory of Batyr Korday district (Zhambyl region). The data presented shows how important it is to comply with the norms and loads of pastures for further preservation of pasture yields and prevention of degradation. Consequently, there is a need to develop effective and scientifically-based systems of pasture turnover and the introduction of measures to restore pasture lands in the Zhambyl region, taking into account the peculiarities of the climate and geo-botanical indicators. Pasture lands make up about seventy percent of the entire territory of the Republic of Kazakhstan. The potential productivity of these lands reaches twenty-five and more million tons of fodder units. Pasture is the main renewable forage plant resource. It should be emphasized that haphazard use has led to the fact that land degradation processes occur on 27.5 million hectares of pastures, feed capacity decreases, biological diversity decreases, erosion processes manifest themselves, etc. All this requires the development of science-based approaches to the exploitation of pasture resources, compliance with the basic elements of rational grazing. The current situation may have a twofold path of development. The first way is the absence of strategic initiatives for the effective use of pastures for small producers will lead to a final reduction in the feed capacity of the pastures used. And the second way is small and large-scale use of the huge forage potential of the restored pastures.

In order to successfully conduct agricultural work and obtain a competitive harvest, it is mandatory to carry out spraying operations of crops that require highly qualified personnel, expensive equipment and suitable weather conditions. The use of tractors for spraying fields is the most common solution available at the moment, has disadvantages: high cost, risk of damage to the crop by "hitting", "hooking" or otherwise; environmental damage; due to exhaust gases, the demolition of the solution increases with increasing speed. Using a device designed specifically for spraying equipment is an ideal solution. The purpose of the article is to develop a working model of an automated sprayer for processing agricultural crops. The methods used are: technical justification of a controlled device for processing agricultural crops. Calculation of functional capabilities, algorithms of operation of the proposed automated device: selection of the type of sprayer, engine, chassis, controller, battery, as well as justification of the possibilities of using alternative energy sources (wind energy, solar energy); development of a 3D model of an automation device for anti-weed processing of agricultural crops, printing of parts, assembly of mechanical and electronic parts. Making a prototype using 3D printing; development of the wiring diagram of electronics, software (firmware of the microcontroller; application that controls the settings), testing of the prototype, assembly of the current model; rationale for the optimal use of Arduino and Raspberry Pi boards in this device in a pair: Raspberry Pi will allow you to control processes on the Arduino and easily interact with the Internet when the Arduino itself will perform simple operations such as interacting with electronics and reading sensor readings. The manufactured operating model showed compliance with the goals, a high degree of controllability, environmental friendliness, reduction of energy consumed, labor resources and can be used to scale this device. The developed model of the automation device for anti-weed treatment of agricultural crops can be used not only in agricultural pollination, but also as a mechanism for studying soil parameters: humidity, mineralogical composition and chemical content in the ground, using electronic sensors, as well as an automated mobile platform for any purpose requiring accurate navigation through the territory.

On the territory of the Northern industrial zone of Pavlodar in the area of the industrial wastewater reservoir «Bylkyldak» in some areas of the earth there is soil contamination with mercury, exceeding the MPC for mercury (2.1 mg/kg) by 500 times. The total mass of mercury dispersed in the surface layer of soils is 2.8 tons. The mass of contaminated soil is approximately 208,000 tons. Pollution of the territory is historical. The purpose of the article is to determine the efficiency of chemical binding (immobilization) of mercury in the soil with the Japanese drug Denite® in real field conditions of the territory of mercury contamination in the Northern industrial zone of Pavlodar using an experimental study; to determine the stability of insoluble mercury compounds formed by the preparation at extreme winter and summer temperatures and seasonal fluctuations in open ground. Soil samples were taken for the study at 11 points in the centers of mercury pollution. Laboratory studies were carried out in an accredited analytical laboratory of the Testing Center of JSC Caustic. Soil samples were treated with Denite®, the preparations obtained were stabilized, and water extracts were prepared. The content of mercury in soils, extracts from them, and plants was determined by the atomic absorption method on a RA-915+ spectrometer equipped with RP-91 and RP-91S attachments. As a result of research, the effectiveness of Denite® in the chemical binding of mercury in the soil has been proven and its optimal dosages have been determined. As a result of the positive tests of the technology of chemical immobilization of mercury, the prospect of a practical solution to the issue of demercurization of mercury-contaminated soil on the territory of the Northern industrial zone appeared.

Main problem: the development of a new direction in the food industry – the so-called functional nutrition, which means the use of such products of natural origin, which, when systematically used, have a regulatory effect on the body as a whole or on its specific systems and organs, has been widely recognized all over the world: immunostimulants, biocorrectors for blood pressure, cholesterol levels, etc. When creating functional dairy products, ingredients of plant origin are increasingly included in recipes, which are sources of dietary fiber, vitamins and microelements, organic acids and other biologically active compounds, which can also serve as flavor fillers. Purpose: to develop a technology for the preparation of a fermented milk product with the addition of an extract from gourds. To do this, it was necessary: to select the amount (dose) of the yoghurt starter introduced into the prepared milk, and also to investigate the effect of temperature on the fermentation process of the drink; to investigate the amount (dose) of the vegetable filler introduced into the mixture and its effect on the organoleptic characteristics of the drink; to investigate the organoleptic properties of the drink with the melon culture extract added to it before fermentation and after fermentation; to investigate the effect of vegetable filler on the fermentation process; to investigate the effect of the dose of vegetable filler on the process of acid formation; conduct microbiological studies of milk and vegetable yogurt; to investigate the change in the acidity of milk and vegetable yogurt during storage; to investigate the effect of the freezing process on the chemical composition and biological value of the extract. Methods: when performing the practical part of the work, physicochemical, organoleptic and microbiological studies were used. Results and their significance: in the course of the study, it was concluded that by adding an extract of gourds to the technology for the preparation of fermented milk products, a new fermented milk product can be obtained that meets all physicochemical, organoleptic and microbiological requirements. As a result, an original method for the production of a fermented milk drink containing an extract from a melon culture was developed.

Main problem: rapidly changing trends in development of economies of countries require a rational approach to state regulation of innovative activity and investments directed to organization of real sector of the economy. At the same time, for analysis of modern state policy in the system of innovative development, it is necessary to assess the effectiveness of state regulation mechanisms of innovative activity in the economy of the Republic of Kazakhstan. Purpose: to assess mechanisms of state regulation of innovative activity in the Republic of Kazakhstan in the global competitiveness system. Methods: synthesis, content analysis, accommodation, monographic method, factor analysis, economic and statistical research method. Results and their significance: the assessment of the mechanisms of state regulation of innovative activity in the Republic of Kazakhstan in the global competitiveness system allowed to fully assessing effectiveness of mechanisms of state regulation of innovative activity in the economy. Examining the sub-indices of international rating of the World Economic Forum for 2021-2022 in relation to 2017-2018, the authors came to conclusion that in Kazakhstan today there is the decrease in all the sub-indices of rating and their factors (“basic requirements” and “business complexity”), with exception of “innovation” sub-index. This sub-index was significantly reduced due to a sharp deterioration in macroeconomic environment, which is directly related, according to the authors, to significant losses in oil export revenues. This, in turn, affected the deterioration of the state budget indicators. The article pays special attention to place and role of state regulation of innovative activity in the socio-economic policy of the country. Organizational and methodological problems in development and implementation of innovative policy in the Republic of Kazakhstan are researched in detail, which makes it necessary to solve them in order to achieve the effectiveness of innovative policy at the regional and national levels.

The article is devoted to the study of the main types of retort packaging, as well as polymer and combined materials used for its manufacture. The authors have compiled a classification of retort packaging presented on the modern market, investigated the technological properties of packaging materials, and also determined the requirements for modern retort packaging: resistance to sterilization at a temperature of at least 120°C, steam and moisture resistance, chemical inertia to canned products, tightness, low gas permeability. It has been established that in order to give the retort packaging the required properties, it is made of multilayer polymer or combined materials, each of the layers of which performs certain functions. It is determined that due to the barrier properties of polymer and combined materials with respect to oxygen, retort packaging provides shelf life of canned products up to 5 years, which allows the use of retort packaging made of polymer and combined materials as an alternative to glass and metal packaging. In experimental studies, the composition of the outer layers of modern retort packaging was analyzed and it was concluded that polypropylene or polyethylene terephthalate are most often used, since these polymer materials are thermally and chemically resistant, vapor- and moisture-proof. It is established that materials that are barriers to gases are used as the middle layer – aluminum foil, metallized films, ethylene vinyl alcohol, polyamide. It is proved that polymer co-extrusion, multilayer injection molding or lamination is used for the manufacture of such materials and packaging. The data obtained indicate the high barrier properties of combined packaging materials, therefore, the thermal and chemical stability of the polymer and combined materials used makes it possible to use retort packaging for packing almost all groups of canned products.

Main problem: the article substantiates the relevance of the development and production of specialized food products for athletes and the population involved in sports, fitness as part of a healthy lifestyle. Purpose: development of specialized food products with a general health-improving character, intended for the population involved in sports, fitness and experiencing increased physical exertion. Methods: the obtained results were statistically processed using the methods of correlation and regression analysis and standard software packages "Statistica 6.0". Measurements of chemical, microbiological, organoleptic parameters were carried out using standard methods and modern instruments: an analyzer, an analytical analyzer electrophoresis cell, a high-performance liquid chromatograph, and others. Results and their significance: a scientific concept for the creation of fermented specialized milk-based food products for sports nutrition was formulated; biotechnologies for specialized food products for athletes were developed. For the practical implementation of the results of analytical and experimental studies, packages of regulatory and technical documentation for the production of new products have been developed, which have been tested in the production conditions of existing enterprises in the dairy industry.

Main problem: one of the officially recognized problems of the system of state planning and regional development is imperfection of the methodology for assessing the effectiveness and efficiency of the implementation of the activities of state bodies. In fact, there is no assessment of economic and social efficiency and an assessment of the impact on society. In this regard, the authors have developed methodological approaches to assessing the quality (effectiveness) of state programs (on the example of the program of the Republic of Kazakhstan “Employment Roadmap – 2020”) that is the urgent task for theory and practice of regional development. Purpose of the research is the investigation of the methodological foundations for evaluating the quality of implementation of state programs of the Republic of Kazakhstan in the field of employment (based on the materials of program of the Republic of Kazakhstan “Employment Roadmap 2020”). Methods: the article uses a systematic approach to solving problems that ensures the unity of qualitative and quantitative methods: qualitative content analysis; a monographic method; the method of economic and statistical research. Results and their significance: the value of the study lies in the fact that methodological approaches to the evaluation of programs in the public administration system are identified. For an economic assessment involving the calculation and analysis of unit costs per program participant, the authors propose to conduct dynamic and comparative analysis of the values of unit costs for achieving final results in directions of “DKZ-2020” program. This will allow to compare individual projects and program areas by costs in dynamics and further to identify those factors that work for their unjustified growth. The calculation of presented indicators is also important in regional context, since it allows considering those.

Main problem: in Kazakhstan, the Government is reviewing its environmental and health management system to identify opportunities for improvement. Kazakhstan suffers from a high level of emissions into the environment and related health problems of the population. The link between environmental pollution and public health has been established for a long time. In Kazakhstan, air pollution, water pollution and soil and groundwater pollution are the main causes of widespread health problems and diseases, including, but not limited to, lung diseases and certain cancers. Recognizing these problems, the Kazakh Government is trying to strengthen environmental protection and environmental management system. Purpose: the purpose of the study was to analyze international models, practices, application of management systems for the legal protection of the environment and the health of citizens with application in Kazakhstan. Methods: the article discusses and explores a number of principles and methods of environmental management. Since these principles and practices contribute to the establishment of rational and effective environmental policy and management, it is proposed to take them into account when rethinking the current system in Kazakhstan. The article analyzes models and methods of legal protection of the environment and response to damage to the health of citizens, these tools can be part of an integrated system. Results and their significance: based on the study, it was found that in order for environmental management to reach its full potential, Kazakhstan also needs to undertake political reforms and involve ordinary citizens in the formation of policies and protection mechanisms. The studied strategies for collecting and taking into account the opinions of people when making managerial decisions on environmental protection can be used in Kazakhstani society.

Market transformations in the Republic of Kazakhstan and in the regions have entered a phase of intensification: management systems and resource allocation have been fully improved, the institution of public-private property has been formed, the main market mechanisms of economic regulation have been put into effect. The mechanism of self-development of the market as a whole is gradually being launched, small business is becoming crucial. It is free entrepreneurship that is designed to intensify the further economic recovery in the regions of the Republic of Kazakhstan. Balanced and progressive development of small business involves the development of infrastructure that stimulates the activity of its development and requires the transformation of the mechanisms and format of integration of the sphere of small and large business, as one of the fundamental factors of balanced development of small business in the leading sectors of the economy. In the Republic of Kazakhstan, the support of the small business sector is one of the strategic priorities of its development. However, despite the measures taken by the state to provide support to small businesses, the dynamics of needs and industry-specific features of the development of the market of goods and services make their own adjustments to regional trends in the development of small business, forming an industry and structural imbalance in the development of small business, which requires consideration and clarification of their content. Purpose is to study the state and trends of small business development as a factor affecting the efficiency of the economy and social stability of the population. The analysis of small business development in the article is implemented on the basis of the information and statistical base of the Republic of Kazakhstan in the context of identifying trends and patterns of its development; identification, generalization and justification of the reasons for their formative and institutional approaches to their regulation. In particular, the analysis in the study is based on the materials of statistical reviews and their analysis using methods of grouping, generalization, logical analysis, system description and interpretation. The range of main directions and trends in the development of small entrepreneurship in the Republic of Kazakhstan has been studied and determined, their effectiveness has been assessed and tools to support the balanced development of small business have been proposed.

Main problem: Monitoring the reliability of the foundation of roads, buildings and engineering structures is an important aspect of geophysical research. Modeling of geological heterogeneities is relevant. Moreover, the use of computer modeling in this problem is associated with computational costs. Purpose: Analysis of the vertical electrical sounding (VES) method for modeling the physical properties of soil and their changes when exposed to elastic vibrations. Methods: To achieve the goal, the vertical electrical sounding (VES) method was used, using a one-dimensional model of the geological environment. The direct VES problem was solved by calculating the Hankel integral. Results and their significance: The study made it possible to model a large number of soil layers using the VES method. The results obtained make it possible to determine the parameters of detected objects and changes in the characteristics of the controlled environment when exposed to elastic vibrations. The significance of the results lies in the possibility of improving the method for modeling the physical properties of soil and taking into account their changes under the influence of elastic vibrations, which helps to increase the efficiency and accuracy of monitoring the reliability of the foundation.

The article is devoted to the development of technology for meat products of the "Halal" category. The authors consider the main problems of the meat industry in the field of the development of meat products of the "Halal" category in accordance with the National Program "Development of meat farming for 2018-2027", as well as the peculiarities of the production of meat products of the "Halal" category in Kazakhstan. A technology for the production of sausages for frying of the "Halal" category based on minced turkey and beef meat for functional nutrition has been developed, organoleptic, physico-chemical parameters of the new product have been studied. The mass fraction of protein is 8 %, the mass fraction of fat is 7 %. The authors of the article have developed a technological scheme for the production of a new product of the "Halal" category, which includes: acceptance of raw materials, cutting, deboning, veining, grinding to 2-3 mm of meat raw materials. At the next stage, meat is cooked at t 2-4 0C for 12 hours, minced meat is prepared (adding jerusalem artichoke 3 %, adding vitamin premix "Rovifarin" in an amount of 1.0 %, as well as spices and garlic according to the developed recipe). At the next stage, the minced meat is stuffed into natural shells with a diameter of (32-44) mm, cooled at t (4 + 2) 0C, stored at t (4 + 2) 0C for 36 hours. During the microstructural study of a sample of boiled and smoked sausage produced using traditional technology, it was found that the mass of the sample was formed from large fragments of muscle, fat and connective tissue (0.7-1.4) microns. The layout of the structural elements of the minced meat is dense, vacuoles and microcapillaries are rounded in shape, sometimes without clear boundaries, merged, with a size of (60-300) microns.

The development, grovth and productivity of livestock depend primarily on providing it with a variety of nutritious feeds. Daily feeds should consist of microbiologically synthesized protein, as well as a variety of seeds, mineral and vitamin supplements of animal and vegetable origin. Indeed, the maximum disclosure of the genetic potential of livestock largely depends on both the quantity and quality of feed. One of the stages of feed quality assessment is the measurement of their chemical composition. The chemical composition is not always constant and depends on many factors, including the species composition of plants, fertilizer application rates, climatic conditions and storage methods. The least accumulation of moisture in the soil was observed in areas where pasture grasses were regularly treated with wormwood. Pacture productivity was also the lowest in the control plots, where the average phyto-chemical composition over three years showed that the dynamics of protein content was the same in all pastures – the protein content reached a maximum at the beginning of the growing sea son and decreased from spring to autumn, while the lowest content of crude protein during harvesting in summer was in control plants of varieties

Main problem: Rapidly changing trends in development of economies of countries require a rational approach to state regulation of innovative activity and investments directed to organization of real sector of the economy. At the same time, for analysis of modern state policy in the system of innovative development, it is necessary to assess the effectiveness of state regulation mechanisms of innovative activity in the economy of the Republic of Kazakhstan. Purpose: to assess mechanisms of state regulation of innovative activity in the Republic of Kazakhstan in the global competitiveness system. Methods: synthesis, content analysis, accommodation, monographic method, factor analysis, economic and statistical research method. Results and their significance: The assessment of the mechanisms of state regulation of innovative activity in the Republic of Kazakhstan in the global competitiveness system allowed to fully assess effectiveness of mechanisms of state regulation of innovative activity in the economy. Examining the sub-indices of international rating of the World Economic Forum for 2021-2022 in relation to 2017-2018, the authors came to conclusion that in Kazakhstan today there is the decrease in all the sub-indices of rating and their factors (“basic requirements” and “business complexity”), with exception of “innovation” sub-index. This sub-index was significantly reduced due to a sharp deterioration in macroeconomic environment, which is directly related, according to the authors, to significant losses in oil export revenues. This, in turn, affected the deterioration of the state budget indicators. The article pays special attention to place and role of state regulation of innovative activity in the socio-economic policy of the country. Organizational and methodological problems in development and implementation of innovative policy in the Republic of Kazakhstan are researched in detail, which makes it necessary to solve them in order to achieve the effectiveness of innovative policy at the regional and national levels.