Annotation: In modern science, there are a large number of techniques focused on the assessment of competitiveness through the analysis of certain resources in the region. However, accounting of human resources in such assessments is not used as a prior factor in identifying regional competitive advantages. Competitive advantages affect not only the efficiency of individual sectors of the economy but also the overall social and economic development of the country. Evaluation of the competitiveness of the region should include one of the main parameters of the human resource and economic development level. Therefore, the forecast for the competitiveness of the region should take into account the pace of human resources development. The purpose of the research is evaluation of regions’ competitiveness as the main parameter of economic development in current conditions. The methods used in Kazakhstan for assessing the competitiveness of a region considers only the assessment of human resources in its structure but do not take into account the level of their development over time, as well as the multi-factorial nature of their components. The work explains and analyzes rating model for assessing of the competitiveness of the regions of Kazakhstan (the National Chamber of Entrepreneurs of the Republic of Kazakhstan). The authors propose a methodology for ranking the regions of Kazakhstan based on an assessment of the development of their human resources that affect the competitiveness of the region. It includes an analysis of demographic, labor and social and economic indicators reflecting the state of human resources.

Annotation: The concept of resilience, the ability to withstand crises and adversities and recover from them, has valuable potential for research, intervention and preventive approaches aimed at strengthening the family. There are many paths to relationship resilience, varying depending on different forms of family, psychosocial problems, resources and constraints. Shared beliefs that promote alignment and cooperation are vital to overcoming adversity. Measures to increase the resilience of families are of timely importance to overcome the rapid social changes and uncertainties that families face today. According to research by sociologists and family consultants, each family goes through several stages of development, and the transition from one to another is usually accompanied by a crisis. It is generally believed that domestic difficulties lead to complications in family life, first of all. The purpose is to identify the types of problems and causes leading to crisis situations in marriage. In this regard, the methods such as analysis of literary sources on this topic, generalization, synthesis, psychological experiment, diagnosis of the psychology of family crisis by H.I. Olioirovia, T.A. Zinkevii-Kuzemkin, T.F. Velenta were used. The authors of the article come to the conclusion that stress is a part of life, and the slings and arrows of misfortune hit all families throughout their lives. The concept of family resilience confirms the reparative potential of all families and offers a valuable basis for research and clinical practice. Just as families face a variety of challenges, there are many ways to increase family resilience. By understanding key processes, clinicians can mobilize untapped resources, allowing families in distress to cope with difficulties more effectively and recover through their mutual support and cooperation. Therefore, it is necessary to understand the patterns of crisis situations and the socio-psychological causes of their occurrence.

Annotation: Das Hauptproblem: die allgegenwärtige Einführung von Informationstechnologien führt zu erheblichen Veränderungen in verschiedenen Bereichen der menschlichen Tätigkeit. Auch der Bildungsbereich ist keine Ausnahme. In diesem Zusammenhang hat der Autor in diesem Artikel ein aktuelles Problem behandelt, das in der Entwicklung elektronischer Lehrmittel liegt und eine der aktuellen und vielversprechenden Richtungen der Informatisierung des Bildungsprozesses ist. Es wurden die Arbeiten von Wissenschaftlern S.S. Sysoeva, V.M. Kuharenko, A.I. Bashmakova, T.I. Koval, E.S. Polat, A.Y. Uvarova, P.I. Serdjukow, A.A. Andreev analysiert. Diese Arbeiten enthalten Anforderungen an die Entwicklung elektronischer Lehrmittel. Nach der Analyse beschrieb der Autor die Entwicklungsschritte von elektronischen Lernprogrammen, die Prinzipien, denen sie entsprechen sollten, und führte eine Liste der Module an, aus denen das elektronische Lernprogramm bestehen sollte. Aus der vorhandenen Vielfalt an Softwarekomplexen hebt der Autor CourseLab, Smart Builder, MOS Solo, Google Sites, iSpring Suite, TurboSite, Adobe Animate, HTML5 hervor. Die Entwicklung von elektronischen Lehrmitteln für die vom Autor des Artikels vorgestellte Technologie und deren anschließende Anwendung im Bildungsprozess wird dazu beitragen, die Lehr- und kognitive Aktivität der Lernenden auf einem effizienteren Niveau zu organisieren. Zweck: beschreibung der Technologie zur Entwicklung von elektronischen Lernprogrammen unter Berücksichtigung bestehender Anforderungen. Methoden: der Artikel verwendete Methoden zur Analyse, Synthese und Abzug. Die Analyse der Anforderungen und Prinzipien für die Entwicklung elektronischer Lernprogramme basiert auf einer deskriptiven und analytischen Methode. Ergebnisse und ihre Bedeutung: das praktische Ergebnis der vorgeschlagenen Technologie war das entwickelte elektronische Lernprogramm «Entwicklung mobiler Anwendungen». Die Ergebnisse der Studie haben neben der theoretischen Bedeutung auch eine praktische Bedeutung, die in einer positiven Dynamik liegt, um den Widerspruch zwischen dem ständig wachsenden Informationsfluss und der begrenzten Fähigkeit der Lernenden, ihn zu erlernen, zu lösen. Die bewusste Verwendung elektronischer Lehrmittel im Lernprozess ist eine grundlegende Möglichkeit, die Bildungsqualität zu verbessern, indem die verwendeten Unterrichtsmethoden und -techniken in Richtung Individualisierung und Fokussierung auf den Lernenden geändert werden.

Annotation: Based on the psychological aspect of the concept of "qualification", the article analyzes the main directions of the formation of methodological qualifications of future teachers of mathematics and advanced training in pedagogical universities. It is possible to achieve high-quality teaching of geometric subjects in higher educational institutions by using methodological and meaningful methods in organizing the educational process. The creation of a certain structure of the educational process, the definition of teaching methods and means, the careful selection of subject content were determined by the specific principles of pedagogy. Basically, these principles are the real achievements of modern pedagogy and are constantly changing. The existing system of didactic principles can be gradually changed and expanded The purpose is to choose the main didactic principles and to offer a scientific-methodological basis for improving the methodological preparation of future mathematics teachers in the Pedagogical University for solving and teaching geometrical problems. In this regard, interviews, questionnaires, analysis of the curriculum and its content, as well as discussions with experienced teachers and methodologists in teaching geometry were conducted; pedagogical control and diagnostics of the educational process were carried out. In order to test the effectiveness of the methods proposed by us, pedagogical experiments were carried out. The entire system of training future teachers of mathematics faces new challenges related to the implementation of effective didactic principles for teaching geometry in pedagogical universities. First of all, it is the principle of mastering innovative teaching methods of the future teacher of mathematics and the principle of mastering new pedagogical and information technologies of education. The results of the study can be used as a methodological basis for further research on the professional orientation of teaching mathematics in universities.

Annotation: The article examines the emergence and functioning of the Soviet institutions of power in Kazakhstan during the period of "war communism". On the basis of archival materials and published works, the author analyzes the activities of Soviets and revolutionary committees. The purpose of the article is to study the main trends and features of the development of local government in Kazakhstan in 1918-1921. The study is based on the principles of historical, scientific objectivity and systemic structural-functional analysis. For this reason, the author used such methods as the method of historical reconstruction for the reorganization of the administration of Soviet, party and other local bodies; the method of isolation for the study of local (regional) features in relation to local phenomena and processes in the energy sector; the method of typology, which made it possible to identify and describe different types of local authorities. The authors come to the conclusion that in 1918-1921, during the period of civil resistance, "war communism" and the beginning of the Chamber of Commerce and Industry, bodies of the new Soviet power appeared and operated in Kazakhstan. They are characterized as having an anti-democratic character; strict social orientation; alienation of indigenous peoples; immanent nature for creating conflict situations; choosing non-optimal ways and means of solving a problem situation; unification of party and state. As a result, an overgrown and clumsy class of party classification was formed, which was not provided for by the Constitution of the USSR.

Annotation: Injuries among domestic animals account for 50-70 % of all non-communicable diseases. Fractures of bones, mainly limbs, occur in 44.5 % of cases. The main goal of fracture treatment is to restore normal function and movement of the limb, and the ways in which this is done are varied. Preference is given to methods that do not constrain the movement of the limb, allowing the animal to use it during the treatment period. Purpose: This article discusses the method of bone osteosynthesis, which has proven itself in the treatment of bone fractures, and is relevant today in veterinary medicine. The main study was conducted on the basis of the veterinary clinic "Shans" in Pavlodar. For osteosynthesis, plates for osteosynthesis and screws made of titanium alloy were used. This is due to the fact that when in contact with each other, the metal that fixes bone fragments can oxidize. Animals come to the clinic as a result of injuries that lead to fractures. The most common causes include falls from a height, motor vehicles, careless or rough handling of animals, and contact with other animals. When a fracture is established by obvious signs or if a fracture is suspected, such patients are preliminarily sent for x-rays. Upon receipt of an X-ray image and with the consent of the owner of the animal, osteosynthesis is performed. When accessing bone fragments, the incision was made along the muscle fibers. Osteosynthesis was performed according to the method described by V.M. Shapovalov (2009). The general condition of the animals after osteosynthesis was restored after 3-5 days. All animals, after bone osteosynthesis, completely relied on the limb. Contractures of adjacent joints and muscle atrophy were not determined. Plain osteosynthesis of the femur, in the presence of the necessary instrument and consumables, is not very difficult to perform. Performing bone osteosynthesis in the early stages makes it possible to include the limb in the locomotory act, as a result of which the animal actively uses the limb during the rehabilitation period.

Annotation: Main problem: At present, service, decorative and hunting dog breeding is intensively developing in Russia and in the Tula region. So, in 2020, 119 high-breed puppies were registered in the Book of Pedigree Breeding, and in 2021 already 164 puppies, mostly decorative and service breeds. Thus, the number of pedigreed dogs susceptible to various infectious diseases is increasing annually. Canine distemper is one of the most widespread viral diseases of dogs all over the world, including in Russia. Analyzing the "Patient Admission Logs" of veterinary clinics in the city of Tula, it was found that 44 % of dogs that fell ill with diseases of infectious etiology were diagnosed with canine distemper. Purpose: The aim of our research was to study the epizootological features of the course of canine distemper among dogs in the Tula region of Russia. To achieve the intended goal, it was necessary to solve the following problem: to analyze the breed and age factors for the incidence of canine distemper. Methods: Analysis of data from private veterinary clinics reporting on the incidence of small domestic animals was used. Results and their significance: As a result of studying the epizootic situation of canine distemper among dogs, the following data were obtained: The disease is observed throughout the year and has the character of undamped fluctuations subject to sharp seasonal changes. The maximum number of diseased dogs in all years of observation is recorded in March - 6.2 cases per 1000 individuals. It has been established that among the infectious diseases of dogs, distemper occupies the first place, and there is an annual increase in the number of dogs with distemper.

Annotation: In modern conditions, the problem of the incidence of cows with high productivity in the postpartum period is relevant. It is these animals that are more susceptible to various diseases, primarily due to violations of the technology of keeping and feeding, weak body resistance, heavy loads during fruiting and milk production. It is known that as a result of various metabolic disorders, calving of cows in farms proceeds with various deviations. The lack of calcium in the blood due to hormonal disorders leads to hypocalcemia and paresis after calving, which is often the cause of death of animals. Therefore, the improvement of prevention schemes and treatment of puerperal paresis in cows is very relevant. Purpose of the article – Improvement of preventive and therapeutic measures for postpartum paresis in cows on the basis of the Tassu farm in Akmola district. The work was carried out under production conditions on a livestock farm in the Akmola region, in the farm "Tassu" in the spring and summer. The object of the study were black-motley cows with a pregnancy period of 250-260 days. 22 animals were selected in the experimental group, 12 animals in the control group. The average weight of animals is 567 ± 34.5 kg, age 5-6 years. The cows of the experimental group received injections of the drug Karsulen, which included: 2 % Cardus marianus D3, 1 % Sulfur D6 and 1 % Arsenycum album D6. Karsulen was administered to cows intramuscularly or subcutaneously at the rate of 1 ml per 100 kg of animal weight, the dose volume should not be less than 5 ml per animal. In the postpartum period, in the complex therapy of postpartum paresis in cows, Karsulen is used intramuscularly or subcutaneously 1-2 times a day. The use of the drug Karsulen with the composition: 1 % Cardus marianus D3, 1 % Sulfur D6 and 1 % Arsenycum album D6 has a regulatory effect on protein, carbohydrate, fat metabolism, restores impaired function of the gastrointestinal tract, liver and kidneys.

Annotation: Main problem: It is very important for each company to obtain an industrial certificate, which makes it possible to get into the Register of Domestic Manufacturers, as they expect to receive large orders. With the receipt of an industrial certificate, their prospects for participation in various tenders and purchases will significantly increase, where they can show their abilities, compete with domestic producers, and also have an advantage over importers. Since July 1, 2019, the industrial certificate has become mandatory for participation in public procurement. Corresponding changes to the rules for public procurement were made by the Ministry of Finance of the Republic of Kazakhstan. Taking into account the experience of the «Rules for determining the country of origin of goods, issuing a certificate of origin of goods and canceling its validity», approved by Order of the Acting Minister for Investment and Development of the Republic of Kazakhstan dated February 24, 2015. No. 155», it becomes clear that the document does not take into account a number of «narrow» specifics of individual industries. Purpose: development of amendments and additions to the «Rules for the formation and maintenance of the register of domestic producers of goods, works and services, as well as the issuance of an Industrial Certificate» for the subsequent possibility of obtaining an Industrial Certificate by a chemical industry enterprise for the production of mineral fertilizers. Methods: study and analysis of literary sources, statistics and modeling of the procedure for issuing an Industrial Certificate. Results and their significance: the problems of application were studied, ways to solve these problems were found, and amendments and additions to the “Rules for the formation and maintenance of the register of domestic producers of goods, works and services, as well as the issuance of an industrial certificate” were developed. At the moment, the Rules need to be carefully finalized. It is necessary to consider this issue together with authorized state bodies, associations and business representatives, since obtaining an Industrial Certificate will directly affect participation in public procurement, and, accordingly, the economy of the Republic of Kazakhstan.

Annotation: The main problem: Modern research in the development of fermented milk products is focused on increasing the bioavailability of milk components, as well as the use of bacterial components of sourdough, which increase health properties. The use of the fermentation process of skimmed milk with a combined starter consisting of traditional for cottage cheese and starter cultures of probiotic cultures immobilized in a gel of biopolymers is very important. Purpose: The purpose of this study is to determine the optimal amount of starter, consisting of an association of probiotic cultures immobilized in a gel of biopolymers (membranes) to be added to fermented skimmed milk in order to enrich it with functional ingredients. Methods: A one-factor experiment was used. The culture association Propionibacterium freudenreichii subsp. was used as a regulatory factor. Shermanii, Bifidobacterium lactis and Streptococcus thermophilus, immobilized in a biopolymer gel, added to skimmed milk in the form of membranes (determined as a percentage of the mass of fermented milk). Controlled factors are the main indicators characterizing the efficiency of the skim milk fermentation process; these are active acidity, the logarithm of the number of viable cells of bifidobacteria, the logarithm of the number of viable cells of propionic acid bacteria, and organoleptic evaluation. Results and their significance: Based on the results of a mathematical analysis of the totality of values of controlled factors depending on the amount of starter cultures of probiotic cultures, mathematical models were built to determine the degree of influence of the starter on the quality indicators of the product, using the Table Curve 3D-v4 mathematical computer program.