Annotation: Fruits and vegetables are most often consumed without being thoroughly processed before consumption. Some plant foods are vacuum-packed to ensure long shelf life as well as preserving the quality and safety of the product. Fruits and vegetables carry naturally occurring non-pathogenic epiphytic microflora on their surfaces. During growth, harvesting, transport and further handling they can be repeatedly contaminated by pathogens from human or animal sources. Fresh fruit crops have been implicated in a number of documented foodborne disease outbreaks. Outbreaks of diseases caused by bacteria, viruses and parasites have been epidemiologically linked to the consumption of a wide range of fruits and vegetables. The aim of our study is to assess the risk of contamination in fruit and berry crops and how to address this long-standing problem, namely, contamination of fruit and vegetables with unnatural pathogenic microflora. The following fruit and berry crops common in Turkestan region were chosen for the experiment: Apple variety Suislepskoe (stolovka) , peach variety Nectarine and grape variety Kishmish. Bacteriological inoculation was carried out by membrane filtration of used sterile water to obtain flushes from the surface of fruit crops. All work was carried out under full aseptic conditions. The utensils, water and other equipment used in the work were sterilised in advance. The data obtained during the experiment shows that there is a potential for widespread contamination of uncharacteristic microflora of plant products. Based on the results of the study it can be concluded that there are yeasts and acetic acid bacteria on the surface of all three samples of fruit and berry crops, which can be universally contaminated food and are not the natural microflora for the above mentioned crops. Specifically, fruits and vegetables can be contaminated with various bacterial pathogens, including Salmonella, Shigella, E. Coli O157:H7, Listeria monocytogenes and Campylobacter.

Annotation: The sharp deterioration of the environmental situation in the Republic of Kazakhstan, associated with human activity and the impact of harmful factors on the environment, affected the quality of food consumed by insufficient consumption of domestic fruit and vegetable products containing vitamins, minerals of an alkaline nature, carbohydrates, vegetable proteins, pectin substances and active fiber. The problem of improving the quality of growing and processing fruits and vegetables is one of the main tasks of the food independence of the Republic of Kazakhstan. Currently, the share of large vegetable farms in the Republic of Kazakhstan is only 10%. The volume of industrial processing of fruit and vegetable crops in Kazakhstan is insignificant. The demand for domestic fruit and vegetable products in the country is met only by 35-40%, most of it is imported from countries such as Russia, Kyrgyzstan, Uzbekistan and China. There is a need for the development of organic vegetable growing in Kazakhstan and the creation of new types of domestic fruit and vegetable products containing a sufficient amount of useful and active substances that can bind and remove toxic substances and radioactive elements from the human body. The purpose of the work is to improve the technology of fruit and vegetable semi-finished products with natural spicy and aromatic additives, to develop a multi-component recipe for vegetable mixtures and a method for producing quick-frozen vegetable mixtures with high quality indicators. These studies were aimed at studying the chemical composition and functional and technological properties of vegetables and spicy - aromatic plants for the content of biogenic compounds: carbohydrates, proteins, vitamins, essential oils, minerals and other substances. The structure of plant tissues was studied and the mass fraction of moisture, dry matter, fiber, mono - and disaccharides, pectin substances, vitamin C was determined, the formulation and production technology of Assorted vegetable mixtures were developed, and quality indicators were determined.

Annotation: The Kazakhstani manufacturer has repeatedly faced situations when pseudo-enterprises, disguising themselves as domestic producers of goods, works and services, received preferences and used government support measures, won government and other purchases, while not having enough equipment for production. The article is devoted to current problems and prospects for the application of the Industrial Certificate in the Republic of Kazakhstan. The dynamics of the development of the sphere of public procurement of the Republic of Kazakhstan is considered, depending on the specific requirements for certain areas of production of goods, works and services. The material in this article is important from the point of view of ensuring fair competition between competing enterprises in the same industry. The complex of transformations in the system of standardization, certification and quality management has been carried out since the first years of independence of the Republic of Kazakhstan. These transformations have been observed over the years, vivid examples of which are: the application of the European model of technical regulation to the modern realities of the economic situation in the Republic of Kazakhstan, accession to the Customs Union, the adoption of unified technical regulations of the Customs Union, the introduction of new regulations and legal acts defining the share of local content in products and services, as well as the potential of domestic industries. The results of these transformations have proved that the system of technical regulation of the Republic of Kazakhstan is an effective tool for the development of the economy. The development of new Kazakhstani normative legal acts and normative documents introduced to support the domestic producer of goods and services will contribute to the transformation of the old system and the creation of a new one that is fundamentally different from the previous one. The article discusses problematic issues in the field of industrial certification, namely: a lack of qualified personnel; unregulated pricing system for work carried out in this area; the complexity of the industrial certification procedure; a lack of automation of processes of the industrial certification mechanism. Analyzing the practice of industrial certification, this article offers recommendations for solving the above problematic issues. New edition of amendments and additions to the «Rules for the formation and maintenance of the register of domestic manufacturers of goods, works and services, as well as the issuance of an Industrial certificate» approved by the decision of the Presidium of the National Chamber of Entrepreneurs of the Republic of Kazakhstan «Atameken» dated 28.12.2018. No. 28 is designed to reconstruct the process of obtaining the Industrial Certificate. The process should become more transparent, understandable and highly efficient. Also, with the introduction of changes, the problems that hindered the receipt of the Industrial certificate by individual enterprises should be resolved.

Annotation: In the conditions of modern economy, factors that affect the security of the business, but relate to external resources in relation to the company or opportunities, become significant. These resources and opportunities in economics have traditionally been identified with macro-economic (economic growth, inflation, exchange rates, government support) and institutional parameters (regulatory framework, transaction costs). The influence of the quality of economic space on economic security of business through the evaluation of opportunities that are tied to the specifics of the economic space is the least researched, including in our country. In this case, according to the latest research in the field of economic geography, economic space acts as a structure-forming platform that can form local markets, with intensive interaction of business agents. The purpose of this study is ensuring of economic security by building business networks in a single economic space. The research area focuses on indicators that characterize economic space, which are successfully used in international practice to determine the quality of economic space. The realization of this approach requires the use of traditional methods of scientific research, such as analysis, comparison, graphical method for visualizing obtained results, which allows determining the agglomeration zone and the space of business networks in it. When considering economic space in relation to building a business network in improving business security, main focus is on the quality of economic space that the region has. The proposed methods of evaluating the quality of economic space are actively used to determine the possibility of building business networks in this space. The authors conclude that business networks play a crucial role in improving the economic security of business in a particular economic space. The set of proposed measures provides additional opportunities and increases the influence of economic space on business security and creates the zone of maximum external security

Annotation: Main problem: In the 18th century, when industrial production began, the use of steam and mechanized production caused major changes in the economy. As a result, production costs decreased along with an increase in the quantity and quality of products. During this period, production underwent a revolutionary transition from manual labor to mechanization. The potential impact of Industry 4.0 on labor markets remains an under-explored scientific field. It is estimated that Industry 4.0 will lead to unemployment by changing the employment structure and will bring new structural problems in terms of unemployment and labor relations. Purpose: The purpose of the study was to establish the impact of Industry 4.0 on the labor market and identify the consequences of the impact. Methods: studied, the evolution of production development, when mass production with electricity led to the Age of Industry 2.0, and then the emergence of the digital revolution, the use of electronics and information technology in production processes, marked the beginning of the Age of Industry 3.0. It is expected, according to international experts, scientists, that automation and robotic production will have a serious impact on the unskilled workforce and cause a critical reduction in the labor force of vulnerable sectors of society, that is, women, migrants, youth and the elderly. Results and their significance: This study assessed the possible impact of the fourth industrial revolution on labor markets. Through a literature review and analysis of emerging trends in Industry 4.0, the risks, opportunities and challenges of the process are explored in a comparative perspective. It has been established that countries must correctly perceive the transformation of labor markets and take appropriate measures. Otherwise, the applied labor-based low-cost industrialization model will lose its comparative advantage

Annotation: This article reveals the essence of teaching the disciplines of the natural science cycle in English in high school. When preparing for the lesson, there is a need for careful selection of educational material, the teacher thinks out a specific algorithm for working with the text in a foreign language using subject terminology, while not forgetting the basic grammatical and syntactic models characteristic of the English language. In such a language environment, foreign speakers actively acquire solid knowledge, eliminating language difficulties in professionally-oriented lessons. Given this problem, we decided to create a methodological guide for teachers, which will contain tasks for formative assessment in physics lessons in English. Its lexical and grammatical material meets the requirements for mastering the English language (B1) in educational and cognitive activities. The presented progress tests also meet all the requirements of the corresponding stage of training of non-native speakers and help to consolidate the skills of professionally oriented communication. The purpose is to reveal some principles that should be taken into account when preparing assignments for physics lessons in English, as well as to provide a methodological guide for teachers. This article shows several principles that are most effective when conducting lessons. All the data of the article was confirmed by a computer survey of students, the answers were analyzed and collected for publication. Given the results we have presented, secondary school teachers can improve the quality of the material provided, as well as spend less time preparing for lessons. Physics is one of the fundamental sciences that can combine both the subject content and the language component. Here we present various methods of subject-language integration to improve communication skills. Thus, the preparation and conduct of physics lessons in English requires a strict and careful selection of educational material and takes into account the educational profile of secondary school students.

Annotation: Main problem: this article deals with the research of surrealism which is not just one of ordinal modernism directions or one of many isms in the art of the 20th century, but which appears as a universal phenomenon in the culture of the epoch, reflecting its main features; surrealism has risen many issues substantive for culture modernity, and resolutions of which are worthy in-depth study. Purpose: to determine the meaning of the unconscious when building a surrealistic world picture and show the relationship and interinfluence of the arts and reality, real and imaginary within the frames defined by surrealism. Methods: the study is based on philosophical and art review of literary and art works performed by surrealists. In various manifestos and works made by surrealism figures it is traced the intention to penetrate into the depth of human psycho using dreams and different mental illnesses. It is known about the enormous impact that the discoveries made in the field of psychoanalysis had on the development of Surrealist philosophy. So, the method of free associations was popular, which was actively used by the Austrian scientist Z. Freud in his medical practice, talking with the patient and analyzing his dreams, the doctor with the help of key symbols revealed the cause of the neurosis, and the surrealists were attracted by the research of the Swiss psychiatrist C. Jung, devoted to the analysis of archetypes and symbols in the lives of various peoples. Results and their importance: practical significance of the study is related to the following circumstances: the necessity to make sense for the reasons of the crisis which encompasses the culture today, the search of possibilities and ways to recover it; u this work’s materials can be also used in research of creations of young Kazakhstan avant-garde artists. The research materials can also be used in the practice of teaching philosophy, cultural science, psychology, and other humanitarian disciplines and also in work of fine art experts and museum staff; based on the materials of this research, the special courses on culture philosophy, culturology, esthetics and theory of arts can be developed.

Annotation: The main task of microbiological study of pulmonary patients is to identify the etiology of acute and exacerbation of chronic disease in order to determine therapy and control its effectiveness. Classical methods of microbiological research consist in isolating a pure culture of the causative agent of the disease with its identification by biochemical, antigenic and other characteristics. Such studies are multistage; they impose rather strict requirements on the quality of the source material, the timing and conditions of its transportation, laboratory equipment and the precise execution of the research methodology for at least 3-5 days. Isolation of the culture of a number of pathogens (atypical intracellular microflora, anaerobic bacteria, mycobacterium tuberculosis) requires even more lengthy studies using special media and equipment. This article presents the results of a bacteriological study of pathogenic microflora in diseases of the respiratory system of the population of the Shcherbakty district of Pavlodar region for 2017-2019, including the following sequence: microscopy of native and Gram stained smears; inoculation of biological material on nutrient media for isolation and identification of the pathogen; determination of the sensitivity of the isolated microorganism to antibiotics; immunological (serological) research methods aimed at determining antigens of microbiological origin, as well as antibodies to them in the patient's body. It has been shown that conducting bacteriological studies in accordance with the requirements of regulatory documents allows obtaining reliable and comparable results necessary both for the optimal treatment of patients and for collecting and analyzing data on monitoring the emergence and spread of diseases of the respiratory system caused by pathogenic microflora.

Annotation: Main problem: Technogenic "metamorphosis" of vegetation near such large industrial facilities as Pavlodar is considered to be the result of various active chemical and mechanical factors provoked by economic activities associated with the influence of emissions from industrial companies. The effect of anthropogenic impacts on vegetation in all regions of Kazakhstan varies and is largely dependent on the economic development of the territory, but in any case, the end result of this impact is the change in the vegetation, causing violations of with structure, reduced vodorazdelnaya flora and productivity of communities. This, in turn, can cause infection of herbaceous plants with pathogenic fungi, which then carry with them: a decrease in the intensity of plant growth, a deterioration in their decorative qualities, a decrease in the survival of the biological species. Purpose: to study the types of fungi-pathogens of phytopathogenic diseases and to determine the degree of modification of the plant component, which is under intense negative technogenic influence from the Aksu Ferroalloy Plant (AFР). Мethods: For the experimental study, species of plants such as: Artemisia dracunculus L; Artemesia vulgaris L; Atriplex fera L; Atriplex patula L; Artemisia annua L were selected for the content of fungipathogens of phytopathogenic diseases. Results and their significance: This experimental study was aimed at the presence of fungi-pathogens of herbaceous plants as a result of human impact, occurring near the industrial zone "AFР". The composition of fungi-pathogens of herbaceous plants collected in this industrial zone was considered and studied. According to the results of an experimental laboratory study, phytopathogenic fungi of herbaceous plants belonging to 1 ordo, 1 familia, and 4 species were found.

Annotation: Today, there is a full development of the food industry. It is characterized by the widest mechanization and automation of production and transport processes, the use of artificial cold and vacuum technology, the latest physical methods, chemical and biological preparations to accelerate technological processes. There are a huge variety of new products. New ways of long-term preservation of products in hermetic airtight packaging are promising. Now it is possible to deliver products from almost any industry to anywhere in the world. But the main problem for the modern consumer is that today's food industry is moving by leaps and bounds in the application and addition of chemical food additives: preservatives, flavors, dyes, stabilizers, antioxidants and substitutes for raw materials. To correctly answer the question of how to treat the use of food with food additives, it is necessary to understand and weigh the main disadvantages and advantages of using them. Advantages are that the product is better preserved, has an attractive appearance. Disadvantages are that the human body wears out, processing various chemicals, it is harmful to health. And with certain doses of use it becomes dangerous. Everyone has their own attitude to their health and their own priorities in life. Many people have come to terms with the daily use of products with additives, but others consciously refuse almost everything in the store. But the fact that no one wants to be poisoned from an overdose of various chemicals or starve to death. Therefore, the main advice is to carefully study the composition indicated on the label of food products and know the measure of their consumption. It is also impossible to believe blindly that the label was written with the truth. Manufacturers often use additives literally visually, which can lead to the production of a product with a dangerously higher concentration. It also happens that the manufacturer intentionally exceeds the norm in order to hide the shortcomings of the product (stale, poor quality of raw materials) and increase the yield of the finished product. The food additives added to many foods (usually designated by the code E) are predominantly harmful to the body. With moderate consumption, the use of products with E-supplements is not too harmful to the body (for example, several times a month). The situation is dangerous when a person consumes products with a large number of food additives daily or even several times a day when using various products. Nowadays, there are several hundred food additives with the code E (from E100 to E1521).