Annotation: In the dairy market of Kazakhstan, the demand for mass-produced dairy products is decreasing and expanding to innovative fermented milk products for functional nutrition. The main feature of the new technology is multicomponent formulations, which include the main raw materials and biocorrectors, ensuring their high biological and nutritional value. New dessert products are prepared on a dairy or protein basis using vegetable ingredients, fermented with strains of dry starter cultures of direct application or immobilized starter culture Bifimm probio. The purpose is to apply immobilized living cells of pure cultures of lacto- and bifidobacteria as a biocatalyst for the fermentation of dairy-vegetable media. During the study, the method of immobilization of microbial cells in biopolymer gels was used. The most effective method is the inclusion of cells in an aqueous solution of biopolymers with a concentration of 25 %. For immobilization, pure cultures of lactic acid and bifidobacteria were selected in the gel as part of the concentrates "BK-Altai-LS Bifi", "Poleznaya Partiya", "Genesis", "Narine", "Bio-yogurt Vivo", and the main prescription ingredients were selected: milk with a mass fraction of fat of 1 %, 2.5 %, 3.2 %, natural grain additives, jams, juices, nuts. Formulations, technological schemes and production methods, prototypes were developed, quality and safety indicators were determined. Studies have shown the effectiveness of immobilized starter cultures in the formation of fermented dessert products. Out of 20 prototypes with the best indicators, 5 samples were selected, in which the optimal ratio of milk, probio Bifimm starter cultures and biocorrectors averaged 70:20:10. The quality and safety analysis showed that new fermented milk products using immobilized starter cultures have a positive effect of more than -70 % compared to direct-use starter cultures, have functional properties and can be used for healthy nutrition in Kazakhstan.

Annotation: Main problem: the article is devoted to the issue of designing basic recipes for dairy products using mathematical modeling methods. The author analyzed the problems in the field of food technology and concluded that mathematical modeling is used in the following areas: clarification of technological process modes, designing recipes and assessing the quality of finished products, as well as predicting the shelf life of new products when they are put into production. The use of dihydroquercetin as a drug that prevents the oxidation of milk fat in the design of dairy products is substantiated. Mathematical modeling was carried out on the basis of experimental and analytical material obtained in laboratory and production conditions. Based on the maximum value of the objective functions, the optimal normalized mixtures and the maximum allowable concentration of dihydroquercetin were selected. The analysis of the received mathematical dependences and models is carried out, the system of linear equations is made. Purpose: to study the effect of natural bioflavonoid antioxidant on the oxidative processes of milk fat and the viability of lactic acid cultures and their associations by mathematical modeling in order to use it in the technology of a new product; conduct an analysis of mathematical dependencies and models, compose a system of linear equations. Methods: the article uses the method of mathematical analysis and the matrix method. Results and their significance: a mathematical model was developed for the dependence of the viability of probiotic cultures on the mass fraction of dihydroquercetin when designing recipes for a creamy-protein curd product, a matrix of the chemical composition of dairy ingredients was presented, and a system of linear equations for basic recipes was compiled. In the course of the study, the spatial configurations of dihydroquercetin, as well as its effect on the oxidative processes of milk fat, were studied. Mathematical modeling of experimental data on the study of the effect of dihydroquercetin on the viability of microorganisms with probiotic properties was carried out. The normalization of the complex of obtained results on the study of the influence of the mass fraction of dihydroquercetin on the fermentation process was studied. Controlled factors characterizing the process of fermentation of model media with dihydroquercetin have been determined. A rationing of the dihydroquercetin complex of more than 0.50% was established; the target function decreases to its minimum value of 0.53 with a mass fraction of dihydroquercetin of 1.00%.

Annotation: On the territory of the Northern industrial zone of Pavlodar in the area of the industrial wastewater reservoir «Bylkyldak» in some areas of the earth there is soil contamination with mercury, exceeding the MPC for mercury (2.1 mg/kg) by 500 times. The total mass of mercury dispersed in the surface layer of soils is 2.8 tons. The mass of contaminated soil is approximately 208,000 tons. Pollution of the territory is historical. The purpose of the article is to determine the efficiency of chemical binding (immobilization) of mercury in the soil with the Japanese drug Denite® in real field conditions of the territory of mercury contamination in the Northern industrial zone of Pavlodar using an experimental study; to determine the stability of insoluble mercury compounds formed by the preparation at extreme winter and summer temperatures and seasonal fluctuations in open ground. Soil samples were taken for the study at 11 points in the centers of mercury pollution. Laboratory studies were carried out in an accredited analytical laboratory of the Testing Center of JSC Caustic. Soil samples were treated with Denite®, the preparations obtained were stabilized, and water extracts were prepared. The content of mercury in soils, extracts from them, and plants was determined by the atomic absorption method on a RA-915+ spectrometer equipped with RP-91 and RP-91S attachments. As a result of research, the effectiveness of Denite® in the chemical binding of mercury in the soil has been proven and its optimal dosages have been determined. As a result of the positive tests of the technology of chemical immobilization of mercury, the prospect of a practical solution to the issue of demercurization of mercury-contaminated soil on the territory of the Northern industrial zone appeared.

Annotation: The process of creating new forms is the key to choosing the combination of different textures for a unique aesthetic effect. Currently, various elements of the interior, including furniture and other decorative additions, are the basis for obtaining emotional balance, which is achieved between the functional purpose of the interior and its artistic and figurative concept. The main task in creating such objects is to create the most comfortable and harmonious atmosphere in the interior, regulating the mental processes of a person, which would cause exceptionally positive emotions and stimulate the creative development of users. The purpose is to consider the features of the use of epoxy resin in the design of interior objects and to study the importance of synthetic resins as a modern material for new ways of shaping in interior design and decoration. The methods used are: the use of formaldehyde resins as a modern, affordable, multifunctional material, the combination of resin with coloring and the use of various textures. Expansion of the range of interior elements in the manufacture of which epoxy resin is used. In this regard, it should be noted that the use of various resin compositions when creating design objects meets consumer requirements and complies with modern and latest trends. In this article, a brief study of such a polymeric material as epoxy resin was carried out. The properties of epoxy resin and how they affect the compositional solution, methods of its modification, and functional aspects of design from the point of view of manufacturing interior elements are described. The technologies for manufacturing modern products for decorative and applied purposes coated with epoxy resin are considered. In the process of researching technologies, a series of experiments are carried out to determine the structure of possible sequential actions, within which a technology will be studied and designed to ensure the safety of a new design product made of synthetic materials, then a constructive logic will be provided in which not only the functional properties of the object will not suffer, but also acquire valuable innovative value

Annotation: In order to successfully conduct agricultural work and obtain a competitive harvest, it is mandatory to carry out spraying operations of crops that require highly qualified personnel, expensive equipment and suitable weather conditions. The use of tractors for spraying fields is the most common solution available at the moment, has disadvantages: high cost, risk of damage to the crop by "hitting", "hooking" or otherwise; environmental damage; due to exhaust gases, the demolition of the solution increases with increasing speed. Using a device designed specifically for spraying equipment is an ideal solution. The purpose of the article is to develop a working model of an automated sprayer for processing agricultural crops. The methods used are: technical justification of a controlled device for processing agricultural crops. Calculation of functional capabilities, algorithms of operation of the proposed automated device: selection of the type of sprayer, engine, chassis, controller, battery, as well as justification of the possibilities of using alternative energy sources (wind energy, solar energy); development of a 3D model of an automation device for anti-weed processing of agricultural crops, printing of parts, assembly of mechanical and electronic parts. Making a prototype using 3D printing; development of the wiring diagram of electronics, software (firmware of the microcontroller; application that controls the settings), testing of the prototype, assembly of the current model; rationale for the optimal use of Arduino and Raspberry Pi boards in this device in a pair: Raspberry Pi will allow you to control processes on the Arduino and easily interact with the Internet when the Arduino itself will perform simple operations such as interacting with electronics and reading sensor readings. The manufactured operating model showed compliance with the goals, a high degree of controllability, environmental friendliness, reduction of energy consumed, labor resources and can be used to scale this device. The developed model of the automation device for anti-weed treatment of agricultural crops can be used not only in agricultural pollination, but also as a mechanism for studying soil parameters: humidity, mineralogical composition and chemical content in the ground, using electronic sensors, as well as an automated mobile platform for any purpose requiring accurate navigation through the territory.

Annotation: The main thesis of the proposed research is that in modern conditions of globalization, the realization of the right of citizens to education is an important and necessary condition for the development of society and the state. The right to education provides everyone with knowledge, skills, the development of creative abilities, guarantees the effective functioning of state and public institutions, national security, maintains stability in society and contributes to the development of a democratic, social rule of law state. The purpose of the study is to develop a holistic concept of constitutional and legal provision of the right to education in the Republic of Kazakhstan, taking into account international experience and developing proposals for improving domestic legislation regulating the right to education. The methodological basis is a system of philosophical and ideological approaches, principles, general scientific and special scientific methods that provided an objective analysis of the subject of research. The article substantiates that the state is also interested in ensuring the right to education for everyone, since it is education that creates qualified labor potential, provides training for professional specialists capable of effectively managing public affairs and performing its tasks. In turn, as a rule, an increase in the educational and qualification level of a person is the basis for salary growth, which affects the increase in tax deductions to the state budget, its filling, and therefore leads to economic growth of the state and society as a whole. The effective functioning of the education system in the state contributes to reducing unemployment (pupils, students belong to the category of the employed population), ensuring the vital activity of state institutions, national security, building a social state and establishing stability in society. Special attention in this article is paid to the implementation of scientific analysis of the right to education in the Republic of Kazakhstan in the context of modern international experience. The article makes a number of new theoretical conclusions and proposals, in particular: the signs of the right to education are classified into general (inherent in all categories of human and civil rights) and special (reveal the peculiarity of the right to education in the system of constitutional rights); the concept and content of the principles of the right to education are defined, what are the fundamental principles, ideas that determine its essence and the general direction of development.

Annotation: Main problem: in conditions of increasing competition, when characterizing commercial structures, a fundamental role is given to innovations, which occupy important place in economic life of the organization. Accordingly, the study of their essence and content is of particular importance for growth of competitiveness of organizations, which determines the relevance of study. Purpose: to investigate essence of innovation and innovation process in retrospect and in modern conditions as main prerequisite for improving competitiveness of commercial organizations. Achieving this purpose required solving following research tasks: to reveal the content of theoretical approaches to the study of the main aspects of interaction between business and government in modern science; the differences between the concepts of “novelty”, “know-how”, “innovation” are investigated; the relationship of the triad of concepts “novelty”, “know-how”, “innovation” is determined; concept of “innovation” has been studied in retrospect; concept of “innovation” in market economy is studied (foreign experience); approaches to definition of concept of "innovation" in international innovation theory and practice are defined; content of innovation process is presented, as well as author’s alternative scheme of innovation process; authorэs view on interpretation of concepts of “innovation”, “innovation process” in modern conditions is presented. Methods: theoretical and methodological basis was concepts, hypotheses and theories presented in works of domestic and foreign researchers. The methodology is based on systematic approach, within which methods of comparative, factorial, subject-object, structural-functional, statistical analysis and extrapolation have been applied. Results and their significance: article examines concepts of “innovation”, “innovation process” in retrospect and in modern aspect. Approaches to concept of "innovation" are systematized, an alternative scheme of innovation process is proposed. It is proved that in modern conditions innovation should be considered as process system reflecting all aspects of innovation process, main purpose of which is to achieve efficiency

Annotation: Significant air and water pollution, which is detrimental to the health of the citizens of Kazakhstan. Courts and regulatory authorities do not properly fulfill their obligations in the framework of environmental protection. Currently, government agencies are pursuing a policy aimed at protecting the environment and the rights of citizens. Purpose of the study is to analyze international models, practices, application of management systems for the legal protection of the environment and the health of citizens with application in Kazakhstan. The article discusses and explores a number of principles and methods of environmental management. Since these principles and practices contribute to the establishment of rational and effective environmental policy and management, it is proposed to take them into account when rethinking the current system in Kazakhstan. The article analyzes models and methods of legal protection of the environment and response to damage to the health of citizens, these tools can be part of an integrated system. Based on the study, it was found that in order for environmental management to reach its full potential, Kazakhstan also needs to undertake political reforms and involve ordinary citizens in the formation of policies and protection mechanisms. The studied strategies for collecting and taking into account the opinions of people when making managerial decisions on environmental protection can be used in Kazakhstani society.

Annotation: Language is the main vector of communication, in turn, communication develops languages throughout the history of mankind. The natural need of people is communication in their native language, the most convenient means of self-expression and understanding of others. However, modernity has changed the global paradigm of communication, indicating a reassessment of the role of languages by both official and informal communities, including native speakers of various languages. Moreover, the choice of a common communication language is influenced not only by the context, but also by the social, cultural, and economic characteristics of the communicants. In an intercultural context, there is a problem of adaptation of communication participants, closely related to the mastery of the language of the receiving party, ignorance of which is a barrier to successful communication. To develop the skills of tolerant communicative behavior, it is necessary to create special programs equipped with the necessary teaching materials available in international communication languages. Some of these workshops are offered in the presented article. Purpose of the article is to determine the influence of language on the development of economic processes that unite people of different linguistic and socio-cultural backgrounds, as well as to describe the influence of interacting languages on various aspects of professional activity and the role of education in introducing new generations into an intercultural context. To achieve the purpose, the following tasks were put forward: presentation of the main provisions of the economic theory of language; highlighting the controversial role of translators when working with companies in an intercultural environment; identification of problems and the role of teaching foreign languages to students for their successful adaptation in an intercultural professional context. The theoretical and methodological basis was the concepts, hypotheses and theories presented in the works of domestic and foreign researchers. The methodology is based on a systematic approach, in which methods of comparative, structural-functional, and statistical analysis were applied. To obtain empirical data, the methods of questioning and interviewing respondents included in the system of intercultural communication were used. Based on the results obtained, it can be said that, as a rule, in most cases, preference is given to the common language of communication, which is either one of the international languages or the language of the titular nation. Ethnic ties, trust and tolerance are often associated with the possession of a common language of communication.

Annotation: Main problem: in Kazakhstan, it is urgent to develop measures aimed at introduction and promotion of Corporate Social Responsibility (CSR) at all levels of Kazakh society, in order to strengthen sustainability of socio-economic development, active participation of business in social modernization and human capital development. In this regard, there is problem of forming effective mechanism of social responsibility, as well as the implementation of principles of corporate social responsibility in management practice of domestic companies. Purpose: this study aims to determine the main stages of the development of CSR in business in Kazakhstan in the specific context the domestic business sector. Methods: methods of systematic, comparative and statistical analysis and of expert assessments were used. Expert survey, document analysis, secondary analysis of sociological research, case study method were used as empirical research methods. The analysis of documents was performed to study the legislative and regulatory frameworks that determine practices of implementing interaction between business and government in modern states. To identify and characterize models of CSR implementation, method of secondary data from a number of foreign comparative studies was applied. Case study method allowed identifying empirical cases of effective implementation of mechanisms of social public-private partnership in field of social investments by domestic business structures. Results and their significance: in the article, based on study of domestic and foreign experience, mechanism of interaction between business and government in solving problems of regional economic systems was considered. Main stages of evolution of CSR practices in Kazakhstan were identified and characterized, structural (subjects, institutions) and regulatory (legislation, strategies, programs, standards) components of interaction between business and government in solving problems of region in modern conditions are established. In addition, main differences between domestic CSR system and European model are considered, general characteristics of which are given in article.