Article is devoted to studying the issues of foreign language education and the main approaches to realizing its structure. In this regard the scientific polemic about development of foreign language education and methods of teaching languages is analyzed. Authors recognize the fact that the strategic objective of foreign languages training consists in development of "secondary language personality" properties of the students. In this context the communication of the concept "secondary language personality" with two types of competences that is foreign language and cross-cultural and communicative ones is proved.

The purpose of this article is to review the main possible areas of international cooperation of the law enforcement agencies of the Commonwealth of Independent States in combating human trafficking. The authors, based on an analysis of the existing international instruments to combat trafficking in persons, reveal details of the main directions of the international cooperation of the CIS countries’ law enforcement bodies, implemented through: the partial transfer of competence, a joint investigation of criminal cases, as well as the extradition of a person for criminal prosecution.

The development of the oil refinery is directly related to the peculiarities of the socioeconomic environment, which is determined largely by the favorable conditions of activity of all branches of economy of the Republic of Kazakhstan, a stable regulatory processes of all normative -legal framework of implementation of market reforms and efficiency of making management and innovative solutions in the oil refining industry of the Republic of Kazakhstan. Currently, a lot of efforts are being made to scale modernization of all production processes, as well as modernization of equipment of the oil refining complex of the country

The article discusses a way to increase the efficiency of automobile operation by improving methods for ensuring the operability of electrical equipment based on the diagnosis of generators by output voltage. As a diagnosis, it is proposed to perform a spectral analysis of the generated voltage in idle mode and to determine the state of various generator elements from the results. The effectiveness of the proposed solutions is determined by the non-separable diagnostics of the generator, which, based on a thorough examination, can determine the state of various elements of the generator. This method does not require taking the generator out of operation, does not depend on its design and can be used in difficult operating conditions to obtain preliminary information about the state of the generator at the initial stage of maintenance.

Risk map as a tool of the effective management of the company, the goal of a risk map, methods, quantitative evaluation and modeling of risk maps for the successful activity of organization are viewed in this article.

The article describes the background and forms of tactical thinking development of professional basketball players. Authers pay attention at work process of tactical thinking based on sportsmen age.

In work characteristics of the mixing device of new type and principles of its work are given. The geometry of liquid, stream has been ivestigated arising in a tank when operating. Offers of rationalization character were brought.

The article is devoted to the issues of residential buildings`s reliability and durability. The paper deals with the challenges in the estimation of a technical condition of frame filling bearing walls, presents the comprehensive survey methodology for buildings. The article announces the questions on physical and moral wear of frame filling bearing walls.

This article contains synopsis of some aspects of the consteructionand operation of grid-systems, in order to give an idea of this technology. It also contains the list of existing projects, to demonstrate this technology potential

The study consonants in Azerbaijani linguistics began in the first half of the 20 century, many issues related to the statistical physiologically-acoustic, phonological analysis of consonants have been solved. In this regard, of particular importance are studies of B.Chobanzade, F.Kazymova, A.Demirchizade, A.Kurbanova and especially of A. Akhundov. After analyzing the work on phonetics and phonology of the Azerbaijani language, the author came to the conclusion that more questions were studied concerning phonetics of consonants.

In given article features of working out the user's guide for the software «The salary and employees» are considered. The author studied appointment and user's guide structure.

The article presents research of telemetering, remote control and regulation abroad and in Kazakhstan. The necessity of this line of research in our country.

The article is devoted to the guestions of education at teenage period as the most effective and active period of teenagers personality’s formation. The author observe the special meaning of art education and the posibility of influence of the spiritual and moral culture at teenagers development.

In this article studied about difficult built patriotism in military educational institute. As for studied early waves, future and concept of process in military patriotism sense cadets.

The analysis of psychological and educational literature on the adaptation of first-graders in a music school - a boarding school for gifted children. The author focuses on the necessity of modern technology and necessity of specialized school for gifted children in optimization the adaptation process of first-grade children.

The methodological approach based on comparison of these statistical regions of Republic of Kazakhstan is considered in this article. The comparative analysis of basic indexes of socio-economic development of the Pavlodar area is Given.

In the article it is grounded that a shadow economy is an inalienable element of the economic system based on the market. Traditional and new determinans of shadow economy formation are distinguished in the Customs Union countries appeared due to the reforms of the last decade. The factors of shadow economy are determined; their modern classification is given.

Theoretical and practical aspects of quality management of teachers’ continuous education, main tools, methods, approaches and trends in the monitoring development in qualification increase system are considered in the article. The research has been carried out by a case study of «Orleu» Institute of teachers’ training in Pavlodar region».

Theoretical aspects of preschool children speech development by means of theatricalization are highlighted in the article which is understood by the authors as purposeful pedagogical activity providing effective learning of mother tongue vocabulary. A number of games classifications are analyzed that make up the theatrical activity. Emphasizing that the theatrical activities can be organized in different areas of work with children of preschool age the authors reveal issues of these areas.

The main condition for purposeful forming of students educational potential of speciality 5В010200 «Pedagogics and primary education methodology» is introduction of the special course «Development of educational potential of primary school teacher» into the curriculum. The conducted work is briefly described in the article on the level determination of educational potential components formation for future primary school and method of its forming.

In this article the author examines the characteristics of nomadic Eurasian states. The authors believe that any dynasty in nomadic state has a beginning and an end elevation. The beginning of the end of the dynasty, is the eighth generation descendants.

This article discusses the possibility and practice of Kazakhstani enterprises producing chemical products and raw materials, which are oriented to export regulations REACH, adopted by the European Union that will greatly increase the safety and competitiveness of domestic production.

This article discusses some of the problems of chemical safety, such as the recycling of waste production, chemical accidents and disasters, environmental pollution and the negative effect of the chemical industry on human health, as well as methods for safer handling of chemical products.

This article examines the theoretical aspects of the artistic picture of the world as process of authorial design of objective reality.

This article describes theoretical and practical aspects of regional media, particularlies of media for teenagers, functions performed by the print media, as well as intensive development of regional youth media by the example of the regional children and youth newspaper “Your world”. The authors presented expectations analysis of youth readers.

This article views the problem of professional readiness of a future teacher to the professional work. Much attention is given to the contemporary social and economic situation and the increasing role of the system of education. The readiness of a future teacher to the professional work is presented as a system containing such components as motivation, knowledge and skills. The conditions necessary for improvement the training of future teacher to their professional work have been specified.

This paper evaluated the governance of the social sphere of the Pavlodar region. Based on the analysis of the main social indicators, identified the strengths and weaknesses of the region in this area, as well as identify opportunities and threats that affect the development of the region as a whole. In a changing social and economic relations, the issues related management and development of a regional social complex. Their decision depends not only on the success of social reform, but also the normalization of the socio-political situation in Kazakhstan.

In the given article there presented the ranking score of the regions of the republic based on the main socio-economic indicators. Besides, there made a ranking on a ratio basis of the regions in the gross regional product of the country. The comparative analysis of the rating positions let us determine the causes reducing the growth of competitiveness of the region.

According to the “Productivity 2020” Program passed in the Republic of Kazakhstan, the target indicator till 2020 is doubling the labour productivity at the manufacturing plants. Onу of the intensive factors of the labour productivity development is effective motivation of the labour activity. In the article there are described the principles of formation of the labour activity motivation at the industrial enterprises which are reflected in various concepts of motivation and stimulation of human resources.

The building contain, contain is one of the basic meaning of the development of the person and the forming of his basic culture. The authors searched the incompatibility between the definite aims of the building and the curriculum and between the curriculum and the pupil’s book. In this article the working curriculum at the Oktyabrsk secondary school with due regard for the variation components and with due regard of the pupils’ age feature and the material and technical basis are considered. There is also the explaining of the curriculum organizing in this article. During the selection of the contain of the variation components the common didactics criterions which are formulate by Y.K. Babanskiy are suggested like the base.

This article describes the concept and the role of a strategic approach to family counseling. Currently, the strategic approach to family counseling is the most common type of psychotherapy in the family. The article compares the strategic approach to the systemic and structural approach to family counseling. This method of family therapy focused on problem solving and psychotherapists this area do not focus on personal features of family members, are not intended to achieve the client or family insight.

This article describes the theoretical and practical aspects of peculiarities of development of creative abilities of pupils in primary and secondary schools of the state institution "School-Lyceum №8 for talented children" of Pavlodar". The article proves the need and possibility of use in extracurricular activities of the course "Art therapy" to enhance the level of development of creative abilities of pupils. During the experiment it was proved that not only creative abilities, but emotsionalno-volitional sphere develops in the process of studying the material in this course. The findings suggest that creative abilities of pupils of elementary and secondary fcoli develop in activities.

The paper presents a description of the nature and content of the social psychological health of the family and its main indicators, the basic laws of the development of social psychological health of the family. On the basis of the psychological analysis of the conditions of life and well-being in the basic functions of life are revealed properties, levels of social psychological health of the family. In the above method of diagnosing mental health of the family sets out the scope, procedure diagnostic approaches to the study of her condition, are considered diagnostic problems obtaining psychological information about the family, the practical application of methods of diagnosis of mental health of the family, as well as data processing and interpretation, the formation of the diagnosis and recommendations.

The reseаrch views the meаning оf music аnd sоngs in English leаrning, cоncepts оf slаng аnd it’s аpplicаtiоn. The using оf music аnd leаrning оf sоngs increаse the mоtivаtiоn in English leаrning. Schоlаrs hаve leаrned thаt musicаl eаr, аttentiоn cоnnects with the develоpment оf аrticulаtive аppаrаtus. Leаrning аnd singing shоrt sоngs helps tо remember аrticulаtiоn, stress, prоnunciаtiоn оf sоunds аnd wоrds. Аccоrding tо lаst invаsiоn which hоld in vаriоus cоuntries, children аnd teenаgers mаster fоreign lаnguаges better. Using music аnd leаrning slаng thrоugh sоngs unite persоn аnd English culture. Аnd it is аn impоrtаnt fаctоr оf increаsing interest tо lаnguаge leаrning оn the different stаges оf аdulthооd.

In the article the main issues and trends of agricultural biotechnology development in Kazakhstan, prospects of biotechnology application in the production of agro-industrial complex of the country have been considered. Data has been presented on: what researches are being carried out by scientific organizations in the field of agricultural biotechnology with attraction of leading foreign scientists and scientific organizations; what recommendations for technologies have been developed and what new biotechnological products have been created in all branches. Promising technologies in the field of biotechnologies in AIC for Kazakhstan as well as keys to the success in the development of science and technologies in AIC have been indicated.

In this article essential pedagogical conditions for formation of patriotic culture of future teachers are considered. The regularities and principles of the model are revealed. Designed model allows representing the process of formation PCFT as a dynamic system with reasonable and open internal structure which reflects the unity of its components.

This article is devoted to the problem of deviant behavior of teenagers; it reveals the influence of external factors on the development of deviations of teenagers and offers to conduct the preventive work in a complex in early stages of development of deviant behavior. The factors and circumstances specifying the demonstration of deviation have revealed. The development of school policy aimed at the organizing the social and pedagogical conditions neutralizing and correcting negative impact of the social crisis has been suggested.

This article discusses some of the practical application of cavitation technologies in autonomous heating systems, attached elementary economic calculation. The modern achievements and cavitation vortex heat generators, principle of operation and types of such equipment. Marked positive and negative aspects of installation and operation of heat generators. A comparative analysis of the economic calculation of seasonal operating costs of the vortex heater as auxiliary heating systems and district heating tariffs for Pavlodar.

Development of a communicative competence of a child is a crucial task of educational process of preschool institution. The article describes the problem of communicative competence of preschool children. At the preschool age, the main task of the teacher is to educate an all-around intellectually developed and communicatively competent person.

Education is one of the priority directions in the development of our state. It is impossible to talk about modernization of education without monitoring its quality. The article considers a differentiated approach to learning, the conditions under which this approach can be applied. Two main criteria of the differentiated approach are singled out: level of training and learning ability. The article gives recommendations on the phased implementation of differentiation. Positive and negative parties of different types of control of education quality are also presented. Most objective is the differentiated test control. The article reveals its characteristics, the possibilities of using it in lessons in primary school.

The renewal of the paradigm of 12-year education is associated with the formation of key competencies in students that help to learn, understand and develop the world around. The developed set of tasks is designed to develop the need to transform educational material with the aim of improving the quality of education. This material is compiled in accordance with the age characteristics of primary school students, is aimed at organizing the processes of mastering new ways of acting, which will contribute to the formation of educational and cognitive activities. The issues discussed in the article will allow us to implement a competence approach in the education of students. The tasks presented in the article are intended to activate the educational motivation, the organization of independent cognitive activity, contribute to the systematization and objectification of the processes of monitoring and evaluation of educational activities.

The approach which was proposed earlier for composite materials strength prediction using contact angle measurements was applied for graphite laminated materials. It was shown that the calculation of the work of adhesion to polar and non-polar model liquids can be applied to the choice of polymer binder.

In the article different methods of diagnosis of failures of electric equipment which are most often found in the industry today. The classification of methods for diagnosing motor failures is presented, and the advantages and disadvantages of existing methods for diagnosing failures in electric equipment are revealed. Based on the description of the methods of diagnosing electric equipment failures, a comparative table was compiled. Analyzing the comparative table of methods for diagnosing failures of electric equipment, the most current method for diagnosing the technical condition of the electric motor was determined.

The article presents a study of the effect of a resistor in a network neutral point from 6 to 35 kV on the conductive electromagnetic interference with the ground-fault current. A mathematical model is proposed.

The article presents an analysis of an Advertising World Model through a description of spatio-temporal and subject-object characteristics of the World Model, formed by Commercial Television Advertising. For the description of an Advertising World Model, the authors have conducted a content analysis of commercials broadcasted at “Pervyy kanal “Eurasia.” According to the authors, by impressing specific values, the advertisement thereby promotes a certain way of life. The authors consider advertising as a means of manipulating the mass consciousness. The paper presents an analysis of manipulation of needs; “spiritual” manipulation – generation of certain ideals and values; intellectual manipulation; feeling manipulation, etc.

The article is devoted to the analysis of the concept of "smell" in Russian linguoculture. Each culture has its own specific smells, which are dominant for the bearers of a particular culture and become the identification marks of the ethnos, helping to convey the beauty and depth of the language. The article deals with phraseological units expressing the attitude of different cultures to smells, characterizing through the smell the personality of a person, its behavior, actions, age, state of health. The author of the article notes that smells have culturally relevant values.

The article is devoted to the consideration of the level of conflict interaction of spouses at different stages of marriage experience. The results of the investigation of the conflictness of the marriage partners at different stages of family life. The authors describe the nature of the interaction of the spouses, as well as a comparative study of the level of conflict between the groups of respondents with different marriage experience.

The purpose of this work is to create an information system that promotes Kazakh language popularization in social networks. Kazakh language usage analysis in the Internet had been made. The database and software with a bilingual interface that generate and send messages in the Internet has been developed. Increasing Kazakh language popularity methodology using a messenger program is also suggested.

This article considers the theoretical application of measures to increase the efficiency of electrofilters installed at the electric power plant of "EEC" JSC. The author has identified the reason for the inability to achieve the efficiency of electrofilters close to 100%. Methods for increasing the efficiency of electrofilters for equipment installed at the electric power plant of "EEC" JSC are considered.

The article considers the influence of the level of feelings of guilt on self-actualization of the individual. Research has been carried out to identify the relationship between the index of propensity to sense of guilt and the degree of self-actualization, on the basis of which the analysis of results and conclusions on the experiment are presented.

The presented work describes the concept of education of the XXI century, which is based on its quality and the leading role in culture and spirituality, education, in the implementation of innovations. It also points to such priorities as self-development and self-education, which are the basis of the modern educational paradigm. Organization of research activities of students is considered as a powerful innovative educational technology.

This article examines the mechanisms of financial support for students at Innovative University of Eurasia, the conditions of financial support for students and ways to solve them.

This article considers chemical safety as a system of measures aimed at protecting vital human interests against adverse chemical effect from threats of processing, storing and destroying hazardous chemicals. Chemical safety is ensured by a complex of legal, organizational, financial, material and informational measures intended for prevention and elimination of real and potential security risk, mitigation of their consequences.

In this article on the materials of "Gamma" LLP and with the help of Rational Rose visual modeling of processes for automation of the service center is conducted.

The article is devoted to the current problem of quality control and safety of dairy products. The article provides a generalized description of the system models, discusses the main problems and advantages in implementing the quality control system in small and medium-sized dairy enterprises.

The article is devoted to risk analysis, methods of ensuring dairy products safety. Furthermore, the author dwells on such tool of quality control as a decision tree. The article presents the plan of HACCP for a diary enterprise on an example of the production a sour cream with 15-20 % of fat content.

The variants of the use of carbon as a heat-generating material in the agro-industrial complex are highlighted. This will significantly save energy, improve the environment, reduce the cost of operation, repair and maintenance of buildings and structures.

The aim of the article is to analyze the study of cultured mushroom «Oyster mushroom». On the basis of laboratory experiments on the grown mushroom recipes of meat semi-finished products with its use are developed. After passing laboratory tests, meat products were recommended for population nutrition. The healing properties and ease of growing a cultivated mushroom are noted.

School readiness issues are addressed by educators, psychologists, special education teachers, and physicians. Recently, the law on compulsory school attendance for all children at the age of 6 has been adopted. In this regard, there arises the question whether six-year-old children are ready for school. Will they be able to meet the requirements of school educational program at the proper level, or only by overworking and tiring themselves both physically and psychologically they may adhere to the desired level of education.

This article discusses the methodology for assessing the education system of the Republic of Kazakhstan using international tools and government programs that are currently in operation, as well as the causes and consequences of measures aimed at improving the indicators and results of the transformation of the education system. The mechanisms of creating an independent education system as a public institution are considered

The possibilities of using controlled transformer-type shunt reactors at power grid substations to optimize the transmission mode are considered. The laws of voltage regulation, providing the mode of natural power and reduction of active power losses in the electrical system, are highlighted. Key words: energy complex, controlled transformer-type shunt reactor, voltage stabilization, thyristor voltage controller, control winding.

An important role in solving protein deficiency is the rational use of secondary raw materials in the food industry. The authors found the optimal combination of proteins of dairy, meat and vegetable origin. The balance coefficient of amino acid composition was chosen as the optimization criterion

The article presents information on the creation of conditions for school students to create biological concepts in conditions of bilingual education, describes the experience of using pedagogical techniques in the CLIL methodology

The study of the structure of matter is one of the main tasks of chemistry. The problem can be solved with the help of graph theory, which allowed us to find an unexpected way to solve our logical problem. Thus, the aim of our article was to master the theory of graphs for constructing the structural formulas of organic compounds. Prediction of chemical reactions, the possibility of systematization and study of the essence of basic chemical concepts, such as structure, configuration of atoms and molecules, confirmation, isomerism, and, undoubtedly, the quantum-mechanical basis of the interaction of molecules, all this is possible using chemical graphs. Graph theory allows a non-standard way to approach the problem of constructing the structural formulas of molecules of organic compounds.

This article discusses the problems of the participation of initiative groups of citizens in creating a favorable atmosphere in the economy of the Republic of Kazakhstan, as well as the causes and consequences of these activities, discusses and suggests ways to create a sustainable, self-sustaining system of youth entrepreneurship as a socio-economic institution.

During the preparatory activities for the preparation and conduct of the KShU, the civil defense plans for peace and wartime were adjusted and clarified, the calculations of forces and resources for conducting emergency response activities were refined and their readiness checked. Checked the combat readiness of the units taking into account work in extreme conditions and the provision of personnel with equipped interchangeable clothing. Additional briefings have been organized on compliance with safety measures for fighting fires and performing emergency rescue operations. Autonomous sources of energy supply, stocks of material and technical, food reserves were checked. In general, the forces and facilities of the units of the Service are on daily round-the-clock alert duty and are ready to meet the set tasks for eliminating emergencies and situations at the first alert.

In accordance with the law on education, the Republic of Kazakhstan guarantees the equality of the rights of all to receive a quality education, taking into account the intellectual development, psychophysiological and individual characteristics of each. The article is devoted to the analysis of the development of inclusive education, the problems on the path of introducing inclusive education are considered, the analysis of the experience of conducting an IT school in the framework of inclusive education is given. An attempt was made to identify factors contributing to the successful implementation of inclusive education methods.

In the light of reforms in the field of education in Kazakhstan, it is necessary to revise approaches to meeting the cognitive needs of students, taking into account their abilities and motivation to learn.Special attention should be paid to children who have increased motivation to learn and pronounced abilities in certain school subjects. These are the so-called "Olympians". The article proposes a solution to the problem that arises in every secondary school, namely, how to teach such children to promote their optimal development. The authors of the article analyzed the work of secondary schools and, on its basis, identified positive and problematic aspects. To solve the identified problems, the system of work of the school in the direction of work with children with increased motivation for learning and gifted children was proposed: a cyclic plan of the school, recommendations on the organization of the school of the Olympic reserve, a strategy for training a selected group of children was proposed

The article presents the rationale for the use of fermented milk products containing probiotics and prebiotics for the prevention of diseases of the gastrointestinal tract. A method for preparing a functional fermented milk drink with prebiotics that helps normalize the intestinal microflora is also presented. The urgency is due to the wide spread gastrointestinal diseases among the population of the Republic of Kazakhstan, due to lack of nutrients essential for development of normal intestinal flora, and also with the instability of some types of probiotics, which reduces the efficiency of their use.

This article discusses both the main and additional costs associated with the movement of goods from the manufacturer to the consumer. The tasks for achieving optimal efficiency in the activity of a commercial enterprise in modern economic conditions are defined. The analysis of the dynamics of the sales market of the studied enterprise is carried out. Both positive and negative aspects of the trading enterprise are revealed.

Annotation. The research topic is directly connected with the solution of the nationwide issues of the social and labor policy of the Republic of Kazakhstan, based on the globalization and regional processes in the world, the experience of its implementation in the regions and, first of all, in the Eurasian Economic Union member-states. Another important factor is the comparative consideration of social policy and labor potential of Kazakhstan, Russia, Belarus, Armenia, Kyrgyzstan taking into account national and common interests. At the present stage, the issues of illegal labor migration and human trafficking in our country are given special attention. The main aim of the research is developing recommendations and proposals, aimed at further progress of the legal framework for cooperation in the social and labor sphere and the social protection of labor rights as a promising area of legal science and as an important line of social and integration policy. The research also aims at the research and examination of human trafficking and labor migration as a social phenomenon in the EAEU countries, the study of methods and techniques of combating it, and the development of recommendations for improving legislation and strategies to counteract this social phenomenon.

In the article presents the results of studies on the effect of temperature and pressure on the chloride sublimation of zinc and lead from converter dusts of steel production. Currently, an objective necessity is the development of dust utilization technologies for converter steel production, with its further use in production and production of by-products. The use of dust allows not only to save natural raw materials, but also increases production efficiency and improves the environmental situation. The content of non-ferrous metals in dusts makes it difficult to process and use them in agglomeration or in blast furnace production, while the iron content in converter dusts (sludges) makes it possible to use them as promising metallurgical raw materials. Therefore, for a more complete processing of dusts, extraction of non-ferrous metals from them is proposed. The purpose of this work was to determine the possibility of extracting zinc and lead from sludges of the converter production by the method of chloride sublimation. We used dust containing: 86,3 % Fe2O3, 3,5 % FeO, 0,9 % Al2O3, 1,6 % CaO, 0,9 % MgO, 1,1 % MnO, 0,8 % SiO2, 4,4 % ZnO, 0,5 % PbO. The study was conducted in the temperature range 200-1600 degrees C and pressures of 0,01; 0,1 and 1 bar based on a complete thermodynamic analysis using the HSC – 5.1 software package. Finnish metallurgical company Outokumpu, based on the principle of minimum Gibbs energy. According to the results of the studies, it was found that, at normal pressure, lead chloride sublimationbegins at a temperature of 600 degrees С, and zinc - at 900 degrees С: a decrease in pressure to 0,01 bar reduces the temperature to 500 degrees С and 700 degrees С, respectively; lead chloride sublimation under equal conditions is more complete than zinc; To achieve zinc chloride distillation at the level of 90-96 %, the process must be carried out at 1145-1200 degrees С and pressure from logP = -2 to 1,2 bar, while the degree of lead chloride distillation is 99,8-100 %.

This paper presents the results of the influence of ultrasonic treatment in the cofermentation of the cattle manure mixture (cattle) with the leaven from the rumen of ruminants on the process of biogas production. Anaerobic digestion was carried out in matinence periodic operation at the mesophilic temperature of 38 C ̊. As a substrate, a mixture with a content of 70 % cattle manure and 10 % leaven from rumen of ruminants was used. Treatment with ultrasound of the mixture was carried out at an intensity of 10 W/cm2 and an amount of input energy of 9350 kJ/kg of dry matter (DM), which completely eliminated the processes of stratification and sedimentation. Decomposition of organic matter (OM) in the periodic regime with the enzyme and ultrasound treatment occurred within 8 days, the usual substrate during this time OM decomposed 3.0 times less (only 14 %). The process of fermentation of methane in continuous and periodic modes treated with ultrasound, as at other temperatures, was stable, as can be judged by the values of volatile fatty acids (VFA) Volatile fatty acids (VFAs), alkalinity, pH, and biogas. The energetical efficiency of methane fermentation is estimated by comparing the volume of fuel (biogas) and heat consumption for technological needs. As shown by the comparison of efficiency of different regime, the largest amount of commercial energy in the form of biogas was obtained in the mode of joint fermentation of a mixture of cattle manure (cattle) with a ferment from the rumen of ruminants treated with ultrasound – 3 times more than without treatment (space).

Among many environmental conditions that affect a person, the most important factor is nutrition. Today, there is no doubt that there is a direct link between nutrition, health and disease. Proper nutrition ensures normal growth and development of a person, contributes to the prevention of diseases, has a positive impact on life expectancy and creates conditions for adaptation to the environment. A very actual topic for public catering in the Republic of Kazakhstan, namely for fast food companies, is the development of new recipes and culinary products from relatively inexpensive vegetable raw materials, as well as qualitatively new food products with a purposefully changed chemical composition. One of the main ways of solving problems of expanding the production of products for quick service, as well as products for dietary and therapeutic and preventive nutrition is the use of sprouted grains and beans. In this article, poly-grain mixtures of sprouted wheat and extruded soy beans in different ratios are studied and considered. Poly-grain mixtures developed by us are balanced in nutrients, vitamins and amino acids. The research was carried out on the basis of the accredited testing laboratory of RUBICOM enterprise LLP and the scientific laboratory of the Innovative Eurasian University. The purpose of this work is to study a promising method for increasing the nutritional value of grain mixtures by extruding them at different temperature conditions. To achieve this goal, the following tasks were planned: – to study the grain of soy beans and sprouted wheat on the organolepti c characteristics and chemical composition of the poly-grain mixture; – examine the chemical composition of the poly-grain mixture before extrusion; – choose the optimal mode of the extrusion process; – study and analyze the chemical composition of poly-grain extruded mixture; It should be noted that we have developed for the first time the optimal technological mode of extrusion of poly-grain mixture from sprouted wheat and soy beans, and the physical and chemical composition of the poly-grain mixture was studied. The results of the research presented in this paper are the basis for the development of recipes and technologies for fast food products. The reliability and validity of scientific statements is confirmed by the choice of modern methods of chemical composition analysis.

Gennady Beshkarevis a poet, novelist, publicist, memoirist who lived in Pavlodar for some time in the 30s of the last century. Among other things, in his creative heritage there are memoirs of artistic and historical interest "Pavlodarskiyebyli". In this work, in an artistic and journalistic form, social and everyday pictures are vividly conveyed, which significantly enrich our knowledge about pre-war Pavlodar. "Pavlodarskiyebyli" is especially valuable because earlier the 30s of the 20th century were considered as a kind of "white spot" in the Russian literature of the region. On charges of anti-Soviet activities, G. A. Beshkarev was sentenced to serve a five-year term in Siberian camps, and his work, which remained unpublished for a long time, only finds its readers in our time. The works of G.A. Beshkarev are included in the "Pavlodar literary"anthology on the study of Russian writers in Kazakhstan. In this regard, it is important to restore the portrait of the author's personality, and today the memories of his contemporaries, their written and oral evidencecan only help. This article is an attempt to systematize and analyze the data obtained as a result of the interview and can serve as a material for creating a biography of the writer. Conversations with the author's relatives, conducted in the fall of 2017 in Almaty by the author of the article, reveal the writer's personality traits, his attitude to various aspects of life: to the era, people, and creativity. In the memoirs of family members, Beshkarev appears as a person of rare directness and steadfastness, irreconcilable with the injustices of his time, as a person physically resistant, endowed with endurance. In the memory of friends, he is captured as a talented speaker, sometimes angry with the language, as clockwork, indefatigable, deeply artistic person of rare charm, who was able to impress colleagues, women, and students, as well as a teacher who is ready to selflessly and enthusiastically help students overcome difficulties.

The article is devoted to the mathematical modulation of a complex of experimental data obtained in the process of experimental studies of processed cheese products, processed by mathematical methods. The purpose of this study is to establish the type and amount of the melting salt that promotes the formation of the plastic structure of the processed cheese product. The analysis of scientific research in the field of food technologies showed that mathematical modeling is used in the following areas: clarification of the modes of technological processes, design of recipes and assessment of the quality of finished products, as well as forecasting the shelf life of new products when they are put into production. The most relevant in describing the processes of food production are models of multivariate variance-regression analysis using methods of mathematical planning of the experiment. The authors carried out mathematical modeling and established graphical dependencies characterizing the degree of influence of the regulated factors X1 and X2 on the controlled ones that determine the quality and safety of processed cheese products. It is important that the mathematical analysis of the graphical dependences of the rheological parameters on the adjustable factors indicates the reliability of the data obtained. It is concluded that an increase in the melting salt dose leads to an increase in the – limit shear stress, which reflects the nature and state of the consistency of the processed cheese product. The process of normalization of the controlled factors by the maximum value was carried out. Graphical dependencies were built and regression analysis was performed, the results of which allow an objective assessment of the degree of influence of the type and dose of the melting salt on the chemical and organoleptic characteristics of the test products. The authors have proven that the optimal efficiency of transforming the structure of the constituent components of the recipe into a plastic structure of a processed cheese product that is stable during storage is provided by a combination of adjustable factors X1 (Solva 85) and X2 (Solva 120) taken in a ratio of 1: 1, with a total amount of 1,2 mas.%. At the same time, the quality indicators of the experimental products are characterized by the following values of the controlled factors: У1 – 1280 Pa; У2 – 9 points, У3 – 9,301 (2,0-2,2109 colony forming units /g).

Main problem: The genus Morbillivirus of the family Paramyxoviridae includes agents of morbilli, plague of cattle, carnivores and small ruminants. Plague agent of carnivores causes a dangerous disease of fur animals and dogs, which in many cases ends in death. The disease is widespread everywhere, including Kazakhstan. In our country, the mixed form of the disease is most common, and the least common is the skin and nervous forms. The chronic course of plague is observed to a greater extent with the nervous form, subacute - with mixed and intestinal, acute - with cutaneous and pulmonary forms of the disease. Goal: Veterinarians have significant difficulties in diagnosing carnivorous plague. Despite the fact that serological methods for diagnosing this infection have been developed and applied for research purposes, the lack of commercial diagnostic preparations on sale significantly restrains their use by practical veterinary workers. Therefore, the diagnosis of plague of carnivores is mainly established on the basis of the symptom complex of the disease and the data of epizootic and pathological anatomical studies, the results of which are largely similar to those in some other diseases of carnivores. Scientific research in the field of means and methods of laboratory diagnostics of carnivore plague, applicable in practical veterinary medicine, is in great demand. Methods: Considering the fact that the carnivores plague and cattle plague are antigenically closely related, studies were carried out to determine the possibility of using means and methods for diagnosing cattle plague for serological diagnosis of carnivores plague. Results and their significance: It has been established that the use of means and methods for diagnosing cattle plague makes it possible to diagnose carnivore plague at all stages of the course of the disease, their use makes it possible to reliably establish a diagnosis of the disease in fur-bearing animals and dogs in a short time after the receipt of samples of material for research, even in cases of mixed viral and bacterial infections; and also to differentiate the plague of carnivores from diseases similar to it - parvovirus enteritis, infectious hepatitis and a number of others.

This article discusses the issues of ensuring the confidentiality of personal data in the context of the development of the information society. The purpose of the article is to study the problems of ensuring the confidentiality of personal data in the Republic of Kazakhstan in the conditions of digitalization of the economy and society. The methodological basis of this research is based on General scientific methods: philosophical, dialectical, synergetic, inductive, deductive, method of analysis and synthesis, formalization, analogy, materialistic and empirical methods that ensure the integrity and balance of research, as well as a formal legal method that allowed an adequate analysis of the content of the personal data protection system in foreign countries and Kazakhstan. The processes of globalization, information openness and digitalization have set a number of tasks aimed at solving the problems of ensuring information security while maintaining a balance of interests of the individual, society and the state. In this regard, the problems of ensuring the security of personal data turnover on the Internet, today, is relevant for science and law enforcement practice. The current legislation of the Republic of Kazakhstan on personal data does not pay enough attention to issues related to the processing of personal data in information systems. Improving the legislation of the Republic of Kazakhstan in the field of ensuring the security of personal data processing on the Internet is relevant in the framework of implementing the provisions of the Cybersecurity concept («Cyber shield of Kazakhstan»). However, national legislation does not provide specific guarantees against unauthorized collection of personal data. The current legislation of the Republic of Kazakhstan in this sphere of relations contains a number of legislative decisions, but there are legal errors that require timely adjustments, taking into account the borrowing of progressive experience of foreign countries. Special attention in this article is on the study of contemporary threats of violations of personal data, and provided ways to protect them. The authors conclude that, despite the fact that the law of the Republic of Kazakhstan «On personal data and their protection» sets requirements for the procedure for ensuring the confidentiality of personal data, at the same time they are general in nature and need further specification. In addition, there are a number of significant aspects that are directly related to ensuring the confidentiality of personal data, which have not yet received their proper legal regulation.

Annotation Main problem:The main idea of this study is the development of proposals for improving the legislation of the Republic of Kazakhstan, as well as the regulatory framework of the Eurasian Economic Union, taking into account the experience of the EuropeanUnion countries (as the largest integration association), towards the further development of the legal framework for cooperation in the social-labor sphere, as well as improving the integration and migration policy of the Eurasian Economic Union countries in general, and the Republic of Kazakhstan, in particular. In addition, this study intends to develop practical recommendations aimed at improving the activities of the law enforcement agencies of the Republic of Kazakhstan, as well as the EAEU countries, in the field of combating illegal migration and forced labor on the territory of this integration association. Moreover, this project suggests the legal promotion of the results obtained, both on the territory of the EAEU and beyond. Purpose: The aim of the study. To develop proposals for improving the legislation of the Republic of Kazakhstan and the EAEU countries in the field of legal regulation of labour migration and counteracting its negative consequences such as illegal migration, forced labour in the territory of this integration association. Methods: The methodological basis of the study is made up of traditional general scientific and special legal methods used in comparative jurisprudence: system-structural, historical-legal, social-legal and comparative-legal. Results and their significance:All of the above testifies to the relevance and necessity of research in the framework of this study, since its implementation, taking into account the expected results, will further improve the regulatory framework in the field of combating illegal migration, human trafficking and other illegal manifestations resulting from insufficient regulation of the labour migration sphere.

Main problem: The literature on regional entrepreneurship tends to neglect interregional human capital flows, and yet spatial mobility provides emerging entrepreneurs with knowledge and networks in different locations to exploit entrepreneurial opportunities. Purpose: The purpose of this study was to establish the relationship between mobility and entrepreneurship. Methods: Examined how multidisciplinary experience and non-local knowledge provide migrants with the desire for opportunity-based entrepreneurship. The connection between the regional environment and entrepreneurial motives based on opportunities for people with and without spatial mobility is shown. The analysis of data from a survey of labor force dynamics is presented, which compares the characteristics and driving forces of entrepreneurial motives of migrants and local residents. A survey has been conducted that indicates a higher prevalence of opportunity-based entrepreneurship among migrant entrepreneurs compared to their local counterparts. Official Kazakh statistics do not take into account the impact of internal migrants on the development of the economy and welfare of the region to which they moved. Results and their relevance: Based on the analysis and survey, it was found that the experience of spatial mobility significantly increases the likelihood of entering an opportunity-based business. The regional environment influences the entrepreneurial motives of migrants and non-migrants, but in different ways. Local entrepreneurs are more affected by the endogenous nature of the firm, while migrant entrepreneurs start businesses based on both local needs and external linkages with wider market areas. The regional environment influences the entrepreneurial motives of migrants and non-migrants, but the experience of spatial mobility significantly increases the likelihood of starting a business based on the opportunities of migrants.

The article discusses methods for creating smart things, using the example of the use of innovative technologies in the field of materials for clothing and footwear. The factors of form formation are substantiated by the example of the preferences of an individual customer who forms its image through accessories and shoes. The author considers the factors of shaping, based on the special functional features of shoes in connection with ergonomic factors. The designer is able to foresee the factor of transformability in modern footwear, changes in functional qualities, appearance, and design features of new footwear. As a result, on the basis of these transformations, to get a new emotional image and a new form. The shape of the shoe becomes a factor for transformations at the request of the customer. The article discusses the functional tasks of this shoe, plastic characteristics, technical and design tasks. As research methods, the article proposes variants of experimental models with possible stages of transformation, presents preliminary technical data, conducts a comparative analysis with innovative footwear samples of famous world designers, and makes assumptions about the development of this model in the future. An experimental method was used during the study. A shoe shape was developed, which took into account the preferences of the age group of 12-16 years old, relying on this category of consumers, we were able to go beyond the rational understanding of shoes as a functional form and gave it the meaning of a fantastic image, which allowed us to consider the form in the semantic and artistic context dictated by this age group of consumers. In addition, investing in this model the concept of "smart shoes", we considered not only the ability of modification and transformation by rearranging replaceable parts, the possibility of designing and reincarnating from one form to another, combining the constituent elements of the shoe into one whole, but also the development of the creative potential of the consumer, who at its own discretion can rebuild the structure and, in fact, as a designer itself, form a new model. The article makes assumptions about its further development in various fields of activity. For example, medicine, sports, art, etc. Considering the introduction of new materials, we relied on discoveries in the field of nanotechnology and considered among the possible features of this model the change in color on the basis, the reaction of materials to light, temperature, etc. The project is aimed at creating such shoes that will be developed for a wide range of consumers thanks to the wide range of possibilities contained in the design of the form and the features of modern materials.

When solving project tasks, it is necessary to take into account the maximum number of possible solutions that contribute to the efficiency of the object. When analyzing the activity of multifunctional objects, such solutions are all the more important, since they allow, taking into account the specific features of the object, to make the most rational design decision, especially if these solutions are associated with the ability to solve environmental and energy-efficient problems. The decisions made can take into account both the operation of the object itself and the infrastructure that provides the solution with the necessary engineering solutions. The most difficult thing in making project decisions is to systematize the studied situations and analyze informative sources. Systematization of methods of pre-project analysis, generalization of the experience of project work on the example of designing a roadside service object. Wepropose forms that facilitate the structuring of information sources, as well as logical tables that give an idea of the specifics of the choice of positions and directions that allows quickly come to an understanding of how to implement project tasks. Awareness of the methods that allow organizing the logic and sequence of design processes in design and architectural design allows the author to identify the most important problems from his point of view and fit them into the range of design tasks. The search for answers to these problems is formed by ways of structuring information and displaying it in pictorial structures, where the word takes on the meaning of a specific symbol, in a chain of connections that determine the understanding of the integral process of functioning of the future object, taking into account all aspects of its activity.

Main problem: The article examines promising directions in the production of fortified food products in Kazakhstan and Russia. The authors carried out an analytical review of the current state of production of fortified bakery products on the territory of the Russian Federation and the Republic of Kazakhstan. Anemia has been described as one of the most common consequences of micronutrient deficiencies. The problems associated with anemia lead to serious complications for the health and well-being of people. Lack of folic acid and vitamins in the diet is the cause of cardiovascular disease, maternal and child mortality. Purpose: The article considers the problem of significant deviations in nutrition of almost all groups of the population of Russia and Kazakhstan, regardless of lifestyle, habits or income level, which have an extremely negative effect on the health of the nation: the average life expectancy decreases, the productivity of the working-age population and resistance to diseases decrease. Methods: Based on the studied domestic and foreign technical literature, patent information, an analytical review of the current state and prospects of the production of fortified food products in the Russian Federation and the Republic of Kazakhstan was carried out. Results and their significance: The authors have shown that food fortification is the practice of purposefully increasing the content of vitamins and microelements in food to improve the nutritional quality of food and have a positive effect on human health. The authors considered the question of how the problem of micronutrient deficiency, including iron, is currently being effectively solved in many countries by enriching food products of mass consumption with vitamins and minerals.

The widespread introduction of information technologies makes significant changes in various spheres of human activity. The education sector is no exception. In this regard, in this article, the author considers the actual problem of developing electronic textbooks and is one of the most relevant and promising areas of informatization of the educational process. The analysis of the works of scientists A.A. Andreev, A.I. Bashmakov, T.I. Koval, V.M. Kukharenko, E.S. Polat, P.I. Serdyukov, S.S. Sysoeva, A.Yu. Uvarova was conducted. These works contain requirements for the development of electronic textbooks. Based on the results of the analysis, the author described the stages of developing electronic textbooks, the principles that they should correspond to, and also provided a list of modules that should make up an electronic textbook. From the existing variety of software packages, the author distinguishes CourseLab, Smart Builder, MOS Solo, Google Sites, iSpring Suite, TurboSite, Adobe Animate, HTML5. The development of electronic textbooks based on the technology presented by the author of the article and their subsequent application in the educational process will help to organize the educational and cognitive activities of students at a more effective level. Purpose is the description of the technology for the development of electronic textbooks, taking into account existing requirements. The article uses methods of analysis, synthesis and deduction. The analysis of requirements and principles of development of electronic textbooks is carried out on the basis of the descriptive-analytical method. The practical result of the proposed technology is the developed electronic textbook "Development of mobile applications". The results of the study, in addition to their theoretical significance, also have practical significance, which consists in the positive dynamics in resolving the contradiction between the continuously increasing flow of information and the limited opportunities of students to assimilate it. The conscious use of electronic textbooks in the educational process is one of the fundamental ways to improve the quality of education by changing the methods of teaching used in the direction of individualization and focus on the student.

Main problem: This study is devoted to the study of the problems of using special expertise in the investigation of crimes related to human trafficking. The use of specialized expertise is an integral element in the system of investigative actions carried out in cases of human trafficking. In this study, the authors consider the features of the production of forensic examinations in the investigation of crimes related to human trafficking in the Republic of Kazakhstan. In the study, the authors consider the most typical types of forensic examinations that are conducted in criminal cases of human trafficking. Based on the analysis of scientific literature, as well as the survey of practitioners engaged in the fight against human trafficking and the analysis of criminal cases of human trafficking, practical recommendations for criminal prosecution authorities on the most effective conduct of forensic examinations in criminal cases of this category are proposed. The purpose of this study: to study the tactical features of the production of forensic examinations in the investigation of human trafficking, as well as the features of the use of special expertise. Methods: The methodological basis of this study is the dialectical method of cognition of social and legal phenomena, as well as system-structural, comparative-legal, logical-theoretical and private scientific methods of study. To achieve the objectivity of the research results, these methods were applied comprehensively. Results and their significance: The use of forensic expertise in the investigation of human trafficking is essential for the detection and investigation of these crimes. The study notes that the following types of forensic examinations are among the most common in the investigation of this category of criminal cases: medical examination, biological examination, handwriting examination, phonoscopic examination and odorological examination. The subject of the investigation must carefully understand the tactical features of the production of certain forensic examinations. The practical recommendations proposed by the authors of the study on the appointment and production of forensic examinations considered in the study are important for the successful investigation of the facts of human trafficking, but at the same time they have a recommendatory value and can be modified taking into account the specifics of a particular criminal case.

Today, there is a full development of the food industry. It is characterized by the widest mechanization and automation of production and transport processes, the use of artificial cold and vacuum technology, the latest physical methods, chemical and biological preparations to accelerate technological processes. There are a huge variety of new products. New ways of long-term preservation of products in hermetic airtight packaging are promising. Now it is possible to deliver products from almost any industry to anywhere in the world. But the main problem for the modern consumer is that today's food industry is moving by leaps and bounds in the application and addition of chemical food additives: preservatives, flavors, dyes, stabilizers, antioxidants and substitutes for raw materials. To correctly answer the question of how to treat the use of food with food additives, it is necessary to understand and weigh the main disadvantages and advantages of using them. Advantages are that the product is better preserved, has an attractive appearance. Disadvantages are that the human body wears out, processing various chemicals, it is harmful to health. And with certain doses of use it becomes dangerous. Everyone has their own attitude to their health and their own priorities in life. Many people have come to terms with the daily use of products with additives, but others consciously refuse almost everything in the store. But the fact that no one wants to be poisoned from an overdose of various chemicals or starve to death. Therefore, the main advice is to carefully study the composition indicated on the label of food products and know the measure of their consumption. It is also impossible to believe blindly that the label was written with the truth. Manufacturers often use additives literally visually, which can lead to the production of a product with a dangerously higher concentration. It also happens that the manufacturer intentionally exceeds the norm in order to hide the shortcomings of the product (stale, poor quality of raw materials) and increase the yield of the finished product. The food additives added to many foods (usually designated by the code E) are predominantly harmful to the body. With moderate consumption, the use of products with E-supplements is not too harmful to the body (for example, several times a month). The situation is dangerous when a person consumes products with a large number of food additives daily or even several times a day when using various products. Nowadays, there are several hundred food additives with the code E (from E100 to E1521).

The article examines modern technologies that contribute to the implementation of creative design ideas, based on the analysis of modern lighting technology and energy saving factors. It is hypothesized that the goal of modern design in this article is defined as the creation of new space and values, through the renewal of the human environment. The basis for confirming this hypothesis should be the justification for the use of lighting technology and electronicsin solving conceptual and artistic design problems. The scientific research is based on the methodology for making design decisions and ways to open new ways for the implementation of creative imagination and new conceptual solutions of the designer, on the example of designing the interior of a cafe. The author considers and substantiates such terms as intelligent space, interior as a process, integrated lighting systems, informatization of interior space, new methods of decoration, etc. Examples of analysis of design situations from are given the point of view of functional tasks, classification of requirements when making design decisions is substantiated. Lighting technologies in the interior are viewed as a tool that solves a whole range of tasks that combine aesthetic and technological principles of interior shaping. Modern technology is seen as a designer's tool that should be used to understand the role of design as a conduit of scientific advances and innovative technologies to the consumer environment.

The preservation and enhancement of national values – this is the main goal of the work on the implementation of the program"Rukhanizhangyru". Program "Rukhanizhangyru" is a new stage in thehistorical development of modern Kazakhstan. Modernization of the public consciousness of each individual involves the revision of young people's attitude to themselves in order to achieve success in professional activities and consolidate their competitiveness. At the same time, it is important to preserve all the positive experience that has accumulated over the centuries, the characteristics of the people and the country, and education plays a system-forming role in this process. Today, in Kazakhstan and Russia, there is an acute issue of promoting values in the student environment, developing a sense of belonging to the present and past of the Motherland, responsibility for its future, but the potential of the educational space in the implementation of this process is not fully revealed. In the conditions of the changed educational space of these States, the process of forming a new generation of socially active, responsible for the development and preservation of spiritual values of young citizens who have all the values put forward by the States is relevant. The Purpose of this article is to study, analyze and generalize domestic and foreign experiences in the issues of introducing students to the system of national values, revealing the potential of the educational environment in promoting values in the youth environment and strengthening its competitiveness. Methods: methods such as analysis, generalization,and comparison are used, they allowed to reveal the depth and relevance of the problem within the educational space. Results and their significance: domestic and foreign experience in introducing students to the system of national values is Studied and generalized. Educational resources are considered as a guarantee of formation of values of youth, self-determination of each citizen in the conditions of modernization of consciousness.

Main problem: In the 18th century, when industrial production began, the use of steam and mechanized production caused major changes in the economy. As a result, production costs decreased along with an increase in the quantity and quality of products. During this period, production underwent a revolutionary transition from manual labor to mechanization. The potential impact of Industry 4.0 on labor markets remains an under-explored scientific field. It is estimated that Industry 4.0 will lead to unemployment by changing the employment structure and will bring new structural problems in terms of unemployment and labor relations. Purpose: The purpose of the study was to establish the impact of Industry 4.0 on the labor market and identify the consequences of the impact. Methods: studied, the evolution of production development, when mass production with electricity led to the Age of Industry 2.0, and then the emergence of the digital revolution, the use of electronics and information technology in production processes, marked the beginning of the Age of Industry 3.0. It is expected, according to international experts, scientists, that automation and robotic production will have a serious impact on the unskilled workforce and cause a critical reduction in the labor force of vulnerable sectors of society, that is, women, migrants, youth and the elderly. Results and their significance: This study assessed the possible impact of the fourth industrial revolution on labor markets. Through a literature review and analysis of emerging trends in Industry 4.0, the risks, opportunities and challenges of the process are explored in a comparative perspective. It has been established that countries must correctly perceive the transformation of labor markets and take appropriate measures. Otherwise, the applied labor-based low-cost industrialization model will lose its comparative advantage

The Kazakhstani manufacturer has repeatedly faced situations when pseudo-enterprises, disguising themselves as domestic producers of goods, works and services, received preferences and used government support measures, won government and other purchases, while not having enough equipment for production. The article is devoted to current problems and prospects for the application of the Industrial Certificate in the Republic of Kazakhstan. The dynamics of the development of the sphere of public procurement of the Republic of Kazakhstan is considered, depending on the specific requirements for certain areas of production of goods, works and services. The material in this article is important from the point of view of ensuring fair competition between competing enterprises in the same industry. The complex of transformations in the system of standardization, certification and quality management has been carried out since the first years of independence of the Republic of Kazakhstan. These transformations have been observed over the years, vivid examples of which are: the application of the European model of technical regulation to the modern realities of the economic situation in the Republic of Kazakhstan, accession to the Customs Union, the adoption of unified technical regulations of the Customs Union, the introduction of new regulations and legal acts defining the share of local content in products and services, as well as the potential of domestic industries. The results of these transformations have proved that the system of technical regulation of the Republic of Kazakhstan is an effective tool for the development of the economy. The development of new Kazakhstani normative legal acts and normative documents introduced to support the domestic producer of goods and services will contribute to the transformation of the old system and the creation of a new one that is fundamentally different from the previous one. The article discusses problematic issues in the field of industrial certification, namely: a lack of qualified personnel; unregulated pricing system for work carried out in this area; the complexity of the industrial certification procedure; a lack of automation of processes of the industrial certification mechanism. Analyzing the practice of industrial certification, this article offers recommendations for solving the above problematic issues. New edition of amendments and additions to the «Rules for the formation and maintenance of the register of domestic manufacturers of goods, works and services, as well as the issuance of an Industrial certificate» approved by the decision of the Presidium of the National Chamber of Entrepreneurs of the Republic of Kazakhstan «Atameken» dated 28.12.2018. No. 28 is designed to reconstruct the process of obtaining the Industrial Certificate. The process should become more transparent, understandable and highly efficient. Also, with the introduction of changes, the problems that hindered the receipt of the Industrial certificate by individual enterprises should be resolved.

This scientific and practical article is devoted to the analysis of the results of an experiment aimed at psychological and pedagogical support of the process of building a project for the development of the inner world of a player of a children's and youth football team of the professional football club "Lviv" from the Ukrainian city of Lviv. A special feature of the psychological and pedagogical support for designing the development of the student's psyche is the use of the paradigm of the language of the theory of activity in the version of the Moscow methodological and pedagogical circle (MMPC), using the language of schematic images and the pyramid of subjectivity, explaining the path of formation of human mental mechanisms in the unity of cognitive, emotive and conative processes, starting from the vital level of their development to the level of spirituality. Another feature of the article is that the presentation of methods and techniques does not occur in a separate part of it, but in the process of describing the steps of designing a development plan that is formed for absolutely all professional athletes who have the acmeological potential of professionalization in football. It is presented in the form of 11 steps to create an individual trajectory of the player's development. In each of these steps, it is important that the coaches and the player participate with their parents, representatives of the club, which has its own component in terms of the volume and quality of the efforts required on their part. The article reveals the first of the 4 steps of creating a reasonable player development plan. For example, we consider working with one of the players. The content of this particular illustration is a very illustrative and demonstrative example. It is assumed that a series of articles in this publication will reveal the topic of student development management, which will include both scientific and theoretical and review types of works. The next article will be a continuation of this one in terms of demonstrating the success of implementing this particular development plan by the example of several players from a team consisting of 22 players who have been trained in a similar way, i.e. using methodological criteria for the organization of psychological and pedagogical support for the development of thinking, sensory-motivational and volitional characteristics of players by football club coaches.

The main problem: This article is devoted to the key problems of the fuel and energy complex of the Republic of Kazakhstan: 1) lack of production capacity to meet the growing demand for energy and fuel from the economy and the population. Increased demand for electricity and heat, which will require the commissioning of new generating capacities.There is already a shortage in the fuel markets. Modernization and bringing the existing oil refineries (hereinafter referred to as refineries) to full capacity will not allow providing the domestic market until 2030; 2) the export orientation of raw materials, the dependence of the economy on the export of energy resources. In order to attract technology and investment in the oil and gas and nuclear industries, agreements on the extraction of energy resources were concluded with international export companies. In the medium term, Kazakhstan may face a shortage of oil for domestic refineries, if measures are not taken to stimulate its refining within the country. The uranium mined is fully exported; 3) high energy intensity of the economy, low level of energy efficiency. There is a high potential for increasing the efficiency of energy use both in the electric power industry and fuel production, and at the level of final consumption – in industry and housing and communal services; 4) decrease in the replenishment and quality of the resource base in the oil and gas, coal and nuclear industries; 5) low environmental friendliness of technologies used in the fuel and energy complex. Purpose: The purpose of the article is to reveal the problem in the field of ensuring the fulfillment of international obligations between different countries and their own energy sufficiency by gradually changing the structure of energy production. Methods: Studying the experience of increasing the efficiency of the use of energy resources and energy saving as a priority of the state policy of the country. Analysis of production capacity with a constantly forecasted shortage of primary energy resources and insufficient growth of capacity for the production of electricity and heat. Consideration of the possibility of compensating for the shortage by saving energy resources, increasing tariffs for energy carriers, as a stimulating factor for their effective use. Results and their significance: The results of this article will reflect the problems of energy, as the most important driving force of global economic progress. The well-being of the people depends on the state of the country's energy sector, therefore there is an urgent need to solve the emerging problems. The global energy problem is, first of all, the issue of stable and efficient supply of fuel and energy to mankind. Today, the energy sector of Kazakhstan is focused on fuel resources, since the country is provided with hydrocarbons and other energy resources. About 72 % of electricity in Kazakhstan is generated from coal, 12,3 % from hydro resources, 10,6 % from gas and 4,9 % from oil. Thus, the four main types of power plants generate 99,8 % of electricity, while alternative sources account for less than 0,2 %.

Currently, close attention is paid to industrial safety at hazardous production facilities. Compliance with industrial safety requirements is directly related to the risks of accidents that can lead to man-made disasters, negatively affect the health and life of the population. As in any other industry, there are problems in ensuring industrial safety. There are several reasons for this: the backlog of standards from scientific and technological progress, the exclusive competence of state authorized bodies, and the lack of a risk-based approach. After the collapse of the USSR, the requirements of industrial safety in the Republic of Kazakhstan have practically not changed: laws and statutory instruments (hereinafter-the LSI) are approved and put into effect, after which they are constantly changed and supplemented; the presence of national and international standards, which, in fact, are revised on the basis of the USSR standards, taking into account the influence of the realities of the time. It can be concluded that the current standards are not focused on the future, scientific and technological progress, innovation, so they are constantly undergoing changes, thereby adapting to the necessary requirements that dictate modernity. State regulation does not contribute to the effective development of industrial safety. This is due to the fact that the state performs exclusively supervisory functions (thus it is exclusively educational in nature), and there is no dialogue between authorized state bodies, expert organizations, scientific organizations, and testing laboratories. If we consider the experience of the Russian Federation in the field of industrial safety, then it makes no sense to accept even some experience, since: similar to the Kazakhstan’ LSI and regulatory and technical documentation (and their constant dynamics), the development of cooperation with the Russian Federation within the framework of the Eurasian Economic Union. Accordingly, it is advisable to consider the experience in the field of industrial safety in Europe and the United States of America because of the effectiveness of regulation and supervision than in the Republic of Kazakhstan and the Russian Federation. This article provides information about international experience in the field of industrial safety in the United States and the European Union. The tasks of state regulation in the field of industrial safety in the Republic of Kazakhstan, the Russian Federation, the United States, and the European Union are described in detail. The analysis of normative-legal acts and normative-technical documentation is carried out. Based on the analysis of international experience, solutions to problems in the field of industrial safety for the Republic of Kazakhstan are essentially presented. The purpose of this article is to reveal the problem in the field of industrial safety in the Republic of Kazakhstan and international experience that the Republic of Kazakhstan can borrow in order to effectively ensure industrial safety. Study of international experience (USA, EU countries, Russia) in the field of industrial safety in terms of: analysis of standards; regulation (control and supervisory functions) to ensure safety. The results of this article will reflect the problems that hinder the effective provision of industrial safety in the Republic of Kazakhstan and essentially suggest ways to solve them.

In the conditions of market uncertainty, the coronavirus pandemic, the absence of an officially articulated national idea, national interests and ideology in Kazakhstan, the problem of the lack of logically justified and coordinated coordinates of systemic thinking, an unambiguous paradigm of humanitarian thinking (analytical, pedagogical, managerial, economic, etc.) is becoming more and more clearly realized as the most important conditions for personal, civil and professional self-determination. The purpose is to substantiate the general logical coordinates and methods of reformatting the ambiguous humanitarian paradigm used in the activity. The study used various methods: the ontological principle of genetically meaningful logic, the method of transformation of concrete images of objects based on their abstract essence, the method of ascent from the abstract to the concrete, the speculative language of schematic images of thought and the language of methodological theory of activity. Logically justified universal abstract-concrete coordinates of universal motion are given. In relation to life and the world of activity, they can be concretized by coordinates: "standard of living – efficiency of activity", or "efficiency of activity – time", or "results – costs", or "quality – quantity", etc. The use of motion vectors in the logic of descent from the concrete to the abstract (NCA), ascent from the abstract to the concrete (AAC), as well as in their combination – logic CAC gives certainty to thinking. As an example, the scheme of the qualitative difference between educational (pre-professional) activities from professional ones using these methods and paired dialectical categories is given. The scheme and description of the functional model of the system object, considered as a rubicon of the transformation of educational activity into professional activity, are given. To reformat the indefinite, ambiguous paradigms of the humanities used in the activity into functional-logical, visible, constructive and unambiguous, it is recommended to use abstract-concrete coordinates, the methods given, the language of schematic images and the paradigm of the methodological theory of activity. As an example, the concept of a typical unit of activity development is given. A visible unambiguous paradigm is a necessary, but not sufficient prerequisite for adequate personal, civil and professional self-determination of a person in situations of high uncertainty. A sufficient prerequisite is the acquisition by subjects of appropriate reflexive-thinking abilities for self-determination, self-organization, self-regulation, etc.

Singularly perturbed partial differential equations with small parameters with higher derivatives deserve special attention, which often arise in a variety of applied problems and are used in describing mathematical models of diffusion processes, absorption taking into account small diffusion, filtration of liquids in porous media, chemical kinetics, chromatography, heat and mass transfer, hydrodynamics and many other fields. It is necessary to consider the creation of an asymptotic classification of solutions of singularly perturbed equations using a well-known approach to solving the boundary value problem. In this case, the singular problem is understood as the problem of constructing the asymptotics of the solution of the Cauchy problem for a system of ordinary differential equations with a small parameter with a large derivative. The asymptotics of the solution in all cases is based on the last time interval or the construction of a boundary value problem for a system with a weak clot in an asymptotically large time interval. Purpose - to construct and substantiate the asymptotics of solving a singular initial problem for a system of two nonlinear ordinary differential equations with a small parameter; To date, a number of methods have been developed for constructing asymptotic expansions of solutions to various problems. This is the method of boundary functions developed in the works of A.B. Vasilyeva, M.I. Vishik, L.A. Lusternik, V.F. Butuzov; the regularization method of S. A. Lomov, methods of averaging, VKB, splicing of asymptotic decompositions of A.M. Ilyin and others. All the above methods allow us to obtain asymptotic expansions of solutions for wide classes of equations. At the same time, such singularly perturbed problems often arise, to which ready-made methods are not applicable or do not allow to obtain an effective result. Therefore, the development of methods for solving equations remains a very urgent problem. As a result of the study, an algorithm for constructing an asymptotic classification of the initial solution of the problem with a singular perturbation is given, and approaches to estimating the residual term are also shown.

The development of extraction techniques of medical plants aims to maximize the bioactive compounds production. Тechnologies in this area of industry have not high enough еfficiency factor. In some cases, it reaches only 40-50 %. Therefore, development of new methods to effectively extract different compounds from plant material and their input into large-scale industry is of great importance. The goal is to determine an effective and suitable technology for extracting bioactive compounds from medical plant. This is a narrative review paper which focuses on different extraction methods of medical plant. To find relevant articles for this narrative review, 73 articles were reviewed. Of these, 14 irrelevant documents were discarded. This review analyses various extraction processes to guide the selection of suitable methods for various types of medical plants and applications. This is done by outlining traditional and modern methods of extraction techniques, exploring the importance of solvents for extraction, and comparing novel and alternative methods of extraction. In conclusion, based on the current knowledge, solvent extraction is the most common method for medical plants extraction. Enzymatic hydrolysis and supercritical extraction are advanced techniques with high yield of compounds. However, more research is needed for some modern extraction methods.

Main problem: One of the most complicated types of marketing is marketing of medical services or organizations. This can be attributed to many reasons. First of all, person’s life and health is the most important value. One more reason is that budget funds are limited, this forces us to look for extra-budgetary financing sources. At the same time, it follows that the population of the Republic of Kazakhstan, receiving free assistance for a long time, refuse paid medicine, the solvency of a large percentage of the population. Thus, marketing research of the services market is designed to identify the real market share of trade and paid medicine, to fill the need of the qualified medical care, to identify the particularity of demand in various segments and the demographic and psychographic characteristics of the population groups. Purpose: to identify current trends and develop marketing strategies in the regional market of medical services, allowing to identify and strengthen the economic foundations of the functioning of non-profit organizations in the national market. Methods: The research was conducted using traditional methods of marketing research: qualitative: in-depth interview, focus groups; quantitative: survey, as well as methods of economic analysis: comparative, graphical and scenario planning. Results and their significance: the essence of marketing in healthcare is considered, the features of marketing research are taken into account; the medical services market of Pavlodar region is analyzed and evaluated and ways of its improvement are proposed. The results of the study may be useful for the development of measures to further improve the activities of medical organizations in the Republic of Kazakhstan.

Globalization is an integral part of our life. Therefore, today the relevance of learning foreign languages, in particular English, is beyond doubt, as interest in foreign culture, education, travel, life and work abroad increases. It is known that English is the most widespread international means of communication (including information technology and web space), for most of the population it is the native or state language. This is due to historical, political and geographical prerequisites, as well as socio-economic and cultural development. Proficiency in English opens up great prospects for those who know, but not every person chooses a linguistic direction of study when entering a higher educational institution. Mastering English is a laborious process. In universities of non-linguistic areas, one of the main problems for students is the so-called language anxiety and psychological barriers, especially for those students for whom English is not a core subject or direction of future activity. Overcoming language anxiety and psychological barriers continues to be an urgent issue in pedagogical psychology and the educational process of higher educational institutions. Therefore, the task of the teacher is to create such conditions in his classes so that the student has a desire to learn, develop himself and improve himself. It is necessary to form motivation for conversational skills through psychologically thought-out techniques and methods. The task of the teacher is to direct the student from a conniving and indifferent attitude to study to a conscious and positive attitude. To implement the above, the teacher needs to form the old motives and stimulate new, positive ones. The encouragement of positive manifestations of emotions should be supported, stimulated and helped to realize these emotions by the teacher in the educational process. For example, simple tasks, but at the same time fascinating, the manifestation of sincere emotions in the classroom by the teacher himself and his personal examples inspire students to pronounce their state of mind and experiences. Encouraging and highlighting the activity of students also helps to increase the motivation of learning, especially if they have creative ideas that differ from other fellow students. The purpose of the article is to describe the methods of teaching conversational skills, their advantages and disadvantages and to consider in detail the overcoming of language barriers when learning a foreign language. The methodological basis of the research was the works of such authors as: H.F. Makaev, O.S. Zorkina, V.P. Ipatova, L.V. Barinkova, E.V. Zarubina, E.I. Kaputskaya, E.I. Passov, E.G. Asimov, A.N. Shchukin and others. Critical analysis of scientific and methodological literature on the problem, study and generalization of positive experience of teachers; collection of empirical information, experiment, quantitative and qualitative data analysis. The results of the study can be used in the process of developing practical recommendations for psychological work with students in order to increase their motivation to learn a foreign language. In addition, these results can be used by teachers to correct and improve the effectiveness of the educational process.

The article presents a method of teaching object-oriented programming to students of the educational program «Computer Engineering and software» using the project method. The problem of the insufficient level of organization of the educational process in colleges, aimed at studying any kind of object programming, is investigated. In this regard, the important aspects that must be taken into account when constructing a methodology for teaching object-oriented programming, aimed at enhancing the cognitive independence of students, are described in detail. It is shown that the solution to this problem largely depends on the degree of achievement of the learning goals of students specified in GOSTiPO, as well as on the methodological guide to object-oriented programming, developed in accordance with the requirements of modern education. An analysis was made of the State Compulsory Standard for Technical and Vocational Education of the Republic of Kazakhstan, the Model Curriculum and the Working Curriculum in the discipline "Fundamentals of Object-Oriented Programming" for students of the educational program "Computer Engineering and Software" and the teaching methodology developed on their basis. The purpose is to substantiate the methodology for teaching students object-oriented programming, which activates cognitive activity through the use of the project method and its practical application in the educational process. Methods: The methods of analysis, synthesis and deduction were used in the article. Results and their significance: The practical result of the analysis was the method of teaching college students object-oriented programming, using the project method, which is necessary for a more intensive development of cognitive independence. The practical significance of the results is to increase the efficiency of studying the discipline by taking into account the individual characteristics of students.

The main problem: Modern research in the development of fermented milk products is focused on increasing the bioavailability of milk components, as well as the use of bacterial components of sourdough, which increase health properties. The use of the fermentation process of skimmed milk with a combined starter consisting of traditional for cottage cheese and starter cultures of probiotic cultures immobilized in a gel of biopolymers is very important. Purpose: The purpose of this study is to determine the optimal amount of starter, consisting of an association of probiotic cultures immobilized in a gel of biopolymers (membranes) to be added to fermented skimmed milk in order to enrich it with functional ingredients. Methods: A one-factor experiment was used. The culture association Propionibacterium freudenreichii subsp. was used as a regulatory factor. Shermanii, Bifidobacterium lactis and Streptococcus thermophilus, immobilized in a biopolymer gel, added to skimmed milk in the form of membranes (determined as a percentage of the mass of fermented milk). Controlled factors are the main indicators characterizing the efficiency of the skim milk fermentation process; these are active acidity, the logarithm of the number of viable cells of bifidobacteria, the logarithm of the number of viable cells of propionic acid bacteria, and organoleptic evaluation. Results and their significance: Based on the results of a mathematical analysis of the totality of values of controlled factors depending on the amount of starter cultures of probiotic cultures, mathematical models were built to determine the degree of influence of the starter on the quality indicators of the product, using the Table Curve 3D-v4 mathematical computer program.

Main problem: It is very important for each company to obtain an industrial certificate, which makes it possible to get into the Register of Domestic Manufacturers, as they expect to receive large orders. With the receipt of an industrial certificate, their prospects for participation in various tenders and purchases will significantly increase, where they can show their abilities, compete with domestic producers, and also have an advantage over importers. Since July 1, 2019, the industrial certificate has become mandatory for participation in public procurement. Corresponding changes to the rules for public procurement were made by the Ministry of Finance of the Republic of Kazakhstan. Taking into account the experience of the «Rules for determining the country of origin of goods, issuing a certificate of origin of goods and canceling its validity», approved by Order of the Acting Minister for Investment and Development of the Republic of Kazakhstan dated February 24, 2015. No. 155», it becomes clear that the document does not take into account a number of «narrow» specifics of individual industries. Purpose: development of amendments and additions to the «Rules for the formation and maintenance of the register of domestic producers of goods, works and services, as well as the issuance of an Industrial Certificate» for the subsequent possibility of obtaining an Industrial Certificate by a chemical industry enterprise for the production of mineral fertilizers. Methods: study and analysis of literary sources, statistics and modeling of the procedure for issuing an Industrial Certificate. Results and their significance: the problems of application were studied, ways to solve these problems were found, and amendments and additions to the “Rules for the formation and maintenance of the register of domestic producers of goods, works and services, as well as the issuance of an industrial certificate” were developed. At the moment, the Rules need to be carefully finalized. It is necessary to consider this issue together with authorized state bodies, associations and business representatives, since obtaining an Industrial Certificate will directly affect participation in public procurement, and, accordingly, the economy of the Republic of Kazakhstan.

In modern conditions, the problem of the incidence of cows with high productivity in the postpartum period is relevant. It is these animals that are more susceptible to various diseases, primarily due to violations of the technology of keeping and feeding, weak body resistance, heavy loads during fruiting and milk production. It is known that as a result of various metabolic disorders, calving of cows in farms proceeds with various deviations. The lack of calcium in the blood due to hormonal disorders leads to hypocalcemia and paresis after calving, which is often the cause of death of animals. Therefore, the improvement of prevention schemes and treatment of puerperal paresis in cows is very relevant. Purpose of the article – Improvement of preventive and therapeutic measures for postpartum paresis in cows on the basis of the Tassu farm in Akmola district. The work was carried out under production conditions on a livestock farm in the Akmola region, in the farm "Tassu" in the spring and summer. The object of the study were black-motley cows with a pregnancy period of 250-260 days. 22 animals were selected in the experimental group, 12 animals in the control group. The average weight of animals is 567 ± 34.5 kg, age 5-6 years. The cows of the experimental group received injections of the drug Karsulen, which included: 2 % Cardus marianus D3, 1 % Sulfur D6 and 1 % Arsenycum album D6. Karsulen was administered to cows intramuscularly or subcutaneously at the rate of 1 ml per 100 kg of animal weight, the dose volume should not be less than 5 ml per animal. In the postpartum period, in the complex therapy of postpartum paresis in cows, Karsulen is used intramuscularly or subcutaneously 1-2 times a day. The use of the drug Karsulen with the composition: 1 % Cardus marianus D3, 1 % Sulfur D6 and 1 % Arsenycum album D6 has a regulatory effect on protein, carbohydrate, fat metabolism, restores impaired function of the gastrointestinal tract, liver and kidneys.

Main problem: At present, service, decorative and hunting dog breeding is intensively developing in Russia and in the Tula region. So, in 2020, 119 high-breed puppies were registered in the Book of Pedigree Breeding, and in 2021 already 164 puppies, mostly decorative and service breeds. Thus, the number of pedigreed dogs susceptible to various infectious diseases is increasing annually. Canine distemper is one of the most widespread viral diseases of dogs all over the world, including in Russia. Analyzing the "Patient Admission Logs" of veterinary clinics in the city of Tula, it was found that 44 % of dogs that fell ill with diseases of infectious etiology were diagnosed with canine distemper. Purpose: The aim of our research was to study the epizootological features of the course of canine distemper among dogs in the Tula region of Russia. To achieve the intended goal, it was necessary to solve the following problem: to analyze the breed and age factors for the incidence of canine distemper. Methods: Analysis of data from private veterinary clinics reporting on the incidence of small domestic animals was used. Results and their significance: As a result of studying the epizootic situation of canine distemper among dogs, the following data were obtained: The disease is observed throughout the year and has the character of undamped fluctuations subject to sharp seasonal changes. The maximum number of diseased dogs in all years of observation is recorded in March - 6.2 cases per 1000 individuals. It has been established that among the infectious diseases of dogs, distemper occupies the first place, and there is an annual increase in the number of dogs with distemper.

Injuries among domestic animals account for 50-70 % of all non-communicable diseases. Fractures of bones, mainly limbs, occur in 44.5 % of cases. The main goal of fracture treatment is to restore normal function and movement of the limb, and the ways in which this is done are varied. Preference is given to methods that do not constrain the movement of the limb, allowing the animal to use it during the treatment period. Purpose: This article discusses the method of bone osteosynthesis, which has proven itself in the treatment of bone fractures, and is relevant today in veterinary medicine. The main study was conducted on the basis of the veterinary clinic "Shans" in Pavlodar. For osteosynthesis, plates for osteosynthesis and screws made of titanium alloy were used. This is due to the fact that when in contact with each other, the metal that fixes bone fragments can oxidize. Animals come to the clinic as a result of injuries that lead to fractures. The most common causes include falls from a height, motor vehicles, careless or rough handling of animals, and contact with other animals. When a fracture is established by obvious signs or if a fracture is suspected, such patients are preliminarily sent for x-rays. Upon receipt of an X-ray image and with the consent of the owner of the animal, osteosynthesis is performed. When accessing bone fragments, the incision was made along the muscle fibers. Osteosynthesis was performed according to the method described by V.M. Shapovalov (2009). The general condition of the animals after osteosynthesis was restored after 3-5 days. All animals, after bone osteosynthesis, completely relied on the limb. Contractures of adjacent joints and muscle atrophy were not determined. Plain osteosynthesis of the femur, in the presence of the necessary instrument and consumables, is not very difficult to perform. Performing bone osteosynthesis in the early stages makes it possible to include the limb in the locomotory act, as a result of which the animal actively uses the limb during the rehabilitation period.

Das Hauptproblem: die allgegenwärtige Einführung von Informationstechnologien führt zu erheblichen Veränderungen in verschiedenen Bereichen der menschlichen Tätigkeit. Auch der Bildungsbereich ist keine Ausnahme. In diesem Zusammenhang hat der Autor in diesem Artikel ein aktuelles Problem behandelt, das in der Entwicklung elektronischer Lehrmittel liegt und eine der aktuellen und vielversprechenden Richtungen der Informatisierung des Bildungsprozesses ist. Es wurden die Arbeiten von Wissenschaftlern S.S. Sysoeva, V.M. Kuharenko, A.I. Bashmakova, T.I. Koval, E.S. Polat, A.Y. Uvarova, P.I. Serdjukow, A.A. Andreev analysiert. Diese Arbeiten enthalten Anforderungen an die Entwicklung elektronischer Lehrmittel. Nach der Analyse beschrieb der Autor die Entwicklungsschritte von elektronischen Lernprogrammen, die Prinzipien, denen sie entsprechen sollten, und führte eine Liste der Module an, aus denen das elektronische Lernprogramm bestehen sollte. Aus der vorhandenen Vielfalt an Softwarekomplexen hebt der Autor CourseLab, Smart Builder, MOS Solo, Google Sites, iSpring Suite, TurboSite, Adobe Animate, HTML5 hervor. Die Entwicklung von elektronischen Lehrmitteln für die vom Autor des Artikels vorgestellte Technologie und deren anschließende Anwendung im Bildungsprozess wird dazu beitragen, die Lehr- und kognitive Aktivität der Lernenden auf einem effizienteren Niveau zu organisieren. Zweck: beschreibung der Technologie zur Entwicklung von elektronischen Lernprogrammen unter Berücksichtigung bestehender Anforderungen. Methoden: der Artikel verwendete Methoden zur Analyse, Synthese und Abzug. Die Analyse der Anforderungen und Prinzipien für die Entwicklung elektronischer Lernprogramme basiert auf einer deskriptiven und analytischen Methode. Ergebnisse und ihre Bedeutung: das praktische Ergebnis der vorgeschlagenen Technologie war das entwickelte elektronische Lernprogramm «Entwicklung mobiler Anwendungen». Die Ergebnisse der Studie haben neben der theoretischen Bedeutung auch eine praktische Bedeutung, die in einer positiven Dynamik liegt, um den Widerspruch zwischen dem ständig wachsenden Informationsfluss und der begrenzten Fähigkeit der Lernenden, ihn zu erlernen, zu lösen. Die bewusste Verwendung elektronischer Lehrmittel im Lernprozess ist eine grundlegende Möglichkeit, die Bildungsqualität zu verbessern, indem die verwendeten Unterrichtsmethoden und -techniken in Richtung Individualisierung und Fokussierung auf den Lernenden geändert werden.

Main problem: for the 2019-2021 years of the implementation of the state program, the indicator for the number of incoming visitors in the tourism sector of the region was achieved in 2019. In 2020-2021, the indicator was not reached due to the global pandemic associated with the spread of coronavirus infection by Covid-19, and therefore the attractiveness and profitability of tourism in Kazakhstan decreased. Tourism and the increasing demand for tourism services every year are becoming a source of large incomes and profits in many countries. According to the World Travel and Tourism Council (WTTC), travel and tourism is currently the largest industry in the world, taking into account the contribution to global GDP and employment. [1] The conclusions made in this paper and practical recommendations can contribute to the development of measures to improve the process of effective management and reform of the tourism industry. The purpose: to study the theoretical and practical aspects of the development of the tourism industry in the Pavlodar region. Methods: in the course of the research, the following methods were used: theoretical analysis of literature, methods of ranking, analysis, grouping and systematization of data, statistical methods. Results and their value: currently, the tourism industry of both Kazakhstan and its regions is gradually beginning to develop. The article presents the result of assessing the attractiveness of the tourism market and shows ways to expand the industry, as well as reveals the specifics of management in the tourism sector. The formulated conclusions and practical recommendations can contribute to the development of measures to improve the process of effective management and reform of the tourism industry of Pavlodar region, as well as the development of a mechanism for using tourism potential in the socio-economic development of Kazakhstan. This study is relevant, since the main task for today is the need to study the problems and challenges in the field of tourism development, which will contribute to the development of other related industries in the Republic of Kazakhstan. The development and solution of the problems of the tourism industry itself will undoubtedly lead to an increase in the opportunities of this market and the demand for services and, as a result, will affect the development of economic indicators of both regions and the whole of Kazakhstan.

As part of solving the priority tasks set in the Address of the President of the Republic of Kazakhstan Kassym-Jomart Tokayev, a significant role is given to the development of the food industry, including dairy products. Big tasks are to be solved by branch science in the field of processing raw materials of plant and animal origin using the achievements of bio- and nanotechnologies to improve the quality, biological, nutritional value and food safety. New approaches are needed to organize the complex processing of plant and animal raw materials in order to improve the economic, social and environmental aspects of the production itself, as well as the life of the population of the Republic of Kazakhstan. Despite the extensive range of processed cheeses, it is constantly updated. This is due to the need to meet the requirements of nutritional science, changing consumer demand, as well as the availability of raw materials and considerations of the profitability of a particular type of cheese. The working hypothesis of the research was the assumption that for the melting of raw materials it is possible to use reagents that affect the active acidity of the medium, stabilize the structure, bind moisture and improve the consistency and organoleptic characteristics of the finished product. The article is devoted to the issue of the process of melting rennet cheeses. The purpose of the article is to show that the melting process is closely related to different forms of raw material protein micelles. In this article, the influence of the type and amount of melting salt on the formation of the structure of processed cheese is considered, the rheological indicators of experimental products are determined in accordance with the scoring of processed cheeses. The indicator of water activity (аw) was established, the microbiological parameters of the experimental products were determined.

In Kazakhstan, within the framework of the Program «Development of domestic value and export-oriented industries», new modern dairy enterprises are being actively modernized and new modern dairy enterprises are being created, where membrane processes are being introduced to concentrate the components of milk. This is necessary for the rational and integrated use of raw materials, including through the processing of secondary resources, the main of which is whey. Improving the production processes of traditional food products and developing innovative ones is possible only with the use of the latest technologies and technological equipment. Membrane processes are widely used for the use of fractionation and concentration of liquid dairy products, which allows for a new solution to the processing of raw materials and opens up opportunities in the development of new types of food products. The article is devoted to the issue of production and processing of whey in Kazakhstan. The main types of membrane technologies and the advantages of their use in the dairy industry in the Republic of Kazakhstan are considered. The role of membrane technologies in the processing of whey is substantiated, various methods of introducing membrane processing methods to ensure the demineralization of whey, obtaining products with high biological value and consumer properties, reducing the cost of energy carriers, reducing the volume of raw materials in order to save transport costs, non-waste processing of milk solids, recycling water are described. This article analyzes the problems of using resource-saving membrane technologies in the production of dairy products in the Republic of Kazakhstan, ways to solve existing problems associated with increasing the economic efficiency of enterprises. The favorable impact of the use of membrane technologies on the social and environmental aspects of whey processing in the country is substantiated.

The main thesis of the proposed research is that in modern conditions of globalization, the realization of the right of citizens to education is an important and necessary condition for the development of society and the state. The right to education provides everyone with knowledge, skills, the development of creative abilities, guarantees the effective functioning of state and public institutions, national security, maintains stability in society and contributes to the development of a democratic, social rule of law state. The purpose of the study is to develop a holistic concept of constitutional and legal provision of the right to education in the Republic of Kazakhstan, taking into account international experience and developing proposals for improving domestic legislation regulating the right to education. The methodological basis is a system of philosophical and ideological approaches, principles, general scientific and special scientific methods that provided an objective analysis of the subject of research. The article substantiates that the state is also interested in ensuring the right to education for everyone, since it is education that creates qualified labor potential, provides training for professional specialists capable of effectively managing public affairs and performing its tasks. In turn, as a rule, an increase in the educational and qualification level of a person is the basis for salary growth, which affects the increase in tax deductions to the state budget, its filling, and therefore leads to economic growth of the state and society as a whole. The effective functioning of the education system in the state contributes to reducing unemployment (pupils, students belong to the category of the employed population), ensuring the vital activity of state institutions, national security, building a social state and establishing stability in society. Special attention in this article is paid to the implementation of scientific analysis of the right to education in the Republic of Kazakhstan in the context of modern international experience. The article makes a number of new theoretical conclusions and proposals, in particular: the signs of the right to education are classified into general (inherent in all categories of human and civil rights) and special (reveal the peculiarity of the right to education in the system of constitutional rights); the concept and content of the principles of the right to education are defined, what are the fundamental principles, ideas that determine its essence and the general direction of development.

On the territory of the Northern industrial zone of Pavlodar in the area of the industrial wastewater reservoir «Bylkyldak» in some areas of the earth there is soil contamination with mercury, exceeding the MPC for mercury (2.1 mg/kg) by 500 times. The total mass of mercury dispersed in the surface layer of soils is 2.8 tons. The mass of contaminated soil is approximately 208,000 tons. Pollution of the territory is historical. The purpose of the article is to determine the efficiency of chemical binding (immobilization) of mercury in the soil with the Japanese drug Denite® in real field conditions of the territory of mercury contamination in the Northern industrial zone of Pavlodar using an experimental study; to determine the stability of insoluble mercury compounds formed by the preparation at extreme winter and summer temperatures and seasonal fluctuations in open ground. Soil samples were taken for the study at 11 points in the centers of mercury pollution. Laboratory studies were carried out in an accredited analytical laboratory of the Testing Center of JSC Caustic. Soil samples were treated with Denite®, the preparations obtained were stabilized, and water extracts were prepared. The content of mercury in soils, extracts from them, and plants was determined by the atomic absorption method on a RA-915+ spectrometer equipped with RP-91 and RP-91S attachments. As a result of research, the effectiveness of Denite® in the chemical binding of mercury in the soil has been proven and its optimal dosages have been determined. As a result of the positive tests of the technology of chemical immobilization of mercury, the prospect of a practical solution to the issue of demercurization of mercury-contaminated soil on the territory of the Northern industrial zone appeared.

Main problem: the article is devoted to the issue of designing basic recipes for dairy products using mathematical modeling methods. The author analyzed the problems in the field of food technology and concluded that mathematical modeling is used in the following areas: clarification of technological process modes, designing recipes and assessing the quality of finished products, as well as predicting the shelf life of new products when they are put into production. The use of dihydroquercetin as a drug that prevents the oxidation of milk fat in the design of dairy products is substantiated. Mathematical modeling was carried out on the basis of experimental and analytical material obtained in laboratory and production conditions. Based on the maximum value of the objective functions, the optimal normalized mixtures and the maximum allowable concentration of dihydroquercetin were selected. The analysis of the received mathematical dependences and models is carried out, the system of linear equations is made. Purpose: to study the effect of natural bioflavonoid antioxidant on the oxidative processes of milk fat and the viability of lactic acid cultures and their associations by mathematical modeling in order to use it in the technology of a new product; conduct an analysis of mathematical dependencies and models, compose a system of linear equations. Methods: the article uses the method of mathematical analysis and the matrix method. Results and their significance: a mathematical model was developed for the dependence of the viability of probiotic cultures on the mass fraction of dihydroquercetin when designing recipes for a creamy-protein curd product, a matrix of the chemical composition of dairy ingredients was presented, and a system of linear equations for basic recipes was compiled. In the course of the study, the spatial configurations of dihydroquercetin, as well as its effect on the oxidative processes of milk fat, were studied. Mathematical modeling of experimental data on the study of the effect of dihydroquercetin on the viability of microorganisms with probiotic properties was carried out. The normalization of the complex of obtained results on the study of the influence of the mass fraction of dihydroquercetin on the fermentation process was studied. Controlled factors characterizing the process of fermentation of model media with dihydroquercetin have been determined. A rationing of the dihydroquercetin complex of more than 0.50% was established; the target function decreases to its minimum value of 0.53 with a mass fraction of dihydroquercetin of 1.00%.

The ideas of accelerated disclosure of the spiritual, intellectual and professional potential of a person have always been occupied by scientists and teachers (Ya.A. Komensky, K.D. Ushinsky, V.A. Sukhomlinsky, Ya. Korchak, A.S. Makarenko, A. Kunanbayev, Y. Altynsarin and others). Modern innovative teachers are guided by a personality-oriented approach, the ideas of subject-subject relations, and generational cooperation. Georgian teacher Sh. A. Amonashvili wrote: «humanitarian pedagogy perceives the child by his nature. He sees the infinity of the child, understands his cosmic quality and prepares him for the service of humanity throughout his life. It establishes the personality of the child through the determination of his will and builds pedagogical systems, the procedural of which predetermines love, optimism and high spiritual morality. Humanitarian pedagogical thinking seeks to take on something enormous, and this is the power of educational systems and processes that have arisen in its bowels». In order to realize the value of self-disclosure of innovative abilities of students, ensuring the role of a teacher, it is necessary to recognize the intellectual reflexive mechanism of a person as the main subject of Education. The purpose of the article is to identify innovative methods and models of pedagogical activity for the cultivation of innovative abilities of students, which determine the development of the country. The study used methods such as analysis, generalization, synthesis, modeling of scientific sources.

In the conditions of the ongoing formation of a country with a market organization of public relations, the search for means and methods of unambiguous assessment of the qualification level of subjects of both educational and professional activities is becoming more and more urgent. The problem is the inconsistency of the paradigm and methods of assessing the knowledge and abilities of subjects. Purpose of the article is to develop proposals and recommendations to overcome difficulties in the development and implementation of the National Qualification System of the Republic of Kazakhstan. The method of content-genetic logic of ascent from the abstract to the concrete, a speculative language of functional and schematic images of thought was used. A comparative analysis was carried out and contradictions were revealed in the approaches to the development of the National Qualification System of the Republic of Kazakhstan of the Ministry of Education and Science of the Republic of Kazakhstan and the Ministry of Labor, Employment and Social Protection of the Population of the Republic of Kazakhstan. Numerous semantic terminological "gluing", incorrect definitions in the developed qualification documents of such keywords as activity, employment, work, labor, profession, position, knowledge, abilities, qualifications, etc. have been established. In order to eliminate the conceptual confusion and ambiguity of the approved normative documents, it is recommended to articulate their names in the same type of task-qualification format. Relevant examples are given. A special role in ensuring a high qualification level of all subjects belongs to teaching staff. Therefore, it is recommended to improve their functional literacy, update the pedagogical paradigm and develop a system for assessing the qualification level of education workers. To ensure the unambiguity, the conceptual status of the terms used in the qualification procedures, it is recommended to use together an innovative method of content-genetic logic and a speculative language of functional schematic images that allow visualizing, checking and correcting the concepts being constructed according to the criteria of morality, logic and consistency. As an example, the scheme of logical derivation and differentiation of the concepts of position, role, profession, specialty, position, as well as a typical unit of professional activity is given.

The present stage of development of power systems is characterized by the need to increase their intelligence, that is, the formation of an environment capable of solving the problems of effective management of all components included in the power system. One of the features of modern energy systems is an active consumer, that is, a consumer who has the opportunity to optimize the schedule of loading their capacities, planning energy consumption, intellectualization of energy consumption. In addition to the fact that there are digital systems for collecting, processing and presenting information, as well as transmitting this information via the Internet, to solve the most difficult task of managing power systems, it is necessary to develop a large number of models adequate to real processes that can describe the processes taking place in the power system under consideration. The purpose is to develop models capable of adequately describing the interrelated processes occurring in the considered elements of the power system, as well as in the aggregate of related elements; development of methods that allow solving problems of effective control of elements of energy systems on the basis of the proposed intelligent models. To solve the problem of increasing the intelligence of the power system, nonlinear adaptive models of electrical complexes of an energy-intensive enterprise included in the power system were developed on the basis of balance equations and artificial intelligence methods. The production of alumina with the properties of inertia, nonlinearity and closure is chosen as the production under consideration. This type of production was chosen as the most difficult to predict due to the unpredictability of changes in energy consumption during the transition to other modes of its operation, associated, for example, with the receipt of raw materials with a different chemical composition for processing. Static and dynamic models of energy consumption of electrotechnical complexes with continuous inertial nonlinear closed production based on artificial intelligence methods have been developed, which makes it possible to eliminate the need to use long time series of retrospective data. For the considered type of continuous energy-intensive production, dynamic characteristics of energy consumption and technological processes are obtained from the main controlled parameters, which make it possible to predict emergency situations and partly man-made disasters. On the basis of a genetic algorithm, a multiparametric optimization problem of energy management of continuous production has been solved, taking into account technological parameters and cost factors.

The article is devoted to the study of the main types of retort packaging, as well as polymer and combined materials used for its manufacture. The authors have compiled a classification of retort packaging presented on the modern market, investigated the technological properties of packaging materials, and also determined the requirements for modern retort packaging: resistance to sterilization at a temperature of at least 120°C, steam and moisture resistance, chemical inertia to canned products, tightness, low gas permeability. It has been established that in order to give the retort packaging the required properties, it is made of multilayer polymer or combined materials, each of the layers of which performs certain functions. It is determined that due to the barrier properties of polymer and combined materials with respect to oxygen, retort packaging provides shelf life of canned products up to 5 years, which allows the use of retort packaging made of polymer and combined materials as an alternative to glass and metal packaging. In experimental studies, the composition of the outer layers of modern retort packaging was analyzed and it was concluded that polypropylene or polyethylene terephthalate are most often used, since these polymer materials are thermally and chemically resistant, vapor- and moisture-proof. It is established that materials that are barriers to gases are used as the middle layer – aluminum foil, metallized films, ethylene vinyl alcohol, polyamide. It is proved that polymer co-extrusion, multilayer injection molding or lamination is used for the manufacture of such materials and packaging. The data obtained indicate the high barrier properties of combined packaging materials, therefore, the thermal and chemical stability of the polymer and combined materials used makes it possible to use retort packaging for packing almost all groups of canned products.

The article discusses the experience of developing a computer video game by a team of students of the Department of Information Technology of the Innovative University of Eurasia within the 48-hour competition «48h Game Making Challenge» for creating video games, held in Pavlodar on October 27-29, 2022 in the IT-Hub building of the College of Information Technologies (93 Lermontov St.). Basic information about the event and a link to the registration form were published on the Instagram @digital_drive14 social network page and on the website https://digitaldrive.kz /. 8 teams from different educational institutions of Pavlodar participated in the competition. The purpose of the article is to comprehend the practical experience of developing a computer game. The team chose the Unity game engine as the environment and the main tool for developing a computer game. The Unity program is a popular development environment for interactive 2D and 3D content. The engine is completely free for the average user. The Unity engine was also chosen because it is multifunctional and uses a component-oriented approach, in which the developer creates objects and adds various components to them. The advantage of the engine was also the presence of a huge library of assets and plugins, with which you can significantly speed up the game development process. The graphics of the game were made in Photoshop. The music and sounds were taken from free sources. InEU team developed a computer game «Conqueror of the Moon» and became the winner of the contest «48 Hour Game Making Challenge Pavlodar 2022». During the development of the game, the team first chose the engine, developed the plot and concept of the game, created an image for the level and menu. Then the programmer developed the mechanics of the game, wrote code for control, time, dialogues, messages. The designers drew the environment, background, characters, created all the animations for the game and found music for the background of the menu and the game itself.

Increasing the yield of sunflower is inextricably linked with the evaluation of newly created interline hybrids and their components (parental forms) using various methods for assessing their combination ability (CА). Breeding research in this direction includes large material and practical costs when using the developed methods for assessing combination ability (CА) due to its small analytical capabilities. New approaches to the analysis of the productivity of hybrids in practical studies can significantly increase the volume of the analyzed material and evaluate not only for a short period of testing, but also for a long period of time over the years. Purpose is determination of the combination ability of parental forms of sunflower interlinear hybrids to optimize the breeding process. When analyzing the determination of the combination ability of the parental components of sunflower interlinear hybrids, the method of evaluating the CА according to a special scale developed at VNIIMK (Krasnodar, Russia) was used. This method makes it possible to analyze a large number of hybrid combinations and their parental forms and draw appropriate conclusions for further use in the breeding process. The analysis of the obtained results makes it possible to fully evaluate the obtained interline hybrid combinations by years of testing. We analyzed 1736 hybrid combinations involving 212 maternal forms and 1472 combinations involving 209 paternal pollen fertility restorer lines. 75 maternal lines with a high total combination ability (GCА) and 97 paternal forms with this trait were identified. Maternal lines with high combinational ability VKU 110 A, VKU 140 A and SV 55 A are of interest for use in practical breeding. Among the paternal forms are SV 123 V, VKU 400 V and VKU 401 V. The components of hybrid combinations with high specific combination ability (SCА) have been determined. These are lines VKU 414 A, VKU 413 A, SV 31 Rf, SP 1459. Hybrids with high adaptive properties have been identified when growing conditions change, which will make it possible to purposefully conduct practical breeding to maintain high productivity of sunflower hybrids

The article is devoted to the development of technological parameters for the production of gluten-free pasta, as well as to the study of the influence of physico-chemical factors on the formation of the structure and organoleptic parameters of gluten-free pasta. The authors studied modern approaches to the production of gluten-free food in Kazakhstan. During the study, the main types of raw materials used in the production of gluten-free pasta of functional orientation were identified. For the production of a new product, a reasonable choice of raw materials and functional ingredients was carried out, the formulation and production technology were developed, all temperature and time modes were described, physico-chemical, organoleptic parameters of the new product were studied, a production flowchart was developed. The purpose of the article is to develop the technology of gluten-free pasta enriched on the basis of corn, rice flour and meeting the requirements for specialized food products, with the addition of functional and flavoring ingredients to expand the range of gluten-free products in the Republic of Kazakhstan. In experimental studies, the formula of a new gluten-free paste based on rice and corn flour with the addition of flaxseed flour, soy protein isolate «EdimCo», xanthan gum, dietary fiber (psyllium), Supermak booster was developed. The complex results of organoleptic and physico-chemical parameters of whole-grain flour for the production of new gluten-free pasta are presented. The results of organoleptic and physico-chemical indicators, as well as safety indicators of finished gluten-free pasta are presented. The article presents the technological parameters and time modes of the production process of fresh pasta, including the following basic operations: preparation of raw materials at t = 10 0C, kneading pasta dough at t = 40-45 0C, vacuuming at 40-10 kPa, pressing (extrusion) at 7 min, 10-12 MPa, drying and stabilization at 10-12 MPa, cooling of dried products t = 20-25 0C 4 hours, packaging of finished products at t = 35 0C and relative humidity 70 %.

Development of regulatory and technical documentation for the examination of equipment operating under pressure

Phytopathological Assessment of Sunflower Genetic Resources in Relation to Vegetative Conditions in the East Kazakhstan Region during 2021-2023

The main problem: In the conditions of market uncertainty, the coronavirus pandemic, the absence of an officially articulated national idea, national interests and ideology in Kazakhstan, the problem of the lack of logically justified and coordinated coordinates of systemic thinking, an unambiguous paradigm of humanitarian thinking (analytical, pedagogical, managerial, economic, etc.) is becoming more and more clearly realized. as the most important conditions for personal, civil and professional self-determination. Purpose: to substantiate the general logical coordinates and methods of reformatting the ambiguous humanitarian paradigm used in the activity. Methods: the ontological principle of genetically meaningful logic, the method of transformation of concrete images of objects based on their abstract essence, the method of ascent from the abstract to the concrete, the speculative language of schematic images of thought and the language of methodological theory of activity. The results and their significance: logically justified universal abstract-concrete coordinates of universal motion are given. In relation to life and the world of activity, they can be concretized by coordinates: "standard of living – efficiency of activity", or "efficiency of activity – time", or "results – costs", or "quality – quantity", etc. The use of motion vectors in the logic of descent from the concrete to the abstract (NCA), ascent from the abstract to the concrete (AAC), as well as in their combination – logic CAC gives certainty to thinking. As an example, the scheme of the qualitative difference between educational (pre-professional) activities from professional ones using these methods and paired dialectical categories is given. The scheme and description of the functional model of the system object, considered as a rubicon of the transformation of educational activity into professional activity, are given. To reformat the indefinite, ambiguous paradigms of the humanities used in the activity into functional-logical, visible, constructive and unambiguous, it is recommended to use abstract-concrete coordinates, the methods given, the language of schematic images and the paradigm of the methodological theory of activity. As an example, the concept of a typical unit of activity development is given. A visible unambiguous paradigm is a necessary, but not sufficient prerequisite for adequate personal, civil and professional self-determination of a person in situations of high uncertainty. A sufficient prerequisite is the acquisition by subjects of appropriate reflexive-thinking abilities for self-determination, self-organization, self-regulation, etc.

Main problem: For several years, the state has been trying to reduce bureaucratic processes with entrepreneurs, make accounting transparent, reliable and with less labor costs. At the moment, without digitalization in accounting, it is impossible to predict the further development of trade and economic relations in general, since it significantly affects the sale, movement and shipment of goods. The gradual transition of the economy of the Republic of Kazakhstan to the path of digitalization can be considered the most important condition for the development of both the country’s economy and the Eurasian Economic Union. Digital inspection is the process of monitoring goods using digital systems, which helps reduce the risk of human error. In the context of digitalization, work with documentation should be structured in such a way that access to them is ensured throughout the entire limitation period, thereby facilitating the taxpayer in making the right economic decisions. The purpose of this article is to consider the gradual integration of digitalization into the field of accounting for both small and medium-sized businesses, and also to consider its impact on the business processes of organizations. The main objective of the article is to consider the introduction of digitalization into business processes and possible problems during its integration, as well as to identify ways to eliminate them without losses for both the state and small and medium-sized businesses. Methods: In the course of writing this article, a dialectical approach was mainly used, which made it possible to examine in detail the process of reflecting and controlling document flow when moving goods in the context of digitalization. Approaching the issue theoretically and summarizing practical experience, it was possible to identify the positive and negative aspects of accounting and control of the movement of goods on the territory of the Republic of Kazakhstan and beyond its borders in the conditions of rapidly developing digitalization. Results and their significance: This article reflects the main directions of modernization of accounting and operational accounting in Kazakhstan in the context of the progressive digitalization of the economy. The necessity of creating an information environment for managing economic processes and optimizing the operational activities of an enterprise is substantiated, and the positive and negative aspects of the integration of various information systems and modules for maintaining accounting and operational records at an enterprise are considered

The article is devoted to the development of technology for meat products of the "Halal" category. The authors consider the main problems of the meat industry in the field of the development of meat products of the "Halal" category in accordance with the National Program "Development of meat farming for 2018-2027", as well as the peculiarities of the production of meat products of the "Halal" category in Kazakhstan. A technology for the production of sausages for frying of the "Halal" category based on minced turkey and beef meat for functional nutrition has been developed, organoleptic, physico-chemical parameters of the new product have been studied. The mass fraction of protein is 8 %, the mass fraction of fat is 7 %. The authors of the article have developed a technological scheme for the production of a new product of the "Halal" category, which includes: acceptance of raw materials, cutting, deboning, veining, grinding to 2-3 mm of meat raw materials. At the next stage, meat is cooked at t 2-4 0C for 12 hours, minced meat is prepared (adding jerusalem artichoke 3 %, adding vitamin premix "Rovifarin" in an amount of 1.0 %, as well as spices and garlic according to the developed recipe). At the next stage, the minced meat is stuffed into natural shells with a diameter of (32-44) mm, cooled at t (4 + 2) 0C, stored at t (4 + 2) 0C for 36 hours. During the microstructural study of a sample of boiled and smoked sausage produced using traditional technology, it was found that the mass of the sample was formed from large fragments of muscle, fat and connective tissue (0.7-1.4) microns. The layout of the structural elements of the minced meat is dense, vacuoles and microcapillaries are rounded in shape, sometimes without clear boundaries, merged, with a size of (60-300) microns.

Main problem: In recent years, the world has seen the widespread impact and implementation of digitalization in all areas of activity. The financial sector is increasingly feeling the impact of this trend. Today, banks are the leaders in this sector in the use of digital innovations. In connection with current events in the world, banks needed to resort to transformation of their products. Products and services such as Internet banking, chat bots, contactless payment systems, biometric identification technologies, etc. appear and are constantly updated. The article discusses the main trends in the development of digital banking products and their impact on the performance of banks. Purpose: is to study and evaluate new digital banking products and their impact on the key performance indicators of the banking sector. Results and their significance: The directions and trends in the development of new digital banking products were studied and the performance indicators of the banking sector of the Republic of Kazakhstan were compared.

Main problem: the article raises the question of the need to create innovative methods and models of functional-system thinking and pedagogical cultivation of students' intellectual abilities to improve the quality of education. Emphasis is placed on the development of reflexive, schematic, organizational and communication abilities. Purpose: to provide an overview of the basic theoretical concepts

Main problem: The article highlights the problem of tests as methods of psychology, the influence of validity and reliability on the results of psychological research. Purpose: Uncovering the significance of validity and reliability on psychological research results. Results and their significance: Testing is an important method in psychology, allowing measuring various aspects of the psyche and behavior of a person. The history of the development of tests in psychology goes back more than a century and began with the work of Francis Galton and Alfred Binet. Over time, the tests have become widely used in various fields such as education, personnel selection, clinical diagnosis and research. Basic requirements for tests include reliability (repeatability of results), validity (measurement accuracy), standardization (same test conditions) and objectivity (lack of subjectivity in assessment). Tests must be designed using psychometric principles to ensure accuracy and validity of results. Modern tests include a variety of measurement techniques, such as tests of personality, intelligence, aptitude, and professional skills. The use of tests in psychology requires professional training to correctly interpret the results and make valid conclusions. Testing as a method of psychology continues to evolve, and its role remains key in the study of the human psyche and behavior. Testing in psychology has a wide range of applications, including assessing personality traits, identifying psychological disorders, and predicting behavior and success in various areas of life. The development of computer-based tests and online platforms makes testing more efficient and convenient for researchers and participants. Modern tests increasingly take into account cultural differences and the diversity of individual characteristics, which contributes to more accurate and tailored assessments. It is important to remember that the use of tests requires ethics, confidentiality and compliance to ensure the reliability and validity of the data obtained.

The main problem: Today, the introduction of inclusive education is becoming one of the priorities of the state policy of the Republic of Kazakhstan in the system of modern education. In accordance with the law on Education, equal access to quality education for citizens is guaranteed, taking into account their intellectual development, psychophysiological and individual characteristics. The article is devoted to the analysis of the development of inclusive education. The author considers the problems on the way to the introduction of inclusive education, provides an analysis of the experience of conducting an IT school within the framework of inclusive education. An attempt has been made to identify the factors contributing to the successful implementation of inclusive education methods in the modern educational space. Objective: To consider the issues of the development of inclusive education in the Republic of Kazakhstan. To present the methodology of teaching children with special educational needs, to suggest possible ways to solve problems on the way of introducing inclusive education into the domestic education system. Methods: The methods of analysis, synthesis and deduction were used in the article. Results and their significance: Based on the results of the work carried out aimed at identifying the main problems hindering the process of implementing inclusive education, as well as based on the results of the analysis and the identified main aspects in the cognitive activity of children with hearing and speech disorders, the author of the article proposes a methodology for teaching children multimedia technologies. In addition, the author clearly substantiates the need to prepare a teacher for the use of inclusive education methods, due to the lack of willingness of some teachers to teach in a class (group) in which people with disabilities study, fearing to get into a situation of psychological and professional discomfort.

Main problem: At the present stage of life, Innovations in the financial sector contribute to the optimization of financial intermediation and, in turn, stimulate economic growth. Financial innovations increase the efficiency of the allocation of savings capital to investment capital, as well as increase liquidity in the markets. As the digital economy has developed, the functionality of traditional large financial institutions has been partially replaced by financial technologies (FinTech). FinTech involves the convergence of traditional financial services with mobile services, social media services, big data aggregation and processing, and cloud technologies. Purpose of this article is to identify the main directions of the electronic financial services market in the Republic of Kazakhstan, identify the main problems and prospects for the development of the financial sector of the economy. Methods: The work used general scientific methods of comparative system, vertical and horizontal analysis, structural and functional method, analytical techniques, economic and statistical research methods. The results and their significance: the authors identified the main directions of digitalization of the financial sector of the modern economy, noted the role of FinTech companies and services in both theoretical and practical terms, and provided relevant approaches to the definition of this concept in the economic literature. The main reasons and factors for the development of this direction of digitalization of the financial sector are substantiated, including the concept of financial accessibility, the advantages and disadvantages of FinTech, various approaches to their classification, country and regional characteristics, and an analysis of development trends. The crowdfunding direction of FinTech is noted, approaches to its definition and classification are given, the advantages of the crowdfunding mechanism are revealed, and its role in the modern economy is analyzed. The trend of algorithmic trading development as the most important direction of digitalization of the financial sector is investigated. A detailed analysis of mobile financial services as one of the fastest-growing areas of FinTech is carried out, approaches to their classification are given, factors stimulating the growth of mobile payments, country and regional characteristics are substantiated. The main directions of digitalization of the insurance sector are analyzed, reasonable conclusions about the advantages of InsurTech are made.