his article discusses the concept, essence and purpose of judicial control over the execution of criminal penalties , as a special type of state control, its independent and important role in public administration among the ways to ensure the rule of law.

The article presents the results of analysis of the model quality «career development» and its impact on the quality of products in terms of production pipe rolling PB LLP «KSP Steel».There are defined the main factors affecting the quality of career development of the employee. A new model improving the «quality of life» is suggested.

The article consideres features of civil disputes with the banks about foreclose on hypothecary real estate. judicial practice on this category of cases.

In article it is shown that in a control system of efficiency of the company accurate focus on result and the coordinated movement of all organizational elements to the uniform purpose is. It is reached by creation of a tree of the purposes and definition of the most critical areas for control and control indicators of efficiency a consequence of that is the increase in cost of the company.

The article presents research of telemetering, remote control and regulation abroad and in Kazakhstan. The necessity of this line of research in our country.

The main purpose of the new test materials: tests, test items is an objective assessment of the level of mastery of knowledge , skills and abilities , relevant state general education standards in mathematics and the ability to apply them in real life ( in extracurricular life situations ). The article deals with technology making control gauges in mathematics at the secondary school, is an example of the development of such a meter

This article discusses some of the problems of chemical safety, such as the recycling of waste production, chemical accidents and disasters, environmental pollution and the negative effect of the chemical industry on human health, as well as methods for safer handling of chemical products.

In article made attempt to divide sites on groups in dependence from delivered problem. Proceeding from picked appearance site, circumscribed the ways of his creation. Considered the utilization of special systems management content, which independent generates programmable codes, not demands special knowledges and essential reduce the time of elaboration site

In this article the questions of quality assurance in modern construction, quality control of construction materials, methods of control testing of structures, and also the reasons of defects occurring during manufacture of works.

The paper presents essence, types of auditor risk, interrelation of its components. The article considers the reasons of risks presence and solution of the risks found by the auditor while testing computer information systems.

The article describes that the effective management of the learning process new textbooks using need to create a model of teacher action. The created model explicitly takes into account the objectives, methods, learning outcomes. With its help solve the problem of the knowledge of the student. And the problem of managing the cognitive activity is settled.

The issues of formation of scientific and methodological bases for improving healthcare organizations activity are considered, healthcare system in current market conditions are studied in this article. Such issues as competition between healthcare institutions providing medical services are also studied in this work. Main, crucial functions of control over management and marketing in healthcare institution are considered. Basic tools for improving efficiency of production capacity and financial resources of healthcare institution are suggested.

In the article it is considered the questions of mechanisms’ effectiveness of interation of mass-media and government bodies of the Republic of Kazakhstan. The main problems of these sphere are introduction of information in mass-media through the system of state purchases, directed on the prices; the lack of the system of indicators on the estimation of mass-media services quality in the process of state purchase and the problem of control, censure and self-censure caused by state purchases conditions. The study makes it clear that the introduction of the system of public procurement has expanded the practice of self-censorship of publications. In conclusion, the author suggests ways to address the problems in the interaction of state bodies with the media.

In this article the study of knowledge control patterns in math class with the help of computer-based testing. Displaying several models of construction of test tasks . Highlight the advantages of computer-based testing. The theoretical foundations of mathematical modeling.

The paper presents the thermal design of the building heating system of a four educational building № 1 Eurasian innovative university.Data are presented for the period from 1 December to 28 February for three seasons: 2013–2014, 2014–2015, 2015–2016 years. On the basis of the actual thermal design graphics and design of heat were built in the period from 1.12. at 28.02 for three seasons (2013-2014,2014-2015, 2015-2016 years). In these graphs clearly visible difference between the two values. According to calculation, the average difference was 13.02 % of the actual heat consumption.

Education is one of the priority directions in the development of our state. It is impossible to talk about modernization of education without monitoring its quality. The article considers a differentiated approach to learning, the conditions under which this approach can be applied. Two main criteria of the differentiated approach are singled out: level of training and learning ability. The article gives recommendations on the phased implementation of differentiation. Positive and negative parties of different types of control of education quality are also presented. Most objective is the differentiated test control. The article reveals its characteristics, the possibilities of using it in lessons in primary school.

The article considers the most important principles of government control in the field of physical culture and sports. The analysis of the main aspects of the implementation of the state policy in the field of physical culture and sports of the Republic of Kazakhstan is given.

The presented article examines the demographic processes taking place in the Republic of Kazakhstan, which characterize the demographic situation in Kazakhstan. And also the objectives and tasks of the state, the main of which is the management of demographic processes and development of the effective type of population reproduction are considered. The population policy covers a wide range of problems of reproductivity, the creation of the composition and structure of labor resources and their effective application. In a narrow sense, the demographic policy should be understood as the impact on the reproductivity by means of socio-economic activities that affect the demographic processes. The dramatically limited resources make it impossible to solve the government control problems of socio-demographic processes, employment, and unemployment in the required degree.

This article describes the mechanism of budget management. The tools to improve the efficiency of budget revenue have been identified. The material is presented as exemplified by the budget of Zhelezinskiy district. The transition from budgeting based on the principle of "cost control" to the formation according to the principle "management by results" is justified. In this regard, in the financial sector a new concept – result-oriented budgeting (ROB). The tree of problems of the state financial control and the ways of their solution are offered. The article has practical importance, since the problems described in a currently particularly relevant.

The article analyzes the role and effectiveness of monitoring in the system of ensuring tax revenues to the budget

The article describes visually detectable anomalies in the structure of the crucian carpet, which make it possible to consider them as a reliable tool for operative ecological monitoring of aquatic ecosystems under the conditions of the anthropic press. The results of the conducted studies were tested in the course of the research "The Post-Mercury Control of Mercury Pollution in the Territory of the Former PO" Khimprom", and also appear to be important in assessing the environmental risk from groundwater pollution and adjacent water bodies in the northern industrial zone of Pavlodar.

The purpose of the work is the creation of an information system that allows to carry out activity on accounting and keeping statistics on the means of measurement used in production. An analysis of the use of such a system at a number of large industrial enterprises is performed. The database and the program working with a database of means of measurement on required technological positions and maintenance are developed. The program provides graphs on the accumulated statistical data.

Introduction of the quality management system is an important step for any production. Not only has the competitiveness of enterprise but also further successful development depends on the result of introduction of the quality management system and its proper functioning. Due to a quality management it is possible to obtain not only the improvement of structure of organization but also processes and their results quality. The aim of the article is to study the role of the quality management system in steady development of enterprise and problem of introduction of the quality management system in our country.

The article is devoted to the current problem of quality control and safety of dairy products. The article provides a generalized description of the system models, discusses the main problems and advantages in implementing the quality control system in small and medium-sized dairy enterprises.

The article is devoted to risk analysis, methods of ensuring dairy products safety. Furthermore, the author dwells on such tool of quality control as a decision tree. The article presents the plan of HACCP for a diary enterprise on an example of the production a sour cream with 15-20 % of fat content.

The article analyzes the system of development, design, storage and operation of normative and technical documentation in regional university. Measures are proposed to improve the quality control of normative and technical documentation, including a project to improve the quality control of technical documentation.

The possibilities of using controlled transformer-type shunt reactors at power grid substations to optimize the transmission mode are considered. The laws of voltage regulation, providing the mode of natural power and reduction of active power losses in the electrical system, are highlighted. Key words: energy complex, controlled transformer-type shunt reactor, voltage stabilization, thyristor voltage controller, control winding.

Аt present, dairy enterprises use a system for analyzing and monitoring critical control points, as well as a quality management system, to produce high-quality and safe products. These systems take into account factors that may affect the production process and other components by identifying hazards from the procurement of raw materials to the consumption of products for food. The purpose of the article is to study the role and necessity of applying quality and safety management systems at dairy enterprises and reducing the risk at all levels of production

In the work measures on preparation of production personnel for actions in the conditions of emergency situations are considered on the example of Neftekhim LTD LLP. The structure of the control system and its main components were studied, the regulatory legal framework used in industrial safety was described. The possible risks and dangers, as well as harmful substances used in the production of plant products and their effect on the body were studied; the current state of the control system in the field of emergency prevention was evaluated

Nanotechnology is a field of fundamental and applied science and technology dealing with a combination of theoretical substantiation, practical methods of research, analysis and synthesis, as well as methods for the production and application of products with a given atomic structure through controlled manipulation of individual atoms and molecules. In the Address of the President of the Republic of Kazakhstan to the people of Kazakhstan Strategy "Kazakhstan-2050" New political course of the state, the leader of the nation, N.A. Nazarbayev, defines 10 tasks that Kazakhstan faces, one of which is the transition of Kazakhstan to the third industrial revolution. Nanotechnology is one of the branches of the industrial revolution. In the modern world, over the past few years, there has been a rapid development of nanotechnology. The peculiarity of nanotechnology lies in the possibility of their application in an unlimited sphere; therefore they are the basis for a completely new technological order of the economy. Сonsequently, its development in the country is regarded as a particularly important sphere of science. Usage of nanotechnology products will save on raw materials and energy consumption, reduce emissions to the atmosphere and, as a result, will contribute to sustainable economic development.

This work indicates the need for theoretical and practical features of the organization of state audit and financial control, developed proposals and recommendations for improving the procedures for state audit and financial control.

During the preparatory activities for the preparation and conduct of the KShU, the civil defense plans for peace and wartime were adjusted and clarified, the calculations of forces and resources for conducting emergency response activities were refined and their readiness checked. Checked the combat readiness of the units taking into account work in extreme conditions and the provision of personnel with equipped interchangeable clothing. Additional briefings have been organized on compliance with safety measures for fighting fires and performing emergency rescue operations. Autonomous sources of energy supply, stocks of material and technical, food reserves were checked. In general, the forces and facilities of the units of the Service are on daily round-the-clock alert duty and are ready to meet the set tasks for eliminating emergencies and situations at the first alert.

In this article we have studied the actual problems of the Republic of Kazakhstan in the field of legal regulation and counteraction to trafficking and drug addiction. The aim of the study was to study the problems leading to modern drug situation and determine the possibilities of their solution. The annual decrease of the registered acts in this area, at decrease of the solved crimes is established. There is an increase in synthetic drugs among young people, which go through the Internet. The results of counteraction to the fight against drugs were the elimination of organized criminal groups, detection of smuggling and legalization of income from drug trafficking and a set of preventive measures of various directions. It is proposed to continue to improve the legislation to ensure effective social and state control over synthetic and other drugs. To develop a comprehensive program aimed at the prevention of modern forms of drug addiction and the fight

The article provides a mathematical description of an induction motor with a device for indirect control of the electromagnetic moment and angular velocity of an induction motor in an electric drive, which allows substantiating on its basis a method for controlling the output variables of an asynchronous electric motor. A simulation model of an induction motor with an indirect control device for the output variables of an induction motor and the main results of the study are presented.

On the basis of research on bacteriological indicators of the water supply system in the Ekibastuz region for the period 2016-2018 the 310 cases of detection of pathogenic microflora were identified. The chemical indicators are given the results of research to determine the content of toxic elements and heavy metals in the source and purified water, as well as in the distribution network of Ekibastuz. The largest number of pathogenic microflora cases and a high concentration of chemical elements are noted during the flood season. Sporadic pathogenic microflora and chemical elements are also recorded in the winter and summer periods.

This article discusses the idea of developing a functional product that exhibits biologically active, bifidogenic properties and a strong antioxidant effect. The authors propose the formulation of sea buckthorn marmalade with the addition of immobilized probiotics. The jelly-fruit marmalade formulation is used as a control sample; apple puree is replaced with sea buckthorn concentrate, sugar and molasses with fructose. In experimental samples, various methods of introducing probiotics are used and their viability in the finished product is further evaluated. According to the organoleptic characteristics, the samples have a pleasant taste, smell, original color, gelatinous consistency. The best viability was shown by microorgan isms immobilized by incorporation into the gel.

In this article, the author examines the problems of legal regulation of public procurement in a state of emergency and quarantine measures. The purpose of this article is to study the changes that have appeared in the legislation of the Republic of Kazakhstan in connection with the introduction of the state of emergency and quarantine in the country. The author provides a legal assessment and analyzes the new norms of Kazakhstani legislation regulating public relations in the field of organizing public procurement. The closure of state borders, the violation of the usual, accumulated over the years, economic ties led to disruptions in the economic activities of state bodies. With all the disadvantages that took place, the positive factor was that the demand for the goods of Kazakhstani producers on the market increased. The introduced new method of public procurement using framework agreements made it possible, in turn, to ensure the guaranteed sale of products of Kazakhstani commodity producers, and also made it possible to apply import substitution of frequently purchased goods. In this article, the author, on the basis of a study of the current practice in this area, demonstrates the features of legal regulation of the sphere of public procurement in completely social new conditions with the help of novelties in legislation, and also reveals the features of the operation of legal norms regulating the sphere of public procurement of goods, works and services in conditions of a state of emergency and quarantine measures. The adoption of special measures by the Government of the Republic of Kazakhstan made it possible to transfer financial and economic relations in the state to a new format – "customer-supplier". The measures taken by the government have now been extended until the end of 2020. These measures on the part of the Government of the Republic of Kazakhstan made it possible to introduce a sparing legal regime for regulating this area for representatives of medium and small businesses, in order to minimize the losses of the latter arising against the background of the introduction of a state of emergency and quarantine measures. Taking into account the analysis of judicial practice in the consideration of cases on public procurement, the author emphasizes that in conditions of quarantine measures in Kazakhstan, as a rule, there are violations of the same type, both on the part of customers and on the part of suppliers.

When managing a filling station chain, it is necessary to solve the following tasks in dynamics: determining the volume of purchases by types of oil products sold and redistributing the available volume of various types of oil products to filling station chain. The peculiarity of this control task is that the replenishment of the storage of oil products is carried out centrally, and the sale of each type of fuel is carried out at separate filling stations of the network, that is, in many points. At the same time, the volume of each type of fuel sold by each station of the network should be taken into account separately, taking into account the seasonal demand for a specific oil product. In addition to modeling demand, information is needed on the volume of petroleum products that can be purchased from suppliers with the possibility of increasing or decreasing the volume of purchases due to demand. To solve this problem, a list of suppliers of a specific type of oil product with a possible range of supply volumes must be determined. In the proposed model, an attempt is made to solve the above problems. To solve them, a management model was developed, which was implemented using the Visual Studio C # programming environment and MS SQLServer DBMS. When developing the structure of the database tables, the task of managing a network of filling stations based on the Petri net was taken into account: that is, the database tables provided for storing information on the volumes of supplies of petroleum products, the volume of sales of each type of petroleum product, as well as the time of deliveries and sales. To solve the problem of centralized procurement for all types of fuel, the database provided tables with information about suppliers and possible volumes of supplies by them of various types of petroleum products. To solve the problems of forecasting demand, the model includes algorithms for predicting the volume of sales of petroleum products based on the accumulated time series of data for each type of fuel separately. The forecasting was carried out in order to assess the required volumes of purchases of oil products for the coming period. The prediction algorithms are implemented using two methods: linear approximation and exponential smoothing. Both algorithms take into account the seasonality of demand.

The article is devoted to the mathematical modulation of a complex of experimental data obtained in the process of experimental studies of processed cheese products, processed by mathematical methods. The purpose of this study is to establish the type and amount of the melting salt that promotes the formation of the plastic structure of the processed cheese product. The analysis of scientific research in the field of food technologies showed that mathematical modeling is used in the following areas: clarification of the modes of technological processes, design of recipes and assessment of the quality of finished products, as well as forecasting the shelf life of new products when they are put into production. The most relevant in describing the processes of food production are models of multivariate variance-regression analysis using methods of mathematical planning of the experiment. The authors carried out mathematical modeling and established graphical dependencies characterizing the degree of influence of the regulated factors X1 and X2 on the controlled ones that determine the quality and safety of processed cheese products. It is important that the mathematical analysis of the graphical dependences of the rheological parameters on the adjustable factors indicates the reliability of the data obtained. It is concluded that an increase in the melting salt dose leads to an increase in the – limit shear stress, which reflects the nature and state of the consistency of the processed cheese product. The process of normalization of the controlled factors by the maximum value was carried out. Graphical dependencies were built and regression analysis was performed, the results of which allow an objective assessment of the degree of influence of the type and dose of the melting salt on the chemical and organoleptic characteristics of the test products. The authors have proven that the optimal efficiency of transforming the structure of the constituent components of the recipe into a plastic structure of a processed cheese product that is stable during storage is provided by a combination of adjustable factors X1 (Solva 85) and X2 (Solva 120) taken in a ratio of 1: 1, with a total amount of 1,2 mas.%. At the same time, the quality indicators of the experimental products are characterized by the following values of the controlled factors: У1 – 1280 Pa; У2 – 9 points, У3 – 9,301 (2,0-2,2109 colony forming units /g).

Main problem: Presence of acidic chemicals such as carbon dioxide and hydrogen sulphide, composition of production fluids triggers corrosion. Corrosion in oil and gas industry leads to deterioration of equipment since most of equipment is made of metal alloys. Application of inhibitors is one of the corrosion mitigation methods that needs to be controlled because it is important to identify optimal concentration of the chemicals in production fluids.Residual chemical analysis plays an important rolein identifying the appropriate dosage of corrosion inhibitors and its correction. It is imperative to find the most optimal concentration of amines due to the fact that both overdose and underdose could lead to equipment deterioration. The chemical analysis is hindered by complexity of mixtures that are applied in petroleum industry. Purpose: The main purpose of this article is to find out the most effective method of residual chemical analysis for inhibitors used against sweet and sour corrosion by studying and analyzing corresponding literature review. The analysis should be carried out with robust, sensitive, and accurate instrumentation. Methods :Theoretical study of composition and mechanism of amines used in oil and gas industry as corrosion inhibitors and selection of appropriate instrumental analytical techniques for the residual analysis. Results and their importance: After careful studying and consideration of modern instrumental analytical techniques the most optimal and efficient method in terms of robustness, time saving and cost was selected. Ion chromatography is an adequate method to carry out residual chemical analysis for amines that are used as inhibitors in oil and gas industry to prevent sweet and sour corrosion.

Complex research is carried out on the rational use of natural pastures with seasonal use in a specific area. The research was conducted in 2015-2017 on the lands of “Batyr” farm in Korday district of Zhambyl region. The pasture lands of the farm consists of 5 independent sites and are located in 3 geographical areas: foothill-steppe (950 hа), foothill-dry steppe (1370 hа) and foothill-semi-desert (1880 hа). The total area of distant pastures is 4.200 hectares. As a result of conducting of geobotanical researches, the farm territory of peasant farm "Batyr" in Korday district of Zhambyl region was divided into seasons (spring-summer-autumn) of their use, the yield of natural herbage and live weight gain of animals was determined. Results of accounting of productivity of natural herbages on zones, seasons of year are given in article and the gain of livemass of animals for the pasturable period is defined. When determining efficiency of sheep it is revealed that higher additional weight of a liveweight is received in experimental group of animal. The seasonal pasture on average in three years of researches at the end of the pasturable period provided an increase of a live weight of rams on 3.370 kg/head at ewes on 8.020 kg/head and lambs of birth year on 8.640 kg/head is more in comparison with control groups of animals. It should be noted that for the pasturable period the increase of alive mass of animals in experimental group in 2017 is higher than a research in comparison with previous years. In 2017 at a pasture of animals on seasonal sites it was applied intra seasonal pasture turnover at which unproductive driving of animals in search of a forage on the grazing square is practically reduced three times, besides degradation of the pasturable territory is completely excluded. It was found that the use of seasonal use of pastures provides more weight gain studied animals compared to animals that graze in one place with an unsystematic manner of grazing. The implementation of the results created the conditions for the restoration of degraded pastures with an increase in the growth and development of vegetation cover up to 15-18 % and an increase in livestock production through rational grazing up to 12 %.

In the last decades of the twentieth century, in the national economy of many countries, organochlorine pesticides were most widely used, characterized by stability in the external environment, the ability to cumulate in various tissues of organisms. Lindane (the gamma isomer of hexachlorocyclohexane) is listed as a restricted persistent organic pollutant and is an ecotoxic substance with severe and chronic effects on the human body. The study of the effect of lindane on carbohydrate metabolism at the present stage is still insufficient. This fact led to the study of the effect of γ-HCH on the insulinogenic function of the pancreas in in vivo and in vitro experiments. In experiments in vivo, the animals of the experimental groups were once orally administered γ-HCH at a dose equal to 1/5 DL50. Isolated pancreatic islets, precipitated in vitro and fixed on mica plates, were exposed to γ-HCH in amounts equivalent to 1/5 to 1/4 DL50. Paraffin sections of pancreatic tissue from experimental and control animals were stained with aldehyde fuchsin according to Gomori, and tissue preparations were also examined by a highly specific method for detecting insulin in β-cells using diethylpseudoisocyanin staining, followed by examination of the preparations in the ultraviolet light of a luminescent microscope.The same methods were used to study preparations of isolated pancreatic islet tissue on the 4th day of cultivation. The influence of orally administered γ-HCH on the level of immunoreactive insulin in the blood of experimental animals was also studied. The insulin level was determined by the enzymatic-immunological method. The concentration of IRI was established before the start of the experiment and 4-4.5 hours after acute inoculation. Results and their significance. In the study of stained preparations of the pancreas of experimental animals, numerous islets of ordinary sizes were revealed, the cytoplasm of which was filled with aldehyde-fuccin granularity in quantities indistinguishable from those observed by microscopy of preparations of control animals. The value of the fluorescence coefficient in the histofluorimetric study of the control and experimental preparations did not differ significantly. However, the content of IRI in the blood serum showed a distinct decrease in the first hours after priming. In experiments in vitro, when studying the effect of γ-HCH on cultured tissue, introduced into the nutrient medium on the second day, in the field of view of the microscope, single, small pancreatic islets were revealed. Their number on a constant area of the plates was significantly lower than the value of the same indicator in the study of control preparations. Thus it has been shown that γ-HCH does not affect the histostructure of the endocrine pancreas, but causes a significant decrease in IRI in the blood serum, as well as a change in the histochemical characteristics of cultured β-cells.

The COVID-19 coronavirus pandemic has brought about a new economic reality, to which every economic entity must adapt, regardless of the scale: within a region, a country, or the whole world. The article examines the regional economic mechanism in the context of the pandemic in the context of the interaction of the market mechanism of self-development and the control influence of the regional authorities. The destabilization of the economic situation in the regions as a result of the pandemic and related restrictions poses the problem of revising the main directions of regional policy To achieve the set goals and objectives, the general methods of empirical and theoretical research were used: analysis, synthesis, induction, deduction, generalization, description. Three spheres play a key role in the economy of Pavlodar region: industry, trade and transport. Just how to remain positive dynamics in terms of industrial production and maintained the services will depend on the development of the region, the main indicators which are discussed in this article through the prism of the events in the context of the pandemic. The necessary health measures taken in response to the pandemic have led to a severe reduction in mobility and are accompanied by high economic costs. The quarantine measures have had a direct impact on businesses, especially microbusinesses. To support this sector, tax incentives were provided, lending was expanded, and measures were taken to further facilitate the business environment. The article reflects only a small list of issues that required changes in the economic mechanism in the context of the pandemic and the introduction of restrictive measures, as well as the strengthening of the influence of external control on the economy. At the same time, the state as whole and individual regions, taking into account their potential and the actual situation in the economy, need to find an optimal balance between the prohibitions and restrictions imposed to ensure the safety of human health and the preservation of the economy in a functional mode, work and income of employees. This problem of finding a balance between prohibitive and permissive measures requires further analysis. At the same time, the state needs to develop and apply tools of a systematic nature, focused on the long term.

The data of calculating the actual cost of production are widely used in production management at industrial enterprises, to monitor compliance with the standard cost of production adopted by the enterprise, to identify ways to optimize labor costs and material resources. The level of cost depends on the activity of an industrial enterprise in a market economy: the amount of profitability, the economic efficiency of its activities. The choice of the method of cost accounting and calculating the cost of production depends on the specifics of the technology and organization of production, as well as the requirements of the efficiency of enterprise management. Studying the formation of accounting information when calculating the cost of production by type of product, comparing the level of costs with the revenue received makes it possible to determine the economic efficiency of production. The purpose of this study is to identify the problems of forming accounting information when calculating the cost of production for making decisions to reduce costs. The implementation of the research goal is facilitated by the use of methods of comparative analysis, synthesis, and graphical method for visualizing the results obtained. When considering the cost calculation, attention is paid to the fact that in market conditions there is a need for detailed cost accounting and calculation of the cost of production. If we take into account that in market conditions, prices for products are formed as demand increases, and demand is influenced by external factors, then we can only influence the costs based on the cost calculation. The basis for making effective management decisions will depend on how reliable and to what extent the accounting information is formed. Costs are the main constraint on the profit of industrial enterprises, since the main strategic goal of any enterprise is the mechanism for increasing profits. The ability to achieve this goal is limited by the following internal factors: the complexity of the cost grouping, technological processes, and the impact on product quality. It is necessary to improve the information system, which is based on the data of primary documents, document flow and the order of cost grouping. The proposed measures will contribute to strengthening the control function of the management and, as a result, effective cost management.

The main task of microbiological study of pulmonary patients is to identify the etiology of acute and exacerbation of chronic disease in order to determine therapy and control its effectiveness. Classical methods of microbiological research consist in isolating a pure culture of the causative agent of the disease with its identification by biochemical, antigenic and other characteristics. Such studies are multistage; they impose rather strict requirements on the quality of the source material, the timing and conditions of its transportation, laboratory equipment and the precise execution of the research methodology for at least 3-5 days. Isolation of the culture of a number of pathogens (atypical intracellular microflora, anaerobic bacteria, mycobacterium tuberculosis) requires even more lengthy studies using special media and equipment. This article presents the results of a bacteriological study of pathogenic microflora in diseases of the respiratory system of the population of the Shcherbakty district of Pavlodar region for 2017-2019, including the following sequence: microscopy of native and Gram stained smears; inoculation of biological material on nutrient media for isolation and identification of the pathogen; determination of the sensitivity of the isolated microorganism to antibiotics; immunological (serological) research methods aimed at determining antigens of microbiological origin, as well as antibodies to them in the patient's body. It has been shown that conducting bacteriological studies in accordance with the requirements of regulatory documents allows obtaining reliable and comparable results necessary both for the optimal treatment of patients and for collecting and analyzing data on monitoring the emergence and spread of diseases of the respiratory system caused by pathogenic microflora.

The article presents the results of implementing a quality management system at the enterprise. The study and analysis of the international standard ISO 9001:2015, as well as sanitary and epidemiological requirements for production control were carried out. The main requirements and rules for the implementation of input, operational and output control of products at enterprises at all stages of the product life cycle were identified and presented. In addition, it was determined what requirements must be met by enterprises to implement a quality management system. It is important to note that this work is necessary at the enterprise, as it has the following advantages: by improving product quality, product sales increase, the level of management of the enterprise and personnel increases, and cost savings are realized at the stages of development, production and operation. It follows that to implement a quality management system, it is necessary to set the following tasks: describe the company's processes, develop performance criteria and evaluate processes, develop the necessary documented information, implement documentation in all departments, familiarize them with the quality policy and goals, conduct timely internal audits for further SWOT analysis, and conduct an assessment by an external auditor in order to obtain a certificate of compliance. An important step in quality management is that the organization should not eliminate nonconforming results of processes, but should identify potential nonconformities, assess the risk with the preparation of a Protocol, plan and implement actions to reduce risks. Difficulties may arise: lack of understanding by the staff of the need to implement a quality management system, lack of a clear vision, mission, lack of complete information on processes, lack of quantitative and qualitative evaluation criteria, quality is defined as the quality of products, not as the quality of processes, resources, lack of monitoring of customer satisfaction. It is possible to overcome these difficulties only with the implementation of the quality management system according to ISO 9001, since the requirements prescribed in the international standard are a real tool for improving the efficiency of the enterprise, which will help bring the organization to a higher level of development.

Currently, close attention is paid to industrial safety at hazardous production facilities. Compliance with industrial safety requirements is directly related to the risks of accidents that can lead to man-made disasters, negatively affect the health and life of the population. As in any other industry, there are problems in ensuring industrial safety. There are several reasons for this: the backlog of standards from scientific and technological progress, the exclusive competence of state authorized bodies, and the lack of a risk-based approach. After the collapse of the USSR, the requirements of industrial safety in the Republic of Kazakhstan have practically not changed: laws and statutory instruments (hereinafter-the LSI) are approved and put into effect, after which they are constantly changed and supplemented; the presence of national and international standards, which, in fact, are revised on the basis of the USSR standards, taking into account the influence of the realities of the time. It can be concluded that the current standards are not focused on the future, scientific and technological progress, innovation, so they are constantly undergoing changes, thereby adapting to the necessary requirements that dictate modernity. State regulation does not contribute to the effective development of industrial safety. This is due to the fact that the state performs exclusively supervisory functions (thus it is exclusively educational in nature), and there is no dialogue between authorized state bodies, expert organizations, scientific organizations, and testing laboratories. If we consider the experience of the Russian Federation in the field of industrial safety, then it makes no sense to accept even some experience, since: similar to the Kazakhstan’ LSI and regulatory and technical documentation (and their constant dynamics), the development of cooperation with the Russian Federation within the framework of the Eurasian Economic Union. Accordingly, it is advisable to consider the experience in the field of industrial safety in Europe and the United States of America because of the effectiveness of regulation and supervision than in the Republic of Kazakhstan and the Russian Federation. This article provides information about international experience in the field of industrial safety in the United States and the European Union. The tasks of state regulation in the field of industrial safety in the Republic of Kazakhstan, the Russian Federation, the United States, and the European Union are described in detail. The analysis of normative-legal acts and normative-technical documentation is carried out. Based on the analysis of international experience, solutions to problems in the field of industrial safety for the Republic of Kazakhstan are essentially presented. The purpose of this article is to reveal the problem in the field of industrial safety in the Republic of Kazakhstan and international experience that the Republic of Kazakhstan can borrow in order to effectively ensure industrial safety. Study of international experience (USA, EU countries, Russia) in the field of industrial safety in terms of: analysis of standards; regulation (control and supervisory functions) to ensure safety. The results of this article will reflect the problems that hinder the effective provision of industrial safety in the Republic of Kazakhstan and essentially suggest ways to solve them.

The article considers international experience in automating the system of land relations, aimed at improving the quality and reducing the time for the provision of services by state bodies to citizens and organizations, providing access to information databases, which positively affects the development of effective government decisions for the effective use of land resources, and also improves social welfare. In Kazakhstan, the transfer of land cadastral information to electronic media continues, and the automated information system of the land cadastre is being improved. The task of creating a unified mechanism for state cadastral registration of land plots according to uniform rules and technologies for all, identification and individualization of land plots and objects of immovable property firmly associated with them, for subsequent state registration of rights to land plots and transfer of information to the territorial bodies of the State Revenue Committee, remains relevant. To study the experience of developed countries in the provision of public services in the system of land relations through the development of official land information systems. The article used general scientific methods from general to concrete one, synthesis, theoretical generalization, induction, deduction, and system analysis. Based on the studied experience of developed countries, relevant conclusions and proposals were made: information technology is a useful tool and can help overcome bureaucracy, backwardness, isolation, monopolistic practices, and inefficiency in the public and private sectors; the use of state bodies for effective regulation of geographic information (GIS) systems that allow solving a wide range of tasks, as well as the use of modern information technologies, contributes to the transition of the activities of state bodies to a qualitatively new level of state control, which allows for full transparency of information about the land fund and objects real estate of the country, as well as its availability to the population. The provision of public services in the field of land relations using information and communication technologies reduces entry barriers and transaction costs in business, increases competition, and improves mechanisms in this area.

Main problem: The unfavorable conditions in which a significant part of the population of our country lives (living in conditions of harmful, stressful, physical, chemical and radiation effects), an imbalance in nutrition dictate the need to create a variety of functional products enriched with pro– and prebiotic factors. In the science of nutrition, a functional direction has been developed - this is nutrition, which provides for the consumption of such products of natural origin, which, when used daily, have a regulating effect on the body as a whole, its certain systems, organs, providing a drug-free positive correction of their function. Compared with traditional types of dairy products with high organoleptic and commodity characteristics, produced on the basis of classical technological techniques, dairy products of the new generation should have increased nutritional and biological value. The article is devoted to the research and development of the technology of a new cottage cheese product - cottage cheese paste produced with the addition of lactulose concentrate and fruit and berry fillers. This article discusses the steady trend towards the use of fermented milk products with functional properties in the diet of modern humans. Purpose: Study and development of technology of thermized cottage cheese paste enriched with prebiotic lactulose and fruit and berry fillers. Methods: Analysis and generalization of theoretical information, organoleptic evaluation, physicochemical methods of analysis, microbiological methods of evaluation of cottage cheese paste, quality control of the finished product. Results and their significance: The positive role of prebiotic substances in the vital activity of the macroorganism was studied. It is not for nothing that academician Andrei Georgievich Khramtsov once called lactulose "a miracle made of milk." Lactulose, being a strong bifidogenic factor, allows stabilizing the microflora of the stomach. Lactulose activates the growth of bifidobacteria, which take root well in the intestine and ferment lactulose to form lactic acid. Lactic acid suppresses the development of pathogenic and putrefactive bacteria. As a result of the conducted studies, it was determined that the cottage cheese paste enriched with lactulose had high quality indicators and retained its consumer properties during the entire storage period. The introduction of lactulose into the recipe of cottage cheese paste does not reduce the nutritional advantages of the finished product.

The sustainable socio-economic development of the regions is determined by a number of factors, including the implementation of an effective budget policy, which plays a special role for the performance of social functions, regulating Inter-level organizational relations, strengthening the economic and financial independence of the regions.Effective management of budget policy makes it possible to purposefully use the mechanisms of budget regulation at all levels of management. At the same time, it involves the implementation of a number of functions, of which the control function is the most important. In the system of economic relations, it is assigned to a specialized financial body – the Treasury. Topical tasks are: regulation of budget flows in the region, strengthening control over the receipt and targeted use of budget funds; improving inter-budgetary relations; increase the revenue base of budgets by increasing their collection; etc. In the process of solving these tasks, a number of managerial, organizational and methodological problems arise, the solution of which contributes to improving the effectiveness of the budget policy of the region and, as a result, its economic development. Objective - to study the regional specifics of the implementation of budget policy in terms of the formation and execution of local budgets on the example of the Pavlodar budget, identify the existing problems in the region and determine the directions for improving the budget process. The methodological basis of the study is formed by general scientific and special methods of cognition: analysis and synthesis, deduction and induction, historical, logical, structural-functional and comparative analysis, as well as individual scientific methods: statistical-economic and computational-analytical. The formation of the local budget is carried out through the application of a single methodology, a single budget legislation and orientation to the Strategic Development Plan of the Republic of Kazakhstan until 2025, developed for the implementation of the main document of the state planning system for the medium – term period-the long-term development strategy of Kazakhstan until 2050. The implementation of all the tasks set out in the strategic development plans of the Republic will begin at the level of local budgets. The solution of State tasks is guaranteed, first of all, to meet the needs of the population at the local level. The role of regions in the entire process of reproduction cannot be overestimated, so the independence, flexibility and high degree of efficiency of using budget funds at the local level is the key to the successful development of society, production and business in any territory.

An analysis of the mechanical, chemical and pyrogenic impact of the Baikonur Cosmodrome on the environment showed the presence of man-made impacts of the first stages (FS) used on the ecosystems of the impact zones (IZ). This article presents the concept of a controlled landing of spent launch vehicles with liquid rocket engines (LRE) in the expected zones of damage to the ecosystems of the area while maintaining the energy-optimal launch scenario of the launch vehicle. Purpose of the article - development of effective technologies for reducing the anthropogenic impact during launches of promising rockets from the Baikonur Cosmodrome based on theoretical and experimental studies of innovative technologies: reducing the area of impact of parts from launch vehicles; fire and explosion safety, no danger of rocket launchers; controlled descent of used first stages; To solve the problem, it is proposed to create an additional IASM, which will be included in the environmental management system of the Baikonur Cosmodrome. Possible design solutions are proposed based on the evaporation of untreated liquid waste from the tanks of separated parts, their fire and explosion safety, and the use of the obtained vapor-gas mixtures for controlled unloading of separated parts while moving along the landing trajectory to the optimal area. The authors of the article have developed evaluation criteria that characterize the main environmental indicators of the studied areas: fire hazard, soil cover and impact on vegetation are studied for inclusion in the IASM. There are objective requirements and basic rules for the creation of HIASM, which is an integral part of the environmental management system of the cosmodrome.

Main problem: Today electronic information is one of the important resources in the management system. Electronic information resources are not only means, but also control flows. For example, any instruction or instruction in the management system is actually a guide to action. At the same time, for example, data on the movement of an object (employees, goods, money, etc.) are information resources, the storage and accounting of which is the basis of the organizational process. Large flows of information require their structuring, and operations on them become time-consuming. One of the ways to solve this problem is the development and implementation of an information system. Purpose: To analyze and design an information system using specialized tools designed to optimize the implementation of the above stages of software system development, using the example of a real business process. Methods: The article discusses the methodologies of CASE tools designed to automate software development processes, namely, the first two stages of the life cycle: analysis and design of a software product. The analysis and design of the business process functionality is carried out using the IDEF0 functional modeling methodology. The design of the database structure of the information system was carried out using the methodology of semantic (information) modeling IDEF1X. Description of the scenario of the designed software for a real business process is carried out using the dynamic modeling methodology IDEF3. Results and their significance: The article substantiates the relevance of the use of modern CASE-technologies in the process of analyzing and designing a future information system, as well as for the purpose of possible optimization on the example of a real business process "Inventory accounting". As a result, a comprehensive business process model was built using tools based on CASE-methodologies. The resulting model, as well as the description of its construction, is a clear example of the use of CASE technologies for software developers, as well as system analysts and IT specialists.

Main problem: Bird droppings and animal manure contain acids, nitrogen, phosphorus and potassium, heavy metals. The content of nitrogen, phosphorus and potassium changes dramatically depending on the quantity and quality of the feed. Purpose: To study the effectiveness of the use of organomineral fertilizer from poultry waste, obtained using biocatalytic processes on the growth and development of plants. Methods: An application for a Patent for the invention of the Republic of Kazakhstan "Method of obtaining organic fertilizer" has been submitted for the developed technology for obtaining organic-mineral fertilizer. In the soil intended for growing seedlings of tomatoes of the “Pepper-shaped Orange” variety and peppers of the “Bogatyr” variety, the resulting fertilizer was applied in the amount of 1 kg per 1 m2 of soil, which was dug to a depth of 8-10 cm and used to grow seedlings in closed ground and subsequent for planting it in open ground. Soil without fertilization was used as a control. The process of soil preparation for open ground, intended for planting seedlings, was carried out for the experimental field with the introduction and control without fertilization. Experimental and control studies were carried out under equivalent climatic conditions, the scheme and technology of watering plants. In total, 100 bushes of each plant species were used in the experiment. Results and their significance: The use of the obtained organomineral fertilizer allows to increase the yield of vegetable crops (tomatoes, peppers) by 20-25% compared to the control. In addition, in the experimental samples, an increase in the number of fruits on a bush was noted with an increase in their size, a decrease in the growing season and the number of damaged fruits.

The main problem: Modern research in the development of fermented milk products is focused on increasing the bioavailability of milk components, as well as the use of bacterial components of sourdough, which increase health properties. The use of the fermentation process of skimmed milk with a combined starter consisting of traditional for cottage cheese and starter cultures of probiotic cultures immobilized in a gel of biopolymers is very important. Purpose: The purpose of this study is to determine the optimal amount of starter, consisting of an association of probiotic cultures immobilized in a gel of biopolymers (membranes) to be added to fermented skimmed milk in order to enrich it with functional ingredients. Methods: A one-factor experiment was used. The culture association Propionibacterium freudenreichii subsp. was used as a regulatory factor. Shermanii, Bifidobacterium lactis and Streptococcus thermophilus, immobilized in a biopolymer gel, added to skimmed milk in the form of membranes (determined as a percentage of the mass of fermented milk). Controlled factors are the main indicators characterizing the efficiency of the skim milk fermentation process; these are active acidity, the logarithm of the number of viable cells of bifidobacteria, the logarithm of the number of viable cells of propionic acid bacteria, and organoleptic evaluation. Results and their significance: Based on the results of a mathematical analysis of the totality of values of controlled factors depending on the amount of starter cultures of probiotic cultures, mathematical models were built to determine the degree of influence of the starter on the quality indicators of the product, using the Table Curve 3D-v4 mathematical computer program.

In modern conditions, the problem of the incidence of cows with high productivity in the postpartum period is relevant. It is these animals that are more susceptible to various diseases, primarily due to violations of the technology of keeping and feeding, weak body resistance, heavy loads during fruiting and milk production. It is known that as a result of various metabolic disorders, calving of cows in farms proceeds with various deviations. The lack of calcium in the blood due to hormonal disorders leads to hypocalcemia and paresis after calving, which is often the cause of death of animals. Therefore, the improvement of prevention schemes and treatment of puerperal paresis in cows is very relevant. Purpose of the article – Improvement of preventive and therapeutic measures for postpartum paresis in cows on the basis of the Tassu farm in Akmola district. The work was carried out under production conditions on a livestock farm in the Akmola region, in the farm "Tassu" in the spring and summer. The object of the study were black-motley cows with a pregnancy period of 250-260 days. 22 animals were selected in the experimental group, 12 animals in the control group. The average weight of animals is 567 ± 34.5 kg, age 5-6 years. The cows of the experimental group received injections of the drug Karsulen, which included: 2 % Cardus marianus D3, 1 % Sulfur D6 and 1 % Arsenycum album D6. Karsulen was administered to cows intramuscularly or subcutaneously at the rate of 1 ml per 100 kg of animal weight, the dose volume should not be less than 5 ml per animal. In the postpartum period, in the complex therapy of postpartum paresis in cows, Karsulen is used intramuscularly or subcutaneously 1-2 times a day. The use of the drug Karsulen with the composition: 1 % Cardus marianus D3, 1 % Sulfur D6 and 1 % Arsenycum album D6 has a regulatory effect on protein, carbohydrate, fat metabolism, restores impaired function of the gastrointestinal tract, liver and kidneys.

Based on the psychological aspect of the concept of "qualification", the article analyzes the main directions of the formation of methodological qualifications of future teachers of mathematics and advanced training in pedagogical universities. It is possible to achieve high-quality teaching of geometric subjects in higher educational institutions by using methodological and meaningful methods in organizing the educational process. The creation of a certain structure of the educational process, the definition of teaching methods and means, the careful selection of subject content were determined by the specific principles of pedagogy. Basically, these principles are the real achievements of modern pedagogy and are constantly changing. The existing system of didactic principles can be gradually changed and expanded The purpose is to choose the main didactic principles and to offer a scientific-methodological basis for improving the methodological preparation of future mathematics teachers in the Pedagogical University for solving and teaching geometrical problems. In this regard, interviews, questionnaires, analysis of the curriculum and its content, as well as discussions with experienced teachers and methodologists in teaching geometry were conducted; pedagogical control and diagnostics of the educational process were carried out. In order to test the effectiveness of the methods proposed by us, pedagogical experiments were carried out. The entire system of training future teachers of mathematics faces new challenges related to the implementation of effective didactic principles for teaching geometry in pedagogical universities. First of all, it is the principle of mastering innovative teaching methods of the future teacher of mathematics and the principle of mastering new pedagogical and information technologies of education. The results of the study can be used as a methodological basis for further research on the professional orientation of teaching mathematics in universities.

The production of vaccine preparations before release requires standardization of their immunobiological parameters, especially safety and immunogenic efficacy. An indicator of the immunogenic effectiveness of the lumpy skin disease vaccine is the resistance of vaccinated cattle against the virulent virus. However, according to preliminary studies, the virulent control virus did not always cause clinical disease with characteristic symptoms when infected subcutaneously. The purpose is to develop a biological model in the form of a complex consisting of a pathogenic virus, a method of infection and a susceptible animal to assess the immunogenicity of a lumpy skin disease vaccine. Local cattle, intact from lumpy dermatitis, were used to reproduce lumpy dermatitis and develop the causative agent of the disease. As the initial infectious virus, we used a 20 % tissue suspension of nodules (skin nodules) obtained from cattle that fell ill with lumpy dermatitis in the field in the Atyrau region in 2016. As a viral mass to control immunogenicity, a 20 % suspension of skin nodules and edematous skin tissue at the site of the pathogen injection, obtained after the “refreshment” of the virus in animals, were used. The disease was reproduced by infection with the test suspension of the virus intradermally, subcutaneously, intravenously at a dose of 0.5 cm3 and titration on the skin of the animal. The effectiveness of the biological model was assessed by morbidity, severity of the course and severity of the manifestation of the disease. During primary intradermal infection with a field isolate of the virus, the disease manifested itself in one of three animals in the form of hyperthermia, depression, lacrimation, and the appearance of several nodular nodules in the skin of animals. The refreshed tissue virus caused clinical disease both in subcutaneous, intradermal and intravenous infection. But the clinical signs of the disease were more pronounced with intradermal inoculation of the virus, and with intravenous inoculation, it manifested itself in a more severe form with a fatal outcome. Inoculation of the virus intradermally into different areas of the skin led to the development of an independent skin lesion in each infected point in the form of painful edema, followed by necrosis, the size and intensity of which depended on the dose of the injected virus. This development of skin pathology made it possible to work out a method for determining the virus titer in vivo. The tissue virus obtained from the edematous tissue at the site of the pathogen injection was guaranteed to cause clinical disease in cattle during intradermal inoculation and made it possible to evaluate the immunogenic efficacy of the produced batches of vaccine against lumpy dermatitis.

The degree of dаmаge to deer by the lаrvаe of Oedemаgenа tаrаndi of the Hypodermаtidаe fаmily depends on the number of femаles of the subcutаneous gаdfly in the summer. For the development of meаsures to combаt deer gаdflies, vаrious methods hаve been tested over the yeаrs, аmong them methods of wаtering аnd externаl locаl аpplicаtion. For this purpose, mаny reseаrchers tested dipterex (80 %), crystаlline chlorophos (97 %) in the form of аn 8 % solution, tiguvon, ricifon, dioxаfos, sulfidophos-20 аnd ectopor (2 % cypermethrin) аnd other drugs. Vаrbeks 35 %, Bаytex-50, Fenthion-50, Nаtаsol аnd Etаcid, etc. were tested intrаmusculаrly in vаrious doses on deer. The purpose is to study the prevаlence аnd effectiveness of the treаtment of edemаgenosis in sikа deer in the Ussuriysk urbаn district. The reseаrch wаs cаrried out аt the deer fаrm "Borisovskаyа". For the experiment, three groups of deer were formed with 6 heаds eаch. In order to study the therаpeutic аnd prophylаctic efficаcy of the two groups of drugs Аversect-2 аnd Dectomаx, the аnimаls of the first experimentаl group were injected with the drug Аversect-2 subcutаneously аt the rаte of 1 ml per 50 kg of аnimаl weight, deer of the second experimentаl group were injected subcutаneously with Dectomаx аt а dose of 0.2 mg per 1 kg of mаss, which corresponds to 1 ml of solution per 50 kg of mаss. The prepаrаtions were аdministered immediаtely аfter the end of the summer of gаdflies (end of July-beginning of Аugust). The third group of deer did not receive drugs, аnd it remаined the control group. The incidence of sikа deer entomosis in the Ussuriysk urbаn district for three yeаrs wаs quite high аnd remаined аt the sаme level for аlmost the entire period (43.21-48.8), with а slight decreаse in 2021 to 37.4 %, which wаs most likely due to the climаtic conditions of this period. Of the two selected drugs with seemingly the sаme spectrum of аction, the best results were obtаined on the deer of the second experimentаl group, where the drug "Dektomаx" wаs used, while the EI wаs significаntly (two times) lower thаn in the first experimentаl group аnd аmounted to 16.7 % versus 33. 3 %, аnd АI - 0.03, аgаinst 0.83.

Significant air and water pollution, which is detrimental to the health of the citizens of Kazakhstan. Courts and regulatory authorities do not properly fulfill their obligations in the framework of environmental protection. Currently, government agencies are pursuing a policy aimed at protecting the environment and the rights of citizens. Purpose of the study is to analyze international models, practices, application of management systems for the legal protection of the environment and the health of citizens with application in Kazakhstan. The article discusses and explores a number of principles and methods of environmental management. Since these principles and practices contribute to the establishment of rational and effective environmental policy and management, it is proposed to take them into account when rethinking the current system in Kazakhstan. The article analyzes models and methods of legal protection of the environment and response to damage to the health of citizens, these tools can be part of an integrated system. Based on the study, it was found that in order for environmental management to reach its full potential, Kazakhstan also needs to undertake political reforms and involve ordinary citizens in the formation of policies and protection mechanisms. The studied strategies for collecting and taking into account the opinions of people when making managerial decisions on environmental protection can be used in Kazakhstani society.

In order to successfully conduct agricultural work and obtain a competitive harvest, it is mandatory to carry out spraying operations of crops that require highly qualified personnel, expensive equipment and suitable weather conditions. The use of tractors for spraying fields is the most common solution available at the moment, has disadvantages: high cost, risk of damage to the crop by "hitting", "hooking" or otherwise; environmental damage; due to exhaust gases, the demolition of the solution increases with increasing speed. Using a device designed specifically for spraying equipment is an ideal solution. The purpose of the article is to develop a working model of an automated sprayer for processing agricultural crops. The methods used are: technical justification of a controlled device for processing agricultural crops. Calculation of functional capabilities, algorithms of operation of the proposed automated device: selection of the type of sprayer, engine, chassis, controller, battery, as well as justification of the possibilities of using alternative energy sources (wind energy, solar energy); development of a 3D model of an automation device for anti-weed processing of agricultural crops, printing of parts, assembly of mechanical and electronic parts. Making a prototype using 3D printing; development of the wiring diagram of electronics, software (firmware of the microcontroller; application that controls the settings), testing of the prototype, assembly of the current model; rationale for the optimal use of Arduino and Raspberry Pi boards in this device in a pair: Raspberry Pi will allow you to control processes on the Arduino and easily interact with the Internet when the Arduino itself will perform simple operations such as interacting with electronics and reading sensor readings. The manufactured operating model showed compliance with the goals, a high degree of controllability, environmental friendliness, reduction of energy consumed, labor resources and can be used to scale this device. The developed model of the automation device for anti-weed treatment of agricultural crops can be used not only in agricultural pollination, but also as a mechanism for studying soil parameters: humidity, mineralogical composition and chemical content in the ground, using electronic sensors, as well as an automated mobile platform for any purpose requiring accurate navigation through the territory.

Main problem: the article is devoted to the issue of designing basic recipes for dairy products using mathematical modeling methods. The author analyzed the problems in the field of food technology and concluded that mathematical modeling is used in the following areas: clarification of technological process modes, designing recipes and assessing the quality of finished products, as well as predicting the shelf life of new products when they are put into production. The use of dihydroquercetin as a drug that prevents the oxidation of milk fat in the design of dairy products is substantiated. Mathematical modeling was carried out on the basis of experimental and analytical material obtained in laboratory and production conditions. Based on the maximum value of the objective functions, the optimal normalized mixtures and the maximum allowable concentration of dihydroquercetin were selected. The analysis of the received mathematical dependences and models is carried out, the system of linear equations is made. Purpose: to study the effect of natural bioflavonoid antioxidant on the oxidative processes of milk fat and the viability of lactic acid cultures and their associations by mathematical modeling in order to use it in the technology of a new product; conduct an analysis of mathematical dependencies and models, compose a system of linear equations. Methods: the article uses the method of mathematical analysis and the matrix method. Results and their significance: a mathematical model was developed for the dependence of the viability of probiotic cultures on the mass fraction of dihydroquercetin when designing recipes for a creamy-protein curd product, a matrix of the chemical composition of dairy ingredients was presented, and a system of linear equations for basic recipes was compiled. In the course of the study, the spatial configurations of dihydroquercetin, as well as its effect on the oxidative processes of milk fat, were studied. Mathematical modeling of experimental data on the study of the effect of dihydroquercetin on the viability of microorganisms with probiotic properties was carried out. The normalization of the complex of obtained results on the study of the influence of the mass fraction of dihydroquercetin on the fermentation process was studied. Controlled factors characterizing the process of fermentation of model media with dihydroquercetin have been determined. A rationing of the dihydroquercetin complex of more than 0.50% was established; the target function decreases to its minimum value of 0.53 with a mass fraction of dihydroquercetin of 1.00%.

The present stage of development of power systems is characterized by the need to increase their intelligence, that is, the formation of an environment capable of solving the problems of effective management of all components included in the power system. One of the features of modern energy systems is an active consumer, that is, a consumer who has the opportunity to optimize the schedule of loading their capacities, planning energy consumption, intellectualization of energy consumption. In addition to the fact that there are digital systems for collecting, processing and presenting information, as well as transmitting this information via the Internet, to solve the most difficult task of managing power systems, it is necessary to develop a large number of models adequate to real processes that can describe the processes taking place in the power system under consideration. The purpose is to develop models capable of adequately describing the interrelated processes occurring in the considered elements of the power system, as well as in the aggregate of related elements; development of methods that allow solving problems of effective control of elements of energy systems on the basis of the proposed intelligent models. To solve the problem of increasing the intelligence of the power system, nonlinear adaptive models of electrical complexes of an energy-intensive enterprise included in the power system were developed on the basis of balance equations and artificial intelligence methods. The production of alumina with the properties of inertia, nonlinearity and closure is chosen as the production under consideration. This type of production was chosen as the most difficult to predict due to the unpredictability of changes in energy consumption during the transition to other modes of its operation, associated, for example, with the receipt of raw materials with a different chemical composition for processing. Static and dynamic models of energy consumption of electrotechnical complexes with continuous inertial nonlinear closed production based on artificial intelligence methods have been developed, which makes it possible to eliminate the need to use long time series of retrospective data. For the considered type of continuous energy-intensive production, dynamic characteristics of energy consumption and technological processes are obtained from the main controlled parameters, which make it possible to predict emergency situations and partly man-made disasters. On the basis of a genetic algorithm, a multiparametric optimization problem of energy management of continuous production has been solved, taking into account technological parameters and cost factors.

The article discusses the experience of developing a computer video game by a team of students of the Department of Information Technology of the Innovative University of Eurasia within the 48-hour competition «48h Game Making Challenge» for creating video games, held in Pavlodar on October 27-29, 2022 in the IT-Hub building of the College of Information Technologies (93 Lermontov St.). Basic information about the event and a link to the registration form were published on the Instagram @digital_drive14 social network page and on the website https://digitaldrive.kz /. 8 teams from different educational institutions of Pavlodar participated in the competition. The purpose of the article is to comprehend the practical experience of developing a computer game. The team chose the Unity game engine as the environment and the main tool for developing a computer game. The Unity program is a popular development environment for interactive 2D and 3D content. The engine is completely free for the average user. The Unity engine was also chosen because it is multifunctional and uses a component-oriented approach, in which the developer creates objects and adds various components to them. The advantage of the engine was also the presence of a huge library of assets and plugins, with which you can significantly speed up the game development process. The graphics of the game were made in Photoshop. The music and sounds were taken from free sources. InEU team developed a computer game «Conqueror of the Moon» and became the winner of the contest «48 Hour Game Making Challenge Pavlodar 2022». During the development of the game, the team first chose the engine, developed the plot and concept of the game, created an image for the level and menu. Then the programmer developed the mechanics of the game, wrote code for control, time, dialogues, messages. The designers drew the environment, background, characters, created all the animations for the game and found music for the background of the menu and the game itself.

The article contains the results of a research work devoted to an important problem - the development, production and delivery to the consumer of fermented dairy products of a healthy diet fortified (enriched) with milk protein, a vitamin-mineral complex, and probiotics and prebiotics. Purpose is based on mathematical modeling of experimental data, to determine an effective fermented food system for use as the basis of a fortified (enriched) curd product for a healthy specialized diet; to develop a recipe and technology for its production; to study the nutritional, biological and energy value of a new product. Modern technologies and equipment were used in experimental studies: ultrafiltration, fortification, etc. The studies were carried out by standard physicochemical, microbiological methods in three to five repetitions. Mathematical and statistical processing of experimental data was carried out using the program "Statistica-6.0". A recipe and technology for the production of a curd product for a healthy specialized diet has been developed. Its nutritional, biological and energy value has been studied. The developed recipe and biotechnological parameters for the production of the curd product were tested in the industrial conditions of the leading enterprise JSC "Lyubinskiy MKK". The quality and safety of the curd product was studied in the laboratory of techno-chemical control of FGANU "VNIMI" (Moscow).

Main problem: in Kazakhstan, the Government is reviewing its environmental and health management system to identify opportunities for improvement. Kazakhstan suffers from a high level of emissions into the environment and related health problems of the population. The link between environmental pollution and public health has been established for a long time. In Kazakhstan, air pollution, water pollution and soil and groundwater pollution are the main causes of widespread health problems and diseases, including, but not limited to, lung diseases and certain cancers. Recognizing these problems, the Kazakh Government is trying to strengthen environmental protection and environmental management system. Purpose: the purpose of the study was to analyze international models, practices, application of management systems for the legal protection of the environment and the health of citizens with application in Kazakhstan. Methods: the article discusses and explores a number of principles and methods of environmental management. Since these principles and practices contribute to the establishment of rational and effective environmental policy and management, it is proposed to take them into account when rethinking the current system in Kazakhstan. The article analyzes models and methods of legal protection of the environment and response to damage to the health of citizens, these tools can be part of an integrated system. Results and their significance: based on the study, it was found that in order for environmental management to reach its full potential, Kazakhstan also needs to undertake political reforms and involve ordinary citizens in the formation of policies and protection mechanisms. The studied strategies for collecting and taking into account the opinions of people when making managerial decisions on environmental protection can be used in Kazakhstani society.

Main problem: For several years, the state has been trying to reduce bureaucratic processes with entrepreneurs, make accounting transparent, reliable and with less labor costs. At the moment, without digitalization in accounting, it is impossible to predict the further development of trade and economic relations in general, since it significantly affects the sale, movement and shipment of goods. The gradual transition of the economy of the Republic of Kazakhstan to the path of digitalization can be considered the most important condition for the development of both the country’s economy and the Eurasian Economic Union. Digital inspection is the process of monitoring goods using digital systems, which helps reduce the risk of human error. In the context of digitalization, work with documentation should be structured in such a way that access to them is ensured throughout the entire limitation period, thereby facilitating the taxpayer in making the right economic decisions. The purpose of this article is to consider the gradual integration of digitalization into the field of accounting for both small and medium-sized businesses, and also to consider its impact on the business processes of organizations. The main objective of the article is to consider the introduction of digitalization into business processes and possible problems during its integration, as well as to identify ways to eliminate them without losses for both the state and small and medium-sized businesses. Methods: In the course of writing this article, a dialectical approach was mainly used, which made it possible to examine in detail the process of reflecting and controlling document flow when moving goods in the context of digitalization. Approaching the issue theoretically and summarizing practical experience, it was possible to identify the positive and negative aspects of accounting and control of the movement of goods on the territory of the Republic of Kazakhstan and beyond its borders in the conditions of rapidly developing digitalization. Results and their significance: This article reflects the main directions of modernization of accounting and operational accounting in Kazakhstan in the context of the progressive digitalization of the economy. The necessity of creating an information environment for managing economic processes and optimizing the operational activities of an enterprise is substantiated, and the positive and negative aspects of the integration of various information systems and modules for maintaining accounting and operational records at an enterprise are considered

Main problem: Monitoring the reliability of the foundation of roads, buildings and engineering structures is an important aspect of geophysical research. Modeling of geological heterogeneities is relevant. Moreover, the use of computer modeling in this problem is associated with computational costs. Purpose: Analysis of the vertical electrical sounding (VES) method for modeling the physical properties of soil and their changes when exposed to elastic vibrations. Methods: To achieve the goal, the vertical electrical sounding (VES) method was used, using a one-dimensional model of the geological environment. The direct VES problem was solved by calculating the Hankel integral. Results and their significance: The study made it possible to model a large number of soil layers using the VES method. The results obtained make it possible to determine the parameters of detected objects and changes in the characteristics of the controlled environment when exposed to elastic vibrations. The significance of the results lies in the possibility of improving the method for modeling the physical properties of soil and taking into account their changes under the influence of elastic vibrations, which helps to increase the efficiency and accuracy of monitoring the reliability of the foundation.

The development, grovth and productivity of livestock depend primarily on providing it with a variety of nutritious feeds. Daily feeds should consist of microbiologically synthesized protein, as well as a variety of seeds, mineral and vitamin supplements of animal and vegetable origin. Indeed, the maximum disclosure of the genetic potential of livestock largely depends on both the quantity and quality of feed. One of the stages of feed quality assessment is the measurement of their chemical composition. The chemical composition is not always constant and depends on many factors, including the species composition of plants, fertilizer application rates, climatic conditions and storage methods. The least accumulation of moisture in the soil was observed in areas where pasture grasses were regularly treated with wormwood. Pacture productivity was also the lowest in the control plots, where the average phyto-chemical composition over three years showed that the dynamics of protein content was the same in all pastures – the protein content reached a maximum at the beginning of the growing sea son and decreased from spring to autumn, while the lowest content of crude protein during harvesting in summer was in control plants of varieties

Main problem: At the present stage of life, workforce plays a special and very important role in the activities and development of any organization. Human resources need to be managed. Management itself is a process of streamlining, regulating a particular activity. Managing an organization means defining the main directions of its development, setting goals for it and contributing to their achievement. Human resources are the face of a company, a component derivative, without which its existence is impossible. Any promising and self-respecting company assigns the formation of its staff to one of the leading directions of its own policy. Currently, in the context of social and economic transformations, the management of the activities of healthcare organizations is changing significantly, and therefore it is necessary to improve personnel management approaches that contribute to improving the quality of services provided and labor productivity. Taking into account the peculiarities of personnel management of a medical institution at the present time, the issue of reforming the personnel policy of healthcare, improving the image of institutions, forming a corporate culture, developing and implementing criteria for the motivational process is acute. Solving these tasks will help managers in the personnel management process. Purpose of this article is to assess the state of human resources of organizations of the sanitary and epidemiological service in the Republic of Kazakhstan and identify the main problems in the personnel management system of the organization using the example of the activities of the State Institution “Committee for Sanitary and Epidemiological Control of the Ministry of Health of the Republic of Kazakhstan”. Methods: The work used general scientific methods of comparative systemic, vertical and horizontal analysis, structural and functional the method, analytical techniques, economic and statistical research methods. Results and their significance: the authors have defined the human resource management system of a healthcare institution, analyzed the current personnel management system using the example of the State Institution “Committee for Sanitary and Epidemiological Control of the Ministry of Health of the Republic of Kazakhstan”. The assessment of the state and movement of labor resources of the Sanitary and Epidemiological Control Committee was carried out. Based on the conducted research, the authors identified the main problems of human resource management of a healthcare institution and developed proposals that can be used as recommendations for further reform and development of the personnel management system in the healthcare sector.

The article provides a comparative legal analysis of the constitutional statuses of the Presidents of the Republic of Kazakhstan (ROK) and the United States. The study was conducted according to the relevant provisions of the Constitution of the studied countries and according to the criteria: form of placement; form of government; presidential elections and powers; censorship established for presidential candidates, etc. The peculiarities of the legal status of the institution of the presidency of these countries were noted, including the following issues: participation in the formation of the upper house of the Parliament, ministries and other government bodies; interaction with the Parliament and judicial branches of the Government; powers in the field of defense and security; international relations; lawmaking, etc. Purpose: to reveal the content of the legal status of the President of the Republic of Kazakhstan, to reveal the doctrinal, specific, normative legal status of the head of state, to analyze the features of the President of the Republic of Kazakhstan, his normative and actual status. The article evaluates the constitutional and legal status of the President of Kazakhstan in relation to the administrative and legal status, analyzes the status positions of the ‘President’ as the head of the state and the highest official performing the functions of public administration in the context of constitutional foundations. Methodology: the methodological basis of the research as well as the work is based on a set of scientific methods of phenomena cognition: comparative Jurisprudence, the method of dogmatic analysis of legal acts, etc., which made it possible to identify the problems of the constitutional and legal status of the President of the Republic of Kazakhstan, to establish the fact of combining elements of the super-presidential form of the government. The results and their significance: therefore, based on the results of a comparison between the presidential institutions of the United States and Kazakhstan, the right to address the Parliament, the participation of the Senate in the appointment, approval, election of officials proposed by the President, the right of veto, the General Command of the Armed Forces, one person cannot be a president for more than two consecutive terms.